No point in going through loops and hoops instead of just comparing the
values.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
ktime is a union because the initial implementation stored the time in
scalar nanoseconds on 64 bit machine and in a endianess optimized timespec
variant for 32bit machines. The Y2038 cleanup removed the timespec variant
and switched everything to scalar nanoseconds. The union remained, but
become completely pointless.
Get rid of the union and just keep ktime_t as simple typedef of type s64.
The conversion was done with coccinelle and some manual mopping up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Instead of marking a device inactive, remove it from the cache entirely.
Flexfiles has a way to report errors back to the server, so we don't want
to stop devices from being tried again for 120 seconds.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The flexfiles client can piggyback both layout errors and layoutstats
as part of the layoutreturn. Both these payloads can get large, with
20 layout error entries taking up about 1.2K, and 4 layoutstats entries
taking up another 1K.
This patch allows a maximum payload of 4k by allocating a full page.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We encountered a deadlock where the SEQUENCE that accompanied the
LAYOUTGET triggered a session drain, while ff_layout_alloc_lseg
triggered a GETDEVICEINFO. The GETDEVICEINFO hung waiting for the
session drain, while the LAYOUTGET held the slot waiting for
alloc_lseg to finish.
Avoid this by moving the call to nfs4_find_get_deviceid out of
ff_layout_alloc_lseg and into nfs4_ff_layout_prepare_ds.
Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
[dros@primarydata.com: pNFS/flexfiles: fix races in ff_layout_mirror_valid]
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When we're merging an old entry into our new entry, we want to ensure that
we add the list entry in the correct place.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Add the layout error payload to the flexfiles layoutreturn private
data, and set up the encoding mechanisms. This is a refactoring in
preparation for adding the layout iostats payload.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If there have been no reads or writes to a given mirror since the last
layoutstats update, then don't resend the same data.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This parameter hasn't been used since f8407299 (Linux 3.11-rc2), so
let's remove it from this function and callers.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Both pnfs.c and the flexfiles code have their own versions of the
range intersection testing, and the "end_offset" helper.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We must not call nfs_pageio_init_read() on a new nfs_pageio_descriptor
while holding a reference to a layout segment, as that can deadlock
pnfs_update_layout().
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.0+
Allow the callers of nfs_remove_bad_delegation() to specify the stateid
that needs to be marked as bad.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the attempt to connect to a DS fails inside ff_layout_pg_init_read or
ff_layout_pg_init_write, then we currently end up clearing the layout
segment carried by the struct nfs_pageio_descriptor, causing an Oops
when we later call into ff_layout_read_pagelist/ff_layout_write_pagelist.
The fix is to ensure we return the layout and then retry.
Fixes: 446ca21953 ("pNFS/flexfiles: When initing reads or writes, we...")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Prior to this patch, the retrans value was set at 5, meaning that we
could see a maximum retransmission timeout value of more than 6 minutes.
That's a tad high for NFSv3 where the protocol does allow the server to
drop requests at any time.
Since this is a data channel, let's just set retrans to 0, and the default
timeout to 60s. The user can continue to adjust these defaults using the
dataserver_retrans and dataserver_timeo module parameters.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Putting the periodicity timer in the mirror instances is causing
non-scalable reporting behaviour and missed reporting intervals.
When you recall layouts and/or implement client side mirroring, it
leads to consecutive reports with only a few ms between RPC calls.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: d0379a5d06 ("pNFS/flexfiles: Support server-supplied...")
So ensure that we mark the layout for commit once the write is done,
and then ensure that the commit to ds is finished before sending
layoutcommit.
Note that by doing this, we're able to optimise away the commit
for the case of servers that don't need layoutcommit in order to
return updated attributes.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We should always do a layoutcommit after commit to DS, except if
the layout segment we're using has set FF_FLAGS_NO_LAYOUTCOMMIT.
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
As flexfiles has FF_FLAGS_NO_READ_IO, there is a need to generically
support enforcing that a IOMODE_RW segment will not allow READ I/O.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The mds can inform the client not to use the IOMODE_RW layout
segment for doing READs. I.e., it is basically a
IOMODE_WRITE layout segment.
It would do this to not interfere with the WRITEs.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Setting just the NFS_LAYOUT_RETURN_REQUESTED flag doesn't do anything,
unless there are lsegs that are also being marked for return. At the
point where that happens this flag is also set, so these set_bit calls
don't do anything useful.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Otherwise, we'll end up returning layouts that we've just received if
the client issues a new LAYOUTGET prior to the LAYOUTRETURN.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we are initializing reads or writes and can not connect to a DS, then
check whether or not IO is allowed through the MDS. If it is allowed,
reset to the MDS. Else, fail the layout segment and force a retry
of a new layout segment.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Whenever we check to see if we have the needed number of DSes for the
action, we may also have to check to see whether IO is allowed to go to
the MDS or not.
[jlayton: fix merge conflict due to lack of localio patches here]
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This patch fixes a problem whereby the pNFS client falls back to doing
reads and writes through the metadata server even when the layout flag
FF_FLAGS_NO_IO_THRU_MDS is set.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In order to more easily distinguish what kind of stateid we are dealing
with, introduce a type that can be used to label the stateid structure.
The label will be useful both for debugging, but also when dealing with
operations like SETATTR, READ and WRITE that can take several different
types of stateid as arguments.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A mirror can be shared between multiple layouts, even with different
iomodes. That makes stats gathering simpler, but it causes a problem
when we get different creds in READ vs. RW layouts.
The current code drops the newer credentials onto the floor when this
occurs. That's problematic when you fetch a READ layout first, and then
a RW. If the READ layout doesn't have the correct creds to do a write,
then writes will fail.
We could just overwrite the READ credentials with the RW ones, but that
would break the ability for the server to fence the layout for reads if
things go awry. We need to be able to revert to the earlier READ creds
if the RW layout is returned afterward.
The simplest fix is to just keep two sets of creds per mirror. One for
READ layouts and one for RW, and then use the appropriate set depending
on the iomode of the layout segment.
Also fix up some RCU nits that sparse found.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We're just as likely to have allocation problems here as we would if we
delay looking up the credential like we currently do. Fix the code to
get a rpc_cred reference early, as soon as the mirror is set up.
This allows us to eliminate the mirror early if there is a problem
getting an rpc credential. This also allows us to drop the uid/gid
from the layout_mirror struct as well.
In the event that we find an existing mirror where this one would go, we
swap in the new creds unconditionally, and drop the reference to the old
one.
Note that the old ff_layout_update_mirror_cred function wouldn't set
this pointer unless the DS version was 3, but we don't know what the DS
version is at this point. I'm a little unclear on why it did that as you
still need creds to talk to v4 servers as well. I have the code set
it regardless of the DS version here.
Also note the change to using generic creds instead of calling
lookup_cred directly. With that change, we also need to populate the
group_info pointer in the acred as some functions expect that to never
be NULL. Instead of allocating one every time however, we can allocate
one when the module is loaded and share it since the group_info is
refcounted.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In later patches, we're going to want to allow the creds to be updated
when we get a new layout with updated creds. Have this function take
a reference to the cred that is later put once the call has been
dispatched.
Also, prepare for this change by ensuring we follow RCU rules when
getting a reference to the cred as well.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
All the callers already call that function before calling into here,
so it ends up being a no-op anyway.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit ea2cf22 created nfs_commit_info and saved &inode->i_lock inside
this NFS specific structure. This obscures the usage of i_lock.
Instead, save struct inode * so later it's clear the spinlock taken is
i_lock.
Should be no functional change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
NFS_LAYOUT_RETURN_BEFORE_CLOSE is being used to signal that a
layoutreturn is needed, either due to a layout recall or to a
layout error. Rename it to NFS_LAYOUT_RETURN_REQUESTED in order
to clarify its purpose.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We must not skip encoding the statistics, or the server will see an
XDR encoding error.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # 4.0+
When we hit 22 errors, we start to overflow the memory buffers allocated
to the LAYOUTRETURN errors. The issue is that currently, RPC call reply
ordering determines how successful we are in merging errors that refer
to contiguous READ or WRITE requests.
Fix is to use an insertion sort to help detect contiguity.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
* bugfixes:
SUNRPC: Fixup socket wait for memory
SUNRPC: Fix a missing break in rpc_anyaddr()
pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()
NFS: Fix attribute cache revalidation
NFS: Ensure we revalidate attributes before using execute_ok()
NFS: Flush reclaim writes using FLUSH_COND_STABLE
NFS: Background flush should not be low priority
NFSv4.1/pnfs: Fixup an lo->plh_block_lgets imbalance in layoutreturn
NFSv4: Don't perform cached access checks before we've OPENed the file
NFS: Allow the combination pNFS and labeled NFS
NFS42: handle layoutstats stateid error
nfs: Fix race in __update_open_stateid()
nfs: fix missing assignment in nfs4_sequence_done tracepoint
* pnfs_generic:
NFSv4.1/pNFS: Cleanup constify struct pnfs_layout_range arguments
NFSv4.1/pnfs: Cleanup copying of pnfs_layout_range structures
NFSv4.1/pNFS: Cleanup pnfs_mark_matching_lsegs_invalid()
NFSv4.1/pNFS: Fix a race in initiate_file_draining()
NFSv4.1/pNFS: pnfs_error_mark_layout_for_return() must always return layout
NFSv4.1/pNFS: pnfs_mark_matching_lsegs_return() should set the iomode
NFSv4.1/pNFS: Use nfs4_stateid_copy for copying stateids
NFSv4.1/pNFS: Don't pass stateids by value to pnfs_send_layoutreturn()
NFS: Relax requirements in nfs_flush_incompatible
NFSv4.1/pNFS: Don't queue up a new commit if the layout segment is invalid
NFS: Allow multiple commit requests in flight per file
NFS/pNFS: Fix up pNFS write reschedule layering violations and bugs
NFSv4: List stateid information in the callback tracepoints
NFSv4.1/pNFS: Don't return NFS4ERR_DELAY unnecessarily in CB_LAYOUTRECALL
NFSv4.1/pNFS: Ensure we enforce RFC5661 Section 12.5.5.2.1
pNFS: If we have to delay the layout callback, mark the layout for return
NFSv4.1/pNFS: Add a helper to mark the layout as returned
pNFS: Ensure nfs4_layoutget_prepare returns the correct error
The flexfiles layout in particular, seems to want to poke around in the
O_DIRECT flags when retransmitting.
This patch sets up an interface to allow it to call back into O_DIRECT
to handle retransmission correctly. It also fixes a potential bug whereby
we could change the behaviour of O_DIRECT if an error is already pending.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Jeff reports seeing an Oops in ff_layout_alloc_lseg. Turns out
copy+paste has played cruel tricks on a nested loop.
Reported-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Currently, we will only record the layoutstats correctly if the
RPC call successfully obtains a slot. If we exit before that
happens, then we may find ourselves starting the busy timer through
the call in ff_layout_(read|write)_prepare_layoutstats, but never stopping it.
The same thing happens if we're doing DA-DS.
The fix is to ensure that we catch these cases in the rpc_release()
callback.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When we replay a failed read, write or commit to the dataserver, we
need to ensure that we call ff_layout_read_prepare_v3(),
ff_layout_write_prepare_v3 or ff_layout_commit_prepare_v3() so that we
reset the statistics.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fix a bug in which flexfiles clients are falling back to I/O through the
MDS even when the FF_FLAGS_NO_IO_THRU_MDS flag is set.
The flexfiles client will always report errors through the LAYOUTRETURN
and/or LAYOUTERROR mechanisms, so it should normally be safe for it
to retry the LAYOUTGET until it fails or succeeds.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If client ever restarts IO due to some errors, we'll endup
mis-counting IO stats if we do the counting in .rpc_done
callback. Move it to .rpc_count_stats callback that is only
called when releasing RPC.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We just need to delay and retry in these cases.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
For ERESTARTSYS/EIO/EROFS/ENOSPC/E2BIG in layoutget, we
should just bail out instead of hiding the error and
retrying inband IO.
Change all the call sites to pop the error all the way up.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Some servers want to be able to control the frequency with which clients
report layoutstats, for instance, in order to monitor QoS for a particular
file or set of file. In order to support this, the flexfiles layout allows
the server to pass this info as a hint in the layout payload.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
For loosely coupled pNFS/flexfiles systems, there is often no advantage
at all in going through the MDS for I/O, since the MDS is subject to
the same limitations as all other clients when talking to DSes. If a
DS is unresponsive, I/O through the MDS will fail.
For such systems, the only scalable solution is to have the pNFS clients
retry doing pNFS, and so the protocol now provides a flag that allows
the pNFS server to signal this.
If LAYOUTGET returns FF_FLAGS_NO_IO_THRU_MDS, then we should assume that
the MDS wants the client to retry using these devices, even if they were
previously marked as being unavailable. To do so, we add a helper,
ff_layout_mark_devices_valid() that will be called from layoutget.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the pNFS/flexfiles file is mirrored, and a read to one mirror fails,
then we should bump the mirror index, so that we retry to a different
mirror. Once we've iterated through all mirrors and all failed, we can
return the layout and issue a new LAYOUTGET.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When I/O cannot complete due to a fatal error on the DS, ensure that we
invalidate the corresponding layout segment and return it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If a read-write layout has an invalid mirror, then we should
mark it as invalid, and return it.
If a read-only layout has an invalid mirror, then mark it as invalid
and check if there is still at least one valid mirror before we return
it.
Note: Also fix incorrect use of pnfs_generic_mark_devid_invalid().
We really want nfs4_mark_deviceid_unavailable().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Unlike read layouts, the writeable layout cannot fall back to using only
one of the mirrors. It need to write to all of them.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Unlike the files layout, flexfiles does not test for the NFS_DEVICEID_INVALID
flag. Instead it relies on NFS_DEVICEID_UNAVAILABLE.
Fix is to replace with nfs4_mark_deviceid_unavailable().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Mirrors are now shared objects, so we should not be freeing them directly
inside ff_layout_free_lseg(). We should already be doing the right thing
in _ff_layout_free_lseg(), so just let it handle things.
Also ensure that ff_layout_free_mirror() frees the RPC credential if it
is set.
Fixes: 28a0d72c68 ("Add refcounting to struct nfs4_ff_layout_mirror")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the file was fenced and/or has been deleted on the DS, then we want
to retry pNFS after a layoutreturn with error report. If the server
cannot fix the problem, then we rely on it to tell us so in the
response to the LAYOUTGET.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
According to the flexfiles protocol, the layoutreturn should specify an
array of errors in the following format:
struct ff_ioerr4 {
offset4 ffie_offset;
length4 ffie_length;
stateid4 ffie_stateid;
device_error4 ffie_errors<>;
};
This patch fixes up the code to ensure that our ffie_errors is indeed
encoded as an array (albeit with only a single entry).
Reported-by: Tom Haynes <thomas.haynes@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In order to ensure atomicity of updates, we merge the old layout segments
into the new ones, and then invalidate the old ones.
Also ensure that we order the list of layout segments so that
RO segments are preferred over RW.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Allow advanced users to set the layoutstats timer in order to lengthen
or shorten the period between layoutstat transmissions to the server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Keep the full list of mirrors in the struct nfs4_ff_layout_mirror so that
they can be shared among the layout segments that use them.
Also ensure that we send out only one copy of the layoutstats per mirror.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We do want to share mirrors between layout segments, so add a refcount
to enable that.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We do not want to update inode attributes with DS values.
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Make sure that we also handle RPC level connection and protocol
negotiation errors.
Reported-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We want to ensure that the stopwatches for the busy timer and the
aggregate timer are consistent. This means that they need to use
the same start/stop times.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Otherwise we break fstest case tests/read_write/mctime.t
Does files layout need the same fix as well?
Cc: stable@vger.kernel.org # v4.0+
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We already know that pg_lseg is NULL here.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Turned out I misinterpreted the spec...
Cc: Tom Haynes <thomas.haynes@primarydata.com>
Reported-by: Jean Spector <jean@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
hdr->good_bytes needs to be set to the length of the request, not
zero.
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This patch ensures that we record the value of 'ffl_flags' from
the layout, and then checks for the presence of the
FF_FLAGS_NO_LAYOUTCOMMIT flag before deciding whether or not to
call pnfs_set_layoutcommit().
The effect is that servers now can decide whether or not they want
the client to call layoutcommit before returning a writeable layout.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
* layoutstats:
pnfs/flexfiles: protect ktime manipulation with mirror lock
nfs: provide pnfs_report_layoutstat when NFS42 is disabled
pnfs/flexfiles: report layoutstat regularly
nfs42: serialize LAYOUTSTATS calls of the same file
pnfs/flexfiles: encode LAYOUTSTATS flexfiles specific data
pnfs/flexfiles: add ff_layout_prepare_layoutstats
pNFS/flexfiles: track when layout is first used
pNFS/flexfiles: add layoutstats tracking
pNFS/flexfiles: Remove unused struct members user_name, group_name
pnfs: add pnfs_report_layoutstat helper function
pNFS: fill in nfs42_layoutstat_ops
NFSv.2/pnfs Add a LAYOUTSTATS rpc function
It looks as if xchg() and cmpxchg() are not available for 64-bit integers on sparc32:
> New breakage seen in linux-next today:
>
> ERROR: "__xchg_called_with_bad_pointer" [fs/nfs/flexfilelayout/nfs_layout_flexfiles.ko] undefined!
> ERROR: "__cmpxchg_called_with_bad_pointer" [fs/nfs/flexfilelayout/nfs_layout_flexfiles.ko] undefined!
> make[2]: *** [__modpost] Error 1
> make[1]: *** [modules] Error 2
Given that mirror ktime manipulation is already under mirror->lock, let's make use of the fact.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A ds can be associated with more than one mirror, but we currently skip
setting a mirror's credentials if we find that it's already set up with
a connected client.
The upshot is that we can end up sending DS writes with MDS credentials
instead of properly setting them up. Fix nfs4_ff_layout_prepare_ds to
always verify that the mirror's credentials are set up, even when we
have a DS that's already connected.
Reported-by: Tom Haynes <thomas.haynes@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we have two tasks racing to update a mirror's credentials, then they
can end up leaking one (or more) sets of credentials. The first task
will set mirror->cred and then the second task will just overwrite it.
Use a cmpxchg to ensure that the creds are only set once. If we get to
the point where we would set mirror->cred and find that they're already
set, then we just release the creds that were just found.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
As a simple scheme, report every minute if IO is still going on.
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It fills in the generic part of LAYOUTSTATS call. One thing to note
is that we don't really track if IO is continuous or not. So just fake
to use the completed bytes for it.
Still missing flexfiles specific part, which will be included in the next patch.
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
So that we can report cumulative time since the beginning
of statistics collection of the layout.
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This file is only used internally to the NFS v4 module, so it doesn't
need to be in the global include path. I also renamed it from
nfs_idmap.h to nfs4idmap.h to emphasize that it's an NFSv4-only include
file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The LAYOUTCOMMIT operation means different things to different layout types.
For blocks and objects, it is both a data and metadata consistency operation.
For files and flexfiles, it is only a metadata consistency operation.
This patch separates out the 2 cases, allowing the files/flexfiles layout
drivers to optimise away the data consistency calls to layoutcommit.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
pnfs_set_layoutcommit() and pnfs_commit_set_layoutcommit() are 100% identical
except for the function arguments. Refactor to eliminate the difference.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use of synchronize_rcu() when unmounting and potentially freeing a lot
of deviceids is problematic. There really is no reason why we can't just
use kfree_rcu() here.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The File Layout's filelayout_mark_request_commit() is almost the
Flex File Layout's ff_layout_mark_request_commit(). And that can
be reduced by calling into nfs_request_add_commit_list().
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull backing device changes from Jens Axboe:
"This contains a cleanup of how the backing device is handled, in
preparation for a rework of the life time rules. In this part, the
most important change is to split the unrelated nommu mmap flags from
it, but also removing a backing_dev_info pointer from the
address_space (and inode), and a cleanup of other various minor bits.
Christoph did all the work here, I just fixed an oops with pages that
have a swap backing. Arnd fixed a missing export, and Oleg killed the
lustre backing_dev_info from staging. Last patch was from Al,
unexporting parts that are now no longer needed outside"
* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
Make super_blocks and sb_lock static
mtd: export new mtd_mmap_capabilities
fs: make inode_to_bdi() handle NULL inode
staging/lustre/llite: get rid of backing_dev_info
fs: remove default_backing_dev_info
fs: don't reassign dirty inodes to default_backing_dev_info
nfs: don't call bdi_unregister
ceph: remove call to bdi_unregister
fs: remove mapping->backing_dev_info
fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
nilfs2: set up s_bdi like the generic mount_bdev code
block_dev: get bdev inode bdi directly from the block device
block_dev: only write bdev inode on close
fs: introduce f_op->mmap_capabilities for nommu mmap support
fs: kill BDI_CAP_SWAP_BACKED
fs: deduplicate noop_backing_dev_info
Found by 0-DAY kernel test infrastructure:
fs/nfs/flexfilelayout/flexfilelayoutdev.c:520:13-16: ERROR: reference preceded by free on line 518
fs/nfs/flexfilelayout/flexfilelayoutdev.c:520:26-29: ERROR: reference preceded by free on line 518
fs/nfs/flexfilelayout/flexfilelayoutdev.c:520:39-42: ERROR: reference preceded by free on line 518
fs/nfs/flexfilelayout/flexfilelayoutdev.c:521:3-6: ERROR: reference preceded by free on line 518
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The flexfile layout is a new layout that extends the
file layout. It is currently being drafted as a specification at
https://datatracker.ietf.org/doc/draft-ietf-nfsv4-layout-types/
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Tao Peng <bergwolf@primarydata.com>
Thomas Gleixner
Weston Andros Adamson
Trond Myklebust
Fred Isaman
Anna Schumaker
Tom Haynes
Jeff Layton
Tom Haynes
Dave Wysochanski
Peng Tao
kbuild test robot
Fabian Frederick
Linus Torvalds