Граф коммитов

43 Коммитов

Автор SHA1 Сообщение Дата
Andrea Gelmini a5c4300389 arch/sh/lib/strlen.S: Checkpatch cleanup
arch/sh/lib/strlen.S:38: ERROR: trailing whitespace

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-24 08:11:07 +09:00
Andrea Gelmini 5499b45190 arch/sh/lib/libgcc.h: Checkpatch cleanup
arch/sh/lib/libgcc.h:21: ERROR: open brace '{' following union go on the same line

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-01 11:57:29 +09:00
Stuart Menefy dfc349402d sh: Optimised memset for SH4
Optimised version of memset for the SH4 which uses movca.l.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-24 16:28:43 +09:00
Paul Mundt a2494b9b5f sh: Kill off dcache writeback from copy_page().
Now that the cache purging is handled manually by all copy_page()
callers, we can kill off copy_page()'s on writeback. This optimizes the
non-aliasing case.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-08 16:23:08 +09:00
Paul Mundt ac6a0cf671 Merge branch 'master' into sh/smp
Conflicts:
	arch/sh/mm/cache-sh4.c
2009-09-01 13:54:14 +09:00
Stuart Menefy bd4fb4d4c1 sh: Fix underflow in SH udelay() code.
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 18:18:50 +09:00
Stuart Menefy fea966f756 sh: Remove implicit sign extension from assembler immediates
The SH instruction set has several instructions which accept an 8 bit
immediate operand. For logical instructions this operand is zero extended,
for arithmetic instructions the operand is sign extended. After adding an
option to the assembler to check this, it was found that several pieces
of assembly code were assuming this behaviour, and in one case
getting it wrong.

So this patch explicitly sign extends any immediate operands, which makes
it obvious what is happening, and fixes the one case which got it wrong.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 17:09:53 +09:00
Paul Mundt 221c007b02 sh: Rename arch/sh/lib/clear_page.S -> __clear_user.S.
Now that this only contains the __clear_user() function, rename it
accordingly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-27 20:55:46 +09:00
Paul Mundt dfff0fa65a sh: wire up clear_user_highpage() for sh4, convert sh7705.
This wires up clear_user_highpage() on SH-4 and subsequently converts the
SH7705 32kB cache mode over to using it. Now that the SH-4 implementation
handles all of the dcache purging directly in the aliasing case, there is
no need to do this in the default clear_page() implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-27 20:53:22 +09:00
Paul Mundt e460ab27b6 sh: Fix up stack overflow check with ftrace disabled.
Presently the STACK_CHECK() code is called in to multiple times, although
it's only necessary from the mcount entry. The code still attempts to
treat the nop case as an ftrace path resulting in superfluous code flow
for the case where ftrace is disabled. And finally, this also fixes up
references to a few undefined symbols when FUNCTION_TRACER=n.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 21:06:53 +09:00
Paul Mundt a470b95e99 sh: Fix up ftrace build error when STACK_DEBUG=n.
Presently the closest reference to function_trace_stop is within a
CONFIG_STACK_DEBUG block. When this is turned off, the build bails out
with a pcrel too far error. Reorder things a bit to handle the various
combinations.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 20:33:34 +09:00
Paul Mundt 473d1cf4ee sh: Decouple mcount from ftrace.
This adds a general CONFIG_MCOUNT in order to permit mcount generation
without ftrace support. This is primarily for allowing platforms to
enable aggressive stack overflow checking without having to enable ftrace
support. Based on the sparc64 implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 19:56:58 +09:00
Matt Fleming 327933f5d6 sh: Function graph tracer support
Add both dynamic and static function graph tracer support for sh.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 10:08:01 +09:00
Matt Fleming b99610fb9c sh: Provide diagnostic kernel stack checks
Enable kernel stack checking code in both the dynamic ftrace and mcount
code paths. Check the stack to see if it's overflowing and make sure
that the stack pointer contains an address that's either in init_stack
or after the bss.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 10:07:58 +09:00
Matt Fleming c652d780c9 sh: Add ftrace syscall tracing support
Now that I've added TIF_SYSCALL_FTRACE the thread flags do not fit into
a single byte any more. Code testing them now needs to be aware of the
upper and lower bytes.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-06 20:16:33 +09:00
Matt Fleming c1340c053b sh: Define HAVE_FUNCTION_TRACE_MCOUNT_TEST
Enable HAVE_FUNCTION_TRACE_MCOUNT_TEST and test the value of
function_trace_stop from our assembly code as opposed to using the
generic C function. This should optimise our mcount/ftrace code path.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-06 19:53:53 +09:00
Stuart Menefy cadc4e1a2b sh: Handle calling csum_partial with misaligned data
In rare circumstances csum_partial() can be called with data which is
not 16 or 32 bit aligned. This is been observed with RPC calls for NFS
file systems for example. Add support for handling this without resorting
to the misaligned fixup code (which is why this hasn't been seen as a
problem). This mimics the i386 version, which has had this support for
some time.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 11:56:02 +09:00
Takashi YOSHII 3b041227f7 sh: Add plain udivsi3 (not _i4*) for gcc-4.1 and lower.
We chan't share code for udivsi3 and udivsi3_i4, because they
have a different clobber list. Copy udivsi3 from gcc-4.1.2.

As shown in arch/sh/lib/udivsi3.S (and -Os.S),

  .global __udivsi3_i4i
  .global __udivsi3_i4
  .global __udivsi3
__udivsi3_i4i:
  ...

Three symbols are sharing one code, which is actually udivsi3_i4i.
But, this results unwanted code with gcc 4.1.

In gcc, these three are treated as pseudo instructions that have
their own clobber list apart from the usual calling convention.

According to sh's machine description. The clobber list is as
follows:

 - udivsi3_i4i : t,r1,pr,mach,macl
 - udivsi3_i4  : t,r0,r1,r4,r5,pr,dr0,dr2,dr4
 - udivsi3     : t,r4,pr

The caller of udivsi3 will be left with a broken r1 and mac*.

gcc-4.1.x and older(at least to 3.4) generate udivsi3.
ST's gcc-4.1.1 seems to be OK because it has _i4i.

Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:53 +09:00
Paul Mundt 9ef100287a sh: Add exports for __udivsi3/__sdivsi3 and the _i4 versions.
Needed by older compilers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:54 +09:00
Paul Mundt 1aad54a99b sh: Migrate necessary libgcc bits in to arch/sh/lib for SUPERH32.
This moves in the necessary libgcc bits for SUPERH32 and drops the
libgcc linking for the regular targets. This in turn allows us to rip
out quite a few hacks both in sh_ksyms_32 and arch/sh/Makefile.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:53 +09:00
Matt Fleming fad57feba7 sh: dynamic ftrace support.
First cut at dynamic ftrace support.

Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:52 +09:00
Stuart MENEFY 5d52013cbb sh: __copy_user function can corrupt the stack in case of exception
The __copy_user function can corrupt the stack in the case of a
non-trivial length of data, and either of the first two move instructions
cause an exception. This is because the fixup for these two instructions
is mapped to the no_pop case, but these instructions execute after the
stack is pushed.

This change creates an explicit NO_POP exception mapping macro, and uses
it for the two instructions executed in the trivial case where no stack
pushes occur.

More information at ST Linux bugzilla:

	https://bugzilla.stlinux.com/show_bug.cgi?id=4824

Signed-off-by: Dylan Reid <dylan_reid@bose.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-11-13 17:40:30 +09:00
Paul Mundt 64c9627c26 sh: Fix up the __raw_read/writeX() definitions.
These were doing largely bogus things and using the wrong typing for
the address. Bring these in line with the ARM definitions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01 15:12:27 +09:00
Paul Mundt fa43972fab sh: fixup many sparse errors.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:04 +09:00
Adrian Bunk e3b0860090 move arch/sh/lib/io.o to obj-y
EXPORT_SYMBOL's in lib-y considered harmful:

<--  snip  -->

...
  MODPOST 1837 modules
ERROR: "__raw_readsl" [drivers/ssb/ssb.ko] undefined!
ERROR: "__raw_writesl" [drivers/ssb/ssb.ko] undefined!
ERROR: "__raw_writesl" [drivers/net/smc91x.ko] undefined!
ERROR: "__raw_readsl" [drivers/net/smc91x.ko] undefined!
ERROR: "__raw_writesl" [drivers/net/3c59x.ko] undefined!
ERROR: "__raw_readsl" [drivers/net/3c59x.ko] undefined!
...
make[2]: *** [__modpost] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:28 +09:00
Hideo Saito e08b954c9a sh: Fix up optimized SH-4 memcpy on big endian.
Signed-off-by: Hideo Saito <saito@densan.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16 14:55:07 +09:00
Paul Mundt 5c0cbd74bb sh: Allow optimized clear/copy page routines to be used on SH-2.
Presently these are restricted to SH-3 and SH-4, so we reorder the
ifdefs a bit to let other parts use these also.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:02 -07:00
Paul Mundt 325df7f204 sh: Explicit alignment for PAGE_SIZE in copy/clear_page().
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:58 +09:00
Paul Mundt 0dcb957db5 sh: Build fixes for lib32 clear_page.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:56 +09:00
Paul Mundt 9895f9429c sh: clear/copy_page renames in lib and lib64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:54 +09:00
Paul Mundt 62d6b66edc sh: Move sh32 optimized I/O routines to arch/sh/lib/
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:41 +09:00
Paul Mundt 98366c20a2 sh: Add -Werror for clean directories.
Follow the MIPS and sparc64 changes for -Werror instrumentation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Paul Mundt 075fc19bde sh: Revert __xdiv64_32 size change.
It's only __div64_32 that needs the fix, __xdiv64_32 behaves as
expected with the original size.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-13 12:27:13 +09:00
Paul Mundt 04c7d9579f sh: Correct __xdiv64_32/div64_32 return value size.
These should be returning a uint32_t, whereas they were erroneously
returning a u64 before. As the register sizes are 32-bits, this doesn't
really make a lot of sense.

Reported-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-06 10:58:04 +09:00
kogiidena c71861e65e sh: Fixup ndelay() xloops calculation for alternate HZ.
Currently the xloops calculation in ndelay() gets set to 0 when
calculated with HZ=250, fix up how we do the HZ factoring in order
to get this right for differing values.

Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 01:35:02 +00:00
Paul Mundt cdf50b23bf sh: Kill off udivdi3 div64_32 wrapping.
Previously we've been handling udivdi3 references and wrapping
them in to div64_32() automatically. This doesn't get a lot of
use, however, and as akpm noted in the recent thread on l-k:

	http://lkml.org/lkml/2007/2/27/241

we're better off simply ripping it out and going the do_div()
route if there happen to be any places that need it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:55 +00:00
David S. Miller ded220bd8f [STRING]: Move strcasecmp/strncasecmp to lib/string.c
We have several platforms using local copies of identical
code.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:54:39 -07:00
Nobuhiro Iwamatsu c7afb7e5cb sh: Fix memcpy() build error on sh4eb.
A trivial bug breaking the build on sh4eb.

Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:50:03 +09:00
Ollie Wild 24ab54cb49 sh: Fix TCP payload csum bug in csum_partial_copy_generic().
There's a bug in the Hitachi SuperH csum_partial_copy_generic()
implementation.  If the supplied length is 1 (and several alignment
conditions are met), the function immediately branches to label 4.
However, the assembly at label 4 expects the length to be stored in
register r2.  Since this has not occurred, subsequent behavior is
undefined.

This can cause bad payload checksums in TCP connections.

I've fixed the problem by initializing register r2 prior to the branch
instruction.

Signed-off-by: Ollie Wild <aaw@rincewind.tv>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:46:24 +09:00
Toshinobu Sugioka e7be853df7 sh: Fix a sign extension bug in memset().
Minor sign-extension bug in SH-specific memset()..

Signed-off-by: Toshinobu Sugioka <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:13:14 +09:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Ingo Molnar 39c715b717 [PATCH] smp_processor_id() cleanup
This patch implements a number of smp_processor_id() cleanup ideas that
Arjan van de Ven and I came up with.

The previous __smp_processor_id/_smp_processor_id/smp_processor_id API
spaghetti was hard to follow both on the implementational and on the
usage side.

Some of the complexity arose from picking wrong names, some of the
complexity comes from the fact that not all architectures defined
__smp_processor_id.

In the new code, there are two externally visible symbols:

 - smp_processor_id(): debug variant.

 - raw_smp_processor_id(): nondebug variant. Replaces all existing
   uses of _smp_processor_id() and __smp_processor_id(). Defined
   by every SMP architecture in include/asm-*/smp.h.

There is one new internal symbol, dependent on DEBUG_PREEMPT:

 - debug_smp_processor_id(): internal debug variant, mapped to
                             smp_processor_id().

Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new
lib/smp_processor_id.c file.  All related comments got updated and/or
clarified.

I have build/boot tested the following 8 .config combinations on x86:

 {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT}

I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT.  (Other
architectures are untested, but should work just fine.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:13 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00