The initially proposed KASAN command line parameters are redundant.
This change drops the complex "kasan.mode=off/prod/full" parameter and
adds a simpler kill switch "kasan=off/on" instead. The new parameter
together with the already existing ones provides a cleaner way to
express the same set of features.
The full set of parameters with this change:
kasan=off/on - whether KASAN is enabled
kasan.fault=report/panic - whether to only print a report or also panic
kasan.stacktrace=off/on - whether to collect alloc/free stack traces
Default values:
kasan=on
kasan.fault=report
kasan.stacktrace=on (if CONFIG_DEBUG_KERNEL=y)
kasan.stacktrace=off (otherwise)
Link: https://linux-review.googlesource.com/id/Ib3694ed90b1e8ccac6cf77dfd301847af4aba7b8
Link: https://lkml.kernel.org/r/4e9c4a4bdcadc168317deb2419144582a9be6e61.1610736745.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kasan_remove_zero_shadow() shall use original virtual address, start and
size, instead of shadow address.
Link: https://lkml.kernel.org/r/20210103063847.5963-1-lecopzer@gmail.com
Fixes: 0207df4fa1 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During testing kasan_populate_early_shadow and kasan_remove_zero_shadow,
if the shadow start and end address in kasan_remove_zero_shadow() is not
aligned to PMD_SIZE, the remain unaligned PTE won't be removed.
In the test case for kasan_remove_zero_shadow():
shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000
3-level page table:
PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K
0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in
kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next
address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE.
In the correct condition, this should fallback to the next level
kasan_remove_pmd_table() but the condition flow always continue to skip
the unaligned part.
Fix by correcting the condition when next and addr are neither aligned.
Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com
Fixes: 0207df4fa1 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The size of kasan_early_shadow_pte[] now is PTRS_PER_PTE which defined
to 512 for arm. This means that it only covers the prev Linux pte
entries, but not the HWTABLE pte entries for arm.
The reason it currently works is that the symbol kasan_early_shadow_page
immediately following kasan_early_shadow_pte in memory is page aligned,
which makes kasan_early_shadow_pte look like a 4KB size array. But we
can't ensure the order is always right with different compiler/linker,
or if more bss symbols are introduced.
We had a test with QEMU + vexpress：put a 512KB-size symbol with
attribute __section(".bss..page_aligned") after kasan_early_shadow_pte,
and poisoned it after kasan_early_init(). Then enabled CONFIG_KASAN, it
failed to boot up.
Link: https://lkml.kernel.org/r/20210109044622.8312-1-hailongliiu@yeah.net
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: Ziliang Guo <guo.ziliang@zte.com.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The reason cache merging is disabled with KASAN is because KASAN puts its
metadata right after the allocated object. When the merged caches have
slightly different sizes, the metadata ends up in different places, which
KASAN doesn't support.
It might be possible to adjust the metadata allocation algorithm and make
it friendly to the cache merging code. Instead this change takes a simpler
approach and allows merging caches when no metadata is present. Which is
the case for hardware tag-based KASAN with kasan.mode=prod.
Link: https://lkml.kernel.org/r/37497e940bfd4b32c0a93a702a9ae4cf061d5392.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ia114847dfb2244f297d2cb82d592bf6a07455dba
Co-developed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KASAN marks caches that are sanitized with the SLAB_KASAN cache flag.
Currently if the metadata that is appended after the object (stores e.g.
stack trace ids) doesn't fit into KMALLOC_MAX_SIZE (can only happen with
SLAB, see the comment in the patch), KASAN turns off sanitization
completely.
With this change sanitization of the object data is always enabled.
However the metadata is only stored when it fits. Instead of checking for
SLAB_KASAN flag accross the code to find out whether the metadata is
there, use cache->kasan_info.alloc/free_meta_offset. As 0 can be a valid
value for free_meta_offset, introduce KASAN_NO_FREE_META as an indicator
that the free metadata is missing.
Without this change all sanitized KASAN objects would be put into
quarantine with generic KASAN. With this change, only the objects that
have metadata (i.e. when it fits) are put into quarantine, the rest is
freed right away.
Along the way rework __kasan_cache_create() and add claryfying comments.
Link: https://lkml.kernel.org/r/aee34b87a5e4afe586c2ac6a0b32db8dc4dcc2dc.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Icd947e2bea054cb5cfbdc6cf6652227d97032dcb
Co-developed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
set_tag() already ignores the tag for the generic mode, so just call it
as is. Add a check for the generic mode to assign_tag(), and simplify its
call in ____kasan_kmalloc().
Link: https://lkml.kernel.org/r/121eeab245f98555862b289d2ba9269c868fbbcf.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I18905ca78fb4a3d60e1a34a4ca00247272480438
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Declare the kasan_enabled static key in include/linux/kasan.h and in
include/linux/mm.h and check it in all kasan annotations. This allows to
avoid any slowdown caused by function calls when kasan_enabled is
disabled.
Link: https://lkml.kernel.org/r/9f90e3c0aa840dbb4833367c2335193299f69023.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I2589451d3c96c97abbcbf714baabe6161c6f153e
Co-developed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hardware tag-based KASAN mode is intended to eventually be used in
production as a security mitigation. Therefore there's a need for finer
control over KASAN features and for an existence of a kill switch.
This change adds a few boot parameters for hardware tag-based KASAN that
allow to disable or otherwise control particular KASAN features.
The features that can be controlled are:
1. Whether KASAN is enabled at all.
2. Whether KASAN collects and saves alloc/free stacks.
3. Whether KASAN panics on a detected bug or not.
With this change a new boot parameter kasan.mode allows to choose one of
three main modes:
- kasan.mode=off - KASAN is disabled, no tag checks are performed
- kasan.mode=prod - only essential production features are enabled
- kasan.mode=full - all KASAN features are enabled
The chosen mode provides default control values for the features mentioned
above. However it's also possible to override the default values by
providing:
- kasan.stacktrace=off/on - enable alloc/free stack collection
(default: on for mode=full, otherwise off)
- kasan.fault=report/panic - only report tag fault or also panic
(default: report)
If kasan.mode parameter is not provided, it defaults to full when
CONFIG_DEBUG_KERNEL is enabled, and to prod otherwise.
It is essential that switching between these modes doesn't require
rebuilding the kernel with different configs, as this is required by
the Android GKI (Generic Kernel Image) initiative [1].
[1] https://source.android.com/devices/architecture/kernel/generic-kernel-image
[andreyknvl@google.com: don't use read-only static keys]
Link: https://lkml.kernel.org/r/f2ded589eba1597f7360a972226083de9afd86e2.1607537948.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/cb093613879d8d8841173f090133eddeb4c35f1f.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/If7d37003875b2ed3e0935702c8015c223d6416a4
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using (un)poison_range() or check_invalid_free() currently results in
function calls. Move their definitions to mm/kasan/kasan.h and turn them
into static inline functions for hardware tag-based mode to avoid
unneeded function calls.
Link: https://lkml.kernel.org/r/7007955b69eb31b5376a7dc1e0f4ac49138504f2.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ia9d8191024a12d1374675b3d27197f10193f50bb
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using random_tag() currently results in a function call. Move its
definition to mm/kasan/kasan.h and turn it into a static inline function
for hardware tag-based mode to avoid uneeded function calls.
Link: https://lkml.kernel.org/r/be438471690e351e1d792e6bb432e8c03ccb15d3.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Iac5b2faf9a912900e16cca6834d621f5d4abf427
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using kasan_reset_tag() currently results in a function call. As it's
called quite often from the allocator code, this leads to a noticeable
slowdown. Move it to include/linux/kasan.h and turn it into a static
inline function. Also remove the now unneeded reset_tag() internal KASAN
macro and use kasan_reset_tag() instead.
Link: https://lkml.kernel.org/r/6940383a3a9dfb416134d338d8fac97a9ebb8686.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I4d2061acfe91d480a75df00b07c22d8494ef14b5
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's no need for __kasan_unpoison_stack() helper, as it's only
currently used in a single place. Removing it also removes unneeded
arithmetic.
No functional changes.
Link: https://lkml.kernel.org/r/93e78948704a42ea92f6248ff8a725613d721161.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ie5ba549d445292fe629b4a96735e4034957bcc50
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's a config option CONFIG_KASAN_STACK that has to be enabled for
KASAN to use stack instrumentation and perform validity checks for
stack variables.
There's no need to unpoison stack when CONFIG_KASAN_STACK is not enabled.
Only call kasan_unpoison_task_stack[_below]() when CONFIG_KASAN_STACK is
enabled.
Note, that CONFIG_KASAN_STACK is an option that is currently always
defined when CONFIG_KASAN is enabled, and therefore has to be tested
with #if instead of #ifdef.
Link: https://lkml.kernel.org/r/d09dd3f8abb388da397fd11598c5edeaa83fe559.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/If8a891e9fe01ea543e00b576852685afec0887e3
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kasan: boot parameters for hardware tag-based mode", v4.
=== Overview
Hardware tag-based KASAN mode [1] is intended to eventually be used in
production as a security mitigation. Therefore there's a need for finer
control over KASAN features and for an existence of a kill switch.
This patchset adds a few boot parameters for hardware tag-based KASAN that
allow to disable or otherwise control particular KASAN features, as well
as provides some initial optimizations for running KASAN in production.
There's another planned patchset what will further optimize hardware
tag-based KASAN, provide proper benchmarking and tests, and will fully
enable tag-based KASAN for production use.
Hardware tag-based KASAN relies on arm64 Memory Tagging Extension (MTE)
[2] to perform memory and pointer tagging. Please see [3] and [4] for
detailed analysis of how MTE helps to fight memory safety problems.
The features that can be controlled are:
1. Whether KASAN is enabled at all.
2. Whether KASAN collects and saves alloc/free stacks.
3. Whether KASAN panics on a detected bug or not.
The patch titled "kasan: add and integrate kasan boot parameters" of this
series adds a few new boot parameters.
kasan.mode allows to choose one of three main modes:
- kasan.mode=off - KASAN is disabled, no tag checks are performed
- kasan.mode=prod - only essential production features are enabled
- kasan.mode=full - all KASAN features are enabled
The chosen mode provides default control values for the features mentioned
above. However it's also possible to override the default values by
providing:
- kasan.stacktrace=off/on - enable stacks collection
(default: on for mode=full, otherwise off)
- kasan.fault=report/panic - only report tag fault or also panic
(default: report)
If kasan.mode parameter is not provided, it defaults to full when
CONFIG_DEBUG_KERNEL is enabled, and to prod otherwise.
It is essential that switching between these modes doesn't require
rebuilding the kernel with different configs, as this is required by
the Android GKI (Generic Kernel Image) initiative.
=== Benchmarks
For now I've only performed a few simple benchmarks such as measuring
kernel boot time and slab memory usage after boot. There's an upcoming
patchset which will optimize KASAN further and include more detailed
benchmarking results.
The benchmarks were performed in QEMU and the results below exclude the
slowdown caused by QEMU memory tagging emulation (as it's different from
the slowdown that will be introduced by hardware and is therefore
irrelevant).
KASAN_HW_TAGS=y + kasan.mode=off introduces no performance or memory
impact compared to KASAN_HW_TAGS=n.
kasan.mode=prod (manually excluding tagging) introduces 3% of performance
and no memory impact (except memory used by hardware to store tags)
compared to kasan.mode=off.
kasan.mode=full has about 40% performance and 30% memory impact over
kasan.mode=prod. Both come from alloc/free stack collection.
=== Notes
This patchset is available here:
https://github.com/xairy/linux/tree/up-boot-mte-v4
This patchset is based on v11 of "kasan: add hardware tag-based mode for
arm64" patchset [1].
For testing in QEMU hardware tag-based KASAN requires:
1. QEMU built from master [6] (use "-machine virt,mte=on -cpu max" arguments
to run).
2. GCC version 10.
[1] https://lore.kernel.org/linux-arm-kernel/cover.1606161801.git.andreyknvl@google.com/T/#t
[2] https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/enhancing-memory-safety
[3] https://arxiv.org/pdf/1802.09517.pdf
[4] https://github.com/microsoft/MSRC-Security-Research/blob/master/papers/2020/Security%20analysis%20of%20memory%20tagging.pdf
[5] https://source.android.com/devices/architecture/kernel/generic-kernel-image
[6] https://github.com/qemu/qemu
=== Tags
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
This patch (of 19):
Move get_free_info() call into quarantine_put() to simplify the call site.
No functional changes.
Link: https://lkml.kernel.org/r/cover.1606162397.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/312d0a3ef92cc6dc4fa5452cbc1714f9393ca239.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Iab0f04e7ebf8d83247024b7190c67c3c34c7940f
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add error reporting for hardware tag-based KASAN. When
CONFIG_KASAN_HW_TAGS is enabled, print KASAN report from the arm64 tag
fault handler.
SAS bits aren't set in ESR for all faults reported in EL1, so it's
impossible to find out the size of the access the caused the fault. Adapt
KASAN reporting code to handle this case.
Link: https://lkml.kernel.org/r/b559c82b6a969afedf53b4694b475f0234067a1a.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide implementation of KASAN functions required for the hardware
tag-based mode. Those include core functions for memory and pointer
tagging (tags_hw.c) and bug reporting (report_tags_hw.c). Also adapt
common KASAN code to support the new mode.
Link: https://lkml.kernel.org/r/cfd0fbede579a6b66755c98c88c108e54f9c56bf.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch add a set of arch_*() memory tagging helpers currently only
defined for arm64 when hardware tag-based KASAN is enabled. These helpers
will be used by KASAN runtime to implement the hardware tag-based mode.
The arch-level indirection level is introduced to simplify adding hardware
tag-based KASAN support for other architectures in the future by defining
the appropriate arch_*() macros.
Link: https://lkml.kernel.org/r/fc9e5bb71201c03131a2fc00a74125723568dda9.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
Rework print_memory_metadata() to make it agnostic with regard to the way
metadata is stored. Allow providing a separate metadata_fetch_row()
implementation for each KASAN mode. Hardware tag-based KASAN will provide
its own implementation that doesn't use shadow memory.
No functional changes for software modes.
Link: https://lkml.kernel.org/r/5fb1ec0152bb1f521505017800387ec3e36ffe18.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
Hardware tag-based KASAN won't be using shadow memory, but will reuse
these macros. Rename "SHADOW" to implementation-neutral "META".
No functional changes.
Link: https://lkml.kernel.org/r/f96244ec59dc17db35173ec352c5592b14aefaf8.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
Hardware tag-based KASAN won't be using shadow memory, but will reuse this
function. Rename "shadow" to implementation-neutral "metadata".
No functional changes.
Link: https://lkml.kernel.org/r/dd955c5aadaee16aef451a6189d19172166a23f5.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
Hardware tag-based KASAN won't be using shadow memory, but will reuse this
function. Rename "shadow" to implementation-neutral "metadata".
No functional changes.
Link: https://lkml.kernel.org/r/370466fba590a4596b55ffd38adfd990f8886db4.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Software tag-based KASAN mode is fully initialized with kasan_init_tags(),
while the generic mode only requires kasan_init(). Move the
initialization message for tag-based mode into kasan_init_tags().
Also fix pr_fmt() usage for KASAN code: generic.c doesn't need it as it
doesn't use any printing functions; tag-based mode should use "kasan:"
instead of KBUILD_MODNAME (which stands for file name).
Link: https://lkml.kernel.org/r/29a30ea4e1750450dd1f693d25b7b6cb05913ecf.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
Hardware tag-based KASAN won't use kasan_depth. Only define and use it
when one of the software KASAN modes are enabled.
No functional changes for software modes.
Link: https://lkml.kernel.org/r/e16f15aeda90bc7fb4dfc2e243a14b74cc5c8219.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
For software KASAN modes the check is based on the value in the shadow
memory. Hardware tag-based KASAN won't be using shadow, so hide the
implementation of the check in check_invalid_free().
Also simplify the code for software tag-based mode.
No functional changes for software modes.
Link: https://lkml.kernel.org/r/d01534a4b977f97d87515dc590e6348e1406de81.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename generic_report.c to report_generic.c and tags_report.c to
report_sw_tags.c, as their content is more relevant to report.c file.
Also rename tags.c to sw_tags.c to better reflect that this file contains
code for software tag-based mode.
No functional changes.
Link: https://lkml.kernel.org/r/a6105d416da97d389580015afed66c4c3cfd4c08.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Define KASAN_MEMORY_PER_SHADOW_PAGE as (KASAN_GRANULE_SIZE << PAGE_SHIFT),
which is the same as (KASAN_GRANULE_SIZE * PAGE_SIZE) for software modes
that use shadow memory, and use it across KASAN code to simplify it.
Link: https://lkml.kernel.org/r/8329391cfe14b5cffd3decf3b5c535b6ce21eef6.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
The new mode won't be using shadow memory. Move all shadow-related code
to shadow.c, which is only enabled for software KASAN modes that use
shadow memory.
No functional changes for software modes.
Link: https://lkml.kernel.org/r/17d95cfa7d5cf9c4fcd9bf415f2a8dea911668df.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
The new mode won't be using shadow memory, so only build init.c that
contains shadow initialization code for software modes.
No functional changes for software modes.
Link: https://lkml.kernel.org/r/bae0a6a35b7a9b1a443803c1a55e6e3fecc311c9.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
The new mode won't be using shadow memory, but will still use the concept
of memory granules. Each memory granule maps to a single metadata entry:
8 bytes per one shadow byte for generic mode, 16 bytes per one shadow byte
for software tag-based mode, and 16 bytes per one allocation tag for
hardware tag-based mode.
Rename KASAN_SHADOW_SCALE_SIZE to KASAN_GRANULE_SIZE, and
KASAN_SHADOW_MASK to KASAN_GRANULE_MASK.
Also use MASK when used as a mask, otherwise use SIZE.
No functional changes.
Link: https://lkml.kernel.org/r/939b5754e47f528a6e6a6f28ffc5815d8d128033.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
Group all vmalloc-related function declarations in include/linux/kasan.h,
and their implementations in mm/kasan/common.c.
No functional changes.
Link: https://lkml.kernel.org/r/80a6fdd29b039962843bd6cf22ce2643a7c8904e.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kasan: add hardware tag-based mode for arm64", v11.
This patchset adds a new hardware tag-based mode to KASAN [1]. The new
mode is similar to the existing software tag-based KASAN, but relies on
arm64 Memory Tagging Extension (MTE) [2] to perform memory and pointer
tagging (instead of shadow memory and compiler instrumentation).
This patchset is co-developed and tested by
Vincenzo Frascino <vincenzo.frascino@arm.com>.
This patchset is available here:
https://github.com/xairy/linux/tree/up-kasan-mte-v11
For testing in QEMU hardware tag-based KASAN requires:
1. QEMU built from master [4] (use "-machine virt,mte=on -cpu max" arguments
to run).
2. GCC version 10.
[1] https://www.kernel.org/doc/html/latest/dev-tools/kasan.html
[2] https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/enhancing-memory-safety
[3] git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux for-next/mte
[4] https://github.com/qemu/qemu
====== Overview
The underlying ideas of the approach used by hardware tag-based KASAN are:
1. By relying on the Top Byte Ignore (TBI) arm64 CPU feature, pointer tags
are stored in the top byte of each kernel pointer.
2. With the Memory Tagging Extension (MTE) arm64 CPU feature, memory tags
for kernel memory allocations are stored in a dedicated memory not
accessible via normal instuctions.
3. On each memory allocation, a random tag is generated, embedded it into
the returned pointer, and the corresponding memory is tagged with the
same tag value.
4. With MTE the CPU performs a check on each memory access to make sure
that the pointer tag matches the memory tag.
5. On a tag mismatch the CPU generates a tag fault, and a KASAN report is
printed.
Same as other KASAN modes, hardware tag-based KASAN is intended as a
debugging feature at this point.
====== Rationale
There are two main reasons for this new hardware tag-based mode:
1. Previously implemented software tag-based KASAN is being successfully
used on dogfood testing devices due to its low memory overhead (as
initially planned). The new hardware mode keeps the same low memory
overhead, and is expected to have significantly lower performance
impact, due to the tag checks being performed by the hardware.
Therefore the new mode can be used as a better alternative in dogfood
testing for hardware that supports MTE.
2. The new mode lays the groundwork for the planned in-kernel MTE-based
memory corruption mitigation to be used in production.
====== Technical details
Considering the implementation perspective, hardware tag-based KASAN is
almost identical to the software mode. The key difference is using MTE
for assigning and checking tags.
Compared to the software mode, the hardware mode uses 4 bits per tag, as
dictated by MTE. Pointer tags are stored in bits [56:60), the top 4 bits
have the normal value 0xF. Having less distict tags increases the
probablity of false negatives (from ~1/256 to ~1/16) in certain cases.
Only synchronous exceptions are set up and used by hardware tag-based KASAN.
====== Benchmarks
Note: all measurements have been performed with software emulation of Memory
Tagging Extension, performance numbers for hardware tag-based KASAN on the
actual hardware are expected to be better.
Boot time [1]:
* 2.8 sec for clean kernel
* 5.7 sec for hardware tag-based KASAN
* 11.8 sec for software tag-based KASAN
* 11.6 sec for generic KASAN
Slab memory usage after boot [2]:
* 7.0 kb for clean kernel
* 9.7 kb for hardware tag-based KASAN
* 9.7 kb for software tag-based KASAN
* 41.3 kb for generic KASAN
Measurements have been performed with:
* defconfig-based configs
* Manually built QEMU master
* QEMU arguments: -machine virt,mte=on -cpu max
* CONFIG_KASAN_STACK_ENABLE disabled
* CONFIG_KASAN_INLINE enabled
* clang-10 as the compiler and gcc-10 as the assembler
[1] Time before the ext4 driver is initialized.
[2] Measured as `cat /proc/meminfo | grep Slab`.
====== Notes
The cover letter for software tag-based KASAN patchset can be found here:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0116523cfffa62aeb5aa3b85ce7419f3dae0c1b8
===== Tags
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
This patch (of 41):
Don't mention "GNU General Public License version 2" text explicitly, as
it's already covered by the SPDX-License-Identifier.
Link: https://lkml.kernel.org/r/cover.1606161801.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/6ea9f5f4aa9dbbffa0d0c0a780b37699a4531034.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The aux_stack[2] is reused to record the call_rcu() call stack and
enqueuing work call stacks. So that we need to change the auxiliary stack
title for common title, print them in KASAN report.
Link: https://lkml.kernel.org/r/20201203022715.30635-1-walter-zh.wu@mediatek.com
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We hit this issue in our internal test. When enabling generic kasan, a
kfree()'d object is put into per-cpu quarantine first. If the cpu goes
offline, object still remains in the per-cpu quarantine. If we call
kmem_cache_destroy() now, slub will report "Objects remaining" error.
=============================================================================
BUG test_module_slab (Not tainted): Objects remaining in test_module_slab on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Slab 0x(____ptrval____) objects=34 used=1 fp=0x(____ptrval____) flags=0x2ffff00000010200
CPU: 3 PID: 176 Comm: cat Tainted: G B 5.10.0-rc1-00007-g4525c8781ec0-dirty #10
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x2b0
show_stack+0x18/0x68
dump_stack+0xfc/0x168
slab_err+0xac/0xd4
__kmem_cache_shutdown+0x1e4/0x3c8
kmem_cache_destroy+0x68/0x130
test_version_show+0x84/0xf0
module_attr_show+0x40/0x60
sysfs_kf_seq_show+0x128/0x1c0
kernfs_seq_show+0xa0/0xb8
seq_read+0x1f0/0x7e8
kernfs_fop_read+0x70/0x338
vfs_read+0xe4/0x250
ksys_read+0xc8/0x180
__arm64_sys_read+0x44/0x58
el0_svc_common.constprop.0+0xac/0x228
do_el0_svc+0x38/0xa0
el0_sync_handler+0x170/0x178
el0_sync+0x174/0x180
INFO: Object 0x(____ptrval____) @offset=15848
INFO: Allocated in test_version_show+0x98/0xf0 age=8188 cpu=6 pid=172
stack_trace_save+0x9c/0xd0
set_track+0x64/0xf0
alloc_debug_processing+0x104/0x1a0
___slab_alloc+0x628/0x648
__slab_alloc.isra.0+0x2c/0x58
kmem_cache_alloc+0x560/0x588
test_version_show+0x98/0xf0
module_attr_show+0x40/0x60
sysfs_kf_seq_show+0x128/0x1c0
kernfs_seq_show+0xa0/0xb8
seq_read+0x1f0/0x7e8
kernfs_fop_read+0x70/0x338
vfs_read+0xe4/0x250
ksys_read+0xc8/0x180
__arm64_sys_read+0x44/0x58
el0_svc_common.constprop.0+0xac/0x228
kmem_cache_destroy test_module_slab: Slab cache still has objects
Register a cpu hotplug function to remove all objects in the offline
per-cpu quarantine when cpu is going offline. Set a per-cpu variable to
indicate this cpu is offline.
[qiang.zhang@windriver.com: fix slab double free when cpu-hotplug]
Link: https://lkml.kernel.org/r/20201204102206.20237-1-qiang.zhang@windriver.com
Link: https://lkml.kernel.org/r/1606895585-17382-2-git-send-email-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Guangye Yang <guangye.yang@mediatek.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: Qian Cai <qcai@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KASAN errors will currently trigger a panic when panic_on_warn is set.
This renders kasan_multishot useless, as further KASAN errors won't be
reported if the kernel has already paniced. By making kasan_multishot
disable this behaviour for KASAN errors, we can still have the benefits of
panic_on_warn for non-KASAN warnings, yet be able to use kasan_multishot.
This is particularly important when running KASAN tests, which need to
trigger multiple KASAN errors: previously these would panic the system if
panic_on_warn was set, now they can run (and will panic the system should
non-KASAN warnings show up).
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Patricia Alfonso <trishalfonso@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200915035828.570483-6-davidgow@google.com
Link: https://lkml.kernel.org/r/20200910070331.3358048-6-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Integrate KASAN into KUnit testing framework.
- Fail tests when KASAN reports an error that is not expected
- Use KUNIT_EXPECT_KASAN_FAIL to expect a KASAN error in KASAN
tests
- Expected KASAN reports pass tests and are still printed when run
without kunit_tool (kunit_tool still bypasses the report due to the
test passing)
- KUnit struct in current task used to keep track of the current
test from KASAN code
Make use of "[PATCH v3 kunit-next 1/2] kunit: generalize kunit_resource
API beyond allocated resources" and "[PATCH v3 kunit-next 2/2] kunit: add
support for named resources" from Alan Maguire [1]
- A named resource is added to a test when a KASAN report is
expected
- This resource contains a struct for kasan_data containing
booleans representing if a KASAN report is expected and if a
KASAN report is found
[1] (https://lore.kernel.org/linux-kselftest/1583251361-12748-1-git-send-email-alan.maguire@oracle.com/T/#t)
Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200915035828.570483-3-davidgow@google.com
Link: https://lkml.kernel.org/r/20200910070331.3358048-3-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=bkNQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
kasan_unpoison_stack_above_sp_to() is defined in kasan code but never
used. The function was introduced as part of the commit:
commit 9f7d416c36 ("kprobes: Unpoison stack in jprobe_return() for KASAN")
... where it was necessary because x86's jprobe_return() would leave
stale shadow on the stack, and was an oddity in that regard.
Since then, jprobes were removed entirely, and as of commit:
commit 80006dbee6 ("kprobes/x86: Remove jprobe implementation")
... there have been no callers of this function.
Remove the declaration and the implementation.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/20200706143505.23299-1-vincenzo.frascino@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move free track from kasan_alloc_meta to kasan_free_meta in order to make
struct kasan_alloc_meta and kasan_free_meta size are both 16 bytes. It is
a good size because it is the minimal redzone size and a good number of
alignment.
For free track, we make some modifications as shown below:
1) Remove the free_track from struct kasan_alloc_meta.
2) Add the free_track into struct kasan_free_meta.
3) Add a macro KASAN_KMALLOC_FREETRACK in order to check whether
it can print free stack in KASAN report.
[1]https://bugzilla.kernel.org/show_bug.cgi?id=198437
[walter-zh.wu@mediatek.com: build fix]
Link: http://lkml.kernel.org/r/20200710162440.23887-1-walter-zh.wu@mediatek.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Co-developed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Link: http://lkml.kernel.org/r/20200601051022.1230-1-walter-zh.wu@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kasan: memorize and print call_rcu stack", v8.
This patchset improves KASAN reports by making them to have call_rcu()
call stack information. It is useful for programmers to solve
use-after-free or double-free memory issue.
The KASAN report was as follows(cleaned up slightly):
BUG: KASAN: use-after-free in kasan_rcu_reclaim+0x58/0x60
Freed by task 0:
kasan_save_stack+0x24/0x50
kasan_set_track+0x24/0x38
kasan_set_free_info+0x18/0x20
__kasan_slab_free+0x10c/0x170
kasan_slab_free+0x10/0x18
kfree+0x98/0x270
kasan_rcu_reclaim+0x1c/0x60
Last call_rcu():
kasan_save_stack+0x24/0x50
kasan_record_aux_stack+0xbc/0xd0
call_rcu+0x8c/0x580
kasan_rcu_uaf+0xf4/0xf8
Generic KASAN will record the last two call_rcu() call stacks and print up
to 2 call_rcu() call stacks in KASAN report. it is only suitable for
generic KASAN.
This feature considers the size of struct kasan_alloc_meta and
kasan_free_meta, we try to optimize the structure layout and size, lets it
get better memory consumption.
[1]https://bugzilla.kernel.org/show_bug.cgi?id=198437
[2]https://groups.google.com/forum/#!searchin/kasan-dev/better$20stack$20traces$20for$20rcu%7Csort:date/kasan-dev/KQsjT_88hDE/7rNUZprRBgAJ
This patch (of 4):
This feature will record the last two call_rcu() call stacks and prints up
to 2 call_rcu() call stacks in KASAN report.
When call_rcu() is called, we store the call_rcu() call stack into slub
alloc meta-data, so that the KASAN report can print rcu stack.
[1]https://bugzilla.kernel.org/show_bug.cgi?id=198437
[2]https://groups.google.com/forum/#!searchin/kasan-dev/better$20stack$20traces$20for$20rcu%7Csort:date/kasan-dev/KQsjT_88hDE/7rNUZprRBgAJ
[walter-zh.wu@mediatek.com: build fix]
Link: http://lkml.kernel.org/r/20200710162401.23816-1-walter-zh.wu@mediatek.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: http://lkml.kernel.org/r/20200710162123.23713-1-walter-zh.wu@mediatek.com
Link: http://lkml.kernel.org/r/20200601050847.1096-1-walter-zh.wu@mediatek.com
Link: http://lkml.kernel.org/r/20200601050927.1153-1-walter-zh.wu@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Konovalov
Lecopzer Chen
Hailong Liu
Walter Wu
Kuan-Ying Lee
David Gow
Patricia Alfonso
Linus Torvalds
Vincenzo Frascino