Add a couple of functions to allow changing the default
domain type from architecture code and a function for iommu
drivers to request whether the default domain is
passthrough.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To allow IOMMU drivers to batch up TLB flushing operations and postpone
them until ->iotlb_sync() is called, extend the prototypes for the
->unmap() and ->iotlb_sync() IOMMU ops callbacks to take a pointer to
the current iommu_iotlb_gather structure.
All affected IOMMU drivers are updated, but there should be no
functional change since the extra parameter is ignored for now.
Signed-off-by: Will Deacon <will@kernel.org>
Introduce a helper function for drivers to use when updating an
iommu_iotlb_gather structure in response to an ->unmap() call, rather
than having to open-code the logic in every page-table implementation.
Signed-off-by: Will Deacon <will@kernel.org>
To permit batching of TLB flushes across multiple calls to the IOMMU
driver's ->unmap() implementation, introduce a new structure for
tracking the address range to be flushed and the granularity at which
the flushing is required.
This is hooked into the IOMMU API and its caller are updated to make use
of the new structure. Subsequent patches will plumb this into the IOMMU
drivers as well, but for now the gathering information is ignored.
Signed-off-by: Will Deacon <will@kernel.org>
Commit add02cfdc9 ("iommu: Introduce Interface for IOMMU TLB Flushing")
added three new TLB flushing operations to the IOMMU API so that the
underlying driver operations can be batched when unmapping large regions
of IO virtual address space.
However, the ->iotlb_range_add() callback has not been implemented by
any IOMMU drivers (amd_iommu.c implements it as an empty function, which
incurs the overhead of an indirect branch). Instead, drivers either flush
the entire IOTLB in the ->iotlb_sync() callback or perform the necessary
invalidation during ->unmap().
Attempting to implement ->iotlb_range_add() for arm-smmu-v3.c revealed
two major issues:
1. The page size used to map the region in the page-table is not known,
and so it is not generally possible to issue TLB flushes in the most
efficient manner.
2. The only mutable state passed to the callback is a pointer to the
iommu_domain, which can be accessed concurrently and therefore
requires expensive synchronisation to keep track of the outstanding
flushes.
Remove the callback entirely in preparation for extending ->unmap() and
->iotlb_sync() to update a token on the caller's stack.
Signed-off-by: Will Deacon <will@kernel.org>
Few Qualcomm platforms such as, sdm845 have an additional outer
cache called as System cache, aka. Last level cache (LLC) that
allows non-coherent devices to upgrade to using caching.
This cache sits right before the DDR, and is tightly coupled
with the memory controller. The clients using this cache request
their slices from this system cache, make it active, and can then
start using it.
There is a fundamental assumption that non-coherent devices can't
access caches. This change adds an exception where they *can* use
some level of cache despite still being non-coherent overall.
The coherent devices that use cacheable memory, and CPU make use of
this system cache by default.
Looking at memory types, we have following -
a) Normal uncached :- MAIR 0x44, inner non-cacheable,
outer non-cacheable;
b) Normal cached :- MAIR 0xff, inner read write-back non-transient,
outer read write-back non-transient;
attribute setting for coherenet I/O devices.
and, for non-coherent i/o devices that can allocate in system cache
another type gets added -
c) Normal sys-cached :- MAIR 0xf4, inner non-cacheable,
outer read write-back non-transient
Coherent I/O devices use system cache by marking the memory as
normal cached.
Non-coherent I/O devices should mark the memory as normal
sys-cached in page tables to use system cache.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Introduce a new type for reserved region. This corresponds
to directly mapped regions which are known to be relaxable
in some specific conditions, such as device assignment use
case. Well known examples are those used by USB controllers
providing PS/2 keyboard emulation for pre-boot BIOS and
early BOOT or RMRRs associated to IGD working in legacy mode.
Since commit c875d2c1b8 ("iommu/vt-d: Exclude devices using RMRRs
from IOMMU API domains") and commit 18436afdc1 ("iommu/vt-d: Allow
RMRR on graphics devices too"), those regions are currently
considered "safe" with respect to device assignment use case
which requires a non direct mapping at IOMMU physical level
(RAM GPA -> HPA mapping).
Those RMRRs currently exist and sometimes the device is
attempting to access it but this has not been considered
an issue until now.
However at the moment, iommu_get_group_resv_regions() is
not able to make any difference between directly mapped
regions: those which must be absolutely enforced and those
like above ones which are known as relaxable.
This is a blocker for reporting severe conflicts between
non relaxable RMRRs (like MSI doorbells) and guest GPA space.
With this new reserved region type we will be able to use
iommu_get_group_resv_regions() to enumerate the IOVA space
that is usable through the IOMMU API without introducing
regressions with respect to existing device assignment
use cases (USB and IGD).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some IOMMU hardware features, for example PCI PRI and Arm SMMU Stall,
enable recoverable I/O page faults. Allow IOMMU drivers to report PRI Page
Requests and Stall events through the new fault reporting API. The
consumer of the fault can be either an I/O page fault handler in the host,
or a guest OS.
Once handled, the fault must be completed by sending a page response back
to the IOMMU. Add an iommu_page_response() function to complete a page
fault.
There are two ways to extend the userspace API:
* Add a field to iommu_page_response and a flag to
iommu_page_response::flags describing the validity of this field.
* Introduce a new iommu_page_response_X structure with a different version
number. The kernel must then support both versions.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Traditionally, device specific faults are detected and handled within
their own device drivers. When IOMMU is enabled, faults such as DMA
related transactions are detected by IOMMU. There is no generic
reporting mechanism to report faults back to the in-kernel device
driver or the guest OS in case of assigned devices.
This patch introduces a registration API for device specific fault
handlers. This differs from the existing iommu_set_fault_handler/
report_iommu_fault infrastructures in several ways:
- it allows to report more sophisticated fault events (both
unrecoverable faults and page request faults) due to the nature
of the iommu_fault struct
- it is device specific and not domain specific.
The current iommu_report_device_fault() implementation only handles
the "shoot and forget" unrecoverable fault case. Handling of page
request faults or stalled faults will come later.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Device faults detected by IOMMU can be reported outside the IOMMU
subsystem for further processing. This patch introduces
a generic device fault data structure.
The fault can be either an unrecoverable fault or a page request,
also referred to as a recoverable fault.
We only care about non internal faults that are likely to be reported
to an external subsystem.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 136 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Normally during iommu probing a device, a default doamin will
be allocated and attached to the device. The domain type of
the default domain is statically defined, which results in a
situation where the allocated default domain isn't suitable
for the device due to some limitations. We already have API
iommu_request_dm_for_dev() to replace a DMA domain with an
identity one. This adds iommu_request_dma_domain_for_dev()
to request a dma domain if an allocated identity domain isn't
suitable for the device in question.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Root complex node in IORT has a bit telling whether it supports ATS or
not. Store this bit in the IOMMU fwspec when setting up a device, so it
can be accessed later by an IOMMU driver. In the future we'll probably
want to store this bit at the host bridge or SMMU rather than in each
endpoint.
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add bind() and unbind() operations to the IOMMU API.
iommu_sva_bind_device() binds a device to an mm, and returns a handle to
the bond, which is released by calling iommu_sva_unbind_device().
Each mm bound to devices gets a PASID (by convention, a 20-bit system-wide
ID representing the address space), which can be retrieved with
iommu_sva_get_pasid(). When programming DMA addresses, device drivers
include this PASID in a device-specific manner, to let the device access
the given address space. Since the process memory may be paged out, device
and IOMMU must support I/O page faults (e.g. PCI PRI).
Using iommu_sva_set_ops(), device drivers provide an mm_exit() callback
that is called by the IOMMU driver if the process exits before the device
driver called unbind(). In mm_exit(), device driver should disable DMA
from the given context, so that the core IOMMU can reallocate the PASID.
Whether the process exited or nor, the device driver should always release
the handle with unbind().
To use these functions, device driver must first enable the
IOMMU_DEV_FEAT_SVA device feature with iommu_dev_enable_feature().
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Sharing a physical PCI device in a finer-granularity way
is becoming a consensus in the industry. IOMMU vendors
are also engaging efforts to support such sharing as well
as possible. Among the efforts, the capability of support
finer-granularity DMA isolation is a common requirement
due to the security consideration. With finer-granularity
DMA isolation, subsets of a PCI function can be isolated
from each others by the IOMMU. As a result, there is a
request in software to attach multiple domains to a physical
PCI device. One example of such use model is the Intel
Scalable IOV [1] [2]. The Intel vt-d 3.0 spec [3] introduces
the scalable mode which enables PASID granularity DMA
isolation.
This adds the APIs to support multiple domains per device.
In order to ease the discussions, we call it 'a domain in
auxiliary mode' or simply 'auxiliary domain' when multiple
domains are attached to a physical device.
The APIs include:
* iommu_dev_has_feature(dev, IOMMU_DEV_FEAT_AUX)
- Detect both IOMMU and PCI endpoint devices supporting
the feature (aux-domain here) without the host driver
dependency.
* iommu_dev_feature_enabled(dev, IOMMU_DEV_FEAT_AUX)
- Check the enabling status of the feature (aux-domain
here). The aux-domain interfaces are available only
if this returns true.
* iommu_dev_enable/disable_feature(dev, IOMMU_DEV_FEAT_AUX)
- Enable/disable device specific aux-domain feature.
* iommu_aux_attach_device(domain, dev)
- Attaches @domain to @dev in the auxiliary mode. Multiple
domains could be attached to a single device in the
auxiliary mode with each domain representing an isolated
address space for an assignable subset of the device.
* iommu_aux_detach_device(domain, dev)
- Detach @domain which has been attached to @dev in the
auxiliary mode.
* iommu_aux_get_pasid(domain, dev)
- Return ID used for finer-granularity DMA translation.
For the Intel Scalable IOV usage model, this will be
a PASID. The device which supports Scalable IOV needs
to write this ID to the device register so that DMA
requests could be tagged with a right PASID prefix.
This has been updated with the latest proposal from Joerg
posted here [5].
Many people involved in discussions of this design.
Kevin Tian <kevin.tian@intel.com>
Liu Yi L <yi.l.liu@intel.com>
Ashok Raj <ashok.raj@intel.com>
Sanjay Kumar <sanjay.k.kumar@intel.com>
Jacob Pan <jacob.jun.pan@linux.intel.com>
Alex Williamson <alex.williamson@redhat.com>
Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Joerg Roedel <joro@8bytes.org>
and some discussions can be found here [4] [5].
[1] https://software.intel.com/en-us/download/intel-scalable-io-virtualization-technical-specification
[2] https://schd.ws/hosted_files/lc32018/00/LC3-SIOV-final.pdf
[3] https://software.intel.com/en-us/download/intel-virtualization-technology-for-directed-io-architecture-specification
[4] https://lkml.org/lkml/2018/7/26/4
[5] https://www.spinics.net/lists/iommu/msg31874.html
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Suggested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce iotlb_sync_map() callback that is invoked in the end of
iommu_map(). This new callback allows IOMMU drivers to avoid syncing
after mapping of each contiguous chunk and sync only when the whole
mapping is completed, optimizing performance of the mapping operation.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These wrappers will be used to easily change the location of
the field later when all users are converted.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With the flush queue infrastructure already abstracted into IOVA
domains, hooking it up in iommu-dma is pretty simple. Since there is a
degree of dependency on the IOMMU driver knowing what to do to play
along, we key the whole thing off a domain attribute which will be set
on default DMA ops domains to request non-strict invalidation. That way,
drivers can indicate the appropriate support by acknowledging the
attribute, and we can easily fall back to strict invalidation otherwise.
The flush queue callback needs a handle on the iommu_domain which owns
our cookie, so we have to add a pointer back to that, but neatly, that's
also sufficient to indicate whether we're using a flush queue or not,
and thus which way to release IOVAs. The only slight subtlety is
switching __iommu_dma_unmap() from calling iommu_unmap() to explicit
iommu_unmap_fast()/iommu_tlb_sync() so that we can elide the sync
entirely in non-strict mode.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[rm: convert to domain attribute, tweak comments and commit message]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Since these are trivially handled by the .domain_{get,set}_attr
callbacks when relevant, we can streamline struct iommu_ops for
everyone.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
While iommu_get_domain_for_dev() is the robust way for arbitrary IOMMU
API callers to retrieve the domain pointer, for DMA ops domains it
doesn't scale well for large systems and multi-queue devices, since the
momentary refcount adjustment will lead to exclusive cacheline contention
when multiple CPUs are operating in parallel on different mappings for
the same device.
In the case of DMA ops domains, however, this refcounting is actually
unnecessary, since they already imply that the group exists and is
managed by platform code and IOMMU internals (by virtue of
iommu_group_get_for_dev()) such that a reference will already be held
for the lifetime of the device. Thus we can avoid the bottleneck by
providing a fast lookup specifically for the DMA code to retrieve the
default domain it already knows it has set up - a simple read-only
dereference plays much nicer with cache-coherency protocols.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement bus specific support for the fsl-mc bus including
registering arm_smmu_ops and bus specific device add operations.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All iommu drivers use the default_iommu_map_sg implementation, and there
is no good reason to ever override it. Just expose it as iommu_map_sg
directly and remove the indirection, specially in our post-spectre world
where indirect calls are horribly expensive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Provide base enablement for using debugfs to expose internal data of an
IOMMU driver. When called, create the /sys/kernel/debug/iommu directory.
Emit a strong warning at boot time to indicate that this feature is
enabled.
This function is called from iommu_init, and creates the initial DebugFS
directory. Drivers may then call iommu_debugfs_new_driver_dir() to
instantiate a device-specific directory to expose internal data.
It will return a pointer to the new dentry structure created in
/sys/kernel/debug/iommu, or NULL in the event of a failure.
Since the IOMMU driver can not be removed from the running system, there
is no need for an "off" function.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, iommu_unmap, iommu_unmap_fast and iommu_map_sg return
size_t. However, some of the return values are error codes (< 0),
which can be misinterpreted as large size. Therefore, returning size 0
instead to signify failure to map/unmap.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The definition of map_sg was split during a recent addition to iommu_ops.
Put it back together.
Fixes: add02cfdc9 ("iommu: Introduce Interface for IOMMU TLB Flushing")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With the current IOMMU-API the hardware TLBs have to be
flushed in every iommu_ops->unmap() call-back.
For unmapping large amounts of address space, like it
happens when a KVM domain with assigned devices is
destroyed, this causes thousands of unnecessary TLB flushes
in the IOMMU hardware because the unmap call-back runs for
every unmapped physical page.
With the TLB Flush Interface and the new iommu_unmap_fast()
function introduced here the need to clean the hardware TLBs
is removed from the unmapping code-path. Users of
iommu_unmap_fast() have to explicitly call the TLB-Flush
functions to sync the page-table changes to the hardware.
Three functions for TLB-Flushes are introduced:
* iommu_flush_tlb_all() - Flushes all TLB entries
associated with that
domain. TLBs entries are
flushed when this function
returns.
* iommu_tlb_range_add() - This will add a given
range to the flush queue
for this domain.
* iommu_tlb_sync() - Flushes all queued ranges from
the hardware TLBs. Returns when
the flush is finished.
The semantic of this interface is intentionally similar to
the iommu_gather_ops from the io-pgtable code.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This new call-back will be used to check if the domain attach need be
deferred for now. If yes, the domain attach/detach will return directly.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The struct iommu_device has a 'struct device' embedded into
it, not as a pointer, but the whole struct. In the
conversion of the iommu drivers to use struct iommu_device
it was forgotten that the relase function for that struct
device simply calls kfree() on the pointer.
This frees memory that was never allocated and causes memory
corruption.
To fix this issue, use a pointer to struct device instead of
embedding the whole struct. This needs some updates in the
iommu sysfs code as well as the Intel VT-d and AMD IOMMU
driver.
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Fixes: 39ab9555c2 ('iommu: Add sysfs bindings for struct iommu_device')
Cc: stable@vger.kernel.org # >= v4.11
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 7d3002cc8c ("iommu/core: split mapping to page sizes as supported
by the hardware") replaced 'int gfp_order' with a 'size_t size' of
iommu_map / iommu_unmap function arguments, but missed the function
prototypes for the disabled CONFIG_IOMMU_API case, let's correct them
for consistency.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function is in no fast-path, there is no need for it to
be static inline in a header file. This also removes the
need to include iommu trace-points in iommu.h.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We make use of 'struct device' in iommu.h, so include
device.h to make it available explicitly.
Re-order the other headers while at it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is a fairly subtle thing - let's make sure it's described as
clearly as possible to avoid potential misunderstandings.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The introduction of reserved regions has left a couple of rough edges
which we could do with sorting out sooner rather than later. Since we
are not yet addressing the potential dynamic aspect of software-managed
reservations and presenting them at arbitrary fixed addresses, it is
incongruous that we end up displaying hardware vs. software-managed MSI
regions to userspace differently, especially since ARM-based systems may
actually require one or the other, or even potentially both at once,
(which iommu-dma currently has no hope of dealing with at all). Let's
resolve the former user-visible inconsistency ASAP before the ABI has
been baked into a kernel release, in a way that also lays the groundwork
for the latter shortcoming to be addressed by follow-up patches.
For clarity, rename the software-managed type to IOMMU_RESV_SW_MSI, use
IOMMU_RESV_MSI to describe the hardware type, and document everything a
little bit. Since the x86 MSI remapping hardware falls squarely under
this meaning of IOMMU_RESV_MSI, apply that type to their regions as well,
so that we tell the same story to userspace across all platforms.
Secondly, as the various region types require quite different handling,
and it really makes little sense to ever try combining them, convert the
bitfield-esque #defines to a plain enum in the process before anyone
gets the wrong impression.
Fixes: d30ddcaa7b ("iommu: Add a new type field in iommu_resv_region")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: David Woodhouse <dwmw2@infradead.org>
CC: kvm@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
And also move its remaining functionality to
iommu_device_register() and 'struct iommu_device'.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Joerg Roedel
Will Deacon
Vivek Gautam
Eric Auger
Jean-Philippe Brucker
Jacob Pan
Thomas Gleixner
Lu Baolu
Geert Uytterhoeven
Tom Murphy
Dmitry Osipenko
Zhen Lei
Robin Murphy
Nipun Gupta
Christoph Hellwig
Gary R Hook
Suravee Suthikulpanit
Baoquan He