Pull kconfig updates from Michal Marek:
- dependency solver fix for make defconfig
- randconfig fixes, one of which had to be reverted again
- more user-friendly sorting of search results
- hex and range keywords support longs
- fix for [mn]conf not to rely on particular behavior of the LINES and
COLS variables
- cleanup of magic constants in kconfig/lxdialog
- [mn]conf formatting fixes
- fix for scripts/config's help text in out-of-tree usage (under a
different name)
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: allow "hex" and "range" to support longs
Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG
kconfig: loop as long as we changed some symbols in randconfig
kconfig/[mn]conf: make it explicit in the search box that a regexp is possible
kconfig: sort found symbols by relevance
kconfig/conf: print the seed used to initialise the RNG for randconfig
kconfig/conf: accept a base-16 seed for randconfig
kconfig/conf: fix randconfig setting multiple symbols in a choice
scripts/config: replace hard-coded script name by a dynamic value
mconf/nconf: mark empty menus/menuconfigs different from non-empty ones
nconf: use function calls instead of ncurses' variables LINES and COLS
mconf: use function calls instead of ncurses' variables LINES and COLS
kconfig/lxdialog: handle newline characters in print_autowrap()
kconfig/lxdialog: Use new mininimum resize definitions in conf_choice()
kconfig/lxdialog: Add definitions for mininimum (re)size values
kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on
The script `config' prints its name in usage() function. It is currently
hard-coded to value `config'. However, the script may be reused under
a different name in contexts other than the Linux Kernel.
Replace the hard-coded value `config' by the name of the script at runtime.
Signed-off-by: Clement Chauplannaz <chauplac@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When --*-after options are used, two parameters are parsed from the
command-line before the adequate function is called:
- the `before' option, after which the new option will be inserted,
- the name of the option to enable/disable/modularise.
With the short version of --*-after options (namely -E, -D, -M), the
parsing step is not performed which leads to processing unset variables.
Add options -E, -D, -M to the test that triggers assignment of parameters
for --*-after options.
Signed-off-by: Clement Chauplannaz <chauplac@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Remove wrong "shift" for --keep-case. There is always "shift" at
beginning of while-loop. No need "shift" at --keep-case just before
"continue" to process next argument.
Now the following works as expected:
./scripts/config -e aAa -k -e bBb -e cCc && tail -3 .config
CONFIG_AAA=y
CONFIG_bBb=y
CONFIG_cCc=y
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull misc kbuild changes from Michal Marek:
"This is the non-critical part of kbuild for v3.6-rc1:
- Two new coccinelle semantic patches
- New scripts/tags.sh regexp
- scripts/config improvements that I mistakenly applied here instead
of in the kconfig branch (but there are no conflicts)
- Debian packaging fixes"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/tags.sh: Teach [ce]tags about libtraceeevent error codes
scripts/coccinelle: list iterator variable semantic patch
scripts/coccinelle: Find threaded IRQs requests which are missing IRQF_ONESHOT
deb-pkg: Add all Makefiles to header package
deb-pkg: Install linux-firmware-image in versioned dir
scripts/config: add option to undef a symbol
scripts/config: allow alternate prefix to config option symbol
scripts/config: add option to not upper-case symbols
When reporting a string value, only the first double-quote was
un-escaped. We need to un-escape all escaped double-quotes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
It is currently possible to enable, disable or modularise
a symbol. Also, an undefined symbol is reported as such.
Add a new command to undefine a symbol, by removing the
corresponding line from the .config file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
While the Linux kernel uses 'CONFIG_' as a prefix to the config options
symbols, many projects that use kconfig may use different prefixes, or
even none at all.
If the CONFIG_ environment variable is set, use it as the prefix (empty
is a valid prefix). Otherwise, use the default prefix 'CONFIG_'.
This matches the support for alternate prefixes in scripts/kconfig/lkc.h,
which uses the same logic (albeit with a C define instead of an environment
variable).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, scripts/config mangles the config option symbols to always
be upper-case.
While the Linux kernel almost exclusively uses upper-case symbols, there
are still a few symbols with lower-case which this script can not handle:
$ grep -r -E '^[[:space:]]*config[[:space:]]+[^[:space:]]*[[:lower:]][^[:space:]=.]*$' . |wc -l
173
(that's roughly 1.3% of the symbols in 3.5-rc1)
Eg.:
./arch/arm/Kconfig:config VFPv3
./arch/powerpc/platforms/Kconfig.cputype:config 40x
./arch/x86/Kconfig:config SCx200HR_TIMER
./drivers/video/console/Kconfig:config FONT_8x8
./drivers/video/Kconfig:config NTSC_640x480
Also, other projects that use kconfig may allow for lower- or mixed-case
symbols, and may find easier to reuse this script than implement each
their own (potentially flawed) logic. For such a use-case, see:
http://marc.info/?l=linux-kbuild&m=133409932115848&w=2
This patch adds a new option to keep the given case, and keep the current
default to upper-case the symbols.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, scripts/config removes the leading double-quote from
string options, but leaves the trailing double-quote.
Also, double-quotes in a string are escaped, but scripts/config
does not unescape those when printing
Finally, scripts/config does not escape double-quotes when setting
string options.
Eg. the current behavior:
$ grep -E '^CONFIG_FOO=' .config
CONFIG_FOO="Bar \"Buz\" Meh"
$ ./scripts/config -s FOO
Bar \"Buz\" Meh"
$ ./scripts/config --set-str FOO 'Alpha "Bravo" Charlie'
$ grep -E '^CONFIG_FOO=' .config
CONFIG_FOO="Alpha "Bravo" Charlie"
Fix those three, giving this new behavior:
$ grep -E '^CONFIG_FOO=' .config
CONFIG_FOO="Bar \"Buz\" Meh"
$ ./scripts/config -s FOO
Bar "Buz" Meh
$ ./scripts/config --set-str FOO 'Alpha "Bravo" Charlie'
$ grep -E '^CONFIG_FOO=' .config
CONFIG_FOO="Alpha \"Bravo\" Charlie"
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Add new option to scripts/config for changing .config numeric values
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The one letter commands in scripts/config didn't work and always
printed usage. Fix this here.
Cc: erick@openchill.org
Reported-by: erick@openchill.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
If an option does not exist in .config, set it at the end of the file.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
I often change single options in .config files. Instead of using
an editor or one of the frontends it's convenient to do this from
the command line. It's also useful to do from automated build scripts
when building different variants from a base config file.
I extracted most of the CONFIG manipulation code from one of my
build scripts into a new shell script scripts/config
The script is not integrated with the normal Kconfig machinery
and doesn't do any checking against Kconfig files, but just manipulates
that text format. This is always done at make time anyways.
I believe this script would be a useful standard addition for scripts/*
Sample usage:
./scripts/config --disable smp
Disable SMP in .config file
./scripts/config --file otherdir/.config --module e1000e
Enable E1000E as module in otherdir/.config
./scripts/config --state smp
y
Check state of config option CONFIG_SMP
After merging into git please make scripts/config executable
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Linus Torvalds
Clement Chauplannaz
Hiroshi Doyu
Yann E. MORIN
Jonas Aaberg
Andi Kleen
Michal Marek
Andi Kleen