This should be >= instead of > here. It means that we don't increment
the free count enough so it becomes off by one.
Fixes: 9ad1a37493 ("dpaa_eth: add support for DPAA Ethernet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Remove erroneous negation of the error check of the reset function
to decrement trigger_count in the error case, not on success. This
fixes shared resets to actually only trigger once, as intended.
-----BEGIN PGP SIGNATURE-----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=o2ta
-----END PGP SIGNATURE-----
Merge tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux into fixes
Pull "Reset controller fixes for v4.10" from Philipp Zabel:
- Remove erroneous negation of the error check of the reset function
to decrement trigger_count in the error case, not on success. This
fixes shared resets to actually only trigger once, as intended.
* tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux:
reset: fix shared reset triggered_count decrement on error
call spi_master_put() in case of failures after spi_alloc_master().
call pm_runtime_disable() in case of failures after pm_runtime_enable().
Signed-off-by: Prahlad V <prahlad.eee@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For a shared reset, when the reset is successful, the triggered_count is
incremented when trying to call the reset callback, so that another device
sharing the same reset line won't trigger it again. If the reset has not
been triggered successfully, the trigger_count should be decremented.
The code does the opposite, and decrements the trigger_count on success.
As a consequence, another device sharing the reset will be able to trigger
it again.
Fixed be removing negation in from of the error code of the reset function.
Fixes: 7da33a37b4 ("reset: allow using reset_control_reset with shared reset")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On Skylake hardware, the link_poll isn't clearing the pending interrupt
bit. Adding a new function for SKX that handles clearing of status bit the
right way.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 783dfa6c ("ntb: Adding Skylake Xeon NTB support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Fix typo causing ntb_transport_create_queue to select the first
queue every time, instead of using the next free queue.
Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: fce8a7bb5 ("PCI-Express Non-Transparent Bridge Support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
In the normal I/O execution path, ntb_perf is missing a call to
dmaengine_unmap_put() after submission. That causes us to leak
unmap objects.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 8a7b6a77 ("ntb: ntb perf tool")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The call to debugfs_remove_recursive(qp->debugfs_dir) of the sub-level
directory must not be later than
debugfs_remove_recursive(nt_debugfs_dir) of the top-level directory.
Otherwise, the sub-level directory will not exist, and it would be
invalid (panic) to attempt to remove it. This removes the top-level
directory last, after sub-level directories have been cleaned up.
Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: e26a5843f ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
-----BEGIN PGP SIGNATURE-----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=csQz
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.10-final' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just two last minute fixes, one for DP MST oopses and one for a radeon
regression"
* tag 'drm-fixes-for-v4.10-final' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor
drm/dp/mst: fix kernel oops when turning off secondary monitor
One regression fix for interlaced modes on radeon
* 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor
This reverts commit 24b91e360e and commit
7bdb59f1ad ("tick/nohz: Fix possible missing clock reprog after tick
soft restart") that depends on it,
Pavel reports that it causes occasional boot hangs for him that seem to
depend on just how the machine was booted. In particular, his machine
hangs at around the PCI fixups of the EHCI USB host controller, but only
hangs from cold boot, not from a warm boot.
Thomas Gleixner suspecs it's a CPU hotplug interaction, particularly
since Pavel also saw suspend/resume issues that seem to be related.
We're reverting for now while trying to figure out the root cause.
Reported-bisected-and-tested-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org # reverted commits were marked for stable
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This driver requires a GPIO line to be used for the chip select of
each SPI device.
Remove the ep93xx_spi_chip_ops definition from the platform data
and use the spi core GPIO handling for the chip selects.
Fix all the ep93xx platforms that use this driver and remove the
old Documentation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Changes to make tools/{perf,lib/{bpf,traceevent,api}} build with
CC=clang, to, for instance, take advantage of warnings (Arnaldo Carvalho de Melo):
- Conditionally request some warning options not available on clang
- Set the maximum optimization level to -O3 when using CC=clang, leave
the previous setting of -O6 otherwise.
- Make it an error to pass a signed value to OPTION_UINTEGER, so that
we can remove abs(unsigned int) calls in 'perf bench futex'.
- Make sure dprintf() is not defined before using that name in 'perf bench numa'
- Avoid using field after variable sized type, its a GNU extension, use
equivalent code.
- Fix some bugs where some variables could be used unitialized,
something not caught by gcc.
- Fix some spots where we were testing struct->array[] members against
NULL, it will always evaluate to 'true'.
- Add missing parse_events_error() prototype in the bison file.
There are still one problem when trying to build the python support, but
this are the 'size' outputs for 'make -C tools/perf NO_LIBPYTHON' for
gcc and clang builds:
DW_AT_producer: clang version 4.0.0 (http://llvm.org/git/clang.git f5be8ba13adc4ba1011a7ccd60c844bd60427c1c) (ht
$ size ~/bin/perf
text data bss dec hex filename
3447514 831320 23901696 28180530 1ae0032 /home/acme/bin/perf
DW_AT_producer: GNU C99 6.3.1 20161221 (Red Hat 6.3.1-1) -mtune=generic -march=x86-64 -ggdb3 -O6 -std=gnu99
+-fno-omit-frame-pointer -funwind-tables -fstack-protector-all
$ size ~/bin/perf
text data bss dec hex filename
3671662 836480 23902752 28410894 1b1840e /home/acme/bin/perf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ge2k
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.11-20170215' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core clang fixes from Arnaldo Carvalho de Melo:
Changes to make tools/{perf,lib/{bpf,traceevent,api}} build with
CC=clang, to, for instance, take advantage of warnings (Arnaldo Carvalho de Melo):
- Conditionally request some warning options not available on clang
- Set the maximum optimization level to -O3 when using CC=clang, leave
the previous setting of -O6 otherwise.
- Make it an error to pass a signed value to OPTION_UINTEGER, so that
we can remove abs(unsigned int) calls in 'perf bench futex'.
- Make sure dprintf() is not defined before using that name in 'perf bench numa'
- Avoid using field after variable sized type, its a GNU extension, use
equivalent code.
- Fix some bugs where some variables could be used unitialized,
something not caught by gcc.
- Fix some spots where we were testing struct->array[] members against
NULL, it will always evaluate to 'true'.
- Add missing parse_events_error() prototype in the bison file.
There are still one problem when trying to build the python support, but
this are the 'size' outputs for 'make -C tools/perf NO_LIBPYTHON' for
gcc and clang builds:
DW_AT_producer: clang version 4.0.0 (http://llvm.org/git/clang.git f5be8ba13adc4ba1011a7ccd60c844bd60427c1c) (ht
$ size ~/bin/perf
text data bss dec hex filename
3447514 831320 23901696 28180530 1ae0032 /home/acme/bin/perf
DW_AT_producer: GNU C99 6.3.1 20161221 (Red Hat 6.3.1-1) -mtune=generic -march=x86-64 -ggdb3 -O6 -std=gnu99
+-fno-omit-frame-pointer -funwind-tables -fstack-protector-all
$ size ~/bin/perf
text data bss dec hex filename
3671662 836480 23902752 28410894 1b1840e /home/acme/bin/perf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Enabling both DEBUG_WX=y and KASAN=y options significantly increases
boot time (dozens of seconds at least).
KASAN fills kernel page tables with repeated values to map several
TBs of the virtual memory to the single kasan_zero_page:
kasan_zero_pud ->
kasan_zero_pmd->
kasan_zero_pte->
kasan_zero_page
So, the page table walker used to find W+X mapping check the same
kasan_zero_p?d page table entries a lot more than once.
With patch pud walker will skip the pud if it has the same value as
the previous one . Skipping done iff we search for W+X mappings,
so this optimization won't affect the page table dump via debugfs.
This dropped time spend in W+X check from ~30 sec to reasonable 0.1 sec:
Before:
[ 4.579991] Freeing unused kernel memory: 1000K
[ 35.257523] x86/mm: Checked W+X mappings: passed, no W+X pages found.
After:
[ 5.138756] Freeing unused kernel memory: 1000K
[ 5.266496] x86/mm: Checked W+X mappings: passed, no W+X pages found.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: kasan-dev@googlegroups.com
Cc: Tobias Regnery <tobias.regnery@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/20170214100839.17186-1-aryabinin@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch replaced "n" by "len" bytes of data in qspi_transfer_in() and
qspi_transfer_out() function. This will make improving readability.
Signed-off-by: DongCV <cv-dong@jinso.co.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
In qspi_transfer_in(), when receiving the last n (or len) bytes of data,
one bogus byte was written in the receive buffer.
This code leads to a buffer overflow.
"jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x03b40000: 0x1900 instead
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x03b40004: 0x000c instead"
The error message above happens when trying to mount, unmount,
and remount a jffs2-formatted device.
This patch removed the bogus write to fixes: 3be09bec42
"spi: rspi: supports 32bytes buffer for DUAL and QUAD"
And here is Geert's comment:
"spi: rspi: Fix bogus received byte in qspi_transfer_in()
When there are less than QSPI_BUFFER_SIZE remaining bytes to be received,
qspi_transfer_in() writes one bogus byte in the receive buffer, possibly
leading to a buffer overflow.
This can be reproduced by mounting, unmounting, and remounting a
jffs2-formatted device, causing lots of warnings like:
"jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x03b40000: 0x1900 instead"
Remove the bogus write to fix this. "
Signed-off-by: DongCV <cv-dong@jinso.co.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----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=aXBS
-----END PGP SIGNATURE-----
Merge tag 'media/v4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"A regression fix that makes the Siano driver to work again after the
CONFIG_VMAP_STACK change"
* tag 'media/v4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] siano: make it work again with CONFIG_VMAP_STACK
After commit 66d228a2bf ("regulator: core: Don't use regulators as
supplies until the parent is bound"), input supplies aren't resolved
if the input supplies parent device has not been bound. This prevent
regulators to hold an invalid reference if its supply parent device
driver probe is deferred.
But this causes issues on some boards where a PMIC's regulator use as
input supply a regulator from another PMIC whose driver is registered
after the driver for the former.
In this case the regulators for the first PMIC will fail to resolve
input supplies on regulators registration (since the other PMIC wasn't
probed yet). And when the core attempts to resolve again latter when
the other PMIC registers its own regulators, it will fail again since
the parent device isn't bound yet.
This will cause some parent supplies to never be resolved and wrongly
be disabled on boot due taking them as unused.
To solve this problem, also attempt to resolve the pending regulators
input supplies before disabling the unused regulators.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the
unused part of the pipe ring buffer. Previously splice_to_pipe() left
the flags value alone, which could result in incorrect behavior.
Uninitialized flags appears to have been there from the introduction of
the splice syscall.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # 2.6.17+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull fuse fixes from Miklos Szeredi:
"Fix a use after free bug introduced in 4.2 and using an uninitialized
value introduced in 4.9"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix uninitialized flags in pipe_buffer
fuse: fix use after free issue in fuse_dev_do_read()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+P65
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.10-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Add back pcie_pme_remove() so we free the IRQ when removing PCIe port
devices; previously the leaked IRQ caused an MSI BUG_ON"
* tag 'pci-v4.10-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/PME: Restore pcie_pme_driver.remove
Pull networking fixes from David Miller:
1) In order to avoid problems in the future, make cgroup bpf overriding
explicit using BPF_F_ALLOW_OVERRIDE. From Alexei Staovoitov.
2) LLC sets skb->sk without proper skb->destructor and this explodes,
fix from Eric Dumazet.
3) Make sure when we have an ipv4 mapped source address, the
destination is either also an ipv4 mapped address or
ipv6_addr_any(). Fix from Jonathan T. Leighton.
4) Avoid packet loss in fec driver by programming the multicast filter
more intelligently. From Rui Sousa.
5) Handle multiple threads invoking fanout_add(), fix from Eric
Dumazet.
6) Since we can invoke the TCP input path in process context, without
BH being disabled, we have to accomodate that in the locking of the
TCP probe. Also from Eric Dumazet.
7) Fix erroneous emission of NETEVENT_DELAY_PROBE_TIME_UPDATE when we
aren't even updating that sysctl value. From Marcus Huewe.
8) Fix endian bugs in ibmvnic driver, from Thomas Falcon.
[ This is the second version of the pull that reverts the nested
rhashtable changes that looked a bit too scary for this late in the
release - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
rhashtable: Revert nested table changes.
ibmvnic: Fix endian errors in error reporting output
ibmvnic: Fix endian error when requesting device capabilities
net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notification
net: xilinx_emaclite: fix freezes due to unordered I/O
net: xilinx_emaclite: fix receive buffer overflow
bpf: kernel header files need to be copied into the tools directory
tcp: tcp_probe: use spin_lock_bh()
uapi: fix linux/if_pppol2tp.h userspace compilation errors
packet: fix races in fanout_add()
ibmvnic: Fix initial MTU settings
net: ethernet: ti: cpsw: fix cpsw assignment in resume
kcm: fix a null pointer dereference in kcm_sendmsg()
net: fec: fix multicast filtering hardware setup
ipv6: Handle IPv4-mapped src to in6addr_any dst.
ipv6: Inhibit IPv4-mapped src address on the wire.
net/mlx5e: Disable preemption when doing TC statistics upcall
rhashtable: Add nested tables
tipc: Fix tipc_sk_reinit race conditions
gfs2: Use rhashtable walk interface in glock_hash_walk
...
The crtc_h/vdisplay fields may not match the CRTC viewport dimensions
with special modes such as interlaced ones.
Fixes the HW cursor disappearing in the bottom half of the screen with
interlaced modes.
Fixes: 6b16cf7785 ("drm/radeon: Hide the HW cursor while it's out of bounds")
Cc: stable@vger.kernel.org
Reported-by: Ashutosh Kumar <ashutosh.kumar@amd.com>
Tested-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 64-bit get_user() wasn't clearing the high word due to a typo in the
error handler. The exception handler entry was already correct, though.
Noticed during recent usercopy test additions in lib/test_user_copy.c.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
In commit 76624175dc ("arm64: uaccess: consistently check object sizes"),
the object size checks are moved outside the access_ok() so that bad
destinations are detected before hitting the "memset(dest, 0, size)" in the
copy_from_user() failure path.
This makes the same change for arm, with attention given to possibly
extracting the uaccess routines into a common header file for all
architectures in the future.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
wbt_disable_default() calls del_timer_sync() to wait for the wbt
timer to finish before disabling throttling. We can't do this with
IRQs disable. This fixes a lockdep splat on boot, if non-root
cgroups are used.
Reported-by: Gabriel C <nix.or.die@gmail.com>
Fixes: 87760e5eef ("block: hook up writeback throttling")
Signed-off-by: Jens Axboe <axboe@fb.com>
Allow the driver to work with device tree support.
Based on initial patch submission from Peter Fox.
Tested on a imx7d-sdb board connected to a SHT15 board via Mikro Bus.
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Currently, the IPID and Syndrome are printed on the same line as the
Address. There are cases when we can have a valid Syndrome but not a
valid Address.
For example, the MCA_SYND register can be used to hold more detailed
error info that the hardware folks can use. It's not just DRAM ECC
syndromes. There are some error types that aren't related to memory that
may have valid syndromes, like some errors related to links in the Data
Fabric, etc.
In these cases, the IPID and Syndrome are not printed at the same log
level as the rest of the stanza, so users won't see them on the console.
Console:
[Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b
[Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2
Dmesg:
[Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b
, Syndrome: 0x000000010b404000, IPID: 0x0001002e00000002
[Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2
Print the IPID first and on a new line. The IPID should always be
printed on SMCA systems. The Syndrome will then be printed with the IPID
and at the same log level when valid:
[Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b
[Hardware Error]: IPID: 0x0001002e00000002, Syndrome: 0x000000010b404000
[Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1487192182-2474-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Although irqreturn_t is an enum, we treat it (and its enumeration
constants) as a bitmask.
However, bad_action_ret() uses a less-than operator to determine whether
an irqreturn_t falls within allowable bit values, which means we need to
know the signededness of an enum type to read the logic, which is
implementation-dependent.
This change explicitly uses an unsigned type for the comparison. We do
this instead of changing to a bitwise test, as the latter compiles to
increased instructions in this hot path.
It looks like we get the correct behaviour currently (bad_action_ret(-1)
returns 1), so this is purely a readability fix.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Link: http://lkml.kernel.org/r/1487219049-4061-1-git-send-email-jk@ozlabs.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
A bug fix to the MSIx handling in vfio added references to functions
that may not be defined if MSI is disabled in the kernel, resulting in
this link error:
drivers/built-in.o: In function `vfio_msi_set_vector_signal':
:(.text+0x450808): undefined reference to `get_cached_msi_msg'
:(.text+0x45080c): undefined reference to `write_msi_msg'
As suggested by Alex Williamson, add stub implementations for
get_cached_msi_msg() and pci_write_msi_msg().
In case this bugfix gets backported, please note that the #ifdef
has changed over time, originally both functions were implemented
in drivers/pci/msi.c and controlled by CONFIG_PCI_MSI, while nowadays
get_cached_msi_msg() is part of the generic MSI support and can be
used without PCI.
Fixes: b8f02af096 ("vfio/pci: Restore MSIx message prior to enabling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Link: http://lkml.kernel.org/r/1413190208.4202.34.camel@ul30vt.home
Link: http://lkml.kernel.org/r/20170214215343.3307861-1-arnd@arndb.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It is allowed to call regulator_get with a NULL dev argument
(_regulator_get explicitly checks for it) but this causes an error later
when printing /sys/kernel/debug/regulator_summary.
Fix this by explicitly handling "deviceless" consumers in the debugfs code.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The addition of support for UV Hubless systems unneccessarily broke
the kABI for a symbol that is not used by external kernel modules.
Remove the symbol from the EXPORT list.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Reviewed-by: Russ Anderson <russ.anderson@hpe.com>
Link: http://lkml.kernel.org/r/20170215001129.068078379@asylum.americas.sgi.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This reverts commits:
6a254780779dbbfb0ab640137906c5
It's too risky to put in this late in the release
cycle. We'll put these changes into the next merge
window instead.
Signed-off-by: David S. Miller <davem@davemloft.net>
dp/mst oops fix for v4.10
* tag 'drm-misc-fixes-2017-02-15' of git://anongit.freedesktop.org/git/drm-misc:
drm/dp/mst: fix kernel oops when turning off secondary monitor
Currently, if the kernel is running on a POWER9 processor under a
hypervisor, it may try to use the radix MMU even though it doesn't have
the necessary code to do so (it doesn't negotiate use of radix, and it
doesn't do the H_REGISTER_PROC_TBL hcall). If the hypervisor supports
both radix and HPT, then it will set up the guest to use HPT (since the
guest doesn't request radix in the CAS call), but if the radix feature
bit is set in the ibm,pa-features property (which is valid, since
ibm,pa-features is defined to represent the capabilities of the
processor) the guest will try to use radix, resulting in a crash when
it turns the MMU on.
This makes the minimal fix for the current code, which is to disable
radix unless we are running in hypervisor mode.
Fixes: 2bfd65e45e ("powerpc/mm/radix: Add radix callbacks for early init routines")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Without the Kconfig dependency, we can get this warning:
warning: ACPI_CPPC_CPUFREQ selects ACPI_CPPC_LIB which has unmet direct dependencies (ACPI && ACPI_PROCESSOR)
Fixes: 5477fb3bd1 (ACPI / CPPC: Add a CPUFreq driver for use with CPPC)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Kconfig currently controlling compilation of this code is:
drivers/cpufreq/Kconfig.arm:config ARM_TI_CPUFREQ
drivers/cpufreq/Kconfig.arm: bool "Texas Instruments CPUFreq support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If new_policy is set in cpufreq_online(), the policy object has just
been created and its real_cpus mask has been zeroed on allocation,
and the driver's ->init() callback should not touch it.
It doesn't need to be cleared again, so don't do that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
This utility can be used to debug and tune the performance of the
intel_pstate driver.
This utility can be used in two ways:
- If there is Linux trace file with pstate_sample events enabled, then
this utility can parse the trace file and generate performance plots.
- If user has not specified a trace file as input via command line
parameters, then this utility enables and collects trace data for a
user-specified interval and generates performance plots.
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Error reports received from firmware were not being converted from
big endian values, leading to bogus error codes reported on little
endian systems.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a vNIC client driver requests a faulty device setting, the
server returns an acceptable value for the client to request.
This 64 bit value was incorrectly being swapped as a 32 bit value,
resulting in loss of data. This patch corrects that by using
the 64 bit swap function.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When setting a neigh related sysctl parameter, we always send a
NETEVENT_DELAY_PROBE_TIME_UPDATE netevent. For instance, when
executing
sysctl net.ipv6.neigh.wlp3s0.retrans_time_ms=2000
a NETEVENT_DELAY_PROBE_TIME_UPDATE netevent is generated.
This is caused by commit 2a4501ae18 ("neigh: Send a
notification when DELAY_PROBE_TIME changes"). According to the
commit's description, it was intended to generate such an event
when setting the "delay_first_probe_time" sysctl parameter.
In order to fix this, only generate this event when actually
setting the "delay_first_probe_time" sysctl parameter. This fix
should not have any unintended side-effects, because all but one
registered netevent callbacks check for other netevent event
types (the registered callbacks were obtained by grepping for
"register_netevent_notifier"). The only callback that uses the
NETEVENT_DELAY_PROBE_TIME_UPDATE event is
mlxsw_sp_router_netevent_event() (in
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c): in case
of this event, it only accesses the DELAY_PROBE_TIME of the
passed neigh_parms.
Fixes: 2a4501ae18 ("neigh: Send a notification when DELAY_PROBE_TIME changes")
Signed-off-by: Marcus Huewe <suse-tux@gmx.de>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds
Dan Carpenter
Arnd Bergmann
Anoob Soman
Prahlad V
Jerome Brunet
Dave Jiang
Thomas VanSelus
Allen Hubbe
Dave Airlie
H Hartley Sweeten
Ingo Molnar
Andrey Ryabinin
Thomas Gleixner
DongCV
Javier Martinez Canillas
Miklos Szeredi
Michel Dänzer
Kees Cook
Jens Axboe
Marco Franchi
Yazen Ghannam
Jeremy Kerr
Leonard Crestez
travis@sgi.com
David S. Miller
Paul Mackerras
Paul Gortmaker
Rafael J. Wysocki
Doug Smythies
Todd E Brandt
Thomas Falcon
Marcus Huewe