that needs for a successful mount through SMB2 protocol.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
and add negotiate request type to let set_credits know that
we are only on negotiate stage and no need to make a decision
about disabling echos and oplocks.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Use SMB2 header size values for allocation and memset because they
are bigger and suitable for both CIFS and SMB2.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Now we can process SMB2 messages: check message, get message id
and wakeup awaiting routines.
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Commit 30d9049474 caused a regression
in cifs open codepath.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
For SMB2 protocol we can add more than one credit for one received
request: it depends on CreditRequest field in SMB2 response header.
Also we divide all requests by type: echoes, oplocks and others.
Each type uses its own slot pull.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Add mapping table for 32 bit SMB2 status codes to linux errors.
Note that SMB2 does not use DOS/OS2 errors (ever) so mapping to
DOS/OS2 errors as a common network subset (as we do for cifs)
doesn't help. And note that the set of status codes is much more
complete here.
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
and consider such codes as CIFS errors.
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
and rename variables around the code changes.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Split all requests to echos, oplocks and others - each group uses
its own credit slot. This is indicated by new flags
CIFS_ECHO_OP and CIFS_OBREAK_OP
that are not used now for CIFS. This change is required to support
SMB2 protocol because of different processing of these commands.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
sec=ntlmv2 as a mount option got dropped in the mount option overhaul.
Cc: Sachin Prabhu <sprabhu@redhat.com>
Cc: <stable@vger.kernel.org> # 3.4+
Reported-by: Günter Kukkukk <linux@kukkukk.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
"smb2" makes me think of the SMB2.x protocol, which isn't at all what
this function is for...
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
There's a comment here about how we don't want to modify this length,
but nothing in this function actually does.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
struct file_lock is pretty large, so we really don't want that on the
stack in a potentially long call chain. Reorganize the arguments to
CIFSSMBPosixLock to eliminate the need for that.
Eliminate the get_flag and simply use a non-NULL pLockInfo to indicate
that this is a "get" operation. In order to do that, need to add a new
loff_t argument for the start_offset.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Those macros add a newline on their own, so there's not any need to
embed one in the message itself.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Calling key_revoke here isn't ideal as further requests for the key will
end up returning -EKEYREVOKED until it gets purged from the cache. What we
really intend here is to force a new upcall on the next request_key.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The only checks of the long argument passed to fcntl(fd,F_SETLEASE,.)
are done after converting the long to an int. Thus some illegal values
may be let through and cause problems in later code.
[ They actually *don't* cause problems in mainline, as of Dave Jones's
commit 8d657eb3b4 "Remove easily user-triggerable BUG from
generic_setlease", but we should fix this anyway. And this patch will
be necessary to fix real bugs on earlier kernels. ]
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull the big VFS changes from Al Viro:
"This one is *big* and changes quite a few things around VFS. What's in there:
- the first of two really major architecture changes - death to open
intents.
The former is finally there; it was very long in making, but with
Miklos getting through really hard and messy final push in
fs/namei.c, we finally have it. Unlike his variant, this one
doesn't introduce struct opendata; what we have instead is
->atomic_open() taking preallocated struct file * and passing
everything via its fields.
Instead of returning struct file *, it returns -E... on error, 0
on success and 1 in "deal with it yourself" case (e.g. symlink
found on server, etc.).
See comments before fs/namei.c:atomic_open(). That made a lot of
goodies finally possible and quite a few are in that pile:
->lookup(), ->d_revalidate() and ->create() do not get struct
nameidata * anymore; ->lookup() and ->d_revalidate() get lookup
flags instead, ->create() gets "do we want it exclusive" flag.
With the introduction of new helper (kern_path_locked()) we are rid
of all struct nameidata instances outside of fs/namei.c; it's still
visible in namei.h, but not for long. Come the next cycle,
declaration will move either to fs/internal.h or to fs/namei.c
itself. [me, miklos, hch]
- The second major change: behaviour of final fput(). Now we have
__fput() done without any locks held by caller *and* not from deep
in call stack.
That obviously lifts a lot of constraints on the locking in there.
Moreover, it's legal now to call fput() from atomic contexts (which
has immediately simplified life for aio.c). We also don't need
anti-recursion logics in __scm_destroy() anymore.
There is a price, though - the damn thing has become partially
asynchronous. For fput() from normal process we are guaranteed
that pending __fput() will be done before the caller returns to
userland, exits or gets stopped for ptrace.
For kernel threads and atomic contexts it's done via
schedule_work(), so theoretically we might need a way to make sure
it's finished; so far only one such place had been found, but there
might be more.
There's flush_delayed_fput() (do all pending __fput()) and there's
__fput_sync() (fput() analog doing __fput() immediately). I hope
we won't need them often; see warnings in fs/file_table.c for
details. [me, based on task_work series from Oleg merged last
cycle]
- sync series from Jan
- large part of "death to sync_supers()" work from Artem; the only
bits missing here are exofs and ext4 ones. As far as I understand,
those are going via the exofs and ext4 trees resp.; once they are
in, we can put ->write_super() to the rest, along with the thread
calling it.
- preparatory bits from unionmount series (from dhowells).
- assorted cleanups and fixes all over the place, as usual.
This is not the last pile for this cycle; there's at least jlayton's
ESTALE work and fsfreeze series (the latter - in dire need of fixes,
so I'm not sure it'll make the cut this cycle). I'll probably throw
symlink/hardlink restrictions stuff from Kees into the next pile, too.
Plus there's a lot of misc patches I hadn't thrown into that one -
it's large enough as it is..."
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (127 commits)
ext4: switch EXT4_IOC_RESIZE_FS to mnt_want_write_file()
btrfs: switch btrfs_ioctl_balance() to mnt_want_write_file()
switch dentry_open() to struct path, make it grab references itself
spufs: shift dget/mntget towards dentry_open()
zoran: don't bother with struct file * in zoran_map
ecryptfs: don't reinvent the wheels, please - use struct completion
don't expose I_NEW inodes via dentry->d_inode
tidy up namei.c a bit
unobfuscate follow_up() a bit
ext3: pass custom EOF to generic_file_llseek_size()
ext4: use core vfs llseek code for dir seeks
vfs: allow custom EOF in generic_file_llseek code
vfs: Avoid unnecessary WB_SYNC_NONE writeback during sys_sync and reorder sync passes
vfs: Remove unnecessary flushing of block devices
vfs: Make sys_sync writeout also block device inodes
vfs: Create function for iterating over block devices
vfs: Reorder operations during sys_sync
quota: Move quota syncing to ->sync_fs method
quota: Split dquot_quota_sync() to writeback and cache flushing part
vfs: Move noop_backing_dev_info check from sync into writeback
...
Use the new custom EOF argument to generic_file_llseek_size so
that SEEK_END will go to the max hash value for htree dirs
in ext3 rather than to i_size_read()
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use the new functionality in generic_file_llseek_size() to
accept a custom EOF position, and un-cut-and-paste all the
vfs llseek code from ext4.
Also fix up comments on ext4_llseek() to reflect reality.
Signed-off-by: Eric Sandeen <sandeen@redaht.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For ext3/4 htree directories, using the vfs llseek function with
SEEK_END goes to i_size like for any other file, but in reality
we want the maximum possible hash value. Recent changes
in ext4 have cut & pasted generic_file_llseek() back into fs/ext4/dir.c,
but replicating this core code seems like a bad idea, especially
since the copy has already diverged from the vfs.
This patch updates generic_file_llseek_size to accept
both a custom maximum offset, and a custom EOF position. With this
in place, ext4_dir_llseek can pass in the appropriate maximum hash
position for both maxsize and eof, and get what it wants.
As far as I know, this does not fix any bugs - nfs in the kernel
doesn't use SEEK_END, and I don't know of any user who does. But
some ext4 folks seem keen on doing the right thing here, and I can't
really argue.
(Patch also fixes up some comments slightly)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
wakeup_flusher_threads(0) will queue work doing complete writeback for each
flusher thread. Thus there is not much point in submitting another work doing
full inode WB_SYNC_NONE writeback by writeback_inodes_sb().
After this change it does not make sense to call nonblocking ->sync_fs and
block device flush before calling sync_inodes_sb() because
wakeup_flusher_threads() is completely asynchronous and thus these functions
would be called in parallel with inode writeback running which will effectively
void any work they do. So we move sync_inodes_sb() call before these two
functions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It is not necessary to write block devices twice. The reason why we first did
flush and then proper sync is that
for_each_bdev() {
write_bdev()
wait_for_completion()
}
is much slower than
for_each_bdev()
write_bdev()
for_each_bdev()
wait_for_completion()
when there is bigger amount of data. But as is seen in the above, there's no real
need to scan pages and submit them twice. We just need to separate the submission
and waiting part. This patch does that.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In case block device does not have filesystem mounted on it, sys_sync will just
ignore it and doesn't writeout its dirty pages. This is because writeback code
avoids writing inodes from superblock without backing device and
blockdev_superblock is such a superblock. Since it's unexpected that sync
doesn't writeout dirty data for block devices be nice to users and change the
behavior to do so. So now we iterate over all block devices on blockdev_super
instead of iterating over all superblocks when syncing block devices.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Change the order of operations during sync from
for_each_sb {
writeback_inodes_sb();
sync_fs(nowait);
__sync_blockdev(nowait);
}
for_each_sb {
sync_inodes_sb();
sync_fs(wait);
__sync_blockdev(wait);
}
to
for_each_sb
writeback_inodes_sb();
for_each_sb
sync_fs(nowait);
for_each_sb
__sync_blockdev(nowait);
for_each_sb
sync_inodes_sb();
for_each_sb
sync_fs(wait);
for_each_sb
__sync_blockdev(wait);
This is a preparation for the following patches in this series.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Since the moment writes to quota files are using block device page cache and
space for quota structures is reserved at the moment they are first accessed we
have no reason to sync quota before inode writeback. In fact this order is now
only harmful since quota information can easily change during inode writeback
(either because conversion of delayed-allocated extents or simply because of
allocation of new blocks for simple filesystems not using page_mkwrite).
So move syncing of quota information after writeback of inodes into ->sync_fs
method. This way we do not have to use ->quota_sync callback which is primarily
intended for use by quotactl syscall anyway and we get rid of calling
->sync_fs() twice unnecessarily. We skip quota syncing for OCFS2 since it does
proper quota journalling in all cases (unlike ext3, ext4, and reiserfs which
also support legacy non-journalled quotas) and thus there are no dirty quota
structures.
CC: "Theodore Ts'o" <tytso@mit.edu>
CC: Joel Becker <jlbec@evilplan.org>
CC: reiserfs-devel@vger.kernel.org
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Dave Kleikamp <shaggy@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split off part of dquot_quota_sync() which writes dquots into a quota file
to a separate function. In the next patch we will use the function from
filesystems and we do not want to abuse ->quota_sync quotactl callback more
than necessary.
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pavel Shilovsky
Pavel Shilovsky
Pavel Shilovsky
Steve French
Jeff Layton
J. Bruce Fields
Linus Torvalds
Al Viro
Eric Sandeen
Jan Kara