Граф коммитов

18 Коммитов

Автор SHA1 Сообщение Дата
Micky Ching c42deffd5b mmc: rtsx: add support for pre_req and post_req
Add support for non-blocking request, pre_req() runs dma_map_sg() and
post_req() runs dma_unmap_sg(). This patch can increase card read/write
speed, especially for high speed card and slow CPU(for some embedded
platform).

Users can get a great benefit from this patch. if CPU frequency is 800MHz,
SDR104 or DDR50 card read/write speed may increase more than 15%.

test results:
intel i3(800MHz - 2.3GHz), SD card clock 208MHz

performance mode(2.3GHz):
Before:
dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024
67108864 bytes (67 MB) copied, 1.18191 s, 56.8 MB/s
After:
 dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024
67108864 bytes (67 MB) copied, 1.09276 s, 61.4 MB/s

powersave mode(800MHz):
Before:
dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024
67108864 bytes (67 MB) copied, 1.29569 s, 51.8 MB/s
After:
dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024
67108864 bytes (67 MB) copied, 1.11218 s, 60.3 MB/s

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22 13:34:20 -05:00
Micky Ching abcc6b2943 mmc: rtsx: modify phase searching method for tuning
The new phase searching method is more concise and easier to
understand.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22 13:34:18 -05:00
Micky Ching 640e09bc45 mmc: rtsx: fix card poweroff bug
If the host driver removed while card in the slot, the host will not
power off card power correctly. This bug is produced because host
eject flag set before the last mmc_set_ios callback, we should set the
eject flag after power off.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22 13:33:38 -05:00
Ulf Hansson ff71c4bcb0 mmc: rtsx: Remove redundant suspend and resume callbacks
Suspend and resume of cards are handled by the protocol layer and
consequently the mmc_suspend|resume_host APIs are marked as deprecated.

While moving away from using the deprecated APIs, there are nothing
left to be done for the suspend and resume callbacks, so remove them.

Cc: Wei WANG <wei_wang@realsil.com.cn>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-10-30 20:28:31 -04:00
Jackey Shen 71ef1ea418 mmc: core: clean up duplicate macros
Clean up the duplicate macros:
mmc_sd_card_uhs -> mmc_card_uhs
mmc_sd_card_set_uhs -> mmc_card_set_uhs

Signed-off-by: Jackey Shen <jackey.shen@amd.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:51:52 -04:00
Wei WANG 6228218064 mmc: memstick: rtsx: Modify copyright comments
Update copyright date, and remove author address.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30 14:25:10 +02:00
Wei WANG 1b8055b490 mmc: rtsx: Clear SD_CLK toggle enable bit if switching voltage fail
If switching voltage fails, SD_CLK toggle enable bit should been cleared
so that SD host can control SD clock automatically.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30 14:25:00 +02:00
Wei WANG 84d72f9cc2 mfd: mmc: rtsx: Change default tx phase
The default phase can meet most cards' requirement, but it is not the
optimal one. In some extreme situation, the rx phase point produced by
the following tuning process will drift quite a distance.
Before tuning UHS card, this patch will set a more proper initial tx
phase point, which is calculated from statistic data, and can achieve
a much better tx signal quality.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30 14:24:07 +02:00
Jingoo Han 113a87f868 mmc: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:23 -04:00
Wei WANG d88691be7b mmc: rtsx_pci_sdmmc: Don't execute power up sequence repeatedly
For some Realtek card readers, the power up sequence can only be executed
when power has been turned off fully.

So the rtsx host should not start power up sequence again when set_ios
been called if the power has been turned on.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:35:42 -04:00
Linus Torvalds ed5dc2372d MMC highlights for 3.9:
Core:
  - Support for packed commands in eMMC 4.5.  (This requires a host
    capability to be turned on.  It increases write throughput by 20%+,
    but may also increase average write latency; more testing needed.)
  - Add DT bindings for capability flags.
  - Add mmc_of_parse() for shared DT parsing between drivers.
 
 Drivers:
  - android-goldfish: New MMC driver for the Android Goldfish emulator.
  - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
  - omap_hsmmc: Fix boot hangs with RPMB partitions.
  - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
  - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
  - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
  - tmio_mmc: Add DT bindings, support for vccq regulator.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKmwHAAoJEHNBYZ7TNxYMNBYP/2FZRY33nrnJ0yKeMpyfdH+C
 LN+33imQudA2t86FlbAOocvcpM12oTPy+DkIbFchWhN1O4lzrqMos8/527QUm9qL
 cyCnZXrbst/Ttrs3UIbfkKNhA1m4Wau/taNPJ0fWqdmZU4424O774xSOyyB8m9x/
 DKuPIs6B9AfVAlS+OM8ZtviIvsJRgC6amZ0mNQZIKGHPm7vCTg6n35tP1ux7ZvJQ
 4dMlgqRalV+xN9gNBnCVLOc2eSwEyxIJA2m13LTHGf72pkNvSdYrID87qTJbvXOl
 Ed7PHuU3+M5bHw7ErCkbi8rmwuSuc8omNt9WK+syGLx4g7v7GceIYHNQudatdN7O
 gYUWnufT6Om6y+6h9QJ5td4ZZ7i6MhfC1Ps8hJCUjiVn+cLKlEPj0KmLAhZm+6cu
 wuBdCujeAFu7Z5VcaO2TBLHXXsgggnWbpoq7v6fucCNIleBe598Nu2YJAdbMc+W4
 8mONN4ANslTw7CAMrL3C99Ab1WVLZenX38schgDisTkGnI8dr/JCD4OpqAnPSKql
 qD5KCKRb8O4BMZpQxiFwyTzqYpmNM9RkaIykLxY5y26lgwFI+At9wh1HnhFC4Hl/
 ReJ5Cnm8sH19Vgz+5zpZzzS5/aCssObdfFImIfw1wWzwk9A8EHSjAZsVUkzXiVd4
 yRwz6eeO3gBMZ+v2humV
 =dYdW
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.9:

  Core:
   - Support for packed commands in eMMC 4.5.  (This requires a host
     capability to be turned on.  It increases write throughput by 20%+,
     but may also increase average write latency; more testing needed.)
   - Add DT bindings for capability flags.
   - Add mmc_of_parse() for shared DT parsing between drivers.

  Drivers:
   - android-goldfish: New MMC driver for the Android Goldfish emulator.
   - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
   - omap_hsmmc: Fix boot hangs with RPMB partitions.
   - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
   - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
   - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
   - tmio_mmc: Add DT bindings, support for vccq regulator"

* tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits)
  mmc: tegra: assume CONFIG_OF, remove platform data
  mmc: add DT bindings for more MMC capability flags
  mmc: tmio: add support for the VccQ regulator
  mmc: tmio: remove unused and deprecated symbols
  mmc: sh_mobile_sdhi: use managed resource allocations
  mmc: sh_mobile_sdhi: remove unused .pdata field
  mmc: tmio-mmc: parse device-tree bindings
  mmc: tmio-mmc: define device-tree bindings
  mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings
  mmc: (cosmetic) remove "extern" from function declarations
  mmc: provide a standard MMC device-tree binding parser centrally
  mmc: detailed definition of CD and WP MMC line polarities in DT
  mmc: sdhi, tmio: only check flags in tmio-mmc driver proper
  mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
  mmc: sdhci: check voltage range only on regulators aware of voltage value
  mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
  mmc: support packed write command for eMMC4.5 devices
  mmc: add packed command feature of eMMC4.5
  mmc: rtsx: remove driving adjustment
  mmc: use regulator_can_change_voltage() instead of regulator_count_voltages
  ...
2013-02-26 09:31:09 -08:00
Roger Tseng ac48653cec mmc: rtsx: remove driving adjustment
Several new models of readers use different way to select driving
capability (a necessary adjustment along with voltage change). Removing
this from device-independent rtsx_pci_sdmmc module. It will be implemented
in device-depend calls encapsulated by rtsx_pci_switch_output_voltage().

Signed-off-by: Roger Tseng <rogerable@realtek.com>
Reviewed-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:15 -05:00
Wei WANG c3481955f6 mfd: rtsx: Fix issue that booting OS with SD card inserted
Realtek card reader supports both SD and MS card. According to the
settings of rtsx MFD driver, SD host will be probed before MS host.
If we boot/reboot Linux with SD card inserted, the resetting flow of SD
card will succeed, and the following resetting flow of MS is sure to fail.
Then MS upper-level driver will ask rtsx driver to turn power off. This
request leads to the result that the following SD commands fail and SD card
can't be accessed again.

In this commit, Realtek's SD and MS host driver will check whether the card
that upper driver requesting is the one existing in the slot. If not, Realtek's
host driver will refuse the operation to make sure the exlusive accessing
at the same time.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14 00:24:12 +01:00
Wei WANG ef85e736b1 mmc: rtsx: Call MFD hook to switch output voltage
Different card reader has different method to switch output voltage, so
we have to use the callback function provided by MFD driver to switch
output pad voltage.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-27 01:29:57 +01:00
Wei WANG 433e075c7f mmc: rtsx: Explicitely include slab.h in rtsx_pci_sdmmc.c
This fixes the following build error on some architectures (parisc at least):

drivers/mmc/host/rtsx_pci_sdmmc.c: In function 'sd_normal_rw':
drivers/mmc/host/rtsx_pci_sdmmc.c:448:2: error: implicit
declaration of function 'kzalloc'
[-Werror=implicit-function-declaration]
drivers/mmc/host/rtsx_pci_sdmmc.c:448:6: warning: assignment
makes pointer from integer without a cast [enabled by default]
drivers/mmc/host/rtsx_pci_sdmmc.c:472:2: error: implicit
declaration of function 'kfree'
[-Werror=implicit-function-declaration]

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21 16:07:54 +01:00
Wei WANG 38d324df75 mmc: rtsx: Configure SD_CFG2 register in sd_rw_multi
For Realtek card reader, internal regsiter SD_CFG2 should be configured
before transferring data.
The default value of SD_CFG2 is proper for writing data. But for reading
sequence, the timing is not good enough. So in some extreme circumstance,
card reader may sample the response data from the card as good even if
the data is wrong. And this will cause the bad consequence.
In the prior version, the value of this register has been calculated,
but forgotten to write back to the internal register.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21 16:07:54 +01:00
Wei WANG 014483932b mmc: rtsx: Remove a duplicate command in sd_rw_multi
Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20 12:21:13 +01:00
Wei WANG ff984e57d3 mmc: Add realtek pcie sdmmc host driver
Realtek PCI-E SD/MMC card host driver is used to access SD/MMC card,
with the help of Realtek PCI-E card reader MFD driver.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-08 10:35:17 +01:00