Граф коммитов

21 Коммитов

Автор SHA1 Сообщение Дата
Ezequiel Garcia c8af34b4db clocksource: armada-370-xp: Use atomic access for shared registers
Replace the driver-specific thread-safe shared register API
by the recently introduced atomic_io_clear_set().

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-03-11 23:05:05 +01:00
Ingo Molnar 1b3f828760 Merge branch 'clockevents/3.14' of git://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/clockevent updates from Daniel Lezcano:

  * Axel Lin removed an unused structure defining the ids for the
    bcm kona driver.

  * Ezequiel Garcia enabled the timer divider only when the 25MHz
    timer is not used for the armada 370 XP.

  * Jingoo Han removed a pointless platform data initialization for
    the sh_mtu and sh_mtu2.

  * Laurent Pinchart added the clk_prepare/clk_unprepare for sh_cmt.

  * Linus Walleij added a useful warning in clk_of when no clocks
    are found while the old behavior was to silently hang at boot time.

  * Maxime Ripard added the high speed timer drivers for the
    Allwinner SoCs (A10, A13, A20). He increased the rating, shared the
    irq across all available cpus and fixed the clockevent's irq
    initialization for the sun4i.

  * Michael Opdenacker removed the usage of the IRQF_DISABLED for the
    all the timers driver located in drivers/clocksource.

  * Stephen Boyd switched to sched_clock_register for the
    arm_global_timer, cadence_ttc, sun4i and orion timers.

Conflicts:
	drivers/clocksource/clksrc-of.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-14 14:33:29 +01:00
Ezequiel Garcia 08cb8e4609 clocksource: armada-370-xp: Enable timer divider only when needed
The current code sets the timer divider bits always. However, when
the 25 MHz timer is enabled, this is not needed and has no effect.
As this causes some confusion, rework the code so the divider is
set only when needed, i.e. when the 25 MHz timer is not in use.

Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11 11:40:26 +01:00
Ezequiel Garcia c813eff078 clocksource: armada-370-xp: Register sched_clock after the counter reset
This commit registers the sched_clock _after_ the counter reset
(instead of before). This removes the timestamp 'jump' in kernel
log messages.

Before this change:

[    0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns
[    0.000000] Initializing Coherency fabric
[    0.000000] Aurora cache controller enabled
[    0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB
[  163.507447] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528)
[  163.521419] pid_max: default: 32768 minimum: 301
[  163.526185] Mount-cache hash table entries: 512
[  163.531095] CPU: Testing write buffer coherency: ok

After this change:

[    0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns
[    0.000000] Initializing Coherency fabric
[    0.000000] Aurora cache controller enabled
[    0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB
[    0.016849] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528)
[    0.030820] pid_max: default: 32768 minimum: 301
[    0.035588] Mount-cache hash table entries: 512
[    0.040500] CPU: Testing write buffer coherency: ok

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
2013-12-10 19:41:27 +01:00
John Stultz 17deb9c2db Merge remote-tracking branch 'tip/timers/core' into fordlezcano/3.13/sched-clock64-conversion
Update to tip/timers/core and resolve minor conflict.

Conflicts:
	drivers/clocksource/samsung_pwm_timer.c

Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-09-26 12:05:54 -07:00
Linus Torvalds a4ae54f90e Merge branch 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer code update from Thomas Gleixner:
 - armada SoC clocksource overhaul with a trivial merge conflict
 - Minor improvements to various SoC clocksource drivers

* 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: armada-370-xp: Add detailed clock requirements in devicetree binding
  clocksource: armada-370-xp: Get reference fixed-clock by name
  clocksource: armada-370-xp: Replace WARN_ON with BUG_ON
  clocksource: armada-370-xp: Fix device-tree binding
  clocksource: armada-370-xp: Introduce new compatibles
  clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE
  clocksource: armada-370-xp: Simplify TIMER_CTRL register access
  clocksource: armada-370-xp: Use BIT()
  ARM: timer-sp: Set dynamic irq affinity
  ARM: nomadik: add dynamic irq flag to the timer
  clocksource: sh_cmt: 32-bit control register support
  clocksource: em_sti: Convert to devm_* managed helpers
2013-09-16 16:10:26 -04:00
Ezequiel Garcia 5e9fe6cb1b clocksource: armada-370-xp: Get reference fixed-clock by name
The Armada XP timer has two mandatory clock inputs: nbclk and refclk,
as specified by the device-tree binding.

This commit fixes the clock selection. Instead of hard-coding the clock
rate for the 25 MHz reference fixed-clock, obtain the clock by its name.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2013-09-02 21:44:52 +02:00
Ezequiel Garcia ec8e51120a clocksource: armada-370-xp: Replace WARN_ON with BUG_ON
If the clock fails to be obtained and the timer fails to be properly
registered, the kernel will freeze real soon. Instead, let's BUG()
where the actual problem is located.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2013-09-02 21:44:13 +02:00
Ezequiel Garcia 7cd6392c9b clocksource: armada-370-xp: Introduce new compatibles
The Armada XP SoC clocksource driver cannot work without the 25 MHz
fixed timer. Therefore it's appropriate to introduce a new compatible
string and use it to set the 25 MHz fixed timer.

The 'marvell,timer-25MHz' property will be marked as deprecated.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
2013-09-02 21:44:03 +02:00
Ezequiel Garcia 573145f08c clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE
This is almost cosmetic: we achieve a bit of consistency with
other clocksource drivers by using the CLOCKSOURCE_OF_DECLARE
macro for the boilerplate code.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
2013-09-02 21:44:01 +02:00
Ezequiel Garcia 3579698e85 clocksource: armada-370-xp: Simplify TIMER_CTRL register access
This commit creates two functions to access the TIMER_CTRL register:
one for global one for the per-cpu. This makes the code much more
readable. In addition, since the TIMER_CTRL register is also used for
watchdog, this is preparation work for future thread-safe improvements.

Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-09-02 21:43:58 +02:00
Ezequiel Garcia ad48bd618f clocksource: armada-370-xp: Use BIT()
This is a purely cosmetic commit: we replace hardcoded values that
representing bits by BIT(), which is slightly more readable.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
2013-09-02 21:40:05 +02:00
Stephen Boyd d9dbcbe0ea clocksource: time-armada-370-xp: Switch to sched_clock_register()
The 32 bit sched_clock interface now supports 64 bits. Upgrade to
the 64 bit function to allow us to remove the 32 bit registration
interface.

Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-07-30 11:24:54 -07:00
Olof Johansson 47dcd3563e Now that we have a generic arch hook for broadcast we can remove the local
timer API entirely. Doing so will reduce code in ARM core, reduce the
 architecture dependencies of our timer drivers, and simplify the code because
 we no longer go through an architecture layer that is essentially a hotplug
 notifier.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABCAAGBQJRydGwAAoJENidgRMleOc9tMMP/Awy0ETkLHQkXdFdRNLQH7Jd
 BpDagzBkpt/U/qsh2Dy5Yhz7Qf/HQg6CwJK/b1apHguSPzNcSov+YS7ArPV+kuDY
 9OCF5wkVqPW7BPHlxJ+2QAjayIFUaBR+35kpiU+hv9Gkhs11oK90iAWxEIDUGzA6
 5miuOVJeyDEwV8des3NYmVVOKziHLJjX3fjMVnc2gxE6PLmOEUQ9t42bVU1aCfub
 pRMUXNuG+aFk8lRExPfs4wWfEKCOHrgJPSE4OPFp3pDJeqhFi5tXTiPBQ22FpNf5
 78fEDeguS0QS6f/3rGKSdGu/Yz5Lmcldv4tOkfzvNaZP7zhE18wKJu6bSCrZ/Onn
 MnhriYWZh+YgX1V8wTMFMPEV+OR+FJdN4C8PhvNWmMC1Xoq25HtrVQUP5aElgAJs
 mLcgTXxLYpvZH3jPxdtMR9IuDc+86qmFerGShWqp/1YaNHwpR8dNZxFyVNfw+FUL
 /GoAjk/6MsJlZUchiF7I8yp4jYyMcXcV8Bi4tgIAf5rJO9PZBpuxtyAL9uVHnL13
 pwkctMnMQwoP6AE9uYfbdnHCKJxF1hny4tKI5sNxAmK8I6bBkfibIZ3sNRAbSrY7
 56kV+tJrrgvgAUDkgdluyS9eFs26iHGPsHK4lmzJzFylWmvWFa8tWpP6G0kCa0wP
 A1XCqUOryLeL8enPV+z2
 =wZbm
 -----END PGP SIGNATURE-----

Merge tag 'remove-local-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup

From Stephen Boyd:

Now that we have a generic arch hook for broadcast we can remove the
local timer API entirely. Doing so will reduce code in ARM core, reduce
the architecture dependencies of our timer drivers, and simplify the code
because we no longer go through an architecture layer that is essentially
a hotplug notifier.

* tag 'remove-local-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm:
  ARM: smp: Remove local timer API
  clocksource: time-armada-370-xp: Divorce from local timer API
  clocksource: time-armada-370-xp: Fix sparse warning
  ARM: msm: Divorce msm_timer from local timer API
  ARM: PRIMA2: Divorce timer-marco from local timer API
  ARM: EXYNOS4: Divorce mct from local timer API
  ARM: OMAP2+: Divorce from local timer API
  ARM: smp_twd: Divorce smp_twd from local timer API
  ARM: smp: Remove duplicate dummy timer implementation

Resolved a large number of conflicts due to __cpuinit cleanups, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23 16:54:15 -07:00
Paul Gortmaker 8c37bb3ac9 clocksource+irqchip: delete __cpuinit usage from all related files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the drivers/clocksource and drivers/irqchip uses of
the __cpuinit macros from all C files.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:57 -04:00
Stephen Boyd 5ddb6d21c3 clocksource: time-armada-370-xp: Divorce from local timer API
Separate the armada 370xp local timers from the local timer API.
This will allow us to remove ARM local timer support in the near
future and makes this driver multi-architecture friendly.

Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-06-24 17:47:34 -07:00
Stephen Boyd faef31b482 clocksource: time-armada-370-xp: Fix sparse warning
drivers/clocksource/time-armada-370-xp.c:217:13: warning: symbol
'armada_370_xp_timer_init' was not declared. Should it be static?

Also remove the __init marking in the prototype as it's
unnecessary and drop the init.h file.

Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-06-24 17:47:21 -07:00
Stephen Boyd 38ff87f77a sched_clock: Make ARM's sched_clock generic for all architectures
Nothing about the sched_clock implementation in the ARM port is
specific to the architecture. Generalize the code so that other
architectures can use it by selecting GENERIC_SCHED_CLOCK.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
[jstultz: Merge minor collisions with other patches in my tree]
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-06-12 14:02:13 -07:00
Gregory CLEMENT ddd3f69f9f clocksource: time-armada-370-xp: add local timer support
On the SOCs Armada 370 and Armada XP, each CPU comes with two private
timers. This patch use the timer 0 of each CPU as local timer for the
clockevent if CONFIG_LOCAL_TIMER is selected. In the other case, use
only the private Timer 0 of CPU 0.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28 18:57:07 +01:00
Gregory CLEMENT 307c2bf467 clocksource: convert time-armada-370-xp to clk framework
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by Gregory CLEMENT <gregory.clement@free-electrons.com>
2012-11-20 14:46:49 +01:00
Gregory CLEMENT 6fe9cbd111 clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver
Timer 0 is used as free-running clocksource, while timer 1 is used as
clock_event_device.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yehuda Yitschak <yehuday@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: John Stultz <johnstul@us.ibm.com>
2012-07-10 15:47:46 +02:00