The second loop of syslog_print_all() subtracts lengths that were
added in the first loop. With commit b031a684bf ("printk: remove
logbuf_lock writer-protection of ringbuffer") it is possible that
records are (over)written during syslog_print_all(). This allows the
possibility of the second loop subtracting lengths that were never
added in the first loop.
This situation can result in syslog_print_all() filling the buffer
starting from a later record, even though there may have been room
to fit the earlier record(s) as well.
Fixes: b031a684bf ("printk: remove logbuf_lock writer-protection of ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-4-john.ogness@linutronix.de
If message sizes average larger than expected (more than 32
characters), the data_ring will wrap before the desc_ring. Once the
data_ring wraps, it will start invalidating descriptors. These
invalid descriptors hang around until they are eventually recycled
when the desc_ring wraps. Readers do not care about invalid
descriptors, but they still need to iterate past them. If the
average message size is much larger than 32 characters, then there
will be many invalid descriptors preceding the valid descriptors.
The function prb_first_valid_seq() always begins at the oldest
descriptor and searches for the first valid descriptor. This can
be rather expensive for the above scenario. And, in fact, because
of its heavy usage in /dev/kmsg, there have been reports of long
delays and even RCU stalls.
For code that does not need to search from the oldest record,
replace prb_first_valid_seq() usage with prb_read_valid_*()
functions, which provide a start sequence number to search from.
Fixes: 896fbe20b4 ("printk: use the lockless ringbuffer")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: J. Avila <elavila@google.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210211173152.1629-1-john.ogness@linutronix.de
printk_safe_flush_on_panic() caused the following deadlock on our
server:
CPU0: CPU1:
panic rcu_dump_cpu_stacks
kdump_nmi_shootdown_cpus nmi_trigger_cpumask_backtrace
register_nmi_handler(crash_nmi_callback) printk_safe_flush
__printk_safe_flush
raw_spin_lock_irqsave(&read_lock)
// send NMI to other processors
apic_send_IPI_allbutself(NMI_VECTOR)
// NMI interrupt, dead loop
crash_nmi_callback
printk_safe_flush_on_panic
printk_safe_flush
__printk_safe_flush
// deadlock
raw_spin_lock_irqsave(&read_lock)
DEADLOCK: read_lock is taken on CPU1 and will never get released.
It happens when panic() stops a CPU by NMI while it has been in
the middle of printk_safe_flush().
Handle the lock the same way as logbuf_lock. The printk_safe buffers
are flushed only when both locks can be safely taken. It can avoid
the deadlock _in this particular case_ at expense of losing contents
of printk_safe buffers.
Note: It would actually be safe to re-init the locks when all CPUs were
stopped by NMI. But it would require passing this information
from arch-specific code. It is not worth the complexity.
Especially because logbuf_lock and printk_safe buffers have been
obsoleted by the lockless ring buffer.
Fixes: cf9b1106c8 ("printk/nmi: flush NMI messages on the system panic")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: <stable@vger.kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210210034823.64867-1-songmuchun@bytedance.com
The command 'find ./kernel/printk/ | xargs ./scripts/kernel-doc -none'
reported a mismatch with the kernel-doc of prb_rec_init_wr().
Rectify the kernel-doc, such that no issues remain for ./kernel/printk/.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210125081748.19903-1-lukas.bulwahn@gmail.com
Commit f0e386ee0c ("printk: fix buffer overflow potential for
print_text()") added string termination in record_print_text().
However it used the wrong base pointer for adding the terminator.
This led to a 0-byte being written somewhere beyond the buffer.
Use the correct base pointer when adding the terminator.
Fixes: f0e386ee0c ("printk: fix buffer overflow potential for print_text()")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210124202728.4718-1-john.ogness@linutronix.de
Before the commit 896fbe20b4 ("printk: use the lockless
ringbuffer"), msg_print_text() would only write up to size-1 bytes
into the provided buffer. Some callers expect this behavior and
append a terminator to returned string. In particular:
arch/powerpc/xmon/xmon.c:dump_log_buf()
arch/um/kernel/kmsg_dump.c:kmsg_dumper_stdout()
msg_print_text() has been replaced by record_print_text(), which
currently fills the full size of the buffer. This causes a
buffer overflow for the above callers.
Change record_print_text() so that it will only use size-1 bytes
for text data. Also, for paranoia sakes, add a terminator after
the text data.
And finally, document this behavior so that it is clear that only
size-1 bytes are used and a terminator is added.
Fixes: 896fbe20b4 ("printk: use the lockless ringbuffer")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210114170412.4819-1-john.ogness@linutronix.de
kmsg_dump_get_buffer() uses @syslog to determine if the syslog
prefix should be written to the buffer. However, when calculating
the maximum number of records that can fit into the buffer, it
always counts the bytes from the syslog prefix.
Use @syslog when calculating the maximum number of records that can
fit into the buffer.
Fixes: e2ae715d66 ("kmsg - kmsg_dump() use iterator to receive log buffer content")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210113164413.1599-1-john.ogness@linutronix.de
Counting text lines in a record simply involves counting the number
of newline characters (+1). However, it is searching the full data
block for newline characters, even though the text data can be (and
often is) a subset of that area. Since the extra area in the data
block was never initialized, the result is that extra newlines may
be seen and counted.
Restrict newline searching to the text data length.
Fixes: b6cf8b3f33 ("printk: add lockless ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210113144234.6545-1-john.ogness@linutronix.de
-----BEGIN PGP SIGNATURE-----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=1gUa
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Finally allow parallel writes and reads into/from the lockless
ringbuffer. But it is not a complete solution. Readers are still
serialized against each other. And nested writes are still prevented
by printk_safe per-CPU buffers.
- Use ttynull as the ultimate fallback for /dev/console.
- Officially allow disabling console output by using console="" or
console=null
- A few code cleanups
* tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: remove logbuf_lock writer-protection of ringbuffer
printk: inline log_output(),log_store() in vprintk_store()
printk: remove obsolete dead assignment
printk/console: Allow to disable console output by using console="" or console=null
init/console: Use ttynull as a fallback when there is no console
printk: ringbuffer: Reference text_data_ring directly in callees.
- migrate_disable/enable() support which originates from the RT tree and
is now a prerequisite for the new preemptible kmap_local() API which aims
to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=Oz1V
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
Since the ringbuffer is lockless, there is no need for it to be
protected by @logbuf_lock. Remove @logbuf_lock writer-protection of
the ringbuffer. The reader-protection is not removed because some
variables, used by readers, are using @logbuf_lock for synchronization:
@syslog_seq, @syslog_time, @syslog_partial, @console_seq,
struct kmsg_dumper.
For PRINTK_NMI_DIRECT_CONTEXT_MASK, @logbuf_lock usage is not removed
because it may be used for dumper synchronization.
Without @logbuf_lock synchronization of vprintk_store() it is no
longer possible to use the single static buffer for temporarily
sprint'ing the message. Instead, use vsnprintf() to determine the
length and perform the real vscnprintf() using the area reserved from
the ringbuffer. This leads to suboptimal packing of the message data,
but will result in less wasted storage than multiple per-cpu buffers
to support lockless temporary sprint'ing.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201209004453.17720-3-john.ogness@linutronix.de
In preparation for removing logbuf_lock, inline log_output()
and log_store() into vprintk_store(). This will simplify dealing
with the various code branches and fallbacks that are possible.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201209004453.17720-2-john.ogness@linutronix.de
Commit 849f3127bb ("switch /dev/kmsg to ->write_iter()") refactored
devkmsg_write() and left over a dead assignment on the variable 'len'.
Hence, make clang-analyzer warns:
kernel/printk/printk.c:744:4: warning: Value stored to 'len' is never read
[clang-analyzer-deadcode.DeadStores]
len -= endp - line;
^
Simply remove this obsolete dead assignment here.
Link: https://lore.kernel.org/r/20201130124915.7573-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
-----BEGIN PGP SIGNATURE-----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=7IkU
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- do not lose trailing newline in pr_cont() calls
- two trivial fixes for a dead store and a config description
* tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: finalize records with trailing newlines
printk: remove unneeded dead-store assignment
init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT description
Any record with a trailing newline (LOG_NEWLINE flag) cannot
be continued because the newline has been stripped and will
not be visible if the message is appended. This was already
handled correctly when committing in log_output() but was
not handled correctly when committing in log_store().
Fixes: f5f022e53b ("printk: reimplement log_cont using record extension")
Link: https://lore.kernel.org/r/20201126114836.14750-1-john.ogness@linutronix.de
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Get rid of the __call_single_node union and clean up the API a little
to avoid external code relying on the structure layout as much.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
The commit 48021f9813 ("printk: handle blank console arguments
passed in.") prevented crash caused by empty console= parameter value.
Unfortunately, this value is widely used on Chromebooks to disable
the console output. The above commit caused performance regression
because the messages were pushed on slow console even though nobody
was watching it.
Use ttynull driver explicitly for console="" and console=null
parameters. It has been created for exactly this purpose.
It causes that preferred_console is set. As a result, ttySX and ttyX
are not used as a fallback. And only ttynull console gets registered by
default.
It still allows to register other consoles either by additional console=
parameters or SPCR. It prevents regression because it worked this way even
before. Also it is a sane semantic. Preventing output on all consoles
should be done another way, for example, by introducing mute_console
parameter.
Link: https://lore.kernel.org/r/20201006025935.GA597@jagdpanzerIV.localdomain
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201111135450.11214-3-pmladek@suse.com
A bunch of functions in the new ringbuffer code take both a
printk_ringbuffer struct and a separate prb_data_ring. This is a relic
from an earlier version of the code when a second data ring was present.
Since this is no longer the case remove the extra function argument
from:
- data_make_reusable()
- data_push_tail()
- data_alloc()
- data_realloc()
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
make clang-analyzer on x86_64 defconfig caught my attention with:
kernel/printk/printk_ringbuffer.c:885:3: warning:
Value stored to 'desc' is never read [clang-analyzer-deadcode.DeadStores]
desc = to_desc(desc_ring, head_id);
^
Commit b6cf8b3f33 ("printk: add lockless ringbuffer") introduced
desc_reserve() with this unneeded dead-store assignment.
As discussed with John Ogness privately, this is probably just some minor
left-over from previous iterations of the ringbuffer implementation. So,
simply remove this unneeded dead assignment to make clang-analyzer happy.
As compilers will detect this unneeded assignment and optimize this anyway,
the resulting object code is identical before and after this change.
No functional change. No change to object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201106034005.18822-1-lukas.bulwahn@gmail.com
-----BEGIN PGP SIGNATURE-----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=FqTN
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.10-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
"Prevent overflow in the new lockless ringbuffer"
* tag 'printk-for-5.10-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: ringbuffer: Wrong data pointer when appending small string
Pull trivial updates from Jiri Kosina:
"The latest advances in computer science from the trivial queue"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
xtensa: fix Kconfig typo
spelling.txt: Remove some duplicate entries
mtd: rawnand: oxnas: cleanup/simplify code
selftests: vm: add fragment CONFIG_GUP_BENCHMARK
perf: Fix opt help text for --no-bpf-event
HID: logitech-dj: Fix spelling in comment
bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG
MAINTAINERS: rectify MMP SUPPORT after moving cputype.h
scif: Fix spelling of EACCES
printk: fix global comment
lib/bitmap.c: fix spello
fs: Fix missing 'bit' in comment
@setup_text_buf only copies the original text messages (without any
prefix or extended text). It only needs to be LOG_LINE_MAX in size.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200930090134.8723-3-john.ogness@linutronix.de
If a reader provides a buffer that is smaller than the message text,
the @text_len field of @info will have a value larger than the buffer
size. If readers blindly read @text_len bytes of data without
checking the size, they will read beyond their buffer.
Add this check to record_print_text() to properly recognize when such
truncation has occurred.
Add a maximum size argument to the ringbuffer function to extend
records so that records can not be created that are larger than the
buffer size of readers.
When extending records (LOG_CONT), do not extend records beyond
LOG_LINE_MAX since that is the maximum size available in the buffers
used by consoles and syslog.
Fixes: f5f022e53b ("printk: reimplement log_cont using record extension")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200930090134.8723-2-john.ogness@linutronix.de
Since there is no code that will ever store anything into the dict
ring, remove it. If any future dictionary properties are to be
added, these should be added to the struct printk_info.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200918223421.21621-4-john.ogness@linutronix.de
Dictionaries are only used for SUBSYSTEM and DEVICE properties. The
current implementation stores the property names each time they are
used. This requires more space than otherwise necessary. Also,
because the dictionary entries are currently considered optional,
it cannot be relied upon that they are always available, even if the
writer wanted to store them. These issues will increase should new
dictionary properties be introduced.
Rather than storing the subsystem and device properties in the
dict ring, introduce a struct dev_printk_info with separate fields
to store only the property values. Embed this struct within the
struct printk_info to provide guaranteed availability.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87mu1jl6ne.fsf@jogness.linutronix.de
The majority of the size of a descriptor is taken up by meta data,
which is often not of interest to the ringbuffer (for example,
when performing state checks). Since descriptors are often
temporarily stored on the stack, keeping their size minimal will
help reduce stack pressure.
Rather than embedding the printk_info into the descriptor, create
a separate printk_info array. The index of a descriptor in the
descriptor array corresponds to the printk_info with the same
index in the printk_info array. The rules for validity of a
printk_info match the existing rules for the data blocks: the
descriptor must be in a consistent state.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200918223421.21621-2-john.ogness@linutronix.de
Use the record extending feature of the ringbuffer to implement
continuous messages. This preserves the existing continuous message
behavior.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-7-john.ogness@linutronix.de
Add support for extending the newest data block. For this, introduce
a new finalization state (desc_finalized) denoting a committed
descriptor that cannot be extended.
Until a record is finalized, a writer can reopen that record to
append new data. Reopening a record means transitioning from the
desc_committed state back to the desc_reserved state.
A writer can explicitly finalize a record if there is no intention
of extending it. Also, records are automatically finalized when a
new record is reserved. This relieves writers of needing to
explicitly finalize while also making such records available to
readers sooner. (Readers can only traverse finalized records.)
Four new memory barrier pairs are introduced. Two of them are
insignificant additions (data_realloc:A/desc_read:D and
data_realloc:A/data_push_tail:B) because they are alternate path
memory barriers that exactly match the purpose, pairing, and
context of the two existing memory barrier pairs they provide an
alternate path for. The other two new memory barrier pairs are
significant additions:
desc_reopen_last:A / _prb_commit:B - When reopening a descriptor,
ensure the state transitions back to desc_reserved before
fully trusting the descriptor data.
_prb_commit:B / desc_reserve:D - When committing a descriptor,
ensure the state transitions to desc_committed before checking
the head ID to see if the descriptor needs to be finalized.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-6-john.ogness@linutronix.de
Rather than deriving the state by evaluating bits within the flags
area of the state variable, assign the states explicit values and
set those values in the flags area. Introduce macros to make it
simple to read and write state values for the state variable.
Although the functionality is preserved, the binary representation
for the states is changed.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-5-john.ogness@linutronix.de
prb_reserve() will set some meta data values and leave others
uninitialized (or rather, containing the values of the previous
wrap). Simplify the API by always clearing out all the fields.
Only the sequence number is filled in. The caller is now
responsible for filling in the rest of the meta data fields.
In particular, for correctly filling in text and dict lengths.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-4-john.ogness@linutronix.de
Rather than continually needing to explicitly check @begin and @next
to identify a dataless block, introduce and use a BLK_DATALESS()
macro.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-3-john.ogness@linutronix.de
Move the internal get_data() function as-is above prb_reserve() so
that a later change can make use of the static function.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-2-john.ogness@linutronix.de
@state_var is copied as part of the descriptor copying via
memcpy(). This is not allowed because @state_var is an atomic type,
which in some implementations may contain a spinlock.
Avoid using memcpy() with @state_var by explicitly copying the other
fields of the descriptor. @state_var is set using atomic set
operator before returning.
Fixes: b6cf8b3f33 ("printk: add lockless ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914094803.27365-2-john.ogness@linutronix.de
It is expected that desc_read() will always set at least the
@state_var field. However, if the descriptor is in an inconsistent
state, no fields are set.
Also, the second load of @state_var is not stored in @desc_out and
so might not match the state value that is returned.
Always set the last loaded @state_var into @desc_out, regardless of
the descriptor consistency.
Fixes: b6cf8b3f33 ("printk: add lockless ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914094803.27365-1-john.ogness@linutronix.de
With commit 896fbe20b4 ("printk: use the lockless ringbuffer"),
printk() started silently dropping messages without text because such
records are not supported by the new printk ringbuffer.
Add support for such records.
Currently dataless records are denoted by INVALID_LPOS in order
to recognize failed prb_reserve() calls. Change the ringbuffer
to instead use two different identifiers (FAILED_LPOS and
NO_LPOS) to distinguish between failed prb_reserve() records and
successful dataless records, respectively.
Fixes: 896fbe20b4 ("printk: use the lockless ringbuffer")
Fixes: https://lkml.kernel.org/r/20200718121053.GA691245@elver.google.com
Reported-by: Marco Elver <elver@google.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200721132528.9661-1-john.ogness@linutronix.de
-----BEGIN PGP SIGNATURE-----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=ZcMq
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Herbert Xu made printk header file self-contained.
- Andy Shevchenko and Sergey Senozhatsky cleaned up console->setup()
error handling.
- Andy Shevchenko did some cleanups (e.g. sparse warning) in vsprintf
code.
- Minor documentation updates.
* tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
lib/vsprintf: Force type of flags value for gfp_t
lib/vsprintf: Replace custom spec to print decimals with generic one
lib/vsprintf: Replace hidden BUILD_BUG_ON() with static_assert()
printk: Make linux/printk.h self-contained
doc:kmsg: explicitly state the return value in case of SEEK_CUR
Replace HTTP links with HTTPS ones: vsprintf
hvc: unify console setup naming
console: Fix trivia typo 'change' -> 'chance'
console: Propagate error code from console ->setup()
tty: hvc: Return proper error code from console ->setup() hook
serial: sunzilog: Return proper error code from console ->setup() hook
serial: sunsab: Return proper error code from console ->setup() hook
mips: Return proper error code from console ->setup() hook
The commit 625d344978 ("Revert "kernel/printk: add kmsg SEEK_CUR
handling"") reverted a change done to the return value in case a SEEK_CUR
operation was performed for kmsg buffer based on the fact that different
userspace apps were handling the new return value (-ESPIPE) in different
ways, breaking them.
At the same time -ESPIPE was the wrong decision because kmsg /does support/
seek() but doesn't follow the "normal" behavior userspace is used to.
Because of that and also considering the time -EINVAL has been used, it was
decided to keep this way to avoid more userspace breakage.
This patch adds an official statement to the kmsg documentation pointing to
the current return value for SEEK_CUR, -EINVAL, thus userspace libraries
and apps can refer to it for a definitive guide on what to expect.
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200710174423.10480-1-bmeneg@redhat.com
Replace the existing ringbuffer usage and implementation with
lockless ringbuffer usage. Even though the new ringbuffer does not
require locking, all existing locking is left in place. Therefore,
this change is purely replacing the underlining ringbuffer.
Changes that exist due to the ringbuffer replacement:
- The VMCOREINFO has been updated for the new structures.
- Dictionary data is now stored in a separate data buffer from the
human-readable messages. The dictionary data buffer is set to the
same size as the message buffer. Therefore, the total required
memory for both dictionary and message data is
2 * (2 ^ CONFIG_LOG_BUF_SHIFT) for the initial static buffers and
2 * log_buf_len (the kernel parameter) for the dynamic buffers.
- Record meta-data is now stored in a separate array of descriptors.
This is an additional 72 * (2 ^ (CONFIG_LOG_BUF_SHIFT - 5)) bytes
for the static array and 72 * (log_buf_len >> 5) bytes for the
dynamic array.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200709132344.760-5-john.ogness@linutronix.de
This reverts commit 3ac37a93fa.
This optimization will not apply once the transition to a lockless
printk is complete. Rather than porting this optimization through
the transition only to remove it anyway, just revert it now to
simplify the transition.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200709132344.760-4-john.ogness@linutronix.de
Introduce a multi-reader multi-writer lockless ringbuffer for storing
the kernel log messages. Readers and writers may use their API from
any context (including scheduler and NMI). This ringbuffer will make
it possible to decouple printk() callers from any context, locking,
or console constraints. It also makes it possible for readers to have
full access to the ringbuffer contents at any time and context (for
example from any panic situation).
The printk_ringbuffer is made up of 3 internal ringbuffers:
desc_ring:
A ring of descriptors. A descriptor contains all record meta data
(sequence number, timestamp, loglevel, etc.) as well as internal state
information about the record and logical positions specifying where in
the other ringbuffers the text and dictionary strings are located.
text_data_ring:
A ring of data blocks. A data block consists of an unsigned long
integer (ID) that maps to a desc_ring index followed by the text
string of the record.
dict_data_ring:
A ring of data blocks. A data block consists of an unsigned long
integer (ID) that maps to a desc_ring index followed by the dictionary
string of the record.
The internal state information of a descriptor is the key element to
allow readers and writers to locklessly synchronize access to the data.
Co-developed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200709132344.760-3-john.ogness@linutronix.de
I bet the word 'chance' has to be used in 'had a chance to be called',
but, alas, I'm not native speaker...
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618164751.56828-7-andriy.shevchenko@linux.intel.com
Since console ->setup() hook returns meaningful error codes,
propagate it to the caller of try_enable_new_console().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618164751.56828-6-andriy.shevchenko@linux.intel.com
This reverts commit 8ece3b3eb5.
This commit broke userspace. Bash uses ESPIPE to determine whether or
not the file should be read using "unbuffered I/O", which means reading
1 byte at a time instead of 128 bytes at a time. I used to use bash to
read through kmsg in a really quite nasty way:
while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do
echo "SARU $line"
done < /dev/kmsg
This will show all lines that can fit into the 128 byte buffer, and skip
lines that don't. That's pretty awful, but at least it worked.
With this change, bash now tries to do 1-byte reads, which means it
skips all the lines, which is worse than before.
Now, I don't really care very much about this, and I'm already look for
a workaround. But I did just spend an hour trying to figure out why my
scripts were broken. Either way, it makes no difference to me personally
whether this is reverted, but it might be something to consider. If you
declare that "trying to read /dev/kmsg with bash is terminally stupid
anyway," I might be inclined to agree with you. But do note that bash
uses lseek(fd, 0, SEEK_CUR)==>ESPIPE to determine whether or not it's
reading from a pipe.
Cc: Bruno Meneguele <bmeneg@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=+1iq
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.8-kdb-nmi' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
"One more printk change for 5.8: make sure that messages printed from
KDB context are redirected to KDB console handlers. It did not work
when KDB interrupted NMI or printk_safe contexts.
Arm people started hitting this problem more often recently. I forgot
to add the fix into the previous pull request by mistake"
* tag 'printk-for-5.8-kdb-nmi' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/kdb: Redirect printk messages into kdb in any context
kdb has to get messages on consoles even when the system is stopped.
It uses kdb_printf() internally and calls console drivers on its own.
It uses a hack to reuse an existing code. It sets "kdb_trap_printk"
global variable to redirect even the normal printk() into the
kdb_printf() variant.
The variable "kdb_trap_printk" is checked in printk_default() and
it is ignored when printk is redirected to printk_safe in NMI context.
Solve this by moving the check into printk_func().
It is obvious that it is not fully safe. But it does not make things
worse. The console drivers are already called in this context by
db_printf() direct calls.
Reported-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200520102233.GC3464@linux-b0ei
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
- RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl7U/r0RHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hSNxAAirKhPGBoLI9DW1qde4OFhZg+BlIpS+LD
IE/0eGB8hGwhb1793RGbzIJfSnRQpSOPxWbWc6DJZ4Zpi5/ZbVkiPKsuXpM1xGxs
kuBCTOhWy1/p3iCZ1JH/JCrCAdWGZkIzEoaV7ipnHtV/+UrRbCWH5PB7R0fYvcbI
q5bUcWJyEp/bYMxQn8DhAih6SLPHx+F9qaGAqqloLSHstTYG2HkBhBGKnqcd/Jex
twkLK53poCkeP/c08V1dyagU2IRWj2jGB1NjYh/Ocm+Sn/vru15CVGspjVjqO5FF
oq07lad357ddMsZmKoM2F5DhXbOh95A+EqF9VDvIzCvfGMUgqYI1oxWF4eycsGhg
/aYJgYuN23YeEe2DkDzJB67GvBOwl4WgdoFaxKRzOiCSfrhkM8KqM4G9Fz1JIepG
abRJCF85iGcLslU9DkrShQiDsd/CRPzu/jz6ybK0I2II2pICo6QRf76T7TdOvKnK
yXwC6OdL7/dwOht20uT6XfnDXMCWI4MutiUrb8/C1DbaihwEaI2denr3YYL+IwrB
B38CdP6sfKZ5UFxKh0xb+sOzWrw0KA+ThSAXeJhz3tKdxdyB6nkaw3J9lFg8oi20
XGeAujjtjMZG5cxt2H+wO9kZY0RRau/nTqNtmmRrCobd5yJjHHPHH8trEd0twZ9A
X5Wjh11lv3E=
=Yisx
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The RCU updates for this cycle were:
- RCU-tasks update, including addition of RCU Tasks Trace for BPF use
and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates"
* tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
rcu: Allow for smp_call_function() running callbacks from idle
rcu: Provide rcu_irq_exit_check_preempt()
rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()
rcu: Provide __rcu_is_watching()
rcu: Provide rcu_irq_exit_preempt()
rcu: Make RCU IRQ enter/exit functions rely on in_nmi()
rcu/tree: Mark the idle relevant functions noinstr
x86: Replace ist_enter() with nmi_enter()
x86/mce: Send #MC singal from task work
x86/entry: Get rid of ist_begin/end_non_atomic()
sched,rcu,tracing: Avoid tracing before in_nmi() is correct
sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception
lockdep: Always inline lockdep_{off,on}()
hardirq/nmi: Allow nested nmi_enter()
arm64: Prepare arch_nmi_enter() for recursion
printk: Disallow instrumenting print_nmi_enter()
printk: Prepare for nested printk_nmi_enter()
rcutorture: Convert ULONG_CMP_LT() to time_before()
torture: Add a --kasan argument
torture: Save a few lines by using config_override_param initially
...
-----BEGIN PGP SIGNATURE-----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=pUBG
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Benjamin Herrenschmidt solved a problem with non-matched console
aliases by first checking consoles defined on the command line. It is
a more conservative approach than the previous attempts.
- Benjamin also made sure that the console accessible via /dev/console
always has CON_CONSDEV flag.
- Andy Shevchenko added the %ptT modifier for printing struct time64_t.
It extends the existing %ptR handling for struct rtc_time.
- Bruno Meneguele fixed /dev/kmsg error value returned by unsupported
SEEK_CUR.
- Tetsuo Handa removed unused pr_cont_once().
... and a few small fixes.
* tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove pr_cont_once()
printk: handle blank console arguments passed in.
kernel/printk: add kmsg SEEK_CUR handling
printk: Fix a typo in comment "interator"->"iterator"
usb: pulse8-cec: Switch to use %ptT
ARM: bcm2835: Switch to use %ptT
lib/vsprintf: Print time64_t in human readable format
lib/vsprintf: update comment about simple_strto<foo>() functions
printk: Correctly set CON_CONSDEV even when preferred console was not registered
printk: Fix preferred console selection with multiple matches
printk: Move console matching logic into a separate function
printk: Convert a use of sprintf to snprintf in console_unlock
The pstore subsystem already had a private version of this function.
With the coming addition of the pstore/zone driver, this needs to be
shared. As it really should live with printk, move it there instead.
Link: https://lore.kernel.org/lkml/20200515184434.8470-4-keescook@chromium.org/
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
kmsg_dump() allows to dump kmesg buffer for various system events: oops,
panic, reboot, etc. It provides an interface to register a callback
call for clients, and in that callback interface there is a field
"max_reason", but it was getting ignored when set to any "reason"
higher than KMSG_DUMP_OOPS unless "always_kmsg_dump" was passed as
kernel parameter.
Allow clients to actually control their "max_reason", and keep the
current behavior when "max_reason" is not set.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-3-keescook@chromium.org/
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
If uboot passes a blank string to console_setup then it results in
a trashed memory. Ultimately, the kernel crashes during freeing up
the memory.
This fix checks if there is a blank parameter being
passed to console_setup from uboot. In case it detects that
the console parameter is blank then it doesn't setup the serial
device and it gracefully exits.
Link: https://lore.kernel.org/r/20200522065306.83-1-shreyas.joshi@biamp.com
Signed-off-by: Shreyas Joshi <shreyas.joshi@biamp.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: Better format the commit message and code, remove unnecessary brackets.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Userspace libraries, e.g. glibc's dprintf(), perform a SEEK_CUR operation
over any file descriptor requested to make sure the current position isn't
pointing to junk due to previous manipulation of that same fd. And whenever
that fd doesn't have support for such operation, the userspace code expects
-ESPIPE to be returned.
However, when the fd in question references the /dev/kmsg interface, the
current kernel code state returns -EINVAL instead, causing an unexpected
behavior in userspace: in the case of glibc, when -ESPIPE is returned it
gets ignored and the call completes successfully, while returning -EINVAL
forces dprintf to fail without performing any action over that fd:
if (_IO_SEEKOFF (fp, (off64_t)0, _IO_seek_cur, _IOS_INPUT|_IOS_OUTPUT) ==
_IO_pos_BAD && errno != ESPIPE)
return NULL;
With this patch we make sure to return the correct value when SEEK_CUR is
requested over kmsg and also add some kernel doc information to formalize
this behavior.
Link: https://lore.kernel.org/r/20200317103344.574277-1-bmeneg@redhat.com
Cc: linux-kernel@vger.kernel.org
Cc: rostedt@goodmis.org,
Cc: David.Laight@ACULAB.COM
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
There is a typo in comment, fix it.
Signed-off-by: Ethon Paul <ethp@qq.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
It happens early in nmi_enter(), no tracing, probing or other funnies
allowed. Specifically as nmi_enter() will be used in do_debug(), which
would cause recursive exceptions when kprobed.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505134101.139720912@linutronix.de
There is plenty of space in the printk_context variable. Reserve one byte
there for the NMI context to be on the safe side.
It should never overflow. The BUG_ON(in_nmi() == NMI_MASK) in nmi_enter()
will trigger much earlier.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505134100.681374113@linutronix.de
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
printk_deferred(), similarly to printk_safe/printk_nmi, does not
immediately attempt to print a new message on the consoles, avoiding
calls into non-reentrant kernel paths, e.g. scheduler or timekeeping,
which potentially can deadlock the system.
Those printk() flavors, instead, rely on per-CPU flush irq_work to print
messages from safer contexts. For same reasons (recursive scheduler or
timekeeping calls) printk() uses per-CPU irq_work in order to wake up
user space syslog/kmsg readers.
However, only printk_safe/printk_nmi do make sure that per-CPU areas
have been initialised and that it's safe to modify per-CPU irq_work.
This means that, for instance, should printk_deferred() be invoked "too
early", that is before per-CPU areas are initialised, printk_deferred()
will perform illegal per-CPU access.
Lech Perczak [0] reports that after commit 1b710b1b10 ("char/random:
silence a lockdep splat with printk()") user-space syslog/kmsg readers
are not able to read new kernel messages.
The reason is printk_deferred() being called too early (as was pointed
out by Petr and John).
Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU
areas are initialized.
Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/
Reported-by: Lech Perczak <l.perczak@camlintechnologies.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Jann Horn <jannh@google.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CON_CONSDEV flag was historically used to put/keep the preferred console
first in console_drivers list. Where the preferred console is the last
on the command line.
The ordering is important only when opening /dev/console:
+ tty_kopen()
+ tty_lookup_driver()
+ console_device()
The flag was originally an implementation detail. But it was later
made accessible from userspace via /proc/consoles. It was used,
for example, by the tool "showconsole" to show the real tty
accessible via /dev/console, see
https://github.com/bitstreamout/showconsole
Now, the current code sets CON_CONSDEV only for the preferred
console or when a fallback console is added. The flag is not
set when the preferred console is defined on the command line
but it is not registered from some reasons.
Simple solution is to set CON_CONSDEV flag for the first
registered console. It will work most of the time because:
+ Most real consoles have console->device defined.
+ Boot consoles are removed in printk_late_init().
+ unregister_console() moves CON_CONSDEV flag to the next
console.
Clean solution would require checking con->device when the
preferred console is registered and in unregister_console().
Conclusion:
Use the simple solution for now. It is better than the current
state and good enough.
The clean solution is not worth it. It would complicate the already
complicated code without too much gain. Instead the code would deserve
a complete rewrite.
Link: https://lore.kernel.org/r/20200213095133.23176-4-pmladek@suse.com
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[pmladek@suse.com: Correct reasoning in the commit message, comment update.]
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
In the following circumstances, the rule of selecting the console
corresponding to the last "console=" entry on the command line as
the preferred console (CON_CONSDEV, ie, /dev/console) fails. This
is a specific example, but it could happen with different consoles
that have a similar name aliasing mechanism.
- The kernel command line has both console=tty0 and console=ttyS0
in that order (the latter with speed etc... arguments).
This is common with some cloud setups such as Amazon Linux.
- add_preferred_console is called early to register "uart0". In
our case that happens from acpi_parse_spcr() on arm64 since the
"enable_console" argument is true on that architecture. This causes
"uart0" to become entry 0 of the console_cmdline array.
Now, because of the above, what happens is:
- add_preferred_console is called by the cmdline parsing for tty0
and ttyS0 respectively, thus occupying entries 1 and 2 of the
console_cmdline array (since this happens after ACPI SPCR parsing).
At that point preferred_console is set to 2 as expected.
- When the tty layer kicks in, it will call register_console for tty0.
This will match entry 1 in console_cmdline array. It isn't our
preferred console but because it's our only console at this point,
it will end up "first" in the consoles list.
- When 8250 probes the actual serial port later on, it calls
register_console for ttyS0. At that point the loop in register_console
tries to match it with the entries in the console_cmdline array.
Ideally this should match ttyS0 in entry 2, which is preferred, causing
it to be inserted first and to replace tty0 as CONSDEV. However, 8250
provides a "match" hook in its struct console, and that hook will match
"uart" as an alias to "ttyS". So we match uart0 at entry 0 in the array
which is not the preferred console and will not match entry 2 which is
since we break out of the loop on the first match. As a result,
we don't set CONSDEV and don't insert it first, but second in
the console list.
As a result, we end up with tty0 remaining first in the array, and thus
/dev/console going there instead of the last user specified one which
is ttyS0.
This tentative fix register_console() to scan first for consoles
specified on the command line, and only if none is found, to then
scan for consoles specified by the architecture.
Link: https://lore.kernel.org/r/20200213095133.23176-3-pmladek@suse.com
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
This moves the loop that tries to match a newly registered console
with the command line or add_preferred_console list into a separate
helper, in order to be able to call it multiple times in subsequent
patches.
Link: https://lore.kernel.org/r/20200213095133.23176-2-pmladek@suse.com
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
When CONFIG_PRINTK is disabled (e.g. when building allnoconfig), clang
warns:
../kernel/printk/printk.c:2416:10: warning: 'sprintf' will always
overflow; destination buffer has size 0, but format string expands to at
least 33 [-Wfortify-source]
len = sprintf(text,
^
1 warning generated.
It is not wrong; text has a zero size when CONFIG_PRINTK is disabled
because LOG_LINE_MAX and PREFIX_MAX are both zero. Change to snprintf so
that this case is explicitly handled without any risk of overflow.
Link: https://github.com/ClangBuiltLinux/linux/issues/846
Link: 6d485ff455
Link: http://lkml.kernel.org/r/20200130221644.2273-1-natechancellor@gmail.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Some consoles might require special operations on unregistering.
For instance, serial console, when registered in the kernel,
keeps power on for entire time, until it gets unregistered.
Example of use:
->setup(console):
pm_runtime_get(...);
->exit(console):
pm_runtime_put(...);
For such cases to have a balance we would provide ->exit() callback.
Link: http://lkml.kernel.org/r/20200203133130.11591-7-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
If console is not on the list then there is nothing for us to do
and sysfs notify is pointless.
Note, that nr_ext_console_drivers is being changed only for listed
consoles.
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20200203133130.11591-6-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
There are only two callers that use the returned code from
unregister_console():
- unregister_early_console() in arch/m68k/kernel/early_printk.c
- kgdb_unregister_nmi_console() in drivers/tty/serial/kgdb_nmi.c
They both expect to get "0" on success and a non-zero value on error.
But the current behavior is confusing and buggy:
- _braille_unregister_console() returns "1" on success
- unregister_console() returns "1" on error
Fix and clean up the behavior:
- Return success when _braille_unregister_console() succeeded
- Return a meaningful error code when the console was
not registered before
Link: http://lkml.kernel.org/r/20200203133130.11591-5-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
/* find the last or real console */
This comment is misleading. The purpose of the loop is to check
if we are trying to register boot console after a real one has
already been registered. This is already mentioned in a comment
above.
Link: http://lkml.kernel.org/r/20200203133130.11591-4-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[pmladek@suse.com: Updated commit message.]
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
We have rather open coded single linked list manipulations where we may
simple use for_each_console() helper with properly set exit conditions.
Replace open coded single-linked list handling with for_each_console()
helper in use.
Link: http://lkml.kernel.org/r/20200203133130.11591-3-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
There is no need to explicitly check for console_drivers to be non-NULL
since for_each_console() does this.
Link: http://lkml.kernel.org/r/20200203133130.11591-2-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Commit f92b070f2d ("printk: Do not miss new messages when replaying
the log") introduced a new variable @exclusive_console_stop_seq to
store when an exclusive console should stop printing. It should be
set to the @console_seq value at registration. However, @console_seq
is previously set to @syslog_seq so that the exclusive console knows
where to begin. This results in the exclusive console immediately
reactivating all the other consoles and thus repeating the messages
for those consoles.
Set @console_seq after @exclusive_console_stop_seq has stored the
current @console_seq value.
Fixes: f92b070f2d ("printk: Do not miss new messages when replaying the log")
Link: http://lkml.kernel.org/r/20191219115322.31160-1-john.ogness@linutronix.de
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Pull irq updates from Ingo Molnar:
"Most of the IRQ subsystem changes in this cycle were irq-chip driver
updates:
- Qualcomm PDC wakeup interrupt support
- Layerscape external IRQ support
- Broadcom bcm7038 PM and wakeup support
- Ingenic driver cleanup and modernization
- GICv3 ITS preparation for GICv4.1 updates
- GICv4 fixes
There's also the series from Frederic Weisbecker that fixes memory
ordering bugs for the irq-work logic, whose primary fix is to turn
work->irq_work.flags into an atomic variable and then convert the
complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a
much simpler atomic_fetch_or() call.
There are also various smaller cleanups"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs
pinctrl/msm: Setup GPIO chip in hierarchy
irqchip/qcom-pdc: Add irqchip set/get state calls
irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs
irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask
irqchip/qcom-pdc: Update max PDC interrupts
of/irq: Document properties for wakeup interrupt parent
genirq: Introduce irq_chip_get/set_parent_state calls
irqdomain: Add bus token DOMAIN_BUS_WAKEUP
genirq: Fix function documentation of __irq_alloc_descs()
irq_work: Fix IRQ_WORK_BUSY bit clearing
irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))
irq_work: Slightly simplify IRQ_WORK_PENDING clearing
irq_work: Fix irq_work_claim() memory ordering
irq_work: Convert flags to atomic_t
irqchip: Ingenic: Add process for more than one irq at the same time.
irqchip: ingenic: Alloc generic chips from IRQ domain
irqchip: ingenic: Get virq number from IRQ domain
irqchip: ingenic: Error out if IRQ domain creation failed
irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions
...
We need to convert flags to atomic_t in order to later fix an ordering
issue on atomic_cmpxchg() failure. This will allow us to use atomic_fetch_or().
Also clarify the nature of those flags.
[ mingo: Converted two more usage site the original patch missed. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191108160858.31665-2-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
strncmp(str, const, len) is error-prone because len is easy to have typo.
An example is the hard-coded len has counting error or sizeof(const)
forgets - 1.
So we prefer using newly introduced str_has_prefix() to substitute
such strncmp() to make code better.
Link: http://lkml.kernel.org/r/20190809071034.17279-1-hslester96@gmail.com
Cc: "Steven Rostedt" <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: Slightly updated and reformatted the commit message.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
kmsg_dump_get_buffer() is supposed to select all the youngest log
messages which fit into the provided buffer. It determines the correct
start index by using msg_print_text() with a NULL buffer to calculate
the size of each entry. However, when performing the actual writes,
msg_print_text() only writes the entry to the buffer if the written len
is lesser than the size of the buffer. So if the lengths of the
selected youngest log messages happen to precisely fill up the provided
buffer, the last log message is not included.
We don't want to modify msg_print_text() to fill up the buffer and start
returning a length which is equal to the size of the buffer, since
callers of its other users, such as kmsg_dump_get_line(), depend upon
the current behaviour.
Instead, fix kmsg_dump_get_buffer() to compensate for this.
For example, with the following two final prints:
[ 6.427502] AAAAAAAAAAAAA
[ 6.427769] BBBBBBBB12345
A dump of a 64-byte buffer filled by kmsg_dump_get_buffer(), before this
patch:
00000000: 3c 30 3e 5b 20 20 20 20 36 2e 35 32 32 31 39 37 <0>[ 6.522197
00000010: 5d 20 41 41 41 41 41 41 41 41 41 41 41 41 41 0a ] AAAAAAAAAAAAA.
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
After this patch:
00000000: 3c 30 3e 5b 20 20 20 20 36 2e 34 35 36 36 37 38 <0>[ 6.456678
00000010: 5d 20 42 42 42 42 42 42 42 42 31 32 33 34 35 0a ] BBBBBBBB12345.
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Link: http://lkml.kernel.org/r/20190711142937.4083-1-vincent.whitchurch@axis.com
Fixes: e2ae715d66 ("kmsg - kmsg_dump() use iterator to receive log buffer content")
To: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.5+
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see http www gnu org licenses
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details [based]
[from] [clk] [highbank] [c] you should have received a copy of the
gnu general public license along with this program if not see http
www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 355 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently on panic, kernel will lower the loglevel and print out pending
printk msg only with console_flush_on_panic().
Add an option for users to configure the "panic_print" to replay all
dmesg in buffer, some of which they may have never seen due to the
loglevel setting, which will help panic debugging .
[feng.tang@intel.com: keep the original console_flush_on_panic() inside panic()]
Link: http://lkml.kernel.org/r/1556199137-14163-1-git-send-email-feng.tang@intel.com
[feng.tang@intel.com: use logbuf lock to protect the console log index]
Link: http://lkml.kernel.org/r/1556269868-22654-1-git-send-email-feng.tang@intel.com
Link: http://lkml.kernel.org/r/1556095872-36838-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When kernel panic happens, it will first print the panic call stack,
then the ending msg like:
[ 35.743249] ---[ end Kernel panic - not syncing: Fatal exception
[ 35.749975] ------------[ cut here ]------------
The above message are very useful for debugging.
But if system is configured to not reboot on panic, say the
"panic_timeout" parameter equals 0, it will likely print out many noisy
message like WARN() call stack for each and every CPU except the panic
one, messages like below:
WARNING: CPU: 1 PID: 280 at kernel/sched/core.c:1198 set_task_cpu+0x183/0x190
Call Trace:
<IRQ>
try_to_wake_up
default_wake_function
autoremove_wake_function
__wake_up_common
__wake_up_common_lock
__wake_up
wake_up_klogd_work_func
irq_work_run_list
irq_work_tick
update_process_times
tick_sched_timer
__hrtimer_run_queues
hrtimer_interrupt
smp_apic_timer_interrupt
apic_timer_interrupt
For people working in console mode, the screen will first show the panic
call stack, but immediately overridden by these noisy extra messages,
which makes debugging much more difficult, as the original context gets
lost on screen.
Also these noisy messages will confuse some users, as I have seen many bug
reporters posted the noisy message into bugzilla, instead of the real
panic call stack and context.
Adding a flag "suppress_printk" which gets set in panic() to avoid those
noisy messages, without changing current kernel behavior that both panic
blinking and sysrq magic key can work as is, suggested by Petr Mladek.
To verify this, make sure kernel is not configured to reboot on panic and
in console
# echo c > /proc/sysrq-trigger
to see if console only prints out the panic call stack.
Link: http://lkml.kernel.org/r/1551430186-24169-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- fix memory access if logo is bigger than the screen (Manfred
Schlaegl)
- silence fbcon logo on 'quiet' boots (Prarit Bhargava)
- use kvmalloc() for scrollback buffer in fbcon (Konstantin Khorenko)
- misc fixes (Colin Ian King, YueHaibing, Matteo Croce, Mathieu
Malaterre, Anders Roxell, Arnd Bergmann)
- misc cleanups (Rob Herring, Lubomir Rintel, Greg Kroah-Hartman,
Jani Nikula, Michal Vokáč)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+ZFI
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v5.1' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"Just a couple of small fixes and cleanups:
- fix memory access if logo is bigger than the screen (Manfred
Schlaegl)
- silence fbcon logo on 'quiet' boots (Prarit Bhargava)
- use kvmalloc() for scrollback buffer in fbcon (Konstantin Khorenko)
- misc fixes (Colin Ian King, YueHaibing, Matteo Croce, Mathieu
Malaterre, Anders Roxell, Arnd Bergmann)
- misc cleanups (Rob Herring, Lubomir Rintel, Greg Kroah-Hartman,
Jani Nikula, Michal Vokáč)"
* tag 'fbdev-v5.1' of git://github.com/bzolnier/linux:
fbdev: mbx: fix a misspelled variable name
fbdev: omap2: fix warnings in dss core
video: fbdev: Fix potential NULL pointer dereference
fbcon: Silence fbcon logo on 'quiet' boots
printk: Export console_printk
ARM: dts: imx28-cfa10036: Fix the reset gpio signal polarity
video: ssd1307fb: Do not hard code active-low reset sequence
dt-bindings: display: ssd1307fb: Remove reset-active-low from examples
fbdev: fbmem: fix memory access if logo is bigger than the screen
video/fbdev: refactor video= cmdline parsing
fbdev: mbx: fix up debugfs file creation
fbdev: omap2: no need to check return value of debugfs_create functions
video: fbdev: geode: remove ifdef OLPC noise
video: offb: annotate implicit fall throughs
omapfb: fix typo
fbdev: Use of_node_name_eq for node name comparisons
fbcon: use kvmalloc() for scrollback buffer
fbdev: chipsfb: remove set but not used variable 'size'
fbdev/via: fix spelling mistake "Expandsion" -> "Expansion"
As all the memblock allocation functions return NULL in case of error
rather than panic(), the duplicates with _nopanic suffix can be removed.
Link: http://lkml.kernel.org/r/1548057848-15136-22-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com> [printk]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com> [c-sky]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Juergen Gross <jgross@suse.com> [Xen]
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJcf9djAAoJEFKgDEdIgJTyVGYP/REwDqjU7HrHCWdB0XJqens5
OLkCnsnqRyhGUBJX6tc9dnY507FjEFS6DEAZDAPK14T/a50/57xWyXRNObzs7qud
sP0otc/Gm7rWOP96ucEbMcPgzhixbC8fO3kvdQhc2HtxMQs4sotXqxDxVDHrbwNt
7hvboTPLbiD7IFmqsQhtNWpGAXGhGzE8RwzltcWP+PcdI4oZVLW5lc4CUPG89AoX
Fwd+7TAyH1X0/1QH/RQdOoUadiGIPucMC2HPbk+rDWF6+7zA83W9r28bYvuQemtZ
myhRTj6Y46HfngJm5UFCZ56F3mLhs7V7Nc+bGNh6sU2xepCnzcAy5aBwl8xqnftZ
hCxzyCdd8JrlcyMKRS4nq8dV0gsJKARRg0S3ZOdKElU4s7ep5dDJ0Ca9lq3K012I
nPXrFgC6ZWp1i1aAWV2g5F9i6vB6rvbzqg+MGiuGijEOe0Lz80Humm/Rc4+0KQd2
kT0AOZnpknYMXVs+vbkhntx1Pv1ubzER3B9aysB0hM1NLmZWs2lQgU6sLZnJie3i
pEaFeCW+t52p+fkMJjYuirdjK4+zRYyeSqbSECdPCCjSjQcC2SX97hh/qyShtVxc
EFjkEKCtHrquFmeGYzCyMk4/rlGtmOJRYchqJi9J/lULW9wHA4zpAyRa1FZkmBzl
Zus2Kbmy2oilqsPdpAqt
=dXuJ
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to sort mixed lines by an extra information about the caller
- Remove no longer used LOG_PREFIX.
- Some clean up and documentation update.
* tag 'printk-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk/docs: Add extra integer types to printk-formats
printk: Remove no longer used LOG_PREFIX.
lib/vsprintf: Remove %pCr remnant in comment
printk: Pass caller information to log_store().
printk: Add caller information to printk() output.
When commit 5becfb1df5 ("kmsg: merge continuation records while
printing") introduced LOG_PREFIX, we used KERN_DEFAULT etc. as a flag
for setting LOG_PREFIX in order to tell whether to call cont_add()
(i.e. whether to append the message to "struct cont").
But since commit 4bcc595ccd ("printk: reinstate KERN_CONT for
printing continuation lines") inverted the behavior (i.e. don't append
the message to "struct cont" unless KERN_CONT is specified) and commit
5aa068ea40 ("printk: remove games with previous record flags")
removed the last LOG_PREFIX check, setting LOG_PREFIX via KERN_DEFAULT
etc. is no longer meaningful.
Therefore, we can remove LOG_PREFIX and make KERN_DEFAULT empty string.
Link: http://lkml.kernel.org/r/1550829580-9189-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
To: Steven Rostedt <rostedt@goodmis.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
John Ogness
Petr Mladek
Muchun Song
Lukas Bulwahn
Linus Torvalds
Ingo Molnar
Peter Zijlstra
Nikolay Borisov
Gustavo A. R. Silva
Petr Mladek
Jiri Kosina
Randy Dunlap
Bruno Meneguele
Andy Shevchenko
Jason A. Donenfeld
Kees Cook
Pavel Tatashin
Shreyas Joshi
Ethon Paul
Christoph Hellwig
Sergey Senozhatsky
Benjamin Herrenschmidt
Nathan Chancellor
Frederic Weisbecker
Qian Cai
Chuhong Yuan
Vincent Whitchurch
Thomas Gleixner
Feng Tang
Mike Rapoport
Tetsuo Handa