Commit e687ad60af ("netfilter: add netfilter ingress hook after
handle_ing() under unique static key") introduced the ability to
classify packets on ingress.
Allow the same on egress. Position the hook immediately before a packet
is handed to tc and then sent out on an interface, thereby mirroring the
ingress order. This order allows marking packets in the netfilter
egress hook and subsequently using the mark in tc. Another benefit of
this order is consistency with a lot of existing documentation which
says that egress tc is performed after netfilter hooks.
Egress hooks already exist for the most common protocols, such as
NF_INET_LOCAL_OUT or NF_ARP_OUT, and those are to be preferred because
they are executed earlier during packet processing. However for more
exotic protocols, there is currently no provision to apply netfilter on
egress. A common workaround is to enslave the interface to a bridge and
use ebtables, or to resort to tc. But when the ingress hook was
introduced, consensus was that users should be given the choice to use
netfilter or tc, whichever tool suits their needs best:
https://lore.kernel.org/netdev/20150430153317.GA3230@salvia/
This hook is also useful for NAT46/NAT64, tunneling and filtering of
locally generated af_packet traffic such as dhclient.
There have also been occasional user requests for a netfilter egress
hook in the past, e.g.:
https://www.spinics.net/lists/netfilter/msg50038.html
Performance measurements with pktgen surprisingly show a speedup rather
than a slowdown with this commit:
* Without this commit:
Result: OK: 34240933(c34238375+d2558) usec, 100000000 (60byte,0frags)
2920481pps 1401Mb/sec (1401830880bps) errors: 0
* With this commit:
Result: OK: 33997299(c33994193+d3106) usec, 100000000 (60byte,0frags)
2941410pps 1411Mb/sec (1411876800bps) errors: 0
* Without this commit + tc egress:
Result: OK: 39022386(c39019547+d2839) usec, 100000000 (60byte,0frags)
2562631pps 1230Mb/sec (1230062880bps) errors: 0
* With this commit + tc egress:
Result: OK: 37604447(c37601877+d2570) usec, 100000000 (60byte,0frags)
2659259pps 1276Mb/sec (1276444320bps) errors: 0
* With this commit + nft egress:
Result: OK: 41436689(c41434088+d2600) usec, 100000000 (60byte,0frags)
2413320pps 1158Mb/sec (1158393600bps) errors: 0
Tested on a bare-metal Core i7-3615QM, each measurement was performed
three times to verify that the numbers are stable.
Commands to perform a measurement:
modprobe pktgen
echo "add_device lo@3" > /proc/net/pktgen/kpktgend_3
samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh -i 'lo@3' -n 100000000
Commands for testing tc egress:
tc qdisc add dev lo clsact
tc filter add dev lo egress protocol ip prio 1 u32 match ip dst 4.3.2.1/32
Commands for testing nft egress:
nft add table netdev t
nft add chain netdev t co \{ type filter hook egress device lo priority 0 \; \}
nft add rule netdev t co ip daddr 4.3.2.1/32 drop
All testing was performed on the loopback interface to avoid distorting
measurements by the packet handling in the low-level Ethernet driver.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Mark usb_raw_io_flags_valid() and usb_raw_io_flags_zero() as inline to
fix the following warnings:
./usr/include/linux/usb/raw_gadget.h:69:12: warning: unused function 'usb_raw_io_flags_valid' [-Wunused-function]
./usr/include/linux/usb/raw_gadget.h:74:12: warning: unused function 'usb_raw_io_flags_zero' [-Wunused-function]
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/6206b80b3810f95bfe1d452de45596609a07b6ea.1584456779.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have added support for bunch of new decoders and parameters for
decoders. To help users find the support bump the version up to 0,2,0.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-10-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some WMA decoders like WMAv10 etc need some additional encoder option
parameters, so add these as WMA decoder params.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-3-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some codec profiles were missing for WMA, like WMA9/10 lossless and
wma10 pro, so add these profiles
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-2-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Allow to disable gisa
2. protected virtual machines
Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
state like guest memory and guest registers anymore. Instead the
PVMs are mostly managed by a new entity called Ultravisor (UV),
which provides an API, so KVM and the PV can request management
actions.
PVMs are encrypted at rest and protected from hypervisor access
while running. They switch from a normal operation into protected
mode, so we can still use the standard boot process to load a
encrypted blob and then move it into protected mode.
Rebooting is only possible by passing through the unprotected/normal
mode and switching to protected again.
One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
add callbacks for inaccessible pages)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=x6Hn
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Features and Enhancements for 5.7 part1
1. Allow to disable gisa
2. protected virtual machines
Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
state like guest memory and guest registers anymore. Instead the
PVMs are mostly managed by a new entity called Ultravisor (UV),
which provides an API, so KVM and the PV can request management
actions.
PVMs are encrypted at rest and protected from hypervisor access
while running. They switch from a normal operation into protected
mode, so we can still use the standard boot process to load a
encrypted blob and then move it into protected mode.
Rebooting is only possible by passing through the unprotected/normal
mode and switching to protected again.
One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
add callbacks for inaccessible pages)
It could take kvm->mmu_lock for an extended period of time when
enabling dirty log for the first time. The main cost is to clear
all the D-bits of last level SPTEs. This situation can benefit from
manual dirty log protect as well, which can reduce the mmu_lock
time taken. The sequence is like this:
1. Initialize all the bits of the dirty bitmap to 1 when enabling
dirty log for the first time
2. Only write protect the huge pages
3. KVM_GET_DIRTY_LOG returns the dirty bitmap info
4. KVM_CLEAR_DIRTY_LOG will clear D-bit for each of the leaf level
SPTEs gradually in small chunks
Under the Intel(R) Xeon(R) Gold 6152 CPU @ 2.10GHz environment,
I did some tests with a 128G windows VM and counted the time taken
of memory_global_dirty_log_start, here is the numbers:
VM Size Before After optimization
128G 460ms 10ms
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
FDC registers FD_STATUS, FD_DATA, FD_DOR, FD_DIR and FD_DCR used to be
defined relative to FD_IOPORT, which is the FDC's base address, itself
a macro depending on the "fdc" local or global variable.
This patch changes this so that the register macros above now only
reference the address offset, and that the FDC's address is explicitly
passed in each call to fd_inb() and fd_outb(), thus removing the macro.
With this change there is no more implicit usage of the local/global
"fdc" variable.
One place in the ARM code used to check if the port was equal to FD_DOR,
this was changed to testing the register by applying a mask to the port,
as was already done in the sparc code.
There are still occurrences of fd_inb() and fd_outb() in the PARISC
code and these ones remain unaffected since they already used to work
with a base address and a register offset.
The sparc, m68k and parisc code could now be slightly cleaned up to
benefit from the macro definitions above instead of the equivalent
hard-coded values.
Link: https://lore.kernel.org/r/20200301195555.11154-6-w@1wt.eu
Cc: Ian Molton <spyro@f2s.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Netlink support of extended packet number cipher suites,
allows adding and updating XPN macsec interfaces.
Added support in:
* Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites.
* Setting and getting 64bit packet numbers with of SAs.
* Setting (only on SA creation) and getting ssci of SAs.
* Setting salt when installing a SAK.
Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1:
* MACSEC_CIPHER_ID_GCM_AES_XPN_128
* MACSEC_CIPHER_ID_GCM_AES_XPN_256
In addition, added 2 new netlink attribute types:
* MACSEC_SA_ATTR_SSCI
* MACSEC_SA_ATTR_SALT
Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw.
Signed-off-by: Era Mayflower <mayflowerera@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
Lastly, fix checkpatch.pl warning
WARNING: __aligned(size) is preferred over __attribute__((aligned(size)))
in net/bridge/netfilter/ebtables.c
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Like vxlan and erspan opts, geneve opts should also be supported in
nft_tunnel. The difference is geneve RFC (draft-ietf-nvo3-geneve-14)
allows a geneve packet to carry multiple geneve opts. So with this
patch, nftables/libnftnl would do:
# nft add table ip filter
# nft add chain ip filter input { type filter hook input priority 0 \; }
# nft add tunnel filter geneve_02 { type geneve\; id 2\; \
ip saddr 192.168.1.1\; ip daddr 192.168.1.2\; \
sport 9000\; dport 9001\; dscp 1234\; ttl 64\; flags 1\; \
opts \"1:1:34567890,2:2:12121212,3:3:1212121234567890\"\; }
# nft list tunnels table filter
table ip filter {
tunnel geneve_02 {
id 2
ip saddr 192.168.1.1
ip daddr 192.168.1.2
sport 9000
dport 9001
tos 18
ttl 64
flags 1
geneve opts 1:1:34567890,2:2:12121212,3:3:1212121234567890
}
}
v1->v2:
- no changes, just post it separately.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is a snapshot of hardidletimer netfilter target.
This patch implements a hardidletimer Xtables target that can be
used to identify when interfaces have been idle for a certain period
of time.
Timers are identified by labels and are created when a rule is set
with a new label. The rules also take a timeout value (in seconds) as
an option. If more than one rule uses the same timer label, the timer
will be restarted whenever any of the rules get a hit.
One entry for each timer is created in sysfs. This attribute contains
the timer remaining for the timer to expire. The attributes are
located under the xt_idletimer class:
/sys/class/xt_idletimer/timers/<label>
When the timer expires, the target module sends a sysfs notification
to the userspace, which can then decide what to do (eg. disconnect to
save power)
Compared to IDLETIMER, HARDIDLETIMER can send notifications when
CPU is in suspend too, to notify the timer expiry.
v1->v2: Moved all functionality into IDLETIMER module to avoid
code duplication per comment from Florian.
Signed-off-by: Manoj Basapathi <manojbm@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
USB Raw Gadget is a kernel module that provides a userspace interface for
the USB Gadget subsystem. Essentially it allows to emulate USB devices
from userspace. Enabled with CONFIG_USB_RAW_GADGET. Raw Gadget is
currently a strictly debugging feature and shouldn't be used in
production.
Raw Gadget is similar to GadgetFS, but provides a more low-level and
direct access to the USB Gadget layer for the userspace. The key
differences are:
1. Every USB request is passed to the userspace to get a response, while
GadgetFS responds to some USB requests internally based on the provided
descriptors. However note, that the UDC driver might respond to some
requests on its own and never forward them to the Gadget layer.
2. GadgetFS performs some sanity checks on the provided USB descriptors,
while Raw Gadget allows you to provide arbitrary data as responses to
USB requests.
3. Raw Gadget provides a way to select a UDC device/driver to bind to,
while GadgetFS currently binds to the first available UDC.
4. Raw Gadget uses predictable endpoint names (handles) across different
UDCs (as long as UDCs have enough endpoints of each required transfer
type).
5. Raw Gadget has ioctl-based interface instead of a filesystem-based one.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
When the RED Qdisc is currently configured to enable ECN, the RED algorithm
is used to decide whether a certain SKB should be marked. If that SKB is
not ECN-capable, it is early-dropped.
It is also possible to keep all traffic in the queue, and just mark the
ECN-capable subset of it, as appropriate under the RED algorithm. Some
switches support this mode, and some installations make use of it.
To that end, add a new RED flag, TC_RED_NODROP. When the Qdisc is
configured with this flag, non-ECT traffic is enqueued instead of being
early-dropped.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The qdiscs RED, GRED, SFQ and CHOKE use different subsets of the same pool
of global RED flags. These are passed in tc_red_qopt.flags. However none of
these qdiscs validate the flag field, and just copy it over wholesale to
internal structures, and later dump it back. (An exception is GRED, which
does validate for VQs -- however not for the main setup.)
A broken userspace can therefore configure a qdisc with arbitrary
unsupported flags, and later expect to see the flags on qdisc dump. The
current ABI therefore allows storage of several bits of custom data to
qdisc instances of the types mentioned above. How many bits, depends on
which flags are meaningful for the qdisc in question. E.g. SFQ recognizes
flags ECN and HARDDROP, and the rest is not interpreted.
If SFQ ever needs to support ADAPTATIVE, it needs another way of doing it,
and at the same time it needs to retain the possibility to store 6 bits of
uninterpreted data. Likewise RED, which adds a new flag later in this
patchset.
To that end, this patch adds a new function, red_get_flags(), to split the
passed flags of RED-like qdiscs to flags and user bits, and
red_validate_flags() to validate the resulting configuration. It further
adds a new attribute, TCA_RED_FLAGS, to pass arbitrary flags.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-03-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 86 non-merge commits during the last 12 day(s) which contain
a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).
The main changes are:
1) Add modify_return attach type which allows to attach to a function via
BPF trampoline and is run after the fentry and before the fexit programs
and can pass a return code to the original caller, from KP Singh.
2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher
objects to be visible in /proc/kallsyms so they can be annotated in
stack traces, from Jiri Olsa.
3) Extend BPF sockmap to allow for UDP next to existing TCP support in order
in order to enable this for BPF based socket dispatch, from Lorenz Bauer.
4) Introduce a new bpftool 'prog profile' command which attaches to existing
BPF programs via fentry and fexit hooks and reads out hardware counters
during that period, from Song Liu. Example usage:
bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)
5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition
of a new bpf_link abstraction to keep in particular BPF tracing programs
attached even when the applicaion owning them exits, from Andrii Nakryiko.
6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering
and which returns the PID as seen by the init namespace, from Carlos Neira.
7) Refactor of RISC-V JIT code to move out common pieces and addition of a
new RV32G BPF JIT compiler, from Luke Nelson.
8) Add gso_size context member to __sk_buff in order to be able to know whether
a given skb is GSO or not, from Willem de Bruijn.
9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output
implementation but can be called from tracepoint programs, from Eelco Chaudron.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce new helper that reuses existing xdp perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct xdp_buff *' as a tracepoint argument.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158348514556.2239.11050972434793741444.stgit@xdp-tutorial
New bpf helper bpf_get_ns_current_pid_tgid,
This helper will return pid and tgid from current task
which namespace matches dev_t and inode number provided,
this will allows us to instrument a process inside a container.
Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200304204157.58695-3-cneirabustos@gmail.com
Pull networking fixes from David Miller:
"It looks like a decent sized set of fixes, but a lot of these are one
liner off-by-one and similar type changes:
1) Fix netlink header pointer to calcular bad attribute offset
reported to user. From Pablo Neira Ayuso.
2) Don't double clear PHY interrupts when ->did_interrupt is set,
from Heiner Kallweit.
3) Add missing validation of various (devlink, nl802154, fib, etc.)
attributes, from Jakub Kicinski.
4) Missing *pos increments in various netfilter seq_next ops, from
Vasily Averin.
5) Missing break in of_mdiobus_register() loop, from Dajun Jin.
6) Don't double bump tx_dropped in veth driver, from Jiang Lidong.
7) Work around FMAN erratum A050385, from Madalin Bucur.
8) Make sure ARP header is pulled early enough in bonding driver,
from Eric Dumazet.
9) Do a cond_resched() during multicast processing of ipvlan and
macvlan, from Mahesh Bandewar.
10) Don't attach cgroups to unrelated sockets when in interrupt
context, from Shakeel Butt.
11) Fix tpacket ring state management when encountering unknown GSO
types. From Willem de Bruijn.
12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend()
only in the suspend context. From Heiner Kallweit"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
net: systemport: fix index check to avoid an array out of bounds access
tc-testing: add ETS scheduler to tdc build configuration
net: phy: fix MDIO bus PM PHY resuming
net: hns3: clear port base VLAN when unload PF
net: hns3: fix RMW issue for VLAN filter switch
net: hns3: fix VF VLAN table entries inconsistent issue
net: hns3: fix "tc qdisc del" failed issue
taprio: Fix sending packets without dequeueing them
net: mvmdio: avoid error message for optional IRQ
net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
net: memcg: fix lockdep splat in inet_csk_accept()
s390/qeth: implement smarter resizing of the RX buffer pool
s390/qeth: refactor buffer pool code
s390/qeth: use page pointers to manage RX buffer pool
seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
net/packet: tpacket_rcv: do not increment ring index on drop
sxgbe: Fix off by one in samsung driver strncpy size arg
net: caif: Add lockdep expression to RCU traversal primitive
MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
...
amd-drm-next-5.7-2020-03-10:
amdgpu:
- SR-IOV fixes
- Fix up fallout from drm load/unload callback removal
- Navi, renoir power management watermark fixes
- Refactor smu parameter handling
- Display FEC fixes
- Display DCC fixes
- HDCP fixes
- Add support for USB-C PD firmware updates
- Pollock detection fix
- Rework compute ring priority handling
- RAS fixes
- Misc cleanups
amdkfd:
- Consolidate more gfx config details in amdgpu
- Consolidate bo alloc flags
- Improve code comments
- SDMA MQD fixes
- Misc cleanups
gpu scheduler:
- Add suport for modifying the sched list
uapi:
- Clarify comments about GEM_CREATE flags that are not used by userspace.
The kernel driver has always prevented userspace from using these.
They are only used internally in the kernel driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310212748.4519-1-alexander.deucher@amd.com
Send ETHTOOL_MSG_CHANNELS_NTF notification whenever channel counts of
a network device are modified using ETHTOOL_MSG_CHANNELS_SET netlink
message or ETHTOOL_SCHANNELS ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement CHANNELS_SET netlink request to set channel counts of a network
device. These are traditionally set with ETHTOOL_SCHANNELS ioctl request.
Like the ioctl implementation, the generic ethtool code checks if supplied
values do not exceed driver defined limits; if they do, first offending
attribute is reported using extack. Checks preventing removing channels
used for RX indirection table or zerocopy AF_XDP socket are also
implemented.
Move ethtool_get_max_rxfh_channel() helper into common.c so that it can be
used by both ioctl and netlink code.
v2:
- fix netdev reference leak in error path (found by Jakub Kicinsky)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement CHANNELS_GET request to get channel counts of a network device.
These are traditionally available via ETHTOOL_GCHANNELS ioctl request.
Omit attributes for channel types which are not supported by driver or
device (zero reported for maximum).
v2: (all suggested by Jakub Kicinski)
- minor cleanup in channels_prepare_data()
- more descriptive channels_reply_size()
- omit attributes with zero max count
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send ETHTOOL_MSG_RINGS_NTF notification whenever ring sizes of a network
device are modified using ETHTOOL_MSG_RINGS_SET netlink message or
ETHTOOL_SRINGPARAM ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement RINGS_SET netlink request to set ring sizes of a network device.
These are traditionally set with ETHTOOL_SRINGPARAM ioctl request.
Like the ioctl implementation, the generic ethtool code checks if supplied
values do not exceed driver defined limits; if they do, first offending
attribute is reported using extack.
v2:
- fix netdev reference leak in error path (found by Jakub Kicinsky)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement RINGS_GET request to get ring sizes of a network device. These
are traditionally available via ETHTOOL_GRINGPARAM ioctl request.
Omit attributes for ring types which are not supported by driver or device
(zero reported for maximum).
v2: (all suggested by Jakub Kicinski)
- minor cleanup in rings_prepare_data()
- more descriptive rings_reply_size()
- omit attributes with zero max size
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send ETHTOOL_MSG_PRIVFLAGS_NTF notification whenever private flags of
a network device are modified using ETHTOOL_MSG_PRIVFLAGS_SET netlink
message or ETHTOOL_SPFLAGS ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement PRIVFLAGS_SET netlink request to set private flags of a network
device. These are traditionally set with ETHTOOL_SPFLAGS ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement PRIVFLAGS_GET request to get private flags for a network device.
These are traditionally available via ETHTOOL_GPFLAGS ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send ETHTOOL_MSG_FEATURES_NTF notification whenever network device features
are modified using ETHTOOL_MSG_FEATURES_SET netlink message, ethtool ioctl
request or any other way resulting in call to netdev_update_features() or
netdev_change_features()
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement FEATURES_SET netlink request to set network device features.
These are traditionally set using ETHTOOL_SFEATURES ioctl request.
Actual change is subject to netdev_change_features() sanity checks so that
it can differ from what was requested. Unlike with most other SET requests,
in addition to error code and optional extack, kernel provides an optional
reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with
different semantics: information about difference between user request and
actual result and difference between old and new state of dev->features.
This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY
flag in request header.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement FEATURES_GET request to get network device features. These are
traditionally available via ETHTOOL_GFEATURES ioctl request.
v2:
- style cleanup suggested by Jakub Kicinski
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we expose the definition to the dt-bindings we need to keep those
definitions in sync. To address this the patch adds a simple cross
reference to the dt-bindings.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Internet Assigned Numbers Authority (IANA) has recently assigned
a protocol number value of 143 for Ethernet [1].
Before this assignment, encapsulation mechanisms such as Segment Routing
used the IPv6-NoNxt protocol number (59) to indicate that the encapsulated
payload is an Ethernet frame.
In this patch, we add the definition of the Ethernet protocol number to the
kernel headers and update the SRv6 L2 tunnels to use it.
[1] https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@cnit.it>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Acked-by: Ahmed Abdelsalam <ahmed.abdelsalam@gssi.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare variable-length
types such as these ones is a flexible array member[1][2], introduced in
C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200224161406.GA21454@embeddedor
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This just syncs the header it with the liburing version, so there's no
confusion on the license of the header parts.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't need a special structure just for batch descriptors. The
layout matches the general form for other descriptors.
Merge the desc_list_addr field into the union of other aliases for
the the third quadword in the structure.
Create a union to alias "xfer_size" with "desc_count".
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158387868208.35922.5895104426944263789.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5lkYceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGpHQH/RJrzcaZHo4lw88m
Jf7vBZ9DYUlRgqE0pxTHWmodNObKRqpwOUGflUcWbb/7GD2LQUfeqhSECVQyTID9
N9y7FcPvx321Qhc3EkZ24DBYk0+DQ0K2FVUrSa/PxO0n7czxxXWaLRDmlSULEd3R
D4pVs3zEWOBXJHUAvUQ5R+lKfkeWKNeeepeh+rezuhpdWFBRNz4Jjr5QUJ8od5xI
sIwobYmESJqTRVBHqW8g2T2/yIsFJ78GCXs8DZLe1wxh40UbxdYDTA0NDDTHKzK6
lxzBgcmKzuge+1OVmzxLouNWMnPcjFlVgXWVerpSy3/SIFFkzzUWeMbqm6hKuhOn
wAlcIgI=
=VQUc
-----END PGP SIGNATURE-----
Merge v5.6-rc5 into drm-next
Requested my mripard for some misc patches that need this as a base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5lkYceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGpHQH/RJrzcaZHo4lw88m
Jf7vBZ9DYUlRgqE0pxTHWmodNObKRqpwOUGflUcWbb/7GD2LQUfeqhSECVQyTID9
N9y7FcPvx321Qhc3EkZ24DBYk0+DQ0K2FVUrSa/PxO0n7czxxXWaLRDmlSULEd3R
D4pVs3zEWOBXJHUAvUQ5R+lKfkeWKNeeepeh+rezuhpdWFBRNz4Jjr5QUJ8od5xI
sIwobYmESJqTRVBHqW8g2T2/yIsFJ78GCXs8DZLe1wxh40UbxdYDTA0NDDTHKzK6
lxzBgcmKzuge+1OVmzxLouNWMnPcjFlVgXWVerpSy3/SIFFkzzUWeMbqm6hKuhOn
wAlcIgI=
=VQUc
-----END PGP SIGNATURE-----
Merge tag 'v5.6-rc5' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We have IORING_OP_PROVIDE_BUFFERS, but the only way to remove buffers
is to trigger IO on them. The usual case of shrinking a buffer pool
would be to just not replenish the buffers when IO completes, and
instead just free it. But it may be nice to have a way to manually
remove a number of buffers from a given group, and
IORING_OP_REMOVE_BUFFERS provides that functionality.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a server process has tons of pending socket connections, generally
it uses epoll to wait for activity. When the socket is ready for reading
(or writing), the task can select a buffer and issue a recv/send on the
given fd.
Now that we have fast (non-async thread) support, a task can have tons
of pending reads or writes pending. But that means they need buffers to
back that data, and if the number of connections is high enough, having
them preallocated for all possible connections is unfeasible.
With IORING_OP_PROVIDE_BUFFERS, an application can register buffers to
use for any request. The request then sets IOSQE_BUFFER_SELECT in the
sqe, and a given group ID in sqe->buf_group. When the fd becomes ready,
a free buffer from the specified group is selected. If none are
available, the request is terminated with -ENOBUFS. If successful, the
CQE on completion will contain the buffer ID chosen in the cqe->flags
member, encoded as:
(buffer_id << IORING_CQE_BUFFER_SHIFT) | IORING_CQE_F_BUFFER;
Once a buffer has been consumed by a request, it is no longer available
and must be registered again with IORING_OP_PROVIDE_BUFFERS.
Requests need to support this feature. For now, IORING_OP_READ and
IORING_OP_RECV support it. This is checked on SQE submission, a CQE with
res == -EOPNOTSUPP will be posted if attempted on unsupported requests.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IORING_OP_PROVIDE_BUFFERS uses the buffer registration infrastructure to
support passing in an addr/len that is associated with a buffer ID and
buffer group ID. The group ID is used to index and lookup the buffers,
while the buffer ID can be used to notify the application which buffer
in the group was used. The addr passed in is the starting buffer address,
and length is each buffer length. A number of buffers to add with can be
specified, in which case addr is incremented by length for each addition,
and each buffer increments the buffer ID specified.
No validation is done of the buffer ID. If the application provides
buffers within the same group with identical buffer IDs, then it'll have
a hard time telling which buffer ID was used. The only restriction is
that the buffer ID can be a max of 16-bits in size, so USHRT_MAX is the
maximum ID that can be used.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yishai Hadas Says:
====================
Expose raw packet pacing APIs to be used by DEVX based applications. The
existing code was refactored to have a single flow with the new raw APIs.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_packet_pacing':
IB/mlx5: Introduce UAPIs to manage packet pacing
net/mlx5: Expose raw packet pacing APIs
Introduce packet pacing uobject and its alloc and destroy
methods.
This uobject holds mlx5 packet pacing context according to the device
specification and enables managing packet pacing device entries that are
needed by DEVX applications.
Link: https://lore.kernel.org/r/20200219190518.200912-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add TCP_NLA_BYTES_NOTSENT to SCM_TIMESTAMPING_OPT_STATS that reports
bytes in the write queue but not sent. This is the same metric as
what is exported with tcp_info.tcpi_notsent_bytes.
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, user who is adding an action expects HW to report stats,
however it does not have exact expectations about the stats types.
That is aligned with TCA_ACT_HW_STATS_TYPE_ANY.
Allow user to specify the type of HW stats for an action and require it.
Pass the information down to flow_offload layer.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add "CP" to AMDGPU_GEM_CREATE_MQD_GFX9 to indicate it is only for CP MQD
buffer.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The restriction introduced in 7a0df7fbc1 ("seccomp: Make NEW_LISTENER and
TSYNC flags exclusive") is mostly artificial: there is enough information
in a seccomp user notification to tell which thread triggered a
notification. The reason it was introduced is because TSYNC makes the
syscall return a thread-id on failure, and NEW_LISTENER returns an fd, and
there's no way to distinguish between these two cases (well, I suppose the
caller could check all fds it has, then do the syscall, and if the return
value was an fd that already existed, then it must be a thread id, but
bleh).
Matthew would like to use these two flags together in the Chrome sandbox
which wants to use TSYNC for video drivers and NEW_LISTENER to proxy
syscalls.
So, let's fix this ugliness by adding another flag, TSYNC_ESRCH, which
tells the kernel to just return -ESRCH on a TSYNC error. This way,
NEW_LISTENER (and any subsequent seccomp() commands that want to return
positive values) don't conflict with each other.
Suggested-by: Matthew Denton <mpdenton@google.com>
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20200304180517.23867-1-tycho@tycho.ws
Signed-off-by: Kees Cook <keescook@chromium.org>
When multiple programs are attached, each program receives the return
value from the previous program on the stack and the last program
provides the return value to the attached function.
The fmod_ret bpf programs are run after the fentry programs and before
the fexit programs. The original function is only called if all the
fmod_ret programs return 0 to avoid any unintended side-effects. The
success value, i.e. 0 is not currently configurable but can be made so
where user-space can specify it at load time.
For example:
int func_to_be_attached(int a, int b)
{ <--- do_fentry
do_fmod_ret:
<update ret by calling fmod_ret>
if (ret != 0)
goto do_fexit;
original_function:
<side_effects_happen_here>
} <--- do_fexit
The fmod_ret program attached to this function can be defined as:
SEC("fmod_ret/func_to_be_attached")
int BPF_PROG(func_name, int a, int b, int ret)
{
// This will skip the original function logic.
return 1;
}
The first fmod_ret program is passed 0 in its return argument.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-4-kpsingh@chromium.org
bdi.
- Extend dm-bio-record to track additional struct bio members needed
by DM integrity target.
- Fix DM core to properly advertise that a device is suspended during
unload (between the presuspend and postsuspend hooks). This change
is a prereq for related DM integrity and DM writecache fixes. It
elevates DM integrity's 'suspending' state tracking to DM core.
- Four stable fixes for DM integrity target.
- Fix crash in DM cache target due to incorrect work item cancelling.
- Fix DM thin metadata lockdep warning that was introduced during 5.6
merge window.
- Fix DM zoned target's chunk work refcounting that regressed during
recent conversion to refcount_t.
- Bump the minor version for DM core and all target versions that have
seen interface changes or important fixes during the 5.6 cycle.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl5fwPgTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWnUJB/9+36J0Y3HYdUIKM8P5CBH0tdkMqSo4
BFm3Og4Xo1GA5xodNptgD+QoLXy3VWkekUsLvaLgOlPq7haPvHkME20vUMuO1l46
QMNR2VXciYGgV0+CFlpXL2oMr0ZEc1hkt7ZpzYaw1OIk6Mo0tEEDrSo0rvmXafPf
W4veTWRL4HfN8fy3NpQNJ4xBQs4Iw4VC20FPFIOvzA1EGk7VGGaP1mGKmOnjxo/O
o3lEH8NpQgwxwST7d4T6DPdeu3aTifnjdY8/h8mFGpQnxOiZ/wZkheKWwTCNE8r9
oeVY07qVxNAHyC8G/SmAL5KnC6En1hq5jA2M4xh9guUI2k8YbON571n+
=iAS0
-----END PGP SIGNATURE-----
Merge tag 'for-5.6/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix request-based DM's congestion_fn and actually wire it up to the
bdi.
- Extend dm-bio-record to track additional struct bio members needed by
DM integrity target.
- Fix DM core to properly advertise that a device is suspended during
unload (between the presuspend and postsuspend hooks). This change is
a prereq for related DM integrity and DM writecache fixes. It
elevates DM integrity's 'suspending' state tracking to DM core.
- Four stable fixes for DM integrity target.
- Fix crash in DM cache target due to incorrect work item cancelling.
- Fix DM thin metadata lockdep warning that was introduced during 5.6
merge window.
- Fix DM zoned target's chunk work refcounting that regressed during
recent conversion to refcount_t.
- Bump the minor version for DM core and all target versions that have
seen interface changes or important fixes during the 5.6 cycle.
* tag 'for-5.6/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: bump version of core and various targets
dm: fix congested_fn for request-based device
dm integrity: use dm_bio_record and dm_bio_restore
dm bio record: save/restore bi_end_io and bi_integrity
dm zoned: Fix reference counter initial value of chunk works
dm writecache: verify watermark during resume
dm: report suspended device during destroy
dm thin metadata: fix lockdep complaint
dm cache: fix a crash due to incorrect work item cancelling
dm integrity: fix invalid table returned due to argument count mismatch
dm integrity: fix a deadlock due to offloading to an incorrect workqueue
dm integrity: fix recalculation when moving from journal mode to bitmap mode
Switch BPF UAPI constants, previously defined as #define macro, to anonymous
enum values. This preserves constants values and behavior in expressions, but
has added advantaged of being captured as part of DWARF and, subsequently, BTF
type info. Which, in turn, greatly improves usefulness of generated vmlinux.h
for BPF applications, as it will not require BPF users to copy/paste various
flags and constants, which are frequently used with BPF helpers. Only those
constants that are used/useful from BPF program side are converted.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200303003233.3496043-2-andriin@fb.com
BPF programs may want to know whether an skb is gso. The canonical
answer is skb_is_gso(skb), which tests that gso_size != 0.
Expose this field in the same manner as gso_segs. That field itself
is not a sufficient signal, as the comment in skb_shared_info makes
clear: gso_segs may be zero, e.g., from dodgy sources.
Also prepare net/bpf/test_run for upcoming BPF_PROG_TEST_RUN tests
of the feature.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200303200503.226217-2-willemdebruijn.kernel@gmail.com
Currently mlx5 PCI PF and VF devlink devices register their ports as
physical port in non-representors mode.
Introduce a new port flavour as virtual so that virtual devices can
register 'virtual' flavour to make it more clear to users.
An example of one PCI PF and 2 PCI virtual functions, each having
one devlink port.
$ devlink port show
pci/0000:06:00.0/1: type eth netdev ens2f0 flavour physical port 0
pci/0000:06:00.2/1: type eth netdev ens2f2 flavour virtual port 0
pci/0000:06:00.3/1: type eth netdev ens2f3 flavour virtual port 0
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changes made during the 5.6 cycle warrant bumping the version number
for DM core and the targets modified by this commit.
It should be noted that dm-thin, dm-crypt and dm-raid already had
their target version bumped during the 5.6 merge window.
Signed-off-by; Mike Snitzer <snitzer@redhat.com>
Currently io_uring tries any request in a non-blocking manner, if it can,
and then retries from a worker thread if we get -EAGAIN. Now that we have
a new and fancy poll based retry backend, use that to retry requests if
the file supports it.
This means that, for example, an IORING_OP_RECVMSG on a socket no longer
requires an async thread to complete the IO. If we get -EAGAIN reading
from the socket in a non-blocking manner, we arm a poll handler for
notification on when the socket becomes readable. When it does, the
pending read is executed directly by the task again, through the io_uring
task work handlers. Not only is this faster and more efficient, it also
means we're not generating potentially tons of async threads that just
sit and block, waiting for the IO to complete.
The feature is marked with IORING_FEAT_FAST_POLL, meaning that async
pollable IO is fast, and that poll<link>other_op is fast as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for splice(2).
- output file is specified as sqe->fd, so it's handled by generic code
- hash_reg_file handled by generic code as well
- len is 32bit, but should be fine
- the fd_in is registered file, when SPLICE_F_FD_IN_FIXED is set, which
is a splice flag (i.e. sqe->splice_flags).
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds core id to sof_ipc_comp. The intention of this change
is to inform FW on which core that particular component
should run. Right now core id is only passed when pipeline
is created, which is not flexible enough and doesn't allow
for FW to handle this the right way.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Tomasz Lauda <tomasz.lauda@linux.intel.com>
Link: https://lore.kernel.org/r/20200228231850.9226-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-02-28
The following pull-request contains BPF updates for your *net-next* tree.
We've added 41 non-merge commits during the last 7 day(s) which contain
a total of 49 files changed, 1383 insertions(+), 499 deletions(-).
The main changes are:
1) BPF and Real-Time nicely co-exist.
2) bpftool feature improvements.
3) retrieve bpf_sk_storage via INET_DIAG.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch will dump out the bpf_sk_storages of a sk
if the request has the INET_DIAG_REQ_SK_BPF_STORAGES nlattr.
An array of SK_DIAG_BPF_STORAGE_REQ_MAP_FD can be specified in
INET_DIAG_REQ_SK_BPF_STORAGES to select which bpf_sk_storage to dump.
If no map_fd is specified, all bpf_sk_storages of a sk will be dumped.
bpf_sk_storages can be added to the system at runtime. It is difficult
to find a proper static value for cb->min_dump_alloc.
This patch learns the nlattr size required to dump the bpf_sk_storages
of a sk. If it happens to be the very first nlmsg of a dump and it
cannot fit the needed bpf_sk_storages, it will try to expand the
skb by "pskb_expand_head()".
Instead of expanding it in inet_sk_diag_fill(), it is expanded at a
sleepable context in __inet_diag_dump() so __GFP_DIRECT_RECLAIM can
be used. In __inet_diag_dump(), it will retry as long as the
skb is empty and the cb->min_dump_alloc becomes larger than before.
cb->min_dump_alloc is bounded by KMALLOC_MAX_SIZE. The min_dump_alloc
is also changed from 'u16' to 'u32' to accommodate a sk that may have
a few large bpf_sk_storages.
The updated cb->min_dump_alloc will also be used to allocate the skb in
the next dump. This logic already exists in netlink_dump().
Here is the sample output of a locally modified 'ss' and it could be made
more readable by using BTF later:
[root@arch-fb-vm1 ~]# ss --bpf-map-id 14 --bpf-map-id 13 -t6an 'dst [::1]:8989'
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
ESTAB 0 0 [::1]:51072 [::1]:8989
bpf_map_id:14 value:[ 3feb ]
bpf_map_id:13 value:[ 3f ]
ESTAB 0 0 [::1]:51070 [::1]:8989
bpf_map_id:14 value:[ 3feb ]
bpf_map_id:13 value:[ 3f ]
[root@arch-fb-vm1 ~]# ~/devshare/github/iproute2/misc/ss --bpf-maps -t6an 'dst [::1]:8989'
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
ESTAB 0 0 [::1]:51072 [::1]:8989
bpf_map_id:14 value:[ 3feb ]
bpf_map_id:13 value:[ 3f ]
bpf_map_id:12 value:[ 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000... total:65407 ]
ESTAB 0 0 [::1]:51070 [::1]:8989
bpf_map_id:14 value:[ 3feb ]
bpf_map_id:13 value:[ 3f ]
bpf_map_id:12 value:[ 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000... total:65407 ]
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200225230427.1976129-1-kafai@fb.com
This patch adds INET_DIAG support to bpf_sk_storage.
1. Although this series adds bpf_sk_storage diag capability to inet sk,
bpf_sk_storage is in general applicable to all fullsock. Hence, the
bpf_sk_storage logic will operate on SK_DIAG_* nlattr. The caller
will pass in its specific nesting nlattr (e.g. INET_DIAG_*) as
the argument.
2. The request will be like:
INET_DIAG_REQ_SK_BPF_STORAGES (nla_nest) (defined in latter patch)
SK_DIAG_BPF_STORAGE_REQ_MAP_FD (nla_put_u32)
SK_DIAG_BPF_STORAGE_REQ_MAP_FD (nla_put_u32)
......
Considering there could have multiple bpf_sk_storages in a sk,
instead of reusing INET_DIAG_INFO ("ss -i"), the user can select
some specific bpf_sk_storage to dump by specifying an array of
SK_DIAG_BPF_STORAGE_REQ_MAP_FD.
If no SK_DIAG_BPF_STORAGE_REQ_MAP_FD is specified (i.e. an empty
INET_DIAG_REQ_SK_BPF_STORAGES), it will dump all bpf_sk_storages
of a sk.
3. The reply will be like:
INET_DIAG_BPF_SK_STORAGES (nla_nest) (defined in latter patch)
SK_DIAG_BPF_STORAGE (nla_nest)
SK_DIAG_BPF_STORAGE_MAP_ID (nla_put_u32)
SK_DIAG_BPF_STORAGE_MAP_VALUE (nla_reserve_64bit)
SK_DIAG_BPF_STORAGE (nla_nest)
SK_DIAG_BPF_STORAGE_MAP_ID (nla_put_u32)
SK_DIAG_BPF_STORAGE_MAP_VALUE (nla_reserve_64bit)
......
4. Unlike other INET_DIAG info of a sk which is pretty static, the size
required to dump the bpf_sk_storage(s) of a sk is dynamic as the
system adding more bpf_sk_storage_map. It is hard to set a static
min_dump_alloc size.
Hence, this series learns it at the runtime and adjust the
cb->min_dump_alloc as it iterates all sk(s) of a system. The
"unsigned int *res_diag_size" in bpf_sk_storage_diag_put()
is for this purpose.
The next patch will update the cb->min_dump_alloc as it
iterates the sk(s).
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200225230421.1975729-1-kafai@fb.com
The INET_DIAG_REQ_BYTECODE nlattr is currently re-found every time when
the "dump()" is re-started.
In a latter patch, it will also need to parse the new
INET_DIAG_REQ_SK_BPF_STORAGES nlattr to learn the map_fds. Thus, this
patch takes this chance to store the parsed nlattr in cb->data
during the "start" time of a dump.
By doing this, the "bc" argument also becomes unnecessary
and is removed. Also, the two copies of the INET_DIAG_REQ_BYTECODE
parsing-audit logic between compat/current version can be
consolidated to one.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200225230415.1975555-1-kafai@fb.com
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200227001744.GA3317@embeddedor
Now that everything is in place, we can announce the feature.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
diag 308 subcode 0 and 1 require several KVM and Ultravisor interactions.
Specific to these "soft" reboots are
* The "unshare all" UVC
* The "prepare for reset" UVC
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Now that we can't access guest memory anymore, we have a dedicated
satellite block that's a bounce buffer for instruction data.
We re-use the memop interface to copy the instruction data to / from
userspace. This lets us re-use a lot of QEMU code which used that
interface to make logical guest memory accesses which are not possible
anymore in protected mode anyway.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This contains 3 main changes:
1. changes in SIE control block handling for secure guests
2. helper functions for create/destroy/unpack secure guests
3. KVM_S390_PV_COMMAND ioctl to allow userspace dealing with secure
machines
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If driver passed along the cookie, push it through Netlink.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow driver to indicate cookie metadata for registered traps.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* lots of small documentation fixes, from Jérôme Pouiller
* beacon protection (BIGTK) support from Jouni Malinen
* some initial code for TID configuration, from Tamizh chelvam
* I reverted some new API before it's actually used, because
it's wrong to mix controlled port and preauth
* a few other cleanups/fixes
-----BEGIN PGP SIGNATURE-----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=x0rf
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2020-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A new set of changes:
* lots of small documentation fixes, from Jérôme Pouiller
* beacon protection (BIGTK) support from Jouni Malinen
* some initial code for TID configuration, from Tamizh chelvam
* I reverted some new API before it's actually used, because
it's wrong to mix controlled port and preauth
* a few other cleanups/fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Special handling is needed in bareudp module for IP & MPLS as they
support more than one ethertypes.
MPLS has 2 ethertypes. 0x8847 for MPLS unicast and 0x8848 for MPLS multicast.
While decapsulating MPLS packet from UDP packet the tunnel destination IP
address is checked to determine the ethertype. The ethertype of the packet
will be set to 0x8848 if the tunnel destination IP address is a multicast
IP address. The ethertype of the packet will be set to 0x8847 if the
tunnel destination IP address is a unicast IP address.
IP has 2 ethertypes.0x0800 for IPV4 and 0x86dd for IPv6. The version
field of the IP header tunnelled will be checked to determine the ethertype.
This special handling to tunnel additional ethertypes will be disabled
by default and can be enabled using a flag called multiproto. This flag can
be used only with ethertypes 0x8847 and 0x0800.
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Bareudp tunnel module provides a generic L3 encapsulation
tunnelling module for tunnelling different protocols like MPLS,
IP,NSH etc inside a UDP tunnel.
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This exposes the white balance configuration of the ISC as v4l2 controls
into userspace.
There are 8 controls available:
4 gain controls, sliders, for each of the BAYER components: R, B, GR, GB.
These gains are multipliers for each component, in format unsigned 0:4:9
with a default value of 512 (1.0 multiplier).
4 offset controls, sliders, for each of the BAYER components: R, B, GR, GB.
These offsets are added/substracted from each component, in format signed
1:12:0 with a default value of 0 (+/- 0)
To expose this to userspace, added 8 custom controls, in an auto cluster.
To summarize the functionality:
The auto cluster switch is the auto white balance control, and it works
like this:
AWB == 1: autowhitebalance is on, the do_white_balance button is inactive,
the gains/offsets are inactive, but volatile and readable.
Thus, the results of the whitebalance algorithm are available to userspace
to read at any time.
AWB == 0: autowhitebalance is off, cluster is in manual mode, user can
configure the gain/offsets directly. More than that, if the
do_white_balance button is pressed, the driver will perform
one-time-adjustment, (preferably with color checker card) and the userspace
can read again the new values.
With this feature, the userspace can save the coefficients and reinstall
them for example after reboot or reprobing the driver.
[hverkuil: fix checkpatch warning]
[hverkuil: minor spacing adjustments in the functionality description]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch adds support to configure per TID RTSCTS control
configuration to enable/disable through the
NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL attribute.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-5-git-send-email-tamizhr@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch adds support to configure per TID AMPDU control
configuration to enable/disable aggregation through the
NL80211_TID_CONFIG_ATTR_AMPDU_CTRL attribute.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-4-git-send-email-tamizhr@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch adds support to configure per TID retry configuration
through the NL80211_TID_CONFIG_ATTR_RETRY_SHORT and
NL80211_TID_CONFIG_ATTR_RETRY_LONG attributes. This TID specific
retry configuration will have more precedence than phy level
configuration.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-3-git-send-email-tamizhr@codeaurora.org
[rebase completely on top of my previous API changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make some changes to the TID-config API:
* use u16 in nl80211 (only, and restrict to using 8 bits for now),
to avoid issues in the future if we ever want to use higher TIDs.
* reject empty TIDs mask (via netlink policy)
* change feature advertising to not use extended feature flags but
have own mechanism for this, which simplifies the code
* fix all variable names from 'tid' to 'tids' since it's a mask
* change to cfg80211_ name prefixes, not ieee80211_
* fix some minor docs/spelling things.
Change-Id: Ia234d464b3f914cdeab82f540e018855be580dce
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the new NL80211_CMD_SET_TID_CONFIG command to support
data TID specific configuration. Per TID configuration is
passed in the nested NL80211_ATTR_TID_CONFIG attribute.
This patch adds support to configure per TID noack policy
through the NL80211_TID_CONFIG_ATTR_NOACK attribute.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-2-git-send-email-tamizhr@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
IEEE P802.11-REVmd/D3.0 adds support for protecting Beacon frames using
a new set of keys (BIGTK; key index 6..7) similarly to the way
group-addressed Robust Management frames are protected (IGTK; key index
4..5). Extend cfg80211 and nl80211 to allow the new BIGTK to be
configured. Add an extended feature flag to indicate driver support for
the new key index values to avoid array overflows in driver
implementations and also to indicate to user space when this
functionality is available.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200222132548.20835-2-jouni@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 8c3ed7aa2b.
As Jouni points out, there's really no need for this, since the
RSN pre-authentication frames are normal data frames, not port
control frames (locally).
We can still revert this now since it hasn't actually gone beyond
-next.
Fixes: 8c3ed7aa2b ("nl80211: add src and dst addr attributes for control port tx/rx")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200224101910.b746e263287a.I9eb15d6895515179d50964dec3550c9dc784bb93@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Register qm to uacce framework for user crypto driver
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Uacce (Unified/User-space-access-intended Accelerator Framework) targets to
provide Shared Virtual Addressing (SVA) between accelerators and processes.
So accelerator can access any data structure of the main cpu.
This differs from the data sharing between cpu and io device, which share
only data content rather than address.
Since unified address, hardware and user space of process can share the
same virtual address in the communication.
Uacce create a chrdev for every registration, the queue is allocated to
the process when the chrdev is opened. Then the process can access the
hardware resource by interact with the queue file. By mmap the queue
file space to user space, the process can directly put requests to the
hardware without syscall to the kernel space.
The IOMMU core only tracks mm<->device bonds at the moment, because it
only needs to handle IOTLB invalidation and PASID table entries. However
uacce needs a finer granularity since multiple queues from the same
device can be bound to an mm. When the mm exits, all bound queues must
be stopped so that the IOMMU can safely clear the PASID table entry and
reallocate the PASID.
An intermediate struct uacce_mm links uacce devices and queues.
Note that an mm may be bound to multiple devices but an uacce_mm
structure only ever belongs to a single device, because we don't need
anything more complex (if multiple devices are bound to one mm, then
we'll create one uacce_mm for each bond).
uacce_device --+-- uacce_mm --+-- uacce_queue
| '-- uacce_queue
|
'-- uacce_mm --+-- uacce_queue
+-- uacce_queue
'-- uacce_queue
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Kenneth Lee <liguozhu@hisilicon.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-02-21
The following pull-request contains BPF updates for your *net-next* tree.
We've added 25 non-merge commits during the last 4 day(s) which contain
a total of 33 files changed, 2433 insertions(+), 161 deletions(-).
The main changes are:
1) Allow for adding TCP listen sockets into sock_map/hash so they can be used
with reuseport BPF programs, from Jakub Sitnicki.
2) Add a new bpf_program__set_attach_target() helper for adding libbpf support
to specify the tracepoint/function dynamically, from Eelco Chaudron.
3) Add bpf_read_branch_records() BPF helper which helps use cases like profile
guided optimizations, from Daniel Xu.
4) Enable bpf_perf_event_read_value() in all tracing programs, from Song Liu.
5) Relax BTF mandatory check if only used for libbpf itself e.g. to process
BTF defined maps, from Andrii Nakryiko.
6) Move BPF selftests -mcpu compilation attribute from 'probe' to 'v3' as it has
been observed that former fails in envs with low memlock, from Yonghong Song.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are a number of small USB driver fixes for 5.6-rc3.
Included in here are:
- MAINTAINER file updates
- USB gadget driver fixes
- usb core quirk additions and fixes for regressions
- xhci driver fixes
- usb serial driver id additions and fixes
- thunderbolt bugfix
Thunderbolt patches come in through here now that USB4 is really
thunderbolt.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXk+/zw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynQywCeOlklNLcTKw/JkbsbtMlY/yTl4W8AoLLoEgSy
GyUV8E67wZNdXLKH+n14
=o97t
-----END PGP SIGNATURE-----
Merge tag 'usb-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.6-rc3.
Included in here are:
- MAINTAINER file updates
- USB gadget driver fixes
- usb core quirk additions and fixes for regressions
- xhci driver fixes
- usb serial driver id additions and fixes
- thunderbolt bugfix
Thunderbolt patches come in through here now that USB4 is really
thunderbolt.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (34 commits)
USB: misc: iowarrior: add support for the 100 device
thunderbolt: Prevent crash if non-active NVMem file is read
usb: gadget: udc-xilinx: Fix xudc_stop() kernel-doc format
USB: misc: iowarrior: add support for the 28 and 28L devices
USB: misc: iowarrior: add support for 2 OEMed devices
USB: Fix novation SourceControl XL after suspend
xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2
Revert "xhci: Fix memory leak when caching protocol extended capability PSI tables"
MAINTAINERS: Sort entries in database for THUNDERBOLT
usb: dwc3: debug: fix string position formatting mixup with ret and len
usb: gadget: serial: fix Tx stall after buffer overflow
usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flows
usb: dwc2: Fix in ISOC request length checking
usb: gadget: composite: Support more than 500mA MaxPower
usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus
usb: gadget: u_audio: Fix high-speed max packet size
usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields
USB: core: clean up endpoint-descriptor parsing
USB: quirks: blacklist duplicate ep on Sound Devices USBPre2
...
Pull networking fixes from David Miller:
1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
Cong Wang.
2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
is finished, from Magnus Karlsson.
3) Set table field properly to RT_TABLE_COMPAT when necessary, from
Jethro Beekman.
4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
that in IFLA_ALT_IFNAME. From Eric Dumazet.
5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.
6) Handle mtu==0 devices properly in wireguard, from Jason A.
Donenfeld.
7) Fix several lockdep warnings in bonding, from Taehee Yoo.
8) Fix cls_flower port blocking, from Jason Baron.
9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.
10) Fix RDMA race in qede driver, from Michal Kalderon.
11) Fix several false lockdep warnings by adding conditions to
list_for_each_entry_rcu(), from Madhuparna Bhowmik.
12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.
13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.
14) Hey, variables declared in switch statement before any case
statements are not initialized. I learn something every day. Get
rids of this stuff in several parts of the networking, from Kees
Cook.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
bnxt_en: Improve device shutdown method.
net: netlink: cap max groups which will be considered in netlink_bind()
net: thunderx: workaround BGX TX Underflow issue
ionic: fix fw_status read
net: disable BRIDGE_NETFILTER by default
net: macb: Properly handle phylink on at91rm9200
s390/qeth: fix off-by-one in RX copybreak check
s390/qeth: don't warn for napi with 0 budget
s390/qeth: vnicc Fix EOPNOTSUPP precedence
openvswitch: Distribute switch variables for initialization
net: ip6_gre: Distribute switch variables for initialization
net: core: Distribute switch variables for initialization
udp: rehash on disconnect
net/tls: Fix to avoid gettig invalid tls record
bpf: Fix a potential deadlock with bpf_map_do_batch
bpf: Do not grab the bucket spinlock by default on htab batch ops
ice: Wait for VF to be reset/ready before configuration
ice: Don't tell the OS that link is going down
ice: Don't reject odd values of usecs set by user
...
QEMU has a funny new build error message when I use the upstream kernel
headers:
CC block/file-posix.o
In file included from /home/cborntra/REPOS/qemu/include/qemu/timer.h:4,
from /home/cborntra/REPOS/qemu/include/qemu/timed-average.h:29,
from /home/cborntra/REPOS/qemu/include/block/accounting.h:28,
from /home/cborntra/REPOS/qemu/include/block/block_int.h:27,
from /home/cborntra/REPOS/qemu/block/file-posix.c:30:
/usr/include/linux/swab.h: In function `__swab':
/home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:34: error: "sizeof" is not defined, evaluates to 0 [-Werror=undef]
20 | #define BITS_PER_LONG (sizeof (unsigned long) * BITS_PER_BYTE)
| ^~~~~~
/home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:41: error: missing binary operator before token "("
20 | #define BITS_PER_LONG (sizeof (unsigned long) * BITS_PER_BYTE)
| ^
cc1: all warnings being treated as errors
make: *** [/home/cborntra/REPOS/qemu/rules.mak:69: block/file-posix.o] Error 1
rm tests/qemu-iotests/socket_scm_helper.o
This was triggered by commit d5767057c9 ("uapi: rename ext2_swab() to
swab() and share globally in swab.h"). That patch is doing
#include <asm/bitsperlong.h>
but it uses BITS_PER_LONG.
The kernel file asm/bitsperlong.h provide only __BITS_PER_LONG.
Let us use the __ variant in swap.h
Link: http://lkml.kernel.org/r/20200213142147.17604-1-borntraeger@de.ibm.com
Fixes: d5767057c9 ("uapi: rename ext2_swab() to swab() and share globally in swab.h")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are no in-kernel users remaining, but there may still be users that
include linux/time.h instead of sys/time.h from user space, so leave the
types available to user space while hiding them from kernel space.
Only the __kernel_old_* versions of these types remain now.
Link: http://lkml.kernel.org/r/20200110154232.4104492-4-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The presence detect state (PDS) is normally a logical OR of in-band and
out-of-band (OOB) presence detect. As of PCIe 4.0, there is the option to
disable in-band presence so that the PDS bit always reflects the state of
the out-of-band presence.
The recommendation of the PCIe spec is to disable in-band presence whenever
supported (PCIe r5.0, appendix I implementation note):
Due to architectural issues, the in-band (Physical-Layer-based) portion
of the PD mechanism is deprecated for use with async hot-plug. One issue
is that in-band PD as architected does not detect adapter removal during
certain LTSSM states, notably the L1 and Disabled States. Another issue
is that when both in-band and OOB PD are being used together, the
Presence Detect State bit and its associated interrupt mechanism always
reflect the logical OR of the inband and OOB PD states, and with some
hot-plug hardware configurations, it is important for software to detect
and respond to in-band and OOB PD events independently. If OOB PD is
being used and the associated DSP supports In-Band PD Disable, it is
recommended that the In-Band PD Disable bit be Set, and the Presence
Detect State bit and its associated interrupt mechanism be used
exclusively for OOB PD. As a substitute for in-band PD with async
hot-plug, the reference model uses either the DPC or the DLL Link Active
mechanism.
Link: https://lore.kernel.org/r/20191025190047.38130-2-stuart.w.hayes@gmail.com
[bhelgaas: move PCI_EXP_SLTCAP2 read earlier & print PCI_EXP_SLTCAP2_IBPD
value (suggested by Lukas)]
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
UAPI Changes:
- lima: Add support for heap buffers
Cross-subsystem Changes:
Core Changes:
- Implement mode_config mode_valid for memory constrained drivers
- Bus format negociation between bridges
- Consolidate fake vblank events for drivers without vblank interrupts
- drm/bufs: dma_alloc related cleanups
- drm/dp_mst: Various fixes
- drm/print: New drm_device based print helpers
- Thomas is a drm-misc maintainer now!
Driver Changes:
- DPMS cleanups for atomic drivers
- Removal of owner field in SPI tinydrm drivers
- Removal of explicit dependency on DT for tinydrm drivers
- Conversion to YAML schemas for DT bindings
- tidss: New driver
- virtio: various reworks and fixes
- Our usual dozen or so new panels or bridges
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXkEjOgAKCRDj7w1vZxhR
xeaDAQD+1MludG4RmfQhATe4jTsPC1r2x63OF2CA0ChMGHXJyQEA8qqQ+8y1Cd/u
PZ3PpcTl4qYYHgzJ6FwW7kDPTvlaZQE=
=IJAt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-02-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.7:
UAPI Changes:
- lima: Add support for heap buffers
Cross-subsystem Changes:
Core Changes:
- Implement mode_config mode_valid for memory constrained drivers
- Bus format negociation between bridges
- Consolidate fake vblank events for drivers without vblank interrupts
- drm/bufs: dma_alloc related cleanups
- drm/dp_mst: Various fixes
- drm/print: New drm_device based print helpers
- Thomas is a drm-misc maintainer now!
Driver Changes:
- DPMS cleanups for atomic drivers
- Removal of owner field in SPI tinydrm drivers
- Removal of explicit dependency on DT for tinydrm drivers
- Conversion to YAML schemas for DT bindings
- tidss: New driver
- virtio: various reworks and fixes
- Our usual dozen or so new panels or bridges
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210093421.xu4sofldm6wm6xq6@gilmour.lan
Alexei Starovoitov says:
====================
pull-request: bpf 2020-02-19
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 93 insertions(+), 31 deletions(-).
The main changes are:
1) batched bpf hashtab fixes from Brian and Yonghong.
2) various selftests and libbpf fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Branch records are a CPU feature that can be configured to record
certain branches that are taken during code execution. This data is
particularly interesting for profile guided optimizations. perf has had
branch record support for a while but the data collection can be a bit
coarse grained.
We (Facebook) have seen in experiments that associating metadata with
branch records can improve results (after postprocessing). We generally
use bpf_probe_read_*() to get metadata out of userspace. That's why bpf
support for branch records is useful.
Aside from this particular use case, having branch data available to bpf
progs can be useful to get stack traces out of userspace applications
that omit frame pointers.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200218030432.4600-2-dxu@dxuuu.xyz
Add support for low latency Reed Solomon FEC as LLRS.
The LL-FEC is defined by the 25G/50G ethernet consortium,
in the document titled "Low Latency Reed Solomon Forward Error Correction"
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
CC: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
This batch contains Netfilter fixes for net:
1) Restrict hashlimit size to 1048576, from Cong Wang.
2) Check for offload flags from nf_flow_table_offload_setup(),
this fixes a crash in case the hardware offload is disabled.
From Florian Westphal.
3) Three preparation patches to extend the conntrack clash resolution,
from Florian.
4) Extend clash resolution to deal with DNS packets from the same flow
racing to set up the NAT configuration.
5) Small documentation fix in pipapo, from Stefano Brivio.
6) Remove misleading unlikely() from pipapo_refill(), also from Stefano.
7) Reduce hashlimit mutex scope, from Cong Wang. This patch is actually
triggering another problem, still under discussion, another patch to
fix this will follow up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The performance of bpf_redirect() is now roughly the same as that of
bpf_redirect_map(). However, David Ahern pointed out that the header file
has not been updated to reflect this, and still says that a significant
performance increase is possible when using bpf_redirect_map(). Remove this
text from the bpf_redirect_map() description, and reword the description in
bpf_redirect() slightly. Also fix the 'Return' section of the
bpf_redirect_map() documentation.
Fixes: 1d233886dd ("xdp: Use bulking for non-map XDP_REDIRECT and consolidate code paths")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200218130334.29889-1-toke@redhat.com
Update the FC headers for the RDF ELS and populate out the FPIN ELS and the
Link integrity FPIN payload.
RDF is used to register for diagnostic events.
FPIN is how the fabric reports a diagnostic event.
Specifically, this patch:
- Adds the formal definition of TLV descriptors that are now used in a lot
of the FC spec. The simplistic fc_fn_desc structure, basically no more
than the tlv definition, is removed.
- Small tlv helper functions are added as defines.
- The list of known Descriptor tags (identifying the TLV) is expanded and
a name initializer introduced.
- The LSRI descriptor, returned in many new ELS response payloads is
added.
- The RDF ELS code is added, and the RDF request response structures
added.
- The FPIN els definition is corrected.
- A full definition of a Link Integrity Notification descriptor is added,
[mkp: rolled in kbuild warning fix]
Link: https://lore.kernel.org/r/20200210173155.547-2-jsmart2021@gmail.com
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch further relaxes the need to drop an skb due to a clash with
an existing conntrack entry.
Current clash resolution handles the case where the clash occurs between
two identical entries (distinct nf_conn objects with same tuples), i.e.:
Original Reply
existing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353
clashing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353
... existing handling will discard the unconfirmed clashing entry and
makes skb->_nfct point to the existing one. The skb can then be
processed normally just as if the clash would not have existed in the
first place.
For other clashes, the skb needs to be dropped.
This frequently happens with DNS resolvers that send A and AAAA queries
back-to-back when NAT rules are present that cause packets to get
different DNAT transformations applied, for example:
-m statistics --mode random ... -j DNAT --dnat-to 10.0.0.6:5353
-m statistics --mode random ... -j DNAT --dnat-to 10.0.0.7:5353
In this case the A or AAAA query is dropped which incurs a costly
delay during name resolution.
This patch also allows this collision type:
Original Reply
existing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353
clashing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.7:5353
In this case, clash is in original direction -- the reply direction
is still unique.
The change makes it so that when the 2nd colliding packet is received,
the clashing conntrack is tagged with new IPS_NAT_CLASH_BIT, gets a fixed
1 second timeout and is inserted in the reply direction only.
The entry is hidden from 'conntrack -L', it will time out quickly
and it can be early dropped because it will never progress to the
ASSURED state.
To avoid special-casing the delete code path to special case
the ORIGINAL hlist_nulls node, a new helper, "hlist_nulls_add_fake", is
added so hlist_nulls_del() will work.
Example:
CPU A: CPU B:
1. 10.2.3.4:42 -> 10.8.8.8:53 (A)
2. 10.2.3.4:42 -> 10.8.8.8:53 (AAAA)
3. Apply DNAT, reply changed to 10.0.0.6
4. 10.2.3.4:42 -> 10.8.8.8:53 (AAAA)
5. Apply DNAT, reply changed to 10.0.0.7
6. confirm/commit to conntrack table, no collisions
7. commit clashing entry
Reply comes in:
10.2.3.4:42 <- 10.0.0.6:5353 (A)
-> Finds a conntrack, DNAT is reversed & packet forwarded to 10.2.3.4:42
10.2.3.4:42 <- 10.0.0.7:5353 (AAAA)
-> Finds a conntrack, DNAT is reversed & packet forwarded to 10.2.3.4:42
The conntrack entry is deleted from table, as it has the NAT_CLASH
bit set.
In case of a retransmit from ORIGINAL dir, all further packets will get
the DNAT transformation to 10.0.0.6.
I tried to come up with other solutions but they all have worse
problems.
Alternatives considered were:
1. Confirm ct entries at allocation time, not in postrouting.
a. will cause uneccesarry work when the skb that creates the
conntrack is dropped by ruleset.
b. in case nat is applied, ct entry would need to be moved in
the table, which requires another spinlock pair to be taken.
c. breaks the 'unconfirmed entry is private to cpu' assumption:
we would need to guard all nfct->ext allocation requests with
ct->lock spinlock.
2. Make the unconfirmed list a hash table instead of a pcpu list.
Shares drawback c) of the first alternative.
3. Document this is expected and force users to rearrange their
ruleset (e.g. by using "-m cluster" instead of "-m statistics").
nft has the 'jhash' expression which can be used instead of 'numgen'.
Major drawback: doesn't fix what I consider a bug, not very realistic
and I believe its reasonable to have the existing rulesets to 'just
work'.
4. Document this is expected and force users to steer problematic
packets to the same CPU -- this would serialize the "allocate new
conntrack entry/nat table evaluation/perform nat/confirm entry", so
no race can occur. Similar drawback to 3.
Another advantage of this patch compared to 1) and 2) is that there are
no changes to the hot path; things are handled in the udp tracker and
the clash resolution path.
Cc: rcu@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
New action to decrement TTL instead of setting it to a fixed value.
This action will decrement the TTL and, in case of expired TTL, drop it
or execute an action passed via a nested attribute.
The default TTL expired action is to drop the packet.
Supports both IPv4 and IPv6 via the ttl and hop_limit fields, respectively.
Tested with a corresponding change in the userspace:
# ovs-dpctl dump-flows
in_port(2),eth(),eth_type(0x0800), packets:0, bytes:0, used:never, actions:dec_ttl{ttl<=1 action:(drop)},1
in_port(1),eth(),eth_type(0x0800), packets:0, bytes:0, used:never, actions:dec_ttl{ttl<=1 action:(drop)},2
in_port(1),eth(),eth_type(0x0806), packets:0, bytes:0, used:never, actions:2
in_port(2),eth(),eth_type(0x0806), packets:0, bytes:0, used:never, actions:1
# ping -c1 192.168.0.2 -t 42
IP (tos 0x0, ttl 41, id 61647, offset 0, flags [DF], proto ICMP (1), length 84)
192.168.0.1 > 192.168.0.2: ICMP echo request, id 386, seq 1, length 64
# ping -c1 192.168.0.2 -t 120
IP (tos 0x0, ttl 119, id 62070, offset 0, flags [DF], proto ICMP (1), length 84)
192.168.0.1 > 192.168.0.2: ICMP echo request, id 388, seq 1, length 64
# ping -c1 192.168.0.2 -t 1
#
Co-developed-by: Bindiya Kurle <bindiyakurle@gmail.com>
Signed-off-by: Bindiya Kurle <bindiyakurle@gmail.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset is intended to reduce the number of extra system calls
imposed by TCP receive zerocopy. For ping-pong RPC style workloads,
this patchset has demonstrated a system call reduction of about 30%
when coupled with userspace changes.
For applications using epoll, returning sk_err along with the result
of tcp receive zerocopy could remove the need to call
recvmsg()=-EAGAIN after a spurious wakeup.
Consider a multi-threaded application using epoll. A thread may awaken
with EPOLLIN but another thread may already be reading. The
spuriously-awoken thread does not necessarily know that another thread
'won'; rather, it may be possible that it was woken up due to the
presence of an error if there is no data. A zerocopy read receiving 0
bytes thus would need to be followed up by recvmsg to be sure.
Instead, we return sk_err directly with zerocopy, so the application
can avoid this extra system call.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset is intended to reduce the number of extra system calls
imposed by TCP receive zerocopy. For ping-pong RPC style workloads,
this patchset has demonstrated a system call reduction of about 30%
when coupled with userspace changes.
For applications using edge-triggered epoll, returning inq along with
the result of tcp receive zerocopy could remove the need to call
recvmsg()=-EAGAIN after a successful zerocopy. Generally speaking,
since normally we would need to perform a recvmsg() call for every
successful small RPC read via TCP receive zerocopy, returning inq can
reduce the number of system calls performed by approximately half.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 802.11 frame encapsulation offload support
* more HE (802.11ax) support, including some for 6 GHz band
* powersave in hwsim, for better testing
Of course as usual there are various cleanups and small fixes.
-----BEGIN PGP SIGNATURE-----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=CgmJ
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2020-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A few big new things:
* 802.11 frame encapsulation offload support
* more HE (802.11ax) support, including some for 6 GHz band
* powersave in hwsim, for better testing
Of course as usual there are various cleanups and small fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for creating a process in a different cgroup than its
parent. Callers can limit and account processes and threads right from
the moment they are spawned:
- A service manager can directly spawn new services into dedicated
cgroups.
- A process can be directly created in a frozen cgroup and will be
frozen as well.
- The initial accounting jitter experienced by process supervisors and
daemons is eliminated with this.
- Threaded applications or even thread implementations can choose to
create a specific cgroup layout where each thread is spawned
directly into a dedicated cgroup.
This feature is limited to the unified hierarchy. Callers need to pass
a directory file descriptor for the target cgroup. The caller can
choose to pass an O_PATH file descriptor. All usual migration
restrictions apply, i.e. there can be no processes in inner nodes. In
general, creating a process directly in a target cgroup adheres to all
migration restrictions.
One of the biggest advantages of this feature is that CLONE_INTO_GROUP does
not need to grab the write side of the cgroup cgroup_threadgroup_rwsem.
This global lock makes moving tasks/threads around super expensive. With
clone3() this lock is avoided.
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: cgroups@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently there is no way for user-space to be informed about changes
in status of GPIO lines e.g. when someone else requests the line or its
config changes. We can only periodically re-read the line-info. This
is fine for simple one-off user-space tools, but any daemon that provides
a centralized access to GPIO chips would benefit hugely from an event
driven line info synchronization.
This patch adds a new ioctl() that allows user-space processes to reuse
the file descriptor associated with the character device for watching
any changes in line properties. Every such event contains the updated
line information.
Currently the events are generated on three types of status changes: when
a line is requested, when it's released and when its config is changed.
The first two are self-explanatory. For the third one: this will only
happen when another user-space process calls the new SET_CONFIG ioctl()
as any changes that can happen from within the kernel (i.e.
set_transitory() or set_debounce()) are of no interest to user-space.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The low level index is the index in the underlying hardware buffer of
the most recently captured taken branch which is always saved in
branch_entries[0]. It is very useful for reconstructing the call stack.
For example, in Intel LBR call stack mode, the depth of reconstructed
LBR call stack limits to the number of LBR registers. With the low level
index information, perf tool may stitch the stacks of two samples. The
reconstructed LBR call stack can break the HW limitation.
Add a new branch sample type to retrieve low level index of raw branch
records. The low level index is between -1 (unknown) and max depth which
can be retrieved in /sys/devices/cpu/caps/branches.
Only when the new branch sample type is set, the low level index
information is dumped into the PERF_SAMPLE_BRANCH_STACK output.
Perf tool should check the attr.branch_sample_type, and apply the
corresponding format for PERF_SAMPLE_BRANCH_STACK samples.
Otherwise, some user case may be broken. For example, users may parse a
perf.data, which include the new branch sample type, with an old version
perf tool (without the check). Users probably get incorrect information
without any warning.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200127165355.27495-2-kan.liang@linux.intel.com
To work properly on every architectures and compilers, the enum value
needs to be specific numbers.
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1580537624-10179-1-git-send-email-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zonefs is a very simple file system exposing each zone of a zoned block
device as a file.
Unlike a regular file system with native zoned block device support
(e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
sequential write constraint of zoned block devices to the user. As a
result, zonefs is not a POSIX compliant file system. Its goal is to
simplify the implementation of zoned block devices support in
applications by replacing raw block device file accesses with a richer
file based API, avoiding relying on direct block device file ioctls
which may be more obscure to developers.
One example of this approach is the implementation of LSM
(log-structured merge) tree structures (such as used in RocksDB and
LevelDB) on zoned block devices by allowing SSTables to be stored in a
zone file similarly to a regular file system rather than as a range of
sectors of a zoned device. The introduction of the higher level
construct "one file is one zone" can help reducing the amount of changes
needed in the application while at the same time allowing the use of
zoned block devices with various programming languages other than C.
Zonefs IO management implementation uses the new iomap generic code.
Zonefs has been successfully tested using a functional test suite
(available with zonefs userland format tool on github) and a prototype
implementation of LevelDB on top of zonefs.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCXj1y8QAKCRDdoc3SxdoY
dqozAP9J3t+Q95BgKgI5jP+XEtyYsPBTaVrvaSaViEnwtJLVoQD/ZQ1lTCZSE9OI
UkvWawkuFtLGfOxTqyA3eZrZi22Ttwk=
=YVvO
-----END PGP SIGNATURE-----
Merge tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull new zonefs file system from Damien Le Moal:
"Zonefs is a very simple file system exposing each zone of a zoned
block device as a file.
Unlike a regular file system with native zoned block device support
(e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
sequential write constraint of zoned block devices to the user. As a
result, zonefs is not a POSIX compliant file system. Its goal is to
simplify the implementation of zoned block devices support in
applications by replacing raw block device file accesses with a richer
file based API, avoiding relying on direct block device file ioctls
which may be more obscure to developers.
One example of this approach is the implementation of LSM
(log-structured merge) tree structures (such as used in RocksDB and
LevelDB) on zoned block devices by allowing SSTables to be stored in a
zone file similarly to a regular file system rather than as a range of
sectors of a zoned device. The introduction of the higher level
construct "one file is one zone" can help reducing the amount of
changes needed in the application while at the same time allowing the
use of zoned block devices with various programming languages other
than C.
Zonefs IO management implementation uses the new iomap generic code.
Zonefs has been successfully tested using a functional test suite
(available with zonefs userland format tool on github) and a prototype
implementation of LevelDB on top of zonefs"
* tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Add documentation
fs: New zonefs file system
When using control port over nl80211 in AP mode with
pre-authentication, APs need to forward frames to other
APs defined by their MAC address. Before this patch,
pre-auth frames reaching user space over nl80211 control
port have no longer any information about the dest attached,
which can be used for forwarding to a controller or injecting
the frame back to a ethernet interface over a AF_PACKET
socket.
Analog problems exist, when forwarding pre-auth frames from
AP -> STA.
This patch therefore adds the NL80211_ATTR_DST_MAC and
NL80211_ATTR_SRC_MAC attributes to provide more context
information when forwarding.
The respective arguments are optional on tx and included on rx.
Therefore unaware existing software is not affected.
Software which wants to detect this feature, can do so
by checking against:
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_MAC_ADDRS
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200115125522.3755-1-markus.theil@tu-ilmenau.de
[split into separate cfg80211/mac80211 patches]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit ab4dfa2053 ("cfg80211: Allow drivers to advertise supported AKM
suites") introduces the support to advertize supported AKMs to userspace.
This needs an enhancement to advertize the AKM support per interface type,
specifically for the cfg80211-based drivers that implement SME and use
different mechanisms to support the AKM's for each interface type (e.g.,
the support for SAE, OWE AKM's take different paths for such drivers on
STA/AP mode).
This commit aims the same and enhances the earlier mechanism of advertizing
the AKMs per wiphy. Add new nl80211 attributes and data structure to
provide supported AKMs per interface type to userspace.
the AKMs advertized in akm_suites are default capabilities if not
advertized for a specific interface type in iftype_akm_suites.
Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
Link: https://lore.kernel.org/r/20200126203032.21934-1-vjakkam@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The regulatory domain might forbid HE operation. Certain regulatory
domains may restrict it for specific channels whereas others may do it
for the whole regulatory domain.
Add an option to indicate it in the channel flag.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200121081213.733757-1-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
zonefs is a very simple file system exposing each zone of a zoned block
device as a file. Unlike a regular file system with zoned block device
support (e.g. f2fs), zonefs does not hide the sequential write
constraint of zoned block devices to the user. Files representing
sequential write zones of the device must be written sequentially
starting from the end of the file (append only writes).
As such, zonefs is in essence closer to a raw block device access
interface than to a full featured POSIX file system. The goal of zonefs
is to simplify the implementation of zoned block device support in
applications by replacing raw block device file accesses with a richer
file API, avoiding relying on direct block device file ioctls which may
be more obscure to developers. One example of this approach is the
implementation of LSM (log-structured merge) tree structures (such as
used in RocksDB and LevelDB) on zoned block devices by allowing SSTables
to be stored in a zone file similarly to a regular file system rather
than as a range of sectors of a zoned device. The introduction of the
higher level construct "one file is one zone" can help reducing the
amount of changes needed in the application as well as introducing
support for different application programming languages.
Zonefs on-disk metadata is reduced to an immutable super block to
persistently store a magic number and optional feature flags and
values. On mount, zonefs uses blkdev_report_zones() to obtain the device
zone configuration and populates the mount point with a static file tree
solely based on this information. E.g. file sizes come from the device
zone type and write pointer offset managed by the device itself.
The zone files created on mount have the following characteristics.
1) Files representing zones of the same type are grouped together
under a common sub-directory:
* For conventional zones, the sub-directory "cnv" is used.
* For sequential write zones, the sub-directory "seq" is used.
These two directories are the only directories that exist in zonefs.
Users cannot create other directories and cannot rename nor delete
the "cnv" and "seq" sub-directories.
2) The name of zone files is the number of the file within the zone
type sub-directory, in order of increasing zone start sector.
3) The size of conventional zone files is fixed to the device zone size.
Conventional zone files cannot be truncated.
4) The size of sequential zone files represent the file's zone write
pointer position relative to the zone start sector. Truncating these
files is allowed only down to 0, in which case, the zone is reset to
rewind the zone write pointer position to the start of the zone, or
up to the zone size, in which case the file's zone is transitioned
to the FULL state (finish zone operation).
5) All read and write operations to files are not allowed beyond the
file zone size. Any access exceeding the zone size is failed with
the -EFBIG error.
6) Creating, deleting, renaming or modifying any attribute of files and
sub-directories is not allowed.
7) There are no restrictions on the type of read and write operations
that can be issued to conventional zone files. Buffered, direct and
mmap read & write operations are accepted. For sequential zone files,
there are no restrictions on read operations, but all write
operations must be direct IO append writes. mmap write of sequential
files is not allowed.
Several optional features of zonefs can be enabled at format time.
* Conventional zone aggregation: ranges of contiguous conventional
zones can be aggregated into a single larger file instead of the
default one file per zone.
* File ownership: The owner UID and GID of zone files is by default 0
(root) but can be changed to any valid UID/GID.
* File access permissions: the default 640 access permissions can be
changed.
The mkzonefs tool is used to format zoned block devices for use with
zonefs. This tool is available on Github at:
git@github.com:damien-lemoal/zonefs-tools.git.
zonefs-tools also includes a test suite which can be run against any
zoned block device, including null_blk block device created with zoned
mode.
Example: the following formats a 15TB host-managed SMR HDD with 256 MB
zones with the conventional zones aggregation feature enabled.
$ sudo mkzonefs -o aggr_cnv /dev/sdX
$ sudo mount -t zonefs /dev/sdX /mnt
$ ls -l /mnt/
total 0
dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv
dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq
The size of the zone files sub-directories indicate the number of files
existing for each type of zones. In this example, there is only one
conventional zone file (all conventional zones are aggregated under a
single file).
$ ls -l /mnt/cnv
total 137101312
-rw-r----- 1 root root 140391743488 Nov 25 13:23 0
This aggregated conventional zone file can be used as a regular file.
$ sudo mkfs.ext4 /mnt/cnv/0
$ sudo mount -o loop /mnt/cnv/0 /data
The "seq" sub-directory grouping files for sequential write zones has
in this example 55356 zones.
$ ls -lv /mnt/seq
total 14511243264
-rw-r----- 1 root root 0 Nov 25 13:23 0
-rw-r----- 1 root root 0 Nov 25 13:23 1
-rw-r----- 1 root root 0 Nov 25 13:23 2
...
-rw-r----- 1 root root 0 Nov 25 13:23 55354
-rw-r----- 1 root root 0 Nov 25 13:23 55355
For sequential write zone files, the file size changes as data is
appended at the end of the file, similarly to any regular file system.
$ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct
1+0 records in
1+0 records out
4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0
The written file can be truncated to the zone size, preventing any
further write operation.
$ truncate -s 268435456 /mnt/seq/0
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0
Truncation to 0 size allows freeing the file zone storage space and
restart append-writes to the file.
$ truncate -s 0 /mnt/seq/0
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0
Since files are statically mapped to zones on the disk, the number of
blocks of a file as reported by stat() and fstat() indicates the size
of the file zone.
$ stat /mnt/seq/0
File: /mnt/seq/0
Size: 0 Blocks: 524288 IO Block: 4096 regular empty file
Device: 870h/2160d Inode: 50431 Links: 1
Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2019-11-25 13:23:57.048971997 +0900
Modify: 2019-11-25 13:52:25.553805765 +0900
Change: 2019-11-25 13:52:25.553805765 +0900
Birth: -
The number of blocks of the file ("Blocks") in units of 512B blocks
gives the maximum file size of 524288 * 512 B = 256 MB, corresponding
to the device zone size in this example. Of note is that the "IO block"
field always indicates the minimum IO size for writes and corresponds
to the device physical sector size.
This code contains contributions from:
* Johannes Thumshirn <jthumshirn@suse.de>,
* Darrick J. Wong <darrick.wong@oracle.com>,
* Christoph Hellwig <hch@lst.de>,
* Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and
* Ting Yao <tingyao@hust.edu.cn>.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
* fix register corruption
* ENOTSUPP/EOPNOTSUPP mixed
* reset cleanups/fixes
* selftests
x86:
* Bug fixes and cleanups
* AMD support for APIC virtualization even in combination with
in-kernel PIT or IOAPIC.
MIPS:
* Compilation fix.
Generic:
* Fix refcount overflow for zero page.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeOuf7AAoJEL/70l94x66DOBQH/j1W9lUpbDgr9aWbrZT+O/yP
FWzUDrRlCZCjV1FQKbGPa4YLeDRTG5n+RIQTjmCGRqiMqeoELSJ1+iK99e97nG/u
L28zf/90Nf0R+wwHL4AOFeploTYfG4WP8EVnlr3CG2UCJrNjxN1KU7yRZoWmWa2d
ckLJ8ouwNvx6VZd233LVmT38EP4352d1LyqIL8/+oXDIyAcRJLFQu1gRCwagsh3w
1v1czowFpWnRQ/z9zU7YD+PA4v85/Ge8sVVHlpi1X5NgV/khk4U6B0crAw6M+la+
mTmpz9g56oAh9m9NUdtv4zDCz1EWGH0v8+ZkAajUKtrM0ftJMn57P6p8PH4VVlE=
=5+Wl
-----END PGP SIGNATURE-----
Merge tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"s390:
- fix register corruption
- ENOTSUPP/EOPNOTSUPP mixed
- reset cleanups/fixes
- selftests
x86:
- Bug fixes and cleanups
- AMD support for APIC virtualization even in combination with
in-kernel PIT or IOAPIC.
MIPS:
- Compilation fix.
Generic:
- Fix refcount overflow for zero page"
* tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration
KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit
x86: vmxfeatures: rename features for consistency with KVM and manual
KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses
KVM: x86: Fix perfctr WRMSR for running counters
x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests
x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()
kvm: mmu: Separate generating and setting mmio ptes
kvm: mmu: Replace unsigned with unsigned int for PTE access
KVM: nVMX: Remove stale comment from nested_vmx_load_cr3()
KVM: MIPS: Fold comparecount_func() into comparecount_wakeup()
KVM: MIPS: Fix a build error due to referencing not-yet-defined function
x86/kvm: do not setup pv tlb flush when not paravirtualized
KVM: fix overflow of zero page refcount with ksm running
KVM: x86: Take a u64 when checking for a valid dr7 value
KVM: x86: use raw clock values consistently
KVM: x86: reorganize pvclock_gtod_data members
KVM: nVMX: delete meaningless nested_vmx_run() declaration
KVM: SVM: allow AVIC without split irqchip
kvm: ioapic: Lazy update IOAPIC EOI
...
A collection of pending small fixes since the previous PR.
ALSA core:
- PCM memory leak fix
ASoC:
- Lots of SOF and Intel driver fixes
- Addition of COMMON_CLK for wcd934x
- Regression fixes for AMD and Tegra platforms
HD-audio:
- DP-MST HDMI regression fix, Tegra workarounds, HP quirk fix
Others:
- A few fixes relevant with the recent uapi-updates
- Sparse warnings and endianness fixes
-----BEGIN PGP SIGNATURE-----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=Mcey
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of pending small fixes:
ALSA core:
- PCM memory leak fix
ASoC:
- Lots of SOF and Intel driver fixes
- Addition of COMMON_CLK for wcd934x
- Regression fixes for AMD and Tegra platforms
HD-audio:
- DP-MST HDMI regression fix, Tegra workarounds, HP quirk fix
Others:
- A few fixes relevant with the recent uapi-updates
- Sparse warnings and endianness fixes"
* tag 'sound-fix-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda: Clear RIRB status before reading WP
ALSA: hda/realtek - Fixed one of HP ALC671 platform Headset Mic supported
ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECS
ALSA: hda - Fix DP-MST support for NVIDIA codecs
ASoC: wcd934x: Add missing COMMON_CLK dependency
MAINTAINERS: Remove the Bard Liao from the MAINTAINERS of Realtek CODECs
ASoC: tegra: Revert 24 and 32 bit support
ASoC: SOF: Intel: add PCI ID for JasperLake
ALSA: hdsp: Make the firmware loading ioctl a bit more readable
ALSA: emu10k1: Fix annotation and cast for the recent uapi header change
ALSA: dummy: Fix PCM format loop in proc output
ALSA: usb-audio: Annotate endianess in Scarlett gen2 quirk
ALSA: usb-audio: Fix endianess in descriptor validation
ALSA: hda: Add JasperLake PCI ID and codec vid
ALSA: pcm: Fix sparse warnings wrt snd_pcm_state_t
ALSA: pcm: Fix memory leak at closing a stream without hw_free
ALSA: uapi: Fix sparse warning
ASoC: rt715: Add __maybe_unused to PM callbacks
ASoC: rt711: Add __maybe_unused to PM callbacks
ASoC: rt700: Add __maybe_unused to PM callbacks
...
Subsystem:
- the VL_READ and VL_CLR ioctls are now documented and their behavior is
unified across all the drivers.
- RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both REGMAP_I2C and
REGMAP_SPI unecessarily.
Drivers:
- at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and sama5d2
compatibles.
- cmos: solve lost interrupts issue on MS Surface 3
- hym8563: return proper errno when time is invalid
- rv3029: many fixes, nvram support
-----BEGIN PGP SIGNATURE-----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=e1Xr
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The VL_READ and VL_CLR ioctls have been reworked to be more useful.
This will not break userspace as there are very few users and they are
using the integer value as a boolean.
Apart from that, two drivers were reworked and a few fixes here and
there for a net reduction of number of lines.
Summary:
Subsystem:
- the VL_READ and VL_CLR ioctls are now documented and their behavior
is unified across all the drivers.
- RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
REGMAP_I2C and REGMAP_SPI unecessarily.
Drivers:
- at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
sama5d2 compatibles.
- cmos: solve lost interrupts issue on MS Surface 3
- hym8563: return proper errno when time is invalid
- rv3029: many fixes, nvram support"
* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
dt-bindings: rtc: at91rm9200: document clocks property
rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
rtc: Kconfig: select REGMAP_I2C when necessary
rtc: Kconfig: properly indent sd3078 entry
rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
rtc: cmos: Use predefined value for RTC IRQ on legacy x86
rtc: cmos: Stop using shared IRQ
rtc: tps6586x: Use IRQ_NOAUTOEN flag
rtc: at91rm9200: use FIELD_PREP/FIELD_GET
rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
rtc: at91rm9200: move register definitions to C file
rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
dt-bindings: rtc: at91rm9200: convert bindings to json-schema
rtc: at91rm9200: remove procfs information
dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
rtc: pcf8563: Use BIT
rtc: moxart: Convert to SPDX identifier
rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
rtc: rx8025: Remove struct i2c_client from struct rx8025_data
rtc: hym8563: Read the valid flag directly instead of caching it
...
CRNG hasn't initialized, instead of the old blocking pool. Also clean
up archrandom.h, and some other miscellaneous cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl40j1kACgkQ8vlZVpUN
gaPCywf8CWS9HFd2Iipj60gkTVugjlL5ib0lbfhQcAAwwzw1GLTXJSMBzzoMRHY/
ZI2sJZS1m0V1oWNnXXVKi+A1VXmlValWXAc+7fvbeaIe5pRT1EHP14s4Kz7/4d8Q
dk0b8cxNpR8u5CcbN8y9D+71IKpdksUbX7uGuGfw3bncQdRNwJVf+oS1fMGS0Rsb
F8ddQaED7iFpX2BMl56afQ4t2t0LA5+eLYMGoYoJx5fgd9BseP0TEcjj9Y4Z30M7
+GO4NZjUbAY0syx9r8hx3P/5miWZm2J9QJmJoXHhr5+IcAKM+6+Uo6X6gkOEqV4i
U//V1cqNuowV5ckE4Na+MfBillinsQ==
=HeFM
-----END PGP SIGNATURE-----
Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random changes from Ted Ts'o:
"Change /dev/random so that it uses the CRNG and only blocking if the
CRNG hasn't initialized, instead of the old blocking pool. Also clean
up archrandom.h, and some other miscellaneous cleanups"
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (24 commits)
s390x: Mark archrandom.h functions __must_check
powerpc: Mark archrandom.h functions __must_check
powerpc: Use bool in archrandom.h
x86: Mark archrandom.h functions __must_check
linux/random.h: Mark CONFIG_ARCH_RANDOM functions __must_check
linux/random.h: Use false with bool
linux/random.h: Remove arch_has_random, arch_has_random_seed
s390: Remove arch_has_random, arch_has_random_seed
powerpc: Remove arch_has_random, arch_has_random_seed
x86: Remove arch_has_random, arch_has_random_seed
random: remove some dead code of poolinfo
random: fix typo in add_timer_randomness()
random: Add and use pr_fmt()
random: convert to ENTROPY_BITS for better code readability
random: remove unnecessary unlikely()
random: remove kernel.random.read_wakeup_threshold
random: delete code to pull data into pools
random: remove the blocking pool
random: make /dev/random be almost like /dev/urandom
random: ignore GRND_RANDOM in getentropy(2)
...
-----BEGIN PGP SIGNATURE-----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=sGdY
-----END PGP SIGNATURE-----
Merge tag 'media/v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New staging driver for Rockship ISPv1 unit
- New staging driver for Rockchip MIPI Synopsys DPHY RX0
- y2038 fixes at V4L2 API (backward-compatible)
- A dvb core fix when receiving invalid EIT sections
- Some clang-specific warnings got fixed
- Added support for touch V4L2 interface at vivid
- Several drivers were converted to use the new
i2c_new_scanned_device() kAPI
- Added sm1 support at meson's vdec driver
- Several other driver cleanups, fixes and improvements
* tag 'media/v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (207 commits)
media: staging/intel-ipu3: remove TODO item about acronyms
media: v4l2-fwnode: Print the node name while parsing endpoints
media: Revert "media: staging/intel-ipu3: make imgu use fixed running mode"
media: mt9v111: constify copied structure
media: platform: VIDEO_MEDIATEK_JPEG can also depend on MTK_IOMMU
media: uvcvideo: Add a quirk to force GEO GC6500 Camera bits-per-pixel value
media: uvcvideo: Avoid cyclic entity chains due to malformed USB descriptors
media: hantro: fix post-processing NULL pointer dereference
media: rcar-vin: Use correct pixel format when aligning format
media: MAINTAINERS: add entry for Rockchip ISP1 driver
media: staging: rkisp1: add TODO file for staging
media: staging: rkisp1: add document for rkisp1 meta buffer format
media: staging: rkisp1: add output device for parameters
media: staging: rkisp1: add capture device for statistics
media: staging: rkisp1: add user space ABI definitions
media: staging: rkisp1: add streaming paths
media: staging: rkisp1: add Rockchip ISP1 base driver
media: staging: phy-rockchip-dphy-rx0: add Rockchip MIPI Synopsys DPHY RX0 driver
media: staging: dt-bindings: add Rockchip MIPI RX D-PHY RX0 yaml bindings
media: staging: dt-bindings: add Rockchip ISP1 yaml bindings
...
- Driver updates and cleanup for qedr, bnxt_re, hns, siw, mlx5, mlx4, rxe,
i40iw
- Larger series doing cleanup and rework for hns and hfi1.
- Some general reworking of the CM code to make it a little more
understandable
- Unify the different code paths connected to the uverbs FD scheme
- New UAPI ioctls conversions for get context and get async fd
- Trace points for CQ and CM portions of the RDMA stack
- mlx5 driver support for virtio-net formatted rings as RDMA raw ethernet QPs
- verbs support for setting the PCI-E relaxed ordering bit on DMA traffic
connected to a MR
- A couple of bug fixes that came too late to make rc7
-----BEGIN PGP SIGNATURE-----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=hepK
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A very quiet cycle with few notable changes. Mostly the usual list of
one or two patches to drivers changing something that isn't quite rc
worthy. The subsystem seems to be seeing a larger number of rework and
cleanup style patches right now, I feel that several vendors are
prepping their drivers for new silicon.
Summary:
- Driver updates and cleanup for qedr, bnxt_re, hns, siw, mlx5, mlx4,
rxe, i40iw
- Larger series doing cleanup and rework for hns and hfi1.
- Some general reworking of the CM code to make it a little more
understandable
- Unify the different code paths connected to the uverbs FD scheme
- New UAPI ioctls conversions for get context and get async fd
- Trace points for CQ and CM portions of the RDMA stack
- mlx5 driver support for virtio-net formatted rings as RDMA raw
ethernet QPs
- verbs support for setting the PCI-E relaxed ordering bit on DMA
traffic connected to a MR
- A couple of bug fixes that came too late to make rc7"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (108 commits)
RDMA/core: Make the entire API tree static
RDMA/efa: Mask access flags with the correct optional range
RDMA/cma: Fix unbalanced cm_id reference count during address resolve
RDMA/umem: Fix ib_umem_find_best_pgsz()
IB/mlx4: Fix leak in id_map_find_del
IB/opa_vnic: Spelling correction of 'erorr' to 'error'
IB/hfi1: Fix logical condition in msix_request_irq
RDMA/cm: Remove CM message structs
RDMA/cm: Use IBA functions for complex structure members
RDMA/cm: Use IBA functions for simple structure members
RDMA/cm: Use IBA functions for swapping get/set acessors
RDMA/cm: Use IBA functions for simple get/set acessors
RDMA/cm: Add SET/GET implementations to hide IBA wire format
RDMA/cm: Add accessors for CM_REQ transport_type
IB/mlx5: Return the administrative GUID if exists
RDMA/core: Ensure that rdma_user_mmap_entry_remove() is a fence
IB/mlx4: Fix memory leak in add_gid error flow
IB/mlx5: Expose RoCE accelerator counters
RDMA/mlx5: Set relaxed ordering when requested
RDMA/core: Add the core support field to METHOD_GET_CONTEXT
...
Pull updates from Andrew Morton:
"Most of -mm and quite a number of other subsystems: hotfixes, scripts,
ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov.
MM is fairly quiet this time. Holidays, I assume"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
kcov: ignore fault-inject and stacktrace
include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc()
execve: warn if process starts with executable stack
reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
init/main.c: fix misleading "This architecture does not have kernel memory protection" message
init/main.c: fix quoted value handling in unknown_bootoption
init/main.c: remove unnecessary repair_env_string in do_initcall_level
init/main.c: log arguments and environment passed to init
fs/binfmt_elf.c: coredump: allow process with empty address space to coredump
fs/binfmt_elf.c: coredump: delete duplicated overflow check
fs/binfmt_elf.c: coredump: allocate core ELF header on stack
fs/binfmt_elf.c: make BAD_ADDR() unlikely
fs/binfmt_elf.c: better codegen around current->mm
fs/binfmt_elf.c: don't copy ELF header around
fs/binfmt_elf.c: fix ->start_code calculation
fs/binfmt_elf.c: smaller code generation around auxv vector fill
lib/find_bit.c: uninline helper _find_next_bit()
lib/find_bit.c: join _find_next_bit{_le}
uapi: rename ext2_swab() to swab() and share globally in swab.h
lib/scatterlist.c: adjust indentation in __sg_alloc_table
...
ext2_swab() is defined locally in lib/find_bit.c However it is not
specific to ext2, neither to bitmaps.
There are many potential users of it, so rename it to just swab() and
move to include/uapi/linux/swab.h
ABI guarantees that size of unsigned long corresponds to BITS_PER_LONG,
therefore drop unneeded cast.
Link: http://lkml.kernel.org/r/20200103202846.21616-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As zone reclaim has been replaced by node reclaim, this patch fixes
related comments.
Link: http://lkml.kernel.org/r/20191126141346.GA22665@haolee.github.io
Signed-off-by: Hao Lee <haolee.swjtu@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The architecture states that we need to reset local IRQs for all CPU
resets. Because the old reset interface did not support the normal CPU
reset we never did that on a normal reset.
Let's implement an interface for the missing normal and clear resets
and reset all local IRQs, registers and control structures as stated
in the architecture.
Userspace might already reset the registers via the vcpu run struct,
but as we need the interface for the interrupt clearing part anyway,
we implement the resets fully and don't rely on userspace to reset the
rest.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20200131100205.74720-4-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJeMm6RAAoJEAx081l5xIa+vN8P/0j4jEOv+KIinAhoH+LG3EpD
m2TUuu5OQIoBrcCoWOgFBk3wqYpw6PdMBdkXh+5sE5lfeBynp8oC3Bin+QsHJE05
eGBpZtHe+70MQb0Eha+Aic0hchvBKzRnq6i0MYSIHn6afs76dLmF8knTjycxrvV5
Xu1Z3WDmjzqgWF9ja5JCD6fby11seP5RrwObYKVikO35QQyJJwGSGKgu5rq/pByK
/n0PCnCOINuL0Lz6J9qexdh/0/XYFQilRC31GJNlKbDSFuECF0GOEzEE/xUBW/pI
dLh2YwIIygm18Gar9PgvMwXJn3BfzQ0qEJsf+HlQeNw9iLgbHpp2AsTxHTE87OGe
R/y85taW3jGjPsNOKZOeLpvg/Ro8l8ZipLApvDCG2O22DThg/cd6NDjZxl1FJfRH
acDG/JdgPo5MbdRAH/cM1WuFS9gEM+0BeSQ5gCjtPakF+X4Vz+ABFDLMRJoaejkJ
q8DG32TQXELQx0RMghsqK7YCWGfl+2alA1u9w6TgJh9Rq4iVckvpDeqAZnK1Adkc
87g957Tl0n6FA4wJj/t5jrceiLRMJAm/rBK+R3GZNfWrgx4bHbCmb4fZDZsrFzph
nbAjNJ5kOchrFCaRR47ULby6+Q14MAFbkWq4Crfu4YDdzUkTPpep6pi2GIe8w0rV
P0hdYOYJf6LUda0utuQX
=oFrI
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Davbe Airlie:
"This is the main pull request for graphics for 5.6. Usual selection of
changes all over.
I've got one outstanding vmwgfx pull that touches mm so kept it
separate until after all of this lands. I'll try and get it to you
soon after this, but it might be early next week (nothing wrong with
code, just my schedule is messy)
This also hits a lot of fbdev drivers with some cleanups.
Other notables:
- vulkan timeline semaphore support added to syncobjs
- nouveau turing secureboot/graphics support
- Displayport MST display stream compression support
Detailed summary:
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes"
* tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits)
drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing
drm/nouveau/acr: return error when registering LSF if ACR not supported
drm/nouveau/disp/gv100-: not all channel types support reporting error codes
drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
drm/nouveau: support synchronous pushbuf submission
drm/nouveau: signal pending fences when channel has been killed
drm/nouveau: reject attempts to submit to dead channels
drm/nouveau: zero vma pointer even if we only unreference it rather than free
drm/nouveau: Add HD-audio component notifier support
drm/nouveau: fix build error without CONFIG_IOMMU_API
drm/nouveau/kms/nv04: remove set but not used variable 'width'
drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector'
drm/nouveau/mmu: fix comptag memory leak
drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc
drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping
drm/exynos: Rename Exynos to lowercase
drm/exynos: change callback names
drm/mst: Don't do atomic checks over disabled managers
drm/amdgpu: add the lost mutex_init back
drm/amd/display: skip opp blank or unblank if test pattern enabled
...
A couple of OOPS fixes, fixes for TU1xx if firmware isn't available,
better behaviour in the face of GPU faults, and a patch to make HD
audio work again after runpm changes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv4xcLF6Ahh7UYEesn-wBEksd2da+ghusBAdODMrH7Sz2A@mail.gmail.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXjFo8wAKCRCRxhvAZXjc
omaGAQDVwCHQekqxp2eC8EJH4Pkt+Bn1BLrA25stlTo93YBPHgEAsPVUCRNcrZAl
VncYmxCfpt3Yu0S/MTVXu5xrRiIXPQk=
=uqTN
-----END PGP SIGNATURE-----
Merge tag 'threads-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread management updates from Christian Brauner:
"Sargun Dhillon over the last cycle has worked on the pidfd_getfd()
syscall.
This syscall allows for the retrieval of file descriptors of a process
based on its pidfd. A task needs to have ptrace_may_access()
permissions with PTRACE_MODE_ATTACH_REALCREDS (suggested by Oleg and
Andy) on the target.
One of the main use-cases is in combination with seccomp's user
notification feature. As a reminder, seccomp's user notification
feature was made available in v5.0. It allows a task to retrieve a
file descriptor for its seccomp filter. The file descriptor is usually
handed of to a more privileged supervising process. The supervisor can
then listen for syscall events caught by the seccomp filter of the
supervisee and perform actions in lieu of the supervisee, usually
emulating syscalls. pidfd_getfd() is needed to expand its uses.
There are currently two major users that wait on pidfd_getfd() and one
future user:
- Netflix, Sargun said, is working on a service mesh where users
should be able to connect to a dns-based VIP. When a user connects
to e.g. 1.2.3.4:80 that runs e.g. service "foo" they will be
redirected to an envoy process. This service mesh uses seccomp user
notifications and pidfd to intercept all connect calls and instead
of connecting them to 1.2.3.4:80 connects them to e.g.
127.0.0.1:8080.
- LXD uses the seccomp notifier heavily to intercept and emulate
mknod() and mount() syscalls for unprivileged containers/processes.
With pidfd_getfd() more uses-cases e.g. bridging socket connections
will be possible.
- The patchset has also seen some interest from the browser corner.
Right now, Firefox is using a SECCOMP_RET_TRAP sandbox managed by a
broker process. In the future glibc will start blocking all signals
during dlopen() rendering this type of sandbox impossible. Hence,
in the future Firefox will switch to a seccomp-user-nofication
based sandbox which also makes use of file descriptor retrieval.
The thread for this can be found at
https://sourceware.org/ml/libc-alpha/2019-12/msg00079.html
With pidfd_getfd() it is e.g. possible to bridge socket connections
for the supervisee (binding to a privileged port) and taking actions
on file descriptors on behalf of the supervisee in general.
Sargun's first version was using an ioctl on pidfds but various people
pushed for it to be a proper syscall which he duely implemented as
well over various review cycles. Selftests are of course included.
I've also added instructions how to deal with merge conflicts below.
There's also a small fix coming from the kernel mentee project to
correctly annotate struct sighand_struct with __rcu to fix various
sparse warnings. We've received a few more such fixes and even though
they are mostly trivial I've decided to postpone them until after -rc1
since they came in rather late and I don't want to risk introducing
build warnings.
Finally, there's a new prctl() command PR_{G,S}ET_IO_FLUSHER which is
needed to avoid allocation recursions triggerable by storage drivers
that have userspace parts that run in the IO path (e.g. dm-multipath,
iscsi, etc). These allocation recursions deadlock the device.
The new prctl() allows such privileged userspace components to avoid
allocation recursions by setting the PF_MEMALLOC_NOIO and
PF_LESS_THROTTLE flags. The patch carries the necessary acks from the
relevant maintainers and is routed here as part of prctl()
thread-management."
* tag 'threads-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
prctl: PR_{G,S}ET_IO_FLUSHER to support controlling memory reclaim
sched.h: Annotate sighand_struct with __rcu
test: Add test for pidfd getfd
arch: wire up pidfd_getfd syscall
pid: Implement pidfd_getfd syscall
vfs, fdtable: Add fget_task helper
-----BEGIN PGP SIGNATURE-----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=ZZUI
-----END PGP SIGNATURE-----
Merge tag 'for-5.6/io_uring-vfs-2020-01-29' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- Support for various new opcodes (fallocate, openat, close, statx,
fadvise, madvise, openat2, non-vectored read/write, send/recv, and
epoll_ctl)
- Faster ring quiesce for fileset updates
- Optimizations for overflow condition checking
- Support for max-sized clamping
- Support for probing what opcodes are supported
- Support for io-wq backend sharing between "sibling" rings
- Support for registering personalities
- Lots of little fixes and improvements
* tag 'for-5.6/io_uring-vfs-2020-01-29' of git://git.kernel.dk/linux-block: (64 commits)
io_uring: add support for epoll_ctl(2)
eventpoll: support non-blocking do_epoll_ctl() calls
eventpoll: abstract out epoll_ctl() handler
io_uring: fix linked command file table usage
io_uring: support using a registered personality for commands
io_uring: allow registering credentials
io_uring: add io-wq workqueue sharing
io-wq: allow grabbing existing io-wq
io_uring/io-wq: don't use static creds/mm assignments
io-wq: make the io_wq ref counted
io_uring: fix refcounting with batched allocations at OOM
io_uring: add comment for drain_next
io_uring: don't attempt to copy iovec for READ/WRITE
io_uring: honor IOSQE_ASYNC for linked reqs
io_uring: prep req when do IOSQE_ASYNC
io_uring: use labeled array init in io_op_defs
io_uring: optimise sqe-to-req flags translation
io_uring: remove REQ_F_IO_DRAINED
io_uring: file switch work needs to get flushed on exit
io_uring: hide uring_fd in ctx
...
This series is slightly unusual because it includes Arnd's compat
ioctl tree here:
1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
Excluding Arnd's changes, this is mostly an update of the usual
drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas. There
are a couple of core and base updates around error propagation and
atomicity in the attribute container base we use for the SCSI
transport classes. The rest is minor changes and updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXjHQJyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZZ8AQC02N+v
iUnTl1YxGPjIWBbnHuUxN2Qbb9D3C6gAT1LkigEArlk163K3A1XEQHF/VNCdAz/f
01XYTd3p1VHuegIBHlk=
=Cn52
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series is slightly unusual because it includes Arnd's compat
ioctl tree here:
1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
Excluding Arnd's changes, this is mostly an update of the usual
drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas.
There are a couple of core and base updates around error propagation
and atomicity in the attribute container base we use for the SCSI
transport classes.
The rest is minor changes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits)
scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask
scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity
scsi: hisi_sas: Modify the file permissions of trigger_dump to write only
scsi: hisi_sas: Replace magic number when handle channel interrupt
scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock
scsi: hisi_sas: use threaded irq to process CQ interrupts
scsi: ufs: Use UFS device indicated maximum LU number
scsi: ufs: Add max_lu_supported in struct ufs_dev_info
scsi: ufs: Delete is_init_prefetch from struct ufs_hba
scsi: ufs: Inline two functions into their callers
scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()
scsi: ufs: Split ufshcd_probe_hba() based on its called flow
scsi: ufs: Delete struct ufs_dev_desc
scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
scsi: ufs-mediatek: enable low-power mode for hibern8 state
scsi: ufs: export some functions for vendor usage
scsi: ufs-mediatek: add dbg_register_dump implementation
scsi: qla2xxx: Fix a NULL pointer dereference in an error path
scsi: qla1280: Make checking for 64bit support consistent
scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1
...
These are updates to device drivers and file systems that for some reason
or another were not included in the kernel in the previous y2038 series.
I've gone through all users of time_t again to make sure the kernel is
in a long-term maintainable state, replacing all remaining references
to time_t with safe alternatives.
Some related parts of the series were picked up into the nfsd, xfs,
alsa and v4l2 trees. A final set of patches in linux-mm removes the now
unused time_t/timeval/timespec types and helper functions after all five
branches are merged for linux-5.6, ensuring that no new users get merged.
As a result, linux-5.6, or my backport of the patches to 5.4 [1], should
be the first release that can serve as a base for a 32-bit system designed
to run beyond year 2038, with a few remaining caveats:
- All user space must be compiled with a 64-bit time_t, which will be
supported in the coming musl-1.2 and glibc-2.32 releases, along with
installed kernel headers from linux-5.6 or higher.
- Applications that use the system call interfaces directly need to be
ported to use the time64 syscalls added in linux-5.1 in place of the
existing system calls. This impacts most users of futex() and seccomp()
as well as programming languages that have their own runtime environment
not based on libc.
- Applications that use a private copy of kernel uapi header files or
their contents may need to update to the linux-5.6 version, in
particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h,
linux/elfcore.h, linux/sockios.h, linux/timex.h and linux/can/bcm.h.
- A few remaining interfaces cannot be changed to pass a 64-bit time_t
in a compatible way, so they must be configured to use CLOCK_MONOTONIC
times or (with a y2106 problem) unsigned 32-bit timestamps. Most
importantly this impacts all users of 'struct input_event'.
- All y2038 problems that are present on 64-bit machines also apply to
32-bit machines. In particular this affects file systems with on-disk
timestamps using signed 32-bit seconds: ext4 with ext3-style small
inodes, ext2, xfs (to be fixed soon) and ufs.
Changes since v1 [2]:
- Add Acks I received
- Rebase to v5.5-rc1, dropping patches that got merged already
- Add NFS, XFS and the final three patches from another series
- Rewrite etnaviv patches
- Add one late revert to avoid an etnaviv regression
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame
[2] https://lore.kernel.org/lkml/20191108213257.3097633-1-arnd@arndb.de/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJeMYy3AAoJEGCrR//JCVInEGwP/0R+S+ok7vw9OdLVT0lFl07D
IcVabgOWf24imN7m7L7Mlt3nDfxIT4tMpiAXq7eMO3spcyViG18O2LXdSQ4/7QBp
+BlhoMjOP9w34Jyd7mnkFr4vqQALvfIqkS8rFObDtDub2Rfj9PC36MRMIu8BPXlv
RK8bigwJeH/DV38yc5/JeUcD+WuewYLsK9XPWN+4yB4vgGsNU3ZQQ6nnzbR3hMsN
DN8WZ68Y7IBs0Kyxkf+s2zmRXtCa2RiFg/2TUsk5olVAJVaenvte69hq5RSbg1vW
vLi6K8cBoPWL59nqCzcNE+TUhSUg3LOj/a/KWyl76yovz7AlJaNjssOf8ZjHw6sL
MhQqz3hXTxiJDS2Jvbf1yojiYGlzrq/gqcRFGe9jPcZdieMc4/yZCx60G/Exa5Pu
YdMcqMyDWPFyUAFQNWEF59HPheOdj6tb1KpJ6bwgCo3P7QqhLrU4z9w3Py4/ZfBO
4sWcWteSsD6MN/ADJ2WQ56nNxzM2AvkeVJKcF6FCkdngXX9T0GExmZz7SqB5Du99
9lNjIiD5E+LBa/Swo/7n49aYa8x06V1pmHYTZVh9Wkl+CZiO21umezQFrWsfaMTp
xt3c6pFdMG5xNMGpreTAXOmf2R+T6O8IO2qQq/TYjzqOLH7QC830P7avkmml+cK1
LjOBE2TfSeO8Ru1dXV4t
=wx0A
-----END PGP SIGNATURE-----
Merge tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull y2038 updates from Arnd Bergmann:
"Core, driver and file system changes
These are updates to device drivers and file systems that for some
reason or another were not included in the kernel in the previous
y2038 series.
I've gone through all users of time_t again to make sure the kernel is
in a long-term maintainable state, replacing all remaining references
to time_t with safe alternatives.
Some related parts of the series were picked up into the nfsd, xfs,
alsa and v4l2 trees. A final set of patches in linux-mm removes the
now unused time_t/timeval/timespec types and helper functions after
all five branches are merged for linux-5.6, ensuring that no new users
get merged.
As a result, linux-5.6, or my backport of the patches to 5.4 [1],
should be the first release that can serve as a base for a 32-bit
system designed to run beyond year 2038, with a few remaining caveats:
- All user space must be compiled with a 64-bit time_t, which will be
supported in the coming musl-1.2 and glibc-2.32 releases, along
with installed kernel headers from linux-5.6 or higher.
- Applications that use the system call interfaces directly need to
be ported to use the time64 syscalls added in linux-5.1 in place of
the existing system calls. This impacts most users of futex() and
seccomp() as well as programming languages that have their own
runtime environment not based on libc.
- Applications that use a private copy of kernel uapi header files or
their contents may need to update to the linux-5.6 version, in
particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h,
linux/elfcore.h, linux/sockios.h, linux/timex.h and
linux/can/bcm.h.
- A few remaining interfaces cannot be changed to pass a 64-bit
time_t in a compatible way, so they must be configured to use
CLOCK_MONOTONIC times or (with a y2106 problem) unsigned 32-bit
timestamps. Most importantly this impacts all users of 'struct
input_event'.
- All y2038 problems that are present on 64-bit machines also apply
to 32-bit machines. In particular this affects file systems with
on-disk timestamps using signed 32-bit seconds: ext4 with
ext3-style small inodes, ext2, xfs (to be fixed soon) and ufs"
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame
* tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (21 commits)
Revert "drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC"
y2038: sh: remove timeval/timespec usage from headers
y2038: sparc: remove use of struct timex
y2038: rename itimerval to __kernel_old_itimerval
y2038: remove obsolete jiffies conversion functions
nfs: fscache: use timespec64 in inode auxdata
nfs: fix timstamp debug prints
nfs: use time64_t internally
sunrpc: convert to time64_t for expiry
drm/etnaviv: avoid deprecated timespec
drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC
drm/msm: avoid using 'timespec'
hfs/hfsplus: use 64-bit inode timestamps
hostfs: pass 64-bit timestamps to/from user space
packet: clarify timestamp overflow
tsacct: add 64-bit btime field
acct: stop using get_seconds()
um: ubd: use 64-bit time_t where possible
xtensa: ISS: avoid struct timeval
dlm: use SO_SNDTIMEO_NEW instead of SO_SNDTIMEO_OLD
...
Fix the following sparse warning generated due to
64-bit compat type having fields defined explicitly
with __s32:
sound/soc/sof/sof-audio.c:46:31: warning: incorrect type in assignment (different base types)
sound/soc/sof/sof-audio.c:46:31: expected restricted snd_pcm_state_t [usertype] state
sound/soc/sof/sof-audio.c:46:31: got signed int [usertype] state
Fixes: 80fe7430c7 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200129184448.3005-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull openat2 support from Al Viro:
"This is the openat2() series from Aleksa Sarai.
I'm afraid that the rest of namei stuff will have to wait - it got
zero review the last time I'd posted #work.namei, and there had been a
leak in the posted series I'd caught only last weekend. I was going to
repost it on Monday, but the window opened and the odds of getting any
review during that... Oh, well.
Anyway, openat2 part should be ready; that _did_ get sane amount of
review and public testing, so here it comes"
From Aleksa's description of the series:
"For a very long time, extending openat(2) with new features has been
incredibly frustrating. This stems from the fact that openat(2) is
possibly the most famous counter-example to the mantra "don't silently
accept garbage from userspace" -- it doesn't check whether unknown
flags are present[1].
This means that (generally) the addition of new flags to openat(2) has
been fraught with backwards-compatibility issues (O_TMPFILE has to be
defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old
kernels gave errors, since it's insecure to silently ignore the
flag[2]). All new security-related flags therefore have a tough road
to being added to openat(2).
Furthermore, the need for some sort of control over VFS's path
resolution (to avoid malicious paths resulting in inadvertent
breakouts) has been a very long-standing desire of many userspace
applications.
This patchset is a revival of Al Viro's old AT_NO_JUMPS[3] patchset
(which was a variant of David Drysdale's O_BENEATH patchset[4] which
was a spin-off of the Capsicum project[5]) with a few additions and
changes made based on the previous discussion within [6] as well as
others I felt were useful.
In line with the conclusions of the original discussion of
AT_NO_JUMPS, the flag has been split up into separate flags. However,
instead of being an openat(2) flag it is provided through a new
syscall openat2(2) which provides several other improvements to the
openat(2) interface (see the patch description for more details). The
following new LOOKUP_* flags are added:
LOOKUP_NO_XDEV:
Blocks all mountpoint crossings (upwards, downwards, or through
absolute links). Absolute pathnames alone in openat(2) do not
trigger this. Magic-link traversal which implies a vfsmount jump is
also blocked (though magic-link jumps on the same vfsmount are
permitted).
LOOKUP_NO_MAGICLINKS:
Blocks resolution through /proc/$pid/fd-style links. This is done
by blocking the usage of nd_jump_link() during resolution in a
filesystem. The term "magic-links" is used to match with the only
reference to these links in Documentation/, but I'm happy to change
the name.
It should be noted that this is different to the scope of
~LOOKUP_FOLLOW in that it applies to all path components. However,
you can do openat2(NO_FOLLOW|NO_MAGICLINKS) on a magic-link and it
will *not* fail (assuming that no parent component was a
magic-link), and you will have an fd for the magic-link.
In order to correctly detect magic-links, the introduction of a new
LOOKUP_MAGICLINK_JUMPED state flag was required.
LOOKUP_BENEATH:
Disallows escapes to outside the starting dirfd's
tree, using techniques such as ".." or absolute links. Absolute
paths in openat(2) are also disallowed.
Conceptually this flag is to ensure you "stay below" a certain
point in the filesystem tree -- but this requires some additional
to protect against various races that would allow escape using
"..".
Currently LOOKUP_BENEATH implies LOOKUP_NO_MAGICLINKS, because it
can trivially beam you around the filesystem (breaking the
protection). In future, there might be similar safety checks done
as in LOOKUP_IN_ROOT, but that requires more discussion.
In addition, two new flags are added that expand on the above ideas:
LOOKUP_NO_SYMLINKS:
Does what it says on the tin. No symlink resolution is allowed at
all, including magic-links. Just as with LOOKUP_NO_MAGICLINKS this
can still be used with NOFOLLOW to open an fd for the symlink as
long as no parent path had a symlink component.
LOOKUP_IN_ROOT:
This is an extension of LOOKUP_BENEATH that, rather than blocking
attempts to move past the root, forces all such movements to be
scoped to the starting point. This provides chroot(2)-like
protection but without the cost of a chroot(2) for each filesystem
operation, as well as being safe against race attacks that
chroot(2) is not.
If a race is detected (as with LOOKUP_BENEATH) then an error is
generated, and similar to LOOKUP_BENEATH it is not permitted to
cross magic-links with LOOKUP_IN_ROOT.
The primary need for this is from container runtimes, which
currently need to do symlink scoping in userspace[7] when opening
paths in a potentially malicious container.
There is a long list of CVEs that could have bene mitigated by
having RESOLVE_THIS_ROOT (such as CVE-2017-1002101,
CVE-2017-1002102, CVE-2018-15664, and CVE-2019-5736, just to name a
few).
In order to make all of the above more usable, I'm working on
libpathrs[8] which is a C-friendly library for safe path resolution.
It features a userspace-emulated backend if the kernel doesn't support
openat2(2). Hopefully we can get userspace to switch to using it, and
thus get openat2(2) support for free once it's ready.
Future work would include implementing things like
RESOLVE_NO_AUTOMOUNT and possibly a RESOLVE_NO_REMOTE (to allow
programs to be sure they don't hit DoSes though stale NFS handles)"
* 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Documentation: path-lookup: include new LOOKUP flags
selftests: add openat2(2) selftests
open: introduce openat2(2) syscall
namei: LOOKUP_{IN_ROOT,BENEATH}: permit limited ".." resolution
namei: LOOKUP_IN_ROOT: chroot-like scoped resolution
namei: LOOKUP_BENEATH: O_BENEATH-like scoped resolution
namei: LOOKUP_NO_XDEV: block mountpoint crossing
namei: LOOKUP_NO_MAGICLINKS: block magic-link resolution
namei: LOOKUP_NO_SYMLINKS: block symlink resolution
namei: allow set_root() to produce errors
namei: allow nd_jump_link() to produce errors
nsfs: clean-up ns_get_path() signature to return int
namei: only return -ECHILD from follow_dotdot_rcu()
Here is the big char/misc/whatever driver changes for 5.6-rc1
Included in here are loads of things from a variety of different driver
subsystems:
- soundwire updates
- binder updates
- nvmem updates
- firmware drivers updates
- extcon driver updates
- various misc driver updates
- fpga driver updates
- interconnect subsystem and driver updates
- bus driver updates
- uio driver updates
- mei driver updates
- w1 driver cleanups
- various other small driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFKeQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynjVACgg6JWfOyPCnz3GfRD1vQZyUl+Hg0An1H+Eh08
+LQk5Qpb3vVwBpCp6qR3
=MB+D
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc/whatever driver changes for 5.6-rc1
Included in here are loads of things from a variety of different
driver subsystems:
- soundwire updates
- binder updates
- nvmem updates
- firmware drivers updates
- extcon driver updates
- various misc driver updates
- fpga driver updates
- interconnect subsystem and driver updates
- bus driver updates
- uio driver updates
- mei driver updates
- w1 driver cleanups
- various other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits)
mei: me: add jasper point DID
char: hpet: Use flexible-array member
binder: fix log spam for existing debugfs file creation.
mei: me: add comet point (lake) H device ids
nvmem: add QTI SDAM driver
dt-bindings: nvmem: add binding for QTI SPMI SDAM
dt-bindings: imx-ocotp: Add i.MX8MP compatible
dt-bindings: soundwire: fix example
soundwire: cadence: fix kernel-doc parameter descriptions
soundwire: intel: report slave_ids for each link to SOF driver
siox: Use the correct style for SPDX License Identifier
w1: omap-hdq: Simplify driver with PM runtime autosuspend
firmware: stratix10-svc: Remove unneeded semicolon
firmware: google: Probe for a GSMI handler in firmware
firmware: google: Unregister driver_info on failure and exit in gsmi
firmware: google: Release devices before unregistering the bus
slimbus: qcom: add missed clk_disable_unprepare in remove
slimbus: Use the correct style for SPDX License Identifier
slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel()
dt-bindings: SLIMBus: add slim devices optional properties
...
Here is the big staging/iio driver patches for 5.6-rc1
Included in here are:
- lots of new IIO drivers and updates for that subsystem
- the usual huge quantity of minor cleanups for staging drivers
- removal of the following staging drivers:
- isdn/avm
- isdn/gigaset
- isdn/hysdn
- octeon-usb
- octeon ethernet
Overall we deleted far more lines than we added, removing over 40k of
old and obsolete driver code.
All of these changes have been in linux-next for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFOKw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yly3wCfac6fbfrpwZ2VeUFyT5EJFr9JnKEAn1VMQTIJ
QCgCqbQemnXfbOXiA5pZ
=rP6a
-----END PGP SIGNATURE-----
Merge tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here is the big staging/iio driver patches for 5.6-rc1
Included in here are:
- lots of new IIO drivers and updates for that subsystem
- the usual huge quantity of minor cleanups for staging drivers
- removal of the following staging drivers:
- isdn/avm
- isdn/gigaset
- isdn/hysdn
- octeon-usb
- octeon ethernet
Overall we deleted far more lines than we added, removing over 40k of
old and obsolete driver code.
All of these changes have been in linux-next for a while with no
reported issues"
* tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (353 commits)
staging: most: usb: check for NULL device
staging: next: configfs: fix release link
staging: most: core: fix logging messages
staging: most: core: remove container struct
staging: most: remove struct device core driver
staging: most: core: drop device reference
staging: most: remove device from interface structure
staging: comedi: drivers: fix spelling mistake "to" -> "too"
staging: exfat: remove fs_func struct.
staging: wilc1000: avoid mutex unlock without lock in wilc_wlan_handle_txq()
staging: wilc1000: return zero on success and non-zero on function failure
staging: axis-fifo: replace spinlock with mutex
staging: wilc1000: remove unused code prior to throughput enhancement in SPI
staging: wilc1000: added 'wilc_' prefix for 'struct assoc_resp' name
staging: wilc1000: move firmware API struct's to separate header file
staging: wilc1000: remove use of infinite loop conditions
staging: kpc2000: rename variables with kpc namespace
staging: vt6656: Remove memory buffer from vnt_download_firmware.
staging: vt6656: Just check NEWRSR_DECRYPTOK for RX_FLAG_DECRYPTED.
staging: vt6656: Use vnt_rx_tail struct for tail variables.
...
For personalities previously registered via IORING_REGISTER_PERSONALITY,
allow any command to select them. This is done through setting
sqe->personality to the id returned from registration, and then flagging
sqe->flags with IOSQE_PERSONALITY.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an application wants to use a ring with different kinds of
credentials, it can register them upfront. We don't lookup credentials,
the credentials of the task calling IORING_REGISTER_PERSONALITY is used.
An 'id' is returned for the application to use in subsequent personality
support.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IORING_SETUP_ATTACH_WQ is set, it expects wq_fd in io_uring_params to
be a valid io_uring fd io-wq of which will be shared with the newly
created io_uring instance. If the flag is set but it can't share io-wq,
it fails.
This allows creation of "sibling" io_urings, where we prefer to keep the
SQ/CQ private, but want to share the async backend to minimize the amount
of overhead associated with having multiple rings that belong to the same
backend.
Reported-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Daurnimator <quae@daurnimator.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently setup the io_wq with a static set of mm and creds. Even for
a single-use io-wq per io_uring, this is suboptimal as we have may have
multiple enters of the ring. For sharing the io-wq backend, it doesn't
work at all.
Switch to passing in the creds and mm when the work item is setup. This
means that async work is no longer deferred to the io_uring mm and creds,
it is done with the current mm and creds.
Flag this behavior with IORING_FEAT_CUR_PERSONALITY, so applications know
they can rely on the current personality (mm and creds) being the same
for direct issue and async issue.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As diffstat shows we've had again a lot of works done for this cycle:
majority of changes are the continued componentization and code
refactoring in ASoC, the tree-wide PCM API updates and cleanups
and SOF updates while a few ASoC driver updates are seen, too.
Here we go, some highlights:
Core:
- Finally y2038 support landed to ALSA ABI;
some ioctls have been extended and lots of tricks were applied
- Applying the new managed PCM buffer API to all drivers;
the API itself was already merged in 5.5
- The already deprecated dimension support in ALSA control API is
dropped completely now
- Verification of ALSA control elements to catch API misuses
ASoC:
- Further code refactorings and moving things to the component level
- Lots of updates and improvements on SOF / Intel drivers;
now including common HDMI driver and SoundWire support
- New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm
WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011, RT1015
and RT1308
HD-audio:
- Improved ring-buffer communications using waitqueue
- Drop the superfluous buffer preallocation on x86
Others:
- Many code cleanups, mostly constifications over the whole tree
- USB-audio: quirks for MOTU, Corsair Virtuoso, Line6 Helix
- FireWire: code refactoring for oxfw and dice drivers
-----BEGIN PGP SIGNATURE-----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=PGgQ
-----END PGP SIGNATURE-----
Merge tag 'sound-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As the diffstat shows we've had again a lot of works done for this
cycle: the majority of changes are the continued componentization and
code refactoring in ASoC, the tree-wide PCM API updates and cleanups
and SOF updates while a few ASoC driver updates are seen, too.
Here we go, some highlights:
Core:
- Finally y2038 support landed to ALSA ABI; some ioctls have been
extended and lots of tricks were applied
- Applying the new managed PCM buffer API to all drivers; the API
itself was already merged in 5.5
- The already deprecated dimension support in ALSA control API is
dropped completely now
- Verification of ALSA control elements to catch API misuses
ASoC:
- Further code refactorings and moving things to the component level
- Lots of updates and improvements on SOF / Intel drivers; now
including common HDMI driver and SoundWire support
- New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm
WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011,
RT1015 and RT1308
HD-audio:
- Improved ring-buffer communications using waitqueue
- Drop the superfluous buffer preallocation on x86
Others:
- Many code cleanups, mostly constifications over the whole tree
- USB-audio: quirks for MOTU, Corsair Virtuoso, Line6 Helix
- FireWire: code refactoring for oxfw and dice drivers"
* tag 'sound-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (638 commits)
ALSA: usb-audio: add quirks for Line6 Helix devices fw>=2.82
ALSA: hda: Add Clevo W65_67SB the power_save blacklist
ASoC: soc-core: remove null_snd_soc_ops
ASoC: soc-pcm: add soc_rtd_trigger()
ASoC: soc-pcm: add soc_rtd_hw_free()
ASoC: soc-pcm: add soc_rtd_hw_params()
ASoC: soc-pcm: add soc_rtd_prepare()
ASoC: soc-pcm: add soc_rtd_shutdown()
ASoC: soc-pcm: add soc_rtd_startup()
ASoC: rt1015: add rt1015 amplifier driver
ASoC: madera: Correct some kernel doc
ASoC: topology: fix soc_tplg_fe_link_create() - link->dobj initialization order
ASoC: Intel: skl_hda_dsp_common: Fix global-out-of-bounds bug
ASoC: madera: Correct DMIC only input hook ups
ALSA: cs46xx: fix spelling mistake "to" -> "too"
ALSA: hda - Add docking station support for Lenovo Thinkpad T420s
ASoC: Add MediaTek MT6660 Speaker Amp Driver
ASoC: dt-bindings: rt5645: add suppliers
ASoC: max98090: fix deadlock in max98090_dapm_put_enum_double()
ASoC: dapm: add snd_soc_dapm_put_enum_double_locked
...
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
Pull crypto updates from Herbert Xu:
"API:
- Removed CRYPTO_TFM_RES flags
- Extended spawn grabbing to all algorithm types
- Moved hash descsize verification into API code
Algorithms:
- Fixed recursive pcrypt dead-lock
- Added new 32 and 64-bit generic versions of poly1305
- Added cryptogams implementation of x86/poly1305
Drivers:
- Added support for i.MX8M Mini in caam
- Added support for i.MX8M Nano in caam
- Added support for i.MX8M Plus in caam
- Added support for A33 variant of SS in sun4i-ss
- Added TEE support for Raven Ridge in ccp
- Added in-kernel API to submit TEE commands in ccp
- Added AMD-TEE driver
- Added support for BCM2711 in iproc-rng200
- Added support for AES256-GCM based ciphers for chtls
- Added aead support on SEC2 in hisilicon"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (244 commits)
crypto: arm/chacha - fix build failured when kernel mode NEON is disabled
crypto: caam - add support for i.MX8M Plus
crypto: x86/poly1305 - emit does base conversion itself
crypto: hisilicon - fix spelling mistake "disgest" -> "digest"
crypto: chacha20poly1305 - add back missing test vectors and test chunking
crypto: x86/poly1305 - fix .gitignore typo
tee: fix memory allocation failure checks on drv_data and amdtee
crypto: ccree - erase unneeded inline funcs
crypto: ccree - make cc_pm_put_suspend() void
crypto: ccree - split overloaded usage of irq field
crypto: ccree - fix PM race condition
crypto: ccree - fix FDE descriptor sequence
crypto: ccree - cc_do_send_request() is void func
crypto: ccree - fix pm wrongful error reporting
crypto: ccree - turn errors to debug msgs
crypto: ccree - fix AEAD decrypt auth fail
crypto: ccree - fix typo in comment
crypto: ccree - fix typos in error msgs
crypto: atmel-{aes,sha,tdes} - Retire crypto_platform_data
crypto: x86/sha - Eliminate casts on asm implementations
...
- Extend the FS_IOC_ADD_ENCRYPTION_KEY ioctl to allow the raw key to be
provided via a keyring key.
- Prepare for the new dirhash method (SipHash of plaintext name) that
will be used by directories that are both encrypted and casefolded.
- Switch to a new format for "no-key names" that prepares for the new
dirhash method, and also fixes a longstanding bug where multiple
filenames could map to the same no-key name.
- Allow the crypto algorithms used by fscrypt to be built as loadable
modules when the fscrypt-capable filesystems are.
- Optimize fscrypt_zeroout_range().
- Various cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXi+OfxQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK0tJAQDkxUl11NRqVgS06TLWAniKVMWh3kaL
CaonjEmfs1m6kgEA+TP8coTAxUvJNubaHz3J3x9dyx9RPUVFyUzSB0J/TQg=
=XkXJ
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
- Extend the FS_IOC_ADD_ENCRYPTION_KEY ioctl to allow the raw key to be
provided via a keyring key.
- Prepare for the new dirhash method (SipHash of plaintext name) that
will be used by directories that are both encrypted and casefolded.
- Switch to a new format for "no-key names" that prepares for the new
dirhash method, and also fixes a longstanding bug where multiple
filenames could map to the same no-key name.
- Allow the crypto algorithms used by fscrypt to be built as loadable
modules when the fscrypt-capable filesystems are.
- Optimize fscrypt_zeroout_range().
- Various cleanups.
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: (26 commits)
fscrypt: improve format of no-key names
ubifs: allow both hash and disk name to be provided in no-key names
ubifs: don't trigger assertion on invalid no-key filename
fscrypt: clarify what is meant by a per-file key
fscrypt: derive dirhash key for casefolded directories
fscrypt: don't allow v1 policies with casefolding
fscrypt: add "fscrypt_" prefix to fname_encrypt()
fscrypt: don't print name of busy file when removing key
ubifs: use IS_ENCRYPTED() instead of ubifs_crypt_is_encrypted()
fscrypt: document gfp_flags for bounce page allocation
fscrypt: optimize fscrypt_zeroout_range()
fscrypt: remove redundant bi_status check
fscrypt: Allow modular crypto algorithms
fscrypt: include <linux/ioctl.h> in UAPI header
fscrypt: don't check for ENOKEY from fscrypt_get_encryption_info()
fscrypt: remove fscrypt_is_direct_key_policy()
fscrypt: move fscrypt_valid_enc_modes() to policy.c
fscrypt: check for appropriate use of DIRECT_KEY flag earlier
fscrypt: split up fscrypt_supported_policy() by policy version
fscrypt: introduce fscrypt_needs_contents_encryption()
...
There are several storage drivers like dm-multipath, iscsi, tcmu-runner,
amd nbd that have userspace components that can run in the IO path. For
example, iscsi and nbd's userspace deamons may need to recreate a socket
and/or send IO on it, and dm-multipath's daemon multipathd may need to
send SG IO or read/write IO to figure out the state of paths and re-set
them up.
In the kernel these drivers have access to GFP_NOIO/GFP_NOFS and the
memalloc_*_save/restore functions to control the allocation behavior,
but for userspace we would end up hitting an allocation that ended up
writing data back to the same device we are trying to allocate for.
The device is then in a state of deadlock, because to execute IO the
device needs to allocate memory, but to allocate memory the memory
layers want execute IO to the device.
Here is an example with nbd using a local userspace daemon that performs
network IO to a remote server. We are using XFS on top of the nbd device,
but it can happen with any FS or other modules layered on top of the nbd
device that can write out data to free memory. Here a nbd daemon helper
thread, msgr-worker-1, is performing a write/sendmsg on a socket to execute
a request. This kicks off a reclaim operation which results in a WRITE to
the nbd device and the nbd thread calling back into the mm layer.
[ 1626.609191] msgr-worker-1 D 0 1026 1 0x00004000
[ 1626.609193] Call Trace:
[ 1626.609195] ? __schedule+0x29b/0x630
[ 1626.609197] ? wait_for_completion+0xe0/0x170
[ 1626.609198] schedule+0x30/0xb0
[ 1626.609200] schedule_timeout+0x1f6/0x2f0
[ 1626.609202] ? blk_finish_plug+0x21/0x2e
[ 1626.609204] ? _xfs_buf_ioapply+0x2e6/0x410
[ 1626.609206] ? wait_for_completion+0xe0/0x170
[ 1626.609208] wait_for_completion+0x108/0x170
[ 1626.609210] ? wake_up_q+0x70/0x70
[ 1626.609212] ? __xfs_buf_submit+0x12e/0x250
[ 1626.609214] ? xfs_bwrite+0x25/0x60
[ 1626.609215] xfs_buf_iowait+0x22/0xf0
[ 1626.609218] __xfs_buf_submit+0x12e/0x250
[ 1626.609220] xfs_bwrite+0x25/0x60
[ 1626.609222] xfs_reclaim_inode+0x2e8/0x310
[ 1626.609224] xfs_reclaim_inodes_ag+0x1b6/0x300
[ 1626.609227] xfs_reclaim_inodes_nr+0x31/0x40
[ 1626.609228] super_cache_scan+0x152/0x1a0
[ 1626.609231] do_shrink_slab+0x12c/0x2d0
[ 1626.609233] shrink_slab+0x9c/0x2a0
[ 1626.609235] shrink_node+0xd7/0x470
[ 1626.609237] do_try_to_free_pages+0xbf/0x380
[ 1626.609240] try_to_free_pages+0xd9/0x1f0
[ 1626.609245] __alloc_pages_slowpath+0x3a4/0xd30
[ 1626.609251] ? ___slab_alloc+0x238/0x560
[ 1626.609254] __alloc_pages_nodemask+0x30c/0x350
[ 1626.609259] skb_page_frag_refill+0x97/0xd0
[ 1626.609274] sk_page_frag_refill+0x1d/0x80
[ 1626.609279] tcp_sendmsg_locked+0x2bb/0xdd0
[ 1626.609304] tcp_sendmsg+0x27/0x40
[ 1626.609307] sock_sendmsg+0x54/0x60
[ 1626.609308] ___sys_sendmsg+0x29f/0x320
[ 1626.609313] ? sock_poll+0x66/0xb0
[ 1626.609318] ? ep_item_poll.isra.15+0x40/0xc0
[ 1626.609320] ? ep_send_events_proc+0xe6/0x230
[ 1626.609322] ? hrtimer_try_to_cancel+0x54/0xf0
[ 1626.609324] ? ep_read_events_proc+0xc0/0xc0
[ 1626.609326] ? _raw_write_unlock_irq+0xa/0x20
[ 1626.609327] ? ep_scan_ready_list.constprop.19+0x218/0x230
[ 1626.609329] ? __hrtimer_init+0xb0/0xb0
[ 1626.609331] ? _raw_spin_unlock_irq+0xa/0x20
[ 1626.609334] ? ep_poll+0x26c/0x4a0
[ 1626.609337] ? tcp_tsq_write.part.54+0xa0/0xa0
[ 1626.609339] ? release_sock+0x43/0x90
[ 1626.609341] ? _raw_spin_unlock_bh+0xa/0x20
[ 1626.609342] __sys_sendmsg+0x47/0x80
[ 1626.609347] do_syscall_64+0x5f/0x1c0
[ 1626.609349] ? prepare_exit_to_usermode+0x75/0xa0
[ 1626.609351] entry_SYSCALL_64_after_hwframe+0x44/0xa9
This patch adds a new prctl command that daemons can use after they have
done their initial setup, and before they start to do allocations that
are in the IO path. It sets the PF_MEMALLOC_NOIO and PF_LESS_THROTTLE
flags so both userspace block and FS threads can use it to avoid the
allocation recursion and try to prevent from being throttled while
writing out data to free up memory.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Masato Suzuki <masato.suzuki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20191112001900.9206-1-mchristi@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
- Time namespace support:
If a container migrates from one host to another then it expects that
clocks based on MONOTONIC and BOOTTIME are not subject to
disruption. Due to different boot time and non-suspended runtime these
clocks can differ significantly on two hosts, in the worst case time
goes backwards which is a violation of the POSIX requirements.
The time namespace addresses this problem. It allows to set offsets for
clock MONOTONIC and BOOTTIME once after creation and before tasks are
associated with the namespace. These offsets are taken into account by
timers and timekeeping including the VDSO.
Offsets for wall clock based clocks (REALTIME/TAI) are not provided by
this mechanism. While in theory possible, the overhead and code
complexity would be immense and not justified by the esoteric potential
use cases which were discussed at Plumbers '18.
The overhead for tasks in the root namespace (host time offsets = 0) is
in the noise and great effort was made to ensure that especially in the
VDSO. If time namespace is disabled in the kernel configuration the
code is compiled out.
Kudos to Andrei Vagin and Dmitry Sofanov who implemented this feature
and kept on for more than a year addressing review comments, finding
better solutions. A pleasant experience.
- Overhaul of the alarmtimer device dependency handling to ensure that
the init/suspend/resume ordering is correct.
- A new clocksource/event driver for Microchip PIT64
- Suspend/resume support for the Hyper-V clocksource
- The usual pile of fixes, updates and improvements mostly in the
driver code.
-----BEGIN PGP SIGNATURE-----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=x3qT
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timekeeping and timers departement provides:
- Time namespace support:
If a container migrates from one host to another then it expects
that clocks based on MONOTONIC and BOOTTIME are not subject to
disruption. Due to different boot time and non-suspended runtime
these clocks can differ significantly on two hosts, in the worst
case time goes backwards which is a violation of the POSIX
requirements.
The time namespace addresses this problem. It allows to set offsets
for clock MONOTONIC and BOOTTIME once after creation and before
tasks are associated with the namespace. These offsets are taken
into account by timers and timekeeping including the VDSO.
Offsets for wall clock based clocks (REALTIME/TAI) are not provided
by this mechanism. While in theory possible, the overhead and code
complexity would be immense and not justified by the esoteric
potential use cases which were discussed at Plumbers '18.
The overhead for tasks in the root namespace (ie where host time
offsets = 0) is in the noise and great effort was made to ensure
that especially in the VDSO. If time namespace is disabled in the
kernel configuration the code is compiled out.
Kudos to Andrei Vagin and Dmitry Sofanov who implemented this
feature and kept on for more than a year addressing review
comments, finding better solutions. A pleasant experience.
- Overhaul of the alarmtimer device dependency handling to ensure
that the init/suspend/resume ordering is correct.
- A new clocksource/event driver for Microchip PIT64
- Suspend/resume support for the Hyper-V clocksource
- The usual pile of fixes, updates and improvements mostly in the
driver code"
* tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n
alarmtimer: Use wakeup source from alarmtimer platform device
alarmtimer: Make alarmtimer platform device child of RTC device
alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality
hrtimer: Add missing sparse annotation for __run_timer()
lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres()
MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel
clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC
clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources
clocksource/drivers/timer-microchip-pit64b: Fix sparse warning
clocksource/drivers/exynos_mct: Rename Exynos to lowercase
clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access
clocksource/drivers/timer-ti-dm: Switch to platform_get_irq
clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource
clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe
clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource
clocksource/drivers/bcm2835_timer: Fix memory leak of timer
clocksource/drivers/cadence-ttc: Use ttc driver as platform driver
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support
clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page
...
-----BEGIN PGP SIGNATURE-----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=Us3h
-----END PGP SIGNATURE-----
Merge tag 'for-5.6/drivers-2020-01-27' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Like the core side, not a lot of changes here, just two main items:
- Series of patches (via Coly) with fixes for bcache (Coly,
Christoph)
- MD pull request from Song"
* tag 'for-5.6/drivers-2020-01-27' of git://git.kernel.dk/linux-block: (31 commits)
bcache: reap from tail of c->btree_cache in bch_mca_scan()
bcache: reap c->btree_cache_freeable from the tail in bch_mca_scan()
bcache: remove member accessed from struct btree
bcache: print written and keys in trace_bcache_btree_write
bcache: avoid unnecessary btree nodes flushing in btree_flush_write()
bcache: add code comments for state->pool in __btree_sort()
lib: crc64: include <linux/crc64.h> for 'crc64_be'
bcache: use read_cache_page_gfp to read the superblock
bcache: store a pointer to the on-disk sb in the cache and cached_dev structures
bcache: return a pointer to the on-disk sb from read_super
bcache: transfer the sb_page reference to register_{bdev,cache}
bcache: fix use-after-free in register_bcache()
bcache: properly initialize 'path' and 'err' in register_bcache()
bcache: rework error unwinding in register_bcache
bcache: use a separate data structure for the on-disk super block
bcache: cached_dev_free needs to put the sb page
md/raid1: introduce wait_for_serialization
md/raid1: use bucket based mechanism for IO serialization
md: introduce a new struct for IO serialization
md: don't destroy serial_info_pool if serialize_policy is true
...
- Core:
- Support for dynamic channels
- Removal of various slave wrappers
- Make few slave request APIs as private to dmaengine
- Symlinks between channels and slaves
- Support for hotplug of controllers
- Support for metadata_ops for dma_async_tx_descriptor
- Reporting DMA cached data amount
- Virtual dma channel locking updates
- New drivers/device/feature support support:
- Driver for Intel data accelerators
- Driver for TI K3 UDMA
- Driver for PLX DMA engine
- Driver for hisilicon Kunpeng DMA engine
- Support for eDMA support for QorIQ LS1028A in fsl edma driver
- Support for cyclic dma in sun4i driver
- Support for X1830 in JZ4780 driver
-----BEGIN PGP SIGNATURE-----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=mv1v
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This time we have a bunch of core changes to support dynamic channels,
hotplug of controllers, new apis for metadata ops etc along with new
drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and
hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers.
Core:
- Support for dynamic channels
- Removal of various slave wrappers
- Make few slave request APIs as private to dmaengine
- Symlinks between channels and slaves
- Support for hotplug of controllers
- Support for metadata_ops for dma_async_tx_descriptor
- Reporting DMA cached data amount
- Virtual dma channel locking updates
New drivers/device/feature support support:
- Driver for Intel data accelerators
- Driver for TI K3 UDMA
- Driver for PLX DMA engine
- Driver for hisilicon Kunpeng DMA engine
- Support for eDMA support for QorIQ LS1028A in fsl edma driver
- Support for cyclic dma in sun4i driver
- Support for X1830 in JZ4780 driver"
* tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits)
dmaengine: Create symlinks between DMA channels and slaves
dmaengine: hisilicon: Add Kunpeng DMA engine support
dmaengine: idxd: add char driver to expose submission portal to userland
dmaengine: idxd: connect idxd to dmaengine subsystem
dmaengine: idxd: add descriptor manipulation routines
dmaengine: idxd: add sysfs ABI for idxd driver
dmaengine: idxd: add configuration component of driver
dmaengine: idxd: Init and probe for Intel data accelerators
dmaengine: add support to dynamic register/unregister of channels
dmaengine: break out channel registration
x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction
dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"
dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"
dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h
dmaengine: Remove dma_request_slave_channel_compat() wrapper
dmaengine: Remove dma_device_satisfies_mask() wrapper
dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string
dmaengine: zynqmp_dma: fix burst length configuration
dmaengine: sun4i: Add support for cyclic requests with dedicated DMA
dmaengine: fsl-qdma: fix duplicated argument to &&
...
Pull HID updates from Jiri Kosina:
"This time it's surprisingly quiet (probably due to the christmas
break):
- Logitech HID++ protocol improvements from Mazin Rezk, Pedro
Vanzella and Adrian Freund
- support for hidraw uniq ioctl from Marcel Holtmann"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: avoid duplicate error handling code in 'hidpp_probe()'
hid-logitech-hidpp: read battery voltage from newer devices
HID: logitech: Add MX Master 3 Mouse
HID: logitech-hidpp: Support WirelessDeviceStatus connect events
HID: logitech-hidpp: Support translations from short to long reports
HID: hidraw: add support uniq ioctl
- New architecture features
* Support for Armv8.5 E0PD, which benefits KASLR in the same way as
KPTI but without the overhead. This allows KPTI to be disabled on
CPUs that are not affected by Meltdown, even is KASLR is enabled.
* Initial support for the Armv8.5 RNG instructions, which claim to
provide access to a high bandwidth, cryptographically secure hardware
random number generator. As well as exposing these to userspace, we
also use them as part of the KASLR seed and to seed the crng once
all CPUs have come online.
* Advertise a bunch of new instructions to userspace, including support
for Data Gathering Hint, Matrix Multiply and 16-bit floating point.
- Kexec
* Cleanups in preparation for relocating with the MMU enabled
* Support for loading crash dump kernels with kexec_file_load()
- Perf and PMU drivers
* Cleanups and non-critical fixes for a couple of system PMU drivers
- FPU-less (aka broken) CPU support
* Considerable fixes to support CPUs without the FP/SIMD extensions,
including their presence in heterogeneous systems. Good luck finding
a 64-bit userspace that handles this.
- Modern assembly function annotations
* Start migrating our use of ENTRY() and ENDPROC() over to the
new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended to
aid debuggers
- Kbuild
* Cleanup detection of LSE support in the assembler by introducing
'as-instr'
* Remove compressed Image files when building clean targets
- IP checksumming
* Implement optimised IPv4 checksumming routine when hardware offload
is not in use. An IPv6 version is in the works, pending testing.
- Hardware errata
* Work around Cortex-A55 erratum #1530923
- Shadow call stack
* Work around some issues with Clang's integrated assembler not liking
our perfectly reasonable assembly code
* Avoid allocating the X18 register, so that it can be used to hold the
shadow call stack pointer in future
- ACPI
* Fix ID count checking in IORT code. This may regress broken firmware
that happened to work with the old implementation, in which case we'll
have to revert it and try something else
* Fix DAIF corruption on return from GHES handler with pseudo-NMIs
- Miscellaneous
* Whitelist some CPUs that are unaffected by Spectre-v2
* Reduce frequency of ASID rollover when KPTI is compiled in but
inactive
* Reserve a couple of arch-specific PROT flags that are already used by
Sparc and PowerPC and are planned for later use with BTI on arm64
* Preparatory cleanup of our entry assembly code in preparation for
moving more of it into C later on
* Refactoring and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl4oY+IQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNNfRB/4p3vax0hqaOnLRvmJPRXF31B8oPlivnr2u
6HCA9LkdU5IlrgaTNOJ/sQEqJAPOPCU7v49Ol0iYw0iKL1suUE7Ikui5VB6Uybqt
YbfF5UNzfXAMs2A86TF/hzqhxw+W+lpnZX8NVTuQeAODfHEGUB1HhTLfRi9INsER
wKEAuoZyuSUibxTFvji+DAq7nVRniXX7CM7tE385pxDisCMuu/7E5wOl+3EZYXWz
DTGzTbHXuVFL+UFCANFEUlAtmr3dQvPFIqAwVl/CxjRJjJ7a+/G3cYLsHFPrQCjj
qYX4kfhAeeBtqmHL7YFNWFwFs5WaT5UcQquFO665/+uCTWSJpORY
=AIh/
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The changes are a real mixed bag this time around.
The only scary looking one from the diffstat is the uapi change to
asm-generic/mman-common.h, but this has been acked by Arnd and is
actually just adding a pair of comments in an attempt to prevent
allocation of some PROT values which tend to get used for
arch-specific purposes. We'll be using them for Branch Target
Identification (a CFI-like hardening feature), which is currently
under review on the mailing list.
New architecture features:
- Support for Armv8.5 E0PD, which benefits KASLR in the same way as
KPTI but without the overhead. This allows KPTI to be disabled on
CPUs that are not affected by Meltdown, even is KASLR is enabled.
- Initial support for the Armv8.5 RNG instructions, which claim to
provide access to a high bandwidth, cryptographically secure
hardware random number generator. As well as exposing these to
userspace, we also use them as part of the KASLR seed and to seed
the crng once all CPUs have come online.
- Advertise a bunch of new instructions to userspace, including
support for Data Gathering Hint, Matrix Multiply and 16-bit
floating point.
Kexec:
- Cleanups in preparation for relocating with the MMU enabled
- Support for loading crash dump kernels with kexec_file_load()
Perf and PMU drivers:
- Cleanups and non-critical fixes for a couple of system PMU drivers
FPU-less (aka broken) CPU support:
- Considerable fixes to support CPUs without the FP/SIMD extensions,
including their presence in heterogeneous systems. Good luck
finding a 64-bit userspace that handles this.
Modern assembly function annotations:
- Start migrating our use of ENTRY() and ENDPROC() over to the
new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended
to aid debuggers
Kbuild:
- Cleanup detection of LSE support in the assembler by introducing
'as-instr'
- Remove compressed Image files when building clean targets
IP checksumming:
- Implement optimised IPv4 checksumming routine when hardware offload
is not in use. An IPv6 version is in the works, pending testing.
Hardware errata:
- Work around Cortex-A55 erratum #1530923
Shadow call stack:
- Work around some issues with Clang's integrated assembler not
liking our perfectly reasonable assembly code
- Avoid allocating the X18 register, so that it can be used to hold
the shadow call stack pointer in future
ACPI:
- Fix ID count checking in IORT code. This may regress broken
firmware that happened to work with the old implementation, in
which case we'll have to revert it and try something else
- Fix DAIF corruption on return from GHES handler with pseudo-NMIs
Miscellaneous:
- Whitelist some CPUs that are unaffected by Spectre-v2
- Reduce frequency of ASID rollover when KPTI is compiled in but
inactive
- Reserve a couple of arch-specific PROT flags that are already used
by Sparc and PowerPC and are planned for later use with BTI on
arm64
- Preparatory cleanup of our entry assembly code in preparation for
moving more of it into C later on
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (73 commits)
arm64: acpi: fix DAIF manipulation with pNMI
arm64: kconfig: Fix alignment of E0PD help text
arm64: Use v8.5-RNG entropy for KASLR seed
arm64: Implement archrandom.h for ARMv8.5-RNG
arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'
arm64: entry: Avoid empty alternatives entries
arm64: Kconfig: select HAVE_FUTEX_CMPXCHG
arm64: csum: Fix pathological zero-length calls
arm64: entry: cleanup sp_el0 manipulation
arm64: entry: cleanup el0 svc handler naming
arm64: entry: mark all entry code as notrace
arm64: assembler: remove smp_dmb macro
arm64: assembler: remove inherit_daif macro
ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()
mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use
arm64: Use macros instead of hard-coded constants for MAIR_EL1
arm64: Add KRYO{3,4}XX CPU cores to spectre-v2 safe list
arm64: kernel: avoid x18 in __cpu_soft_restart
arm64: kvm: stop treating register x18 as caller save
arm64/lib: copy_page: avoid x18 register in assembler code
...
A pretty big release this time around, a lot of new drivers and both
Morimoto-san and Takashi were doing subsystem wide updates as well:
- Further big refactorings from Morimoto-san simplifying the core
interfaces and moving things to the component level.
- Transition of drivers to managed buffer allocation and removal of
redundant PCM ioctls.
- New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm
WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011, RT1015
and RT1308.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl4vEpMTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0KN+B/47oBWAdJYYSrwXyQtlQgpJv/o9fEB+
OnhlvCVjC3gPc8rBnUmgyUNYpBEqtmIH1CVdG/2844e0w1g9JJ5UFPp0SJWZp3Nu
toRznG64JKE0l9qZsLMOKXbPAtb/KvANM1dy7eTTtbHQhP4jA72f3jmDKfLDa/Xc
vsOBWhBKKAkffu9AIYuMLG2sxuyw0lX3T1yxx7BfJE9NzHXwhYaBP7loLoQn33xg
9DrjNuT+gTadUZKsZRw0kNBWC9IIryZ9oGFrfORI51G41sD2DgY3u0xd+Tm44XXe
UPwUFxDSMslpIKKu6jn/14TjbOZX2i2D2bYs8DRcppA38Ltdc70DzbgV
=C1LS
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.6
A pretty big release this time around, a lot of new drivers and both
Morimoto-san and Takashi were doing subsystem wide updates as well:
- Further big refactorings from Morimoto-san simplifying the core
interfaces and moving things to the component level.
- Transition of drivers to managed buffer allocation and removal of
redundant PCM ioctls.
- New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm
WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011, RT1015
and RT1308.
heap buffer is used as output of GP and input of PP for
Mali Utgard GPU. Size of heap buffer depends on the task
so is a runtime variable.
Previously we just create a large enough buffer as heap
buffer. Now we add a heap buffer type to be able to
increase the backup memory dynamically when GP fail due
to lack of heap memory.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-4-yuq825@gmail.com
Send ETHTOOL_MSG_WOL_NTF notification whenever wake-on-lan settings of
a device are modified using ETHTOOL_MSG_WOL_SET netlink message or
ETHTOOL_SWOL ioctl request.
As notifications can be received by anyone, do not include SecureOn(tm)
password in notification messages.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement WOL_SET netlink request to set wake-on-lan settings. This is
equivalent to ETHTOOL_SWOL ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement WOL_GET request to get wake-on-lan settings for a device,
traditionally available via ETHTOOL_GWOL ioctl request.
As part of the implementation, provide symbolic names for wake-on-line
modes as ETH_SS_WOL_MODES string set.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send ETHTOOL_MSG_DEBUG_NTF notification message whenever debugging message
mask for a device are modified using ETHTOOL_MSG_DEBUG_SET netlink message
or ETHTOOL_SMSGLVL ioctl request.
The notification message has the same format as reply to DEBUG_GET request.
As with other ethtool notifications, netlink requests only trigger the
notification if the mask is actually changed while ioctl request trigger it
whenever the request results in calling the ethtool_ops handler.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement DEBUG_SET netlink request to set debugging settings for a device.
At the moment, only message mask corresponding to message level as set by
ETHTOOL_SMSGLVL ioctl request can be set. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement DEBUG_GET request to get debugging settings for a device. At the
moment, only message mask corresponding to message level as reported by
ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)
As part of the implementation, provide symbolic names for message mask bits
as ETH_SS_MSG_CLASSES string set.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new nested netlink attribute, NFTA_SET_DESC_CONCAT, used
to specify the length of each field in a set concatenation.
This allows set implementations to support concatenation of multiple
ranged items, as they can divide the input key into matching data for
every single field. Such set implementations would be selected as
they specify support for NFT_SET_INTERVAL and allow desc->field_count
to be greater than one. Explicitly disallow this for nft_set_rbtree.
In order to specify the interval for a set entry, userspace would
include in NFTA_SET_DESC_CONCAT attributes field lengths, and pass
range endpoints as two separate keys, represented by attributes
NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_KEY_END.
While at it, export the number of 32-bit registers available for
packet matching, as nftables will need this to know the maximum
number of field lengths that can be specified.
For example, "packets with an IPv4 address between 192.0.2.0 and
192.0.2.42, with destination port between 22 and 25", can be
expressed as two concatenated elements:
NFTA_SET_ELEM_KEY: 192.0.2.0 . 22
NFTA_SET_ELEM_KEY_END: 192.0.2.42 . 25
and NFTA_SET_DESC_CONCAT attribute would contain:
NFTA_LIST_ELEM
NFTA_SET_FIELD_LEN: 4
NFTA_LIST_ELEM
NFTA_SET_FIELD_LEN: 2
v4: No changes
v3: Complete rework, NFTA_SET_DESC_CONCAT instead of NFTA_SET_SUBKEY
v2: No changes
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add NFTA_SET_ELEM_KEY_END attribute to convey the closing element of the
interval between kernel and userspace.
This patch also adds the NFT_SET_EXT_KEY_END extension to store the
closing element value in this interval.
v4: No changes
v3: New patch
[sbrivio: refactor error paths and labels; add corresponding
nft_set_ext_type for new key; rebase]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Using IPv6 flow-label to swiftly route around avoid congested or
disconnected network path can greatly improve TCP reliability.
This patch adds SNMP counters and a OPT_STATS counter to track both
host-level and connection-level statistics. Network administrators
can use these counters to evaluate the impact of this new ability better.
Export count for rehash attempts to
1) two SNMP counters: TcpTimeoutRehash (rehash due to timeouts),
and TcpDuplicateDataRehash (rehash due to receiving duplicate
packets)
2) Timestamping API SOF_TIMESTAMPING_OPT_STATS.
Signed-off-by: Abdul Kabbani <akabbani@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first per-vlan option added is state, it is needed for EVPN and for
per-vlan STP. The state allows to control the forwarding on per-vlan
basis. The vlan state is considered only if the port state is forwarding
in order to avoid conflicts and be consistent. br_allowed_egress is
called only when the state is forwarding, but the ingress case is a bit
more complicated due to the fact that we may have the transition between
port:BR_STATE_FORWARDING -> vlan:BR_STATE_LEARNING which should still
allow the bridge to learn from the packet after vlan filtering and it will
be dropped after that. Also to optimize the pvid state check we keep a
copy in the vlan group to avoid one lookup. The state members are
modified with *_ONCE() to annotate the lockless access.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for option modification of single vlans and
ranges. It allows to only modify options, i.e. skip create/delete by
using the BRIDGE_VLAN_INFO_ONLY_OPTS flag. When working with a range
option changes we try to pack the notifications as much as possible.
v2: do full port (all vlans) notification only when creating/deleting
vlans for compatibility, rework the range detection when changing
options, add more verbose extack errors and check if a vlan should
be used (br_vlan_should_use checks)
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The idxd driver introduces the Intel Data Stream Accelerator [1] that will
be available on future Intel Xeon CPUs. One of the kernel access
point for the driver is through the dmaengine subsystem. It will initially
provide the DMA copy service to the kernel.
Some of the main functionality introduced with this accelerator
are: shared virtual memory (SVM) support, and descriptor submission using
Intel CPU instructions movdir64b and enqcmds. There will be additional
accelerator devices that share the same driver with variations to
capabilities.
This commit introduces the probe and initialization component of the
driver.
[1]: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/157965023991.73301.6186843973135311580.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Avoid a pointless dependency on buffer heads in bcache by simply open
coding reading a single page. Also add a SB_OFFSET define for the
byte offset of the superblock instead of using magic numbers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out an on-disk version struct cache_sb with the proper endianness
annotations. This fixes a fair chunk of sparse warnings, but there are
some left due to the way the checksum is defined.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Principles:
- Packets are classified on flows.
- This is a Stochastic model (as we use a hash, several flows might
be hashed to the same slot)
- Each flow has a PIE managed queue.
- Flows are linked onto two (Round Robin) lists,
so that new flows have priority on old ones.
- For a given flow, packets are not reordered.
- Drops during enqueue only.
- ECN capability is off by default.
- ECN threshold (if ECN is enabled) is at 10% by default.
- Uses timestamps to calculate queue delay by default.
Usage:
tc qdisc ... fq_pie [ limit PACKETS ] [ flows NUMBER ]
[ target TIME ] [ tupdate TIME ]
[ alpha NUMBER ] [ beta NUMBER ]
[ quantum BYTES ] [ memory_limit BYTES ]
[ ecnprob PERCENTAGE ] [ [no]ecn ]
[ [no]bytemode ] [ [no_]dq_rate_estimator ]
defaults:
limit: 10240 packets, flows: 1024
target: 15 ms, tupdate: 15 ms (in jiffies)
alpha: 1/8, beta : 5/4
quantum: device MTU, memory_limit: 32 Mb
ecnprob: 10%, ecn: off
bytemode: off, dq_rate_estimator: off
Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Signed-off-by: Sachin D. Patil <sdp.sachin@gmail.com>
Signed-off-by: V. Saicharan <vsaicharan1998@gmail.com>
Signed-off-by: Mohit Bhasi <mohitbhasi1998@gmail.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-01-22
The following pull-request contains BPF updates for your *net-next* tree.
We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).
The main changes are:
1) function by function verification and program extensions from Alexei.
2) massive cleanup of selftests/bpf from Toke and Andrii.
3) batched bpf map operations from Brian and Yonghong.
4) tcp congestion control in bpf from Martin.
5) bulking for non-map xdp_redirect form Toke.
6) bpf_send_signal_thread helper from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a helper to read the 64bit jiffies. It will be used
in a later patch to implement the bpf_cubic.c.
The helper is inlined for jit_requested and 64 BITS_PER_LONG
as the map_gen_lookup(). Other cases could be considered together
with map_gen_lookup() if needed.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200122233646.903260-1-kafai@fb.com
- it changes enable and disable callback functions names of
struct exynos_drm_crtc_ops to atomic_enable and atomic_disable
for consistency.
Modify "EXYNOS" prefix to "Exynos"
- "Exynos" name is a regular trademarked name promoted by its
manufacturer, Samsung Electronics Co., Ltd.. This patch
corrects the name.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tE0S
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Change Exynos DRM specific callback function names
- it changes enable and disable callback functions names of
struct exynos_drm_crtc_ops to atomic_enable and atomic_disable
for consistency.
Modify "EXYNOS" prefix to "Exynos"
- "Exynos" name is a regular trademarked name promoted by its
manufacturer, Samsung Electronics Co., Ltd.. This patch
corrects the name.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1579567970-4467-1-git-send-email-inki.dae@samsung.com
Introduce dynamic program extensions. The users can load additional BPF
functions and replace global functions in previously loaded BPF programs while
these programs are executing.
Global functions are verified individually by the verifier based on their types only.
Hence the global function in the new program which types match older function can
safely replace that corresponding function.
This new function/program is called 'an extension' of old program. At load time
the verifier uses (attach_prog_fd, attach_btf_id) pair to identify the function
to be replaced. The BPF program type is derived from the target program into
extension program. Technically bpf_verifier_ops is copied from target program.
The BPF_PROG_TYPE_EXT program type is a placeholder. It has empty verifier_ops.
The extension program can call the same bpf helper functions as target program.
Single BPF_PROG_TYPE_EXT type is used to extend XDP, SKB and all other program
types. The verifier allows only one level of replacement. Meaning that the
extension program cannot recursively extend an extension. That also means that
the maximum stack size is increasing from 512 to 1024 bytes and maximum
function nesting level from 8 to 16. The programs don't always consume that
much. The stack usage is determined by the number of on-stack variables used by
the program. The verifier could have enforced 512 limit for combined original
plus extension program, but it makes for difficult user experience. The main
use case for extensions is to provide generic mechanism to plug external
programs into policy program or function call chaining.
BPF trampoline is used to track both fentry/fexit and program extensions
because both are using the same nop slot at the beginning of every BPF
function. Attaching fentry/fexit to a function that was replaced is not
allowed. The opposite is true as well. Replacing a function that currently
being analyzed with fentry/fexit is not allowed. The executable page allocated
by BPF trampoline is not used by program extensions. This inefficiency will be
optimized in future patches.
Function by function verification of global function supports scalars and
pointer to context only. Hence program extensions are supported for such class
of global functions only. In the future the verifier will be extended with
support to pointers to structures, arrays with sizes, etc.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200121005348.2769920-2-ast@kernel.org
-----BEGIN PGP SIGNATURE-----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=oNaB
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.5-2020-01-22' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"This was supposed to have gone in last week, but due to a brain fart
on my part, I forgot that we made this struct addition in the 5.5
cycle. So here it is for 5.5, to prevent having a 32 vs 64-bit
compatability issue with the files_update command"
* tag 'io_uring-5.5-2020-01-22' of git://git.kernel.dk/linux-block:
io_uring: fix compat for IORING_REGISTER_FILES_UPDATE
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCXiVO8AAKCRAp8NhrnBAZ
scTrAP9gb0d3qv0IOtHw5aGI1DAgjTUn/SzUOnsjDEn7DIoh9gEA2+ZmaEyLXKrl
+UcZb31auy5P8ueJYokRLhLAyRcOIAg=
=yaHb
-----END PGP SIGNATURE-----
Merge tag 'rds-odp-for-5.5' into rdma.git for-next
From https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma
Leon Romanovsky says:
====================
Use ODP MRs for kernel ULPs
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
====================
* tag 'rds-odp-for-5.5':
net/rds: Use prefetch for On-Demand-Paging MR
net/rds: Handle ODP mr registration/unregistration
net/rds: Detect need of On-Demand-Paging memory registration
RDMA/mlx5: Fix handling of IOVA != user_va in ODP paths
IB/mlx5: Mask out unsupported ODP capabilities for kernel QPs
RDMA/mlx5: Don't fake udata for kernel path
IB/mlx5: Add ODP WQE handlers for kernel QPs
IB/core: Add interface to advise_mr for kernel users
IB/core: Introduce ib_reg_user_mr
IB: Allow calls to ib_umem_get from kernel ULPs
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-01-21
1) Add support for TCP encapsulation of IKE and ESP messages,
as defined by RFC 8229. Patchset from Sabrina Dubroca.
Please note that there is a merge conflict in:
net/unix/af_unix.c
between commit:
3c32da19a8 ("unix: Show number of pending scm files of receive queue in fdinfo")
from the net-next tree and commit:
b50b0580d2 ("net: add queue argument to __skb_wait_for_more_packets and __skb_{,try_}recv_datagram")
from the ipsec-next tree.
The conflict can be solved as done in linux-next.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This enables you to configure mode (DTE/DCE), Modulo, Window, T1, T2, N2 via
sethdlc (which needs to be patched as well).
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.
"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
For each IOSQE_* flag there is a corresponding REQ_F_* flag. And there
is a repetitive pattern of their translation:
e.g. if (sqe->flags & SQE_FLAG*) req->flags |= REQ_F_FLAG*
Use same numeric values/bits for them and copy instead of manual
handling.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The application currently has no way of knowing if a given opcode is
supported or not without having to try and issue one and see if we get
-EINVAL or not. And even this approach is fraught with peril, as maybe
we're getting -EINVAL due to some fields being missing, or maybe it's
just not that easy to issue that particular command without doing some
other leg work in terms of setup first.
This adds IORING_REGISTER_PROBE, which fills in a structure with info
on what it supported or not. This will work even with sparse opcode
fields, which may happen in the future or even today if someone
backports specific features to older kernels.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for the new openat2(2) system call. It's trivial to do, as
we can have openat(2) just be wrapped around it.
Suggested-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an application is using eventfd notifications with poll to know when
new SQEs can be issued, it's expecting the following read/writes to
complete inline. And with that, it knows that there are events available,
and don't want spurious wakeups on the eventfd for those requests.
This adds IORING_REGISTER_EVENTFD_ASYNC, which works just like
IORING_REGISTER_EVENTFD, except it only triggers notifications for events
that happen from async completions (IRQ, or io-wq worker completions).
Any completions inline from the submission itself will not trigger
notifications.
Suggested-by: Mark Papadakis <markuspapadakis@icloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some applications like to start small in terms of ring size, and then
ramp up as needed. This is a bit tricky to do currently, since we don't
advertise the max ring size.
This adds IORING_SETUP_CLAMP. If set, and the values for SQ or CQ ring
size exceed what we support, then clamp them at the max values instead
of returning -EINVAL. Since we return the chosen ring sizes after setup,
no further changes are needed on the application side. io_uring already
changes the ring sizes if the application doesn't ask for power-of-two
sizes, for example.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for doing madvise(2) through io_uring. We assume that
any operation can block, and hence punt everything async. This could be
improved, but hard to make bullet proof. The async punt ensures it's
safe.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for doing fadvise through io_uring. We assume that
WILLNEED doesn't block, but that DONTNEED may block.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This behaves like preadv2/pwritev2 with offset == -1, it'll use (and
update) the current file position. This obviously comes with the caveat
that if the application has multiple read/writes in flight, then the
end result will not be as expected. This is similar to threads sharing
a file descriptor and doing IO using the current file position.
Since this feature isn't easily detectable by doing a read or write,
add a feature flags, IORING_FEAT_RW_CUR_POS, to allow applications to
detect presence of this feature.
Reported-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For uses cases that don't already naturally have an iovec, it's easier
(or more convenient) to just use a buffer address + length. This is
particular true if the use case is from languages that want to create
a memory safe abstraction on top of io_uring, and where introducing
the need for the iovec may impose an ownership issue. For those cases,
they currently need an indirection buffer, which means allocating data
just for this purpose.
Add basic read/write that don't require the iovec.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring defaults to always doing inline submissions, if at all
possible. But for larger copies, even if the data is fully cached, that
can take a long time. Add an IOSQE_ASYNC flag that the application can
set on the SQE - if set, it'll ensure that we always go async for those
kinds of requests. Use the io-wq IO_WQ_WORK_CONCURRENT flag to ensure we
get the concurrency we desire for this case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently fully quiesce the ring before an unregister or update of
the fixed fileset. This is very expensive, and we can be a bit smarter
about this.
Add a percpu refcount for the file tables as a whole. Grab a percpu ref
when we use a registered file, and put it on completion. This is cheap
to do. Upon removal of a file from a set, switch the ref count to atomic
mode. When we hit zero ref on the completion side, then we know we can
drop the previously registered files. When the old files have been
dropped, switch the ref back to percpu mode for normal operation.
Since there's a period between doing the update and the kernel being
done with it, add a IORING_OP_FILES_UPDATE opcode that can perform the
same action. The application knows the update has completed when it gets
the CQE for it. Between doing the update and receiving this completion,
the application must continue to use the unregistered fd if submitting
IO on this particular file.
This takes the runtime of test/file-register from liburing from 14s to
about 0.7s.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This works just like close(2), unsurprisingly. We remove the file
descriptor and post the completion inline, then offload the actual
(potential) last file put to async context.
Mark the async part of this work as uncancellable, as we really must
guarantee that the latter part of the close is run.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This works just like openat(2), except it can be performed async. For
the normal case of a non-blocking path lookup this will complete
inline. If we have to do IO to perform the open, it'll be done from
async context.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lukas Wunner
Andrey Konovalov
Vinod Koul
Paolo Bonzini
Jay Zhou
Willy Tarreau
Era Mayflower
Gustavo A. R. Silva
Xin Long
Manoj Basapathi
Petr Machata
David S. Miller
Eelco Chaudron
Carlos Neira
Linus Torvalds
Dave Airlie
Michal Kubecek
Marco Felsch
Paolo Lungaroni
Mark Brown
Jens Axboe
Tony Luck
Jason Gunthorpe
Yishai Hadas
Yousuk Seung
Jiri Pirko
Yong Zhao
Ingo Molnar
Tycho Andersen
KP Singh
Andrii Nakryiko
Willem de Bruijn
Parav Pandit
Mike Snitzer
Pavel Begunkov
Tomasz Lauda
Martin KaFai Lau
Christian Borntraeger
Janosch Frank
Chris Wilson
Martin Varghese
Eugen Hristev
Tamizh chelvam
Johannes Berg
Jouni Malinen
Zhangfei Gao
Kenneth Lee
Arnd Bergmann
Alexandru Gagniuc
Daniel Xu
Aya Levin
Toke Høiland-Jørgensen
James Smart
Florian Westphal
Matteo Croce
Arjun Roy
Christian Brauner
Bartosz Golaszewski
Kan Liang
Peter Chen
Markus Theil
Veerendranath Jakkam
Haim Dreyfuss
Damien Le Moal
Dmitry Torokhov
Yury Norov
Hao Lee
Bjorn Helgaas
Ranjani Sridharan
Ben Skeggs
Mike Christie
Takashi Iwai
Qiang Yu
Stefano Brivio
Pablo Neira Ayuso
Abdul Kabbani
Nikolay Aleksandrov
Dave Jiang
Christoph Hellwig
Mohit P. Tahiliani
Alexei Starovoitov
Martin Schiller
Krzysztof Kozlowski