Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update for
5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that
were "easy" to determine by pattern matching. The ones after this are
going to be a bit more difficult and the people on the spdx list will be
discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud, always
nice to see in a diffstat.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyQYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnGQCghETUBotn1p3hTjY56VEs6dGzpHMAnRT0m+lv
kbsjBGEJpLbMRB2krnaU
=RMcT
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change first argument to MODULE_PARM_DESC() calls, that each of them
matched the actual module parameter name. The matching results in
changing (the 'parm' section from) the output of `modinfo overlay` from:
parm: ovl_check_copy_up:Obsolete; does nothing
parm: redirect_max:ushort
parm: ovl_redirect_max:Maximum length of absolute redirect xattr value
parm: redirect_dir:bool
parm: ovl_redirect_dir_def:Default to on or off for the redirect_dir feature
parm: redirect_always_follow:bool
parm: ovl_redirect_always_follow:Follow redirects even if redirect_dir feature is turned off
parm: index:bool
parm: ovl_index_def:Default to on or off for the inodes index feature
parm: nfs_export:bool
parm: ovl_nfs_export_def:Default to on or off for the NFS export feature
parm: xino_auto:bool
parm: ovl_xino_auto_def:Auto enable xino feature
parm: metacopy:bool
parm: ovl_metacopy_def:Default to on or off for the metadata only copy up feature
into:
parm: check_copy_up:Obsolete; does nothing
parm: redirect_max:Maximum length of absolute redirect xattr value (ushort)
parm: redirect_dir:Default to on or off for the redirect_dir feature (bool)
parm: redirect_always_follow:Follow redirects even if redirect_dir feature is turned off (bool)
parm: index:Default to on or off for the inodes index feature (bool)
parm: nfs_export:Default to on or off for the NFS export feature (bool)
parm: xino_auto:Auto enable xino feature (bool)
parm: metacopy:Default to on or off for the metadata only copy up feature (bool)
Signed-off-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This nasty little syzbot repro:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000
Creates overlay mounts where the same directory is both in upper and lower
layers. Simplified example:
mkdir foo work
mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work"
The repro runs several threads in parallel that attempt to chdir into foo
and attempt to symlink/rename/exec/mkdir the file bar.
The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests
that an overlay inode already exists in cache and is hashed by the pointer
of the real upper dentry that ovl_create_real() has just created. At the
point of the WARN_ON(), for overlay dir inode lock is held and upper dir
inode lock, so at first, I did not see how this was possible.
On a closer look, I see that after ovl_create_real(), because of the
overlapping upper and lower layers, a lookup by another thread can find the
file foo/bar that was just created in upper layer, at overlay path
foo/foo/bar and hash the an overlay inode with the new real dentry as lower
dentry. This is possible because the overlay directory foo/foo is not
locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find
it without taking upper dir inode shared lock.
Overlapping layers is considered a wrong setup which would result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn()
instead to cover all cases of failure to get an overlay inode.
The error returned from failure to insert new inode to cache with
inode_insert5() was changed to -EEXIST, to distinguish from the error
-ENOMEM returned on failure to get/allocate inode with iget5_locked().
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Fixes: 01b39dcc95 ("ovl: use inode_insert5() to hash a newly...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Theodore Ts'o reported a v4.19 regression with docker-dropbox:
https://marc.info/?l=linux-fsdevel&m=154070089431116&w=2
"I was rebuilding my dropbox Docker container, and it failed in 4.19
with the following error:
...
dpkg: error: error creating new backup file \
'/var/lib/dpkg/status-old': Invalid cross-device link"
The problem did not reproduce with metacopy feature disabled.
The error was caused by insufficient credentials to set
"trusted.overlay.redirect" xattr on link of a metacopy file.
Reproducer:
echo Y > /sys/module/overlay/parameters/redirect_dir
echo Y > /sys/module/overlay/parameters/metacopy
cd /tmp
mkdir l u w m
chmod 777 l u
touch l/foo
ln l/foo l/link
chmod 666 l/foo
mount -t overlay none -olowerdir=l,upperdir=u,workdir=w m
su fsgqa
ln m/foo m/bar
[ 21.455823] overlayfs: failed to set redirect (-1)
ln: failed to create hard link 'm/bar' => 'm/foo':\
Invalid cross-device link
Reported-by: Theodore Y. Ts'o <tytso@mit.edu>
Reported-by: Maciej Zięba <maciekz82@gmail.com>
Fixes: 4120fe64dc ("ovl: Set redirect on upper inode when it is linked")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Kaixuxia repors that it's possible to crash overlayfs by removing the
whiteout on the upper layer before creating a directory over it. This is a
reproducer:
mkdir lower upper work merge
touch lower/file
mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merge
rm merge/file
ls -al merge/file
rm upper/file
ls -al merge/
mkdir merge/file
Before commencing with a vfs_rename(..., RENAME_EXCHANGE) verify that the
lookup of "upper" is positive and is a whiteout, and return ESTALE
otherwise.
Reported by: kaixuxia <xiakaixu1987@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: e9be9d5e76 ("overlay filesystem")
Cc: <stable@vger.kernel.org> # v3.18
There is no functional change but it seems better to get size by calling
posix_acl_xattr_size() instead of calling posix_acl_to_xattr() with
NULL buffer argument. Additionally, remove unnecessary assignments.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
It just makes the interface strange without adding any significant value.
The only case where locked is false and return value is 0 is in
ovl_rename() when new is negative, so handle that case explicitly in
ovl_rename().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
linking a non-copied-up file into a non-copied-up parent results in a
nested call to mutex_lock_interruptible(&oi->lock). Fix this by copying up
target parent before ovl_nlink_start(), same as done in ovl_rename().
~/unionmount-testsuite$ ./run --ov -s
~/unionmount-testsuite$ ln /mnt/a/foo100 /mnt/a/dir100/
WARNING: possible recursive locking detected
--------------------------------------------
ln/1545 is trying to acquire lock:
00000000bcce7c4c (&ovl_i_lock_key[depth]){+.+.}, at:
ovl_copy_up_start+0x28/0x7d
but task is already holding lock:
0000000026d73d5b (&ovl_i_lock_key[depth]){+.+.}, at:
ovl_nlink_start+0x3c/0xc1
[SzM: this seems to be a false positive, but doing the copy-up first is
harmless and removes the lockdep splat]
Reported-by: syzbot+3ef5c0d1a5cb0b21e6be@syzkaller.appspotmail.com
Fixes: 5f8415d6b8 ("ovl: persistent overlay inode nlink for...")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
...otherwise there will be list corruption due to inode_sb_list_add() being
called for inode already on the sb list.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: e950564b97 ("vfs: don't evict uninitialized inode")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we create a hardlink to a metacopy upper file, first the redirect on
that inode. Path based lookup will not work with newly created link and
redirect will solve that issue.
Also use absolute redirect as two hardlinks could be in different
directores and relative redirect will not work.
I have not put any additional locking around setting redirects while
introducing redirects for non-dir files. For now it feels like existing
locking is sufficient. If that's not the case, we will have add more
locking. Following is my rationale about why do I think current locking
seems ok.
Basic problem for non-dir files is that more than on dentry could be
pointing to same inode and in theory only relying on dentry based locks
(d->d_lock) did not seem sufficient.
We set redirect upon rename and upon link creation. In both the paths for
non-dir file, VFS locks both source and target inodes (->i_rwsem). That
means vfs rename and link operations on same source and target can't he
happening in parallel (Even if there are multiple dentries pointing to same
inode). So that probably means that at a time on an inode, only one call
of ovl_set_redirect() could be working and we don't need additional locking
in ovl_set_redirect().
ovl_inode->redirect is initialized only when inode is created new. That
means it should not race with any other path and setting
ovl_inode->redirect should be fine.
Reading of ovl_inode->redirect happens in ovl_get_redirect() path. And
this called only in ovl_set_redirect(). And ovl_set_redirect() already
seemed to be protected using ->i_rwsem. That means ovl_set_redirect() and
ovl_get_redirect() on source/target inode should not make progress in
parallel and is mutually exclusive. Hence no additional locking required.
Now, only case where ovl_set_redirect() and ovl_get_redirect() could race
seems to be case of absolute redirects where ovl_get_redirect() has to
travel up the tree. In that case we already take d->d_lock and that should
be sufficient as directories will not have multiple dentries pointing to
same inode.
So given VFS locking and current usage of redirect, current locking around
redirect seems to be ok for non-dir as well. Once we have the logic to
remove redirect when metacopy file gets copied up, then we probably will
need additional locking.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Set redirect on metacopy files upon rename. This will help find data
dentry in lower dirs.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Copy up mtime and ctime to overlay inode after times in real object are
modified. Be careful not to dirty cachelines when not necessary.
This is in preparation for moving overlay functionality out of the VFS.
This patch shouldn't have any observable effect.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently, there is a small window where ovl_obtain_alias() can
race with ovl_instantiate() and create two different overlay inodes
with the same underlying real non-dir non-hardlink inode.
The race requires an adversary to guess the file handle of the
yet to be created upper inode and decode the guessed file handle
after ovl_creat_real(), but before ovl_instantiate().
This race does not affect overlay directory inodes, because those
are decoded via ovl_lookup_real() and not with ovl_obtain_alias().
This patch fixes the race, by using inode_insert5() to add a newly
created inode to cache.
If the newly created inode apears to already exist in cache (hashed
by the same real upper inode), we instantiate the dentry with the old
inode and drop the new inode, instead of silently not hashing the new
inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
vfs_mkdir() may succeed and leave the dentry passed to it unhashed and
negative. ovl_create_real() is the last caller breaking when that
happens.
[amir: split re-factoring of ovl_create_temp() to prep patch
add comment about unhashed dir after mkdir
add pr_warn() if mkdir succeeds and lookup fails]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Also used ovl_create_temp() in ovl_create_index() instead of calling
ovl_do_mkdir() directly, so now all callers of ovl_do_mkdir() are routed
through ovl_create_real(), which paves the way for Al's fix for non-hashed
result from vfs_mkdir().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Al Viro suggested to simplify callers of ovl_create_real() by
returning the created dentry (or ERR_PTR) from ovl_create_real().
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlayfs should cope with online changes to underlying layer
without crashing the kernel, which is what xfstest overlay/019
checks.
This test may sometimes trigger WARN_ON() in ovl_create_or_link()
when linking an overlay inode that has been changed on underlying
layer.
Remove those WARN_ON() to prevent the stress test from failing.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With NFS export feature enabled, when overlay inode nlink drops to
zero, instead of removing the index entry, replace it with a whiteout
index entry.
This is needed for NFS export in order to prevent future open by handle
from opening the lower file directly.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The functions ovl_lower_positive() and ovl_check_empty_dir() both take
inode mutex on the real lower dir under ovl_want_write() which takes
the upper_mnt sb_writers lock.
While this is not a clear locking order or layering violation, it creates
an undesired lock dependency between two unrelated layers for no good
reason.
This lock dependency materializes to a false(?) positive lockdep warning
when calling rmdir() on a nested overlayfs, where both nested and
underlying overlayfs both use the same fs type as upper layer.
rmdir() on the nested overlayfs creates the lock chain:
sb_writers of upper_mnt (e.g. tmpfs) in ovl_do_remove()
ovl_i_mutex_dir_key[] of lower overlay dir in ovl_lower_positive()
rmdir() on the underlying overlayfs creates the lock chain in
reverse order:
ovl_i_mutex_dir_key[] of lower overlay dir in vfs_rmdir()
sb_writers of nested upper_mnt (e.g. tmpfs) in ovl_do_remove()
To rid of the unneeded locking dependency, move both ovl_lower_positive()
and ovl_check_empty_dir() to before ovl_want_write() in rmdir() and
rename() implementation.
This change spreads the pieces of ovl_check_empty_and_clear() directly
inside the rmdir()/rename() implementations so the helper is no longer
needed and removed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Conform two stray warning messages to the standard overlayfs: prefix.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_rename() updates dir cache version for impure old parent if an entry
with copy up origin is moved into old parent, but it did not update
cache version if the entry moved out of old parent has a copy up origin.
[SzM] Same for new dir: we updated the version if an entry with origin was
moved in, but not if an entry with origin was moved out.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
An "origin && non-merge" upper dir may have leftover whiteouts that
were created in past mount. overlayfs does no clear this dir when we
delete it, which may lead to rmdir fail or temp file left in workdir.
Simple reproducer:
mkdir lower upper work merge
mkdir -p lower/dir
touch lower/dir/a
mount -t overlay overlay -olowerdir=lower,upperdir=upper,\
workdir=work merge
rm merge/dir/a
umount merge
rm -rf lower/*
touch lower/dir (*)
mount -t overlay overlay -olowerdir=lower,upperdir=upper,\
workdir=work merge
rm -rf merge/dir
Syslog dump:
overlayfs: cleanup of 'work/#7' failed (-39)
(*): if we do not create the regular file, the result is different:
rm: cannot remove "dir/": Directory not empty
This patch adds a check for the case of non-merge dir that may contain
whiteouts, and calls ovl_check_empty_dir() to check and clear whiteouts
from upper dir when an empty dir is being deleted.
[amir: split patch from ovl_check_empty_dir() cleanup
rename ovl_is_origin() to ovl_may_have_whiteouts()
check OVL_WHITEOUTS flag instead of checking origin xattr]
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Filter out non-whiteout non-upper entries from list of merge dir entries
while checking if merge dir is empty in ovl_check_empty_dir().
The remaining work for ovl_clear_empty() is to clear all entries on the
list.
[amir: split patch from rmdir bug fix]
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the ovl_lock_rename_workdir() helper which requires
unlock_rename() only on lock success.
Fixes: ("fd210b7d67ee ovl: move copy up lock out")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
GFP_TEMPORARY was introduced by commit e12ba74d8f ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation. As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.
The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory. So
this is rather misleading and hard to evaluate for any benefits.
I have checked some random users and none of them has added the flag
with a specific justification. I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring. This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.
I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL. Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.
I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.
This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic. It
seems to be a heuristic without any measured advantage for most (if not
all) its current users. The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers. So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.
[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org
[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impure directories are ones which contain objects with origins (i.e. those
that have been copied up). These are relevant to readdir operation only
because of the d_ino field, no other transformation is necessary. Also a
directory can become impure between two getdents(2) calls.
This patch creates a cache for impure directories. Unlike the cache for
merged directories, this one only contains entries with origin and is not
refcounted but has a its lifetime tied to that of the dentry.
Similarly to the merged cache, the impure cache is invalidated based on a
version number. This version number is incremented when an entry with
origin is added or removed from the directory.
If the cache is empty, then the impure xattr is removed from the directory.
This patch also fixes up handling of d_ino for the ".." entry if the parent
directory is merged.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When linking a file with copy up origin into a new parent, mark the
new parent dir "impure".
Fixes: ee1d6d37b6 ("ovl: mark upper dir with type origin entries "impure"")
Cc: <stable@vger.kernel.org> # v4.12
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With inodes index enabled, an overlay inode nlink counts the union of upper
and non-covered lower hardlinks. During the lifetime of a non-pure upper
inode, the following nlink modifying operations can happen:
1. Lower hardlink copy up
2. Upper hardlink created, unlinked or renamed over
3. Lower hardlink whiteout or renamed over
For the first, copy up case, the union nlink does not change, whether the
operation succeeds or fails, but the upper inode nlink may change.
Therefore, before copy up, we store the union nlink value relative to the
lower inode nlink in the index inode xattr trusted.overlay.nlink.
For the second, upper hardlink case, the union nlink should be incremented
or decremented IFF the operation succeeds, aligned with nlink change of the
upper inode. Therefore, before link/unlink/rename, we store the union nlink
value relative to the upper inode nlink in the index inode.
For the last, lower cover up case, we simplify things by preceding the
whiteout or cover up with copy up. This makes sure that there is an index
upper inode where the nlink xattr can be stored before the copied up upper
entry is unlink.
Return the overlay inode nlinks for indexed upper inodes on stat(2).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For rename, we need to ensure that an upper alias exists for hard links
before attempting the operation. Introduce a flag in ovl_entry to track
the state of the upper alias.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Bad index entries are entries whose name does not match the
origin file handle stored in trusted.overlay.origin xattr.
Bad index entries could be a result of a system power off in
the middle of copy up.
Stale index entries are entries whose origin file handle is
stale. Stale index entries could be a result of copying layers
or removing lower entries while the overlay is not mounted.
The case of copying layers should be detected earlier by the
verification of upper root dir origin and index dir origin.
Both bad and stale index entries are detected and removed
on mount.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When checking for consistency in directory operations (unlink, rename,
etc.) match inodes not dentries.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch fixes an overlay inode nlink leak in the case where
ovl_rename() renames over a non-dir.
This is not so critical, because overlay inode doesn't rely on
nlink dropping to zero for inode deletion.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
An upper dir is marked "impure" to let ovl_iterate() know that this
directory may contain non pure upper entries whose d_ino may need to be
read from the origin inode.
We already mark a non-merge dir "impure" when moving a non-pure child
entry inside it, to let ovl_iterate() know not to iterate the non-merge
dir directly.
Mark also a merge dir "impure" when moving a non-pure child entry inside
it and when copying up a child entry inside it.
This can be used to optimize ovl_iterate() to perform a "pure merge" of
upper and lower directories, merging the content of the directories,
without having to read d_ino from origin inodes.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When moving a merge dir or non-dir with copy up origin into a non-merge
upper dir (a.k.a pure upper dir), we are marking the target parent dir
"impure". ovl_iterate() iterates pure upper dirs directly, because there is
no need to filter out whiteouts and merge dir content with lower dir. But
for the case of an "impure" upper dir, ovl_iterate() will not be able to
iterate the real upper dir directly, because it will need to lookup the
origin inode and use it to fill d_ino.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On failure to set opaque/redirect xattr on rename, skip setting xattr and
return -EXDEV.
On failure to set opaque xattr when creating a new directory, -EIO is
returned instead of -EOPNOTSUPP.
Any failure to set those xattr will be recorded in super block and
then setting any xattr on upper won't be attempted again.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
An upper type non directory dentry that is a copy up target
should have a reference to its lower copy up origin.
There are three ways for an upper type dentry to be instantiated:
1. A lower type dentry that is being copied up
2. An entry that is found in upper dir by ovl_lookup()
3. A negative dentry is hardlinked to an upper type dentry
In the first case, the lower reference is set before copy up.
In the second case, the lower reference is found by ovl_lookup().
In the last case of hardlinked upper dentry, it is not easy to
update the lower reference of the negative dentry. Instead,
drop the newly hardlinked negative dentry from dcache and let
the next access call ovl_lookup() to find its lower reference.
This makes sure that the inode number reported by stat(2) after
the hardlink is created is the same inode number that will be
reported by stat(2) after mount cycle, which is the inode number
of the lower copy up origin of the hardlink source.
NOTE that this does not fix breaking of lower hardlinks on copy
up, but only fixes the case of lower nlink == 1, whose upper copy
up inode is hardlinked in upper dir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
stat(2) on overlay directories reports the overlay temp inode
number, which is constant across copy up, but is not persistent.
When all layers are on the same fs, report the copy up origin inode
number for directories.
This inode number is persistent, unique across the overlay mount and
constant across copy up.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The optimization for opaque dir create was wrongly being applied
also to non-dir create.
Fixes: 97c684cc91 ("ovl: create directories inside merged parent opaque")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.10
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
FWIW, there's a bit of abuse of struct kstat in overlayfs object
creation paths - for one thing, it ends up with a very small subset
of struct kstat (mode + rdev), for another it also needs link in
case of symlinks and ends up passing it separately.
IMO it would be better to introduce a separate object for that.
In principle, we might even lift that thing into general API and switch
->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell
knows, perhaps ->create() as well...
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The benefit of making directories opaque on creation is that lookups can
stop short when they reach the original created directory, instead of
continue lookup the entire depth of parent directory stack.
The best case is overlay with N layers, performing lookup for first level
directory, which exists only in upper. In that case, there will be only
one lookup instead of N.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
oe->opaque is set for
a) whiteouts
b) directories having the "trusted.overlay.opaque" xattr
Case b can be simplified, since setting the xattr always implies setting
oe->opaque. Also once set, the opaque flag is never cleared.
Don't need to set opaque flag for non-directories.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add a module option to allow tuning the max size of absolute redirects.
Default is 256.
Size of relative redirects is naturally limited by the the underlying
filesystem's max filename length (usually 255).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Linus Torvalds
Thomas Gleixner
Nicolas Schier
Amir Goldstein
Miklos Szeredi
Chengguang Xu
Miklos Szeredi
Vivek Goyal
Al Viro
zhangyi (F)
Michal Hocko
David Howells