Граф коммитов

7 Коммитов

Автор SHA1 Сообщение Дата
Eddie James 6021c48f3a dt-bindings: fsi: Add P9 OCC device documentation
Document the bindings for the FSI-attached POWER9 On-Chip Controller.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-12-02 16:25:28 -08:00
Benjamin Herrenschmidt e13c542d52 dt-bindings: fsi: Add optional chip-id to CFAMs
This represents a physical chip in the system and allows
a stable numbering scheme to be passed to udev for userspace
to recognize which chip is which.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Rob Herring <robh@kernel.org>
2018-07-23 16:27:32 +10:00
Benjamin Herrenschmidt 2be5263c5d dt-bindings: fsi: Document binding for the fsi-master-ast-cf "device"
This isn't per-se a real device, it's a pseudo-device that
represents the use of the Aspeed built-in ColdFire to
implement the FSI protocol by bitbanging the GPIOs instead
of doing it from the ARM core.

Thus it's a drop-in replacement for the existing
fsi-master-gpio pseudo-device for use on systems based
on the Aspeed chips. It has most of the same properties,
plus some more needed to operate the coprocessor.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Rob Herring <robh@kernel.org>
2018-07-23 15:22:45 +10:00
Benjamin Herrenschmidt b4fb3aa5b9 dt-bindings: fsi-master-gpio: Document "no-gpio-delays" property
Support for this is being added to the driver but the original
patch forgot to add this documentation.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-05-31 12:12:38 -05:00
Christopher Bostic dd79873923 dt-bindings: fsi: Add optional property no-scan-on-init
Add an optional FSI master property 'no-scan-on-init.  This
can be specified to indicate that a master should not be
automatically scanned at init time.  This is required in cases
where a scan could interfere with another FSI master on the same
bus.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:11:01 +01:00
Jeremy Kerr 889ee9fe47 dt-bindings: fsi: Add specification for FSI busses
This change introduces a proposed layout for describing FSI busses in
the device tree. While the bus is probe-able, we'd still like a method
of describing subordinate (eg i2c) busses that are behind FSI devices.

The FSI core will be responsible for matching probed slaves & engines to
their device tree nodes, so the FSI device drivers' probe() functions
will be passed a struct device with the appropriate of_node populated
where a matching DT node is found.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Acked-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Acked-by: Eddie James <eajames@linux.vnet.ibm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:11:00 +01:00
Christopher Bostic 777dcf7391 drivers/fsi: Add documentation for GPIO bindings
Add fsi master gpio device tree binding documentation.

Includes changes from Jeremy Kerr <jk@ozlabs.org>.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:08 +02:00