Граф коммитов

54 Коммитов

Автор SHA1 Сообщение Дата
Eric B Munson 5d1c0f4a80 watchdog: add check for suspended vm in softlockup detector
A suspended VM can cause spurious soft lockup warnings.  To avoid these, the
watchdog now checks if the kernel knows it was stopped by the host and skips
the warning if so.  When the watchdog is reset successfully, clear the guest
paused flag.

Signed-off-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:49:03 +03:00
Andrew Morton b60f796c4c kernel/watchdog.c: add comment to watchdog() exit path
Revelation from Peter.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@tglx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:32 -07:00
Andrew Morton 4501980aae kernel/watchdog.c: convert to pr_foo()
It fixes some 80-col wordwrappings and adds some consistency.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:32 -07:00
Michal Hocko 7a05c0f7bb watchdog: make sure the watchdog thread gets CPU on loaded system
If the system is loaded while hotplugging a CPU we might end up with a
bogus hardlockup detection.  This has been seen during LTP pounder test
executed in parallel with hotplug test.

The main problem is that enable_watchdog (called when CPU is brought up)
registers perf event which periodically checks per-cpu counter
(hrtimer_interrupts), updated from a hrtimer callback, but the hrtimer
is fired from the kernel thread.

This means that while we already do check for the hard lockup the kernel
thread might be sitting on the runqueue with zillions of tasks so there
is nobody to update the value we rely on and so we KABOOM.

Let's fix this by boosting the watchdog thread priority before we wake
it up rather than when it's already running.  This still doesn't handle
a case where we have the same amount of high prio FIFO tasks but that
doesn't seem to be common.  The current implementation doesn't handle
that case anyway so this is not worse at least.

Unfortunately, we cannot start perf counter from the watchdog thread
because we could miss a real lock up and also we cannot start the
hrtimer watchdog_enable because we there is no way (at least I don't
know any) to start a hrtimer from a different CPU.

[dzickus@redhat.com: fix compile issue with param]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:32 -07:00
Fernando Luis Vázquez Cao 86f5e6a7b1 watchdog: Fix code/comments mismatches
Reflect the change in the soft and hard lockup thresholds and
their relation to the frequency of the hrtimer and NMI events in
the code comments. While at it, remove references to files that
do not exist anymore.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1328827342-6253-3-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-11 15:11:33 +01:00
Prarit Bhargava b0f4c4b32c bugs, x86: Fix printk levels for panic, softlockups and stack dumps
rsyslog will display KERN_EMERG messages on a connected
terminal.  However, these messages are useless/undecipherable
for a general user.

For example, after a softlockup we get:

 Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
 kernel:Stack:

 Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
 kernel:Call Trace:

 Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
 kernel:Code: ff ff a8 08 75 25 31 d2 48 8d 86 38 e0 ff ff 48 89
 d1 0f 01 c8 0f ae f0 48 8b 86 38 e0 ff ff a8 08 75 08 b1 01 4c 89 e0 0f 01 c9 <e8> ea 69 dd ff 4c 29 e8 48 89 c7 e8 0f bc da ff 49 89 c4 49 89

This happens because the printk levels for these messages are
incorrect. Only an informational message should be displayed on
a terminal.

I modified the printk levels for various messages in the kernel
and tested the output by using the drivers/misc/lkdtm.c kernel
modules (ie, softlockups, panics, hard lockups, etc.) and
confirmed that the console output was still the same and that
the output to the terminals was correct.

For example, in the case of a softlockup we now see the much
more informative:

 Message from syslogd@intel-s3e37-04 at Jan 25 10:18:06 ...
 BUG: soft lockup - CPU4 stuck for 60s!

instead of the above confusing messages.

AFAICT, the messages no longer have to be KERN_EMERG.  In the
most important case of a panic we set console_verbose().  As for
the other less severe cases the correct data is output to the
console and /var/log/messages.

Successfully tested by me using the drivers/misc/lkdtm.c module.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: dzickus@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1327586134-11926-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:28:45 +01:00
Vasily Averin 4ff819515b watchdog: move watchdog_*_all_cpus under CONFIG_SYSCTL
Fix compilation warnings for CONFIG_SYSCTL=n:

fixed compilation warnings in case of disabled CONFIG_SYSCTL
kernel/watchdog.c:483:13: warning: `watchdog_enable_all_cpus' defined but not used
kernel/watchdog.c:500:13: warning: `watchdog_disable_all_cpus' defined but not used

these functions are static and are used only in sysctl handler, so move
them inside #ifdef CONFIG_SYSCTL too

Signed-off-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:53 -07:00
Thomas Gleixner cba9bd22a5 watchdog: Drop FIFO policy in exit path
When the watchdog thread exits it runs through the exit path with FIFO
priority. There is no point in doing so. Switch back to SCHED_NORMAL
before exiting.

Cc: Don Zickus <dzickus@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1109121337461.2723@ionos
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-18 14:34:07 +02:00
Eric Dumazet 18e5a45db3 watchdog: Make the kthreads NUMA affine
Watchdog kthreads can use kthread_create_on_node() to NUMA affine their
stack and task_struct.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1312394344-18815-1-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-14 11:53:06 +02:00
Cyrill Gorcunov f912987097 perf, x86: P4 PMU - Introduce event alias feature
Instead of hw_nmi_watchdog_set_attr() weak function
and appropriate x86_pmu::hw_watchdog_set_attr() call
we introduce even alias mechanism which allow us
to drop this routines completely and isolate quirks
of Netburst architecture inside P4 PMU code only.

The main idea remains the same though -- to allow
nmi-watchdog and perf top run simultaneously.

Note the aliasing mechanism applies to generic
PERF_COUNT_HW_CPU_CYCLES event only because arbitrary
event (say passed as RAW initially) might have some
additional bits set inside ESCR register changing
the behaviour of event and we can't guarantee anymore
that alias event will give the same result.

P.S. Thanks a huge to Don and Steven for for testing
     and early review.

Acked-by: Don Zickus <dzickus@redhat.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
CC: Ingo Molnar <mingo@elte.hu>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Stephane Eranian <eranian@google.com>
CC: Lin Ming <ming.m.lin@intel.com>
CC: Arnaldo Carvalho de Melo <acme@redhat.com>
CC: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20110708201712.GS23657@sun
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-14 17:25:04 -04:00
Avi Kivity 4dc0da8696 perf: Add context field to perf_event
The perf_event overflow handler does not receive any caller-derived
argument, so many callers need to resort to looking up the perf_event
in their local data structure.  This is ugly and doesn't scale if a
single callback services many perf_events.

Fix by adding a context parameter to perf_event_create_kernel_counter()
(and derived hardware breakpoints APIs) and storing it in the perf_event.
The field can be accessed from the callback as event->overflow_handler_context.
All callers are updated.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1309362157-6596-2-git-send-email-avi@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:38 +02:00
Peter Zijlstra a8b0ca17b8 perf: Remove the nmi parameter from the swevent and overflow interface
The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.

For the various event classes:

  - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
    the PMI-tail (ARM etc.)
  - tracepoint: nmi=0; since tracepoint could be from NMI context.
  - software: nmi=[0,1]; some, like the schedule thing cannot
    perform wakeups, and hence need 0.

As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).

The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:35 +02:00
Cyrill Gorcunov 1880c4ae18 perf, x86: Add hw_watchdog_set_attr() in a sake of nmi-watchdog on P4
Due to restriction and specifics of Netburst PMU we need a separated
event for NMI watchdog. In particular every Netburst event
consumes not just a counter and a config register, but also an
additional ESCR register.

Since ESCR registers are grouped upon counters (i.e. if ESCR is occupied
for some event there is no room for another event to enter until its
released) we need to pick up the "least" used ESCR (or the most available
one) for nmi-watchdog purposes -- so MSR_P4_CRU_ESCR2/3 was chosen.

With this patch nmi-watchdog and perf top should be able to run simultaneously.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
CC: Lin Ming <ming.m.lin@intel.com>
CC: Arnaldo Carvalho de Melo <acme@redhat.com>
CC: Frederic Weisbecker <fweisbec@gmail.com>
Tested-and-reviewed-by: Don Zickus <dzickus@redhat.com>
Tested-and-reviewed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110623124918.GC13050@sun
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:34 +02:00
Ingo Molnar 6e9101aeec watchdog: Fix non-standard prototype of get_softlockup_thresh()
This build warning slipped through:

  kernel/watchdog.c:102: warning: function declaration isn't a prototype

As reported by Stephen Rothwell.

Also address an unused variable warning that GCC 4.6.0 reports:
we cannot do anything about failed watchdog ops during CPU hotplug
(it's not serious enough to return an error from the notifier),
so ignore them.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20110524134129.8da27016.sfr@canb.auug.org.au
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20110517071642.GF22305@elte.hu>
2011-05-24 05:53:39 +02:00
Mandeep Singh Baines 4eec42f392 watchdog: Change the default timeout and configure nmi watchdog period based on watchdog_thresh
Before the conversion of the NMI watchdog to perf event, the
watchdog timeout was 5 seconds. Now it is 60 seconds. For my
particular application, netbooks, 5 seconds was a better
timeout. With a short timeout, we catch faults earlier and are
able to send back a panic. With a 60 second timeout, the user is
unlikely to wait and will instead hit the power button, causing
us to lose the panic info.

This change configures the NMI period to watchdog_thresh and
sets the softlockup_thresh to watchdog_thresh * 2. In addition,
watchdog_thresh was reduced to 10 seconds as suggested by Ingo
Molnar.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1306127423-3347-4-git-send-email-msb@chromium.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20110517071642.GF22305@elte.hu>
2011-05-23 11:58:59 +02:00
Mandeep Singh Baines 586692a5a5 watchdog: Disable watchdog when thresh is zero
This restores the previous behavior of softlock_thresh.

Currently, setting watchdog_thresh to zero causes the watchdog
kthreads to consume a lot of CPU.

In addition, the logic of proc_dowatchdog_thresh and
proc_dowatchdog_enabled has been factored into proc_dowatchdog.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1306127423-3347-3-git-send-email-msb@chromium.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20110517071018.GE22305@elte.hu>
2011-05-23 11:58:59 +02:00
Mandeep Singh Baines e04ab2bc41 watchdog: Only disable/enable watchdog if neccessary
Don't take any action on an unsuccessful write to /proc.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1306127423-3347-2-git-send-email-msb@chromium.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-23 11:58:58 +02:00
Mandeep Singh Baines 824c6b7f62 watchdog: Fix rounding bug in get_sample_period()
In get_sample_period(), softlockup_thresh is integer divided by
5 before the multiplication by NSEC_PER_SEC. This results in
softlockup_thresh being rounded down to the nearest integer
multiple of 5.

For example, a softlockup_thresh of 4 rounds down to 0.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1306127423-3347-1-git-send-email-msb@chromium.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-23 11:58:58 +02:00
Hillf Danton 1409f141ac kernel/watchdog.c: disable nmi perf event in the error path of enabling watchdog
In corner cases where softlockup watchdog is not setup successfully, the
relevant nmi perf event for hardlockup watchdog could be disabled, then
the status of the underlying hardware remains unchanged.

Also, if the kthread doesn't start then the hrtimer won't run and the
hardlockup detector will falsely fire.

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28 11:28:21 -07:00
Don Zickus f99a99330f kernel/watchdog.c: always return NOTIFY_OK during cpu up/down events
This patch addresses a couple of problems.  One was the case when the
hardlockup failed to start, it also failed to start the softlockup.  There
were valid cases when the hardlockup shouldn't start and that shouldn't
block the softlockup (no lapic, bios controls perf counters).

The second problem was when the hardlockup failed to start on boxes (from
a no lapic or bios controlled perf counter case), it reported failure to
the cpu notifier chain.  This blocked the notifier from continuing to
start other more critical pieces of cpu bring-up (in our case based on a
2.6.32 fork, it was the mce).  As a result, during soft cpu online/offline
testing, the system would panic when a cpu was offlined because the cpu
notifier would succeed in processing a watchdog disable cpu event and
would panic in the mce case as a result of un-initialized variables from a
never executed cpu up event.

I realized the hardlockup/softlockup cases are really just debugging aids
and should never impede the progress of a cpu up/down event.  Therefore I
modified the code to always return NOTIFY_OK and instead rely on printks
to inform the user of problems.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:12 -07:00
Don Zickus fef2c9bc1b kernel/watchdog.c: allow hardlockup to panic by default
When a cpu is considered stuck, instead of limping along and just printing
a warning, it is sometimes preferred to just panic, let kdump capture the
vmcore and reboot.  This gets the machine back into a stable state quickly
while saving the info that got it into a stuck state to begin with.

Add a Kconfig option to allow users to set the hardlockup to panic
by default.  Also add in a 'nmi_watchdog=nopanic' to override this.

[akpm@linux-foundation.org: fix strncmp length]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:12 -07:00
Don Zickus 5651f7f47d watchdog, nmi: Lower the severity of error messages
During boot if the hardlockup detector fails to initialize, it
complains very loudly.  Some failures should be expected under
certain situations, ie no lapics, or resource in-use.  Tone
those error messages down a bit.  Keep the rest at a high level.

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1297278153-21111-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-10 13:21:59 +01:00
Marcin Slusarz 9ffdc6c37d watchdog: Don't change watchdog state on read of sysctl
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
[ add {}'s to fix a warning ]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <1296230433-6261-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-31 13:22:43 +01:00
Marcin Slusarz 397357666d watchdog: Fix sysctl consistency
If it was not possible to enable watchdog for any cpu, switch
watchdog_enabled back to 0, because it's visible via
kernel.watchdog sysctl.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <1296230433-6261-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-31 13:22:43 +01:00
Marcin Slusarz 4135038a58 watchdog: Fix broken nowatchdog logic
Passing nowatchdog to kernel disables 2 things: creation of
watchdog threads AND initialization of percpu watchdog_hrtimer.
As hrtimers are initialized only at boot it's not possible to
enable watchdog later - for me all watchdog threads started to
eat 100% of CPU time, but they could just crash.

Additionally, even if these threads would start properly,
watchdog_disable_all_cpus was guarded by no_watchdog check, so
you couldn't disable watchdog.

To fix this, remove no_watchdog variable and use already
existing watchdog_enabled variable.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
[ removed another no_watchdog instance ]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <1296230433-6261-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-31 13:22:42 +01:00
Linus Torvalds 72eb6a7914 Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits)
  gameport: use this_cpu_read instead of lookup
  x86: udelay: Use this_cpu_read to avoid address calculation
  x86: Use this_cpu_inc_return for nmi counter
  x86: Replace uses of current_cpu_data with this_cpu ops
  x86: Use this_cpu_ops to optimize code
  vmstat: User per cpu atomics to avoid interrupt disable / enable
  irq_work: Use per cpu atomics instead of regular atomics
  cpuops: Use cmpxchg for xchg to avoid lock semantics
  x86: this_cpu_cmpxchg and this_cpu_xchg operations
  percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support
  percpu,x86: relocate this_cpu_add_return() and friends
  connector: Use this_cpu operations
  xen: Use this_cpu_inc_return
  taskstats: Use this_cpu_ops
  random: Use this_cpu_inc_return
  fs: Use this_cpu_inc_return in buffer.c
  highmem: Use this_cpu_xx_return() operations
  vmstat: Use this_cpu_inc_return for vm statistics
  x86: Support for this_cpu_add, sub, dec, inc_return
  percpu: Generic support for this_cpu_add, sub, dec, inc_return
  ...

Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c}
as per Tejun.
2011-01-07 17:02:58 -08:00
Linus Torvalds 65b2074f84 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
  sched: Change wait_for_completion_*_timeout() to return a signed long
  sched, autogroup: Fix reference leak
  sched, autogroup: Fix potential access to freed memory
  sched: Remove redundant CONFIG_CGROUP_SCHED ifdef
  sched: Fix interactivity bug by charging unaccounted run-time on entity re-weight
  sched: Move periodic share updates to entity_tick()
  printk: Use this_cpu_{read|write} api on printk_pending
  sched: Make pushable_tasks CONFIG_SMP dependant
  sched: Add 'autogroup' scheduling feature: automated per session task groups
  sched: Fix unregister_fair_sched_group()
  sched: Remove unused argument dest_cpu to migrate_task()
  mutexes, sched: Introduce arch_mutex_cpu_relax()
  sched: Add some clock info to sched_debug
  cpu: Remove incorrect BUG_ON
  cpu: Remove unused variable
  sched: Fix UP build breakage
  sched: Make task dump print all 15 chars of proc comm
  sched: Update tg->shares after cpu.shares write
  sched: Allow update_cfs_load() to update global load
  sched: Implement demand based update_cfs_load()
  ...
2011-01-06 10:23:33 -08:00
Ingo Molnar aef1b9cef7 Merge commit 'v2.6.37' into perf/core
Merge reason: Add the final .37 tree.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05 14:22:10 +01:00
Ingo Molnar 27066fd484 Merge commit 'v2.6.37' into sched/core
Merge reason: Merge the final .37 tree.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05 14:14:46 +01:00
Ben Hutchings 551423748a watchdog: Improve initialisation error message and documentation
The error message 'NMI watchdog failed to create perf event...'
does not make it clear that this is a fatal error for the
watchdog.  It also currently prints the error value as a
pointer, rather than extracting the error code with PTR_ERR().
Fix that.

Add a note to the description of the 'nowatchdog' kernel
parameter to associate it with this message.

Reported-by: Cesare Leonardi <celeonar@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: 599368@bugs.debian.org
Cc: 608138@bugs.debian.org
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org> # .37.x and later
LKML-Reference: <1294009362.3167.126.camel@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-03 05:25:52 +01:00
Christoph Lameter 909ea96468 core: Replace __get_cpu_var with __this_cpu_read if not used for an address.
__get_cpu_var() can be replaced with this_cpu_read and will then use a
single read instruction with implied address calculation to access the
correct per cpu instance.

However, the address of a per cpu variable passed to __this_cpu_read()
cannot be determined (since it's an implied address conversion through
segment prefixes).  Therefore apply this only to uses of __get_cpu_var
where the address of the variable is not used.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Hugh Dickins <hughd@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-17 15:07:19 +01:00
Don Zickus 5dc3055879 x86, NMI: Add back unknown_nmi_panic and nmi_watchdog sysctls
Originally adapted from Huang Ying's patch which moved the
unknown_nmi_panic to the traps.c file.  Because the old nmi
watchdog was deleted before this change happened, the
unknown_nmi_panic sysctl was lost.  This re-adds it.

Also, the nmi_watchdog sysctl was re-implemented and its
documentation updated accordingly.

Patch-inspired-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1291068437-5331-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-10 00:01:06 +01:00
Peter Zijlstra 004417a6d4 perf, arch: Cleanup perf-pmu init vs lockup-detector
The perf hardware pmu got initialized at various points in the boot,
some before early_initcall() some after (notably arch_initcall).

The problem is that the NMI lockup detector is ran from early_initcall()
and expects the hardware pmu to be present.

Sanitize this by moving all architecture hardware pmu implementations to
initialize at early_initcall() and move the lockup detector to an explicit
initcall right after that.

Cc: paulus <paulus@samba.org>
Cc: davem <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290707759.2145.119.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26 15:14:56 +01:00
Ingo Molnar 92fd4d4d67 Merge commit 'v2.6.37-rc2' into sched/core
Merge reason: Move to a .37-rc base.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 13:22:26 +01:00
David Daney 433039e97f watchdog: Fix section mismatch and potential undefined behavior.
Commit d9ca07a05c ("watchdog: Avoid kernel crash when disabling
watchdog") introduces a section mismatch.

Now that we reference no_watchdog from non-__init code it can no longer
be __initdata.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-05 17:45:35 -07:00
KOSAKI Motohiro fe7de49f9d sched: Make sched_param argument static in sched_setscheduler() callers
Andrew Morton pointed out almost all sched_setscheduler() callers are
using fixed parameters and can be converted to static.  It reduces runtime
memory use a little.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: James Morris <jmorris@namei.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-23 17:56:48 +02:00
Linus Torvalds 5d70f79b5e Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (163 commits)
  tracing: Fix compile issue for trace_sched_wakeup.c
  [S390] hardirq: remove pointless header file includes
  [IA64] Move local_softirq_pending() definition
  perf, powerpc: Fix power_pmu_event_init to not use event->ctx
  ftrace: Remove recursion between recordmcount and scripts/mod/empty
  jump_label: Add COND_STMT(), reducer wrappery
  perf: Optimize sw events
  perf: Use jump_labels to optimize the scheduler hooks
  jump_label: Add atomic_t interface
  jump_label: Use more consistent naming
  perf, hw_breakpoint: Fix crash in hw_breakpoint creation
  perf: Find task before event alloc
  perf: Fix task refcount bugs
  perf: Fix group moving
  irq_work: Add generic hardirq context callbacks
  perf_events: Fix transaction recovery in group_sched_in()
  perf_events: Fix bogus AMD64 generic TLB events
  perf_events: Fix bogus context time tracking
  tracing: Remove parent recording in latency tracer graph options
  tracing: Use one prologue for the preempt irqs off tracer function tracers
  ...
2010-10-21 12:54:49 -07:00
Thomas Gleixner 37eca0d64a Merge branch 'linus' into core/locking
Reason: Pull in the semaphore related changes

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-12 17:27:28 +02:00
Matt Helsley 38a81da220 perf events: Clean up pid passing
The kernel perf event creation path shouldn't use find_task_by_vpid()
because a vpid exists in a specific namespace. find_task_by_vpid() uses
current's pid namespace which isn't always the correct namespace to use
for the vpid in all the places perf_event_create_kernel_counter() (and
thus find_get_context()) is called.

The goal is to clean up pid namespace handling and prevent bugs like:

	https://bugzilla.kernel.org/show_bug.cgi?id=17281

Instead of using pids switch find_get_context() to use task struct
pointers directly. The syscall is responsible for resolving the pid to
a task struct. This moves the pid namespace resolution into the syscall
much like every other syscall that takes pid parameters.

Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robin Green <greenrd@greenrd.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
LKML-Reference: <a134e5e392ab0204961fd1a62c84a222bf5874a9.1284407763.git.matthltc@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:44:00 +02:00
Stephane Eranian d9ca07a05c watchdog: Avoid kernel crash when disabling watchdog
In case you boot with the watchdog disabled, i.e., nowatchdog, then,
if you try to disable it via /proc/sys/kernel/watchdog, you get
a kernel crash. The reason is that you are trying to cancel a hrtimer
which has never been initialized.

This patch fixes this by skipping execution of
watchdog_disable_all_cpus() when the watchdog is marked
disabled from boot.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4c8f7a23.cae9d80a.2c11.0bb4@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:43:58 +02:00
Ingo Molnar 2aa61274ef Merge branch 'perf/urgent' into perf/core
Merge reason: Pick up pending fixes before applying dependent new changes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 20:40:08 +02:00
Don Zickus 68d3f1d810 lockup_detector: Sync touch_*_watchdog back to old semantics
During my rewrite, the semantics of touch_nmi_watchdog and
touch_softlockup_watchdog changed enough to break some drivers
(mostly over preemptable regions).

These are cases where long delays on one CPU (due to
print_delay for example) can cause long delays on other
CPUs - so we must 'touch' the nmi_watchdog flag of those
other CPUs as well.

This change brings those touch_*_watchdog() functions back in line
with to how they used to work.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: peterz@infradead.org
Cc: fweisbec@gmail.com
LKML-Reference: <1283310009-22168-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-01 10:02:28 +02:00
Akinobu Mita 14416c35b6 lockup_detector: Remove unused panic_notifier
The panic notifer in lockup_detector just set did_panic to 1.
But did_panic is not used anywhere so we can just remove it.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: peterz@infradead.org
Cc: gorcunov@gmail.com
Cc: fweisbec@gmail.com
LKML-Reference: <1283310009-22168-4-git-send-email-dzickus@redhat.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-01 07:33:34 +02:00
Akinobu Mita eac243355a lockup_detector: Convert cpu notifier to return encapsulate errno value
By the commit e6bde73b07
("cpu-hotplug: return better errno on cpu hotplug failure"),
the cpu notifier can return encapsulate errno value, resulting
in more meaningful error codes for CPU hotplug failures.

This converts the cpu notifier to return encapsulate errno value
for the lockup_detector as well.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: peterz@infradead.org
Cc: gorcunov@gmail.com
Cc: fweisbec@gmail.com
LKML-Reference: <1283310009-22168-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-01 07:33:34 +02:00
Peter Zijlstra c6db67cda7 watchdog: Don't throttle the watchdog
Stephane reported that when the machine locks up, the regular ticks,
which are responsible to resetting the throttle count, stop too.

Hence the NMI watchdog can end up being throttled before it reports on
the locked up state, and we end up being sad..

Cure this by having the watchdog overflow reset its own throttle count.

Reported-by: Stephane Eranian <eranian@google.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1282215916.1926.4696.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-23 10:48:05 +02:00
Lin Ming 277b199800 lockup_detector: Make callback function static
watchdog_overflow_callback() is only used in kernel/watchdog.c.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
LKML-Reference: <1282273431.16443.32.camel@minggr.sh.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-20 10:09:41 +02:00
Kulikov Vasiliy eb703f9819 kernel/watchdog: Initialize 'result'
Variable on the stack is not initialized to zero, do it
explicitly.

This bug was found by a compiler warning:

 kernel/watchdog.c:463: warning: 'result' may be used uninitialized in this function

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1278316854-28442-1-git-send-email-segooon@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-07-07 08:46:42 +02:00
Don Zickus 26e09c6eee lockup_detector: Convert per_cpu to __get_cpu_var for readability
Just a bunch of conversions as suggested by Frederic W.
__get_cpu_var() provides preemption disabled checks.

Plus it gives more readability as it makes it obvious
we are dealing locally now with these vars.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <1274133966-18415-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-19 11:32:14 +02:00
Don Zickus cafcd80d21 lockup_detector: Cross arch compile fixes
Combining the softlockup and hardlockup code causes watchdog.c
to build even without the hardlockup detection support.

So if an arch, that has the previous and the new nmi watchdog
implementations cohabiting, wants to know if the generic one
is in use, CONFIG_LOCKUP_DETECTOR is not a reliable check.
We need to use CONFIG_HARDLOCKUP_DETECTOR instead.

Fixes:
	kernel/built-in.o: In function `touch_nmi_watchdog':
	(.text+0x449bc): multiple definition of `touch_nmi_watchdog'
	arch/sparc/kernel/built-in.o:(.text+0x11b28): first defined here

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <20100514151121.GR15159@redhat.com>
[ use CONFIG_HARDLOCKUP_DETECTOR instead of CONFIG_PERF_EVENTS_NMI]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-16 04:25:14 +02:00
Frederic Weisbecker 23637d477c lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR
This new config is deemed to simplify even more the lockup detector
dependencies and can make it easier to bring a smooth sorting
between archs that support the new generic lockup detector and those
that still have their own, especially for those that are in the
middle of this migration.

Instead of checking whether we have CONFIG_LOCKUP_DETECTOR +
CONFIG_PERF_EVENTS_NMI each time an arch wants to know if it needs
to build its own lockup detector, take a shortcut with this new
config. It is enabled only if the hardlockup detection part of
the whole lockup detector is on.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
2010-05-16 01:57:42 +02:00