Граф коммитов

948 Коммитов

Автор SHA1 Сообщение Дата
Xiaotian Feng 9cb308ce8d block: sysfs fix mismatched queue_var_{store,show} in 64bit kernel
In blk-sysfs.c, queue_var_store uses unsigned long to store data,
but queue_var_show uses unsigned int to show data.  This causes,

	# echo 70000000000 > /sys/block/<dev>/queue/read_ahead_kb
	# cat /sys/block/<dev>/queue/read_ahead_kb => get wrong value

Fix it by using unsigned long.

While at it, convert queue_rq_affinity_show() such that it uses bool
variable instead of explicit != 0 testing.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-07-17 16:54:15 +09:00
Tejun Heo 0a09f4319c block: fix failfast merge testing in elv_rq_merge_ok()
Commit ab0fd1debe tries to prevent merge
of requests with different failfast settings.  In elv_rq_merge_ok(),
it compares new bio's failfast flags against the merge target
request's.  However, the flag testing accessors for bio and blk don't
return boolean but the tested bit value directly and FAILFAST on bio
and blk don't match, so directly comparing them with == results in
false negative unnecessary preventing merge of readahead requests.

This patch convert the results to boolean by negating them before
comparison.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jeff Garzik <jeff@garzik.org>
2009-07-17 14:50:43 +09:00
Vivek Goyal 32f2e807a3 cfq-iosched: reset oom_cfqq in cfq_set_request()
In case memory is scarce, we now default to oom_cfqq. Once memory is
available again, we should allocate a new cfqq and stop using oom_cfqq for
a particular io context.

Once a new request comes in, check if we are using oom_cfqq, and if yes,
try to allocate a new cfqq.

Tested the patch by forcing the use of oom_cfqq and upon next request thread
realized that it was using oom_cfqq and it allocated a new cfqq.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10 20:31:54 +02:00
FUJITA Tomonori 76da03467a block: call blk_scsi_ioctl_init()
Currently, blk_scsi_ioctl_init() is not called since it lacks
an initcall marking. This causes the command table to be
unitialized, hence somce commands are block when they should
not have been.

This fixes a regression introduced by commit
018e044689

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10 20:31:53 +02:00
Tejun Heo ab0fd1debe block: don't merge requests of different failfast settings
Block layer used to merge requests and bios with different failfast
settings.  This caused regular IOs to fail prematurely when they were
merged into failfast requests for readahead.

Niel Lambrechts could trigger the problem semi-reliably on ext4 when
resuming from STR.  ext4 uses readahead when reading inodes and
combined with the deterministic extra SATA PHY exception cycle during
resume on the specific configuration, non-readahead inode read would
fail causing ext4 errors.  Please read the following thread for
details.

  http://lkml.org/lkml/2009/5/23/21

This patch makes block layer reject merging if the failfast settings
don't match.  This is correct but likely to lower IO performance by
preventing regular IOs from mingling into surrounding readahead
requests.  Changes to allow such mixed merges and handle errors
correctly will be added later.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Niel Lambrechts <niel.lambrechts@gmail.com>
Cc: Theodore Tso <tytso@mit.edu>
Signed-off-by: Jens Axboe <axboe@carl.(none)>
2009-07-03 21:06:45 +02:00
Shan Wei b706f64281 cfq-iosched: remove redundant check for NULL cfqq in cfq_set_request()
With the changes for falling back to an oom_cfqq, we never fail
to find/allocate a queue in cfq_get_queue(). So remove the check.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 12:41:14 +02:00
NeilBrown db64f680ba blocK: Restore barrier support for md and probably other virtual devices.
The next_ordered flag is only meaningful for devices that use __make_request.
So move the test against next_ordered out of generic code and in to
__make_request

Since this test was added, barriers have not worked on md or any
devices that don't use __make_request and so don't bother to set
next_ordered.  (dm explicitly sets something other than
QUEUE_ORDERED_NONE since
  commit 99360b4c18
but notes in the comments that it is otherwise meaningless).

Cc: Ken Milmore <ken.milmore@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 10:56:26 +02:00
Jens Axboe 018e044689 block: get rid of queue-private command filter
The initial patches to support this through sysfs export were broken
and have been if 0'ed out in any release. So lets just kill the code
and reclaim some space in struct request_queue, if anyone would later
like to fixup the sysfs bits, the git history can easily restore
the removed bits.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 10:56:26 +02:00
Martin K. Petersen 7878cba9f0 block: Create bip slabs with embedded integrity vectors
This patch restores stacking ability to the block layer integrity
infrastructure by creating a set of dedicated bip slabs.  Each bip slab
has an embedded bio_vec array at the end.  This cuts down on memory
allocations and also simplifies the code compared to the original bvec
version.  Only the largest bip slab is backed by a mempool.  The pool is
contained in the bio_set so stacking drivers can ensure forward
progress.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.(none)>
2009-07-01 10:56:25 +02:00
Jens Axboe 6118b70b3a cfq-iosched: get rid of the need for __GFP_NOFAIL in cfq_find_alloc_queue()
Setup an emergency fallback cfqq that we allocate at IO scheduler init
time. If the slab allocation fails in cfq_find_alloc_queue(), we'll just
punt IO to that cfqq instead. This ensures that cfq_find_alloc_queue()
never fails without having to ensure free memory.

On cfqq lookup, always try to allocate a new cfqq if the given cfq io
context has the oom_cfqq assigned. This ensures that we only temporarily
punt to this shared queue.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 10:56:25 +02:00
Jens Axboe d5036d770f cfq-iosched: move cfqq initialization out of cfq_find_alloc_queue()
We're going to be needing that init code outside of that function
to get rid of the __GFP_NOFAIL in cfqq allocation.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 10:56:25 +02:00
FUJITA Tomonori 1119865935 block: revert "bsg: setting rq->bio to NULL"
The SMP handler (sas_smp_request) was fixed to use the block API
properly, so we don't need this workaround to avoid blk_put_request()
warning.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:42 -05:00
Randy Dunlap f740f5ca05 Fix kernel-doc parameter name typo in blk-settings.c:
Warning(block/blk-settings.c:108): No description found for parameter 'lim'
Warning(block/blk-settings.c:108): Excess function parameter 'limits' description in 'blk_set_default_limits'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-19 09:18:32 +02:00
Bartlomiej Zolnierkiewicz 90c699a9ee block: rename CONFIG_LBD to CONFIG_LBDAF
Follow-up to "block: enable by default support for large devices
and files on 32-bit archs".

Rename CONFIG_LBD to CONFIG_LBDAF to:
- allow update of existing [def]configs for "default y" change
- reflect that it is used also for large files support nowadays

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-19 08:08:50 +02:00
Martin K. Petersen 3a02c8e814 block: Fix bounce_pfn setting
Correct stacking bounce_pfn limit setting and prevent warnings on
32-bit.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-18 09:56:20 +02:00
Linus Torvalds 6fd03301d7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (64 commits)
  debugfs: use specified mode to possibly mark files read/write only
  debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.
  xen: remove driver_data direct access of struct device from more drivers
  usb: gadget: at91_udc: remove driver_data direct access of struct device
  uml: remove driver_data direct access of struct device
  block/ps3: remove driver_data direct access of struct device
  s390: remove driver_data direct access of struct device
  parport: remove driver_data direct access of struct device
  parisc: remove driver_data direct access of struct device
  of_serial: remove driver_data direct access of struct device
  mips: remove driver_data direct access of struct device
  ipmi: remove driver_data direct access of struct device
  infiniband: ehca: remove driver_data direct access of struct device
  ibmvscsi: gadget: at91_udc: remove driver_data direct access of struct device
  hvcs: remove driver_data direct access of struct device
  xen block: remove driver_data direct access of struct device
  thermal: remove driver_data direct access of struct device
  scsi: remove driver_data direct access of struct device
  pcmcia: remove driver_data direct access of struct device
  PCIE: remove driver_data direct access of struct device
  ...

Manually fix up trivial conflicts due to different direct driver_data
direct access fixups in drivers/block/{ps3disk.c,ps3vram.c}
2009-06-16 12:57:37 -07:00
Li Zefan e212d6f250 block: remove some includings of blktrace_api.h
When porting blktrace to tracepoints, we changed to trace/block.h
for trace prober declarations.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 11:19:36 +02:00
Martin K. Petersen e475bba2fd block: Introduce helper to reset queue limits to default values
DM reuses the request queue when swapping in a new device table
Introduce blk_set_default_limits() which can be used to reset the the
queue_limits prior to stacking devices.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 08:23:52 +02:00
Jeff Moyer 6923715ae3 cfq: remove extraneous '\n' in blktrace output
I noticed a blank line in blktrace output.  This patch fixes that.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 08:21:04 +02:00
Jens Axboe 0989a025d2 block: don't overwrite bdi->state after bdi_init() has been run
Move the defaults to where we do the init of the backing_dev_info.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 08:21:03 +02:00
Gui Jianfeng 81be834713 cfq: cleanup for last_end_request in cfq_data
Actually, last_end_request in cfq_data isn't used now. So lets
just remove it.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 08:21:03 +02:00
Kay Sievers 2bdf914915 Driver Core: bsg: add nodename for bsg driver
This adds support to the BSG driver to report the proper device name to
userspace for the bsg devices.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:26 -07:00
Kay Sievers b03f38b685 Driver Core: block: add nodename support for block drivers.
This adds support for block drivers to report their requested nodename
to userspace.  It also updates a number of block drivers to provide the
needed subdirectory and device name to be used for them.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:25 -07:00
Randy Dunlap 8ebf975608 block: fix kernel-doc in recent block/ changes
Fix kernel-doc warnings in recently changed block/ source code.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 20:14:23 -07:00
Linus Torvalds c9059598ea Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
  block: add request clone interface (v2)
  floppy: fix hibernation
  ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
  fs/bio.c: add missing __user annotation
  block: prevent possible io_context->refcount overflow
  Add serial number support for virtio_blk, V4a
  block: Add missing bounce_pfn stacking and fix comments
  Revert "block: Fix bounce limit setting in DM"
  cciss: decode unit attention in SCSI error handling code
  cciss: Remove no longer needed sendcmd reject processing code
  cciss: change SCSI error handling routines to work with interrupts enabled.
  cciss: separate error processing and command retrying code in sendcmd_withirq_core()
  cciss: factor out fix target status processing code from sendcmd functions
  cciss: simplify interface of sendcmd() and sendcmd_withirq()
  cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
  cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
  block: needs to set the residual length of a bidi request
  Revert "block: implement blkdev_readpages"
  block: Fix bounce limit setting in DM
  Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
  ...

Manually fix conflicts with tracing updates in:
	block/blk-sysfs.c
	drivers/ide/ide-atapi.c
	drivers/ide/ide-cd.c
	drivers/ide/ide-floppy.c
	drivers/ide/ide-tape.c
	include/trace/events/block.h
	kernel/trace/blktrace.c
2009-06-11 11:10:35 -07:00
Linus Torvalds 27951daa71 Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (28 commits)
  ide-tape: fix debug call
  alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC
  ide-dma: don't reset request fields on dma_timeout_retry()
  ide: drop rq->data handling from ide_map_sg()
  ide-atapi: kill unused fields and callbacks
  ide-tape: simplify read/write functions
  ide-tape: use byte size instead of sectors on rw issue functions
  ide-tape: unify r/w init paths
  ide-tape: kill idetape_bh
  ide-tape: use standard data transfer mechanism
  ide-tape: use single continuous buffer
  ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len
  ide-tape,floppy: fix failed command completion after request sense
  ide-pm: don't abuse rq->data
  ide-cd,atapi: use bio for internal commands
  ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer
  ide-cd: convert to using generic sense request
  ide: add helpers for preparing sense requests
  ide-cd: don't abuse rq->buffer
  ide-atapi: don't abuse rq->buffer
  ...
2009-06-11 10:00:03 -07:00
Kiyoshi Ueda b0fd271d5f block: add request clone interface (v2)
This patch adds the following 2 interfaces for request-stacking drivers:

  - blk_rq_prep_clone(struct request *clone, struct request *orig,
		      struct bio_set *bs, gfp_t gfp_mask,
		      int (*bio_ctr)(struct bio *, struct bio*, void *),
		      void *data)
      * Clones bios in the original request to the clone request
        (bio_ctr is called for each cloned bios.)
      * Copies attributes of the original request to the clone request.
        The actual data parts (e.g. ->cmd, ->buffer, ->sense) are not
        copied.

  - blk_rq_unprep_clone(struct request *clone)
      * Frees cloned bios from the clone request.

Request stacking drivers (e.g. request-based dm) need to make a clone
request for a submitted request and dispatch it to other devices.

To allocate request for the clone, request stacking drivers may not
be able to use blk_get_request() because the allocation may be done
in an irq-disabled context.
So blk_rq_prep_clone() takes a request allocated by the caller
as an argument.

For each clone bio in the clone request, request stacking drivers
should be able to set up their own completion handler.
So blk_rq_prep_clone() takes a callback function which is called
for each clone bio, and a pointer for private data which is passed
to the callback.

NOTE:
blk_rq_prep_clone() doesn't copy any actual data of the original
request.  Pages are shared between original bios and cloned bios.
So caller must not complete the original request before the clone
request.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-11 13:11:05 +02:00
Linus Torvalds 8623661180 Merge branch 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
  Revert "x86, bts: reenable ptrace branch trace support"
  tracing: do not translate event helper macros in print format
  ftrace/documentation: fix typo in function grapher name
  tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
  tracing: add protection around module events unload
  tracing: add trace_seq_vprint interface
  tracing: fix the block trace points print size
  tracing/events: convert block trace points to TRACE_EVENT()
  ring-buffer: fix ret in rb_add_time_stamp
  ring-buffer: pass in lockdep class key for reader_lock
  tracing: add annotation to what type of stack trace is recorded
  tracing: fix multiple use of __print_flags and __print_symbolic
  tracing/events: fix output format of user stack
  tracing/events: fix output format of kernel stack
  tracing/trace_stack: fix the number of entries in the header
  ring-buffer: discard timestamps that are at the start of the buffer
  ring-buffer: try to discard unneeded timestamps
  ring-buffer: fix bug in ring_buffer_discard_commit
  ftrace: do not profile functions when disabled
  tracing: make trace pipe recognize latency format flag
  ...
2009-06-10 19:53:40 -07:00
Nikanth Karthikesan d9c7d394a8 block: prevent possible io_context->refcount overflow
Currently io_context has an atomic_t(32-bit) as refcount.  In the case of
cfq, for each device against whcih a task does I/O, a reference to the
io_context would be taken.  And when there are multiple process sharing
io_contexts(CLONE_IO) would also have a reference to the same io_context.

Theoretically the possible maximum number of processes sharing the same
io_context + the number of disks/cfq_data referring to the same io_context
can overflow the 32-bit counter on a very high-end machine.

Even though it is an improbable case, let us make it atomic_long_t.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-10 23:07:15 +02:00
Li Zefan 55782138e4 tracing/events: convert block trace points to TRACE_EVENT()
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:

  - zero-copy and per-cpu splice() tracing
  - binary tracing without printf overhead
  - structured logging records exposed under /debug/tracing/events
  - trace events embedded in function tracer output and other plugins
  - user-defined, per tracepoint filter expressions
  ...

Cons:

  - no dev_t info for the output of plug, unplug_timer and unplug_io events.
    no dev_t info for getrq and sleeprq events if bio == NULL.
    no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.

    This is mainly because we can't get the deivce from a request queue.
    But this may change in the future.

  - A packet command is converted to a string in TP_assign, not TP_print.
    While blktrace do the convertion just before output.

    Since pc requests should be rather rare, this is not a big issue.

  - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
    has a unique format, which means we have some unused data in a trace entry.

    The overhead is minimized by using __dynamic_array() instead of __array().

I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:

      dd                   dd + ioctl blktrace       dd + TRACE_EVENT (splice)
1     7.36s, 42.7 MB/s     7.50s, 42.0 MB/s          7.41s, 42.5 MB/s
2     7.43s, 42.3 MB/s     7.48s, 42.1 MB/s          7.43s, 42.4 MB/s
3     7.38s, 42.6 MB/s     7.45s, 42.2 MB/s          7.41s, 42.5 MB/s

So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.

And the binary output of TRACE_EVENT is much smaller than blktrace:

 # ls -l -h
 -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out

Following are some comparisons between TRACE_EVENT and blktrace:

plug:
  kjournald-480   [000]   303.084981: block_plug: [kjournald]
  kjournald-480   [000]   303.084981:   8,0    P   N [kjournald]

unplug_io:
  kblockd/0-118   [000]   300.052973: block_unplug_io: [kblockd/0] 1
  kblockd/0-118   [000]   300.052974:   8,0    U   N [kblockd/0] 1

remap:
  kjournald-480   [000]   303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
  kjournald-480   [000]   303.085043:   8,0    A   W 102736992 + 8 <- (8,8) 33384

bio_backmerge:
  kjournald-480   [000]   303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
  kjournald-480   [000]   303.085086:   8,0    M   W 102737032 + 8 [kjournald]

getrq:
  kjournald-480   [000]   303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084975:   8,0    G   W 102736984 + 8 [kjournald]

  bash-2066  [001]  1072.953770:   8,0    G   N [bash]
  bash-2066  [001]  1072.953773: block_getrq: 0,0 N 0 + 0 [bash]

rq_complete:
  konsole-2065  [001]   300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
  konsole-2065  [001]   300.053191:   8,0    C   W 103669040 + 16 [0]

  ksoftirqd/1-7   [001]  1072.953811:   8,0    C   N (5a 00 08 00 00 00 00 00 24 00) [0]
  ksoftirqd/1-7   [001]  1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]

rq_insert:
  kjournald-480   [000]   303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084986:   8,0    I   W 102736984 + 8 [kjournald]

Changelog from v2 -> v3:

- use the newly introduced __dynamic_array().

Changelog from v1 -> v2:

- use __string() instead of __array() to minimize the memory required
  to store hex dump of rq->cmd().

- support large pc requests.

- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.

- some cleanups.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 12:34:23 -04:00
FUJITA Tomonori c1d4c41f2f bsg: setting rq->bio to NULL
Due to commit 1cd96c242a ("block: WARN
in __blk_put_request() for potential bio leak"), BSG SMP requests get
the false warnings:

WARNING: at block/blk-core.c:1068 __blk_put_request+0x52/0xc0()

This sets rq->bio to NULL to avoid that false warnings.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09 15:17:37 +02:00
Martin K. Petersen 77634f33d4 block: Add missing bounce_pfn stacking and fix comments
DM no longer needs to set limits explicitly when calling blk_stack_limits.
Let the latter automatically deal with bounce_pfn scaling.

Fix kerneldoc variable names.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09 06:23:22 +02:00
Jens Axboe 9df1bb9b51 Revert "block: Fix bounce limit setting in DM"
This reverts commit a05c0205ba.

DM doesn't need to access the bounce_pfn directly.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09 06:22:57 +02:00
FUJITA Tomonori dbb66c4be0 block: needs to set the residual length of a bidi request
Tejun's "block: set rq->resid_len to blk_rq_bytes() on issue" patch
seems to be incomplete; It doesn't set rq->resid_len to blk_rq_bytes()
for a bidi request (req->next_rq). As a result, all bidi users are
broken.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09 05:47:10 +02:00
Martin K. Petersen a05c0205ba block: Fix bounce limit setting in DM
blk_queue_bounce_limit() is more than a wrapper about the request queue
limits.bounce_pfn variable.  Introduce blk_queue_bounce_pfn() which can
be called by stacking drivers that wish to set the bounce limit
explicitly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-03 09:33:18 +02:00
Kiyoshi Ueda 53c663ce0f block: fix a possible oops on elv_abort_queue()
I found one more mis-conversion to the 'request is always dequeued
when completing' model in elv_abort_queue() during code inspection.
Although I haven't hit any problem caused by this mis-conversion yet
and just done compile/boot test, please apply if you have no problem.

Request must be dequeued when it completes.
However, elv_abort_queue() completes requests without dequeueing.
This will cause oops in the __blk_end_request_all().
This patch fixes the oops.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-02 08:44:01 +02:00
James Bottomley c143dc903d block: fix an oops on BLKPREP_KILL
Doing a bit of torture testing, I ran across a BUG in the block
subsystem (at blk-core.c:2048): the test for if the request is queued.

It turns out the trigger was a BLKPREP_KILL coming out of the SCSI prep
function.  Currently for BLKPREP_KILL requests, we send them straight
into __blk_end_request_all() with an error, but they've never been
dequeued, so they trip the bug.  Fix this by starting requests before
killing them.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-30 06:43:49 +02:00
Mike Snitzer 5d85d3247c block: export blk_stack_limits()
DM needs to use blk_stack_limits(), so it needs to be exported.

Acked-by: Martin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-28 11:04:53 +02:00
Kiyoshi Ueda 3c4198e874 block: fix no diskstat problem
The commit below in 2.6-block/for-2.6.31 causes no diskstat problem
because the blk_discard_rq() check was added with '&&'.
It should be 'blk_fs_request() || blk_discard_rq()'.
This patch does it and fixes the no diskstat problem.
Please review and apply.

------ /proc/diskstat without this patch -------------------------------------
   8       0 sda 0 0 0 0 0 0 0 0 0 0 0
------------------------------------------------------------------------------

----- /proc/diskstat with this patch applied ---------------------------------
   8       0 sda 4186 303 373621 61600 9578 3859 107468 169479 2 89755 231059
------------------------------------------------------------------------------

--------------------------------------------------------------------------
commit c69d48540c
Author: Jens Axboe <jens.axboe@oracle.com>
Date:   Fri Apr 24 08:12:19 2009 +0200

    block: include discard requests in IO accounting

    We currently don't do merging on discard requests, but we potentially
    could. If we do, then we need to include discard requests in the IO
    accounting, or merging would end up decrementing in_flight IO counters
    for an IO which never incremented them.

    So enable accounting for discard requests.

<snip>

 static inline int blk_do_io_stat(struct request *rq)
 {
-       return rq->rq_disk && blk_rq_io_stat(rq) && blk_fs_request(rq);
+       return rq->rq_disk && blk_rq_io_stat(rq) && blk_fs_request(rq) &&
+               blk_discard_rq(rq);
 }
--------------------------------------------------------------------------

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-27 14:50:02 +02:00
James Bottomley ba396a6c10 block: fix oops with block tag queueing
commit e8939a50466fd963eb1ba9118c34b9ffb7ff6aa6
Author: Tejun Heo <tj@kernel.org>
Date:   Fri May 8 11:54:16 2009 +0900

    block: implement and enforce request peek/start/fetch

Added a BUG_ON(blk_queued_rq(req)) to the top of blk_finish_req().
Unfortunately, this checks whether req->queuelist is empty.  This list
is doing double duty both as the queue list and the tag list, so tagged
requests come in here with this not empty and boom (the tag list is
emptied by blk_queue_end_tag() lower down).

Fix this by moving the BUG_ON to below the end tag we also seem
vulnerable to this in blk_requeue_request() as well.  I think all uses
of blk_queued_rq() need auditing because the check is clearly wrong in
the tagged case.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-27 14:17:08 +02:00
Martin K. Petersen c72758f337 block: Export I/O topology for block devices and partitions
To support devices with physical block sizes bigger than 512 bytes we
need to ensure proper alignment.  This patch adds support for exposing
I/O topology characteristics as devices are stacked.

  logical_block_size is the smallest unit the device can address.

  physical_block_size indicates the smallest I/O the device can write
  without incurring a read-modify-write penalty.

  The io_min parameter is the smallest preferred I/O size reported by
  the device.  In many cases this is the same as the physical block
  size.  However, the io_min parameter can be scaled up when stacking
  (RAID5 chunk size > physical block size).

  The io_opt characteristic indicates the optimal I/O size reported by
  the device.  This is usually the stripe width for arrays.

  The alignment_offset parameter indicates the number of bytes the start
  of the device/partition is offset from the device's natural alignment.
  Partition tools and MD/DM utilities can use this to pad their offsets
  so filesystems start on proper boundaries.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:55 +02:00
Martin K. Petersen cd43e26f07 block: Expose stacked device queues in sysfs
Currently stacking devices do not have a queue directory in sysfs.
However, many of the I/O characteristics like sector size, maximum
request size, etc. are queue properties.

This patch enables the queue directory for MD/DM devices.  The elevator
code has been modified to deal with queues that do not have an I/O
scheduler.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:55 +02:00
Martin K. Petersen 025146e13b block: Move queue limits to an embedded struct
To accommodate stacking drivers that do not have an associated request
queue we're moving the limits to a separate, embedded structure.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:55 +02:00
Martin K. Petersen ae03bf639a block: Use accessor functions for queue limits
Convert all external users of queue limits to using wrapper functions
instead of poking the request queue variables directly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Martin K. Petersen e1defc4ff0 block: Do away with the notion of hardsect_size
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case.  The
sector size will be 4KB but the logical block size will remain
512-bytes.  Hence we need to distinguish between the physical block size
and the logical ditto.

This patch renames hardsect_size to logical_block_size.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Jens Axboe e4b636366c Merge branch 'master' into for-2.6.31
Conflicts:
	drivers/block/hd.c
	drivers/block/mg_disk.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 20:25:34 +02:00
Jens Axboe 0a7ae2ff0d block: change the tag sync vs async restriction logic
Make them fully share the tag space, but disallow async requests using
the last any two slots.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-20 08:54:31 +02:00
Jens Axboe 53674ac5a9 block: add warning to blk_make_request()
Add a note about how one needs to be careful when setting up these bio
chains.

Extracted from Boaz's updated patch.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19 19:52:35 +02:00
Boaz Harrosh a411f4bbb8 block: Un-export blk_rq_append_bio
OSD was the last in-tree user of blk_rq_append_bio(). Now
that it is fixed blk_rq_append_bio is un-exported and
is only used internally by block layer.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19 12:14:56 +02:00
Boaz Harrosh 79eb63e9e5 block: Add blk_make_request(), takes bio, returns a request
New block API:
given a struct bio allocates a new request. This is the parallel of
generic_make_request for BLOCK_PC commands users.

The passed bio may be a chained-bio. The bio is bounced if needed
inside the call to this member.

This is in the effort of un-exporting blk_rq_append_bio().

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
CC: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19 12:14:56 +02:00