Граф коммитов

69 Коммитов

Автор SHA1 Сообщение Дата
Paolo Bonzini cc568ead3c Patch queue for ppc - 2014-08-01
Highlights in this release include:
 
   - BookE: Rework instruction fetch, not racy anymore now
   - BookE HV: Fix ONE_REG accessors for some in-hardware registers
   - Book3S: Good number of LE host fixes, enable HV on LE
   - Book3S: Some misc bug fixes
   - Book3S HV: Add in-guest debug support
   - Book3S HV: Preload cache lines on context switch
   - Remove 440 support
 
 Alexander Graf (31):
       KVM: PPC: Book3s PR: Disable AIL mode with OPAL
       KVM: PPC: Book3s HV: Fix tlbie compile error
       KVM: PPC: Book3S PR: Handle hyp doorbell exits
       KVM: PPC: Book3S PR: Fix ABIv2 on LE
       KVM: PPC: Book3S PR: Fix sparse endian checks
       PPC: Add asm helpers for BE 32bit load/store
       KVM: PPC: Book3S HV: Make HTAB code LE host aware
       KVM: PPC: Book3S HV: Access guest VPA in BE
       KVM: PPC: Book3S HV: Access host lppaca and shadow slb in BE
       KVM: PPC: Book3S HV: Access XICS in BE
       KVM: PPC: Book3S HV: Fix ABIv2 on LE
       KVM: PPC: Book3S HV: Enable for little endian hosts
       KVM: PPC: Book3S: Move vcore definition to end of kvm_arch struct
       KVM: PPC: Deflect page write faults properly in kvmppc_st
       KVM: PPC: Book3S: Stop PTE lookup on write errors
       KVM: PPC: Book3S: Add hack for split real mode
       KVM: PPC: Book3S: Make magic page properly 4k mappable
       KVM: PPC: Remove 440 support
       KVM: Rename and add argument to check_extension
       KVM: Allow KVM_CHECK_EXTENSION on the vm fd
       KVM: PPC: Book3S: Provide different CAPs based on HV or PR mode
       KVM: PPC: Implement kvmppc_xlate for all targets
       KVM: PPC: Move kvmppc_ld/st to common code
       KVM: PPC: Remove kvmppc_bad_hva()
       KVM: PPC: Use kvm_read_guest in kvmppc_ld
       KVM: PPC: Handle magic page in kvmppc_ld/st
       KVM: PPC: Separate loadstore emulation from priv emulation
       KVM: PPC: Expose helper functions for data/inst faults
       KVM: PPC: Remove DCR handling
       KVM: PPC: HV: Remove generic instruction emulation
       KVM: PPC: PR: Handle FSCR feature deselects
 
 Alexey Kardashevskiy (1):
       KVM: PPC: Book3S: Fix LPCR one_reg interface
 
 Aneesh Kumar K.V (4):
       KVM: PPC: BOOK3S: PR: Fix PURR and SPURR emulation
       KVM: PPC: BOOK3S: PR: Emulate virtual timebase register
       KVM: PPC: BOOK3S: PR: Emulate instruction counter
       KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page
 
 Anton Blanchard (2):
       KVM: PPC: Book3S HV: Fix ABIv2 indirect branch issue
       KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC()
 
 Bharat Bhushan (10):
       kvm: ppc: bookehv: Added wrapper macros for shadow registers
       kvm: ppc: booke: Use the shared struct helpers of SRR0 and SRR1
       kvm: ppc: booke: Use the shared struct helpers of SPRN_DEAR
       kvm: ppc: booke: Add shared struct helpers of SPRN_ESR
       kvm: ppc: booke: Use the shared struct helpers for SPRN_SPRG0-7
       kvm: ppc: Add SPRN_EPR get helper function
       kvm: ppc: bookehv: Save restore SPRN_SPRG9 on guest entry exit
       KVM: PPC: Booke-hv: Add one reg interface for SPRG9
       KVM: PPC: Remove comment saying SPRG1 is used for vcpu pointer
       KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr
 
 Michael Neuling (1):
       KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling
 
 Mihai Caraman (8):
       KVM: PPC: e500mc: Enhance tlb invalidation condition on vcpu schedule
       KVM: PPC: e500: Fix default tlb for victim hint
       KVM: PPC: e500: Emulate power management control SPR
       KVM: PPC: e500mc: Revert "add load inst fixup"
       KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1
       KVM: PPC: Book3s: Remove kvmppc_read_inst() function
       KVM: PPC: Allow kvmppc_get_last_inst() to fail
       KVM: PPC: Bookehv: Get vcpu's last instruction for emulation
 
 Paul Mackerras (4):
       KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling
       KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled
       KVM: PPC: Book3S PR: Take SRCU read lock around RTAS kvm_read_guest() call
       KVM: PPC: Book3S: Make kvmppc_ld return a more accurate error indication
 
 Stewart Smith (2):
       Split out struct kvmppc_vcore creation to separate function
       Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJT21skAAoJECszeR4D/txgeFEP/AzJopN7s//W33CfyBqURHXp
 XALCyAw+S67gtcaTZbxomcG1xuT8Lj9WEw28iz3rCtAnJwIxsY63xrI1nXMzTaI2
 p1rC0ai5Qy+nlEbd6L78spZy/Nzh8DFYGWx78iUSO1mYD8xywJwtoiBA539pwp8j
 8N+mgn61Hwhv31bKtsZlmzXymVr/jbTp5LVuxsBLJwD2lgT49g+4uBnX2cG/iXkg
 Rzbh7LxoNNXrSPI8sYmTWu/81aeXteeX70ja6DHuV5dWLNTuAXJrh5EUfeAZqBrV
 aYcLWUYmIyB87txNmt6ZGVar2p3jr2Xhb9mKx+EN4dbehblanLc1PUqlHd0q3dKc
 Nt60ByqpZn+qDAK86dShSZLEe+GT3lovvE76CqVXD4Er+OUEkc9JoxhN1cof/Gb0
 o6uwZ2isXHRdGoZx5vb4s3UTOlwZGtoL/CyY/HD/ujYDSURkCGbxLj3kkecSY8ut
 QdDAWsC15BwsHtKLr5Zwjp2w+0eGq2QJgfvO0zqWFiz9k33SCBCUpwluFeqh27Hi
 aR5Wir3j+MIw9G8XlYlDJWYfi0h/SZ4G7hh7jSu26NBNBzQsDa8ow/cLzdMhdUwH
 OYSaeqVk5wiRb9to1uq1NQWPA0uRAx3BSjjvr9MCGRqmvn+FV5nj637YWUT+53Hi
 aSvg/U2npghLPPG2cihu
 =JuLr
 -----END PGP SIGNATURE-----

Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into kvm

Patch queue for ppc - 2014-08-01

Highlights in this release include:

  - BookE: Rework instruction fetch, not racy anymore now
  - BookE HV: Fix ONE_REG accessors for some in-hardware registers
  - Book3S: Good number of LE host fixes, enable HV on LE
  - Book3S: Some misc bug fixes
  - Book3S HV: Add in-guest debug support
  - Book3S HV: Preload cache lines on context switch
  - Remove 440 support

Alexander Graf (31):
      KVM: PPC: Book3s PR: Disable AIL mode with OPAL
      KVM: PPC: Book3s HV: Fix tlbie compile error
      KVM: PPC: Book3S PR: Handle hyp doorbell exits
      KVM: PPC: Book3S PR: Fix ABIv2 on LE
      KVM: PPC: Book3S PR: Fix sparse endian checks
      PPC: Add asm helpers for BE 32bit load/store
      KVM: PPC: Book3S HV: Make HTAB code LE host aware
      KVM: PPC: Book3S HV: Access guest VPA in BE
      KVM: PPC: Book3S HV: Access host lppaca and shadow slb in BE
      KVM: PPC: Book3S HV: Access XICS in BE
      KVM: PPC: Book3S HV: Fix ABIv2 on LE
      KVM: PPC: Book3S HV: Enable for little endian hosts
      KVM: PPC: Book3S: Move vcore definition to end of kvm_arch struct
      KVM: PPC: Deflect page write faults properly in kvmppc_st
      KVM: PPC: Book3S: Stop PTE lookup on write errors
      KVM: PPC: Book3S: Add hack for split real mode
      KVM: PPC: Book3S: Make magic page properly 4k mappable
      KVM: PPC: Remove 440 support
      KVM: Rename and add argument to check_extension
      KVM: Allow KVM_CHECK_EXTENSION on the vm fd
      KVM: PPC: Book3S: Provide different CAPs based on HV or PR mode
      KVM: PPC: Implement kvmppc_xlate for all targets
      KVM: PPC: Move kvmppc_ld/st to common code
      KVM: PPC: Remove kvmppc_bad_hva()
      KVM: PPC: Use kvm_read_guest in kvmppc_ld
      KVM: PPC: Handle magic page in kvmppc_ld/st
      KVM: PPC: Separate loadstore emulation from priv emulation
      KVM: PPC: Expose helper functions for data/inst faults
      KVM: PPC: Remove DCR handling
      KVM: PPC: HV: Remove generic instruction emulation
      KVM: PPC: PR: Handle FSCR feature deselects

Alexey Kardashevskiy (1):
      KVM: PPC: Book3S: Fix LPCR one_reg interface

Aneesh Kumar K.V (4):
      KVM: PPC: BOOK3S: PR: Fix PURR and SPURR emulation
      KVM: PPC: BOOK3S: PR: Emulate virtual timebase register
      KVM: PPC: BOOK3S: PR: Emulate instruction counter
      KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page

Anton Blanchard (2):
      KVM: PPC: Book3S HV: Fix ABIv2 indirect branch issue
      KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC()

Bharat Bhushan (10):
      kvm: ppc: bookehv: Added wrapper macros for shadow registers
      kvm: ppc: booke: Use the shared struct helpers of SRR0 and SRR1
      kvm: ppc: booke: Use the shared struct helpers of SPRN_DEAR
      kvm: ppc: booke: Add shared struct helpers of SPRN_ESR
      kvm: ppc: booke: Use the shared struct helpers for SPRN_SPRG0-7
      kvm: ppc: Add SPRN_EPR get helper function
      kvm: ppc: bookehv: Save restore SPRN_SPRG9 on guest entry exit
      KVM: PPC: Booke-hv: Add one reg interface for SPRG9
      KVM: PPC: Remove comment saying SPRG1 is used for vcpu pointer
      KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr

Michael Neuling (1):
      KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling

Mihai Caraman (8):
      KVM: PPC: e500mc: Enhance tlb invalidation condition on vcpu schedule
      KVM: PPC: e500: Fix default tlb for victim hint
      KVM: PPC: e500: Emulate power management control SPR
      KVM: PPC: e500mc: Revert "add load inst fixup"
      KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1
      KVM: PPC: Book3s: Remove kvmppc_read_inst() function
      KVM: PPC: Allow kvmppc_get_last_inst() to fail
      KVM: PPC: Bookehv: Get vcpu's last instruction for emulation

Paul Mackerras (4):
      KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling
      KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled
      KVM: PPC: Book3S PR: Take SRCU read lock around RTAS kvm_read_guest() call
      KVM: PPC: Book3S: Make kvmppc_ld return a more accurate error indication

Stewart Smith (2):
      Split out struct kvmppc_vcore creation to separate function
      Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8

Conflicts:
	Documentation/virtual/kvm/api.txt
2014-08-05 09:58:11 +02:00
Alexander Graf b2677b8dd8 KVM: PPC: Remove 440 support
The 440 target hasn't been properly functioning for a few releases and
before I was the only one who fixes a very serious bug that indicates to
me that nobody used it before either.

Furthermore KVM on 440 is slow to the extent of unusable.

We don't have to carry along completely unused code. Remove 440 and give
us one less thing to worry about.

Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-28 15:23:15 +02:00
Michael Ellerman e2500be2b8 powerpc/powernv: Remove OPAL v1 takeover
In commit 27f4488872 "Add OPAL takeover from PowerVM" we added support
for "takeover" on OPAL v1 machines.

This was a mode of operation where we would boot under pHyp, and query
for the presence of OPAL. If detected we would then do a special
sequence to take over the machine, and the kernel would end up running
in hypervisor mode.

OPAL v1 was never a supported product, and was never shipped outside
IBM. As far as we know no one is still using it.

Newer versions of OPAL do not use the takeover mechanism. Although the
query for OPAL should be harmless on machines with newer OPAL, we have
seen a machine where it causes a crash in Open Firmware.

The code in early_init_devtree() to copy boot_command_line into cmd_line
was added in commit 817c21ad9a "Get kernel command line accross OPAL
takeover", and AFAIK is only used by takeover, so should also be
removed.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-25 13:10:47 +10:00
Michael Ellerman fb5a515704 powerpc: Remove platforms/wsp and associated pieces
__attribute__ ((unused))

WSP is the last user of CONFIG_PPC_A2, so we remove that as well.

Although CONFIG_PPC_ICSWX still exists, it's no longer selectable for
any Book3E platform, so we can remove the code in mmu-book3e.h that
depended on it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11 16:35:38 +10:00
Linus Torvalds e61aca5158 Merge branch 'kconfig-diet' from Dave Hansen
Merge Kconfig menu diet patches from Dave Hansen:
 "I think the "Kernel Hacking" menu has gotten a bit out of hand.  It is
  over 120 lines long on my system with everything enabled and options
  are scattered around it haphazardly.

        http://sr71.net/~dave/linux/kconfig-horror.png

  Let's try to introduce some sanity.  This set takes that 120 lines
  down to 55 and makes it vastly easier to find some things.  It's a
  start.

  This set stands on its own, but there is plenty of room for follow-up
  patches.  The arch-specific debug options still end up getting stuck
  in the top-level "kernel hacking" menu.  OPTIMIZE_INLINING, for
  instance, could obviously go in to the "compiler options" menu, but
  the fact that it is defined in arch/ in a separate Kconfig file keeps
  it on its own for the moment.

  The Signed-off-by's in here look funky.  I changed employers while
  working on this set, so I have signoffs from both email addresses"

* emailed patches from Dave Hansen <dave@sr71.net>:
  hang and lockup detection menu
  kconfig: consolidate printk options
  group locking debugging options
  consolidate compilation option configs
  consolidate runtime testing configs
  order memory debugging Kconfig options
  consolidate per-arch stack overflow debugging options
2013-07-04 11:25:51 -07:00
Dave Hansen d1a1dc0be8 consolidate per-arch stack overflow debugging options
Original posting:

	http://lkml.kernel.org/r/20121214184202.F54094D9@kernel.stglabs.ibm.com

Several architectures have similar stack debugging config options.
They all pretty much do the same thing, some with slightly
differing help text.

This patch changes the architectures to instead enable a Kconfig
boolean, and then use that boolean in the generic Kconfig.debug
to present the actual menu option.  This removes a bunch of
duplication and adds consistency across arches.

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile]
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 11:25:39 -07:00
Alistair Popple 071df9422a powerpc: Add a configuration option for early BootX/OpenFirmware debug
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 16:55:12 +10:00
Alistair Popple 30650239ad powerpc: Add an in memory udbg console
This patch adds a new udbg early debug console which utilises
statically defined input and output buffers stored within the kernel
BSS. It is primarily designed to assist with bring up of new hardware
which may not have a working console but which has a method of
reading/writing kernel memory.

This version incorporates comments made by Ben H (thanks!).

Changes from v1:
	- Add memory barriers.
	- Ensure updating of read/write positions is atomic.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-08 06:36:49 +10:00
Anton Blanchard d6b9a81b2a powerpc: IOMMU fault injection
Add the ability to inject IOMMU faults. We enable this per device
via a fail_iommu sysfs property, similar to fault injection on other
subsystems.

An example:

...
0003:01:00.1 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 02)

To inject one error to this device:

echo 1 > /sys/bus/pci/devices/0003:01:00.1/fail_iommu
echo 1 > /sys/kernel/debug/fail_iommu/probability
echo 1 > /sys/kernel/debug/fail_iommu/times

As feared, the first failure injected on the be3 results in an
unrecoverable error, taking down both functions of the card
permanently:

be2net 0003:01:00.1: Unrecoverable error in the card

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-10 19:18:59 +10:00
Grant Likely 092b2fb076 irqdomain: Remove powerpc dependency from debugfs file
The debugfs code is really generic for all platforms.  This patch removes the
powerpc-specific directory reference and makes it available to all
architectures.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-29 14:31:02 -06:00
Stephen Rothwell 3d066d77cf powerpc: remove CONFIG_PPC_ISERIES from the architecture Kconfig files
After this, we can remove the legacy iSeries code more easily.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-27 11:33:58 +11:00
sukadev@linux.vnet.ibm.com 1d54cf2b97 powerpc: Implement CONFIG_STRICT_DEVMEM
As described in the help text in the patch, this token restricts general
access to /dev/mem as a way of increasing the security. Specifically, access
to exclusive IOMEM and kernel RAM is denied unless CONFIG_STRICT_DEVMEM is
set to 'n'.

Implement the 'devmem_is_allowed()' interface for Powerpc. It will be
called from range_is_allowed() when userpsace attempts to access /dev/mem.

This patch is based on an earlier patch from Steve Best and with input from
Paul Mackerras and Scott Wood.

[BenH] Fixed a typo or two and removed the generic change which should
       be submitted as a separate patch

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-28 11:42:08 +11:00
Benjamin Herrenschmidt daea1175a9 powerpc/powernv: Support for OPAL console
This adds a udbg and an hvc console backend for supporting a console
using the OPAL console interfaces.

On OPAL v1 we have hvc0 mapped to whatever console the system was
configured for (network or hvsi serial port) via the service
processor.

On OPAL v2 we have hvcN mapped to the Nth console provided by OPAL
which generally corresponds to:

	hvc0 : network console (raw protocol)
	hvc1 : serial port S1 (hvsi)
	hvc2 : serial port S2 (hvsi)

Note: At this point, early debug console only works with OPAL v1
and shouldn't be enabled in a normal kernel.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 16:09:54 +10:00
Benjamin Herrenschmidt b8bb922c68 powerpc/udbg: Fix Kconfig entry for avoiding 44x early debug with KVM
It was preventing the global early debug selection whenever KVM was enabled
instead of only preventing the 440 specific one.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:24 +10:00
Hector Martin c26afe9e85 powerpc/ps3: Add gelic udbg driver
Add a new udbg driver for the PS3 gelic Ehthernet device.

This driver shares only a few stucture and constant definitions with the
gelic Ethernet device driver, so is implemented as a stand-alone driver
with no dependencies on the gelic Ethernet device driver.

Signed-off-by: Hector Martin <hector@marcansoft.com>
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:20:05 +10:00
Benjamin Herrenschmidt 4d2bb3f500 powerpc/pseries: Re-implement HVSI as part of hvc_vio
On pseries machines, consoles are provided by the hypervisor using
a low level get_chars/put_chars type interface. However, this is
really just a transport to the service processor which implements
them either as "raw" console (networked consoles, HMC, ...) or as
"hvsi" serial ports.

The later is a simple packet protocol on top of the raw character
interface that is supposed to convey additional "serial port" style
semantics. In practice however, all it does is provide a way to
read the CD line and set/clear our DTR line, that's it.

We currently implement the "raw" protocol as an hvc console backend
(/dev/hvcN) and the "hvsi" protocol using a separate tty driver
(/dev/hvsi0).

However this is quite impractical. The arbitrary difference between
the two type of devices has been a major source of user (and distro)
confusion. Additionally, there's an additional mini -hvsi implementation
in the pseries platform code for our low level debug console and early
boot kernel messages, which means code duplication, though that low
level variant is impractical as it's incapable of doing the initial
protocol negociation to establish the link to the FSP.

This essentially replaces the dedicated hvsi driver and the platform
udbg code completely by extending the existing hvc_vio backend used
in "raw" mode so that:

 - It now supports HVSI as well
 - We add support for hvc backend providing tiocm{get,set}
 - It also provides a udbg interface for early debug and boot console

This is overall less code, though this will only be obvious once we
remove the old "hvsi" driver, which is still available for now. When
the old driver is enabled, the new code still kicks in for the low
level udbg console, replacing the old mini implementation in the platform
code, it just doesn't provide the higher level "hvc" interface.

In addition to producing generally simler code, this has several benefits
over our current situation:

 - The user/distro only has to deal with /dev/hvcN for the hypervisor
console, avoiding all sort of confusion that has plagued us in the past

 - The tty, kernel and low level debug console all use the same code
base which supports the full protocol establishment process, thus the
console is now available much earlier than it used to be with the
old HVSI driver. The kernel console works much earlier and udbg is
available much earlier too. Hackers can enable a hard coded very-early
debug console as well that works with HVSI (previously that was only
supported for the "raw" mode).

I've tried to keep the same semantics as hvsi relative to how I react
to things like CD changes, with some subtle differences though:

 - I clear DTR on close if HUPCL is set

 - Current hvsi triggers a hangup if it detects a up->down transition
   on CD (you can still open a console with CD down). My new implementation
   triggers a hangup if the link to the FSP is severed, and severs it upon
   detecting a up->down transition on CD.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29 17:48:35 +10:00
Stephen Boyd 5ca43f6c3b lib: consolidate DEBUG_STACK_USAGE option
Most arches define CONFIG_DEBUG_STACK_USAGE exactly the same way.  Move it
to lib/Kconfig.debug so each arch doesn't have to define it.  This
obviously makes the option generic, but that's fine because the config is
already used in generic code.

It's not obvious to me that sysrq-P actually does anything caution by
keeping the most inclusive wording.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:54 -07:00
Stephen Boyd 44ec7abe35 lib: consolidate DEBUG_PER_CPU_MAPS
DEBUG_PER_CPU_MAPS is used in lib/cpumask.c as well as in
inlcude/linux/cpumask.h and thus it has outgrown its use within x86 and
powerpc alone.  Any arch with SMP support may want to get some more
debugging, so make this option generic.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:53 -07:00
Jack Miller a0496d450a powerpc: Add early debug for WSP platforms
Signed-off-by: Jack Miller <jack@codezen.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-06 13:32:41 +10:00
Christoph Hellwig f1ba9a5b2a powerpc: Unconditionally enabled irq stacks
Irq stacks provide an essential protection from stack overflows through
external interrupts, at the cost of two additionals stacks per CPU.

Enable them unconditionally to simplify the kernel build and prevent
people from accidentally disabling them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-15 15:02:37 +10:00
Anton Blanchard ceba1abcb0 powerpc/cpumask: Add DEBUG_PER_CPU_MAPS option
Enable the DEBUG_PER_CPU_MAPS option so we can look for problems with
cpumasks .

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06 18:05:26 +10:00
Linus Torvalds a73611b6aa Merge branch 'next' of git://git.secretlab.ca/git/linux-2.6
* 'next' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
  powerpc: fix up for mmu_mapin_ram api change
  powerpc: wii: allow ioremap within the memory hole
  powerpc: allow ioremap within reserved memory regions
  wii: use both mem1 and mem2 as ram
  wii: bootwrapper: add fixup to calc useable mem2
  powerpc: gamecube/wii: early debugging using usbgecko
  powerpc: reserve fixmap entries for early debug
  powerpc: wii: default config
  powerpc: wii: platform support
  powerpc: wii: hollywood interrupt controller support
  powerpc: broadway processor support
  powerpc: wii: bootwrapper bits
  powerpc: wii: device tree
  powerpc: gamecube: default config
  powerpc: gamecube: platform support
  powerpc: gamecube/wii: flipper interrupt controller support
  powerpc: gamecube/wii: udbg support for usbgecko
  powerpc: gamecube/wii: do not include PCI support
  powerpc: gamecube/wii: declare as non-coherent platforms
  powerpc: gamecube/wii: introduce GAMECUBE_COMMON
  ...

Fix up conflicts in arch/powerpc/mm/fsl_booke_mmu.c.

Hopefully even close to correctly.
2009-12-16 13:26:53 -08:00
Albert Herranz d1d56f8c1d powerpc: gamecube/wii: early debugging using usbgecko
Add support for using the USB Gecko adapter as an early debugging
console on the Nintendo GameCube and Wii video game consoles.
The USB Gecko is a 3rd party memory card interface adapter that provides
a EXI (External Interface) to USB serial converter.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 22:24:31 -07:00
Anton Blanchard c8cd093a6e powerpc: tracing: Add hypervisor call tracepoints
Add hcall_entry and hcall_exit tracepoints.  This replaces the inline
assembly HCALL_STATS code and converts it to use the new tracepoints.

To keep the disabled case as quick as possible, we embed a status word
in the TOC so we can get at it with a single load.  By doing so we
keep the overhead at a minimum.  Time taken for a null hcall:

No tracepoint code:	135.79 cycles
Disabled tracepoints:	137.95 cycles

For reference, before this patch enabling HCALL_STATS resulted in a null
hcall of 201.44 cycles!

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28 16:13:04 +11:00
Michael Ellerman ba55bd7436 powerpc: Add configurable -Werror for arch/powerpc
Add the option to build the code under arch/powerpc with -Werror.

The intention is to make it harder for people to inadvertantly introduce
warnings in the arch/powerpc code. It needs to be configurable so that
if a warning is introduced, people can easily work around it while it's
being fixed.

The option is a negative, ie. don't enable -Werror, so that it will be
turned on for allyes and allmodconfig builds.

The default is n, in the hope that developers will build with -Werror,
that will probably lead to some build breaks, I am prepared to be flamed.

It's not enabled for math-emu, which is a steaming pile of warnings.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16 14:15:45 +10:00
Geert Uytterhoeven 80947e7c99 powerpc: Keep track of emulated instructions
If CONFIG_PPC_EMULATED_STATS is enabled, make available counters for the
various classes of emulated instructions under
/sys/kernel/debug/powerpc/emulated_instructions/ (assumed debugfs is mounted on
/sys/kernel/debug).  Optionally (controlled by
/sys/kernel/debug/powerpc/emulated_instructions/do_warn), rate-limited warnings
can be printed to the console when instructions are emulated.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:26 +10:00
Akinobu Mita ee3b4290ae generic debug pagealloc: build fix
This fixes a build failure with generic debug pagealloc:

  mm/debug-pagealloc.c: In function 'set_page_poison':
  mm/debug-pagealloc.c:8: error: 'struct page' has no member named 'debug_flags'
  mm/debug-pagealloc.c: In function 'clear_page_poison':
  mm/debug-pagealloc.c:13: error: 'struct page' has no member named 'debug_flags'
  mm/debug-pagealloc.c: In function 'page_poison':
  mm/debug-pagealloc.c:18: error: 'struct page' has no member named 'debug_flags'
  mm/debug-pagealloc.c: At top level:
  mm/debug-pagealloc.c:120: error: redefinition of 'kernel_map_pages'
  include/linux/mm.h:1278: error: previous definition of 'kernel_map_pages' was here
  mm/debug-pagealloc.c: In function 'kernel_map_pages':
  mm/debug-pagealloc.c:122: error: 'debug_pagealloc_enabled' undeclared (first use in this function)

by fixing

 - debug_flags should be in struct page
 - define DEBUG_PAGEALLOC config option for all architectures

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:48 -07:00
Akinobu Mita 6a11f75b6a generic debug pagealloc
CONFIG_DEBUG_PAGEALLOC is now supported by x86, powerpc, sparc64, and
s390.  This patch implements it for the rest of the architectures by
filling the pages with poison byte patterns after free_pages() and
verifying the poison patterns before alloc_pages().

This generic one cannot detect invalid page accesses immediately but
invalid read access may cause invalid dereference by poisoned memory and
invalid write access can be detected after a long delay.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:13 -07:00
Benjamin Herrenschmidt 28794d34ec powerpc/kconfig: Kill PPC_MULTIPLATFORM
CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't
really meaningful anymore. It was basically equivalent to PPC64 || 6xx.

This removes it along with the following changes:

 - 32-bit platforms that relied on PPC32 && PPC_MULTIPLATFORM now rely
   on 6xx which is what they want anyway.

 - A new symbol, PPC_BOOK3S, is defined that represent compliance with
   the "Server" variant of the architecture. This is set when either 6xx
   or PPC64 is set and open the door for future BOOK3E 64-bit.

 - 64-bit platforms that relied on PPC64 && PPC_MULTIPLATFORM now use
   PPC64 && PPC_BOOK3S

 - A separate and selectable CONFIG_PPC_OF_BOOT_TRAMPOLINE option is now
   used to control the use of prom_init.c

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:35 +11:00
Johannes Berg c4d04be11f powerpc: Allow the max stack trace depth to be configured
On my screen, when something crashes, I only have space for maybe 16
functions of the stack trace before the information above it scrolls
off the screen.  It's easy to hack the kernel to print out only that
much, but it's harder to remember to do it.  This introduces a config
option for it so that I can keep the setting in my config.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03 20:46:35 +11:00
Michael Ellerman 7e302869e0 powerpc: Split-out common MSI bitmap logic into msi_bitmap.c
There are now two almost identical implementations of an MSI bitmap
allocator, one in mpic_msi.c and the other in fsl_msi.c.

Merge them together and put the result in msi_bitmap.c.  Some of the
MPIC bits will remain to provide a nicer interface for the MPIC users.

In the process we fix two buglets.  The first is that the allocation
routines, now msi_bitmap_alloc_hwirqs(), returned an unsigned result,
even though they use -1 to indicate allocation failure.  Although all
the callers were checking correctly, it is much better for the routine
to just return an int.  At least until someone wants > ~2 billion MSIs.

The second buglet is that the device tree reservation logic only
allowed power-of-two reservations.  AFAICT that didn't effect any
existing code but it's nicer if we can reserve arbitrary irqs from MSI
use.

We also add some selftests, which exposed the two buglets and now test
for them, as well as some basic sanity tests.  The tests are only built
when CONFIG_DEBUG_KERNEL=y.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-20 16:34:57 +10:00
Kumar Gala 9c4cb82515 powerpc: Remove use of CONFIG_PPC_MERGE
Now that arch/ppc is gone and CONFIG_PPC_MERGE is always set, remove
the dead code associated with !CONFIG_PPC_MERGE from arch/powerpc
and include/asm-powerpc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-04 13:18:17 +10:00
Jason Wessel 17ce452f7e kgdb, powerpc: arch specific powerpc kgdb support
This patch removes the old kgdb reminants from ARCH=powerpc and
implements the new style arch specific stub for the common kgdb core
interface.

It is possible to have xmon and kgdb in the same kernel, but you
cannot use both at the same time because there is only one set of
debug hooks.

The arch specific kgdb implementation saves the previous state of the
debug hooks and restores them if you unconfigure the kgdb I/O driver.
Kgdb should have no impact on a kernel that has no kgdb I/O driver
configured.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-07-23 11:30:15 -05:00
Michael Ellerman 362e7701fd powerpc: Add self-tests of the feature fixup code
This commit adds tests of the feature fixup code, they are run during
boot if CONFIG_FTR_FIXUP_SELFTEST=y. Some of the tests manually invoke
the patching routines to check their behaviour, and others use the
macros and so are patched during the normal patching done during boot.

Because we have two sets of macros with different names, we use a macro
to generate the test of the macros, very niiiice.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01 11:28:30 +10:00
Michael Ellerman ae0dc73625 powerpc: Add tests of the code patching routines
Add tests of the existing code patching routines, as well as the new
routines added in the last commit.  The self-tests are run late in boot
when CONFIG_CODE_PATCHING_SELFTEST=y, which depends on DEBUG_KERNEL=y.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01 11:28:22 +10:00
Kumar Gala 85218827cc [POWERPC] Add IRQSTACKS support on ppc32
This makes it possible to use separate stacks for hard and soft IRQs
on 32-bit powerpc as well as on 64-bit.  The code for 32-bit is just
the 32-bit analog of the 64-bit code.

* Added allocation and initialization of the irq stacks.  We limit the
  stacks to be in lowmem for ppc32.
* Implemented ppc32 versions of call_do_softirq() and call_handle_irq()
  to switch the stack pointers
* Reworked how we do stack overflow detection.  We now keep around the
  limit of the stack in the thread_struct and compare against the limit
  to see if we've overflowed.  We can now use this on ppc64 if desired.

[ paulus@samba.org: Fixed bug on 6xx where we need to reload r9 with the
  thread_info pointer. ]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 15:57:34 +10:00
Hollis Blanchard bbf45ba57e KVM: ppc: PowerPC 440 KVM implementation
This functionality is definitely experimental, but is capable of running
unmodified PowerPC 440 Linux kernels as guests on a PowerPC 440 host. (Only
tested with 440EP "Bamboo" guests so far, but with appropriate userspace
support other SoC/board combinations should work.)

See Documentation/powerpc/kvm_440.txt for technical details.

[stephen: build fix]

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 18:21:39 +03:00
Laurent Pinchart c2dd3529f3 [POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.
This patch relocates the buffer descriptors and the SMC parameter RAM at the
end of the first CPM muram chunk, as described in the device tree. This allows
device trees to stop excluding SMC parameter ram allocated by the boot loader
from the CPM muram node.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:37 -05:00
Hugh Blemings 6bbc547629 [POWERPC] 4xx: Base support for 440GX Taishan eval board
This patch adds base support for the AMCC Taishan 440GX evaluation
board.

Signed-off-by: Hugh Blemings <hugh@blemings.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:13:33 -06:00
Benjamin Herrenschmidt 9dae8afdf2 [POWERPC] 4xx: Add early udbg support for 40x processors
This adds some basic real mode based early udbg support for 40x
in order to debug things more easily

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:13:03 -06:00
Benjamin Herrenschmidt 7ee17466b6 [POWERPC] Early debug forces console log level to max
This makes the early debug option force the console loglevel
to the max.  The early debug option is meant to catch messages very
early in the kernel boot process, in many cases, before the kernel
has a chance to parse the "debug" command line argument.  Thus it
makes sense when CONFIG_PPC_EARLY_DEBUG is set, to force the console
log level to the max at boot time.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 15:43:35 +11:00
Valentine Barshak 1d5499b5ac [POWERPC] 4xx: Split early debug output and early boot console for 44x
Currently there's no way to enable early boot console on PowerPC 44x
not specifying uart's physical address in kernel config, which is used
for very early debug messages. This patch splits very early debug output
(which needs uart physical address in kernel config) and early boot console
(which searches for uarts in the device tree using find_legacy_serial_ports).
We enable early boot console for all 44x processors, while (dangerous)
early debug is user-selectable.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-19 16:18:18 -05:00
Adrian Bunk 247537b9a2 kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"
Remove the following redundant and never or rarely used kconfig syntax:

- "def_boolean" (same as "def_bool")
- "requires" (same as "depends on")
- "depends" (same as "depends on")

This patch contains the code changes and Kconfig updates.
The shipped files are in next patch to let actual codechange stand out.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Scott Wood 15f8c604a7 [POWERPC] cpm: Describe multi-user ram in its own device node.
The way the current CPM binding describes available multi-user (a.k.a.
dual-ported) RAM doesn't work well when there are multiple free regions,
and it doesn't work at all if the region doesn't begin at the start of
the muram area (as the hardware needs to be programmed with offsets into
this area).  The latter situation can happen with SMC UARTs on CPM2, as its
parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't
support moving it.

It is now described with a muram node, similar to QE.  The current CPM
binding is sufficiently recent (i.e. never appeared in an official release)
that compatibility with existing device trees is not an issue.

The code supporting the new binding is shared between cpm1 and cpm2, rather
than remain separated.  QE should be able to use this code as well, once
minor fixes are made to its device trees.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 15:47:05 -05:00
Scott Wood c374e00e17 [POWERPC] Add early debug console for CPM serial ports.
This code assumes that the ports have been previously set up, with
buffers in DPRAM.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:35:43 -05:00
Michael Ellerman 60b332e755 [POWERPC] Export virq mapping via debugfs
This adds a debugfs file "powerpc/virq_mapping", which shows the virtual
to real mapping of irq numbers.  Enable it with CONFIG_VIRQ_DEBUG.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Chen Gong <G.Chen@freescale.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:20 +10:00
Rafael J. Wysocki b0cb1a19d0 Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid
confusion (among other things, with CONFIG_SUSPEND introduced in the
next patch).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 16:45:38 -07:00
Kumar Gala d1c813123f [POWERPC] Only allow building of BootX text support on PPC_MULTIPLATFORM
BootX text code is only supported on systems with real OF at this point
which is PPC_OF && PPC_MULTIPLATFORM.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26 00:43:36 -05:00
David Sterba 3dde6ad8fc Fix trivial typos in Kconfig* files
Fix several typos in help text in Kconfig* files.

Signed-off-by: David Sterba <dave@jikos.cz>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 07:12:20 +02:00
David Gibson d9b55a0361 [POWERPC] Early serial debug support for PPC44x
This adds support for early serial debugging via the built in
port on IBM/AMCC PowerPC 44x CPUs.  It uses a bolted TLB entry in
address space 1 for the UART's mapping, allowing robust debugging both
before and after the initialization of the MMU.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 14:47:33 +10:00