Currently jffs2 has compile-time constants (and .config options)
controlling whether or not the various compression/decompression
drivers are built in and enabled. This is fine for embedded
systems, but it clashes with distribution kernels. Distro kernels
tend to turn on everything; this causes OpenFirmware to fall
over, as it understands ZLIB-compressed inodes. Booting a kernel
that has LZO compression enabled, writing to the boot partition,
and then rebooting causes OFW to fail to read the kernel from
the filesystem. This is because LZO compression has priority
when writing new data to jffs2, if LZO is enabled.
This patch adds mount option parsing, and a single supported
option ("compr=none"). This adds the flexibility of being
able to specify which compressor overrides on a per-superblock
basis. For now, we can simply disable compression;
additional flexibility coming soon.
v2: kill some printks, and implement show_options as suggested
by Artem Bityutskiy.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
These modes are not necessarily for OOB only. Particularly, MTD_OOB_RAW
affected operations on in-band page data as well. To clarify these
options and to emphasize that their effect is applied per-operation, we
change the primary prefix to MTD_OPS_.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
Use a helper to test if a mutex is held instead of a hack with
mutex_trylock().
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
kfree() deals gracefully with NULL pointers, so it's pointless to test for
one prior to calling it.
This removes such a test from jffs2_scan_medium().
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: replace xfs_buf_geterror() with bp->b_error
xfs: Check the return value of xfs_buf_read() for NULL
"xfs: fix error handling for synchronous writes" revisited
xfs: set cursor in xfs_ail_splice() even when AIL was empty
xfs: Remove the macro XFS_BUFTARG_NAME
xfs: Remove the macro XFS_BUF_TARGET
xfs: Remove the macro XFS_BUF_SET_TARGET
Replace the macro XFS_BUF_ISPINNED with helper xfs_buf_ispinned
xfs: Remove the macro XFS_BUF_SET_PTR
xfs: Remove the macro XFS_BUF_PTR
xfs: Remove macro XFS_BUF_SET_START
xfs: Remove macro XFS_BUF_HOLD
xfs: Remove macro XFS_BUF_BUSY and family
xfs: Remove the macro XFS_BUF_ERROR and family
xfs: Remove the macro XFS_BUF_BFLAGS
Since we just checked bp for NULL, it is ok to replace
xfs_buf_geterror() with bp->b_error in these places.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Check the return value of xfs_buf_read() for NULL and return ENOMEM
if it is NULL. This is necessary in a few spots to avoid subsequent
code blindly dereferencing the null buffer pointer.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
e1000e: increase driver version number
e1000e: alternate MAC address update
e1000e: do not disable receiver on 82574/82583
e1000e: alternate MAC address does not work on device id 0x1060
PCnet: Fix section mismatch
bnx2x: disable dcb on 578xx since not supported yet
bnx2x: properly clean indirect addresses
bnx2x: prevent race between undi_unload and load flows
bnx2x: fix select_queue when FCoE is disabled
bnx2x: init FCOE FP only once
ipv4: some rt_iif -> rt_route_iif conversions
net/bridge/netfilter/ebtables.c: use available error handling code
net/netlabel/netlabel_kapi.c: add missing cleanup code
net/irda: sh_sir: tidyup compile warning
net/irda: sh_sir: add missing header
net/irda: sh_irda: add missing header
slcan: ldisc generated skbs are received in softirq context
scm: Capture the full credentials of the scm sender
tcp: initialize variable ecn_ok in syncookies path
drivers/net/wireless/wl1251: add missing kfree
...
Just like files-layout, blocks & objects layouts are part of the
NFS 4.1 protocol and should be automatically selected if NFS_4_1
is selected. The small problem is that these depend on other
Kernel support being present, while files only depends on NFS
itself.
This patch removes from the user choice the presence of objects
and blocks layout. But makes sure these are selected only if
the depended subsystems are present in the Kernel.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit df5e622340 ("ext4: fix deadlock in ext4_symlink() in ENOSPC
conditions") recalculated the number of credits needed for a long
symlink, in the process of splitting it into two transactions. However,
the first credit calculation under-counted because if selinux is
enabled, credits are needed to create the selinux xattr as well.
Overrunning the reservation will result in an OOPS in
jbd2_journal_dirty_metadata() due to this assert:
J_ASSERT_JH(jh, handle->h_buffer_credits > 0);
Fix this by increasing the reservation size.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit ae54870a1d ("ext3: Fix lock inversion in ext3_symlink()")
recalculated the number of credits needed for a long symlink, in the
process of splitting it into two transactions. However, the first
credit calculation under-counted because if selinux is enabled, credits
are needed to create the selinux xattr as well.
Overrunning the reservation will result in an OOPS in
journal_dirty_metadata() due to this assert:
J_ASSERT_JH(jh, handle->h_buffer_credits > 0);
Fix this by increasing the reservation size.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch http://lkml.org/lkml/2003/7/13/226 introduced an RLIMIT_NPROC
check in set_user() to check for NPROC exceeding via setuid() and
similar functions.
Before the check there was a possibility to greatly exceed the allowed
number of processes by an unprivileged user if the program relied on
rlimit only. But the check created new security threat: many poorly
written programs simply don't check setuid() return code and believe it
cannot fail if executed with root privileges. So, the check is removed
in this patch because of too often privilege escalations related to
buggy programs.
The NPROC can still be enforced in the common code flow of daemons
spawning user processes. Most of daemons do fork()+setuid()+execve().
The check introduced in execve() (1) enforces the same limit as in
setuid() and (2) doesn't create similar security issues.
Neil Brown suggested to track what specific process has exceeded the
limit by setting PF_NPROC_EXCEEDED process flag. With the change only
this process would fail on execve(), and other processes' execve()
behaviour is not changed.
Solar Designer suggested to re-check whether NPROC limit is still
exceeded at the moment of execve(). If the process was sleeping for
days between set*uid() and execve(), and the NPROC counter step down
under the limit, the defered execve() failure because NPROC limit was
exceeded days ago would be unexpected. If the limit is not exceeded
anymore, we clear the flag on successful calls to execve() and fork().
The flag is also cleared on successful calls to set_user() as the limit
was exceeded for the previous user, not the current one.
Similar check was introduced in -ow patches (without the process flag).
v3 - clear PF_NPROC_EXCEEDED on successful calls to set_user().
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PNFS_BLOCK needs BLK_DEV_DM/MD, which is not a dependency for other
pnfs layout drivers. Seperate it out so others can still build when
BLK_DEV_DM/MD is not enabled.
Also change select to depends on to avoid build failures.
Reported-and-tested-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Acked-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
xfs: fix for hang during synchronous buffer write error
If removed storage while synchronous buffer write underway,
"xfslogd" hangs.
Detailed log http://oss.sgi.com/archives/xfs/2011-07/msg00740.html
Related work bfc60177f8
"xfs: fix error handling for synchronous writes"
Given that xfs_bwrite actually does the shutdown already after
waiting for the b_iodone completion and given that we actually
found that calling xfs_force_shutdown from inside
xfs_buf_iodone_callbacks was a major contributor the problem
it better to drop this call.
Signed-off-by: Ajeet Yadav <ajeet.yadav.77@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Close a TOCTOU race for mounts done via ecryptfs-mount-private. The mount
source (device) can be raced when the ownership test is done in userspace.
Provide Ecryptfs a means to force the uid check at mount time.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Cc: <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
In xfs_ail_splice(), if a cursor is provided it is updated to
point to the last item on the list being spliced into the AIL.
But if the AIL was found to be empty, the cursor (if provided)
is just initialized instead.
There is no reason the empty AIL case needs to be treated any
differently. And treating it the same way allows this code
to be rearranged a bit, with a somewhat tidier result.
Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
fs/ecryptfs/keystore.c: In function ‘ecryptfs_generate_key_packet_set’:
fs/ecryptfs/keystore.c:1991:28: warning: ‘payload_len’ may be used uninitialized in this function [-Wuninitialized]
fs/ecryptfs/keystore.c:1976:9: note: ‘payload_len’ was declared here
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
This patch fixes the compile error reported at the address:
https://bugzilla.kernel.org/show_bug.cgi?id=40292
The problem arises when compiling eCryptfs as built-in and the 'encrypted'
key type as a module. The patch prevents this combination from being set in
the kernel configuration, by fixing the eCryptfs dependencies.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Reported-by: David Hill <hilld@binarystorm.net>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
When an eCryptfs inode's lower file has been closed, and the pointer has
been set to NULL, return an error when trying to do a lower read or
write rather than calling BUG().
https://bugzilla.kernel.org/show_bug.cgi?id=37292
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
The previous comit made the autofs4 debug printouts check types against
the printout format, and uncovered this bug:
fs/autofs4/waitq.c:106:2: warning: format ‘%08lx’ expects type ‘long unsigned int’, but argument 4 has type ‘autofs_wqt_t’
which is due to the insane type for wait_queue_token. That thing should
be some fixed well-defined size (preferably just 'unsigned int' or
'u32') but for unexplained reasons it is randomly either 'unsigned long'
or 'unsigned int' depending on the architecture.
For now, cast it to 'unsigned long' for printing, the way we do
elsewhere. Somebody else can try to explain the typedef mess.
(There's a reason we don't support excessive use of typedefs in the
kernel: it's usually just a good way of confusing yourself).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use 'pr_debug()' for DPRINTK, which will do the proper type checking on
the arguments (without generating code) even when DEBUG isn't #defined.
Also, use the standard __VA_ARGS__ for the macros, and stop the
pointless abuse of 'do { xyz } while (0)' when the macro is already a
perfectly well-formed single statement.
Reported-by: David Howells <dhowells@redhat.com>
Suggested-by: Joe Perches <joe@perches.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fixes following error seen on x86_64 kernel:
ioctl32(openl2tpd:7480): Unknown cmd fd(14) cmd(80487436){t:'t';sz:72} arg(ffa7e6c0) on socket:[105094]
The argument (struct pppol2tp_ioc_stats) uses "aligned_u64" and thus doesn't need
fixups.
Cc: James Chapman <jchapman@katalix.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Al points out that the do_follow_link() helper function really is
misnamed - it's about whether we should try to follow a symlink or not,
not about actually doing the following.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After commit 3567866bf261: "RCUify freeing acls, let check_acl() go ahead in
RCU mode if acl is cached" posix_acl_permission is being called with an
unsupported flag and the permission check fails. This patch fixes the issue.
Signed-off-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
ore: Make ore its own module
exofs: Rename raid engine from exofs/ios.c => ore
exofs: ios: Move to a per inode components & device-table
exofs: Move exofs specific osd operations out of ios.c
exofs: Add offset/length to exofs_get_io_state
exofs: Fix truncate for the raid-groups case
exofs: Small cleanup of exofs_fill_super
exofs: BUG: Avoid sbi realloc
exofs: Remove pnfs-osd private definitions
nfs_xdr: Move nfs4_string definition out of #ifdef CONFIG_NFS_V4
The inode structure layout is largely random, and some of the vfs paths
really do care. The path lookup in particular is already quite D$
intensive, and profiles show that accessing the 'inode->i_op->xyz'
fields is quite costly.
We already optimized the dcache to not unnecessarily load the d_op
structure for members that are often NULL using the DCACHE_OP_xyz bits
in dentry->d_flags, and this does something very similar for the inode
ops that are used during pathname lookup.
It also re-orders the fields so that the fields accessed by 'stat' are
together at the beginning of the inode structure, and roughly in the
order accessed.
The effect of this seems to be in the 1-2% range for an empty kernel
"make -j" run (which is fairly kernel-intensive, mostly in filename
lookup), so it's visible. The numbers are fairly noisy, though, and
likely depend a lot on exact microarchitecture. So there's more tuning
to be done.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gcc tends to generate better code with small integers, including the
DCACHE_xyz flag tests - so move the common ones to be first in the list.
Also just remove the unused DCACHE_INOTIFY_PARENT_WATCHED and
DCACHE_AUTOFS_PENDING values, their users no longer exists in the source
tree.
And add a "unlikely()" to the DCACHE_OP_COMPARE test, since we want the
common case to be a nice straight-line fall-through.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Export everything from ore need exporting. Change Kbuild and Kconfig
to build ore.ko as an independent module. Import ore from exofs
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
ORE stands for "Objects Raid Engine"
This patch is a mechanical rename of everything that was in ios.c
and its API declaration to an ore.c and an osd_ore.h header. The ore
engine will later be used by the pnfs objects layout driver.
* File ios.c => ore.c
* Declaration of types and API are moved from exofs.h to a new
osd_ore.h
* All used types are prefixed by ore_ from their exofs_ name.
* Shift includes from exofs.h to osd_ore.h so osd_ore.h is
independent, include it from exofs.h.
Other than a pure rename there are no other changes. Next patch
will move the ore into it's own module and will export the API
to be used by exofs and later the layout driver
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Exofs raid engine was saving on memory space by having a single layout-info,
single pid, and a single device-table, global to the filesystem. Then passing
a credential and object_id info at the io_state level, private for each
inode. It would also devise this contraption of rotating the device table
view for each inode->ino to spread out the device usage.
This is not compatible with the pnfs-objects standard, demanding that
each inode can have it's own layout-info, device-table, and each object
component it's own pid, oid and creds.
So: Bring exofs raid engine to be usable for generic pnfs-objects use by:
* Define an exofs_comp structure that holds obj_id and credential info.
* Break up exofs_layout struct to an exofs_components structure that holds a
possible array of exofs_comp and the array of devices + the size of the
arrays.
* Add a "comps" parameter to get_io_state() that specifies the ids creds
and device array to use for each IO.
This enables to keep the layout global, but the device-table view, creds
and IDs at the inode level. It only adds two 64bit to each inode, since
some of these members already existed in another form.
* ios raid engine now access layout-info and comps-info through the passed
pointers. Everything is pre-prepared by caller for generic access of
these structures and arrays.
At the exofs Level:
* Super block holds an exofs_components struct that holds the device
array, previously in layout. The devices there are in device-table
order. The device-array is twice bigger and repeats the device-table
twice so now each inode's device array can point to a random device
and have a round-robin view of the table, making it compatible to
previous exofs versions.
* Each inode has an exofs_components struct that is initialized at
load time, with it's own view of the device table IDs and creds.
When doing IO this gets passed to the io_state together with the
layout.
While preforming this change. Bugs where found where credentials with the
wrong IDs where used to access the different SB objects (super.c). As well
as some dead code. It was never noticed because the target we use does not
check the credentials.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
ios.c will be moving to an external library, for use by the
objects-layout-driver. Remove from it some exofs specific functions.
Also g_attr_logical_length is used both by inode.c and ios.c
move definition to the later, to keep it independent
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
In future raid code we will need to know the IO offset/length
and if it's a read or write to determine some of the array
sizes we'll need.
So add a new exofs_get_rw_state() API for use when
writeing/reading. All other simple cases are left using the
old way.
The major change to this is that now we need to call
exofs_get_io_state later at inode.c::read_exec and
inode.c::write_exec when we actually know these things. So this
patch is kept separate so I can test things apart from other
changes.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: cope with negative dentries in cifs_get_root
cifs: convert prefixpath delimiters in cifs_build_path_to_root
CIFS: Fix missing a decrement of inFlight value
cifs: demote DFS referral lookup errors to cFYI
Revert "cifs: advertise the right receive buffer size to the server"
The CLOEXE bit is magical, and for performance (and semantic) reasons we
don't actually maintain it in the file descriptor itself, but in a
separate bit array. Which means that when we show f_flags, the CLOEXE
status is shown incorrectly: we show the status not as it is now, but as
it was when the file was opened.
Fix that by looking up the bit properly in the 'fdt->close_on_exec' bit
array.
Uli needs this in order to re-implement the pfiles program:
"For normal file descriptors (not sockets) this was the last piece of
information which wasn't available. This is all part of my 'give
Solaris users no reason to not switch' effort. I intend to offer the
code to the util-linux-ng maintainers."
Requested-by: Ulrich Drepper <drepper@akkadia.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WARN_ONCE() is very annoying, in that it shows the stack trace that we
don't care about at all, and also triggers various user-level "kernel
oopsed" logic that we really don't care about. And it's not like the
user can do anything about the applications (sshd) in question, it's a
distro issue.
Requested-by: Andi Kleen <andi@firstfloor.org> (and many others)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The loop around lookup_one_len doesn't handle the case where it might
return a negative dentry, which can cause an oops on the next pass
through the loop. Check for that and break out of the loop with an
error of -ENOENT if there is one.
Fixes the panic reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=727927
Reported-by: TR Bentley <home@trarbentley.net>
Reported-by: Iain Arnell <iarnell@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Regression from 2.6.39...
The delimiters in the prefixpath are not being converted based on
whether posix paths are in effect. Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=727834
Reported-and-Tested-by: Iain Arnell <iarnell@gmail.com>
Reported-by: Patrick Oltmann <patrick.oltmann@gmx.net>
Cc: Pavel Shilovsky <piastryyy@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
RCUify freeing acls, let check_acl() go ahead in RCU mode if acl is cached
get rid of boilerplate switches in posix_acl.h
fix block device fallout from ->fsync() changes
In the general raid-group case the truncate was wrong in that
it did not also fix the object length of the neighboring groups.
There are two bad cases in the old code:
1. Space that should be freed was not.
2. If a file That was big is truncated small, then made bigger
again, the holes would not contain zeros but could expose old data.
(If the growing of the file expands to more than a full
groups cycle + group size (> S + T))
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Since the beginning we realloced the sbi structure when a bigger
then one device table was specified. (I know that was really stupid).
Then much later when "register bdi" was added (By Jens) it was
registering the pointer to sbi->bdi before the realloc.
We never saw this problem because up till now the realloc did not
do anything since the device table was small enough to fit in the
original allocation. But once we starting testing with large device
tables (Bigger then 28) we noticed the crash of writeback operating
on a deallocated pointer.
* Avoid the all mess by allocating the device-table as a second array
and get rid of the variable-sized structure and the rest of this
mess.
* Take the chance to clean near by structures and comments.
* Add a needed dprint on startup to indicate the loaded layout.
* Also move the bdi registration to the very end because it will
only fail in a low memory, which will probably fail before hand.
There are many more likely causes to not load before that. This
way the error handling is made simpler. (Just doing this would be
enough to fix the BUG)
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Expand the fs/Kconfig "help" info to clarify why it's a bad idea to
deselect the TMPFS_POSIX_ACL config variable.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove PageSwapBacked (!page_is_file_cache) cases from
add_to_page_cache_locked() and add_to_page_cache_lru(): those pages now
go through shmem_add_to_page_cache().
Remove a comment on maximum tmpfs size from fsstack_copy_inode_size(),
and add a comment on swap entries to invalidate_mapping_pages().
And mincore_page() uses find_get_page() on what might be shmem or a
tmpfs file: allow for a radix_tree_exceptional_entry(), and proceed to
find_get_page() on swapper_space if so (oh, swapper_space needs #ifdef).
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix new kernel-doc warning in fs/dcache.c:
Warning(fs/dcache.c:797): No description found for parameter 'sb'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
if we failed on getting mid entry in cifs_call_async.
Cc: stable@kernel.org
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Commit 9933fc0i (ext4: introduce ext4_kvmalloc(), ext4_kzalloc(), and
ext4_kvfree()) intruduced wrappers around k*alloc/vmalloc but introduced
a typo for ext4_kzalloc() by not using kzalloc() but kmalloc().
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Andres Salomon
Brian Norris
Alexey Khoroshilov
Jesper Juhl
Linus Torvalds
Chandra Seetharaman
Boaz Harrosh
Eric Sandeen
Vasiliy Kulikov
Peng Tao
Ajeet Yadav
John Johansen
Alex Elder
Tyler Hicks
Roberto Sassu
Florian Westphal
Ari Savolainen
Jeff Layton
Robert P. J. Day
Hugh Dickins
Randy Dunlap
Pavel Shilovsky
Mathias Krause