Граф коммитов

40 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds d70b3ef54c Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
 "There were so many changes in the x86/asm, x86/apic and x86/mm topics
  in this cycle that the topical separation of -tip broke down somewhat -
  so the result is a more traditional architecture pull request,
  collected into the 'x86/core' topic.

  The topics were still maintained separately as far as possible, so
  bisectability and conceptual separation should still be pretty good -
  but there were a handful of merge points to avoid excessive
  dependencies (and conflicts) that would have been poorly tested in the
  end.

  The next cycle will hopefully be much more quiet (or at least will
  have fewer dependencies).

  The main changes in this cycle were:

   * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
     Gleixner)

     - This is the second and most intrusive part of changes to the x86
       interrupt handling - full conversion to hierarchical interrupt
       domains:

          [IOAPIC domain]   -----
                                 |
          [MSI domain]      --------[Remapping domain] ----- [ Vector domain ]
                                 |   (optional)          |
          [HPET MSI domain] -----                        |
                                                         |
          [DMAR domain]     -----------------------------
                                                         |
          [Legacy domain]   -----------------------------

       This now reflects the actual hardware and allowed us to distangle
       the domain specific code from the underlying parent domain, which
       can be optional in the case of interrupt remapping.  It's a clear
       separation of functionality and removes quite some duct tape
       constructs which plugged the remap code between ioapic/msi/hpet
       and the vector management.

     - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
       injection into guests (Feng Wu)

   * x86/asm changes:

     - Tons of cleanups and small speedups, micro-optimizations.  This
       is in preparation to move a good chunk of the low level entry
       code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
       Brian Gerst)

     - Moved all system entry related code to a new home under
       arch/x86/entry/ (Ingo Molnar)

     - Removal of the fragile and ugly CFI dwarf debuginfo annotations.
       Conversion to C will reintroduce many of them - but meanwhile
       they are only getting in the way, and the upstream kernel does
       not rely on them (Ingo Molnar)

     - NOP handling refinements. (Borislav Petkov)

   * x86/mm changes:

     - Big PAT and MTRR rework: making the code more robust and
       preparing to phase out exposing direct MTRR interfaces to drivers -
       in favor of using PAT driven interfaces (Toshi Kani, Luis R
       Rodriguez, Borislav Petkov)

     - New ioremap_wt()/set_memory_wt() interfaces to support
       Write-Through cached memory mappings.  This is especially
       important for good performance on NVDIMM hardware (Toshi Kani)

   * x86/ras changes:

     - Add support for deferred errors on AMD (Aravind Gopalakrishnan)

       This is an important RAS feature which adds hardware support for
       poisoned data.  That means roughly that the hardware marks data
       which it has detected as corrupted but wasn't able to correct, as
       poisoned data and raises an APIC interrupt to signal that in the
       form of a deferred error.  It is the OS's responsibility then to
       take proper recovery action and thus prolonge system lifetime as
       far as possible.

     - Add support for Intel "Local MCE"s: upcoming CPUs will support
       CPU-local MCE interrupts, as opposed to the traditional system-
       wide broadcasted MCE interrupts (Ashok Raj)

     - Misc cleanups (Borislav Petkov)

   * x86/platform changes:

     - Intel Atom SoC updates

  ... and lots of other cleanups, fixlets and other changes - see the
  shortlog and the Git log for details"

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
  x86/hpet: Use proper hpet device number for MSI allocation
  x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
  x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
  x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
  x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  iommu, x86: Properly handle posted interrupts for IOMMU hotplug
  iommu, x86: Provide irq_remapping_cap() interface
  iommu, x86: Setup Posted-Interrupts capability for Intel iommu
  iommu, x86: Add cap_pi_support() to detect VT-d PI capability
  iommu, x86: Avoid migrating VT-d posted interrupts
  iommu, x86: Save the mode (posted or remapped) of an IRTE
  iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
  iommu: dmar: Provide helper to copy shared irte fields
  iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
  iommu: Add new member capability to struct irq_remap_ops
  x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
  x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
  x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
  ...
2015-06-22 17:59:09 -07:00
Ashok Raj 88d538672e x86/mce: Add infrastructure to support Local MCE
Initialize and prepare for handling LMCEs. Add a boot-time
option to disable LMCEs.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
[ Simplify stuff, align statements for better readability, reflow comments; kill
  unused lmce_clear(); save us an MSR write if LMCE is already enabled. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1433436928-31903-16-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-07 15:33:14 +02:00
Borislav Petkov 54fd157805 x86/Documentation: Move kernel-stacks doc one level up
... to Documentation/x86/ as it is going to collect more and not
only 64-bit specific info.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/1432628901-18044-16-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-27 14:39:44 +02:00
Andrey Ryabinin ef7f0d6a6c x86_64: add KASan support
This patch adds arch specific code for kernel address sanitizer.

16TB of virtual addressed used for shadow memory.  It's located in range
[ffffec0000000000 - fffffc0000000000] between vmemmap and %esp fixup
stacks.

At early stage we map whole shadow region with zero page.  Latter, after
pages mapped to direct mapping address range we unmap zero pages from
corresponding shadow (see kasan_map_shadow()) and allocate and map a real
shadow memory reusing vmemmap_populate() function.

Also replace __pa with __pa_nodebug before shadow initialized.  __pa with
CONFIG_DEBUG_VIRTUAL=y make external function call (__phys_addr)
__phys_addr is instrumented, so __asan_load could be called before shadow
area initialized.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:41 -08:00
Andy Lutomirski 48e08d0fb2 x86, entry: Switch stacks on a paranoid entry from userspace
This causes all non-NMI, non-double-fault kernel entries from
userspace to run on the normal kernel stack.  Double-fault is
exempt to minimize confusion if we double-fault directly from
userspace due to a bad kernel stack.

This is, suprisingly, simpler and shorter than the current code.  It
removes the IMO rather frightening paranoid_userspace path, and it
make sync_regs much simpler.

There is no risk of stack overflow due to this change -- the kernel
stack that we switch to is empty.

This will also enable us to create non-atomic sections within
machine checks from userspace, which will simplify memory failure
handling.  It will also allow the upcoming fsgsbase code to be
simplified, because it doesn't need to worry about usergs when
scheduling in paranoid_exit, as that code no longer exists.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
2015-01-02 10:22:45 -08:00
Dave Hansen beb9147e95 x86/mm: Update memory map description to list hypervisor-reserved area
Peter Anvin says:

 > 0xffff880000000000 is the lowest usable address because we have
 > agreed to leave 0xffff800000000000-0xffff880000000000 for the
 > hypervisor or other non-OS uses.

Let's call this out in the documentation.

This came up during the kernel address sanitizer discussions
where it was proposed to use this area for other kernel things.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/20140918195606.841389D2@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-19 12:48:02 +02:00
H. Peter Anvin 3891a04aaf x86-64, espfix: Don't leak bits 31:16 of %esp returning to 16-bit stack
The IRET instruction, when returning to a 16-bit segment, only
restores the bottom 16 bits of the user space stack pointer.  This
causes some 16-bit software to break, but it also leaks kernel state
to user space.  We have a software workaround for that ("espfix") for
the 32-bit kernel, but it relies on a nonzero stack segment base which
is not available in 64-bit mode.

In checkin:

    b3b42ac2cb x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels

we "solved" this by forbidding 16-bit segments on 64-bit kernels, with
the logic that 16-bit support is crippled on 64-bit kernels anyway (no
V86 support), but it turns out that people are doing stuff like
running old Win16 binaries under Wine and expect it to work.

This works around this by creating percpu "ministacks", each of which
is mapped 2^16 times 64K apart.  When we detect that the return SS is
on the LDT, we copy the IRET frame to the ministack and use the
relevant alias to return to userspace.  The ministacks are mapped
readonly, so if IRET faults we promote #GP to #DF which is an IST
vector and thus has its own stack; we then do the fixup in the #DF
handler.

(Making #GP an IST exception would make the msr_safe functions unsafe
in NMI/MC context, and quite possibly have other effects.)

Special thanks to:

- Andy Lutomirski, for the suggestion of using very small stack slots
  and copy (as opposed to map) the IRET frame there, and for the
  suggestion to mark them readonly and let the fault promote to #DF.
- Konrad Wilk for paravirt fixup and testing.
- Borislav Petkov for testing help and useful comments.

Reported-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Lutomriski <amluto@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dirk Hohndel <dirk@hohndel.org>
Cc: Arjan van de Ven <arjan.van.de.ven@intel.com>
Cc: comex <comexk@gmail.com>
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # consider after upstream merge
2014-04-30 14:14:28 -07:00
Linus Torvalds bb1281f2aa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual rocket science stuff from trivial.git"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  neighbour.h: fix comment
  sched: Fix warning on make htmldocs caused by wait.h
  slab: struct kmem_cache is protected by slab_mutex
  doc: Fix typo in USB Gadget Documentation
  of/Kconfig: Spelling s/one/once/
  mkregtable: Fix sscanf handling
  lp5523, lp8501: comment improvements
  thermal: rcar: comment spelling
  treewide: fix comments and printk msgs
  IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart()
  Documentation: update /proc/uptime field description
  Documentation: Fix size parameter for snprintf
  arm: fix comment header and macro name
  asm-generic: uaccess: Spelling s/a ny/any/
  mtd: onenand: fix comment header
  doc: driver-model/platform.txt: fix a typo
  drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text
  doc: Fix typo (acces_process_vm -> access_process_vm)
  treewide: Fix typos in printk
  drivers/gpu/drm/qxl/Kconfig: reformat the help text
  ...
2014-01-22 21:21:55 -08:00
Richard Weinberger ff18dd8f1c Documentation: Update x86_64/boot-options.txt
Removed obsolte parameters from boot-options.txt.
Verified by grepping around in arch/x86/.

Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02 14:47:44 +01:00
Ingo Molnar 61d0669775 * New static EFI runtime services virtual mapping layout which is
groundwork for kexec support on EFI - Borislav Petkov
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJSfMDjAAoJEC84WcCNIz1V0LIP/2WyTbJR6bL0HXwnGLpxmxag
 v0VgnKRhypNboA3WEu4a9as6AdExqB7qsiWIipHuDSMj/vkfZgHAKTd2f1iRxmsJ
 RZxzwV6YzvsWkdXjvpCoLWKSsvQDug++BAIti1PitW6RXRjo01t3ymo/Ho1CQrpI
 hNJbB3bbihMF+uqFvdSpO0KZtZE6EtnylrfBeuo0GzqqJdTGe1MmqlWmyUlEy5JW
 ZiHV8E/xTjh3N675tWPcT9hGVfCyOXXu/kPrXsJTXrdYyZL9qgA9b8SVRLs6DctX
 wVgL9lNv4wobsmZJ5DxkYl9+TaF7rbshUeIJbzrQyMVJjb3TpXk/ZpspDMAEjL7e
 bb76c1bAx4xZuUatR/f1ykkWKAEryAhXHkvwcbIBjebW33if1MgGJLk5udJQQv6H
 j+J9ROH38MDr0Geg+pM2RnCyTz8l+q+8Mfu4Yh9TSte+ttB6fr9phs3/G+fdSUn1
 0vI627v1HWzDcBh4eZjjslzJviR8PldsGVT3EsIaOnHGtk/9FPz/7n4efph4v7+9
 yqTkLvQHxsAx7f0tR/qRpkEIQ9WTMXO0IO79OC13QTSATJSl+WSPTJM7ccqOgn+P
 h89ssBnzlwmFHkuvTi599KVHdzOZrWTsB2zROn+NnSchJ+YAY6TXwznk3/MNo9rB
 d+euVcffL4yfWZ7Bzj8Z
 =w6ff
 -----END PGP SIGNATURE-----

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/efi

Pull EFI virtual mapping changes from Matt Fleming:

  * New static EFI runtime services virtual mapping layout which is
    groundwork for kexec support on EFI. (Borislav Petkov)

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-26 12:23:04 +01:00
Borislav Petkov d2f7cbe7b2 x86/efi: Runtime services virtual mapping
We map the EFI regions needed for runtime services non-contiguously,
with preserved alignment on virtual addresses starting from -4G down
for a total max space of 64G. This way, we provide for stable runtime
services addresses across kernels so that a kexec'd kernel can still use
them.

Thus, they're mapped in a separate pagetable so that we don't pollute
the kernel namespace.

Add an efi= kernel command line parameter for passing miscellaneous
options and chicken bits from the command line.

While at it, add a chicken bit called "efi=old_map" which can be used as
a fallback to the old runtime services mapping method in case there's
some b0rkage with a particular EFI implementation (haha, it is hard to
hold up the sarcasm here...).

Also, add the UEFI RT VA space to Documentation/x86/x86_64/mm.txt.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-11-02 11:09:36 +00:00
Naveen N. Rao 9ad95879cd mce: acpi/apei: Add a boot option to disable ff mode for corrected errors
Add a boot option to disable firmware first mode for corrected errors.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-08 11:54:28 -07:00
Linus Torvalds 39b2f8656e Merge branch 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 debug update from Ingo Molnar:
 "Two small changes: a documentation update and a constification"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, early-printk: Update earlyprintk documentation (and kill x86 copy)
  x86: Constify a few items
2013-04-30 08:35:20 -07:00
Dave Hansen 147ea09119 x86, early-printk: Update earlyprintk documentation (and kill x86 copy)
Documentation/kernel-parameters.txt and
Documentation/x86/x86_64/boot-options.txt contain virtually
identical text describing earlyprintk.

This consolidates the two copies and updates the documentation a
bit.  No one ever documented the:

	earlyprintk=serial,0x1008,115200

syntax, nor mentioned that ARM is now a supported earlyprintk
arch.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rob Landley <rob@landley.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20130410210338.E2930E98@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-11 10:30:40 +02:00
Borislav Petkov aca91bfc67 x86-64, docs, mm: Add vsyscall range to virtual address space layout
Add the end of the virtual address space to its layout documentation.

Signed-off-by: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1362428180-8865-4-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-02 16:03:31 -07:00
Jiri Kosina 5c8d1b68e0 time: x86: report_lost_ticks doesn't exist any more
'report_lost_ticks' parameter has been removed back in 2007 through
1489939f0a ("time: x86_64: convert x86_64 to use GENERIC_TIME").

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-23 12:12:18 +01:00
Naveen N. Rao 450cc20103 x86/mce: Provide boot argument to honour bios-set CMCI threshold
The ACPI spec doesn't provide for a way for the bios to pass down
recommended thresholds to the OS on a _per-bank_ basis. This patch adds
a new boot option, which if passed, tells Linux to use CMCI thresholds
set by the bios.

As fail-safe, we initialize threshold to 1 if some banks have not been
initialized by the bios and warn the user.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-09-27 10:08:00 -07:00
Joerg Roedel fffcda1183 x86, gart: Rename pci-gart_64.c to amd_gart_64.c
This file only contains code relevant for the northbridge
gart in AMD processors. This patch renames the file to
represent this fact in the filename.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-05-10 17:22:06 +02:00
Olaf Hering d404ab0a11 move x86 specific oops=panic to generic code
The oops=panic cmdline option is not x86 specific, move it to generic code.
Update documentation.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:11 -07:00
Lucas De Marchi a6c3270b04 x86: Fix misspelling and align params
Fix 'upto' misspelling and align parameters.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: trivial@kernel.org
LKML-Reference: <1300389856-1099-2-git-send-email-lucas.demarchi@profusion.mobi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-18 10:39:30 +01:00
Christoph Hellwig 7974891db2 x86: Always use irq stacks
IRQ stacks provide much better safety against unexpected stack use from
interrupts, at the minimal downside of slightly higher memory usage.
Enable irq stacks also for the default 8k stack on 32-bit kernels to
minimize the problem of stack overflows through interrupt activity.

This is what the 64-bit kernel and various other architectures already do.

Signed-off-by: Christoph Hellwig <hch@lst.de>
LKML-Reference: <20100628121554.GA6605@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-06-29 12:12:59 +02:00
David Rientjes ca2107c9d6 x86, numa: Remove configurable node size support for numa emulation
Now that numa=fake=<size>[MG] is implemented, it is possible to remove
configurable node size support.  The command-line parsing was already
broken (numa=fake=*128, for example, would not work) and since fake nodes
are now interleaved over physical nodes, this support is no longer
required.

Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1002151343080.26927@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-15 14:34:18 -08:00
David Rientjes 8df5bb34de x86, numa: Add fixed node size option for numa emulation
numa=fake=N specifies the number of fake nodes, N, to partition the
system into and then allocates them by interleaving over physical nodes.
This requires knowledge of the system capacity when attempting to
allocate nodes of a certain size: either very large nodes to benchmark
scalability of code that operates on individual nodes, or very small
nodes to find bugs in the VM.

This patch introduces numa=fake=<size>[MG] so it is possible to specify
the size of each node to allocate.  When used, nodes of the size
specified will be allocated and interleaved over the set of physical
nodes.

FAKE_NODE_MIN_SIZE was also moved to the more-appropriate
include/asm/numa_64.h.

Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1002151342510.26927@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-15 14:34:10 -08:00
Ingo Molnar 0d5959723e Merge branch 'linus' into x86/mce3
Conflicts:
	arch/x86/kernel/cpu/mcheck/mce_64.c
	arch/x86/kernel/irq.c

Merge reason: Resolve the conflicts above.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 23:31:52 +02:00
Hidetoshi Seto 62fdac5913 x86, mce: Add boot options for corrected errors
This patch introduces three boot options (no_cmci, dont_log_ce
and ignore_ce) to control handling for corrected errors.

The "mce=no_cmci" boot option disables the CMCI feature.

Since CMCI is a new feature so having boot controls to disable
it will be a help if the hardware is misbehaving.

The "mce=dont_log_ce" boot option disables logging for corrected
errors. All reported corrected errors will be cleared silently.
This option will be useful if you never care about corrected
errors.

The "mce=ignore_ce" boot option disables features for corrected
errors, i.e. polling timer and cmci.  All corrected events are
not cleared and kept in bank MSRs.

Usually this disablement is not recommended, however it will be
a help if there are some conflict with the BIOS or hardware
monitoring applications etc., that clears corrected events in
banks instead of OS.

[ And trivial cleanup (space -> tab) for doc is included. ]

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <4A30ACDF.5030408@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 11:42:18 +02:00
Andi Kleen 3c0797925f x86, mce: switch x86 machine check handler to Monarch election.
On Intel platforms machine check exceptions are always broadcast to
all CPUs.  This patch makes the machine check handler synchronize all
these machine checks, elect a Monarch to handle the event and collect
the worst event from all CPUs and then process it first.

This has some advantages:

- When there is a truly data corrupting error the system panics as
  quickly as possible. This improves containment of corrupted
  data and makes sure the corrupted data never hits stable storage.

- The panics are synchronized and do not reenter the panic code
  on multiple CPUs (which currently does not handle this well).

- All the errors are reported. Currently it often happens that
  another CPU happens to do the panic first, but reports useless
  information (empty machine check) because the real error
  happened on another CPU which came in later.
  This is a big advantage on Nehalem where the 8 threads per CPU
  lead to often the wrong CPU winning the race and dumping
  useless information on a machine check.  The problem also occurs
  in a less severe form on older CPUs.

- The system can detect when no CPUs detected a machine check
  and shut down the system.  This can happen when one CPU is so
  badly hung that that it cannot process a machine check anymore
  or when some external agent wants to stop the system by
  asserting the machine check pin.  This follows Intel hardware
  recommendations.

- This matches the recommended error model by the CPU designers.

- The events can be output in true severity order

- When a panic happens on another CPU it makes sure to be actually
  be able to process the stop IPI by enabling interrupts.

The code is extremly careful to handle timeouts while waiting
for other CPUs. It can't rely on the normal timing mechanisms
(jiffies, ktime_get) because of its asynchronous/lockless nature,
so it uses own timeouts using ndelay() and a "SPINUNIT"

The timeout is configurable. By default it waits for upto one
second for the other CPUs.  This can be also disabled.

From some informal testing AMD systems do not see to broadcast
machine checks, so right now it's always disabled by default on
non Intel CPUs or also on very old Intel systems.

Includes fixes from Ying Huang
Fixed a "ecception" in a comment (H.Seto)
Moved global_nwo reset later based on suggestion from H.Seto
v2: Avoid duplicate messages

[ Impact: feature, fixes long standing problems. ]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-03 14:45:12 -07:00
Andi Kleen 8780e8e0f6 x86, mce: improve documentation
Document that check_interval set to 0 means no polling.
Noticed by Hidetoshi Seto

Also add a reference from boot options to the sysfs tunables

Acked-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-28 09:24:15 -07:00
Yinghai Lu 888a589f6b mm, x86: remove MEMORY_HOTPLUG_RESERVE related code
after:

 | commit b263295dbf
 | Author: Christoph Lameter <clameter@sgi.com>
 | Date:   Wed Jan 30 13:30:47 2008 +0100
 |
 |    x86: 64-bit, make sparsemem vmemmap the only memory model

we don't have MEMORY_HOTPLUG_RESERVE anymore.

Historically, x86-64 had an architecture-specific method for memory hotplug
whereby it scanned the SRAT for physical memory ranges that could be
potentially used for memory hot-add later. By reserving those ranges
without physical memory, the memmap would be allocated and left dormant
until needed. This depended on the DISCONTIG memory model which has been
removed so the code implementing HOTPLUG_RESERVE is now dead.

This patch removes the dead code used by MEMORY_HOTPLUG_RESERVE.

(Changelog authored by Mel.)

v2: updated changelog, and remove hotadd= in doc

[ Impact: remove dead code ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Mel Gorman <mel@csn.ul.ie>
Workflow-found-OK-by: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A0C4910.7090508@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 09:13:31 +02:00
H. Peter Anvin 2feceeff1e x86: fix typo in address space documentation
Fix a trivial typo in Documentation/x86/x86_64/mm.txt.

[ Impact: documentation only ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Rik van Riel <riel@redhat.com>
2009-05-05 19:10:18 -07:00
Rik van Riel c898faf91b x86: 46 bit physical address support on 64 bits
Extend the maximum addressable memory on x86-64 from 2^44 to
2^46 bytes. This requires some shuffling around of the vmalloc
and virtual memmap memory areas, to keep them away from the
direct mapping of up to 64TB of physical memory.

This patch also introduces a guard hole between the vmalloc
area and the virtual memory map space.  There's really no
good reason why we wouldn't have a guard hole there.

[ Impact: future hardware enablement ]

Signed-off-by: Rik van Riel <riel@redhat.com>
LKML-Reference: <20090505172856.6820db22@cuia.bos.redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-05 19:10:18 -07:00
Thadeu Lima de Souza Cascardo 21acb9caa2 trivial: fix where cgroup documentation is not correctly referred to
cgroup documentation was moved to Documentation/cgroups/. There are some
places that still refer to Documentation/controllers/,
Documentation/cgroups.txt and Documentation/cpusets.txt. Fix those.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:22:02 +02:00
Ingo Molnar fa623d1b02 Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core 2008-12-23 16:27:23 +01:00
Ingo Molnar 78f902ccc5 Merge commit 'v2.6.28-rc8' into x86/doc 2008-12-16 22:04:48 +01:00
Jiri Slaby a4c52791fa x86, 64-bit: update address space documentation
Impact: documentation update

Commit a6523748bd
(paravirt/x86, 64-bit: move __PAGE_OFFSET to leave a space for hypervisor)
changed address space without changing the documentation.

Change it according to the code change -- direct mapping start:
ffff810000000000 => ffff880000000000 which gives 57 TiB, something
between 45 and 46 bits.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 19:30:28 +01:00
Cyrill Gorcunov 5b9a0e14eb x86: nmi - nmi_watchdog boot param docs cleanup
Impact: documentation update

1) nmi_watchdog boot parameter is common to 32/64 bit modes. So
   move it from Documentation/x86/x86_64/boot-options.txt to
   Documentation/kernel-parameters.txt and integrate with.

2) Also fix [panic] keyword placement -- it ought to be at first
   position otherwise it will not be recognized.

3) Document lapic and ioapic keywords.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-03 09:17:39 +01:00
Uwe Hermann 71cced6eb0 doc/x86: fix doc subdirs
The Documentation/i386 and Documentation/x86_64 directories and their
contents have been moved into Documentation/x86. Fix references to
those files accordingly.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-28 16:36:42 +01:00
Luiz Fernando N. Capitulino 1befdefcf4 x86: remove 8254 timer texts from Documentation
Commit ecd29476ae removed the
"disable_8254_timer" and "enable_8254_timer" kernel parameters from
the kernel but did not remove the references to them from two
files in the Documentation directory: kernel-parameters.txt and
x86/x86_64/boot-options.txt.

This change completes the removal.

Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 18:20:14 +02:00
Paul Jackson 200001eb14 x86 boot: only pick up additional EFI memmap if add_efi_memmap flag
Applies on top of the previous patch:
  x86 boot: add code to add BIOS provided EFI memory entries to kernel

Instead of always adding EFI memory map entries (if present) to the
memory map after initially finding either E820 BIOS memory map entries
and/or kernel command line memmap entries, -instead- only add such
additional EFI memory map entries if the kernel boot option:

    add_efi_memmap

is specified.

Requiring this 'add_efi_memmap' option is backward compatible with
kernels that didn't load such additional EFI memory map entries in
the first place, and it doesn't override a configuration that tries
to replace all E820 or EFI BIOS memory map entries with ones given
entirely on the kernel command line.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Cc: "Jack Steiner" <steiner@sgi.com>
Cc: "Mike Travis" <travis@sgi.com>
Cc: "Huang
Cc: Ying" <ying.huang@intel.com>
Cc: "Andi Kleen" <andi@firstfloor.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:10:41 +02:00
Ingo Molnar 3c1ca43faf Merge branch 'x86/setup' into x86/devel 2008-07-08 09:43:01 +02:00
H. Peter Anvin 23deb06821 x86: move x86-specific documentation into Documentation/x86
The current organization of the x86 documentation makes it appear as
if the "i386" documentation doesn't apply to x86-64, which is does.
Thus, move that documentation into Documentation/x86, and move the
x86-64-specific stuff into Documentation/x86/x86_64 with the eventual
goal to move stuff that isn't actually 64-bit specific back into
Documentation/x86.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-05-30 17:19:03 -07:00