Граф коммитов

1393 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 5b3b5921ba Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal management fixes from Eduardo Valentin:
 "Specifics:

   - adding Lukasz as maintainer of samsung thermal driver.
   - driver fixes: exynos and int430x.
   - one fix in the exynos cpufreq driver related to cpu cooling (acked
     by cpufreq maintainer).
   - fix default sysfs attributes of cooling devices

  Note: I am sending this pull on Rui's behalf while he fixes issues in his Linux box"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: Make sysfs attributes of cooling devices default attributes
  Thermal/int340x: Fix memleak for aux trip
  MAINTAINERS: Add entry for SAMSUNG THERMAL DRIVER
  cpufreq: exynos: Use simple approach to asses if cpu cooling can be used
  thermal: exynos: Fix wrong control of power down detection mode for Exynos7
2015-03-06 13:43:33 -08:00
Geert Uytterhoeven 5877b4f467 cpufreq: ppc: Add missing #include <asm/smp.h>
If CONFIG_SMP=n, <linux/smp.h> does not include <asm/smp.h>, causing:

drivers/cpufreq/ppc-corenet-cpufreq.c: In function 'corenet_cpufreq_cpu_init':
drivers/cpufreq/ppc-corenet-cpufreq.c:173:3: error: implicit declaration of function 'get_hard_smp_processor_id' [-Werror=implicit-function-declaration]

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-04 14:14:54 +01:00
Lukasz Majewski 0fc83929d0 cpufreq: exynos: Use simple approach to asses if cpu cooling can be used
Commit: e725d26c48 provided possibility to
use device tree to asses if cpu can be used as cooling device. Since the
code was somewhat awkward, simpler approach has been proposed.

Test HW: Exynos 4412 - Odroid U3.

Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2015-03-02 10:04:52 +01:00
Linus Torvalds cd50b70ccd Additional power management and ACPI updates for v3.20-rc1
- Revert a recent ACPI LPSS driver commit that prevented the touchpad
    driver from loading on Dell XPS13 (Jarkko Nikula).
 
  - Make the ACPI LPSS driver disable the I2C controllers and deassert
    SPI host controllers resets at startup on Intel BayTrail and Braswell
    SoCs in case they have been left in wrong states by the platform
    firmware which then may casuse fatal controller driver failures during
    resume from hibernation (Mika Westerberg).
 
  - Make two recently added ACPI EC messages look better (Scot Doyle).
 
  - Reduce the printk level of a recently added debug message related to
    ACPI resources that may become noisy in some cases (Rafael J Wysocki).
 
  - Add a new ACPI backlight blacklist entry for Samsung Series 9
    (900X3C/900X3D/900X3E/900X4C/900X4D) laptops where the native backlight
    interface doesn't work while the ACPI based one does (Jens Reyer).
 
  - Make the PNP sybsystem's core code use __request_region() followed by
    __release_region() instead of __check_region() which then will allow
    us to get rid of the latter as it has no more users (Jakub Sitnicki).
 
  - Fix a build breakage and an issue with two __init functions that may be
    called after initialization in the s3c cpufreq driver (Arnd Bergmann).
 
  - Make the powernv cpuidle driver read target_residency values for idle
    states from a Device Tree (as we have the suitable DT bindings for that
    now) and improve the parsing of the powermgmt DT node in that driver
    (Preeti U Murthy).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJU6Ak8AAoJEILEb/54YlRx1IIP/3AJFuLlgQ15rFAMV5c1Wel8
 RhyD0JcucgtGu9bLoFj2wMpy/FDv+zpqp4vF5qrgcY3OcKoBYvM18HzDbFyiThqo
 4aTZEeuv14ipstBqPwt8aABAjWZ9elEb0h3zuEgekoc9UUpMYzHhSUaKbWzNHfd9
 Uba6+aS1haE9zWeVJw+30uWFy42SLgbu1qDWizq/Lg+jUMRJvNsPsDzeTF4mP5Vs
 aF4BD0Fo9X2spnSYK16dHq08lQ7UzkHCAj9aY8KCHVIWwOOMjM7/kpa0TRNNqIm0
 7UIH+ZwX8gGBJ2WQ1vQXESI0veJdH5B+xXtsaxXz+5VEWBI9sf4QjM7bti+HaGSw
 wgB5bgV3gV9T9uNbmwTCBkC9qRt+6cvqxLvH+z85l/U2cDMr0UqP4YlStqupfWOW
 fXTUsL7pmy9tKtzeaKzoBxKooRSMZg/GmscHtHlb4Ps+Vu/3vHsw7fJ3cOylvcT1
 3IFtTt2JWicKWr3zcDtcqRBSgCLwUgLS8Zh25O7UT9WfNjo897Rccdta1jWvZppQ
 SLZxBB+SZGWe8s/RucwmYEB4+gKP8dNIPFIuVTK6RkMAnL4Iv13cNR/1X1GyaLpF
 exvs9i0/bIYVDfRXlVaS3RRSDKKZkNJdddQUD27PrCKRffOezjzBV+gohadXFbbn
 tkou9vHrphL0Zql/y6Iw
 =us59
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.20-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull one more batch of power management and ACPI updates from Rafael Wysocki:
 "These are mostly fixes on top of the previously merged recent PM and
  ACPI material.

  First, one commit that broke the ACPI LPSS (Low-Power Subsystem)
  driver on a Dell box is reverted and there are two stable-candidate
  fixes for that driver.  Another fix cleans up two recently added ACPI
  EC messages that look odd and the printk level of a noisy debug
  message in the core ACPI resources handling code is reduced.

  In addition to that we have two stable-candidate fixes for the s3c
  cpufreq driver, two cpuidle powernv driver updates related to Device
  Trees and a PNP subsystem cleanup that will allow us to get rid of
  some old ugliness going forward.  Also there is a new blacklist entry
  for the ACPI backlight code.

  Specifics:

   - Revert a recent ACPI LPSS driver commit that prevented the touchpad
     driver from loading on Dell XPS13 (Jarkko Nikula).

   - Make the ACPI LPSS driver disable the I2C controllers and deassert
     SPI host controllers resets at startup on Intel BayTrail and
     Braswell SoCs in case they have been left in wrong states by the
     platform firmware which then may casuse fatal controller driver
     failures during resume from hibernation (Mika Westerberg).

   - Make two recently added ACPI EC messages look better (Scot Doyle).

   - Reduce the printk level of a recently added debug message related
     to ACPI resources that may become noisy in some cases (Rafael J
     Wysocki).

   - Add a new ACPI backlight blacklist entry for Samsung Series 9
     (900X3C/900X3D/900X3E/900X4C/900X4D) laptops where the native
     backlight interface doesn't work while the ACPI based one does
     (Jens Reyer).

   - Make the PNP sybsystem's core code use __request_region() followed
     by __release_region() instead of __check_region() which then will
     allow us to get rid of the latter as it has no more users (Jakub
     Sitnicki).

   - Fix a build breakage and an issue with two __init functions that
     may be called after initialization in the s3c cpufreq driver (Arnd
     Bergmann).

   - Make the powernv cpuidle driver read target_residency values for
     idle states from a Device Tree (as we have the suitable DT bindings
     for that now) and improve the parsing of the powermgmt DT node in
     that driver (Preeti U Murthy)"

* tag 'pm+acpi-3.20-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: powernv: Avoid endianness conversions while parsing DT
  cpufreq: s3c: remove last use of resume_clocks callback
  cpufreq: s3c: remove incorrect __init annotations
  ACPI / LPSS: Deassert resets for SPI host controllers on Braswell
  ACPI / LPSS: Always disable I2C host controllers
  ACPI / resources: Change pr_info() to pr_debug() for debug information
  ACPI / video: Disable native backlight on Samsung Series 9 laptops
  cpuidle: powernv: Read target_residency value of idle states from DT if available
  Revert "ACPI / LPSS: Remove non-existing clock control from Intel Lynxpoint I2C"
  ACPI / EC: Remove non-standard log emphasis
  PNP: Switch from __check_region() to __request_region()
2015-02-21 13:40:41 -08:00
Linus Torvalds 18a8d49973 The clock framework changes for 3.20 contain the usual driver additions,
enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based
 devices. Additionaly the framework core underwent a bit of surgery with
 two major changes. The boundary between the clock core and clock
 providers (e.g clock drivers) is now more well defined with dedicated
 provider helper functions. struct clk no longer maps 1:1 with the
 hardware clock but is a true per-user cookie which helps us tracker
 users of hardware clocks and debug bad behavior. The second major change
 is the addition of rate constraints for clocks. Rate ranges are now
 supported which are analogous to the voltage ranges in the regulator
 framework. Unfortunately these changes to the core created some
 breakeage. We think we fixed it all up but for this reason there are
 lots of last minute commits trying to undo the damage.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU54D5AAoJEDqPOy9afJhJs6AQAK5YuUwjDchdpNZx9p7OnT1q
 +poehuUwE/gYjmdACqYFyaPrI/9f43iNCfFAgKGLQqmB5ZK4sm4ktzfBEhjWINR2
 iiCx9QYMQVGiKwC8KU0ddeBciglE2b/DwxB45m9TsJEjowucUeBzwLEIj5DsGxf7
 teXRoOWgXdz1MkQJ4pnA09Q3qEPQgmu8prhMfka/v75/yn7nb9VWiJ6seR2GqTKY
 sIKL9WbKjN4AzctggdqHnMSIqZoq6vew850bv2C1fPn7GiYFQfWW+jvMlVY40dp8
 nNa2ixSQSIXVw4fCtZhTIZcIvZ8puc7WVLcl8fz3mUe3VJn1VaGs0E+Yd3GexpIV
 7bwkTOIdS8gSRlsUaIPiMnUob5TUMmMqjF4KIh/AhP4dYrmVbU7Ie8ccvSxe31Ku
 lK7ww6BFv3KweTnW/58856ZXDlXLC6x3KT+Fw58L23VhPToFgYOdTxn8AVtE/LKP
 YR3UnY9BqFx6WHXVoNvg3Piyej7RH8fYmE9om8tyWc/Ab8Eo501SHs9l3b2J8snf
 w/5STd2CYxyKf1/9JLGnBvGo754O9NvdzBttRlygB14gCCtS/SDk/ELG2Ae+/a9P
 YgRk2+257h8PMD3qlp94dLidEZN4kYxP/J6oj0t1/TIkERWfZjzkg5tKn3/hEcU9
 qM97ZBTplTm6FM+Dt/Vk
 =zCVK
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux

Pull clock framework updates from Mike Turquette:
 "The clock framework changes contain the usual driver additions,
  enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based
  devices.

  Additionally the framework core underwent a bit of surgery with two
  major changes:

   - The boundary between the clock core and clock providers (e.g clock
     drivers) is now more well defined with dedicated provider helper
     functions.  struct clk no longer maps 1:1 with the hardware clock
     but is a true per-user cookie which helps us tracker users of
     hardware clocks and debug bad behavior.

   - The addition of rate constraints for clocks.  Rate ranges are now
     supported which are analogous to the voltage ranges in the
     regulator framework.

  Unfortunately these changes to the core created some breakeage.  We
  think we fixed it all up but for this reason there are lots of last
  minute commits trying to undo the damage"

* tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux: (113 commits)
  clk: Only recalculate the rate if needed
  Revert "clk: mxs: Fix invalid 32-bit access to frac registers"
  clk: qoriq: Add support for the platform PLL
  powerpc/corenet: Enable CLK_QORIQ
  clk: Replace explicit clk assignment with __clk_hw_set_clk
  clk: Add __clk_hw_set_clk helper function
  clk: Don't dereference parent clock if is NULL
  MIPS: Alchemy: Remove bogus args from alchemy_clk_fgcs_detr
  clkdev: Always allocate a struct clk and call __clk_get() w/ CCF
  clk: shmobile: div6: Avoid division by zero in .round_rate()
  clk: mxs: Fix invalid 32-bit access to frac registers
  clk: omap: compile legacy omap3 clocks conditionally
  clkdev: Export clk_register_clkdev
  clk: Add rate constraints to clocks
  clk: remove clk-private.h
  pci: xgene: do not use clk-private.h
  arm: omap2+ remove dead clock code
  clk: Make clk API return per-user struct clk instances
  clk: tegra: Define PLLD_DSI and remove dsia(b)_mux
  clk: tegra: Add support for the Tegra132 CAR IP block
  ...
2015-02-21 12:30:30 -08:00
Rafael J. Wysocki 3466b547e3 Merge branches 'pnp', 'pm-cpuidle' and 'pm-cpufreq'
* pnp:
  PNP: Switch from __check_region() to __request_region()

* pm-cpuidle:
  cpuidle: powernv: Avoid endianness conversions while parsing DT
  cpuidle: powernv: Read target_residency value of idle states from DT if available

* pm-cpufreq:
  cpufreq: s3c: remove last use of resume_clocks callback
  cpufreq: s3c: remove incorrect __init annotations
2015-02-21 04:29:16 +01:00
Linus Torvalds 3d883483dc Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull more thermal managament updates from Zhang Rui:
 "Specifics:

   - Exynos thermal driver refactoring.  Several cleanups, code
     optimization, unused symbols removal, and unused feature removal in
     Exynos thermal driver.  Thanks Lukasz for this effort.

   - Exynos thermal driver support to OF thermal.  After the code
     refactoring, the driver earned the support to OF thermal.  Chip
     thermal data were moved from driver code to DTS, reducing the code
     footprint.  Thanks Lukasz for this.

   - After receiving the OF thermal support, the exynos thermal driver
     now must allow modular build.  Thanks Arnd for detecting, reporting
     and fixing this.

   - Exynos thermal driver support to Exynos 7 SoC.  Thanks Abhilash for
     this.

   - Accurate temperature reporting on Rockchip thermal driver, thanks
     to Caesar.

   - Fix on how OF thermal enables its zones, thanks Lukasz for fixing.

   - Fixes in OF thermal examples under Documentation/.  Thanks Srinivas
     for fixing"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: exynos: Add TMU support for Exynos7 SoC
  dts: Documentation: Add documentation for Exynos7 SoC thermal bindings
  cpufreq: exynos: allow modular build
  thermal: Fix examples in DT documentation
  thermal: exynos: Correct sanity check at exynos_report_trigger() function
  thermal: Kconfig: Remove config for not used EXYNOS_THERMAL_CORE
  thermal: exynos: Remove exynos_tmu_data.c file
  thermal: rockchip: make temperature reporting much more accurate
  thermal: exynos: Remove exynos_thermal_common.[c|h] files
  thermal: samsung: core: Exynos TMU rework to use device tree for configuration
  dts: Documentation: Update exynos-thermal.txt example for Exynos5440
  dts: Documentation: Extending documentation entry for exynos-thermal
  cpufreq: exynos: Use device tree to determine if cpufreq cooling should be registered
  thermal: exynos: Modify exynos thermal code to use device tree for cpu cooling configuration
  thermal: exynos: Provide thermal_exynos.h file to be included in device tree files
  thermal: exynos: cosmetic: Correct comment format
  thermal: of: Enable thermal_zoneX when sensor is correctly added
2015-02-19 17:51:22 -08:00
Arnd Bergmann 67fadaa276 cpufreq: s3c: remove last use of resume_clocks callback
Commit 32726d2d55 ("ARM: SAMSUNG: Remove legacy clock code")
already removed the callback pointer, but there was one remaining
user:

drivers/cpufreq/s3c24xx-cpufreq.c: In function 's3c_cpufreq_resume_clocks':
drivers/cpufreq/s3c24xx-cpufreq.c:149:14: error: 'struct s3c_cpufreq_info' has no member named 'resume_clocks'
  cpu_cur.info->resume_clocks();
              ^

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 32726d2d55 ("ARM: SAMSUNG: Remove legacy clock code")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 3.17+ <stable@vger.kernel.org> # v3.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-19 06:36:53 +01:00
Arnd Bergmann 61882b6317 cpufreq: s3c: remove incorrect __init annotations
The two functions s3c2416_cpufreq_driver_init and s3c_cpufreq_register
are marked init but are called from a context that might be run after
the __init sections are discarded, as the compiler points out:

WARNING: vmlinux.o(.data+0x1ad9dc): Section mismatch in reference from the variable s3c2416_cpufreq_driver to the function .init.text:s3c2416_cpufreq_driver_init()
WARNING: drivers/built-in.o(.text+0x35b5dc): Section mismatch in reference from the function s3c2410a_cpufreq_add() to the function .init.text:s3c_cpufreq_register()

This removes the __init markings.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-19 06:36:53 +01:00
Rafael J. Wysocki c7fb90dfbe Merge branches 'pm-cpufreq', 'pm-cpuidle', 'pm-devfreq', 'pm-opp' and 'pm-tools'
* pm-cpufreq:
  cpufreq: speedstep-smi: enable interrupts when waiting

* pm-cpuidle:
  intel_idle: support additional Broadwell model

* pm-devfreq:
  PM / devfreq: event: testing the wrong variable

* pm-opp:
  PM / OPP / clk: Remove unnecessary OOM message

* pm-tools:
  tools/power turbostat: support additional Broadwell model
  tools/power turbostat: update parameters, documentation
  tools/power turbostat: Skip printing disabled package C-states
2015-02-13 21:39:06 +01:00
Mikulas Patocka d4d4eda237 cpufreq: speedstep-smi: enable interrupts when waiting
On Dell Latitude C600 laptop with Pentium 3 850MHz processor, the
speedstep-smi driver sometimes loads and sometimes doesn't load with
"change to state X failed" message.

The hardware sometimes refuses to change frequency and in this case, we
need to retry later. I found out that we need to enable interrupts while
waiting. When we enable interrupts, the hardware blockage that prevents
frequency transition resolves and the transition is possible. With
disabled interrupts, the blockage doesn't resolve (no matter how long do
we wait). The exact reasons for this hardware behavior are unknown.

This patch enables interrupts in the function speedstep_set_state that can
be called with disabled interrupts. However, this function is called with
disabled interrupts only from speedstep_get_freqs, so it shouldn't cause
any problem.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com
Cc: All applicable <stable@vger.kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-12 02:02:52 +01:00
Linus Torvalds 872912352c ACPI and power management updates for v3.20-rc1
- Rework of the core ACPI resources parsing code to fix issues
    in it and make using resource offsets more convenient and
    consolidation of some resource-handing code in a couple of places
    that have grown analagous data structures and code to cover the
    the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng).
 
  - ACPI-based IOAPIC hotplug support on top of the resources handling
    rework (Jiang Liu, Yinghai Lu).
 
  - ACPICA update to upstream release 20150204 including an interrupt
    handling rework that allows drivers to install raw handlers for
    ACPI GPEs which then become entirely responsible for the given GPE
    and the ACPICA core code won't touch it (Lv Zheng, David E Box,
    Octavian Purdila).
 
  - ACPI EC driver rework to fix several concurrency issues and other
    problems related to events handling on top of the ACPICA's new
    support for raw GPE handlers (Lv Zheng).
 
  - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
    Subsystem) driver for Intel chips (Ken Xue).
 
  - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus,
    Jarkko Nikula).
 
  - Two new blacklist entries for machines (Samsung 730U3E/740U3E and
    510R) where the native backlight interface doesn't work correctly
    while the ACPI one does (Hans de Goede).
 
  - Rework of the ACPI processor driver's handling of idle states
    to make the code more straightforward and less bloated overall
    (Rafael J Wysocki).
 
  - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
    Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki,
    Yaowei Bai).
 
  - PCI core power management modification to avoid resuming (some)
    runtime-suspended devices during system suspend if they are in
    the right states already (Rafael J Wysocki).
 
  - New SFI-based cpufreq driver for Intel platforms using SFI
    (Srinidhi Kasagar).
 
  - cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
    Doug Anderson, Wolfram Sang).
 
  - SkyLake CPU support and other updates for the intel_pstate driver
    (Kristen Carlson Accardi, Srinivas Pandruvada).
 
  - cpufreq-dt driver cleanup (Markus Elfring).
 
  - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).
 
  - Generic power domains core code fixes and cleanups (Ulf Hansson).
 
  - Operating Performance Points (OPP) core code cleanups and kernel
    documentation update (Nishanth Menon).
 
  - New dabugfs interface to make the list of PM QoS constraints
    available to user space (Nishanth Menon).
 
  - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).
 
  - New devfreq class (devfreq_event) to provide raw utilization data
    to devfreq governors (Chanwoo Choi).
 
  - Assorted minor fixes and cleanups related to power management
    (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist,
    Pavel Machek, Todd E Brandt, Wonhong Kwon).
 
  - turbostat updates (Len Brown) and cpupower Makefile improvement
    (Sriram Raghunathan).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJU2neOAAoJEILEb/54YlRx51QP/jrv1Wb5eMaemzMksPIWI5Zn
 I8IbxzToxu7wDDsrTBRv+LuyllMPrnppFOHHvB35gUYu7Y6I066s3ErwuqeFlbmy
 +VicmyGMahv3yN74qg49MXzWtaJZa8hrFXn8ItujiUIcs08yELi0vBQFlZImIbTB
 PdQngO88VfiOVjDvmKkYUU//9Sc9LCU0ZcdUQXSnA1oNOxuUHjiARz98R03hhSqu
 BWR+7M0uaFbu6XeK+BExMXJTpKicIBZ1GAF6hWrS8V4aYg+hH1cwjf2neDAzZkcU
 UkXieJlLJrCq+ZBNcy7WEhkWQkqJNWei5WYiy6eoQeQpNoliY2V+2OtSMJaKqDye
 PIiMwXstyDc5rgyULN0d1UUzY6mbcUt2rOL0VN2bsFVIJ1HWCq8mr8qq689pQUYv
 tcH18VQ2/6r2zW28sTO/ByWLYomklD/Y6bw2onMhGx3Knl0D8xYJKapVnTGhr5eY
 d4k41ybHSWNKfXsZxdJc+RxndhPwj9rFLfvY/CZEhLcW+2pAiMarRDOPXDoUI7/l
 aJpmPzy/6mPXGBnTfr6jKDSY3gXNazRIvfPbAdiGayKcHcdRM4glbSbNH0/h1Iq6
 HKa8v9Fx87k1X5r4ZbhiPdABWlxuKDiM7725rfGpvjlWC3GNFOq7YTVMOuuBA225
 Mu9PRZbOsZsnyNkixBpX
 =zZER
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "We have a few new features this time, including a new SFI-based
  cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new
  devfreq class for providing its governors with raw utilization data
  and a new ACPI driver for AMD SoCs.

  Still, the majority of changes here are reworks of existing code to
  make it more straightforward or to prepare it for implementing new
  features on top of it.  The primary example is the rework of ACPI
  resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with
  support for IOAPIC hotplug implemented on top of it, but there is
  quite a number of changes of this kind in the cpufreq core, ACPICA,
  ACPI EC driver, ACPI processor driver and the generic power domains
  core code too.

  The most active developer is Viresh Kumar with his cpufreq changes.

  Specifics:

   - Rework of the core ACPI resources parsing code to fix issues in it
     and make using resource offsets more convenient and consolidation
     of some resource-handing code in a couple of places that have grown
     analagous data structures and code to cover the the same gap in the
     core (Jiang Liu, Thomas Gleixner, Lv Zheng).

   - ACPI-based IOAPIC hotplug support on top of the resources handling
     rework (Jiang Liu, Yinghai Lu).

   - ACPICA update to upstream release 20150204 including an interrupt
     handling rework that allows drivers to install raw handlers for
     ACPI GPEs which then become entirely responsible for the given GPE
     and the ACPICA core code won't touch it (Lv Zheng, David E Box,
     Octavian Purdila).

   - ACPI EC driver rework to fix several concurrency issues and other
     problems related to events handling on top of the ACPICA's new
     support for raw GPE handlers (Lv Zheng).

   - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
     Subsystem) driver for Intel chips (Ken Xue).

   - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko
     Nikula).

   - Two new blacklist entries for machines (Samsung 730U3E/740U3E and
     510R) where the native backlight interface doesn't work correctly
     while the ACPI one does (Hans de Goede).

   - Rework of the ACPI processor driver's handling of idle states to
     make the code more straightforward and less bloated overall (Rafael
     J Wysocki).

   - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
     Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei
     Bai).

   - PCI core power management modification to avoid resuming (some)
     runtime-suspended devices during system suspend if they are in the
     right states already (Rafael J Wysocki).

   - New SFI-based cpufreq driver for Intel platforms using SFI
     (Srinidhi Kasagar).

   - cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
     Doug Anderson, Wolfram Sang).

   - SkyLake CPU support and other updates for the intel_pstate driver
     (Kristen Carlson Accardi, Srinivas Pandruvada).

   - cpufreq-dt driver cleanup (Markus Elfring).

   - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).

   - Generic power domains core code fixes and cleanups (Ulf Hansson).

   - Operating Performance Points (OPP) core code cleanups and kernel
     documentation update (Nishanth Menon).

   - New dabugfs interface to make the list of PM QoS constraints
     available to user space (Nishanth Menon).

   - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).

   - New devfreq class (devfreq_event) to provide raw utilization data
     to devfreq governors (Chanwoo Choi).

   - Assorted minor fixes and cleanups related to power management
     (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel
     Machek, Todd E Brandt, Wonhong Kwon).

   - turbostat updates (Len Brown) and cpupower Makefile improvement
     (Sriram Raghunathan)"

* tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits)
  tools/power turbostat: relax dependency on APERF_MSR
  tools/power turbostat: relax dependency on invariant TSC
  Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources
  tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS
  tools/power turbostat: relax dependency on root permission
  ACPI / video: Add disable_native_backlight quirk for Samsung 510R
  ACPI / PM: Remove unneeded nested #ifdef
  USB / PM: Remove unneeded #ifdef and associated dead code
  intel_pstate: provide option to only use intel_pstate with HWP
  ACPI / EC: Add GPE reference counting debugging messages
  ACPI / EC: Add query flushing support
  ACPI / EC: Refine command storm prevention support
  ACPI / EC: Add command flushing support.
  ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag
  ACPI: add AMD ACPI2Platform device support for x86 system
  ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse()
  ACPI / EC: Update revision due to raw handler mode.
  ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp.
  ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode.
  ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model
  ...
2015-02-10 15:09:41 -08:00
Rafael J. Wysocki c488ea4613 Merge branch 'sfi' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-cpufreq
Pull SFI-based cpufreq driver for v3.20 from Len Brown.

* 'sfi' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  cpufreq: Add SFI based cpufreq driver support
  SFI: fix compiler warnings
2015-02-09 23:43:53 +01:00
Kristen Carlson Accardi d64c3b0bb9 intel_pstate: provide option to only use intel_pstate with HWP
Allow users the option to disable the driver for any hardware
which does not support HWP.

Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 22:54:18 +01:00
Markus Elfring 17ad13ba84 cpufreq-dt: Drop unnecessary check before cpufreq_cooling_unregister() invocation
The cpufreq_cooling_unregister() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 23:28:37 +01:00
Viresh Kumar f7b2706117 cpufreq: Create for_each_governor()
To make code more readable and less error prone, lets create a helper macro for
iterating over all available governors.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 23:28:01 +01:00
Viresh Kumar b4f0676fe2 cpufreq: Create for_each_policy()
To make code more readable and less error prone, lets create a helper macro for
iterating over all active policies.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 23:27:45 +01:00
Viresh Kumar 1e63eaf0c4 cpufreq: Drop cpufreq_disabled() check from cpufreq_cpu_{get|put}()
When cpufreq is disabled, the per-cpu variable would have been set to
NULL. Remove this unnecessary check.

[ Changelog from Saravana Kannan. ]

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 23:26:02 +01:00
Viresh Kumar 6ffae8c06f cpufreq: Set cpufreq_cpu_data to NULL before putting kobject
In __cpufreq_remove_dev_finish(), per-cpu 'cpufreq_cpu_data' needs
to be cleared before calling kobject_put(&policy->kobj) and under
cpufreq_driver_lock. Otherwise, if someone else calls cpufreq_cpu_get()
in parallel with it, they can obtain a non-NULL policy from that after
kobject_put(&policy->kobj) was executed.

Consider this case:

Thread A				Thread B
cpufreq_cpu_get()
  acquire cpufreq_driver_lock
  read-per-cpu cpufreq_cpu_data
					kobject_put(&policy->kobj);
  kobject_get(&policy->kobj);
					...
					per_cpu(&cpufreq_cpu_data, cpu) = NULL

And this will result in a warning like this one:

 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 4 at include/linux/kref.h:47
 kobject_get+0x41/0x50()
 Modules linked in: acpi_cpufreq(+) nfsd auth_rpcgss nfs_acl
 lockd grace sunrpc xfs libcrc32c sd_mod ixgbe igb mdio ahci hwmon
 ...
 Call Trace:
  [<ffffffff81661b14>] dump_stack+0x46/0x58
  [<ffffffff81072b61>] warn_slowpath_common+0x81/0xa0
  [<ffffffff81072c7a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff812e16d1>] kobject_get+0x41/0x50
  [<ffffffff815262a5>] cpufreq_cpu_get+0x75/0xc0
  [<ffffffff81527c3e>] cpufreq_update_policy+0x2e/0x1f0
  [<ffffffff810b8cb2>] ? up+0x32/0x50
  [<ffffffff81381aa9>] ? acpi_ns_get_node+0xcb/0xf2
  [<ffffffff81381efd>] ? acpi_evaluate_object+0x22c/0x252
  [<ffffffff813824f6>] ? acpi_get_handle+0x95/0xc0
  [<ffffffff81360967>] ? acpi_has_method+0x25/0x40
  [<ffffffff81391e08>] acpi_processor_ppc_has_changed+0x77/0x82
  [<ffffffff81089566>] ? move_linked_works+0x66/0x90
  [<ffffffff8138e8ed>] acpi_processor_notify+0x58/0xe7
  [<ffffffff8137410c>] acpi_ev_notify_dispatch+0x44/0x5c
  [<ffffffff8135f293>] acpi_os_execute_deferred+0x15/0x22
  [<ffffffff8108c910>] process_one_work+0x160/0x410
  [<ffffffff8108d05b>] worker_thread+0x11b/0x520
  [<ffffffff8108cf40>] ? rescuer_thread+0x380/0x380
  [<ffffffff81092421>] kthread+0xe1/0x100
  [<ffffffff81092340>] ? kthread_create_on_node+0x1b0/0x1b0
  [<ffffffff81669ebc>] ret_from_fork+0x7c/0xb0
  [<ffffffff81092340>] ? kthread_create_on_node+0x1b0/0x1b0
 ---[ end trace 89e66eb9795efdf7 ]---

The actual code flow is as follows:

 Thread A: Workqueue: kacpi_notify

 acpi_processor_notify()
   acpi_processor_ppc_has_changed()
         cpufreq_update_policy()
           cpufreq_cpu_get()
             kobject_get()

 Thread B: xenbus_thread()

 xenbus_thread()
   msg->u.watch.handle->callback()
     handle_vcpu_hotplug_event()
       vcpu_hotplug()
         cpu_down()
           __cpu_notify(CPU_POST_DEAD..)
             cpufreq_cpu_callback()
               __cpufreq_remove_dev_finish()
                 cpufreq_policy_put_kobj()
                   kobject_put()

cpufreq_cpu_get() gets the policy from per-cpu variable cpufreq_cpu_data
under cpufreq_driver_lock, and once it gets a valid policy it expects it
to not be freed until cpufreq_cpu_put() is called.

But the race happens when another thread puts the kobject first and updates
cpufreq_cpu_data before or later. And so the first thread gets a valid policy
structure and before it does kobject_get() on it, the second one has already
done kobject_put().

Fix this by setting cpufreq_cpu_data to NULL before putting the kobject and that
too under locks.

Reported-by: Ethan Zhao <ethan.zhao@oracle.com>
Reported-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 00:59:29 +01:00
Michael Turquette 54eea32f7e Merge branch 'clk-next' into v3.19-rc7 2015-02-02 14:59:38 -08:00
Arnd Bergmann 8b2b4a4e53 cpufreq: exynos: allow modular build
The exynos cpufreq driver code recently gained a dependency on the
cooling code, which may be a loadable module. This breaks an ARM
allmodconfig build:

drivers/built-in.o: In function `exynos_cpufreq_probe':
:(.text+0x1748e8): undefined reference to `of_cpufreq_cooling_register'

To avoid this problem, change cpufreq Kconfig to allow the drivers
to be loadable modules as well and enforce a dependency on the
thermal module.

This change, in order to allow module builds on this cpufreq
driver, properly constructs the driver into a single module,
instead of several modules. The change also keeps the proper
platform dependency, and therefore, it wont load in platforms
that are not supposed to be loaded. The user will be able to
build the support for all platforms, or select which platforms
(s)he wants (as originally), except that now it can be a module,
instead.

Besides, it will still keep the driver only on those configs
that expect it to be on. And it won't compile/load on platforms
that it is not supposed to. It brings the config ARM_EXYNOS_CPU_FREQ_BOOST_SW
closer to this driver, so it looks better in the menuconfig.

We intentionally change ARM_EXYNOS5440_CPUFREQ to be tristate too, to
avoid future troubles.

Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-pm@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Fixes: e725d26c48 ("cpufreq: exynos: Use device tree to determine if cpufreq cooling should be registered")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-31 14:56:27 -04:00
Kristen Carlson Accardi a04759924e intel_pstate: honor user space min_perf_pct override on resume
If the user has requested an override of the min_perf_pct via
sysfs, then it should be restored whenever policy is updated,
such as on resume.  Take the max of whatever the user requested
and whatever the policy is.

Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-30 01:52:17 +01:00
Srinivas Pandruvada 630ec286dd intel_pstate: respect cpufreq policy request
When thermal or other subsystem requests to change the policy,
use that irrepective of whether cpufreq policy is PERFORMANCE or
not. Without this change, when thermal subsystem passive policy wants
to reduce performance, it still runs at 100%.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-30 01:52:17 +01:00
Kristen Carlson Accardi 0522424ecb intel_pstate: Add num_pstates to sysfs
Add a sysfs interface to display the total number of supported
pstates.  This value is independent of whether turbo has been
enabled or disabled.

Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-30 01:52:17 +01:00
Kristen Carlson Accardi d01b1f48c5 intel_pstate: expose turbo range to sysfs
This patch adds "turbo_pct" to the intel_pstate sysfs interface.
turbo_pct will display the percentage of the total supported
pstates that are in the turbo range.  This value is independent
of whether turbo has been disabled or not.

Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-30 01:52:17 +01:00
Kristen Carlson Accardi 7ab0256e57 intel_pstate: Add support for SkyLake
Add SKL cpuid.

Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-30 01:52:17 +01:00
Lukasz Majewski e725d26c48 cpufreq: exynos: Use device tree to determine if cpufreq cooling should be registered
With thermal subsystem rework it is necessary to tune current cpufreq code
to use cpu frequency change as a potential cooling device.

Now the cpu cooling device is registered only when proper nodes and properties
are available in device tree. Lack of them, however, will not prevent
cpufreq for normal operation.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-24 17:33:14 -04:00
Viresh Kumar 490285c65e cpufreq: stats: drop unnecessary locking
There is no possibility of any race on updating last_index, trans_table or
total_trans as these are updated only by cpufreq_stat_notifier_trans() which
will be called sequentially.

The only place where locking is still relevant is: cpufreq_stats_update(), which
updates time_in_state and last_time. This can be called by two thread in
parallel, that may result in races.

The two threads being:
- sysfs read of time_in_state
- and frequency transition that calls cpufreq_stat_notifier_trans().

Remove locking from the first case mentioned above.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:45 +01:00
Viresh Kumar e73476949c cpufreq: stats: don't update stats on false notifiers
We need to call cpufreq_stats_update() to update 'time_in_state' for the last
frequency. This is achieved by calling it from cpufreq_stat_notifier_trans(),
which is called after frequency transition.

But if we detect that the cpu's frequency haven't really changed and its a false
POSTCHANGE notification, we don't really need to update time_in_state.

It wouldn't cause any harm in calling cpufreq_stats_update() but we can avoid
calling it here and call it when the frequency really changes. The result will
be the same but more efficient.

Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:45 +01:00
Viresh Kumar 9225913d38 cpufreq: stats: don't update stats from show_trans_table()
cpufreq_stats_update() updates time_in_state and nothing else. It should ideally
be updated only in two cases:
- User requested for the current value of time_in_state.
- We have switched states and so need to update time for the last state.

Currently, we are also doing this while user asks for the transition table of
frequencies. It wouldn't do any harm, but no good as well. Its useless here.

Remove it.

Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:45 +01:00
Viresh Kumar c960f9b22d cpufreq: stats: time_in_state can't be NULL in cpufreq_stats_update()
'time_in_state' can't be NULL if 'stats' is valid. These are allocated together
and only if time_in_state is allocated successfully, we update policy->stats.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:44 +01:00
Viresh Kumar a685c6d023 cpufreq: stats: create sysfs group once we are ready
Userspace is free to read value of any file from cpufreq/stats directory once
they are created. __cpufreq_stats_create_table() is creating the sysfs files
first and then allocating resources for them. Though it would be quite difficult
to trigger the racy situation here, but for the sake of keeping sensible code
lets create sysfs entries only after we are ready to go.

This also does some makeup to the routine to make it look better.

Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:44 +01:00
Viresh Kumar d9f354460d cpufreq: remove CPUFREQ_UPDATE_POLICY_CPU notifications
CPUFREQ_UPDATE_POLICY_CPU notifications were used only from cpufreq-stats which
doesn't use it anymore. Remove them.

This also decrements values of other notification macros defined after
CPUFREQ_UPDATE_POLICY_CPU by 1 to remove gaps. Hopefully all users are using
macro's instead of direct numbers and so they wouldn't break as macro values are
changed now.

Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:44 +01:00
Viresh Kumar c92f2125ac cpufreq: stats: drop 'cpu' field of struct cpufreq_stats
'cpu' field of struct cpufreq_stats isn't used anymore and so can be dropped.
This change makes cpufreq_stats_update_policy_cpu() empty and so that is removed
as well.

Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:44 +01:00
Viresh Kumar 7c418ff099 cpufreq: Remove (now) unused 'last_cpu' from struct cpufreq_policy
'last_cpu' was used only from cpufreq-stats and isn't used anymore. Get rid of
it.

Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:44 +01:00
Viresh Kumar 5094160786 cpufreq: stats: rename 'struct cpufreq_stats' objects as 'stats'
Currently we name objects of 'struct cpufreq_stats' as 'stat' and 'stats'.
Use 'stats' to make it consistent.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:44 +01:00
Viresh Kumar a9aaf2915e cpufreq: stats: get rid of per-cpu cpufreq_stats_table
All CPUs sharing a cpufreq policy share stats too. For this reason,
add a stats pointer to struct cpufreq_policy and drop per-CPU variable
cpufreq_stats_table used for accessing cpufreq stats so as to reduce
code complexity.

Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:44 +01:00
Viresh Kumar 2aba0c1bae cpufreq: stats: pass 'stat' to cpufreq_stats_update()
It is better to pass a struct cpufreq_stats pointer to cpufreq_stats_update()
instead of a CPU number, because that's all it needs.

Even if we pass a cpu number to cpufreq_stats_update(), it reads the per-cpu
variable to get 'stats' out of it. So we are doing these operations
unnecessarily:
- First getting the cpu number to pass to cpufreq_stats_update(), stat->cpu.
- And then getting stats from the cpu, per_cpu(cpufreq_stats_table, cpu).

Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:44 +01:00
Viresh Kumar f93dbbbd10 cpufreq: stats: don't check for freq table while freeing stats
While we allocate stats, we do need to check if freq-table is present
or not as we need to use it then. But while freeing stats, all we need
to know is if stats holds a valid pointer value. There is no use of
testing if cpufreq table is present or not.

Don't check it.

Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:43 +01:00
Viresh Kumar 9531347c61 cpufreq: stats: initialize 'cur_time' on its definition
'cur_time' is defined in the first line and is then assigned a value
in the next line. Initialize it while defining it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:43 +01:00
Viresh Kumar 43b9cdaf5c cpufreq: stats: remove unused cpufreq_stats_attribute
It was never used, but is there since the first commit. Remove it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:43 +01:00
Viresh Kumar b8c674482f cpufreq: stats: return -EEXIST when stats are already allocated
__cpufreq_stats_create_table() is called from:

- cpufreq notifier on creation of a new policy. Stats will always be
  NULL here.
- cpufreq_stats_init() for all CPUs as cpufreq-stats might have been
  initialized after cpufreq driver. For any policy, 'stats' will be
  NULL for the first CPU only and will be valid for all other CPUs
  managed by the same policy.

While we return for other CPUs, we don't return the right error value.
It's not that we would fail with -EBUSY. But generally, this is what
these return values mean:
- EBUSY: we are busy right now, try again. And the retry attempt might
  be immediate.
- EEXIST: We already have what you are trying to create and there is no
  need to create it again, and so no more tries are required.

Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:43 +01:00
Viresh Kumar 00d0b29472 cpufreq: stats: Improve module description string
The MODULE_DESCRIPTION() string is just too long and then is broken into
multiple lines just to make checkpatch happy.

Rewrite it to make it more precise.

Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:06:43 +01:00
Viresh Kumar 818c57126e cpufreq: move some initialization stuff to cpufreq_policy_alloc()
We need to initialize completion and work only on policy allocation and not
really on the policy restore side and so we better move this piece of code to
cpufreq_policy_alloc().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:49:35 +01:00
Viresh Kumar ce1bcfe94d cpufreq: check cpufreq_policy_list instead of scanning policies for all CPUs
CPUFREQ_STICKY flag is set by drivers which don't want to get unregistered
even if cpufreq-core isn't able to initialize policy for any CPU.

When this flag isn't set, we try to unregister the driver. To find out
which CPUs are registered and which are not, we try to check per_cpu
cpufreq_cpu_data for all CPUs. Because we have a list of valid policies
available now, we better check if the list is empty or not instead of
the 'for' loop. That will be much more efficient.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:49:35 +01:00
Viresh Kumar 39c132eebd cpufreq: limit the scope of l_p_j variables
These variables are just used within adjust_jiffies() and so must be
local to it. Also there is no need of a dummy routine for CONFIG_SMP
case as we can take care of all that with help of macros in the same
routine. It doesn't look that ugly.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:49:34 +01:00
Viresh Kumar d7a9771c1a cpufreq: use light-weight cpufreq_cpu_get_raw() in __cpufreq_add_dev()
We just need to check if a 'policy' is already present for the cpu we are
adding. We don't need to take all the locks and do kobject usage updates. Use
the light-weight cpufreq_cpu_get_raw() routine instead.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:49:34 +01:00
Viresh Kumar 7f0c020ab6 cpufreq: get rid of 'tpolicy' from __cpufreq_add_dev()
There is no need of this separate variable, use 'policy' instead.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:49:34 +01:00
Viresh Kumar 22a7cfb014 cpufreq: get rid of CONFIG_{HOTPLUG_CPU|SMP} mess
These are messing up more than the benefit they provide. It isn't
a lot of code anyway, that we will compile without them.

Kill them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:49:34 +01:00
Viresh Kumar bc68b7dfda cpufreq: update driver_data->flags only if we are registering driver
We should first check if a cpufreq driver is already registered or not
before updating driver_data->flags.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:49:34 +01:00