Граф коммитов

253 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds a50243b1dd 5.1 Merge Window Pull Request
This has been a slightly more active cycle than normal with ongoing core
 changes and quite a lot of collected driver updates.
 
 - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
 
 - A new data transfer mode for HFI1 giving higher performance
 
 - Significant functional and bug fix update to the mlx5 On-Demand-Paging MR
   feature
 
 - A chip hang reset recovery system for hns
 
 - Change mm->pinned_vm to an atomic64
 
 - Update bnxt_re to support a new 57500 chip
 
 - A sane netlink 'rdma link add' method for creating rxe devices and fixing
   the various unregistration race conditions in rxe's unregister flow
 
 - Allow lookup up objects by an ID over netlink
 
 - Various reworking of the core to driver interface:
   * Drivers should not assume umem SGLs are in PAGE_SIZE chunks
   * ucontext is accessed via udata not other means
   * Start to make the core code responsible for object memory
     allocation
   * Drivers should convert struct device to struct ib_device
     via a helper
   * Drivers have more tools to avoid use after unregister problems
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAlyAJYYACgkQOG33FX4g
 mxrWwQ/+OyAx4Moru7Aix0C6GWxTJp/wKgw21CS3reZxgLai6x81xNYG/s2wCNjo
 IccObVd7mvzyqPdxOeyHBsJBbQDqWvoD6O2duH8cqGMgBRgh3CSdUep2zLvPpSAx
 2W1SvWYCLDnCuarboFrCA8c4AN3eCZiqD7z9lHyFQGjy3nTUWzk1uBaOP46uaiMv
 w89N8EMdXJ/iY6ONzihvE05NEYbMA8fuvosKLLNdghRiHIjbMQU8SneY23pvyPDd
 ZziPu9NcO3Hw9OVbkwtJp47U3KCBgvKHmnixyZKkikjiD+HVoABw2IMwcYwyBZwP
 Bic/ddONJUvAxMHpKRnQaW7znAiHARk21nDG28UAI7FWXH/wMXgicMp6LRcNKqKF
 vqXdxHTKJb0QUR4xrYI+eA8ihstss7UUpgSgByuANJ0X729xHiJtlEvPb1DPo1Dz
 9CB4OHOVRl5O8sA5Jc6PSusZiKEpvWoyWbdmw0IiwDF5pe922VLl5Nv88ta+sJ38
 v2Ll5AgYcluk7F3599Uh9D7gwp5hxW2Ph3bNYyg2j3HP4/dKsL9XvIJPXqEthgCr
 3KQS9rOZfI/7URieT+H+Mlf+OWZhXsZilJG7No0fYgIVjgJ00h3SF1/299YIq6Qp
 9W7ZXBfVSwLYA2AEVSvGFeZPUxgBwHrSZ62wya4uFeB1jyoodPk=
 =p12E
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "This has been a slightly more active cycle than normal with ongoing
  core changes and quite a lot of collected driver updates.

   - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe

   - A new data transfer mode for HFI1 giving higher performance

   - Significant functional and bug fix update to the mlx5
     On-Demand-Paging MR feature

   - A chip hang reset recovery system for hns

   - Change mm->pinned_vm to an atomic64

   - Update bnxt_re to support a new 57500 chip

   - A sane netlink 'rdma link add' method for creating rxe devices and
     fixing the various unregistration race conditions in rxe's
     unregister flow

   - Allow lookup up objects by an ID over netlink

   - Various reworking of the core to driver interface:
       - drivers should not assume umem SGLs are in PAGE_SIZE chunks
       - ucontext is accessed via udata not other means
       - start to make the core code responsible for object memory
         allocation
       - drivers should convert struct device to struct ib_device via a
         helper
       - drivers have more tools to avoid use after unregister problems"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
  net/mlx5: ODP support for XRC transport is not enabled by default in FW
  IB/hfi1: Close race condition on user context disable and close
  RDMA/umem: Revert broken 'off by one' fix
  RDMA/umem: minor bug fix in error handling path
  RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
  cxgb4: kfree mhp after the debug print
  IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
  IB/rdmavt: Fix loopback send with invalidate ordering
  IB/iser: Fix dma_nents type definition
  IB/mlx5: Set correct write permissions for implicit ODP MR
  bnxt_re: Clean cq for kernel consumers only
  RDMA/uverbs: Don't do double free of allocated PD
  RDMA: Handle ucontext allocations by IB/core
  RDMA/core: Fix a WARN() message
  bnxt_re: fix the regression due to changes in alloc_pbl
  IB/mlx4: Increase the timeout for CM cache
  IB/core: Abort page fault handler silently during owning process exit
  IB/mlx5: Validate correct PD before prefetch MR
  IB/mlx5: Protect against prefetch of invalid MR
  RDMA/uverbs: Store PR pointer before it is overwritten
  ...
2019-03-09 15:53:03 -08:00
Linus Torvalds 1fc1cd8399 Merge branch 'for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:

 - Oleg's pids controller accounting update which gets rid of rcu delay
   in pids accounting updates

 - rstat (cgroup hierarchical stat collection mechanism) optimization

 - Doc updates

* 'for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: remove unused task_has_mempolicy()
  cgroup, rstat: Don't flush subtree root unless necessary
  cgroup: add documentation for pids.events file
  Documentation: cgroup-v2: eliminate markup warnings
  MAINTAINERS: Update cgroup entry
  cgroup/pids: turn cgroup_subsys->free() into cgroup_subsys->release() to fix the accounting
2019-03-07 10:11:41 -08:00
Johannes Weiner dc50537bdd kernel: cgroup: add poll file operation
Cgroup has a standardized poll/notification mechanism for waking all
pollers on all fds when a filesystem node changes.  To allow polling for
custom events, add a .poll callback that can override the default.

This is in preparation for pollable cgroup pressure files which have
per-fd trigger configurations.

Link: http://lkml.kernel.org/r/20190124211518.244221-3-surenb@google.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:17 -08:00
Linus Torvalds 6456300356 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Here we go, another merge window full of networking and #ebpf changes:

   1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP
      range without dealing with floods of ARP traffic, from Linus
      Lüssing.

   2) Throttle buffered multicast packet transmission in mt76, from
      Felix Fietkau.

   3) Support adaptive interrupt moderation in ice, from Brett Creeley.

   4) A lot of struct_size conversions, from Gustavo A. R. Silva.

   5) Add peek/push/pop commands to bpftool, as well as bash completion,
      from Stanislav Fomichev.

   6) Optimize sk_msg_clone(), from Vakul Garg.

   7) Add SO_BINDTOIFINDEX, from David Herrmann.

   8) Be more conservative with local resends due to local congestion,
      from Yuchung Cheng.

   9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata.

  10) Add health buffer support to devlink, from Eran Ben Elisha.

  11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen.

  12) Add statistics to basic packet scheduler filter, from Cong Wang.

  13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan.

  14) Lots of new IP tunneling forwarding tests, also from Nir Dotan.

  15) Add 3ad stats to bonding, from Nikolay Aleksandrov.

  16) Lots of probing improvements for bpftool, from Quentin Monnet.

  17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski.

  18) Allow #ebpf programs to access gso_segs from skb shared info, from
      Eric Dumazet.

  19) Add sock_diag support for AF_XDP sockets, from Björn Töpel.

  20) Support 22260 iwlwifi devices, from Luca Coelho.

  21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov.

  22) Add JMP32 instruction class support to #ebpf, from Jiong Wang.

  23) Add spinlock support to #ebpf, from Alexei Starovoitov.

  24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson.

  25) Add device infomation API to devlink, from Jakub Kicinski.

  26) Add new timestamping socket options which are y2038 safe, from
      Deepa Dinamani.

  27) Add RX checksum offloading for various sh_eth chips, from Sergei
      Shtylyov.

  28) Flow offload infrastructure, from Pablo Neira Ayuso.

  29) Numerous cleanups, improvements, and bug fixes to the PHY layer
      and many drivers from Heiner Kallweit.

  30) Lots of changes to try and make packet scheduler classifiers run
      lockless as much as possible, from Vlad Buslov.

  31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows.

  32) Add concurrency tests to tc-tests infrastructure, from Vlad
      Buslov.

  33) Add hwmon support to aquantia, from Heiner Kallweit.

  34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet.

  And I would be remiss if I didn't thank the various major networking
  subsystem maintainers for integrating much of this work before I even
  saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso,
  Johannes Berg, Kalle Valo, and many others. Thank you!"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits)
  net/sched: avoid unused-label warning
  net: ignore sysctl_devconf_inherit_init_net without SYSCTL
  phy: mdio-mux: fix Kconfig dependencies
  net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg
  net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework
  selftest/net: Remove duplicate header
  sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
  net/mlx5e: Update tx reporter status in case channels were successfully opened
  devlink: Add support for direct reporter health state update
  devlink: Update reporter state to error even if recover aborted
  sctp: call iov_iter_revert() after sending ABORT
  team: Free BPF filter when unregistering netdev
  ip6mr: Do not call __IP6_INC_STATS() from preemptible context
  isdn: mISDN: Fix potential NULL pointer dereference of kzalloc
  net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs
  cxgb4/chtls: Prefix adapter flags with CXGB4
  net-sysfs: Switch to bitmap_zalloc()
  mellanox: Switch to bitmap_zalloc()
  bpf: add test cases for non-pointer sanitiation logic
  mlxsw: i2c: Extend initialization by querying resources data
  ...
2019-03-05 08:26:13 -08:00
David Howells 06a2ae56b5 vfs: Add some logging to the core users of the fs_context log
Add some logging to the core users of the fs_context log so that
information can be extracted from them as to the reason for failure.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-28 03:29:38 -05:00
David Howells a187537473 cpuset: Use fs_context
Make the cpuset filesystem use the filesystem context.  This is potentially
tricky as the cpuset fs is almost an alias for the cgroup filesystem, but
with some special parameters.

This can, however, be handled by setting up an appropriate cgroup
filesystem and returning the root directory of that as the root dir of this
one.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-28 03:29:35 -05:00
David Howells 23bf1b6be9 kernfs, sysfs, cgroup, intel_rdt: Support fs_context
Make kernfs support superblock creation/mount/remount with fs_context.

This requires that sysfs, cgroup and intel_rdt, which are built on kernfs,
be made to support fs_context also.

Notes:

 (1) A kernfs_fs_context struct is created to wrap fs_context and the
     kernfs mount parameters are moved in here (or are in fs_context).

 (2) kernfs_mount{,_ns}() are made into kernfs_get_tree().  The extra
     namespace tag parameter is passed in the context if desired

 (3) kernfs_free_fs_context() is provided as a destructor for the
     kernfs_fs_context struct, but for the moment it does nothing except
     get called in the right places.

 (4) sysfs doesn't wrap kernfs_fs_context since it has no parameters to
     pass, but possibly this should be done anyway in case someone wants to
     add a parameter in future.

 (5) A cgroup_fs_context struct is created to wrap kernfs_fs_context and
     the cgroup v1 and v2 mount parameters are all moved there.

 (6) cgroup1 parameter parsing error messages are now handled by invalf(),
     which allows userspace to collect them directly.

 (7) cgroup1 parameter cleanup is now done in the context destructor rather
     than in the mount/get_tree and remount functions.

Weirdies:

 (*) cgroup_do_get_tree() calls cset_cgroup_from_root() with locks held,
     but then uses the resulting pointer after dropping the locks.  I'm
     told this is okay and needs commenting.

 (*) The cgroup refcount web.  This really needs documenting.

 (*) cgroup2 only has one root?

Add a suggestion from Thomas Gleixner in which the RDT enablement code is
placed into its own function.

[folded a leak fix from Andrey Vagin]

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Tejun Heo <tj@kernel.org>
cc: Li Zefan <lizefan@huawei.com>
cc: Johannes Weiner <hannes@cmpxchg.org>
cc: cgroups@vger.kernel.org
cc: fenghua.yu@intel.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-28 03:29:34 -05:00
Al Viro cca8f32714 cgroup: store a reference to cgroup_ns into cgroup_fs_context
... and trim cgroup_do_mount() arguments (renaming it to cgroup_do_get_tree())

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-28 03:29:34 -05:00
Al Viro 6678889f07 cgroup1_get_tree(): separate "get cgroup_root to use" into a separate helper
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-28 03:29:33 -05:00
Al Viro 71d883c37e cgroup_do_mount(): massage calling conventions
pass it fs_context instead of fs_type/flags/root triple, have
it return int instead of dentry and make it deal with setting
fc->root.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-28 03:29:33 -05:00
Al Viro cf6299b1d0 cgroup: stash cgroup_root reference into cgroup_fs_context
Note that this reference is *NOT* contributing to refcount of
cgroup_root in question and is valid only until cgroup_do_mount()
returns.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-28 03:29:32 -05:00
Al Viro e34a98d5b2 cgroup2: switch to option-by-option parsing
[again, carved out of patch by dhowells]
[NB: we probably want to handle "source" in parse_param here]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-28 03:29:31 -05:00
Al Viro 8d2451f499 cgroup1: switch to option-by-option parsing
[dhowells should be the author - it's carved out of his patch]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-28 03:29:31 -05:00
Al Viro f5dfb5315d cgroup: take options parsing into ->parse_monolithic()
Store the results in cgroup_fs_context.  There's a nasty twist caused
by the enabling/disabling subsystems - we can't do the checks sensitive
to that until cgroup_mutex gets grabbed.  Frankly, these checks are
complete bullshit (e.g. all,none combination is accepted if all subsystems
are disabled; so's cpusets,none and all,cpusets when cpusets is disabled,
etc.), but touching that would be a userland-visible behaviour change ;-/

So we do parsing in ->parse_monolithic() and have the consistency checks
done in check_cgroupfs_options(), with the latter called (on already parsed
options) from cgroup1_get_tree() and cgroup1_reconfigure().

Freeing the strdup'ed strings is done from fs_context destructor, which
somewhat simplifies the life for cgroup1_{get_tree,reconfigure}().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-28 03:29:30 -05:00
Al Viro 7feeef5869 cgroup: fold cgroup1_mount() into cgroup1_get_tree()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-28 03:29:30 -05:00
Al Viro 90129625d9 cgroup: start switching to fs_context
Unfortunately, cgroup is tangled into kernfs infrastructure.
To avoid converting all kernfs-based filesystems at once,
we need to untangle the remount part of things, instead of
having it go through kernfs_sop_remount_fs().  Fortunately,
it's not hard to do.

This commit just gets cgroup/cgroup1 to use fs_context to
deliver options on mount and remount paths.  Parsing those
is going to be done in the next commits; for now we do
pretty much what legacy case does.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-28 03:29:29 -05:00
Masahiro Yamada 6a613d24ef cpuset: remove unused task_has_mempolicy()
This is a remnant of commit 5f155f27cb ("mm, cpuset: always use
seqlock when changing task's nodemask").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2019-02-19 06:26:02 -08:00
Tejun Heo b4ff1b44bc cgroup, rstat: Don't flush subtree root unless necessary
cgroup_rstat_cpu_pop_updated() is used to traverse the updated cgroups
on flush.  While it was only visiting updated ones in the subtree, it
was visiting @root unconditionally.  We can easily check whether @root
is updated or not by looking at its ->updated_next just as with the
cgroups in the subtree.

* Remove the unnecessary cgroup_parent() test.  The system root cgroup
  is never updated and thus its ->updated_next is always NULL.  No
  need to test whether cgroup_parent() exists in addition to
  ->updated_next.

* Terminate traverse if ->updated_next is NULL.  This can only happen
  for subtree @root and there's no reason to visit it if it's not
  marked updated.

This reduces cpu consumption when reading a lot of rstat backed files.
In a micro benchmark reading stat from ~1600 cgroups, the sys time was
lowered by >40%.

Signed-off-by: Tejun Heo <tj@kernel.org>
2019-02-15 11:01:31 -08:00
Oleg Nesterov 51bee5abea cgroup/pids: turn cgroup_subsys->free() into cgroup_subsys->release() to fix the accounting
The only user of cgroup_subsys->free() callback is pids_cgrp_subsys which
needs pids_free() to uncharge the pid.

However, ->free() is called from __put_task_struct()->cgroup_free() and this
is too late. Even the trivial program which does

	for (;;) {
		int pid = fork();
		assert(pid >= 0);
		if (pid)
			wait(NULL);
		else
			exit(0);
	}

can run out of limits because release_task()->call_rcu(delayed_put_task_struct)
implies an RCU gp after the task/pid goes away and before the final put().

Test-case:

	mkdir -p /tmp/CG
	mount -t cgroup2 none /tmp/CG
	echo '+pids' > /tmp/CG/cgroup.subtree_control

	mkdir /tmp/CG/PID
	echo 2 > /tmp/CG/PID/pids.max

	perl -e 'while ($p = fork) { wait; } $p // die "fork failed: $!\n"' &
	echo $! > /tmp/CG/PID/cgroup.procs

Without this patch the forking process fails soon after migration.

Rename cgroup_subsys->free() to cgroup_subsys->release() and move the callsite
into the new helper, cgroup_release(), called by release_task() which actually
frees the pid(s).

Reported-by: Herton R. Krzesinski <hkrzesin@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2019-01-31 06:55:57 -08:00
Valdis Kletnieks 1832f4ef58 bpf, cgroups: clean up kerneldoc warnings
Building with W=1 reveals some bitrot:

  CC      kernel/bpf/cgroup.o
kernel/bpf/cgroup.c:238: warning: Function parameter or member 'flags' not described in '__cgroup_bpf_attach'
kernel/bpf/cgroup.c:367: warning: Function parameter or member 'unused_flags' not described in '__cgroup_bpf_detach'

Add a kerneldoc line for 'flags'.

Fixing the warning for 'unused_flags' is best approached by
removing the unused parameter on the function call.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-31 10:32:01 +01:00
Parav Pandit 7527a7b157 IB/core: Simplify rdma cgroup registration
RDMA cgroup registration routine always returns success, so simplify
function to be void and run clang formatter over whole CONFIG_CGROUP_RDMA
art of core_priv.h.

This reduces unwinding error path for regular registration and future net
namespace change functionality for rdma device.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-18 13:43:10 -07:00
Al Viro 35ac118424 cgroup: saner refcounting for cgroup_root
* make the reference from superblock to cgroup_root counting -
do cgroup_put() in cgroup_kill_sb() whether we'd done
percpu_ref_kill() or not; matching grab is done when we allocate
a new root.  That gives the same refcounting rules for all callers
of cgroup_do_mount() - a reference to cgroup_root has been grabbed
by caller and it either is transferred to new superblock or dropped.

* have cgroup_kill_sb() treat an already killed refcount as "just
don't bother killing it, then".

* after successful cgroup_do_mount() have cgroup1_mount() recheck
if we'd raced with mount/umount from somebody else and cgroup_root
got killed.  In that case we drop the superblock and bugger off
with -ERESTARTSYS, same as if we'd found it in the list already
dying.

* don't bother with delayed initialization of refcount - it's
unreliable and not needed.  No need to prevent attempts to bump
the refcount if we find cgroup_root of another mount in progress -
sget will reuse an existing superblock just fine and if the
other sb manages to die before we get there, we'll catch
that immediately after cgroup_do_mount().

* don't bother with kernfs_pin_sb() - no need for doing that
either.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-01-17 11:53:02 -05:00
Al Viro 399504e21a fix cgroup_do_mount() handling of failure exits
same story as with last May fixes in sysfs (7b745a4e40
"unfuck sysfs_mount()"); new_sb is left uninitialized
in case of early errors in kernfs_mount_ns() and papering
over it by treating any error from kernfs_mount_ns() as
equivalent to !new_ns ends up conflating the cases when
objects had never been transferred to a superblock with
ones when that has happened and resulting new superblock
had been dropped.  Easily fixed (same way as in sysfs
case).  Additionally, there's a superblock leak on
kernfs_node_dentry() failure *and* a dentry leak inside
kernfs_node_dentry() itself - the latter on probably
impossible errors, but the former not impossible to trigger
(as the matter of fact, injecting allocation failures
at that point *does* trigger it).

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-01-17 11:52:49 -05:00
Linus Torvalds 6f9d71c9c7 Merge branch 'for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:

 - Waiman's cgroup2 cpuset support has been finally merged closing one
   of the last remaining feature gaps.

 - cgroup.procs could show non-leader threads when cgroup2 threaded mode
   was used in certain ways. I forgot to push the fix during the last
   cycle.

 - A patch to fix mount option parsing when all mount options have been
   consumed by someone else (LSM).

 - cgroup_no_v1 boot param can now block named cgroup1 hierarchies too.

* 'for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Add named hierarchy disabling to cgroup_no_v1 boot param
  cgroup: fix parsing empty mount option string
  cpuset: Remove set but not used variable 'cs'
  cgroup: fix CSS_TASK_ITER_PROCS
  cgroup: Add .__DEBUG__. prefix to debug file names
  cpuset: Minor cgroup2 interface updates
  cpuset: Expose cpuset.cpus.subpartitions with cgroup_debug
  cpuset: Add documentation about the new "cpuset.sched.partition" flag
  cpuset: Use descriptive text when reading/writing cpuset.sched.partition
  cpuset: Expose cpus.effective and mems.effective on cgroup v2 root
  cpuset: Make generate_sched_domains() work with partition
  cpuset: Make CPU hotplug work with partition
  cpuset: Track cpusets that use parent's effective_cpus
  cpuset: Add an error state to cpuset.sched.partition
  cpuset: Add new v2 cpuset.sched.partition flag
  cpuset: Simply allocation and freeing of cpumasks
  cpuset: Define data structures to support scheduling partition
  cpuset: Enable cpuset controller in default hierarchy
  cgroup: remove unnecessary unlikely()
2018-12-29 10:57:20 -08:00
Linus Torvalds f346b0becb Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - large KASAN update to use arm's "software tag-based mode"

 - a few misc things

 - sh updates

 - ocfs2 updates

 - just about all of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
  kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
  memcg, oom: notify on oom killer invocation from the charge path
  mm, swap: fix swapoff with KSM pages
  include/linux/gfp.h: fix typo
  mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
  hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
  hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
  memory_hotplug: add missing newlines to debugging output
  mm: remove __hugepage_set_anon_rmap()
  include/linux/vmstat.h: remove unused page state adjustment macro
  mm/page_alloc.c: allow error injection
  mm: migrate: drop unused argument of migrate_page_move_mapping()
  blkdev: avoid migration stalls for blkdev pages
  mm: migrate: provide buffer_migrate_page_norefs()
  mm: migrate: move migrate_page_lock_buffers()
  mm: migrate: lock buffers before migrate_page_move_mapping()
  mm: migration: factor out code to compute expected number of page references
  mm, page_alloc: enable pcpu_drain with zone capability
  kmemleak: add config to select auto scan
  mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
  ...
2018-12-28 16:55:46 -08:00
Linus Torvalds 0e9da3fbf7 for-4.21/block-20181221
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlwb7R8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjiID/97oDjMhNT7rwpuMbHw855h62j1hEN/m+N3
 FI0uxivYoYZLD+eJRnMcBwHlKjrCX8iJQAcv9ffI3ThtFW7dnZT3atUacaZVR/Dt
 IrxdymdBP3qsmuaId5NYBug7rJ+AiqFJKjEvCcSPu5X397J4I3SEbzhfvYLJ/aZX
 16o0HJlVVIrcbmq1IP4HwiIIOaKXvPaw04L4z4fpeynRSWG7EAi8NLSnhlR4Rxbb
 BTiMkCTsjRCFdyO6da4fvNQKWmPGPa3bJkYy3qR99cvJCeIbQjRyCloQlWNJRRgi
 3eJpCHVxqFmN0/+DNTJVQEEr4H8o0AVucrLVct1Jc4pessenkpoUniP8vELqwlng
 Z2VHLkhTfCEmvFlk82grrYdNvGATRsrbswt/PlP4T7rBfr1IpDk8kXDWF59EL2dy
 ly35Sk3wJGHBl8qa+vEPXOAnaWdqJXuVGpwB4ifOIatOls8mOxwfZjiRc7x05/fC
 1O4rR2IfLwRqwoYHs0AJ+h6ohOSn1mkGezl2Tch1VSFcJUOHmuYvraTaUi6hblpA
 SslaAoEhO39hRBL0HsvsMeqVWM9uzqvFkLDCfNPdiA81H1258CIbo4vF8z6czCIS
 eeXnTJxVhPVbZgb3a1a93SPwM6KIDZFoIijyd+NqjpU94thlnhYD0QEcKJIKH7os
 2p4aHs6ktw==
 =TRdW
 -----END PGP SIGNATURE-----

Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "This is the main pull request for block/storage for 4.21.

  Larger than usual, it was a busy round with lots of goodies queued up.
  Most notable is the removal of the old IO stack, which has been a long
  time coming. No new features for a while, everything coming in this
  week has all been fixes for things that were previously merged.

  This contains:

   - Use atomic counters instead of semaphores for mtip32xx (Arnd)

   - Cleanup of the mtip32xx request setup (Christoph)

   - Fix for circular locking dependency in loop (Jan, Tetsuo)

   - bcache (Coly, Guoju, Shenghui)
      * Optimizations for writeback caching
      * Various fixes and improvements

   - nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith)
      * host and target support for NVMe over TCP
      * Error log page support
      * Support for separate read/write/poll queues
      * Much improved polling
      * discard OOM fallback
      * Tracepoint improvements

   - lightnvm (Hans, Hua, Igor, Matias, Javier)
      * Igor added packed metadata to pblk. Now drives without metadata
        per LBA can be used as well.
      * Fix from Geert on uninitialized value on chunk metadata reads.
      * Fixes from Hans and Javier to pblk recovery and write path.
      * Fix from Hua Su to fix a race condition in the pblk recovery
        code.
      * Scan optimization added to pblk recovery from Zhoujie.
      * Small geometry cleanup from me.

   - Conversion of the last few drivers that used the legacy path to
     blk-mq (me)

   - Removal of legacy IO path in SCSI (me, Christoph)

   - Removal of legacy IO stack and schedulers (me)

   - Support for much better polling, now without interrupts at all.
     blk-mq adds support for multiple queue maps, which enables us to
     have a map per type. This in turn enables nvme to have separate
     completion queues for polling, which can then be interrupt-less.
     Also means we're ready for async polled IO, which is hopefully
     coming in the next release.

   - Killing of (now) unused block exports (Christoph)

   - Unification of the blk-rq-qos and blk-wbt wait handling (Josef)

   - Support for zoned testing with null_blk (Masato)

   - sx8 conversion to per-host tag sets (Christoph)

   - IO priority improvements (Damien)

   - mq-deadline zoned fix (Damien)

   - Ref count blkcg series (Dennis)

   - Lots of blk-mq improvements and speedups (me)

   - sbitmap scalability improvements (me)

   - Make core inflight IO accounting per-cpu (Mikulas)

   - Export timeout setting in sysfs (Weiping)

   - Cleanup the direct issue path (Jianchao)

   - Export blk-wbt internals in block debugfs for easier debugging
     (Ming)

   - Lots of other fixes and improvements"

* tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits)
  kyber: use sbitmap add_wait_queue/list_del wait helpers
  sbitmap: add helpers for add/del wait queue handling
  block: save irq state in blkg_lookup_create()
  dm: don't reuse bio for flushes
  nvme-pci: trace SQ status on completions
  nvme-rdma: implement polling queue map
  nvme-fabrics: allow user to pass in nr_poll_queues
  nvme-fabrics: allow nvmf_connect_io_queue to poll
  nvme-core: optionally poll sync commands
  block: make request_to_qc_t public
  nvme-tcp: fix spelling mistake "attepmpt" -> "attempt"
  nvme-tcp: fix endianess annotations
  nvmet-tcp: fix endianess annotations
  nvme-pci: refactor nvme_poll_irqdisable to make sparse happy
  nvme-pci: only set nr_maps to 2 if poll queues are supported
  nvmet: use a macro for default error location
  nvmet: fix comparison of a u16 with -1
  blk-mq: enable IO poll if .nr_queues of type poll > 0
  blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()
  blk-mq: skip zero-queue maps in blk_mq_map_swqueue
  ...
2018-12-28 13:19:59 -08:00
yuzhoujian ef8444ea01 mm, oom: reorganize the oom report in dump_header
OOM report contains several sections.  The first one is the allocation
context that has triggered the OOM.  Then we have cpuset context followed
by the stack trace of the OOM path.  The tird one is the OOM memory
information.  Followed by the current memory state of all system tasks.
At last, we will show oom eligible tasks and the information about the
chosen oom victim.

One thing that makes parsing more awkward than necessary is that we do not
have a single and easily parsable line about the oom context.  This patch
is reorganizing the oom report to

1) who invoked oom and what was the allocation request

[  515.902945] tuned invoked oom-killer: gfp_mask=0x6200ca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0

2) OOM stack trace

[  515.904273] CPU: 24 PID: 1809 Comm: tuned Not tainted 4.20.0-rc3+ #3
[  515.905518] Hardware name: Inspur SA5212M4/YZMB-00370-107, BIOS 4.1.10 11/14/2016
[  515.906821] Call Trace:
[  515.908062]  dump_stack+0x5a/0x73
[  515.909311]  dump_header+0x55/0x28c
[  515.914260]  oom_kill_process+0x2d8/0x300
[  515.916708]  out_of_memory+0x145/0x4a0
[  515.917932]  __alloc_pages_slowpath+0x7d2/0xa16
[  515.919157]  __alloc_pages_nodemask+0x277/0x290
[  515.920367]  filemap_fault+0x3d0/0x6c0
[  515.921529]  ? filemap_map_pages+0x2b8/0x420
[  515.922709]  ext4_filemap_fault+0x2c/0x40 [ext4]
[  515.923884]  __do_fault+0x20/0x80
[  515.925032]  __handle_mm_fault+0xbc0/0xe80
[  515.926195]  handle_mm_fault+0xfa/0x210
[  515.927357]  __do_page_fault+0x233/0x4c0
[  515.928506]  do_page_fault+0x32/0x140
[  515.929646]  ? page_fault+0x8/0x30
[  515.930770]  page_fault+0x1e/0x30

3) OOM memory information

[  515.958093] Mem-Info:
[  515.959647] active_anon:26501758 inactive_anon:1179809 isolated_anon:0
 active_file:4402672 inactive_file:483963 isolated_file:1344
 unevictable:0 dirty:4886753 writeback:0 unstable:0
 slab_reclaimable:148442 slab_unreclaimable:18741
 mapped:1347 shmem:1347 pagetables:58669 bounce:0
 free:88663 free_pcp:0 free_cma:0
...

4) current memory state of all system tasks

[  516.079544] [    744]     0   744     9211     1345   114688       82             0 systemd-journal
[  516.082034] [    787]     0   787    31764        0   143360       92             0 lvmetad
[  516.084465] [    792]     0   792    10930        1   110592      208         -1000 systemd-udevd
[  516.086865] [   1199]     0  1199    13866        0   131072      112         -1000 auditd
[  516.089190] [   1222]     0  1222    31990        1   110592      157             0 smartd
[  516.091477] [   1225]     0  1225     4864       85    81920       43             0 irqbalance
[  516.093712] [   1226]     0  1226    52612        0   258048      426             0 abrtd
[  516.112128] [   1280]     0  1280   109774       55   299008      400             0 NetworkManager
[  516.113998] [   1295]     0  1295    28817       37    69632       24             0 ksmtuned
[  516.144596] [  10718]     0 10718  2622484  1721372 15998976   267219             0 panic
[  516.145792] [  10719]     0 10719  2622484  1164767  9818112    53576             0 panic
[  516.146977] [  10720]     0 10720  2622484  1174361  9904128    53709             0 panic
[  516.148163] [  10721]     0 10721  2622484  1209070 10194944    54824             0 panic
[  516.149329] [  10722]     0 10722  2622484  1745799 14774272    91138             0 panic

5) oom context (contrains and the chosen victim).

oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0-1,task=panic,pid=10737,uid=0

An admin can easily get the full oom context at a single line which
makes parsing much easier.

Link: http://lkml.kernel.org/r/1542799799-36184-1-git-send-email-ufo19890607@gmail.com
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <yang.s@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:48 -08:00
Tejun Heo 3fc9c12d27 cgroup: Add named hierarchy disabling to cgroup_no_v1 boot param
It can be useful to inhibit all cgroup1 hierarchies especially during
transition and for debugging.  cgroup_no_v1 can block hierarchies with
controllers which leaves out the named hierarchies.  Expand it to
cover the named hierarchies so that "cgroup_no_v1=all,named" disables
all cgroup1 hierarchies.

Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Marcin Pawlowski <mpawlowski@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-12-28 10:34:12 -08:00
Ondrej Mosnacek e250d91d65 cgroup: fix parsing empty mount option string
This fixes the case where all mount options specified are consumed by an
LSM and all that's left is an empty string. In this case cgroupfs should
accept the string and not fail.

How to reproduce (with SELinux enabled):

    # umount /sys/fs/cgroup/unified
    # mount -o context=system_u:object_r:cgroup_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified
    mount: /sys/fs/cgroup/unified: wrong fs type, bad option, bad superblock on cgroup2, missing codepage or helper program, or other error.
    # dmesg | tail -n 1
    [   31.575952] cgroup: cgroup2: unknown option ""

Fixes: 67e9c74b8a ("cgroup: replace __DEVEL__sane_behavior with cgroup2 fs type")
[NOTE: should apply on top of commit 5136f6365c ("cgroup: implement "nsdelegate" mount option"), older versions need manual rebase]
Suggested-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-12-28 10:32:57 -08:00
Tejun Heo 4d71c6f877 Merge branch 'for-4.20-fixes' into for-4.21 2018-12-27 18:05:30 -08:00
Dennis Zhou fc5a828bfa blkcg: remove additional reference to the css
The previous patch in this series removed carrying around a pointer to
the css in blkg. However, the blkg association logic still relied on
taking a reference on the css to ensure we wouldn't fail in getting a
reference for the blkg.

Here the implicit dependency on the css is removed. The association
continues to rely on the tryget logic walking up the blkg tree. This
streamlines the three ways that association can happen: normal, swap,
and writeback.

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07 22:26:37 -07:00
YueHaibing 1e7eacaf1d cpuset: Remove set but not used variable 'cs'
Fixes gcc '-Wunused-but-set-variable' warning:

kernel/cgroup/cpuset.c: In function 'cpuset_cancel_attach':
kernel/cgroup/cpuset.c:2167:17: warning:
 variable 'cs' set but not used [-Wunused-but-set-variable]

It never used since introduction in commit 1f7dd3e5a6 ("cgroup: fix handling
of multi-destination migration from subtree_control enabling")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-12-03 08:23:22 -08:00
Paul E. McKenney 2af3024cd7 cgroups: Replace synchronize_sched() with synchronize_rcu()
Now that synchronize_rcu() waits for preempt-disable regions of code
as well as RCU read-side critical sections, synchronize_sched() can be
replaced by synchronize_rcu().  This commit therefore makes this change,
even though it is but a comment.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Dennis Zhou (Facebook)" <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
2018-12-01 12:38:49 -08:00
Tejun Heo e9d81a1bc2 cgroup: fix CSS_TASK_ITER_PROCS
CSS_TASK_ITER_PROCS implements process-only iteration by making
css_task_iter_advance() skip tasks which aren't threadgroup leaders;
however, when an iteration is started css_task_iter_start() calls the
inner helper function css_task_iter_advance_css_set() instead of
css_task_iter_advance().  As the helper doesn't have the skip logic,
when the first task to visit is a non-leader thread, it doesn't get
skipped correctly as shown in the following example.

  # ps -L 2030
    PID   LWP TTY      STAT   TIME COMMAND
   2030  2030 pts/0    Sl+    0:00 ./test-thread
   2030  2031 pts/0    Sl+    0:00 ./test-thread
  # mkdir -p /sys/fs/cgroup/x/a/b
  # echo threaded > /sys/fs/cgroup/x/a/cgroup.type
  # echo threaded > /sys/fs/cgroup/x/a/b/cgroup.type
  # echo 2030 > /sys/fs/cgroup/x/a/cgroup.procs
  # cat /sys/fs/cgroup/x/a/cgroup.threads
  2030
  2031
  # cat /sys/fs/cgroup/x/cgroup.procs
  2030
  # echo 2030 > /sys/fs/cgroup/x/a/b/cgroup.threads
  # cat /sys/fs/cgroup/x/cgroup.procs
  2031
  2030

The last read of cgroup.procs is incorrectly showing non-leader 2031
in cgroup.procs output.

This can be fixed by updating css_task_iter_advance() to handle the
first advance and css_task_iters_tart() to call
css_task_iter_advance() instead of the inner helper.  After the fix,
the same commands result in the following (correct) result:

  # ps -L 2062
    PID   LWP TTY      STAT   TIME COMMAND
   2062  2062 pts/0    Sl+    0:00 ./test-thread
   2062  2063 pts/0    Sl+    0:00 ./test-thread
  # mkdir -p /sys/fs/cgroup/x/a/b
  # echo threaded > /sys/fs/cgroup/x/a/cgroup.type
  # echo threaded > /sys/fs/cgroup/x/a/b/cgroup.type
  # echo 2062 > /sys/fs/cgroup/x/a/cgroup.procs
  # cat /sys/fs/cgroup/x/a/cgroup.threads
  2062
  2063
  # cat /sys/fs/cgroup/x/cgroup.procs
  2062
  # echo 2062 > /sys/fs/cgroup/x/a/b/cgroup.threads
  # cat /sys/fs/cgroup/x/cgroup.procs
  2062

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Fixes: 8cfd8147df ("cgroup: implement cgroup v2 thread support")
Cc: stable@vger.kernel.org # v4.14+
2018-11-20 08:12:20 -08:00
Tejun Heo c1bbd933e5 cgroup: Add .__DEBUG__. prefix to debug file names
Clearly mark the debug files and hide them by default by prefixing
".__DEBUG__.".

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Waiman Long <longman@redhat.com>
2018-11-13 12:16:01 -08:00
Tejun Heo b1e3aeb11c cpuset: Minor cgroup2 interface updates
* Rename the partition file from "cpuset.sched.partition" to
  "cpuset.cpus.partition".

* When writing to the partition file, drop "0" and "1" and only accept
  "member" and "root".

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Waiman Long <longman@redhat.com>
2018-11-13 12:09:48 -08:00
Waiman Long 5cf8114d6e cpuset: Expose cpuset.cpus.subpartitions with cgroup_debug
For debugging purpose, it will be useful to expose the content of the
subparts_cpus as a read-only file to see if the code work correctly.
However, subparts_cpus will not be used at all in most use cases. So
adding a new cpuset file that clutters the cgroup directory may not be
desirable.  This is now being done by using the hidden "cgroup_debug"
kernel command line option to expose a new "cpuset.cpus.subpartitions"
file.

That option was originally used by the debug controller to expose
itself when configured into the kernel. This is now extended to set an
internal flag used by cgroup_addrm_files(). A new CFTYPE_DEBUG flag
can now be used to specify that a cgroup file should only be created
when the "cgroup_debug" option is specified.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-11-08 12:27:32 -08:00
Waiman Long bb5b553c33 cpuset: Use descriptive text when reading/writing cpuset.sched.partition
Currently, cpuset.sched.partition returns the values, 0, 1 or -1 on
read. A person who is not familiar with the partition code may not
understand what they mean.

In order to make cpuset.sched.partition more user-friendly, it will
now display the following descriptive text on read:

  "root" - A partition root (top cpuset of a partition)
  "member" - A non-root member of a partition
  "root invalid" - An invalid partition root

Note that there is at least one partition in the whole cgroup hierarchy.
The top cpuset is the root of that partition.  The rests are either a
root if it starts a new partition or a member of a partition.

The cpuset.sched.partition file will now also accept "root" and
"member" besides 1 and 0 as valid input values. The "root invalid"
value is internal only and cannot be written to the file.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-11-08 12:27:31 -08:00
Waiman Long 5776ceccd4 cpuset: Expose cpus.effective and mems.effective on cgroup v2 root
Because of the fact that setting the "cpuset.sched.partition" in
a direct child of root can remove CPUs from the root's effective CPU
list, it makes sense to know what CPUs are left in the root cgroup for
scheduling purpose. So the "cpuset.cpus.effective" control file is now
exposed in the v2 cgroup root.

For consistency, the "cpuset.mems.effective" control file is exposed
as well.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-11-08 12:27:31 -08:00
Waiman Long 0ccea8feb9 cpuset: Make generate_sched_domains() work with partition
The generate_sched_domains() function is modified to make it work
correctly with the newly introduced subparts_cpus mask for scheduling
domains generation.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-11-08 12:27:30 -08:00
Waiman Long 4b842da276 cpuset: Make CPU hotplug work with partition
When there is a cpu hotplug event (CPU online or offline), the partitions
may need to be reconfigured and regenerated. So code is added to the
hotplug functions to make them work with new subparts_cpus mask to
compute the right effective_cpus for each of the affected cpusets.
It may also change the state of a partition root from real one to an
erroneous one or vice versa.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-11-08 12:27:30 -08:00
Waiman Long 4716909cc5 cpuset: Track cpusets that use parent's effective_cpus
In the default hierarchy, a cpuset will use the parent's effective_cpus
if none of the requested CPUs can be granted from the parent. That can
be a problem if a parent is a partition root with children partition
roots. Changes to a parent's effective_cpus list due to changes in a
child partition root may not be properly reflected in a child cpuset
that use parent's effective_cpus because the cpu_exclusive rule of a
partition root will not guard against that.

In order to avoid the mismatch, two new tracking variables are added to
the cpuset structure to track if a cpuset uses parent's effective_cpus
and the number of children cpusets that use its effective_cpus. So
whenever cpumask changes are made to a parent, it will also check to
see if it has other children cpusets that use its effective_cpus and
call update_cpumasks_hier() if that is the case.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-11-08 12:27:29 -08:00
Waiman Long 3881b86128 cpuset: Add an error state to cpuset.sched.partition
When external events like CPU offlining or user events like changing
the cpu list of an ancestor cpuset happen, update_cpumasks_hier()
will be called to update the effective cpus of each of the affected
cpusets. That will then call update_parent_subparts_cpumask() if
partitions are impacted.

Currently, these events may cause update_parent_subparts_cpumask()
to return error if none of the requested cpus are available or it will
consume all the cpus in the parent partition root. Handling these errors
is problematic as the states may become inconsistent.

Instead of letting update_parent_subparts_cpumask() return error, a new
error state (-1) is added to the partition_root_state flag to designate
the fact that the partition is no longer valid. IOW, it is no longer a
real partition root, but the CS_CPU_EXCLUSIVE flag will still be set
as it can be changed back to a real one if favorable change happens
later on.

This new error state is set internally and user cannot write this new
value to "cpuset.sched.partition".

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-11-08 12:27:29 -08:00
Waiman Long ee8dde0cd2 cpuset: Add new v2 cpuset.sched.partition flag
A new cpuset.sched.partition boolean flag is added to cpuset v2.
This new flag, if set, indicates that the cgroup is the root of a
new scheduling domain or partition that includes itself and all its
descendants except those that are scheduling domain roots themselves
and their descendants.

With this new flag, one can directly create as many partitions as
necessary without ever using the v1 trick of turning off load balancing
in specific cpusets to create partitions as a side effect.

This new flag is owned by the parent and will cause the CPUs in the
cpuset to be removed from the effective CPUs of its parent.

This is implemented internally by adding a new subparts_cpus mask that
holds the CPUs belonging to child partitions so that:

        subparts_cpus | effective_cpus = cpus_allowed
        subparts_cpus & effective_cpus = 0

This new flag can only be turned on in a cpuset if its parent is a
partition root itself. The state of this flag cannot be changed if the
cpuset has children.

Once turned on, further changes to "cpuset.cpus" is allowed as long
as there is at least one CPU left that can be granted from the parent
and a child partition root cannot use up all the CPUs in the parent's
effective_cpus.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-11-08 12:27:28 -08:00
Waiman Long bf92370c03 cpuset: Simply allocation and freeing of cpumasks
The previous commit introduces a new subparts_cpus mask into the cpuset
data structure and a new tmpmasks structure.  Managing the allocation
and freeing of those cpumasks is becoming more complex.

So a number of helper functions are added to simplify and streamline
the management of those cpumasks. To make it simple, all the cpumasks
are now pre-cleared on allocation.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-11-08 12:27:28 -08:00
Waiman Long 58b7484250 cpuset: Define data structures to support scheduling partition
>From a cpuset point of view, a scheduling partition is a group of
cpusets with their own set of exclusive CPUs that are not shared by
other tasks outside the scheduling partition.

In the legacy hierarchy, scheduling partitions are supported indirectly
via the right use of the load balancing and the exclusive CPUs flag
which is not intuitive and can be hard to use.

To fully support the concept of scheduling partitions in the default
hierarchy, we need to add some new field into the cpuset structure as
well as a new tmpmasks structure that is used to pre-allocate cpumasks
at the top level cpuset functions to avoid memory allocation in inner
functions as memory allocation failure in those inner functions may
cause a cpuset to have inconsistent states.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-11-08 12:27:27 -08:00
Waiman Long 4ec22e9c5a cpuset: Enable cpuset controller in default hierarchy
Given the fact that thread mode had been merged into 4.14, it is now
time to enable cpuset to be used in the default hierarchy (cgroup v2)
as it is clearly threaded.

The cpuset controller had experienced feature creep since its
introduction more than a decade ago. Besides the core cpus and mems
control files to limit cpus and memory nodes, there are a bunch of
additional features that can be controlled from the userspace. Some of
the features are of doubtful usefulness and may not be actively used.

This patch enables cpuset controller in the default hierarchy with
a minimal set of features, namely just the cpus and mems and their
effective_* counterparts.  We can certainly add more features to the
default hierarchy in the future if there is a real user need for them
later on.

Alternatively, with the unified hiearachy, it may make more sense
to move some of those additional cpuset features, if desired, to
memory controller or may be to the cpu controller instead of staying
with cpuset.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-11-08 12:27:27 -08:00
Yangtao Li 4d9ebbe2b0 cgroup: remove unnecessary unlikely()
WARN_ON() already contains an unlikely(), so it's not necessary to use
unlikely.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-11-05 08:28:11 -08:00
Linus Torvalds 5f21585384 for-linus-20181102
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlvchGgQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpj/1D/4kEQx4ncnFoZk8QshHV1L++rH3BbcLjQDd
 Wbh9ZSIQdI/gHTzS6bE7x3YfcbpMWPMO3+jFawdfRiFTEjlF8vQ+mnJ+Btb3z4D6
 mGEeFGVhHExlp2a0x/Ma8YWVNlMB7BE8Tq73bZEVMY+9lbpmDW/vp7Sfa87LBDKQ
 ZmY+My+VdHN7qLtQ7t3W/HtpbU+kcXMMd3ICjK4i+ofXy6mynk4+oQ2jwyXc5L86
 UCJCsTsSRr3CgbnkW/uprHo0XHk8i7O/4C3oR+x4pAIxCCa9g+vmw0EO9fvi/2iQ
 qe8jKdm7Y09xu/TiPBa7iz45tdh0cNMJKo3OezmSF9Np+r69KL5C/U4GRPKN3Iwm
 keoqn14ScABkYMSe4ys1AdEgKD6bNUaW3r/lJxTH2oUR23mjnCLp7c4WD/G+MlbB
 CzoakQyCHTZmDFLr2Kc8bkjmpil2T2UFfmLIDAu30LWIYeSGpiIO/V+g1foJMF2f
 06ERltNvgX1BJjoh4NSWySLEf1ZtkUU60NeATRol6gwhnIyLrHsgfm6OEhqlW/7x
 Xc1BWyzX7K6c3Dskk/u5aSRyXOyRC9KkMt3/2XexeDNHkte9yMH0IgSvopPBuER8
 +iPvPjNp7ychTKZB3zpSnlqGgePTjbufIEBtO3OyUmDZKjUqxahtxkQfmPhoclu+
 XdR4ArcqNg==
 =0zM4
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-block

Pull block layer fixes from Jens Axboe:
 "The biggest part of this pull request is the revert of the blkcg
  cleanup series. It had one fix earlier for a stacked device issue, but
  another one was reported. Rather than play whack-a-mole with this,
  revert the entire series and try again for the next kernel release.

  Apart from that, only small fixes/changes.

  Summary:

   - Indentation fixup for mtip32xx (Colin Ian King)

   - The blkcg cleanup series revert (Dennis Zhou)

   - Two NVMe fixes. One fixing a regression in the nvme request
     initialization in this merge window, causing nvme-fc to not work.
     The other is a suspend/resume p2p resource issue (James, Keith)

   - Fix sg discard merge, allowing us to merge in cases where we didn't
     before (Jianchao Wang)

   - Call rq_qos_exit() after the queue is frozen, preventing a hang
     (Ming)

   - Fix brd queue setup, fixing an oops if we fail setting up all
     devices (Ming)"

* tag 'for-linus-20181102' of git://git.kernel.dk/linux-block:
  nvme-pci: fix conflicting p2p resource adds
  nvme-fc: fix request private initialization
  blkcg: revert blkcg cleanups series
  block: brd: associate with queue until adding disk
  block: call rq_qos_exit() after queue is frozen
  mtip32xx: clean an indentation issue, remove extraneous tabs
  block: fix the DISCARD request merge
2018-11-02 11:25:48 -07:00
Dennis Zhou b5f2954d30 blkcg: revert blkcg cleanups series
This reverts a series committed earlier due to null pointer exception
bug report in [1]. It seems there are edge case interactions that I did
not consider and will need some time to understand what causes the
adverse interactions.

The original series can be found in [2] with a follow up series in [3].

[1] https://www.spinics.net/lists/cgroups/msg20719.html
[2] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/
[3] https://lore.kernel.org/lkml/20181020185612.51587-1-dennis@kernel.org/

This reverts the following commits:
d459d853c2, b2c3fa5467, 101246ec02, b3b9f24f5f, e2b0989954,
f0fcb3ec89, c839e7a03f, bdc2491708, 74b7c02a9b, 5bf9a1f3b4,
a7b39b4e96, 07b05bcc32, 49f4c2dc2b, 27e6fa996c

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-01 19:59:53 -06:00
Johannes Weiner 2ce7135adc psi: cgroup support
On a system that executes multiple cgrouped jobs and independent
workloads, we don't just care about the health of the overall system, but
also that of individual jobs, so that we can ensure individual job health,
fairness between jobs, or prioritize some jobs over others.

This patch implements pressure stall tracking for cgroups.  In kernels
with CONFIG_PSI=y, cgroup2 groups will have cpu.pressure, memory.pressure,
and io.pressure files that track aggregate pressure stall times for only
the tasks inside the cgroup.

Link: http://lkml.kernel.org/r/20180828172258.3185-10-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:32 -07:00
Linus Torvalds 6ab9e09238 for-4.20/block-20181021
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlvNQKgQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgps+8D/9Iy6YIeoPwN10gYsqIh0P2fS3wKzL3kiww
 3vFsWO78PzgLxUlNmB7teLtNFc/R5mi8becZmAdvs9za5YFZk56o3Ifv1x+e+z00
 VY1/gxhiJD6suLeJ6lECnERGDaiWOZVRMo2TE17vxYGW6GGaa0Ts6PUUXmpla1u5
 WKctgt0Qv9WVNyiIdLdeHqzKJwsSSwNTt8fK7eFhy3x8e0CwJr+GtXckbbW3LFkY
 lug0npsTli3EmEPMovZhd25SjZmTk5GTM+ADZQ7Tnv5KXoDWB9jn6TcCSAi3G+5d
 5WUVwfnDyYJiH8qvlg5tRJ690muIy3xMOmpr7QBQ0YnR/LQ3EW+1CVfqD+qimgLH
 TXzlREXQpBP3YlxSDS5nddz4o5z84GZmC9B/43ujPaZKIQ6eBXYdkmQH7tPtSugm
 C6VGomR5tHotjxIiAsexh/5hAus+wW8bObKGTPTyINT0ub3XNclwCKLh26CgI9ie
 WvbS9g3j/KPvu/7s6weZpgD+cks0YdWe/XdXXxiHwsGI9h3J2aJna5RQt1rKWDm5
 wGCgbc/B8eSwiWx+GXlqdB9/Dy/bGXOnSTDnKpEVl1f5zNjeLwUKXbjvkMefWs4m
 jEIcquuDETORY+ZYEfa5YbmS4Lhskr0kzMVTVkZ++81tAWpSCU9Xh3IHrR8TNpt+
 J0oh0FHBDg==
 =LRTT
 -----END PGP SIGNATURE-----

Merge tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block

Pull block layer updates from Jens Axboe:
 "This is the main pull request for block changes for 4.20. This
  contains:

   - Series enabling runtime PM for blk-mq (Bart).

   - Two pull requests from Christoph for NVMe, with items such as;
      - Better AEN tracking
      - Multipath improvements
      - RDMA fixes
      - Rework of FC for target removal
      - Fixes for issues identified by static checkers
      - Fabric cleanups, as prep for TCP transport
      - Various cleanups and bug fixes

   - Block merging cleanups (Christoph)

   - Conversion of drivers to generic DMA mapping API (Christoph)

   - Series fixing ref count issues with blkcg (Dennis)

   - Series improving BFQ heuristics (Paolo, et al)

   - Series improving heuristics for the Kyber IO scheduler (Omar)

   - Removal of dangerous bio_rewind_iter() API (Ming)

   - Apply single queue IPI redirection logic to blk-mq (Ming)

   - Set of fixes and improvements for bcache (Coly et al)

   - Series closing a hotplug race with sysfs group attributes (Hannes)

   - Set of patches for lightnvm:
      - pblk trace support (Hans)
      - SPDX license header update (Javier)
      - Tons of refactoring patches to cleanly abstract the 1.2 and 2.0
        specs behind a common core interface. (Javier, Matias)
      - Enable pblk to use a common interface to retrieve chunk metadata
        (Matias)
      - Bug fixes (Various)

   - Set of fixes and updates to the blk IO latency target (Josef)

   - blk-mq queue number updates fixes (Jianchao)

   - Convert a bunch of drivers from the old legacy IO interface to
     blk-mq. This will conclude with the removal of the legacy IO
     interface itself in 4.21, with the rest of the drivers (me, Omar)

   - Removal of the DAC960 driver. The SCSI tree will introduce two
     replacement drivers for this (Hannes)"

* tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block: (204 commits)
  block: setup bounce bio_sets properly
  blkcg: reassociate bios when make_request() is called recursively
  blkcg: fix edge case for blk_get_rl() under memory pressure
  nvme-fabrics: move controller options matching to fabrics
  nvme-rdma: always have a valid trsvcid
  mtip32xx: fully switch to the generic DMA API
  rsxx: switch to the generic DMA API
  umem: switch to the generic DMA API
  sx8: switch to the generic DMA API
  sx8: remove dead IF_64BIT_DMA_IS_POSSIBLE code
  skd: switch to the generic DMA API
  ubd: remove use of blk_rq_map_sg
  nvme-pci: remove duplicate check
  drivers/block: Remove DAC960 driver
  nvme-pci: fix hot removal during error handling
  nvmet-fcloop: suppress a compiler warning
  nvme-core: make implicit seed truncation explicit
  nvmet-fc: fix kernel-doc headers
  nvme-fc: rework the request initialization code
  nvme-fc: introduce struct nvme_fcp_op_w_sgl
  ...
2018-10-22 17:46:08 +01:00
Tejun Heo 479adb89a9 cgroup: Fix dom_cgrp propagation when enabling threaded mode
A cgroup which is already a threaded domain may be converted into a
threaded cgroup if the prerequisite conditions are met.  When this
happens, all threaded descendant should also have their ->dom_cgrp
updated to the new threaded domain cgroup.  Unfortunately, this
propagation was missing leading to the following failure.

  # cd /sys/fs/cgroup/unified
  # cat cgroup.subtree_control    # show that no controllers are enabled

  # mkdir -p mycgrp/a/b/c
  # echo threaded > mycgrp/a/b/cgroup.type

  At this point, the hierarchy looks as follows:

      mycgrp [d]
	  a [dt]
	      b [t]
		  c [inv]

  Now let's make node "a" threaded (and thus "mycgrp" s made "domain threaded"):

  # echo threaded > mycgrp/a/cgroup.type

  By this point, we now have a hierarchy that looks as follows:

      mycgrp [dt]
	  a [t]
	      b [t]
		  c [inv]

  But, when we try to convert the node "c" from "domain invalid" to
  "threaded", we get ENOTSUP on the write():

  # echo threaded > mycgrp/a/b/c/cgroup.type
  sh: echo: write error: Operation not supported

This patch fixes the problem by

* Moving the opencoded ->dom_cgrp save and restoration in
  cgroup_enable_threaded() into cgroup_{save|restore}_control() so
  that mulitple cgroups can be handled.

* Updating all threaded descendants' ->dom_cgrp to point to the new
  dom_cgrp when enabling threaded mode.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Reported-by: Amin Jamali <ajamali@pivotal.io>
Reported-by: Joao De Almeida Pereira <jpereira@pivotal.io>
Link: https://lore.kernel.org/r/CAKgNAkhHYCMn74TCNiMJ=ccLd7DcmXSbvw3CbZ1YREeG7iJM5g@mail.gmail.com
Fixes: 454000adaa ("cgroup: introduce cgroup->dom_cgrp and threaded css_set handling")
Cc: stable@vger.kernel.org # v4.14+
2018-10-04 13:28:08 -07:00
Dennis Zhou (Facebook) f0fcb3ec89 blkcg: remove additional reference to the css
The previous patch in this series removed carrying around a pointer to
the css in blkg. However, the blkg association logic still relied on
taking a reference on the css to ensure we wouldn't fail in getting a
reference for the blkg.

Here the implicit dependency on the css is removed. The association
continues to rely on the tryget logic walking up the blkg tree. This
streamlines the three ways that association can happen: normal, swap,
and writeback.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21 20:29:15 -06:00
Linus Torvalds 596766102a Merge branch 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "Just one commit from Steven to take out spin lock from trace event
  handlers"

* 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup/tracing: Move taking of spin lock out of trace event handlers
2018-08-24 13:19:27 -07:00
Dmitry Torokhov 488dee96bb kernfs: allow creating kernfs objects with arbitrary uid/gid
This change allows creating kernfs files and directories with arbitrary
uid/gid instead of always using GLOBAL_ROOT_UID/GID by extending
kernfs_create_dir_ns() and kernfs_create_file_ns() with uid/gid arguments.
The "simple" kernfs_create_file() and kernfs_create_dir() are left alone
and always create objects belonging to the global root.

When creating symlinks ownership (uid/gid) is taken from the target kernfs
object.

Co-Developed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20 23:44:35 -07:00
Steven Rostedt (VMware) e4f8d81c73 cgroup/tracing: Move taking of spin lock out of trace event handlers
It is unwise to take spin locks from the handlers of trace events.
Mainly, because they can introduce lockups, because it introduces locks
in places that are normally not tested. Worse yet, because trace events
are tucked away in the include/trace/events/ directory, locks that are
taken there are forgotten about.

As a general rule, I tell people never to take any locks in a trace
event handler.

Several cgroup trace event handlers call cgroup_path() which eventually
takes the kernfs_rename_lock spinlock. This injects the spinlock in the
code without people realizing it. It also can cause issues for the
PREEMPT_RT patch, as the spinlock becomes a mutex, and the trace event
handlers are called with preemption disabled.

By moving the calculation of the cgroup_path() out of the trace event
handlers and into a macro (surrounded by a
trace_cgroup_##type##_enabled()), then we could place the cgroup_path
into a string, and pass that to the trace event. Not only does this
remove the taking of the spinlock out of the trace event handler, but
it also means that the cgroup_path() only needs to be called once (it
is currently called twice, once to get the length to reserver the
buffer for, and once again to get the path itself. Now it only needs to
be done once.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-07-11 10:48:47 -07:00
Mauro Carvalho Chehab 5fb94e9ca3 docs: Fix some broken references
As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked if the produced result is valid, removing a few
false-positives.

Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15 18:10:01 -03:00
Kees Cook 42bc47b353 treewide: Use array_size() in vmalloc()
The vmalloc() function has no 2-factor argument form, so multiplication
factors need to be wrapped in array_size(). This patch replaces cases of:

        vmalloc(a * b)

with:
        vmalloc(array_size(a, b))

as well as handling cases of:

        vmalloc(a * b * c)

with:

        vmalloc(array3_size(a, b, c))

This does, however, attempt to ignore constant size factors like:

        vmalloc(4 * 1024)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  vmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  vmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  vmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
  vmalloc(
-	sizeof(TYPE) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT_ID
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT_ID
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

  vmalloc(
-	SIZE * COUNT
+	array_size(COUNT, SIZE)
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  vmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  vmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  vmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  vmalloc(C1 * C2 * C3, ...)
|
  vmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants.
@@
expression E1, E2;
constant C1, C2;
@@

(
  vmalloc(C1 * C2, ...)
|
  vmalloc(
-	E1 * E2
+	array_size(E1, E2)
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Kees Cook 6da2ec5605 treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Linus Torvalds 2857676045 - Introduce arithmetic overflow test helper functions (Rasmus)
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
 - Introduce overflow test module (Rasmus, Kees)
 - Introduce saturating size helper functions (Matthew, Kees)
 - Treewide use of struct_size() for allocators (Kees)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsYJ1gWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJlCTEACwdEeriAd2VwxknnsstojGD/3g
 8TTFA19vSu4Gxa6WiDkjGoSmIlfhXTlZo1Nlmencv16ytSvIVDNLUIB3uDxUIv1J
 2+dyHML9JpXYHHR7zLXXnGFJL0wazqjbsD3NYQgXqmun7EVVYnOsAlBZ7h/Lwiej
 jzEJd8DaHT3TA586uD3uggiFvQU0yVyvkDCDONIytmQx+BdtGdg9TYCzkBJaXuDZ
 YIthyKDvxIw5nh/UaG3L+SKo73tUr371uAWgAfqoaGQQCWe+mxnWL4HkCKsjFzZL
 u9ouxxF/n6pij3E8n6rb0i2fCzlsTDdDF+aqV1rQ4I4hVXCFPpHUZgjDPvBWbj7A
 m6AfRHVNnOgI8HGKqBGOfViV+2kCHlYeQh3pPW33dWzy/4d/uq9NIHKxE63LH+S4
 bY3oO2ela8oxRyvEgXLjqmRYGW1LB/ZU7FS6Rkx2gRzo4k8Rv+8K/KzUHfFVRX61
 jEbiPLzko0xL9D53kcEn0c+BhofK5jgeSWxItdmfuKjLTW4jWhLRlU+bcUXb6kSS
 S3G6aF+L+foSUwoq63AS8QxCuabuhreJSB+BmcGUyjthCbK/0WjXYC6W/IJiRfBa
 3ZTxBC/2vP3uq/AGRNh5YZoxHL8mSxDfn62F+2cqlJTTKR/O+KyDb1cusyvk3H04
 KCDVLYPxwQQqK1Mqig==
 =/3L8
 -----END PGP SIGNATURE-----

Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull overflow updates from Kees Cook:
 "This adds the new overflow checking helpers and adds them to the
  2-factor argument allocators. And this adds the saturating size
  helpers and does a treewide replacement for the struct_size() usage.
  Additionally this adds the overflow testing modules to make sure
  everything works.

  I'm still working on the treewide replacements for allocators with
  "simple" multiplied arguments:

     *alloc(a * b, ...) -> *alloc_array(a, b, ...)

  and

     *zalloc(a * b, ...) -> *calloc(a, b, ...)

  as well as the more complex cases, but that's separable from this
  portion of the series. I expect to have the rest sent before -rc1
  closes; there are a lot of messy cases to clean up.

  Summary:

   - Introduce arithmetic overflow test helper functions (Rasmus)

   - Use overflow helpers in 2-factor allocators (Kees, Rasmus)

   - Introduce overflow test module (Rasmus, Kees)

   - Introduce saturating size helper functions (Matthew, Kees)

   - Treewide use of struct_size() for allocators (Kees)"

* tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  treewide: Use struct_size() for devm_kmalloc() and friends
  treewide: Use struct_size() for vmalloc()-family
  treewide: Use struct_size() for kmalloc()-family
  device: Use overflow helpers for devm_kmalloc()
  mm: Use overflow helpers in kvmalloc()
  mm: Use overflow helpers in kmalloc_array*()
  test_overflow: Add memory allocation overflow tests
  overflow.h: Add allocation size calculation helpers
  test_overflow: Report test failures
  test_overflow: macrofy some more, do more tests for free
  lib: add runtime test of check_*_overflow functions
  compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06 17:27:14 -07:00
Kees Cook acafe7e302 treewide: Use struct_size() for kmalloc()-family
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    void *entry[];
};

instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);

This patch makes the changes for kmalloc()-family (and kvmalloc()-family)
uses. It was done via automatic conversion with manual review for the
"CHECKME" non-standard cases noted below, using the following Coccinelle
script:

// pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
//                      sizeof *pkey_cache->table, GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@

- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06 11:15:43 -07:00
Linus Torvalds 9f25a8da42 Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:

 - For cpustat, cgroup has a percpu hierarchical stat mechanism which
   propagates up the hierarchy lazily.

   This contains commits to factor out and generalize the mechanism so
   that it can be used for other cgroup stats too.

   The original intention was to update memcg stats to use it but memcg
   went for a different approach, so still the only user is cpustat. The
   factoring out and generalization still make sense and it's likely
   that this can be used for other purposes in the future.

 - cgroup uses kernfs_notify() (which uses fsnotify()) to inform user
   space of certain events. A rate limiting mechanism is added.

 - Other misc changes.

* 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: css_set_lock should nest inside tasklist_lock
  rdmacg: Convert to use match_string() helper
  cgroup: Make cgroup_rstat_updated() ready for root cgroup usage
  cgroup: Add memory barriers to plug cgroup_rstat_updated() race window
  cgroup: Add cgroup_subsys->css_rstat_flush()
  cgroup: Replace cgroup_rstat_mutex with a spinlock
  cgroup: Factor out and expose cgroup_rstat_*() interface functions
  cgroup: Reorganize kernel/cgroup/rstat.c
  cgroup: Distinguish base resource stat implementation from rstat
  cgroup: Rename stat to rstat
  cgroup: Rename kernel/cgroup/stat.c to kernel/cgroup/rstat.c
  cgroup: Limit event generation frequency
  cgroup: Explicitly remove core interface files
2018-06-05 17:08:45 -07:00
Tejun Heo d8742e2290 cgroup: css_set_lock should nest inside tasklist_lock
cgroup_enable_task_cg_lists() incorrectly nests non-irq-safe
tasklist_lock inside irq-safe css_set_lock triggering the following
lockdep warning.

  WARNING: possible irq lock inversion dependency detected
  4.17.0-rc1-00027-gb37d049 #6 Not tainted
  --------------------------------------------------------
  systemd/1 just changed the state of lock:
  00000000fe57773b (css_set_lock){..-.}, at: cgroup_free+0xf2/0x12a
  but this lock took another, SOFTIRQ-unsafe lock in the past:
   (tasklist_lock){.+.+}

  and interrupts could create inverse lock ordering between them.

  other info that might help us debug this:
   Possible interrupt unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(tasklist_lock);
				 local_irq_disable();
				 lock(css_set_lock);
				 lock(tasklist_lock);
    <Interrupt>
      lock(css_set_lock);

   *** DEADLOCK ***

The condition is highly unlikely to actually happen especially given
that the path is executed only once per boot.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Boqun Feng <boqun.feng@gmail.com>
2018-05-23 11:04:54 -07:00
Christoph Hellwig 3f3942aca6 proc: introduce proc_create_single{,_data}
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16 07:23:35 +02:00
Andy Shevchenko cc659e76f3 rdmacg: Convert to use match_string() helper
The new helper returns index of the matching string in an array.
We are going to use it here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-07 09:27:26 -07:00
Tejun Heo c43c5ea75f cgroup: Make cgroup_rstat_updated() ready for root cgroup usage
cgroup_rstat_updated() ensures that the cgroup's rstat is linked to
the parent.  If there's no parent, it never gets linked and the
function ends up grabbing and releasing the cgroup_rstat_lock each
time for no reason which can be expensive.

This hasn't been a problem till now because nobody was calling the
function for the root cgroup but rstat is gonna be exposed to
controllers and use cases, so let's get ready.  Make
cgroup_rstat_updated() an no-op for the root cgroup.

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26 14:29:06 -07:00
Tejun Heo 9a9e97b2f1 cgroup: Add memory barriers to plug cgroup_rstat_updated() race window
cgroup_rstat_updated() has a small race window where an updated
signaling can race with flush and could be lost till the next update.
This wasn't a problem for the existing usages, but we plan to use
rstat to track counters which need to be accurate.

This patch plugs the race window by synchronizing
cgroup_rstat_updated() and flush path with memory barriers around
cgroup_rstat_cpu->updated_next pointer.

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26 14:29:05 -07:00
Tejun Heo 8f53470bab cgroup: Add cgroup_subsys->css_rstat_flush()
This patch adds cgroup_subsys->css_rstat_flush().  If a subsystem has
this callback, its csses are linked on cgrp->css_rstat_list and rstat
will call the function whenever the associated cgroup is flushed.
Flush is also performed when such csses are released so that residual
counts aren't lost.

Combined with the rstat API previous patches factored out, this allows
controllers to plug into rstat to manage their statistics in a
scalable way.

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26 14:29:05 -07:00
Tejun Heo 0fa294fb19 cgroup: Replace cgroup_rstat_mutex with a spinlock
Currently, rstat flush path is protected with a mutex which is fine as
all the existing users are from interface file show path.  However,
rstat is being generalized for use by controllers and flushing from
atomic contexts will be necessary.

This patch replaces cgroup_rstat_mutex with a spinlock and adds a
irq-safe flush function - cgroup_rstat_flush_irqsafe().  Explicit
yield handling is added to the flush path so that other flush
functions can yield to other threads and flushers.

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26 14:29:05 -07:00
Tejun Heo 6162cef0f7 cgroup: Factor out and expose cgroup_rstat_*() interface functions
cgroup_rstat is being generalized so that controllers can use it too.
This patch factors out and exposes the following interface functions.

* cgroup_rstat_updated(): Renamed from cgroup_rstat_cpu_updated() for
  consistency.

* cgroup_rstat_flush_hold/release(): Factored out from base stat
  implementation.

* cgroup_rstat_flush(): Verbatim expose.

While at it, drop assert on cgroup_rstat_mutex in
cgroup_base_stat_flush() as it crosses layers and make a minor comment
update.

v2: Added EXPORT_SYMBOL_GPL(cgroup_rstat_updated) to fix a build bug.

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26 14:29:05 -07:00
Tejun Heo a17556f8d9 cgroup: Reorganize kernel/cgroup/rstat.c
Currently, rstat.c has rstat and base stat implementations intermixed.
Collect base stat implementation at the end of the file.  Also,
reorder the prototypes.

This patch doesn't make any functional changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26 14:29:05 -07:00
Tejun Heo d4ff749b5e cgroup: Distinguish base resource stat implementation from rstat
Base resource stat accounts universial (not specific to any
controller) resource consumptions on top of rstat.  Currently, its
implementation is intermixed with rstat implementation making the code
confusing to follow.

This patch clarifies the distintion by doing the followings.

* Encapsulate base resource stat counters, currently only cputime, in
  struct cgroup_base_stat.

* Move prev_cputime into struct cgroup and initialize it with cgroup.

* Rename the related functions so that they start with cgroup_base_stat.

* Prefix the related variables and field names with b.

This patch doesn't make any functional changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26 14:29:04 -07:00
Tejun Heo c58632b363 cgroup: Rename stat to rstat
stat is too generic a name and ends up causing subtle confusions.
It'll be made generic so that controllers can plug into it, which will
make the problem worse.  Let's rename it to something more specific -
cgroup_rstat for cgroup recursive stat.

This patch does the following renames.  No other changes.

* cpu_stat	-> rstat_cpu
* stat		-> rstat
* ?cstat	-> ?rstatc

Note that the renames are selective.  The unrenamed are the ones which
implement basic resource statistics on top of rstat.  This will be
further cleaned up in the following patches.

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26 14:29:04 -07:00
Tejun Heo a5c2b93f79 cgroup: Rename kernel/cgroup/stat.c to kernel/cgroup/rstat.c
stat is too generic a name and ends up causing subtle confusions.
It'll be made generic so that controllers can plug into it, which will
make the problem worse.  Let's rename it to something more specific -
cgroup_rstat for cgroup recursive stat.

First, rename kernel/cgroup/stat.c to kernel/cgroup/rstat.c.  No
content changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26 14:29:04 -07:00
Tejun Heo b12e358328 cgroup: Limit event generation frequency
".events" files generate file modified event to notify userland of
possible new events.  Some of the events can be quite bursty
(e.g. memory high event) and generating notification each time is
costly and pointless.

This patch implements a event rate limit mechanism.  If a new
notification is requested before 10ms has passed since the previous
notification, the new notification is delayed till then.

As this only delays from the second notification on in a given close
cluster of notifications, userland reactions to notifications
shouldn't be delayed at all in most cases while avoiding notification
storms.

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26 14:29:04 -07:00
Tejun Heo 5faaf05f29 cgroup: Explicitly remove core interface files
The "cgroup." core interface files bypass the usual interface removal
path and get removed recursively along with the cgroup itself.  While
this works now, the subtle discrepancy gets in the way of implementing
common mechanisms.

This patch updates cgroup core interface file handling so that it's
consistent with controller interface files.  When added, the css is
marked CSS_VISIBLE and they're explicitly removed before the cgroup is
destroyed.

This doesn't cause user-visible behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-04-26 14:29:04 -07:00
Linus Torvalds d92cd810e6 Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
 "rcu_work addition and a couple trivial changes"

* 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: remove the comment about the old manager_arb mutex
  workqueue: fix the comments of nr_idle
  fs/aio: Use rcu_work instead of explicit rcu and work item
  cgroup: Use rcu_work instead of explicit rcu and work item
  RCU, workqueue: Implement rcu_work
2018-04-03 18:00:13 -07:00
Tejun Heo 8f36aaec9c cgroup: Use rcu_work instead of explicit rcu and work item
Workqueue now has rcu_work.  Use it instead of open-coding rcu -> work
item bouncing.

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-03-19 10:12:03 -07:00
Tejun Heo d1897c9538 cgroup: fix rule checking for threaded mode switching
A domain cgroup isn't allowed to be turned threaded if its subtree is
populated or domain controllers are enabled.  cgroup_enable_threaded()
depended on cgroup_can_be_thread_root() test to enforce this rule.  A
parent which has populated domain descendants or have domain
controllers enabled can't become a thread root, so the above rules are
enforced automatically.

However, for the root cgroup which can host mixed domain and threaded
children, cgroup_can_be_thread_root() doesn't check any of those
conditions and thus first level cgroups ends up escaping those rules.

This patch fixes the bug by adding explicit checks for those rules in
cgroup_enable_threaded().

Reported-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 8cfd8147df ("cgroup: implement cgroup v2 thread support")
Cc: stable@vger.kernel.org # v4.14+
2018-02-21 11:39:22 -08:00
Yaowei Bai 77ef80c65a kernel/cpuset: current_cpuset_is_being_rebound can be boolean
Make current_cpuset_is_being_rebound return bool due to this particular
function only using either one or zero as its return value.

No functional change.

Link: http://lkml.kernel.org/r/1513266622-15860-4-git-send-email-baiyaowei@cmss.chinamobile.com
Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:47 -08:00
Tejun Heo 08a77676f9 string: drop __must_check from strscpy() and restore strscpy() usages in cgroup
e7fd37ba12 ("cgroup: avoid copying strings longer than the buffers")
converted possibly unsafe strncpy() usages in cgroup to strscpy().
However, although the callsites are completely fine with truncated
copied, because strscpy() is marked __must_check, it led to the
following warnings.

  kernel/cgroup/cgroup.c: In function ‘cgroup_file_name’:
  kernel/cgroup/cgroup.c:1400:10: warning: ignoring return value of ‘strscpy’, declared with attribute warn_unused_result [-Wunused-result]
     strscpy(buf, cft->name, CGROUP_FILE_NAME_MAX);
	       ^

To avoid the warnings, 50034ed496 ("cgroup: use strlcpy() instead of
strscpy() to avoid spurious warning") switched them to strlcpy().

strlcpy() is worse than strlcpy() because it unconditionally runs
strlen() on the source string, and the only reason we switched to
strlcpy() here was because it was lacking __must_check, which doesn't
reflect any material differences between the two function.  It's just
that someone added __must_check to strscpy() and not to strlcpy().

These basic string copy operations are used in variety of ways, and
one of not-so-uncommon use cases is safely handling truncated copies,
where the caller naturally doesn't care about the return value.  The
__must_check doesn't match the actual use cases and forces users to
opt for inferior variants which lack __must_check by happenstance or
spread ugly (void) casts.

Remove __must_check from strscpy() and restore strscpy() usages in
cgroup.

Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ma Shimiao <mashimiao.fnst@cn.fujitsu.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
2018-01-19 08:51:36 -08:00
Roman Gushchin 4f58424da3 cgroup: make cgroup.threads delegatable
Make cgroup.threads file delegatable.
The behavior of cgroup.threads should follow the behavior of cgroup.procs.

Signed-off-by: Roman Gushchin <guro@fb.com>
Discovered-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-01-10 09:42:32 -08:00
Tejun Heo 74d0833c65 cgroup: fix css_task_iter crash on CSS_TASK_ITER_PROC
While teaching css_task_iter to handle skipping over tasks which
aren't group leaders, bc2fb7ed08 ("cgroup: add @flags to
css_task_iter_start() and implement CSS_TASK_ITER_PROCS") introduced a
silly bug.

CSS_TASK_ITER_PROCS is implemented by repeating
css_task_iter_advance() while the advanced cursor is pointing to a
non-leader thread.  However, the cursor variable, @l, wasn't updated
when the iteration has to advance to the next css_set and the
following repetition would operate on the terminal @l from the
previous iteration which isn't pointing to a valid task leading to
oopses like the following or infinite looping.

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000254
  IP: __task_pid_nr_ns+0xc7/0xf0
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP
  ...
  CPU: 2 PID: 1 Comm: systemd Not tainted 4.14.4-200.fc26.x86_64 #1
  Hardware name: System manufacturer System Product Name/PRIME B350M-A, BIOS 3203 11/09/2017
  task: ffff88c4baee8000 task.stack: ffff96d5c3158000
  RIP: 0010:__task_pid_nr_ns+0xc7/0xf0
  RSP: 0018:ffff96d5c315bd50 EFLAGS: 00010206
  RAX: 0000000000000000 RBX: ffff88c4b68c6000 RCX: 0000000000000250
  RDX: ffffffffa5e47960 RSI: 0000000000000000 RDI: ffff88c490f6ab00
  RBP: ffff96d5c315bd50 R08: 0000000000001000 R09: 0000000000000005
  R10: ffff88c4be006b80 R11: ffff88c42f1b8004 R12: ffff96d5c315bf18
  R13: ffff88c42d7dd200 R14: ffff88c490f6a510 R15: ffff88c4b68c6000
  FS:  00007f9446f8ea00(0000) GS:ffff88c4be680000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000254 CR3: 00000007f956f000 CR4: 00000000003406e0
  Call Trace:
   cgroup_procs_show+0x19/0x30
   cgroup_seqfile_show+0x4c/0xb0
   kernfs_seq_show+0x21/0x30
   seq_read+0x2ec/0x3f0
   kernfs_fop_read+0x134/0x180
   __vfs_read+0x37/0x160
   ? security_file_permission+0x9b/0xc0
   vfs_read+0x8e/0x130
   SyS_read+0x55/0xc0
   entry_SYSCALL_64_fastpath+0x1a/0xa5
  RIP: 0033:0x7f94455f942d
  RSP: 002b:00007ffe81ba2d00 EFLAGS: 00000293 ORIG_RAX: 0000000000000000
  RAX: ffffffffffffffda RBX: 00005574e2233f00 RCX: 00007f94455f942d
  RDX: 0000000000001000 RSI: 00005574e2321a90 RDI: 000000000000002b
  RBP: 0000000000000000 R08: 00005574e2321a90 R09: 00005574e231de60
  R10: 00007f94458c8b38 R11: 0000000000000293 R12: 00007f94458c8ae0
  R13: 00007ffe81ba3800 R14: 0000000000000000 R15: 00005574e2116560
  Code: 04 74 0e 89 f6 48 8d 04 76 48 8d 04 c5 f0 05 00 00 48 8b bf b8 05 00 00 48 01 c7 31 c0 48 8b 0f 48 85 c9 74 18 8b b2 30 08 00 00 <3b> 71 04 77 0d 48 c1 e6 05 48 01 f1 48 3b 51 38 74 09 5d c3 8b
  RIP: __task_pid_nr_ns+0xc7/0xf0 RSP: ffff96d5c315bd50

Fix it by moving the initialization of the cursor below the repeat
label.  While at it, rename it to @next for readability.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: bc2fb7ed08 ("cgroup: add @flags to css_task_iter_start() and implement CSS_TASK_ITER_PROCS")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Laura Abbott <labbott@redhat.com>
Reported-by: Bronek Kozicki <brok@incorrekt.com>
Reported-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-12-20 07:09:19 -08:00
Prateek Sood 116d2f7496 cgroup: Fix deadlock in cpu hotplug path
Deadlock during cgroup migration from cpu hotplug path when a task T is
being moved from source to destination cgroup.

kworker/0:0
cpuset_hotplug_workfn()
   cpuset_hotplug_update_tasks()
      hotplug_update_tasks_legacy()
        remove_tasks_in_empty_cpuset()
          cgroup_transfer_tasks() // stuck in iterator loop
            cgroup_migrate()
              cgroup_migrate_add_task()

In cgroup_migrate_add_task() it checks for PF_EXITING flag of task T.
Task T will not migrate to destination cgroup. css_task_iter_start()
will keep pointing to task T in loop waiting for task T cg_list node
to be removed.

Task T
do_exit()
  exit_signals() // sets PF_EXITING
  exit_task_namespaces()
    switch_task_namespaces()
      free_nsproxy()
        put_mnt_ns()
          drop_collected_mounts()
            namespace_unlock()
              synchronize_rcu()
                _synchronize_rcu_expedited()
                  schedule_work() // on cpu0 low priority worker pool
                  wait_event() // waiting for work item to execute

Task T inserted a work item in the worklist of cpu0 low priority
worker pool. It is waiting for expedited grace period work item
to execute. This work item will only be executed once kworker/0:0
complete execution of cpuset_hotplug_workfn().

kworker/0:0 ==> Task T ==>kworker/0:0

In case of PF_EXITING task being migrated from source to destination
cgroup, migrate next available task in source cgroup.

Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-12-19 05:38:47 -08:00
Arnd Bergmann 50034ed496 cgroup: use strlcpy() instead of strscpy() to avoid spurious warning
As long as cft->name is guaranteed to be NUL-terminated, using strlcpy() would
work just as well and avoid that warning, so the change below could be folded
into that commit.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-12-15 05:09:47 -08:00
Ma Shimiao e7fd37ba12 cgroup: avoid copying strings longer than the buffers
cgroup root name and file name have max length limit, we should
avoid copying longer name than that to the name.

tj: minor update to $SUBJ.

Signed-off-by: Ma Shimiao <mashimiao.fnst@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-12-12 07:53:29 -08:00
Tejun Heo bdfbbda90a Revert "cgroup/cpuset: remove circular dependency deadlock"
This reverts commit aa24163b2e.

This and the following commit led to another circular locking scenario
and the scenario which is fixed by this commit no longer exists after
e8b3f8db7a ("workqueue/hotplug: simplify workqueue_offline_cpu()")
which removes work item flushing from hotplug path.

Revert it for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
2017-12-04 14:55:59 -08:00
Tejun Heo 11db855c3d Revert "cpuset: Make cpuset hotplug synchronous"
This reverts commit 1599a185f0.

This and the previous commit led to another circular locking scenario
and the scenario which is fixed by this commit no longer exists after
e8b3f8db7a ("workqueue/hotplug: simplify workqueue_offline_cpu()")
which removes work item flushing from hotplug path.

Revert it for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
2017-12-04 14:41:11 -08:00
Lucas Stach 52cf373c37 cgroup: properly init u64_stats
Lockdep complains that the stats update is trying to register a non-static
key. This is because u64_stats are using a seqlock on 32bit arches, which
needs to be initialized before usage.

Fixes: 041cd640b2 (cgroup: Implement cgroup2 basic CPU usage accounting)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-28 07:16:08 -08:00
Wang Long ddf7005f32 debug cgroup: use task_css_set instead of rcu_dereference
This macro `task_css_set` verifies that the caller is
inside proper critical section if the kernel set CONFIG_PROVE_RCU=y.

Signed-off-by: Wang Long <wanglong19@meituan.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-27 11:37:33 -08:00
Prateek Sood 1599a185f0 cpuset: Make cpuset hotplug synchronous
Convert cpuset_hotplug_workfn() into synchronous call for cpu hotplug
path. For memory hotplug path it still gets queued as a work item.

Since cpuset_hotplug_workfn() can be made synchronous for cpu hotplug
path, it is not required to wait for cpuset hotplug while thawing
processes.

Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-27 08:48:10 -08:00
Prateek Sood aa24163b2e cgroup/cpuset: remove circular dependency deadlock
Remove circular dependency deadlock in a scenario where hotplug of CPU is
being done while there is updation in cgroup and cpuset triggered from
userspace.

Process A => kthreadd => Process B => Process C => Process A

Process A
cpu_subsys_offline();
  cpu_down();
    _cpu_down();
      percpu_down_write(&cpu_hotplug_lock); //held
      cpuhp_invoke_callback();
	     workqueue_offline_cpu();
            queue_work_on(); // unbind_work on system_highpri_wq
               __queue_work();
                 insert_work();
                    wake_up_worker();
            flush_work();
               wait_for_completion();

worker_thread();
   manage_workers();
      create_worker();
	     kthread_create_on_node();
		    wake_up_process(kthreadd_task);

kthreadd
kthreadd();
  kernel_thread();
    do_fork();
      copy_process();
        percpu_down_read(&cgroup_threadgroup_rwsem);
          __rwsem_down_read_failed_common(); //waiting

Process B
kernfs_fop_write();
  cgroup_file_write();
    cgroup_procs_write();
      percpu_down_write(&cgroup_threadgroup_rwsem); //held
      cgroup_attach_task();
        cgroup_migrate();
          cgroup_migrate_execute();
            cpuset_can_attach();
              mutex_lock(&cpuset_mutex); //waiting

Process C
kernfs_fop_write();
  cgroup_file_write();
    cpuset_write_resmask();
      mutex_lock(&cpuset_mutex); //held
      update_cpumask();
        update_cpumasks_hier();
          rebuild_sched_domains_locked();
            get_online_cpus();
              percpu_down_read(&cpu_hotplug_lock); //waiting

Eliminating deadlock by reversing the locking order for cpuset_mutex and
cpu_hotplug_lock.

Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-27 08:48:10 -08:00
Linus Torvalds 22714a2ba4 Merge branch 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "Cgroup2 cpu controller support is finally merged.

   - Basic cpu statistics support to allow monitoring by default without
     the CPU controller enabled.

   - cgroup2 cpu controller support.

   - /sys/kernel/cgroup files to help dealing with new / optional
     features"

* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: export list of cgroups v2 features using sysfs
  cgroup: export list of delegatable control files using sysfs
  cgroup: mark @cgrp __maybe_unused in cpu_stat_show()
  MAINTAINERS: relocate cpuset.c
  cgroup, sched: Move basic cpu stats from cgroup.stat to cpu.stat
  sched: Implement interface for cgroup unified hierarchy
  sched: Misc preps for cgroup unified hierarchy interface
  sched/cputime: Add dummy cputime_adjust() implementation for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
  cgroup: statically initialize init_css_set->dfl_cgrp
  cgroup: Implement cgroup2 basic CPU usage accounting
  cpuacct: Introduce cgroup_account_cputime[_field]()
  sched/cputime: Expose cputime_adjust()
2017-11-15 14:29:44 -08:00
Linus Torvalds 5bbcc0f595 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Maintain the TCP retransmit queue using an rbtree, with 1GB
      windows at 100Gb this really has become necessary. From Eric
      Dumazet.

   2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.

   3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
      Lunn.

   4) Add meter action support to openvswitch, from Andy Zhou.

   5) Add a data meta pointer for BPF accessible packets, from Daniel
      Borkmann.

   6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.

   7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.

   8) More work to move the RTNL mutex down, from Florian Westphal.

   9) Add 'bpftool' utility, to help with bpf program introspection.
      From Jakub Kicinski.

  10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
      Dangaard Brouer.

  11) Support 'blocks' of transformations in the packet scheduler which
      can span multiple network devices, from Jiri Pirko.

  12) TC flower offload support in cxgb4, from Kumar Sanghvi.

  13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
      Leitner.

  14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.

  15) Add RED qdisc offloadability, and use it in mlxsw driver. From
      Nogah Frankel.

  16) eBPF based device controller for cgroup v2, from Roman Gushchin.

  17) Add some fundamental tracepoints for TCP, from Song Liu.

  18) Remove garbage collection from ipv6 route layer, this is a
      significant accomplishment. From Wei Wang.

  19) Add multicast route offload support to mlxsw, from Yotam Gigi"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
  tcp: highest_sack fix
  geneve: fix fill_info when link down
  bpf: fix lockdep splat
  net: cdc_ncm: GetNtbFormat endian fix
  openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
  netem: remove unnecessary 64 bit modulus
  netem: use 64 bit divide by rate
  tcp: Namespace-ify sysctl_tcp_default_congestion_control
  net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
  ipv6: set all.accept_dad to 0 by default
  uapi: fix linux/tls.h userspace compilation error
  usbnet: ipheth: prevent TX queue timeouts when device not ready
  vhost_net: conditionally enable tx polling
  uapi: fix linux/rxrpc.h userspace compilation errors
  net: stmmac: fix LPI transitioning for dwmac4
  atm: horizon: Fix irq release error
  net-sysfs: trigger netlink notification on ifalias change via sysfs
  openvswitch: Using kfree_rcu() to simplify the code
  openvswitch: Make local function ovs_nsh_key_attr_size() static
  openvswitch: Fix return value check in ovs_meter_cmd_features()
  ...
2017-11-15 11:56:19 -08:00
Ingo Molnar 8a103df440 Merge branch 'linus' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-08 10:17:15 +01:00
Roman Gushchin 5f2e673405 cgroup: export list of cgroups v2 features using sysfs
The active development of cgroups v2 sometimes leads to a creation
of interfaces, which are not turned on by default (to provide
backward compatibility). It's handy to know from userspace, which
cgroup v2 features are supported without calculating it based
on the kernel version. So, let's export the list of such features
using /sys/kernel/cgroup/features pseudo-file.

The list is hardcoded and has to be extended when new functionality
is added. Each feature is printed on a new line.

Example:
  $ cat /sys/kernel/cgroup/features
  nsdelegate

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: kernel-team@fb.com
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-06 12:01:57 -08:00
Roman Gushchin 01ee6cfb14 cgroup: export list of delegatable control files using sysfs
Delegatable cgroup v2 control files may require special handling
(e.g. chowning), and the exact list of such files varies between
kernel versions (and likely to be extended in the future).

To guarantee correctness of this list and simplify the life
of userspace (systemd, first of all), let's export the list
via /sys/kernel/cgroup/delegate pseudo-file.

Format is siple: each control file name is printed on a new line.
Example:
  $ cat /sys/kernel/cgroup/delegate
  cgroup.procs
  cgroup.subtree_control

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: kernel-team@fb.com
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-06 12:01:54 -08:00
David S. Miller 2a171788ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Files removed in 'net-next' had their license header updated
in 'net'.  We take the remove from 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04 09:26:51 +09:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00