The descriptor list is a shared resource across all of the transmit queues, and
the locking mechanism used today only protects concurrency across a given
transmit queue between the transmit and reclaiming. This creates an opportunity
for the SYSTEMPORT hardware to work on corrupted descriptors if we have
multiple producers at once which is the case when using multiple transmit
queues.
This was particularly noticeable when using multiple flows/transmit queues and
it showed up in interesting ways in that UDP packets would get a correct UDP
header checksum being calculated over an incorrect packet length. Similarly TCP
packets would get an equally correct checksum computed by the hardware over an
incorrect packet length.
The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges
when the driver produces a new descriptor anytime it writes to the
WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to
re-organize its descriptors and it is possible that concurrent TX queues
eventually break this internal allocation scheme to the point where the
length/status part of the descriptor gets used for an incorrect data buffer.
The fix is to impose a global serialization for all TX queues in the short
section where we are writing to the WRITE_PORT_{HI,LO} registers which solves
the corruption even with multiple concurrent TX queues being used.
Fixes: 80105befdb ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In nginx/wrk benchmark, there's a hung problem with high probability
on case likes that: (client will last several minutes to exit)
server: smc_run nginx
client: smc_run wrk -c 10000 -t 1 http://server
Client hangs with the following backtrace:
0 [ffffa7ce8Of3bbf8] __schedule at ffffffff9f9eOd5f
1 [ffffa7ce8Of3bc88] schedule at ffffffff9f9eløe6
2 [ffffa7ce8Of3bcaO] schedule_timeout at ffffffff9f9e3f3c
3 [ffffa7ce8Of3bd2O] wait_for_common at ffffffff9f9el9de
4 [ffffa7ce8Of3bd8O] __flush_work at ffffffff9fOfeOl3
5 [ffffa7ce8øf3bdfO] smc_release at ffffffffcO697d24 [smc]
6 [ffffa7ce8Of3be2O] __sock_release at ffffffff9f8O2e2d
7 [ffffa7ce8Of3be4ø] sock_close at ffffffff9f8ø2ebl
8 [ffffa7ce8øf3be48] __fput at ffffffff9f334f93
9 [ffffa7ce8Of3be78] task_work_run at ffffffff9flOlff5
10 [ffffa7ce8Of3beaO] do_exit at ffffffff9fOe5Ol2
11 [ffffa7ce8Of3bflO] do_group_exit at ffffffff9fOe592a
12 [ffffa7ce8Of3bf38] __x64_sys_exit_group at ffffffff9fOe5994
13 [ffffa7ce8Of3bf4O] do_syscall_64 at ffffffff9f9d4373
14 [ffffa7ce8Of3bfsO] entry_SYSCALL_64_after_hwframe at ffffffff9fa0007c
This issue dues to flush_work(), which is used to wait for
smc_connect_work() to finish in smc_release(). Once lots of
smc_connect_work() was pending or all executing work dangling,
smc_release() has to block until one worker comes to free, which
is equivalent to wait another smc_connnect_work() to finish.
In order to fix this, There are two changes:
1. For those idle smc_connect_work(), cancel it from the workqueue; for
executing smc_connect_work(), waiting for it to finish. For that
purpose, replace flush_work() with cancel_work_sync().
2. Since smc_connect() hold a reference for passive closing, if
smc_connect_work() has been cancelled, release the reference.
Fixes: 24ac3a08e6 ("net/smc: rebuild nonblocking connect")
Reported-by: Tony Lu <tonylu@linux.alibaba.com>
Tested-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/1639571361-101128-1-git-send-email-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This contains a single build fix without which ARM allmodconfig builds
are broken if -Werror is enabled.
-----BEGIN PGP SIGNATURE-----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=bWVy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2ABQ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
soc/tegra: Fixes for v5.16-rc6
This contains a single build fix without which ARM allmodconfig builds
are broken if -Werror is enabled.
* tag 'tegra-for-5.16-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Fix bitwise vs. logical OR warning
Link: https://lore.kernel.org/r/20211215162618.3568474-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When printing netdev features %pNF already takes care of the 0x prefix,
remove the explicit one.
Fixes: 6413139dfc ("skbuff: increase verbosity when dumping skb data")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We found the stat of rx drops for small pkts does not increment when
build_skb fail, it's not coherent with other mode's rx drops stat.
Signed-off-by: Wenliang Wang <wangwenliang.1995@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Debug print uses invalid check to detect if speed is unforced:
(speed != SPEED_UNFORCED) should be used instead of (!speed).
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Eremeev <Axtone4all@yandex.ru>
Fixes: 96a2b40c7b ("net: dsa: mv88e6xxx: add port's MAC speed setter")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The return value of kmalloc() needs to be checked.
To avoid use in efx_nic_update_stats() in case of the failure of alloc.
Fixes: b593b6f1b4 ("sfc_ef100: statistics gathering")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KASAN reports an out-of-bounds read in rk_gmac_setup on the line:
while (ops->regs[i]) {
This happens for most platforms since the regs flexible array member is
empty, so the memory after the ops structure is being read here. It
seems that mostly this happens to contain zero anyway, so we get lucky
and everything still works.
To avoid adding redundant data to nearly all the ops structures, add a
new flag to indicate whether the regs field is valid and avoid this loop
when it is not.
Fixes: 3bb3d6b1c1 ("net: stmmac: Add RK3566/RK3568 SoC support")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-15
This series contains updates to igb, igbvf, igc and ixgbe drivers.
Karen moves checks for invalid VF MAC filters to occur earlier for
igb.
Letu Ren fixes a double free issue in igbvf probe.
Sasha fixes incorrect min value being used when calculating for max for
igc.
Robert Schlabbach adds documentation on enabling NBASE-T support for
ixgbe.
Cyril Novikov adds missing initialization of MDIO bus speed for ixgbe.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Packet sockets may switch ring versions. Avoid misinterpreting state
between versions, whose fields share a union. rx_owner_map is only
allocated with a packet ring (pg_vec) and both are swapped together.
If pg_vec is NULL, meaning no packet ring was allocated, then neither
was rx_owner_map. And the field may be old state from a tpacket_v3.
Fixes: 61fad6816f ("net/packet: tpacket_rcv: avoid a producer race condition")
Reported-by: Syzbot <syzbot+1ac0994a0a0c55151121@syzkaller.appspotmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211215143937.106178-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
since it may cause a potential kernel information leak issue, as follows:
1. nsim_bpf_map_alloc calls nsim_map_alloc_elem to allocate elements for
a new map.
2. nsim_map_alloc_elem uses kmalloc to allocate map's value, but doesn't
zero it.
3. A user application can use IOCTL BPF_MAP_LOOKUP_ELEM to get specific
element's information in the map.
4. The kernel function map_lookup_elem will call bpf_map_copy_value to get
the information allocated at step-2, then use copy_to_user to copy to the
user buffer.
This can only leak information for an array map.
Fixes: 395cacb5f1 ("netdevsim: bpf: support fake map offload")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com>
Link: https://lore.kernel.org/r/20211215111530.72103-1-tcs.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unfortunately, with the blamed commit I also added a side effect in the
ethtool stats shown. Because I added two more fields in the per channel
structure without verifying if its size is used in any way, part of the
ethtool statistics were off by 2.
Fix this by not looking up the size of the structure but instead on a
fixed value kept in a macro.
Fixes: fc398bec03 ("net: dpaa2: add adaptive interrupt coalescing")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20211215105831.290070-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During disconnect USB-3 ports often go via SS.Inactive link error state
before the missing terminations are noticed, and link finally goes to
RxDetect state
Avoid immediately warm-resetting ports in SS.Inactive state.
Let ports settle for a while and re-read the link status a few times 20ms
apart to see if the ports transitions out of SS.Inactive.
According to USB 3.x spec 7.5.2, a port in SS.Inactive should
automatically check for missing far-end receiver termination every
12 ms (SSInactiveQuietTimeout)
The futile multiple warm reset retries of a disconnected device takes
a lot of time, also the resetting of a removed devices has caused cases
where the reset bit got stuck for a long time on xHCI roothub.
This lead to issues in detecting new devices connected to the same port
shortly after.
Tested-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211210111653.1378381-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the missing unlock before return from function xenhcd_urb_request_done()
and xenhcd_conn_notify() in the error handling case.
Fixes: 494ed3997d ("usb: Introduce Xen pvUSB frontend (xen hcd)")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211215035805.375244-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of probe defer, a message is logged for resets and clocks. Use
dev_err_probe to log the message only when error code is not -517.
Simplify phy, regulators and drd probe defer handling with dev_err_probe().
Then, take benefit of devices_deferred debugfs in case of probe deferral.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211207120829.266837-1-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In current design, when the tcpm port is unregisterd, the kthread_worker
will be destroyed in the last step. Inside the kthread_destroy_worker(),
the worker will flush all the works and wait for them to end. However, if
one of the works calls hrtimer_start(), this hrtimer will be pending until
timeout even though tcpm port is removed. Once the hrtimer timeout, many
strange kernel dumps appear.
Thus, we can first complete kthread_destroy_worker(), then cancel all the
hrtimers. This will guarantee that no hrtimer is pending at the end.
Fixes: 3ed8e1c2ac ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events")
cc: <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20211209101507.499096-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch puts content of cdnsp_gadget_pullup function inside
spin_lock_irqsave and spin_lock_restore section.
This construction is required here to keep the data consistency,
otherwise some data can be changed e.g. from interrupt context.
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Reported-by: Ken (Jian) He <jianhe@ambarella.com>
cc: <stable@vger.kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
--
Changelog:
v2:
- added disable_irq/enable_irq as sugester by Peter Chen
drivers/usb/cdns3/cdnsp-gadget.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20211214045527.26823-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This device doesn't work well with LPM, losing connectivity intermittently.
Disable LPM to resolve the issue.
Reviewed-by: <markpearson@lenovo.com>
Signed-off-by: Jimmy Wang <wangjm221@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211214012652.4898-1-wangjm221@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AMD's Yellow Carp platform has few more XHCI controllers,
enable the runtime power management support for the same.
Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211215093216.1839065-1-Nehal-Bakulchandra.shah@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit fab8a02b73 ("serial: 8250_fintek: Enable high speed mode on Fintek F81866")
introduced support to use high baudrate with Fintek SuperIO UARTs. It'll
change clocksources when the UART probed.
But when user add kernel parameter "console=ttyS0,115200 console=tty0" to make
the UART as console output, the console will output garbled text after the
following kernel message.
[ 3.681188] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
The issue is occurs in following step:
probe_setup_port() -> fintek_8250_goto_highspeed()
It change clocksource from 115200 to 921600 with wrong time, it should change
clocksource in set_termios() not in probed. The following 3 patches are
implemented change clocksource in fintek_8250_set_termios().
Commit 58178914ae ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81216H")
Commit 195638b6d4 ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81866")
Commit 423d9118c6 ("serial: 8250_fintek: Add F81966 Support")
Due to the high baud rate had implemented above 3 patches and the patch
Commit fab8a02b73 ("serial: 8250_fintek: Enable high speed mode on Fintek F81866")
is bugged, So this patch will remove it.
Fixes: fab8a02b73 ("serial: 8250_fintek: Enable high speed mode on Fintek F81866")
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Link: https://lore.kernel.org/r/20211215075835.2072-1-hpeter+linux_kernel@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot is reporting that an unprivileged user who logged in from tty
console can crash the system using a reproducer shown below [1], for
n_hdlc_tty_wakeup() is synchronously calling n_hdlc_send_frames().
----------
#include <sys/ioctl.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
const int disc = 0xd;
ioctl(1, TIOCSETD, &disc);
while (1) {
ioctl(1, TCXONC, 0);
write(1, "", 1);
ioctl(1, TCXONC, 1); /* Kernel panic - not syncing: scheduling while atomic */
}
}
----------
Linus suspected that "struct tty_ldisc"->ops->write_wakeup() must not
sleep, and Jiri confirmed it from include/linux/tty_ldisc.h. Thus, defer
n_hdlc_send_frames() from n_hdlc_tty_wakeup() to a WQ context like
net/nfc/nci/uart.c does.
Link: https://syzkaller.appspot.com/bug?extid=5f47a8cea6a12b77a876 [1]
Reported-by: syzbot <syzbot+5f47a8cea6a12b77a876@syzkaller.appspotmail.com>
Cc: stable <stable@vger.kernel.org>
Analyzed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Confirmed-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/40de8b7e-a3be-4486-4e33-1b1d1da452f8@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MDIO bus speed must be initialized before talking to the PHY the first
time in order to avoid talking to it using a speed that the PHY doesn't
support.
This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on
Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network
plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined
with the 10Gb network results in a 24MHz MDIO speed, which is apparently
too fast for the connected PHY. PHY register reads over MDIO bus return
garbage, leading to initialization failure.
Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using
the following setup:
* Use an Atom C3000 family system with at least one X552 LAN on the SoC
* Disable PXE or other BIOS network initialization if possible
(the interface must not be initialized before Linux boots)
* Connect a live 10Gb Ethernet cable to an X550 port
* Power cycle (not reset, doesn't always work) the system and boot Linux
* Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17
Fixes: e84db72727 ("ixgbe: Introduce function to control MDIO speed")
Signed-off-by: Cyril Novikov <cnovikov@lynx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 25058d1c72 ("dm integrity: use bvec_kmap_local in
__journal_read_write") didn't account for __journal_read_write() later
adding the biovec's bv_offset. As such using bvec_kmap_local() caused
the start of the biovec to be skipped.
Trivial test that illustrates data corruption:
# integritysetup format /dev/pmem0
# integritysetup open /dev/pmem0 integrityroot
# mkfs.xfs /dev/mapper/integrityroot
...
bad magic number
bad magic number
Metadata corruption detected at xfs_sb block 0x0/0x1000
libxfs_writebufr: write verifer failed on xfs_sb bno 0x0/0x1000
releasing dirty buffer (bulk) to free list!
Fix this by using kmap_local_page() instead of bvec_kmap_local() in
__journal_read_write().
Fixes: 25058d1c72 ("dm integrity: use bvec_kmap_local in __journal_read_write")
Reported-by: Tony Asleson <tasleson@redhat.com>
Reviewed-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit a296d665ea ("ixgbe: Add ethtool support to enable 2.5 and 5.0
Gbps support") introduced suppression of the advertisement of NBASE-T
speeds by default, according to Todd Fujinaka to accommodate customers
with network switches which could not cope with advertised NBASE-T
speeds, as posted in the E1000-devel mailing list:
https://sourceforge.net/p/e1000/mailman/message/37106269/
However, the suppression was not documented at all, nor was how to
enable NBASE-T support.
Properly document the NBASE-T suppression and how to enable NBASE-T
support.
Fixes: a296d665ea ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support")
Reported-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The LTR maximum value was incorrectly written using the scale from
the LTR minimum value. This would cause incorrect values to be sent,
in cases where the initial calculation lead to different min/max scales.
Fixes: 707abf0695 ("igc: Add initial LTR support")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In `igbvf_probe`, if register_netdev() fails, the program will go to
label err_hw_init, and then to label err_ioremap. In free_netdev() which
is just below label err_ioremap, there is `list_for_each_entry_safe` and
`netif_napi_del` which aims to delete all entries in `dev->napi_list`.
The program has added an entry `adapter->rx_ring->napi` which is added by
`netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has
been freed below label err_hw_init. So this a UAF.
In terms of how to patch the problem, we can refer to igbvf_remove() and
delete the entry before `adapter->rx_ring`.
The KASAN logs are as follows:
[ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450
[ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366
[ 35.128360]
[ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14
[ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 35.131749] Call Trace:
[ 35.132199] dump_stack_lvl+0x59/0x7b
[ 35.132865] print_address_description+0x7c/0x3b0
[ 35.133707] ? free_netdev+0x1fd/0x450
[ 35.134378] __kasan_report+0x160/0x1c0
[ 35.135063] ? free_netdev+0x1fd/0x450
[ 35.135738] kasan_report+0x4b/0x70
[ 35.136367] free_netdev+0x1fd/0x450
[ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf]
[ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf]
[ 35.138751] local_pci_probe+0x13c/0x1f0
[ 35.139461] pci_device_probe+0x37e/0x6c0
[ 35.165526]
[ 35.165806] Allocated by task 366:
[ 35.166414] ____kasan_kmalloc+0xc4/0xf0
[ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf]
[ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf]
[ 35.168866] local_pci_probe+0x13c/0x1f0
[ 35.169565] pci_device_probe+0x37e/0x6c0
[ 35.179713]
[ 35.179993] Freed by task 366:
[ 35.180539] kasan_set_track+0x4c/0x80
[ 35.181211] kasan_set_free_info+0x1f/0x40
[ 35.181942] ____kasan_slab_free+0x103/0x140
[ 35.182703] kfree+0xe3/0x250
[ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf]
[ 35.184040] local_pci_probe+0x13c/0x1f0
Fixes: d4e0fe01a3 (igbvf: add new driver to support 82576 virtual functions)
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move checking condition of VF MAC filter before clearing
or adding MAC filter to VF to prevent potential blackout caused
by removal of necessary and working VF's MAC filter.
Fixes: 1b8b062a99 ("igb: add VF trust infrastructure")
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
accounting fix and two fixups to appease static checkers.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmG54aMTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzixPBB/4rf0d+oJbBNQQIjTVSO09G9A5pxnU1
CY++W5xppv2hQQX8Czh8iLLYSP3tRh+1xpAlKT+DFsRI3GTh5tXiPf7Mpu76noo3
UAKxiz5NmtqiwrHKZtpsQEJlmwtAFa+qFVJIOiqq1l+gFeiYMueoFEGDgdSCLJrE
P6TL9CZx06Yf+fef7hJnXKR3YM0qras1jV6Adpvu+2g/ciaThzJF3YdyAFYFp7nl
sGnPTXlJ1DDIsiOAgj0oGeQICpjQJOSGNZtxVjhJx5dJjqgKjim0V4MIShqsW/tg
n8LzjrdGh/lR2QfCgOfYmvFrVTeb9QQyF57sT034rGrP6VXlzCkALPi3
=FQag
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.16-rc6' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"An SGID directory handling fix (marked for stable), a metrics
accounting fix and two fixups to appease static checkers"
* tag 'ceph-for-5.16-rc6' of git://github.com/ceph/ceph-client:
ceph: fix up non-directory creation in SGID directories
ceph: initialize pathlen variable in reconnect_caps_cb
ceph: initialize i_size variable in ceph_sync_read
ceph: fix duplicate increment of opened_inodes metric
- Add missing handling of R_390_PLT32DBL relocation type in
arch_kexec_apply_relocations_add(). Clang and the upcoming gcc 11.3
generate such relocation entries, which our relocation code silently
ignores, and which finally will result in an endless loop within the
purgatory code in case of kexec.
- Add proper handling of errors and print error messages when applying
relocations
- Fix duplicate tracking of irq nesting level in entry code
- Let recordmcount.pl also look for jgnop mnemonic. Starting with binutils
2.37 objdump emits a jgnop mnemonic instead of brcl, which breaks mcount
location detection. This is only a problem if used with compilers older
than gcc 9, since with gcc 9 and newer compilers recordmcount.pl is not
used anymore.
- Remove preempt_disable()/preempt_enable() pair in kprobe_ftrace_handler()
which was done for all architectures except for s390.
- Update defconfig
-----BEGIN PGP SIGNATURE-----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=NJ9M
-----END PGP SIGNATURE-----
Merge tag 's390-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Add missing handling of R_390_PLT32DBL relocation type in
arch_kexec_apply_relocations_add(). Clang and the upcoming gcc 11.3
generate such relocation entries, which our relocation code silently
ignores, and which finally will result in an endless loop within the
purgatory code in case of kexec.
- Add proper handling of errors and print error messages when applying
relocations
- Fix duplicate tracking of irq nesting level in entry code
- Let recordmcount.pl also look for jgnop mnemonic. Starting with
binutils 2.37 objdump emits a jgnop mnemonic instead of brcl, which
breaks mcount location detection. This is only a problem if used with
compilers older than gcc 9, since with gcc 9 and newer compilers
recordmcount.pl is not used anymore.
- Remove preempt_disable()/preempt_enable() pair in
kprobe_ftrace_handler() which was done for all architectures except
for s390.
- Update defconfig
* tag 's390-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
recordmcount.pl: look for jgnop instruction as well as bcrl on s390
s390/entry: fix duplicate tracking of irq nesting level
s390: enable switchdev support in defconfig
s390/kexec: handle R_390_PLT32DBL rela in arch_kexec_apply_relocations_add()
s390/ftrace: remove preempt_disable()/preempt_enable() pair
s390/kexec_file: fix error handling when applying relocations
s390/kexec_file: print some more error messages
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmG46nsTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXqmcB/9Gsue8sFb5XEkXWTdPxJqKyO3eKiMh
vTraHVdxMs5chimrRuRqpCT8Qfh2ZQ+C9PbrLFjach0jbLCLjQzspBB/+yDZaX8W
XAPQsW+0Q3EMN2uHsb+We1g83w0J4HHXWfVFfwKYbRtrUwpzgILcnLTFDNpSgoE2
xRp1KD/nAt3StebRYPAjcSGSq1i5FnJm7yXCCoRQRku5RdBr7JQrps2pvntjrbDU
izhnXARwODAGAWrqb4udEeApBdJ82P50gJIyoyvvtjJdIM3NFm+Q7yS8xC+ReD8k
agOpUu21MFrAH8Chj2EtkpHg+ZPv1JhFMlSJKSEi9CkEo8FI90NENXnW
=M2xt
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20211214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fix from Wei Liu:
"Build fix from Randy Dunlap"
* tag 'hyperv-fixes-signed-20211214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv: utils: add PTP_1588_CLOCK to Kconfig to fix build
If the audit daemon were ever to get stuck in a stopped state the
kernel's kauditd_thread() could get blocked attempting to send audit
records to the userspace audit daemon. With the kernel thread
blocked it is possible that the audit queue could grow unbounded as
certain audit record generating events must be exempt from the queue
limits else the system enter a deadlock state.
This patch resolves this problem by lowering the kernel thread's
socket sending timeout from MAX_SCHEDULE_TIMEOUT to HZ/10 and tweaks
the kauditd_send_queue() function to better manage the various audit
queues when connection problems occur between the kernel and the
audit daemon. With this patch, the backlog may temporarily grow
beyond the defined limits when the audit daemon is stopped and the
system is under heavy audit pressure, but kauditd_thread() will
continue to make progress and drain the queues as it would for other
connection problems. For example, with the audit daemon put into a
stopped state and the system configured to audit every syscall it
was still possible to shutdown the system without a kernel panic,
deadlock, etc.; granted, the system was slow to shutdown but that is
to be expected given the extreme pressure of recording every syscall.
The timeout value of HZ/10 was chosen primarily through
experimentation and this developer's "gut feeling". There is likely
no one perfect value, but as this scenario is limited in scope (root
privileges would be needed to send SIGSTOP to the audit daemon), it
is likely not worth exposing this as a tunable at present. This can
always be done at a later date if it proves necessary.
Cc: stable@vger.kernel.org
Fixes: 5b52330bbf ("audit: fix auditd/kernel connection state tracking")
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When activate_stm_id_vb_detection is enabled, ID and Vbus detection relies
on sensing comparators. This detection needs time to stabilize.
A delay was already applied in dwc2_resume() when reactivating the
detection, but it wasn't done in dwc2_probe().
This patch adds delay after enabling STM ID/VBUS detection. Then, ID state
is good when initializing gadget and host, and avoid to get a wrong
Connector ID Status Change interrupt.
Fixes: a415083a11 ("usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS")
Cc: stable <stable@vger.kernel.org>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211207124510.268841-1-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Szymon rightly pointed out that the previous check for the endpoint
direction in bRequestType was not looking at only the bit involved, but
rather the whole value. Normally this is ok, but for some request
types, bits other than bit 8 could be set and the check for the endpoint
length could not stall correctly.
Fix that up by only checking the single bit.
Fixes: 153a2d7e33 ("USB: gadget: detect too-big endpoint 0 requests")
Cc: Felipe Balbi <balbi@kernel.org>
Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Link: https://lore.kernel.org/r/20211214184621.385828-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new warning in clang points out two instances where boolean
expressions are being used with a bitwise OR instead of logical OR:
drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
reg = tegra_fuse_read_spare(i) |
^~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
reg = tegra_fuse_read_spare(i) |
^~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning
2 warnings generated.
The motivation for the warning is that logical operations short circuit
while bitwise operations do not.
In this instance, tegra_fuse_read_spare() is not semantically returning
a boolean, it is returning a bit value. Use u32 for its return type so
that it can be used with either bitwise or boolean operators without any
warnings.
Fixes: 25cd5a3914 ("ARM: tegra: Add speedo-based process identification")
Link: https://github.com/ClangBuiltLinux/linux/issues/1488
Suggested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The function btrfs_scan_one_device() calls blkdev_get_by_path() and
blkdev_put() to get and release its target block device. However, when
btrfs_sb_log_location_bdev() fails, blkdev_put() is not called and the
block device is left without clean up. This triggered failure of fstests
generic/085. Fix the failure path of btrfs_sb_log_location_bdev() to
call blkdev_put().
Fixes: 12659251ca ("btrfs: implement log-structured superblock for ZONED mode")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When creating a subvolume, at ioctl.c:create_subvol(), if we fail to
insert the new root's root item into the root tree, we are freeing the
metadata extent we reserved for the new root to prevent a metadata
extent leak, as we don't abort the transaction at that point (since
there is nothing at that point that is irreversible).
However we allocated the metadata extent for the new root which we are
creating for the new subvolume, so its delayed reference refers to the
ID of this new root. But when we free the metadata extent we pass the
root of the subvolume where the new subvolume is located to
btrfs_free_tree_block() - this is incorrect because this will generate
a delayed reference that refers to the ID of the parent subvolume's root,
and not to ID of the new root.
This results in a failure when running delayed references that leads to
a transaction abort and a trace like the following:
[3868.738042] RIP: 0010:__btrfs_free_extent+0x709/0x950 [btrfs]
[3868.739857] Code: 68 0f 85 e6 fb ff (...)
[3868.742963] RSP: 0018:ffffb0e9045cf910 EFLAGS: 00010246
[3868.743908] RAX: 00000000fffffffe RBX: 00000000fffffffe RCX: 0000000000000002
[3868.745312] RDX: 00000000fffffffe RSI: 0000000000000002 RDI: ffff90b0cd793b88
[3868.746643] RBP: 000000000e5d8000 R08: 0000000000000000 R09: ffff90b0cd793b88
[3868.747979] R10: 0000000000000002 R11: 00014ded97944d68 R12: 0000000000000000
[3868.749373] R13: ffff90b09afe4a28 R14: 0000000000000000 R15: ffff90b0cd793b88
[3868.750725] FS: 00007f281c4a8b80(0000) GS:ffff90b3ada00000(0000) knlGS:0000000000000000
[3868.752275] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[3868.753515] CR2: 00007f281c6a5000 CR3: 0000000108a42006 CR4: 0000000000370ee0
[3868.754869] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[3868.756228] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[3868.757803] Call Trace:
[3868.758281] <TASK>
[3868.758655] ? btrfs_merge_delayed_refs+0x178/0x1c0 [btrfs]
[3868.759827] __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs]
[3868.761047] btrfs_run_delayed_refs+0x86/0x210 [btrfs]
[3868.762069] ? lock_acquired+0x19f/0x420
[3868.762829] btrfs_commit_transaction+0x69/0xb20 [btrfs]
[3868.763860] ? _raw_spin_unlock+0x29/0x40
[3868.764614] ? btrfs_block_rsv_release+0x1c2/0x1e0 [btrfs]
[3868.765870] create_subvol+0x1d8/0x9a0 [btrfs]
[3868.766766] btrfs_mksubvol+0x447/0x4c0 [btrfs]
[3868.767669] ? preempt_count_add+0x49/0xa0
[3868.768444] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs]
[3868.769639] ? _copy_from_user+0x66/0xa0
[3868.770391] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs]
[3868.771495] btrfs_ioctl+0xd1e/0x35c0 [btrfs]
[3868.772364] ? __slab_free+0x10a/0x360
[3868.773198] ? rcu_read_lock_sched_held+0x12/0x60
[3868.774121] ? lock_release+0x223/0x4a0
[3868.774863] ? lock_acquired+0x19f/0x420
[3868.775634] ? rcu_read_lock_sched_held+0x12/0x60
[3868.776530] ? trace_hardirqs_on+0x1b/0xe0
[3868.777373] ? _raw_spin_unlock_irqrestore+0x3e/0x60
[3868.778280] ? kmem_cache_free+0x321/0x3c0
[3868.779011] ? __x64_sys_ioctl+0x83/0xb0
[3868.779718] __x64_sys_ioctl+0x83/0xb0
[3868.780387] do_syscall_64+0x3b/0xc0
[3868.781059] entry_SYSCALL_64_after_hwframe+0x44/0xae
[3868.781953] RIP: 0033:0x7f281c59e957
[3868.782585] Code: 3c 1c 48 f7 d8 4c (...)
[3868.785867] RSP: 002b:00007ffe1f83e2b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[3868.787198] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281c59e957
[3868.788450] RDX: 00007ffe1f83e2c0 RSI: 0000000050009418 RDI: 0000000000000003
[3868.789748] RBP: 00007ffe1f83f300 R08: 0000000000000000 R09: 00007ffe1f83fe36
[3868.791214] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003
[3868.792468] R13: 0000000000000003 R14: 00007ffe1f83e2c0 R15: 00000000000003cc
[3868.793765] </TASK>
[3868.794037] irq event stamp: 0
[3868.794548] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[3868.795670] hardirqs last disabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040
[3868.797086] softirqs last enabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040
[3868.798309] softirqs last disabled at (0): [<0000000000000000>] 0x0
[3868.799284] ---[ end trace be24c7002fe27747 ]---
[3868.799928] BTRFS info (device dm-0): leaf 241188864 gen 1268 total ptrs 214 free space 469 owner 2
[3868.801133] BTRFS info (device dm-0): refs 2 lock_owner 225627 current 225627
[3868.802056] item 0 key (237436928 169 0) itemoff 16250 itemsize 33
[3868.802863] extent refs 1 gen 1265 flags 2
[3868.803447] ref#0: tree block backref root 1610
(...)
[3869.064354] item 114 key (241008640 169 0) itemoff 12488 itemsize 33
[3869.065421] extent refs 1 gen 1268 flags 2
[3869.066115] ref#0: tree block backref root 1689
(...)
[3869.403834] BTRFS error (device dm-0): unable to find ref byte nr 241008640 parent 0 root 1622 owner 0 offset 0
[3869.405641] BTRFS: error (device dm-0) in __btrfs_free_extent:3076: errno=-2 No such entry
[3869.407138] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2159: errno=-2 No such entry
Fix this by passing the new subvolume's root ID to btrfs_free_tree_block().
This requires changing the root argument of btrfs_free_tree_block() from
struct btrfs_root * to a u64, since at this point during the subvolume
creation we have not yet created the struct btrfs_root for the new
subvolume, and btrfs_free_tree_block() only needs a root ID and nothing
else from a struct btrfs_root.
This was triggered by test case generic/475 from fstests.
Fixes: 67addf2900 ("btrfs: fix metadata extent leak after failure to create subvolume")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe reported a hang when we have errors on btrfs. This turned out to
be a side-effect of my fix c2e3930529 ("btrfs: clear extent buffer
uptodate when we fail to write it") which made it so we clear
EXTENT_BUFFER_UPTODATE on an eb when we fail to write it out.
Below is a paste of Filipe's analysis he got from using drgn to debug
the hang
"""
btree readahead code calls read_extent_buffer_pages(), sets ->io_pages to
a value while writeback of all pages has not yet completed:
--> writeback for the first 3 pages finishes, we clear
EXTENT_BUFFER_UPTODATE from eb on the first page when we get an
error.
--> at this point eb->io_pages is 1 and we cleared Uptodate bit from the
first 3 pages
--> read_extent_buffer_pages() does not see EXTENT_BUFFER_UPTODATE() so
it continues, it's able to lock the pages since we obviously don't
hold the pages locked during writeback
--> read_extent_buffer_pages() then computes 'num_reads' as 3, and sets
eb->io_pages to 3, since only the first page does not have Uptodate
bit set at this point
--> writeback for the remaining page completes, we ended decrementing
eb->io_pages by 1, resulting in eb->io_pages == 2, and therefore
never calling end_extent_buffer_writeback(), so
EXTENT_BUFFER_WRITEBACK remains in the eb's flags
--> of course, when the read bio completes, it doesn't and shouldn't
call end_extent_buffer_writeback()
--> we should clear EXTENT_BUFFER_UPTODATE only after all pages of
the eb finished writeback? or maybe make the read pages code
wait for writeback of all pages of the eb to complete before
checking which pages need to be read, touch ->io_pages, submit
read bio, etc
writeback bit never cleared means we can hang when aborting a
transaction, at:
btrfs_cleanup_one_transaction()
btrfs_destroy_marked_extents()
wait_on_extent_buffer_writeback()
"""
This is a problem because our writes are not synchronized with reads in
any way. We clear the UPTODATE flag and then we can easily come in and
try to read the EB while we're still waiting on other bio's to
complete.
We have two options here, we could lock all the pages, and then check to
see if eb->io_pages != 0 to know if we've already got an outstanding
write on the eb.
Or we can simply check to see if we have WRITE_ERR set on this extent
buffer. We set this bit _before_ we clear UPTODATE, so if the read gets
triggered because we aren't UPTODATE because of a write error we're
guaranteed to have WRITE_ERR set, and in this case we can simply return
-EIO. This will fix the reported hang.
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: c2e3930529 ("btrfs: clear extent buffer uptodate when we fail to write it")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Second set of fixes for v5.16, hopefully also the last one. I changed
my email in MAINTAINERS, one crash fix in iwlwifi and some build
problems fixed.
iwlwifi
* fix crash caused by a warning
* fix LED linking problem
brcmsmac
* rework LED dependencies for being consistent with other drivers
mt76
* mt7921: fix build regression
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmG5+OoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt8cQgAirUKiqxpaEvrSNLU+H1qzzXtBeX1+jzL
pJXJAmCgZua2rAYMO4VWNo4wYg4huXG5DfNbxZDRSJLJPwHjNAicFQltZEDdJS+L
9LIWSLQTrEkZwSLscoSC6wEAcOjjINUv6v/ulnTUTmhN+yJ2LqgV7K9CEF80Oxag
FmgHa4c35fzBzXEMGIR0LKjB+gp44PrzCHnb9Ct5AS8neP31v5Zwgnk3IOJBv1nX
pOtNPzhlwF0zAafTzYS/gYcBoCkLTILhFc6kFyh08YnV6uZdAoYbvMka9GeEaAIR
QrGPAnT/bQ/s/p50O6kv8YzLTnfMFLQEdMJAaPl4Bw8WEfW64hkEWg==
=yguO
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-2021-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.16
Second set of fixes for v5.16, hopefully also the last one. I changed
my email in MAINTAINERS, one crash fix in iwlwifi and some build
problems fixed.
iwlwifi
* fix crash caused by a warning
* fix LED linking problem
brcmsmac
* rework LED dependencies for being consistent with other drivers
mt76
* mt7921: fix build regression
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-14
This series contains updates to ice driver only.
Karol corrects division that was causing incorrect calculations and
adds a check to ensure stale timestamps are not being used.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix up unprivileged test case results for 'Dest pointer in r0' verifier tests
given they now need to reject R0 containing a pointer value, and add a couple
of new related ones with 32bit cmpxchg as well.
root@foo:~/bpf/tools/testing/selftests/bpf# ./test_verifier
#0/u invalid and of negative number OK
#0/p invalid and of negative number OK
[...]
#1268/p XDP pkt read, pkt_meta' <= pkt_data, bad access 1 OK
#1269/p XDP pkt read, pkt_meta' <= pkt_data, bad access 2 OK
#1270/p XDP pkt read, pkt_data <= pkt_meta', good access OK
#1271/p XDP pkt read, pkt_data <= pkt_meta', bad access 1 OK
#1272/p XDP pkt read, pkt_data <= pkt_meta', bad access 2 OK
Summary: 1900 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The implementation of BPF_CMPXCHG on a high level has the following parameters:
.-[old-val] .-[new-val]
BPF_R0 = cmpxchg{32,64}(DST_REG + insn->off, BPF_R0, SRC_REG)
`-[mem-loc] `-[old-val]
Given a BPF insn can only have two registers (dst, src), the R0 is fixed and
used as an auxilliary register for input (old value) as well as output (returning
old value from memory location). While the verifier performs a number of safety
checks, it misses to reject unprivileged programs where R0 contains a pointer as
old value.
Through brute-forcing it takes about ~16sec on my machine to leak a kernel pointer
with BPF_CMPXCHG. The PoC is basically probing for kernel addresses by storing the
guessed address into the map slot as a scalar, and using the map value pointer as
R0 while SRC_REG has a canary value to detect a matching address.
Fix it by checking R0 for pointers, and reject if that's the case for unprivileged
programs.
Fixes: 5ffa25502b ("bpf: Add instructions for atomic_[cmp]xchg")
Reported-by: Ryota Shiga (Flatt Security)
Acked-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test whether unprivileged would be able to leak the spilled pointer either
by exporting the returned value from the atomic{32,64} operation or by reading
and exporting the value from the stack after the atomic operation took place.
Note that for unprivileged, the below atomic cmpxchg test case named "Dest
pointer in r0 - succeed" is failing. The reason is that in the dst memory
location (r10 -8) there is the spilled register r10:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (bf) r0 = r10
1: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (7b) *(u64 *)(r10 -8) = r0
2: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 fp-8_w=fp
2: (b7) r1 = 0
3: R0_w=fp0 R1_w=invP0 R10=fp0 fp-8_w=fp
3: (db) r0 = atomic64_cmpxchg((u64 *)(r10 -8), r0, r1)
4: R0_w=fp0 R1_w=invP0 R10=fp0 fp-8_w=mmmmmmmm
4: (79) r1 = *(u64 *)(r0 -8)
5: R0_w=fp0 R1_w=invP(id=0) R10=fp0 fp-8_w=mmmmmmmm
5: (b7) r0 = 0
6: R0_w=invP0 R1_w=invP(id=0) R10=fp0 fp-8_w=mmmmmmmm
6: (95) exit
However, allowing this case for unprivileged is a bit useless given an
update with a new pointer will fail anyway:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (bf) r0 = r10
1: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (7b) *(u64 *)(r10 -8) = r0
2: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 fp-8_w=fp
2: (db) r0 = atomic64_cmpxchg((u64 *)(r10 -8), r0, r10)
R10 leaks addr into mem
Acked-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The change in commit 37086bfdc7 ("bpf: Propagate stack bounds to registers
in atomics w/ BPF_FETCH") around check_mem_access() handling is buggy since
this would allow for unprivileged users to leak kernel pointers. For example,
an atomic fetch/and with -1 on a stack destination which holds a spilled
pointer will migrate the spilled register type into a scalar, which can then
be exported out of the program (since scalar != pointer) by dumping it into
a map value.
The original implementation of XADD was preventing this situation by using
a double call to check_mem_access() one with BPF_READ and a subsequent one
with BPF_WRITE, in both cases passing -1 as a placeholder value instead of
register as per XADD semantics since it didn't contain a value fetch. The
BPF_READ also included a check in check_stack_read_fixed_off() which rejects
the program if the stack slot is of __is_pointer_value() if dst_regno < 0.
The latter is to distinguish whether we're dealing with a regular stack spill/
fill or some arithmetical operation which is disallowed on non-scalars, see
also 6e7e63cbb0 ("bpf: Forbid XADD on spilled pointers for unprivileged
users") for more context on check_mem_access() and its handling of placeholder
value -1.
One minimally intrusive option to fix the leak is for the BPF_FETCH case to
initially check the BPF_READ case via check_mem_access() with -1 as register,
followed by the actual load case with non-negative load_reg to propagate
stack bounds to registers.
Fixes: 37086bfdc7 ("bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH")
Reported-by: <n4ke4mry@gmail.com>
Acked-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 0259d4498b ("bcache: move calc_cached_dev_sectors to proper
place on backing device detach") tries to fix calc_cached_dev_sectors
when bcache device detaches, but now we have:
cached_dev_detach_finish
...
bcache_device_detach(&dc->disk);
...
closure_put(&d->c->caching);
d->c = NULL; [*explicitly set dc->disk.c to NULL*]
list_move(&dc->list, &uncached_devices);
calc_cached_dev_sectors(dc->disk.c); [*passing a NULL pointer*]
...
Upper codeflows shows how bug happens, this patch fix the problem by
caching dc->disk.c beforehand, and cache_set won't be freed under us
because c->caching closure at least holds a reference count and closure
callback __cache_set_unregister only being called by bch_cache_set_stop
which using closure_queue(&c->caching), that means c->caching closure
callback for destroying cache_set won't be trigger by previous
closure_put(&d->c->caching).
So at this stage(while cached_dev_detach_finish is calling) it's safe to
access cache_set dc->disk.c.
Fixes: 0259d4498b ("bcache: move calc_cached_dev_sectors to proper place on backing device detach")
Signed-off-by: Lin Feng <linf@wangsu.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20211112053629.3437-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dexuan reports that he's seeing spikes of very heavy CPU utilization when
running 24 disks and using the 'none' scheduler. This happens off the
sched restart path, because SCSI requires the queue to be restarted async,
and hence we're hammering on mod_delayed_work_on() to ensure that the work
item gets run appropriately.
Avoid hammering on the timer and just use queue_work_on() if no delay
has been specified.
Reported-and-tested-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/linux-block/BYAPR21MB1270C598ED214C0490F47400BF719@BYAPR21MB1270.namprd21.prod.outlook.com/
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mat Martineau says:
====================
mptcp: Fixes for ULP, a deadlock, and netlink docs
Two of the MPTCP fixes in this set are related to the TCP_ULP socket
option with MPTCP sockets operating in "fallback" mode (the connection
has reverted to regular TCP). The other issues are an observed deadlock
and missing parameter documentation in the MPTCP netlink API.
Patch 1 marks TCP_ULP as unsupported earlier in MPTCP setsockopt code,
so the fallback code path in the MPTCP layer does not pass the TCP_ULP
option down to the subflow TCP socket.
Patch 2 makes sure a TCP fallback socket returned to userspace by
accept()ing on a MPTCP listening socket does not allow use of the
"mptcp" TCP_ULP type. That ULP is intended only for use by in-kernel
MPTCP subflows.
Patch 3 fixes the possible deadlock when sending data and there are
socket option changes to sync to the subflows.
Patch 4 makes sure all MPTCP netlink event parameters are documented
in the MPTCP uapi header.
====================
Link: https://lore.kernel.org/r/20211214231604.211016-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli
D. Wythe
Arnd Bergmann
Gal Pressman
Wenliang Wang
Andrey Eremeev
Jiasheng Jiang
John Keeping
David S. Miller
Greg Jesionowski
Willem de Bruijn
Haimin Zhang
Ioana Ciornei
Dave Airlie
Mathias Nyman
Yang Yingliang
Manish Narani
Amelie Delaunay
Xu Yang
Pawel Laszczak
Jimmy Wang
Nehal Bakulchandra Shah
Ji-Ze Hong (Peter Hong)
Tetsuo Handa
Cyril Novikov
Mike Snitzer
Robert Schlabbach
Sasha Neftin
Letu Ren
Karen Sornek
Linus Torvalds
Paul Moore
Greg Kroah-Hartman
Nathan Chancellor
Shin'ichiro Kawasaki
Filipe Manana
Josef Bacik
Daniel Borkmann
Lin Feng
Jens Axboe
Jakub Kicinski