Граф коммитов

2834 Коммитов

Автор SHA1 Сообщение Дата
Kirill A. Shutemov c2febafc67 mm: convert generic code to 5-level paging
Convert all non-architecture-specific code to 5-level paging.

It's mostly mechanical adding handling one more page table level in
places where we deal with pud_t.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 11:48:47 -08:00
Linus Torvalds 1827adb11a Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull sched.h split-up from Ingo Molnar:
 "The point of these changes is to significantly reduce the
  <linux/sched.h> header footprint, to speed up the kernel build and to
  have a cleaner header structure.

  After these changes the new <linux/sched.h>'s typical preprocessed
  size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K
  lines), which is around 40% faster to build on typical configs.

  Not much changed from the last version (-v2) posted three weeks ago: I
  eliminated quirks, backmerged fixes plus I rebased it to an upstream
  SHA1 from yesterday that includes most changes queued up in -next plus
  all sched.h changes that were pending from Andrew.

  I've re-tested the series both on x86 and on cross-arch defconfigs,
  and did a bisectability test at a number of random points.

  I tried to test as many build configurations as possible, but some
  build breakage is probably still left - but it should be mostly
  limited to architectures that have no cross-compiler binaries
  available on kernel.org, and non-default configurations"

* 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits)
  sched/headers: Clean up <linux/sched.h>
  sched/headers: Remove #ifdefs from <linux/sched.h>
  sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>
  sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>
  sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>
  sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>
  sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>
  sched/core: Remove unused prefetch_stack()
  sched/headers: Remove <linux/rculist.h> from <linux/sched.h>
  sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>
  sched/headers: Remove <linux/signal.h> from <linux/sched.h>
  sched/headers: Remove <linux/rwsem.h> from <linux/sched.h>
  sched/headers: Remove the runqueue_is_locked() prototype
  sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h>
  sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h>
  sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h>
  ...
2017-03-03 10:16:38 -08:00
Linus Torvalds 54d7989f47 virtio, vhost: optimizations, fixes
Looks like a quiet cycle for vhost/virtio, just a couple of minor
 tweaks. Most notable is automatic interrupt affinity for blk and scsi.
 Hopefully other devices are not far behind.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYt1rRAAoJECgfDbjSjVRpEZsIALSHevdXWtRHBZUb0ZkqPLQb
 /x2Vn49CcALS1p7iSuP9L027MPeaLKyr0NBT9hptBChp/4b9lnZWyyAo6vYQrzfx
 Ia/hLBYsK4ml6lEwbyfLwqkF2cmYCrZhBSVAILifn84lTPoN7CT0PlYDfA+OCaNR
 geo75qF8KR+AUO0aqchwMRL3RV3OxZKxQr2AR6LttCuhiBgnV3Xqxffg/M3x6ONM
 0ffFFdodm6slem3hIEiGUMwKj4NKQhcOleV+y0fVBzWfLQG9210pZbQyRBRikIL0
 7IsaarpaUr7OrLAZFMGF6nJnyRAaRrt6WknTHZkyvyggrePrGcmGgPm4jrODwY4=
 =2zwv
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull vhost updates from Michael Tsirkin:
 "virtio, vhost: optimizations, fixes

  Looks like a quiet cycle for vhost/virtio, just a couple of minor
  tweaks. Most notable is automatic interrupt affinity for blk and scsi.
  Hopefully other devices are not far behind"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio-console: avoid DMA from stack
  vhost: introduce O(1) vq metadata cache
  virtio_scsi: use virtio IRQ affinity
  virtio_blk: use virtio IRQ affinity
  blk-mq: provide a default queue mapping for virtio device
  virtio: provide a method to get the IRQ affinity mask for a virtqueue
  virtio: allow drivers to request IRQ affinity when creating VQs
  virtio_pci: simplify MSI-X setup
  virtio_pci: don't duplicate the msix_enable flag in struct pci_dev
  virtio_pci: use shared interrupts for virtqueues
  virtio_pci: remove struct virtio_pci_vq_info
  vhost: try avoiding avail index access when getting descriptor
  virtio_mmio: expose header to userspace
2017-03-02 13:53:13 -08:00
Ingo Molnar b69339ba10 sched/headers: Prepare to remove spurious <linux/sched.h> inclusion dependencies
In the following patches we are going to remove various headers
from sched.h and other headers that sched.h includes.

To make those patches build cleanly prepare the scene by adding
dependencies to various files that learned to rely on those
to-be-removed dependencies.

These changes all make sense standalone: they add a header for
a data type that a particular .c or .h file is using.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:41 +01:00
Ingo Molnar 0881e7bd34 sched/headers: Prepare to move the get_task_struct()/put_task_struct() and related APIs from <linux/sched.h> to <linux/sched/task.h>
But first update usage sites with the new header dependency.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:40 +01:00
Ingo Molnar b2d0910310 sched/headers: Prepare to use <linux/rcuupdate.h> instead of <linux/rculist.h> in <linux/sched.h>
We don't actually need the full rculist.h header in sched.h anymore,
we will be able to include the smaller rcupdate.h header instead.

But first update code that relied on the implicit header inclusion.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:38 +01:00
Ingo Molnar 68db0cf106 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h>
We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/task_stack.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:36 +01:00
Ingo Molnar 299300258d sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task.h>
We are going to split <linux/sched/task.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/task.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:35 +01:00
Ingo Molnar 174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Ingo Molnar 5b825c3af1 sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h>
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.

Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:31 +01:00
Ingo Molnar 3f07c01441 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:29 +01:00
Ingo Molnar 6e84f31522 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/mm.h>
We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/mm.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

The APIs that are going to be moved first are:

   mm_alloc()
   __mmdrop()
   mmdrop()
   mmdrop_async_fn()
   mmdrop_async()
   mmget_not_zero()
   mmput()
   mmput_async()
   get_task_mm()
   mm_access()
   mm_release()

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:28 +01:00
Ingo Molnar e601757102 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/clock.h>
We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which
will have to be picked up from other headers and .c files.

Create a trivial placeholder <linux/sched/clock.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:27 +01:00
Linus Torvalds b286cedd47 powerpc updates for 4.11 part 2
Highlights include:
 
  - An update of the disassembly code used by xmon to the latest versions in
    binutils. We've received permission from all the authors of the relevant
    binutils changes to relicense their changes to the relevant files from GPLv3
    to GPLv2, for inclusion in Linux. Thanks to Peter Bergner for doing the leg
    work to get permission from everyone.
 
  - Addition of the "architected" Power9 CPU table entry, allowing us to boot
    in Power9 architected mode under a hypervisor.
 
  - Updates to the Power9 PMU code.
 
  - Implementation of clear_bit_unlock_is_negative_byte() to optimise
    unlock_page().
 
  - Freescale updates from Scott: "Highlights include 8xx breakpoints and perf,
    t1042rdb display support, and board updates."
 
 Thanks to:
   Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas Miller,
   Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan, Michael Roth, Nathan
   Fontenot, Naveen N. Rao, Nicholas Piggin, Peter Bergner, Paul E. McKenney,
   Rashmica Gupta, Russell Currey, Sahil Mehta, Stewart Smith.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYthsKAAoJEFHr6jzI4aWAaWMQAJ7mAwX98ncoYschPgRmmIun
 f6DtE4IonrxiZ22gp1ct4+c9OFtA+B5FXMcEhOKpfh93lg38PTDjHs9e5kfauD7+
 oTQ2Bg1eXaL48FKdmC5Vs4Kt+/J8e9guGafUC1OVIpTyyRPoZeUDH0lx+kSPV5bd
 PkL+wY/k3W0Njo8WgD1P9u3W15+BxISo/k8c7ajzKTHGBZlAvj5h2gO6XUBNMLyy
 YClB/qIymjZriSB+AeWYD79k8gPbBZPsmZG0ZF1hY060894LgqLB9mPOJdffx/DY
 H7/uP6jcsRDOXTOmyueW1SEmPoQbtysiMd1lNrCXKtC/Okr5uhn2cUhi88AsgWvd
 1QFly2lobcDAKPah/yB7YQGMAcmYvGGNuqrWaosaV2T7r0KprzUYYgCOqzvC3WSJ
 QtVatBzMIqRTMYq+3U4G1aHeCXlRazVQHDuvPby8RdR5b2gIexiqMab2eS7tSMIH
 mCOIunRIvT14g/7wxUV7tahN+ifncNxzAk4DvPO+Wc4FQ4sy7wArv2YipSaWRWtE
 u7tNdBkEwlDkKhJgRU5T0Op2PyMbHwCP8pWuz7PQIhKIcgwmP9wb07BIWG/GGIqn
 07TxJYX2ItabyEMZMsYhzILZqjLyiAaCARANB7ScbQbdP8wdcGZcwismhwnfROIU
 NuxsZg63BUDMoxk7Sauu
 =rspd
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull more powerpc updates from Michael Ellerman:
 "Highlights include:

   - an update of the disassembly code used by xmon to the latest
     versions in binutils. We've received permission from all the
     authors of the relevant binutils changes to relicense their changes
     to the relevant files from GPLv3 to GPLv2, for inclusion in Linux.
     Thanks to Peter Bergner for doing the leg work to get permission
     from everyone.

   - addition of the "architected" Power9 CPU table entry, allowing us
     to boot in Power9 architected mode under a hypervisor.

   - updates to the Power9 PMU code.

   - implementation of clear_bit_unlock_is_negative_byte() to optimise
     unlock_page().

   - Freescale updates from Scott: "Highlights include 8xx breakpoints
     and perf, t1042rdb display support, and board updates."

  Thanks to:
    Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas
    Miller, Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan,
    Michael Roth, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Peter
    Bergner, Paul E. McKenney, Rashmica Gupta, Russell Currey, Sahil
    Mehta, Stewart Smith"

* tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits)
  powerpc: Remove leftover cputime_to_nsecs call causing build error
  powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU
  powerpc/optprobes: Fix TOC handling in optprobes trampoline
  powerpc/pseries: Advertise Hot Plug Event support to firmware
  cxl: fix nested locking hang during EEH hotplug
  powerpc/xmon: Dump memory in CPU endian format
  powerpc/pseries: Revert 'Auto-online hotplugged memory'
  powerpc/powernv: Make PCI non-optional
  powerpc/64: Implement clear_bit_unlock_is_negative_byte()
  powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable()
  powerpc/kernel: Remove error message in pcibios_setup_phb_resources()
  powerpc/mm: Fix typo in set_pte_at()
  pci/hotplug/pnv-php: Disable MSI and PCI device properly
  pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts
  pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot()
  powerpc: Add POWER9 architected mode to cputable
  powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags()
  powerpc/perf: Avoid FAB_*_MATCH checks for power9
  powerpc/perf: Add restrictions to PMC5 in power9 DD1
  powerpc/perf: Use Instruction Counter value
  ...
2017-03-01 10:10:16 -08:00
Alexey Dobriyan 5b5e0928f7 lib/vsprintf.c: remove %Z support
Now that %z is standartised in C99 there is no reason to support %Z.
Unlike %L it doesn't even make format strings smaller.

Use BUILD_BUG_ON in a couple ATM drivers.

In case anyone didn't notice lib/vsprintf.o is about half of SLUB which
is in my opinion is quite an achievement.  Hopefully this patch inspires
someone else to trim vsprintf.c more.

Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Masahiro Yamada 3f8b6fb7f2 scripts/spelling.txt: add "comsume(r)" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  comsume||consume
  comsumer||consumer
  comsuming||consuming

I see some variable names with this pattern, but this commit is only
touching comment blocks to avoid unexpected impact.

Link: http://lkml.kernel.org/r/1481573103-11329-19-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Christoph Hellwig fb5e31d970 virtio: allow drivers to request IRQ affinity when creating VQs
Add a struct irq_affinity pointer to the find_vqs methods, which if set
is used to tell the PCI layer to create the MSI-X vectors for our I/O
virtqueues with the proper affinity from the start.  Compared to after
the fact affinity hints this gives us an instantly working setup and
allows to allocate the irq descritors node-local and avoid interconnect
traffic.  Last but not least this will allow blk-mq queues are created
based on the interrupt affinity for storage drivers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-27 20:54:04 +02:00
Linus Torvalds 7067739df2 Merge branch 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "I2C has for you two new drivers (Tegra BPMP and STM32F4), interrupt
  support for pca954x muxes, and a bunch of driver bugfixes and
  improvements. Nothing really special this cycle.

  A few commits have been added to my tree just recently. Those are the
  Tegra BPMP driver and a few straightforward bugfixes or cleanups which
  I prefer to have upstream rather soonish. The rest had proper
  linux-next exposure"

* 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (25 commits)
  i2c: thunderx: Replace pci_enable_msix()
  i2c: exynos5: fix arbitration lost handling
  i2c: exynos5: disable fifo-almost-empty irq signal when necessary
  i2c: at91: ensure state is restored after suspending
  i2c: bcm2835: Avoid possible NULL ptr dereference
  i2c: Add Tegra BPMP I2C proxy driver
  dt-bindings: Add Tegra186 BPMP I2C binding
  misc: eeprom: at24: use device_property_*() functions instead of of_get_property()
  i2c: mux: pca954x: Add interrupt controller support
  dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller
  i2c: mux: pca954x: Add missing pca9542 definition to chip_desc
  i2c: riic: correctly finish transfers
  i2c: i801: Add support for Intel Gemini Lake
  i2c: mux: pca9541: Export OF device ID table as module aliases
  i2c: mux: pca954x: Export OF device ID table as module aliases
  i2c: mux: mlxcpld: remove unused including <linux/version.h>
  i2c: busses: constify i2c_algorithm structures
  i2c: i2c-mux-gpio: rename i2c-gpio-mux to i2c-mux-gpio
  i2c: sh_mobile: document support for r8a7796 (R-Car M3-W)
  i2c: i2c-cros-ec-tunnel: Reduce logging noise
  ...
2017-02-25 14:21:18 -08:00
Linus Torvalds ac1820fb28 This is a tree wide change and has been kept separate for that reason.
Bart Van Assche noted that the ib DMA mapping code was significantly
 similar enough to the core DMA mapping code that with a few changes
 it was possible to remove the IB DMA mapping code entirely and
 switch the RDMA stack to use the core DMA mapping code.  This resulted
 in a nice set of cleanups, but touched the entire tree.  This branch
 will be submitted separately to Linus at the end of the merge window
 as per normal practice for tree wide changes like this.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYo06oAAoJELgmozMOVy/d9Z8QALedWHdu98St1L0u2c8sxnR9
 2zo/4sF5Vb9u7FpmdIX32L4SQ9s9KhPE8Qp8NtZLf9v10zlDebIRJDpXknXtKooV
 CAXxX4sxBXV27/UrhbZEfXiPrmm6ccJFyIfRnMU6NlMqh2AtAsRa5AC2/RMp8oUD
 Med97PFiF0o6TD22/UH1VFbRpX1zjaKyqm7a3as5sJfzNA+UGIZAQ7Euz8000DKZ
 xCgVLTEwS0FmOujtBkCst7xa9TjuqR1HLOB4DdGvAhP6BHdz2yamM7Qmh9NN+NEX
 0BtjsuXomtn6j6AszGC+bpipCZh3NUigcwoFAARXCYFHibBvo4DPdFeGsraFgXdy
 1+KyR8CCeQG3Aly5Vwr264RFPGkGpwMj8PsBlXgQVtrlg4rriaCzOJNmIIbfdADw
 ftqhxBOzReZw77aH2s+9p2ILRfcAmPqhynLvFGFo9LBvsik8LVso7YgZN0xGxwcI
 IjI/XGC8UskPVsIZBIYA6sl2bYzgOjtBIHiXjRrPlW3uhduIXLrvKFfLPP/5XLAG
 ehLXK+J0bfsyY9ClmlNS8oH/WdLhXAyy/KNmnj5bRRm9qg6BRJR3bsOBhZJODuoC
 XgEXFfF6/7roNESWxowff7pK0rTkRg/m/Pa4VQpeO+6NWHE7kgZhL6kyIp5nKcwS
 3e7mgpcwC+3XfA/6vU3F
 =e0Si
 -----END PGP SIGNATURE-----

Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma DMA mapping updates from Doug Ledford:
 "Drop IB DMA mapping code and use core DMA code instead.

  Bart Van Assche noted that the ib DMA mapping code was significantly
  similar enough to the core DMA mapping code that with a few changes it
  was possible to remove the IB DMA mapping code entirely and switch the
  RDMA stack to use the core DMA mapping code.

  This resulted in a nice set of cleanups, but touched the entire tree
  and has been kept separate for that reason."

* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
  IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
  IB/core: Remove ib_device.dma_device
  nvme-rdma: Switch from dma_device to dev.parent
  RDS: net: Switch from dma_device to dev.parent
  IB/srpt: Modify a debug statement
  IB/srp: Switch from dma_device to dev.parent
  IB/iser: Switch from dma_device to dev.parent
  IB/IPoIB: Switch from dma_device to dev.parent
  IB/rxe: Switch from dma_device to dev.parent
  IB/vmw_pvrdma: Switch from dma_device to dev.parent
  IB/usnic: Switch from dma_device to dev.parent
  IB/qib: Switch from dma_device to dev.parent
  IB/qedr: Switch from dma_device to dev.parent
  IB/ocrdma: Switch from dma_device to dev.parent
  IB/nes: Remove a superfluous assignment statement
  IB/mthca: Switch from dma_device to dev.parent
  IB/mlx5: Switch from dma_device to dev.parent
  IB/mlx4: Switch from dma_device to dev.parent
  IB/i40iw: Remove a superfluous assignment statement
  IB/hns: Switch from dma_device to dev.parent
  ...
2017-02-25 13:45:43 -08:00
Dave Jiang 11bac80004 mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmf
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.

Remove the vma parameter to simplify things.

[arnd@arndb.de: fix ARM build]
  Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:54 -08:00
Linus Torvalds 28cbc335d2 sound updates for 4.11-rc1
here is the update of sound bits for 4.11: again at this time, no big
 changes in ALSA and ASoC core but only cosmetic changes like
 consitifaction.  Meanwhile, quite a lot of developments are seen in
 a few driver side.
 
 ALSA Core:
 - Clean up, consitification of some ops
 
 HD-audio:
 - A slight behavior change of single_cmd option
 - Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221 HP,
   and fixes for Lewisburg controller
 - Realtek ALC299, ALC1220 codecs
 
 Others:
 - USB-audio: Tascam US-16x08 DSP mixer quirk
 - Intel HDMI LPE audio support for Baytrail / Cherrytrail; this
   contains some updates in drm/i915 for the new platform binding
 
 ASoC:
 - Lots of updates in Intel drivers, mostly for DisplayPort and HDMI
   on Skylake and onwards, as well as more Baytrail / Cherrytrail
   boards support
 - Channel mapping support for HDMI
 - Support for AllWinner A31 and A33, Everest Semiconductor ES8328,
   Nuvoton NAU8540.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAlivCQkOHHRpd2FpQHN1
 c2UuZGUACgkQbDGAVD0pKaTA9xAAgMpLZ7K7vBRlPKQAObPLf7ufciA5gDj+L6Lt
 5octKSAql5uuqU06nHyQd5BLXYmGj5Qe7+/fkfWJYNeOwUkHroi/G44DbGNIEG8s
 sXXStcEkOKdZw30G/fzMoDgoggqjWy6gAFgtSjhPkHwfnbmF1nFmeUJ9/so7y/Oc
 Q0l4Pdsg5t4fTZcejZyLHBLdFJ2EhsYWVoJpa1Wqrv2eChMvKq1s59i0EW0Gyw4u
 kHe/COcbMIHf0yZKEcxlsN6BsAe7ik7/mGZYozL05+9HfaOIdJfU7oqJmQyPV2hm
 BVDHVmhi9rMTJ//9WA4lOa8wwpojumoM2AMbzQGczBmGjQU1KguI2rS5FhGipz4c
 mYpAnEESpB19//pKdEK8oBNPldfZyCuyTOBFVAPFp8TpHvaJEoNOyEg1UAn1crpE
 f77OMok6/6DuOcapr76TxSHwg2ewWjsxRi8NrOUML/1uxaKTplSP1AsXBLCExQi1
 YnHn4H0wZOlOfX/jfodBDW0n6+V8kyZuv/jXMEqBWsIVIHk5UUAlDJ9AR+5K3D9e
 pRDRRww7480byY5h2aXBJbI8JjePuYwhJQxbYfsz55QU5rvTBcQAAfN11wXmWGol
 wSKvDyYgR/Zw1c93+HLcNv9+Ff6Wl9sIJFXwufzYOo3hKIrVUbXHeV8GT0io39zv
 IwJoaTI=
 =1cdN
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Here is the update of sound bits for 4.11: again at this time, no big
  changes in ALSA and ASoC core but only cosmetic changes like
  consitifaction.

  Meanwhile, quite a lot of developments are seen in a few driver side.

  ALSA Core:
   - Clean up, consitification of some ops

  HD-audio:
   - A slight behavior change of single_cmd option
   - Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221
     HP, and fixes for Lewisburg controller
   - Realtek ALC299, ALC1220 codecs

  Others:
   - USB-audio: Tascam US-16x08 DSP mixer quirk
   - Intel HDMI LPE audio support for Baytrail / Cherrytrail; this
     contains some updates in drm/i915 for the new platform binding

  ASoC:
   - Lots of updates in Intel drivers, mostly for DisplayPort and HDMI
     on Skylake and onwards, as well as more Baytrail / Cherrytrail
     boards support
   - Channel mapping support for HDMI
   - Support for AllWinner A31 and A33, Everest Semiconductor ES8328,
     Nuvoton NAU8540.

* tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (323 commits)
  ALSA: usb-audio: Tidy up mixer_us16x08.c
  ALSA: usb-audio: Fix memory leak and corruption in mixer_us16x08.c
  ALSA: usb-audio: purge needless variable length array
  ALSA: x86: hdmi: select CONFIG_SND_PCM
  ALSA: x86: Don't enable runtime PM as default
  ALSA: x86: Use runtime PM autosuspend
  ALSA: usb-audio: localize function without external linkage
  ALSA: usb-audio: localize one-referrer variable
  ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk
  ALSA: emu10k1: constify snd_emux_operators structure
  ASoC: sun4i-spdif: drop unnessary snd_soc_unregister_component()
  ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machine
  ASoC: nau8825: automatic BCLK and LRC divde in master mode
  ASoC: hdac_hdmi: Add device id for Geminilake
  ASoC: Intel: Skylake: Add Geminlake IDs
  ASoC: rt298: Add DMI match for Geminilake reference platform
  ASoC: Intel: Skylake: Check device type to get endpoint configuration
  ASoC: Intel: bxt: Add jack port initialize in da7219_max98357a machine
  ASoC: Intel: Skylake: Add jack port initialize in nau88l25_ssm4567 machine
  ASoC: Intel: Skylake: Add jack port initialize in nau88l25_max98357a machine
  ...
2017-02-23 08:50:22 -08:00
Linus Torvalds e30aee9e10 char/misc driver patches for 4.11-rc1
Here is the big char/misc driver patchset for 4.11-rc1.
 
 Lots of different driver subsystems updated here.  Rework for the hyperv
 subsystem to handle new platforms better, mei and w1 and extcon driver
 updates, as well as a number of other "minor" driver updates.  Full
 details are in the shortlog below.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2iRQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynhFACguVE+/ixj5u5bT5DXQaZNai/6zIAAmgMWwd/t
 YTD2cwsJsGbTT1fY3SUe
 =CiSI
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver patchset for 4.11-rc1.

  Lots of different driver subsystems updated here: rework for the
  hyperv subsystem to handle new platforms better, mei and w1 and extcon
  driver updates, as well as a number of other "minor" driver updates.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
  goldfish: Sanitize the broken interrupt handler
  x86/platform/goldfish: Prevent unconditional loading
  vmbus: replace modulus operation with subtraction
  vmbus: constify parameters where possible
  vmbus: expose hv_begin/end_read
  vmbus: remove conditional locking of vmbus_write
  vmbus: add direct isr callback mode
  vmbus: change to per channel tasklet
  vmbus: put related per-cpu variable together
  vmbus: callback is in softirq not workqueue
  binder: Add support for file-descriptor arrays
  binder: Add support for scatter-gather
  binder: Add extra size to allocator
  binder: Refactor binder_transact()
  binder: Support multiple /dev instances
  binder: Deal with contexts in debugfs
  binder: Support multiple context managers
  binder: Split flat_binder_object
  auxdisplay: ht16k33: remove private workqueue
  auxdisplay: ht16k33: rework input device initialization
  ...
2017-02-22 11:38:22 -08:00
Linus Torvalds 38705613b7 powerpc updates for 4.11 part 1.
Highlights include:
 
  - Support for direct mapped LPC on POWER9, giving Linux direct access to
    devices that may be on there such as a UART.
 
  - Memory hotplug support for the Power9 Radix MMU.
 
  - Add new AUX vectors describing the processor's cache geometry, to be used by
    glibc.
 
  - The ability for a guest to ask the hypervisor to resize the guest's hash
    table, and in addition support for doing so automatically when memory is
    hotplugged into/out-of the guest. This allows the hash table to be sized
    based on the current memory usage of the guest, rather than the maximum
    possible memory usage.
 
  - Implementation of optprobes (kprobe optimisation) for powerpc.
 
 In addition there's the topic branch shared with the KVM tree, which includes
 support for guests to use the Radix MMU on Power9.
 
 Thanks to:
   Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T, Anton Blanchard,
   Benjamin Herrenschmidt, Chris Packham, Daniel Axtens, Daniel Borkmann, David
   Gibson, Finn Thain, Gautham R. Shenoy, Gavin Shan, Greg Kurz, Joel Stanley,
   John Allen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael
   Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Ravi
   Bangoria, Reza Arbab, Shailendra Singh, Vaibhav Jain, Wei Yongjun.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrWj0AAoJEFHr6jzI4aWAsn4P/08Kz3TtOvDuuPGVNoO7fWOn
 ag5/zVt8R4FuCALqWpAZbVqMuUU4wLxG0RuWlmBNYYhrjMC6JxHpOSjQXxM2D7YT
 CdGTJxG414r6HMOeToL9i/z33o0m+KT07tscer+QMKlXVKCR2z0fEJch+zoPBHYA
 5eVBFpLLTtbNiX9UnrcM/vYz61d56kT4YJey9/8qbAkTAc1rMPa8ucU5UiKYJ7yX
 mF8cd7WE+7aqif9V8yN59G2rcbz+h3pbMw/gzImiYsYrUj4fLjU+VTKL5PPT+UFy
 WWBXD3MAMm1dksMMZi3hgoo2BZhDn3RkymeYi6Jo4kDknNMPZzkMxGyvaJ8Eq5H/
 bIYXdS1AbTtvaaEEuWqDFjpnChOEvj/8IeqitU0jjlql8BVjNKg/ESaaKucZr+pO
 pk2Mfvw0Tb/lxJT5qj27yq4aRsxJwdFOoPYCN7MquPp/wV2Tg5M6h4nVQ4T6Wl0S
 tMFQeCqXflhDWh0Xgr2UXpF66/YTj3Du5LasOTkgGeU30Z8TcNGFEmDWShKP3cEm
 e0oQE+OHhIGN4WSBXBAto/Gw8/0v3pXlMs+VEfeHqenwPss2sWtSwXWe8khmiy9e
 DJ48sTzj75/Zx1fiqRldw9YEnrL+NK0eOOpvzxeyKpfvdUytc+chFfEqUmO6kl3Z
 DW2UmlZxmW+b0SfexCHL
 =Icle
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Support for direct mapped LPC on POWER9, giving Linux direct access
     to devices that may be on there such as a UART.

   - Memory hotplug support for the Power9 Radix MMU.

   - Add new AUX vectors describing the processor's cache geometry, to
     be used by glibc.

   - The ability for a guest to ask the hypervisor to resize the guest's
     hash table, and in addition support for doing so automatically when
     memory is hotplugged into/out-of the guest. This allows the hash
     table to be sized based on the current memory usage of the guest,
     rather than the maximum possible memory usage.

   - Implementation of optprobes (kprobe optimisation) for powerpc.

  In addition there's the topic branch shared with the KVM tree, which
  includes support for guests to use the Radix MMU on Power9.

  Thanks to:
    Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T, Anton
    Blanchard, Benjamin Herrenschmidt, Chris Packham, Daniel Axtens,
    Daniel Borkmann, David Gibson, Finn Thain, Gautham R. Shenoy, Gavin
    Shan, Greg Kurz, Joel Stanley, John Allen, Madhavan Srinivasan,
    Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Nathan Fontenot,
    Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Reza
    Arbab, Shailendra Singh, Vaibhav Jain, Wei Yongjun"

* tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (129 commits)
  powerpc/mm/radix: Skip ptesync in pte update helpers
  powerpc/mm/radix: Use ptep_get_and_clear_full when clearing pte for full mm
  powerpc/mm/radix: Update pte update sequence for pte clear case
  powerpc/mm: Update PROTFAULT handling in the page fault path
  powerpc/xmon: Fix data-breakpoint
  powerpc/mm: Fix build break with BOOK3S_64=n and MEMORY_HOTPLUG=y
  powerpc/mm: Fix build break when CMA=n && SPAPR_TCE_IOMMU=y
  powerpc/mm: Fix build break with RADIX=y & HUGETLBFS=n
  powerpc/pseries: Fix typo in parameter description
  powerpc/kprobes: Remove kprobe_exceptions_notify()
  kprobes: Introduce weak variant of kprobe_exceptions_notify()
  powerpc/ftrace: Fix confusing help text for DISABLE_MPROFILE_KERNEL
  powerpc/powernv: Fix opal_exit tracepoint opcode
  powerpc: Add a prototype for mcount() so it can be versioned
  powerpc: Drop GPL from of_node_to_nid() export to match other arches
  powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()
  powerpc/kprobes: Implement Optprobes
  powerpc/kprobes: Fixes for kprobe_lookup_name() on BE
  powerpc: Add helper to check if offset is within relative branch range
  powerpc/bpf: Introduce __PPC_SH64()
  ...
2017-02-22 10:30:38 -08:00
Andrew Donnellan 171ed0fcd8 cxl: fix nested locking hang during EEH hotplug
Commit 14a3ae34bf ("cxl: Prevent read/write to AFU config space while AFU
not configured") introduced a rwsem to fix an invalid memory access that
occurred when someone attempts to access the config space of an AFU on a
vPHB whilst the AFU is deconfigured, such as during EEH recovery.

It turns out that it's possible to run into a nested locking issue when EEH
recovery fails and a full device hotplug is required.
cxl_pci_error_detected() deconfigures the AFU, taking a writer lock on
configured_rwsem. When EEH recovery fails, the EEH code calls
pci_hp_remove_devices() to remove the device, which in turn calls
cxl_remove() -> cxl_pci_remove_afu() -> pci_deconfigure_afu(), which tries
to grab the writer lock that's already held.

Standard rwsem semantics don't express what we really want to do here and
don't allow for nested locking. Fix this by replacing the rwsem with an
atomic_t which we can control more finely. Allow the AFU to be locked
multiple times so long as there are no readers.

Fixes: 14a3ae34bf ("cxl: Prevent read/write to AFU config space while AFU not configured")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-21 21:32:52 +11:00
Linus Torvalds 42e1b14b6e Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Implement wraparound-safe refcount_t and kref_t types based on
     generic atomic primitives (Peter Zijlstra)

   - Improve and fix the ww_mutex code (Nicolai Hähnle)

   - Add self-tests to the ww_mutex code (Chris Wilson)

   - Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr
     Bueso)

   - Micro-optimize the current-task logic all around the core kernel
     (Davidlohr Bueso)

   - Tidy up after recent optimizations: remove stale code and APIs,
     clean up the code (Waiman Long)

   - ... plus misc fixes, updates and cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
  fork: Fix task_struct alignment
  locking/spinlock/debug: Remove spinlock lockup detection code
  lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS
  lkdtm: Convert to refcount_t testing
  kref: Implement 'struct kref' using refcount_t
  refcount_t: Introduce a special purpose refcount type
  sched/wake_q: Clarify queue reinit comment
  sched/wait, rcuwait: Fix typo in comment
  locking/mutex: Fix lockdep_assert_held() fail
  locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock()
  locking/rwsem: Reinit wake_q after use
  locking/rwsem: Remove unnecessary atomic_long_t casts
  jump_labels: Move header guard #endif down where it belongs
  locking/atomic, kref: Implement kref_put_lock()
  locking/ww_mutex: Turn off __must_check for now
  locking/atomic, kref: Avoid more abuse
  locking/atomic, kref: Use kref_get_unless_zero() more
  locking/atomic, kref: Kill kref_sub()
  locking/atomic, kref: Add kref_read()
  locking/atomic, kref: Add KREF_INIT()
  ...
2017-02-20 13:23:30 -08:00
Mark Brown a701802c4e Merge remote-tracking branches 'asoc/topic/max9867', 'asoc/topic/mtk', 'asoc/topic/nau8540', 'asoc/topic/nau8825' and 'asoc/topic/omap' into asoc-next 2017-02-19 16:36:35 +00:00
Mark Brown b7707a8be6 Merge remote-tracking branches 'asoc/topic/atmel', 'asoc/topic/chmap', 'asoc/topic/cq93vc' and 'asoc/topic/da7218' into asoc-next 2017-02-19 16:36:13 +00:00
Ben Gardner dd905a61e9 misc: eeprom: at24: use device_property_*() functions instead of of_get_property()
Allow the at24 driver to get configuration information from both OF and
ACPI by using the more generic device_property functions.
This change was inspired by the at25.c driver.

I have a custom board with a ST M24C02 EEPROM attached to an I2C bus.
With the following ACPI construct, this patch instantiates a working
instance of the driver.

Device (EEP0) {
 Name (_HID, "PRP0001")
 Name (_DSD, Package () {
  ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
  Package () {
   Package () {"compatible", Package () {"st,24c02"}},
   Package () {"pagesize", 16},
  },
 })
 Name (_CRS, ResourceTemplate () {
  I2cSerialBus (
   0x0057, ControllerInitiated, 400000,
   AddressingMode7Bit, "\\_SB.PCI0.I2C3", 0x00,
   ResourceConsumer,,)
 })
}

Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-11 21:23:43 +01:00
Geert Uytterhoeven fda4ae1819 misc: panel: Abstract temporary backlight handling
Currently the periodic scan timer is used for three purposes,
entangling keypad and display handling, which are both optional:
  1. Scanning the keypad,
  2. Flashing the backlight when a key is pressed,
  3. Disabling temporary backlighting after a fixed period of time.

Abstract the second purpose using a new lcd_poke() function.
Make the non-periodic temporary backlight handling independent from
keypad handling by converting it to a delayed workqueue.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:34:02 +01:00
Geert Uytterhoeven 204a4f6d67 misc: panel: Add lcd_home() helper
Add a helper function to move the cursor to the home position, so
callers no longer need access to internal state.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:32:53 +01:00
Geert Uytterhoeven 3f77b43965 misc: panel: Remove always-true check from panel_detach()
panel_detach() already verified that pptr is a valid pointer.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:32:53 +01:00
Geert Uytterhoeven 9db3cf1ccd misc: panel: Move all suboptions into a big if section
All 18 suboptions related to the panel driver have individual
dependencies on PANEL.

Replace them by a single "if PANEL / endif # PANEL" section for easier
dependency management.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:32:53 +01:00
Geert Uytterhoeven 731fcec469 misc: panel: Remove reference to misc device support
As of commit 7c5763b845 ("drivers: misc: Remove MISC_DEVICES
config option"), misc device support no longer needs to be enabled
manually.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:32:53 +01:00
Geert Uytterhoeven e28fa714aa misc: panel: Remove unused LCD_FLAG_S and LCD_FLAG_ID
These definitions were never used in any publicly available version
since (at least) 2004.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:32:53 +01:00
Geert Uytterhoeven 30f468b2ea misc: panel: Remove PANEL_VERSION
Hardcoded driver versions are so pre-git.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:32:53 +01:00
Geert Uytterhoeven 84a1ed0407 misc: panel: Fix LCD_FLAG_F/LCD_FLAG_N exchange
LCD_FLAG_F is the font flag, LCD_FLAG_N is the two-lines flag.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:32:53 +01:00
Alexander Usyskin cb97fbbcac mei: remove support for broken parallel read
Parallel reads from multiple threads on a file descriptor
are not well defined and racy. It is safer to return to original
behavior and simply fail the additional read.
The solution is to remove request for next read credit.

Cc: <stable@vger.kernel.org> #4.9
Fixes: ff1586a7ea ("mei: enqueue consecutive reads")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:20:44 +01:00
Kees Cook ff86b30010 lkdtm: Convert to refcount_t testing
Since we'll be using refcount_t instead of atomic_t for refcounting,
change the LKDTM tests to reflect the new interface and test conditions.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: dhowells@redhat.com
Cc: dwindsor@gmail.com
Cc: elena.reshetova@intel.com
Cc: gregkh@linuxfoundation.org
Cc: h.peter.anvin@intel.com
Cc: kernel-hardening@lists.openwall.com
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1486164412-7338-3-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-10 09:04:20 +01:00
Andrew Donnellan 39d4087152 cxl: Fix build when CONFIG_DEBUG_FS=n
Stub out the debugfs functions so that the build doesn't break when
CONFIG_DEBUG_FS=n.

Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-03 21:59:26 +11:00
Alexander Usyskin 47f60a0171 mei: me: generate an interrupt if the hw indicates reset.
In rare case the driver may lose connection with the device after device
reset due to a missed interrupt. The driver will unlock the flow by
generating an interrupt towards the firmware (HIG) when the device is in
the resetting state. The FW is able to ignore the interrupt during
orderly flow. The effected platforms are skylake and newer.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03 11:49:06 +01:00
Alexander Usyskin 9c7daa61d9 mei: me: add a wrapper to set host generated data interrupt
Consolidate setting H_IG, an interrupt from host towards hw,
into a wrapper to eliminate code duplication.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03 11:49:06 +01:00
Miguel Bernal Marin e1ef962bf1 misc: fix typo on Kconfig
When panel driver was moved from staging to misc a new line was missing
to be added on Kconfig file.

Fixes: 305b37bd01 ("misc: Move panel driver out of staging")

Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03 11:49:06 +01:00
Christoph Hellwig 3bb434cdcc vmw_vmci: switch to pci_irq_alloc_vectors
Cleans up the IRQ management code a lot, including removing a lot of
state from the per-device structure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03 11:49:06 +01:00
Tomas Winkler f8a096059f mei: simplify error handling via devres function.
Use devm_ and pcim_ functions to make error handling
simpler and code smaller and tidier.

Based on original patch by
mei: me: use managed functions pcim_* and devm_*
https://lkml.org/lkml/2016/2/1/339

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31 11:08:18 +01:00
Tomas Winkler f046192d98 mei: revamp io list cleanup function.
Specify in function names by which object is the io list filtered:
cl for a client and fp for file descriptor.
In that course a code duplication is resolved by dropping
mei_cl_read_cb_flush and mei_clear_list and using
mei_io_list_free_fp function.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31 11:07:43 +01:00
Alexander Usyskin 962ff7bcec mei: replace callback structures used as list head by list_head
mei_dev structure used struct mei_cl_cb type variables as for holding
callbacks list heads.  Replace them by the actual struct list_head
as there is no other info that is handled. This slims down
the mei_dev structure and mostly streamline the code.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31 11:07:43 +01:00
Tomas Winkler 9ecdbc58f9 mei: amthif: allow the read completion after close
The amthif client connection is shared over multiple file descriptors.
In case a file descriptor was closed immediately after a write, the read
credits should be still available so the pending reads can be cleaned
from the queue, hence we cannot drop the control read list, this is
done only upon connection close.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31 11:07:43 +01:00
Tomas Winkler 6537ae2f20 mei: amthif: clean command queue upon disconnection
In order to prevent memory leak clean up the amthif command
queue upon disconnection. The issue may happen only on error path
as the command queue is cleaned upon file descriptor close.
And remove the cleanup from mei_cl_flush_queues as this code
is never reached for amthif client.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31 11:07:43 +01:00
Alexander Usyskin 6c0d6701a5 mei: abort waiting for notification on unsupported HW
On legacy HW, pre Skylake, the notifications are not supported,
return -EOPNOTSUPP in mei_cl_notify_get and prevent
waiting indefinitely.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31 11:07:43 +01:00
Alexander Usyskin 7c47d2ca0f mei: return error on notification request to a disconnected client
Request for a notification from a disconnected client will be ignored
silently by the FW but the caller should know that the operation hasn't
succeeded.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31 11:07:43 +01:00