Граф коммитов

132 Коммитов

Автор SHA1 Сообщение Дата
Christoph Hellwig ef14f0c157 xfs: use generic Posix ACL code
This patch rips out the XFS ACL handling code and uses the generic
fs/posix_acl.c code instead.  The ondisk format is of course left
unchanged.

This also introduces the same ACL caching all other Linux filesystems do
by adding pointers to the acl and default acl in struct xfs_inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-10 17:07:47 +02:00
Christoph Hellwig 8b5403a6d7 xfs: remove SYNC_BDFLUSH
SYNC_BDFLUSH is a leftover from IRIX and rather misnamed for todays
code.  Make xfs_sync_fsdata and xfs_dq_sync use the SYNC_TRYLOCK flag
for not blocking on logs just as the inode sync code already does.

For xfs_sync_fsdata it's a trivial 1:1 replacement, but for xfs_qm_sync
I use the opportunity to decouple the non-blocking lock case from the
different flushing modes, similar to the inode sync code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 15:37:16 +02:00
Christoph Hellwig fe588ed328 xfs: use generic inode iterator in xfs_qm_dqrele_all_inodes
Use xfs_inode_ag_iterator instead of opencoding the inode walk in the
quota code.  Mark xfs_inode_ag_iterator and xfs_sync_inode_valid non-static
to allow using them from the quota code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 15:35:27 +02:00
Christoph Hellwig 7d095257e3 xfs: kill xfs_qmops
Kill the quota ops function vector and replace it with direct calls or
stubs in the CONFIG_XFS_QUOTA=n case.

Make sure we check XFS_IS_QUOTA_RUNNING in the right spots.  We can remove
the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set
otherwise.

This brings us back closer to the way this code worked in IRIX and earlier
Linux versions, but we keep a lot of the more useful factoring of common
code.

Eventually we should also kill xfs_qm_bhv.c, but that's left for a later
patch.

Reduces the size of the source code by about 250 lines and the size of
XFS module by about 1.5 kilobytes with quotas enabled:

   text	   data	    bss	    dec	    hex	filename
 615957	   2960	   3848	 622765	  980ad	fs/xfs/xfs.o
 617231	   3152	   3848	 624231	  98667	fs/xfs/xfs.o.old

Fallout:

 - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects
   the inode locked and xfs_qm_dqattach which does the locking around it,
   thus removing XFS_QMOPT_ILOCKED.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 15:33:32 +02:00
Christoph Hellwig a0b0b8a5b3 xfs: kill mutex_t typedef
People continue to complain about this for weird reasons, but there's
really no point in keeping this typedef for a couple of users anyway.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-29 09:51:00 +02:00
Christoph Hellwig fcafb71b57 xfs: get rid of indirections in the quotaops implementation
Currently we call from the nicely abstracted linux quotaops into a ugly
multiplexer just to split the calls out at the same boundary again.
Rewrite the quota ops handling to remove that obfucation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-02-09 08:47:34 +01:00
Christoph Hellwig c9a192dcf9 xfs: sanitize qh_lock wrappers
Get rid of various obsfucating wrappers for accessing the quota hash lock,
we only keep the accessors for accessing the mplist and freelist locks as
they encode a multi-level datastructure walk.  But make sure all of them
are defined in the same way as simple macros.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-02-09 08:47:22 +01:00
Christoph Hellwig 7201813bf5 xfs: use mutex_is_locked in XFS_DQ_IS_LOCKED
Now that we have a helper to test if a mutex is held use it instead of our
own little hacks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-02-09 08:39:24 +01:00
Christoph Hellwig e249458220 xfs: remove XFS_QM_LOCK/XFS_QM_UNLOCK/XFS_QM_HOLD/XFS_QM_RELE
Remove these macros which only obsfucated the code in rather nast ways.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-02-09 08:38:39 +01:00
Christoph Hellwig 8e9b6e7fa4 xfs: remove the unused XFS_QMOPT_DQLOCK flag
The XFS_QMOPT_DQLOCK flag introduces major complexity in the quota subsystem
but isn't actually used anywhere.  So remove it and all the hazzles it
introduces.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-08 21:51:42 +01:00
Christoph Hellwig 98b8c7a0c4 xfs: add a lock class for group/project dquots
We can have both a user and a group/project dquot locked at the same time,
as long as the user dquot is locked first.  Tell lockdep about that fact
by making the group/project dquots a different lock class.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-01-19 02:03:25 +01:00
Christoph Hellwig 5bb87a33b2 xfs: lockdep annotations for xfs_dqlock2
xfs_dqlock2 locks two xfs_dquots, which is fine as it always locks the
dquot with the lower id first.  Use mutex_lock_nested to tell lockdep
about this fact.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-01-19 02:03:19 +01:00
Christoph Hellwig a4edd1da20 xfs: add a separate lock class for the per-mount list of dquots
We can have both a a quota hash chain and the per-mount list locked at
the same time.  But given that both use the same struct dqhash as list
head we have to tell lockdep that they are different lock classes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-01-19 02:03:11 +01:00
Eric Sandeen 9d87c3192d [XFS] Remove the rest of the macro-to-function indirections.
Remove the last of the macros-defined-to-static-functions.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2009-01-16 17:10:42 +11:00
Christoph Hellwig e57481dc26 no explicit xfs_iflush for special inodes during unmount
Currently we explicitly call xfs_iflush on the quota, real-time and root
inodes from xfs_unmount_flush.  But we just called xfs_sync_inodes with
SYNC_ATTR and do an XFS_bflush aka xfs_flush_buftarg to make sure all inodes
are on disk already, so there is no need for these special cases.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-04 15:39:23 +11:00
Christoph Hellwig 00dd4029e9 [XFS] remove bhv_statvfs_t typedef
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-01 11:36:46 +11:00
Dave Chinner 6307091fe6 [XFS] Avoid using inodes that haven't been completely initialised
The radix tree walks in xfs_sync_inodes_ag and xfs_qm_dqrele_all_inodes()
can find inodes that are still undergoing initialisation. Avoid
them by checking for the the XFS_INEW() flag once we have a reference
on the inode. This flag is cleared once the inode is properly initialised.

SGI-PV: 987246

Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-11-10 17:13:23 +11:00
Dave Chinner cb4f0d1d42 [XFS] fix uninitialised variable bug in dquot release
gcc on ARM warns about an using an uninitialised variable
in xfs_qm_dqrele_all_inodes(). This is a real bug, but gcc
on x86_64 is not reporting this warning so it went unnoticed.

Fix the bug by bring the inode radix tree walk code up to
date with xfs_sync_inodes_ag().

SGI-PV: 987246

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-11-10 17:11:18 +11:00
Christoph Hellwig 9d565ffa33 [XFS] kill struct xfs_mount_args
No need to parse the mount option into a structure before applying it to
struct xfs_mount.

The content of xfs_start_flags gets merged into xfs_parseargs. Calls
inbetween don't care and can use mount members instead of the args struct.

This patch uncovered that the mount option for shared filesystems wasn't
ever exposed on Linux. The code to handle it is #if 0'ed in this patch
pending a decision on this feature. I'll send a writeup about it to the
list soon.

SGI-PV: 987246

SGI-Modid: xfs-linux-melb:xfs-kern:32371a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30 17:53:24 +11:00
David Chinner 783a2f656f [XFS] Finish removing the mount pointer from the AIL API
Change all the remaining AIL API functions that are passed struct
xfs_mount pointers to pass pointers directly to the struct xfs_ail being
used. With this conversion, all external access to the AIL is via the
struct xfs_ail. Hence the operation and referencing of the AIL is almost
entirely independent of the xfs_mount that is using it - it is now much
more tightly tied to the log and the items it is tracking in the log than
it is tied to the xfs_mount.

SGI-PV: 988143

SGI-Modid: xfs-linux-melb:xfs-kern:32353a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:39:58 +11:00
David Chinner c7e8f26827 [XFS] Move the AIL lock into the struct xfs_ail
Bring the ail lock inside the struct xfs_ail. This means the AIL can be
entirely manipulated via the struct xfs_ail rather than needing both the
struct xfs_mount and the struct xfs_ail.

SGI-PV: 988143

SGI-Modid: xfs-linux-melb:xfs-kern:32350a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:39:23 +11:00
David Chinner 7b2e2a31f5 [XFS] Allow 64 bit machines to avoid the AIL lock during flushes
When copying lsn's from the log item to the inode or dquot flush lsn, we
currently grab the AIL lock. We do this because the LSN is a 64 bit
quantity and it needs to be read atomically. The lock is used to guarantee
atomicity for 32 bit platforms.

Make the LSN copying a small function, and make the function used
conditional on BITS_PER_LONG so that 64 bit machines don't need to take
the AIL lock in these places.

SGI-PV: 988143

SGI-Modid: xfs-linux-melb:xfs-kern:32349a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:39:12 +11:00
David Chinner a4e4c4f4a8 [XFS] Kill xfs_sync()
There are no more callers to xfs_sync() now, so remove the function
altogther.

SGI-PV: 988140

SGI-Modid: xfs-linux-melb:xfs-kern:32311a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:16:11 +11:00
David Chinner 2030b5aba8 [XFS] use xfs_sync_inodes rather than xfs_syncsub
Kill the unused arg in xfs_syncsub() and xfs_sync_inodes(). For callers of
xfs_syncsub() that only want to flush inodes, replace xfs_syncsub() with
direct calls to xfs_sync_inodes() as that is all that is being done with
the specific flags being passed in.

SGI-PV: 988140

SGI-Modid: xfs-linux-melb:xfs-kern:32305a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:15:12 +11:00
David Chinner bc60a99323 [XFS] Use struct inodes instead of vnodes to kill vn_grab
With the sync code relocated to the linux-2.6 directory we can use struct
inodes directly. If we do the same thing for the quota release code, we
can remove vn_grab altogether. While here, convert the VN_BAD() checks to
is_bad_inode() so we can remove vnodes entirely from this code.

SGI-PV: 988140

SGI-Modid: xfs-linux-melb:xfs-kern:32304a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:15:03 +11:00
David Chinner 5b4d89ae0f [XFS] Traverse inode trees when releasing dquots
Make releasing all inode dquots traverse the per-ag inode radix trees
rather than the mount inode list. This removes another user of the mount
inode list.

Version 3 o fix comment relating to avoiding trying to release the

quota inodes and those in reclaim.

Version 2 o add comment explaining use of gang lookups for a single inode
o use IRELE, not VN_RELE o move check for ag initialisation to caller.

SGI-PV: 988139

SGI-Modid: xfs-linux-melb:xfs-kern:32291a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:08:03 +11:00
David Chinner 2f8a3ce1c2 [XFS] don't block in xfs_qm_dqflush() during async writeback.
Normally dquots are written back via delayed write mechanisms. They are
flushed to their backing buffer by xfssyncd, which is then pushed out by
either AIL or xfsbufd flushing. The flush from the xfssyncd is supposed to
be non-blocking, but xfs_qm_dqflush() always waits for pinned duots, which
means that it will block for the length of time it takes to do a
synchronous log force. This causes unnecessary extra log I/O to be issued
whenever we try to flush a busy dquot.

Avoid the log forces and blocking xfssyncd by making xfs_qm_dqflush() pay
attention to what type of sync it is doing when it sees a pinned dquot and
not waiting when doing non-blocking flushes.

SGI-PV: 988147

SGI-Modid: xfs-linux-melb:xfs-kern:32287a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30 17:07:20 +11:00
Peter Leckie d1de802155 [XFS] Fix build brakage from patch "Clean up dquot pincount code"
This is a fix for patch " Clean up dquot pincount code" which introduced a
build breakage due to a missing & in xfs_qm_dquot_logitem_pin.

SGI-PV: 986789

SGI-Modid: xfs-linux-melb:xfs-kern:32221a

Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30 17:05:18 +11:00
Peter Leckie bc3048e3cd [XFS] Clean up dquot pincount code.
This is a code cleanup and optimization that removes a per mount point
spinlock from the quota code and cleans up the code.

The patch changes the pincount from being an int protected by a spinlock
to an atomic_t allowing the pincount to be manipulated without holding the
spinlock.

This cleanup also protects against random wakup's of both the aild and
xfssyncd by reevaluating the pincount after been woken. Two latter patches
will address the Spurious wakeups.

SGI-PV: 986789

SGI-Modid: xfs-linux-melb:xfs-kern:32215a

Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30 17:05:04 +11:00
Lachlan McIlroy 5695ef46ef [XFS] Use KM_NOFS for debug trace buffers
Use KM_NOFS to prevent recursion back into the filesystem which can cause
deadlocks.

In the case of xfs_iread() we hold the lock on the inode cluster buffer
while allocating memory for the trace buffers. If we recurse back into XFS
to flush data that may require a transaction to allocate extents which
needs log space. This can deadlock with the xfsaild thread which can't
push the tail of the log because it is trying to get the inode cluster
buffer lock.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31838a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-08-13 16:51:57 +10:00
Christoph Hellwig 4249023a5d [XFS] cleanup xfs_mountfs
Remove all the useless flags and code keyed off it in xfs_mountfs.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31831a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:49:32 +10:00
David Chinner e1f49cf20c [XFS] replace dquot flush semaphore with a completion
Use the new completion flush code to implement the dquot flush lock.
Removes one of the final users of semaphores in the XFS code base.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31822a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:41:43 +10:00
Christoph Hellwig 5ec7f8c7d1 [XFS] kill bhv_vnode_t
All remaining bhv_vnode_t instance are in code that's more or less Linux
specific. (Well, for xfs_acl.c that could be argued, but that code is on
the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the
whole tree. We can clean up variable naming and some useless helpers
later.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31781a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:22:40 +10:00
Christoph Hellwig 0b1f917730 [XFS] remove remaining VN_HOLD calls
Use IHOLD(ip) instead of VN_HOLD(VFS_I(ip)).

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31765a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:13:09 +10:00
David Chinner e4f7529108 [XFS] Kill shouty XFS_ITOV() macro
Replace XFS_ITOV() with the new VFS_I() inline.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31724a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:00:45 +10:00
David Chinner 705db4a24e [XFS] kill shouty XFS_ITOV_NULL macro
Replace XFS_ITOV_NULL() with the new VFS_I() inline.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31722a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 15:47:43 +10:00
Christoph Hellwig 26cc002180 [XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/
SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31405a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:59:29 +10:00
Denys Vlasenko 4f0e8a9816 [XFS] Remove unused Falgs parameter from xfs_qm_dqpurge()
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31056a

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:58:08 +10:00
Denys Vlasenko f0e2d93c29 [XFS] Remove unused arg from kmem_free()
kmem_free() function takes (ptr, size) arguments but doesn't actually use
second one.

This patch removes size argument from all callsites.

SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31050a

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:58:07 +10:00
Christoph Hellwig 579aa9caf5 [XFS] shrink mrlock_t
The writer field is not needed for non_DEBU builds so remove it. While
we're at i also clean up the interface for is locked asserts to go through
and xfs_iget.c helper with an interface like the xfs_ilock routines to
isolated the XFS codebase from mrlock internals. That way we can kill
mrlock_t entirely once rw_semaphores grow an islocked facility. Also
remove unused flags to the ilock family of functions.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30902a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29 15:54:02 +10:00
Christoph Hellwig 6a7f422d47 [XFS] kill di_mode checks after xfs_iget
Unless XFS_IGET_CREATE is passed xfs_iget will return ENOENT if it
encounters an inode with di_mode == 0. Remove the duplicated checks in the
callers.

(the log recovery case is not touched for now)

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30898a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29 15:53:31 +10:00
David Chinner db7a19f2c8 [XFS] Ensure xfs_bawrite() errors are checked.
xfs_bawrite() can return immediate error status on async writes. Unlike
xfsbdstrat() we don't ever check the error on the buffer after the call,
so we currently do not catch errors at all here. Ensure we catch and
propagate or warn to the syslog about up-front async write errors.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30824a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 12:00:35 +10:00
David Chinner e5720eec05 [XFS] Propagate errors from xfs_trans_commit().
xfs_trans_commit() can return errors when there are problems in the
transaction subsystem. They are indicative that the entire transaction may
be incomplete, and hence the error should be propagated as there is a good
possibility that there is something fatally wrong in the filesystem. Catch
and propagate or warn about commit errors in the places where they are
currently ignored.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30795a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:58:17 +10:00
David Chinner 88ab020853 [XFS] Propagate quota file truncation errors.
Truncating the quota files can silently fail. Ensure that truncation
errors are propagated to the callers.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30791a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:57:36 +10:00
David Chinner cb6edc26c3 [XFS] Catch errors when turning off quotas.
When turning off quota, we need to write various transactions to the log
to ensure that they are cleanly removed in the case of a crash. We need to
check that the transactions hit the disk correctly. If we fail to write
the final quota off transaction, we are corrupt in memory and so the only
option is to shut the filesystem down at this point.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30790a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:57:26 +10:00
David Chinner 31d5577b35 [XFS] Catch errors resetting quota flags.
Warn to the syslog if we fail to reset the quota flags in the superblock
when a quota check fails.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30789a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:57:16 +10:00
David Chinner 53aa7915d6 [XFS] Clean up quotamount error handling.
xfs_qm_mount_quotas() returns an error status that is ignored. If we fail
to mount quotas, we continue with quota's turned off, which is all handled
inside xfs_qm_mount_quotas(). Mark it as void to indicate that errors need
not be returned to the callers.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30788a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:57:05 +10:00
David Chinner 3c56836f92 [XFS] Check for dquot flush errors
xfs_qm_dqflush() can fail, but the return is not checked anywhere. Hence
we never know if we've failed to flush a dquot to disk. Propagate the
error and warn to the syslog if a flush ever fails.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30787a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:56:55 +10:00
David Chinner 4b8879df8c [XFS] Propagate xfs_qm_dqflush_all() errors.
xfs_qm_dqflush_all() can return flush errors. Ensure they are propagated
into the quotacheck code to determine if the quotacheck succeeded or not.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30786a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:54:56 +10:00
David Chinner 5b1397385b [XFS] xfs_qm_reset_dqcounts() does not return errors.
Declare it void.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30785a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:54:06 +10:00