Граф коммитов

33 Коммитов

Автор SHA1 Сообщение Дата
Kees Cook b16520f749 net/tls: Remove VLA usage
In the quest to remove VLAs from the kernel[1], this replaces the VLA
size with the only possible size used in the code, and adds a mechanism
to double-check future IV sizes.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12 21:46:10 -04:00
Atul Gupta dd0bed1665 tls: support for Inline tls record
Facility to register Inline TLS drivers to net/tls. Setup
TLS_HW_RECORD prot to listen on offload device.

Cases handled
- Inline TLS device exists, setup prot for TLS_HW_RECORD
- Atleast one Inline TLS exists, sets TLS_HW_RECORD.
- If non-inline device establish connection, move to TLS_SW_TX

Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31 23:37:32 -04:00
Dave Watson c46234ebb4 tls: RX path for ktls
Add rx path for tls software implementation.

recvmsg, splice_read, and poll implemented.

An additional sockopt TLS_RX is added, with the same interface as
TLS_TX.  Either TLX_RX or TLX_TX may be provided separately, or
together (with two different setsockopt calls with appropriate keys).

Control messages are passed via CMSG in a similar way to transmit.
If no cmsg buffer is passed, then only application data records
will be passed to userspace, and EIO is returned for other types of
alerts.

EBADMSG is passed for decryption errors, and EMSGSIZE is passed for
framing too big, and EBADMSG for framing too small (matching openssl
semantics). EINVAL is returned for TLS versions that do not match the
original setsockopt call.  All are unrecoverable.

strparser is used to parse TLS framing.   Decryption is done directly
in to userspace buffers if they are large enough to support it, otherwise
sk_cow_data is called (similar to ipsec), and buffers are decrypted in
place and copied.  splice_read always decrypts in place, since no
buffers are provided to decrypt in to.

sk_poll is overridden, and only returns POLLIN if a full TLS message is
received.  Otherwise we wait for strparser to finish reading a full frame.
Actual decryption is only done during recvmsg or splice_read calls.

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23 12:25:54 -04:00
Dave Watson 583715853a tls: Refactor variable names
Several config variables are prefixed with tx, drop the prefix
since these will be used for both tx and rx.

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23 12:25:54 -04:00
Dave Watson f4a8e43f1f tls: Pass error code explicitly to tls_err_abort
Pass EBADMSG explicitly to tls_err_abort.  Receive path will
pass additional codes - EMSGSIZE if framing is larger than max
TLS record size, EINVAL if TLS version mismatch.

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23 12:25:54 -04:00
Dave Watson dbe425599b tls: Move cipher info to a separate struct
Separate tx crypto parameters to a separate cipher_context struct.
The same parameters will be used for rx using the same struct.

tls_advance_record_sn is modified to only take the cipher info.

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23 12:25:53 -04:00
Dave Watson 69ca9293e8 tls: Generalize zerocopy_from_iter
Refactor zerocopy_from_iter to take arguments for pages and size,
such that it can be used for both tx and rx. RX will also support
zerocopy direct to output iter, as long as the full message can
be copied at once (a large enough userspace buffer was provided).

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23 12:25:53 -04:00
John Fastabend 8c05dbf04b net: generalize sk_alloc_sg to work with scatterlist rings
The current implementation of sk_alloc_sg expects scatterlist to always
start at entry 0 and complete at entry MAX_SKB_FRAGS.

Future patches will want to support starting at arbitrary offset into
scatterlist so add an additional sg_start parameters and then default
to the current values in TLS code paths.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-19 21:14:38 +01:00
John Fastabend 2c3682f0be sock: make static tls function alloc_sg generic sock helper
The TLS ULP module builds scatterlists from a sock using
page_frag_refill(). This is going to be useful for other ULPs
so move it into sock file for more general use.

In the process remove useless goto at end of while loop.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-19 21:14:38 +01:00
Boris Pismenny c113187d38 tls: Use correct sk->sk_prot for IPV6
The tls ulp overrides sk->prot with a new tls specific proto structs.
The tls specific structs were previously based on the ipv4 specific
tcp_prot sturct.
As a result, attaching the tls ulp to an ipv6 tcp socket replaced
some ipv6 callback with the ipv4 equivalents.

This patch adds ipv6 tls proto structs and uses them when
attached to ipv6 sockets.

Fixes: 3c4d755915 ('tls: kernel TLS support')
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27 14:41:48 -05:00
Boris Pismenny c410c1966f tls: getsockopt return record sequence number
Return the TLS record sequence number in getsockopt.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14 15:05:19 -05:00
Boris Pismenny 257082e6ae tls: reset the crypto info if copy_from_user fails
copy_from_user could copy some partial information, as a result
TLS_CRYPTO_INFO_READY(crypto_info) could be true while crypto_info is
using uninitialzed data.

This patch resets crypto_info when copy_from_user fails.

fixes: 3c4d755915 ("tls: kernel TLS support")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14 15:05:19 -05:00
Boris Pismenny a1dfa6812b tls: retrun the correct IV in getsockopt
Current code returns four bytes of salt followed by four bytes of IV.
This patch returns all eight bytes of IV.

fixes: 3c4d755915 ("tls: kernel TLS support")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14 15:05:19 -05:00
John Fastabend b11a632c44 net: add a UID to use for ULP socket assignment
Create a UID field and enum that can be used to assign ULPs to
sockets. This saves a set of string comparisons if the ULP id
is known.

For sockmap, which is added in the next patches, a ULP is used to
hook into TCP sockets close state. In this case the ULP being added
is done at map insert time and the ULP is known and done on the kernel
side. In this case the named lookup is not needed. Because we don't
want to expose psock internals to user space socket options a user
visible flag is also added. For TLS this is set for BPF it will be
cleared.

Alos remove pr_notice, user gets an error code back and should check
that rather than rely on logs.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-06 11:39:31 +01:00
Vakul Garg a54667f672 tls: Add support for encryption using async offload accelerator
Async crypto accelerators (e.g. drivers/crypto/caam) support offloading
GCM operation. If they are enabled, crypto_aead_encrypt() return error
code -EINPROGRESS. In this case tls_do_encryption() needs to wait on a
completion till the time the response for crypto offload request is
received.

Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31 10:26:30 -05:00
Dave Watson 7a8c4dd9be tls: Correct length of scatterlist in tls_sw_sendpage
The scatterlist is reused by both sendmsg and sendfile.
If a sendmsg of smaller number of pages is followed by a sendfile
of larger number of pages, the scatterlist may be too short, resulting
in a crash in gcm_encrypt.

Add sg_unmark_end to make the list the correct length.

tls_sw_sendmsg already calls sg_unmark_end correctly when it allocates
memory in alloc_sg, or in zerocopy_from_iter.

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22 16:25:21 -05:00
Sabrina Dubroca 6db959c82e tls: reset crypto_info when do_tls_setsockopt_tx fails
The current code copies directly from userspace to ctx->crypto_send, but
doesn't always reinitialize it to 0 on failure. This causes any
subsequent attempt to use this setsockopt to fail because of the
TLS_CRYPTO_INFO_READY check, eventhough crypto_info is not actually
ready.

This should result in a correctly set up socket after the 3rd call, but
currently it does not:

    size_t s = sizeof(struct tls12_crypto_info_aes_gcm_128);
    struct tls12_crypto_info_aes_gcm_128 crypto_good = {
        .info.version = TLS_1_2_VERSION,
        .info.cipher_type = TLS_CIPHER_AES_GCM_128,
    };

    struct tls12_crypto_info_aes_gcm_128 crypto_bad_type = crypto_good;
    crypto_bad_type.info.cipher_type = 42;

    setsockopt(sock, SOL_TLS, TLS_TX, &crypto_bad_type, s);
    setsockopt(sock, SOL_TLS, TLS_TX, &crypto_good, s - 1);
    setsockopt(sock, SOL_TLS, TLS_TX, &crypto_good, s);

Fixes: 3c4d755915 ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17 16:16:04 -05:00
Sabrina Dubroca 877d17c79b tls: return -EBUSY if crypto_info is already set
do_tls_setsockopt_tx returns 0 without doing anything when crypto_info
is already set. Silent failure is confusing for users.

Fixes: 3c4d755915 ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17 16:16:03 -05:00
Sabrina Dubroca cf6d43ef66 tls: fix sw_ctx leak
During setsockopt(SOL_TCP, TLS_TX), if initialization of the software
context fails in tls_set_sw_offload(), we leak sw_ctx. We also don't
reassign ctx->priv_ctx to NULL, so we can't even do another attempt to
set it up on the same socket, as it will fail with -EEXIST.

Fixes: 3c4d755915 ('tls: kernel TLS support')
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17 16:16:03 -05:00
Ilya Lesokhin d91c3e17f7 net/tls: Only attach to sockets in ESTABLISHED state
Calling accept on a TCP socket with a TLS ulp attached results
in two sockets that share the same ulp context.
The ulp context is freed while a socket is destroyed, so
after one of the sockets is released, the second second will
trigger a use after free when it tries to access the ulp context
attached to it.
We restrict the TLS ulp to sockets in ESTABLISHED state
to prevent the scenario above.

Fixes: 3c4d755915 ("tls: kernel TLS support")
Reported-by: syzbot+904e7cd6c5c741609228@syzkaller.appspotmail.com
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17 16:05:28 -05:00
r.hering@avm.de 30be8f8dba net/tls: Fix inverted error codes to avoid endless loop
sendfile() calls can hang endless with using Kernel TLS if a socket error occurs.
Socket error codes must be inverted by Kernel TLS before returning because
they are stored with positive sign. If returned non-inverted they are
interpreted as number of bytes sent, causing endless looping of the
splice mechanic behind sendfile().

Signed-off-by: Robert Hering <r.hering@avm.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15 14:21:57 -05:00
Ilya Lesokhin ee181e5201 tls: don't override sk_write_space if tls_set_sw_offload fails.
If we fail to enable tls in the kernel we shouldn't override
the sk_write_space callback

Fixes: 3c4d755915 ('tls: kernel TLS support')
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14 16:26:35 +09:00
Ilya Lesokhin 196c31b4b5 tls: Avoid copying crypto_info again after cipher_type check.
Avoid copying crypto_info again after cipher_type check
to avoid a TOCTOU exploits.
The temporary array on the stack is removed as we don't really need it

Fixes: 3c4d755915 ('tls: kernel TLS support')
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14 16:26:34 +09:00
Ilya Lesokhin 213ef6e7c9 tls: Move tls_make_aad to header to allow sharing
move tls_make_aad as it is going to be reused
by the device offload code and rx path.
Remove unused recv parameter.

Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14 16:26:34 +09:00
Ilya Lesokhin ff45d820a2 tls: Fix TLS ulp context leak, when TLS_TX setsockopt is not used.
Previously the TLS ulp context would leak if we attached a TLS ulp
to a socket but did not use the TLS_TX setsockopt,
or did use it but it failed.
This patch solves the issue by overriding prot[TLS_BASE_TX].close
and fixing tls_sk_proto_close to work properly
when its called with ctx->tx_conf == TLS_BASE_TX.
This patch also removes ctx->free_resources as we can use ctx->tx_conf
to obtain the relevant information.

Fixes: 3c4d755915 ('tls: kernel TLS support')
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14 16:26:34 +09:00
Ilya Lesokhin 6d88207fcf tls: Add function to update the TLS socket configuration
The tx configuration is now stored in ctx->tx_conf.
And sk->sk_prot is updated trough a function
This will simplify things when we add rx
and support for different possible
tx and rx cross configurations.

Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14 16:26:34 +09:00
Ilya Lesokhin 61ef6da622 tls: Use kzalloc for aead_request allocation
Use kzalloc for aead_request allocation as
we don't set all the bits in the request.

Fixes: 3c4d755915 ('tls: kernel TLS support')
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14 16:26:34 +09:00
Tobias Klauser a5135676bb tls: make tls_sw_free_resources static
Make the needlessly global function tls_sw_free_resources static to fix
a gcc/sparse warning.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-14 09:55:21 -07:00
Matthias Rosenfelder 5a3b886c3c TLS: Fix length check in do_tls_getsockopt_tx()
copy_to_user() copies the struct the pointer is pointing to, but the
length check compares against sizeof(pointer) and not sizeof(struct).
On 32-bit the size is probably the same, so it might have worked
accidentally.

Signed-off-by: Matthias Rosenfelder <mrosenfelder.lkml@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-06 10:58:19 +01:00
Dan Carpenter ac55cd6193 tls: return -EFAULT if copy_to_user() fails
The copy_to_user() function returns the number of bytes remaining but we
want to return -EFAULT here.

Fixes: 3c4d755915 ("tls: kernel TLS support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23 14:19:27 -04:00
Dave Watson d807ec656f tls: update Kconfig
Missing crypto deps for some platforms.
Default to n for new module.

config: m68k-amcore_defconfig (attached as .config)
compiler: m68k-linux-gcc (GCC) 4.9.0

make.cross ARCH=m68k
All errors (new ones prefixed by >>):

   net/built-in.o: In function `tls_set_sw_offload':
>> (.text+0x732f8): undefined reference to `crypto_alloc_aead'
   net/built-in.o: In function `tls_set_sw_offload':
>> (.text+0x7333c): undefined reference to `crypto_aead_setkey'
   net/built-in.o: In function `tls_set_sw_offload':
>> (.text+0x73354): undefined reference to `crypto_aead_setauthsize'

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17 22:56:46 -04:00
David S. Miller 54144b4825 tls: Depend upon INET not plain NET.
We refer to TCP et al. symbols so have to use INET as
the dependency.

   ERROR: "tcp_prot" [net/tls/tls.ko] undefined!
>> ERROR: "tcp_rate_check_app_limited" [net/tls/tls.ko] undefined!
   ERROR: "tcp_register_ulp" [net/tls/tls.ko] undefined!
   ERROR: "tcp_unregister_ulp" [net/tls/tls.ko] undefined!
   ERROR: "do_tcp_sendpages" [net/tls/tls.ko] undefined!

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:28:49 -04:00
Dave Watson 3c4d755915 tls: kernel TLS support
Software implementation of transport layer security, implemented using ULP
infrastructure.  tcp proto_ops are replaced with tls equivalents of sendmsg and
sendpage.

Only symmetric crypto is done in the kernel, keys are passed by setsockopt
after the handshake is complete.  All control messages are supported via CMSG
data - the actual symmetric encryption is the same, just the message type needs
to be passed separately.

For user API, please see Documentation patch.

Pieces that can be shared between hw and sw implementation
are in tls_main.c

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15 12:12:40 -04:00