The device is manufactured by IPWireless. In some countries (for
example Czech Republic, T-Mobile ISP) this card is shipped for service
called UMTS 4G.
It's a piece of PCMCIA "4G" UMTS PPP networking hardware that presents
itself as a serial character device (i.e. looks like usual modem to
userspace, accepts AT commands, etc).
Rewieved-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Ben Martel <benm@symmetric.co.nz>
Signed-off-by: Stephen Blackheath <stephen@symmetric.co.nz>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make sure we have enough room for all the GR registers or we'll end up
clobbering the AR index register (which should actually be harmless
unless the BIOS is making an assumption about it).
Noticed-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (22 commits)
drm: add initial r500 drm support
radeon: setup the ring buffer fetcher to be less agressive.
drm: fixup some of the ioctl function exit paths
drm: the drm really should call pci_set_master..
i915: Add chipset id for Intel Integrated Graphics Device
drm: cleanup DRM_DEBUG() parameters
drm/i915: add support for E7221 chipset
drm: don't cast a pointer to pointer of list_head
mga_dma: return 'err' not just zero from mga_do_cleanup_dma()
drm: add _DRM_DRIVER flag, and re-order unload.
drm: enable udev node creation
drm: Make DRM_IOCTL_GET_CLIENT return EINVAL when it can't find client #idx.
drm: move drm_mem_init to proper place in startup sequence
drm: call driver load function after initialising AGP
drm: Fix ioc32 compat layer
drm: fd.o bug #11895: Only add the AGP base to map offset if the caller didn't.
i915: add suspend/resume support
drm: update DRM sysfs support
drm: Initialize the AGP structure's base address at init rather than enable.
drm: move two function extern into the correct block
...
Add new card (0x1393:0x1143) support added in 1.11 original driver, also
allow rate change in set_serial_info ioctl (as per 1.11 too).
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(Old) mxser is obsoleted by mxser_new and scheduled for removal on Dec 2007.
Remove it by renaming mxser_new to mxser.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- remove dead MOXA_GET_CONF (always returned -ENXIO)
- remove useless MOXA_GET_CUMAJOR (unused)
- use get/put_user instead of copy_from/to_user for simple types
- cleanup TIOCMIWAIT -- return -ERESTARTSYS on signal, move condition into
separate function
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Initialize temp structure directly with proper values without first zeroing
it and setting later as suggested by Jan.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reorder fields to save some memory and code on 64bit due to alignment as
suggested by Jan.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't test a pointer against 0. Use NULL instead.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let the special baudrate processing on the tty layer. Also remove
set/get_special_rate ioctls introduced in commit
f64c84a166, since it is no longer needed.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both of them may be called directly from the code, don't add special code
and variables and schedule a work for them.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Cy_EVENT_OPEN_WAKEUP is simple wake_up
- Cy_EVENT_HANGUP is wake_up + tty_hangup, which schedules its own work
- Cy_EVENT_WRITE_WAKEUP is tty_wakeup which may be called directly too
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- tty_hangup schedules a bottomhalf itself, tty_wakeup doesn't need it
- call the CD code (part of work handler previously) directly from the code
(it wakes somebody up or calls tty_hangup at worse)
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- tqueue is used only for tty_wakeup, call it directly from the code
- tqueue_hangup for tty_hangup, it schedules its own work, use it directly
too
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
tty_hangup schedules a work for hangup itself, no need to do it in the driver.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need to schedule a bottomhalf for either of them. One is fast
and the another schedules a bottomhalf itself.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let compiler decide if the rc_init_drivers function will be inlined and
mark it as __init, because it's called only from __init function.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't emit warnings on 64 bit platforms from min(). sizeof() on those
is not uint, neither 2 pointers difference, cast it to uint by min_t in
both cases.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To not pass ulong address as int parameter, switch it to ulong.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- add KERN_ level to each print
- change some levels appropriately
- add \n at the ends where missing
- change two complex printks into dev_info, where the original info is
printed automatically
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't busy wait for whole 1s when registering some rocket modems. Sleep
instead since we are not in atomic.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Needs the following in order to work correctly on my Inspiron E1705:
Add DMI Product name to i8k for Dell MP061 hardware (Inspiron 9400/E1705)
Signed-off-by: Frank Sorenson <frank@tuxrocks.com>
Cc: Bradley Smith <bradjsmith@btinternet.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adds #if clause and additional inline assembly so that the driver
builds on x86_64 systems.
Signed-off-by: Bradley Smith <bradjsmith@btinternet.com>
Cc: Frank Sorenson <frank@tuxrocks.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MBCS: Convert the semaphore dmareadlock to the mutex API
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MBCS: Convert the semaphore dmawritelock to the mutex API
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MBCS: Convert the semaphore algolock to the mutex API
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds CP support for the r500 series of chips, and allows
accel 2D support on these chips with a new radeon driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
perhaps bonghits could turn on my bus-mastering because the drm
certainly never bothered doing it before.
Signed-off-by: Dave Airlie <airlied@linux.ie>
As DRM_DEBUG macro already prints out the __FUNCTION__ string (see
drivers/char/drm/drmP.h), it is not worth doing this again. At some
other places the ending "\n" was added.
airlied:- I cleaned up a few that this patch missed also
Signed-off-by: Dave Airlie <airlied@linux.ie>
The casting is safe only when the list_head member is the first member of
the structure.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
While reading some code I stumbled across the use of 'err' in
drivers/char/drm/mga_dma.c::mga_do_cleanup_dma() and I think there's a small
problem.
The variable is only used inside #if __OS_HAS_AGP which is fine, but all that
ever happens is an assignment to the variable - it is never actually used for
anything. The variable is nicely initialized to zero which is also what the
return statement at the end of function returns (always at the moment).
It looks to me like that function should be returning 'err' instead of always
just returning 0. Here's a patch to do that.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Allow drivers to addmaps that won't be removed by lastclose or unload.
The unload needs to be re-ordered to avoid removing the hashs before
the driver has removed the final maps.
Signed-off-by: Dave Airlie <airlied@linux.ie>
Previously any ioctls that weren't explicitly listed in the compat ioctl
table would fail with ENOTTY. If the incoming ioctl number is outside the
range of the table, assume that it Just Works, and pass it off to drm_ioctl.
This make the fence related ioctls work on 64-bit PowerPC.
Signed-off-by: Dave Airlie <airlied@linux.ie>
The i830 and newer intel 2D code adds the AGP base to map offsets already,
because it wasn't doing the AGP enable which used to set dev->agp->base.
Credit goes to Zhenyu for finding the issue.
Signed-off-by: Dave Airlie <airlied@linux.ie>
Add suspend/resume support to the i915 driver. Moves some of the
initialization into the driver load routine, and fixes up places where we
assumed no dev_private existed in some of the cleanup paths. This allows
us to suspend/resume properly even if X isn't running.
Signed-off-by: Dave Airlie <airlied@linux.ie>
Make DRM devices use real Linux devices instead of class devices, which are
going away. While we're at it, clean up some of the interfaces to take
struct drm_device * or struct device * and use the global drm_class where
needed instead of passing it around.
Signed-off-by: Dave Airlie <airlied@linux.ie>
David Sterba
Linus Torvalds
Jesse Barnes
Jiri Slaby
Alan Cox
Frank Sorenson
Bradley Smith
Matthias Kaehlcke
Dave Airlie
Roland Scheidegger
Zhenyu Wang
Márton Németh
Carlos Martín
Li Zefan
Jesper Juhl
Dave Airlie
Eric Anholt
Ian Romanick