Граф коммитов

20 Коммитов

Автор SHA1 Сообщение Дата
Stefano Stabellini cb6f6b3384 xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.h
Move xen_swiotlb_detect to a static inline function to make it available
to !CONFIG_XEN builds.

CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210512201823.1963-1-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
2021-05-14 15:52:05 +02:00
Stefano Stabellini f5079a9a2a xen/arm: introduce XENFEAT_direct_mapped and XENFEAT_not_direct_mapped
Newer Xen versions expose two Xen feature flags to tell us if the domain
is directly mapped or not. Only when a domain is directly mapped it
makes sense to enable swiotlb-xen on ARM.

Introduce a function on ARM to check the new Xen feature flags and also
to deal with the legacy case. Call the function xen_swiotlb_detect.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210319200140.12512-1-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
2021-04-23 11:33:50 +02:00
Masami Hiramatsu 5a0677110b arm/arm64: xen: Fix to convert percpu address to gfn correctly
Use per_cpu_ptr_to_phys() instead of virt_to_phys() for per-cpu
address conversion.

In xen_starting_cpu(), per-cpu xen_vcpu_info address is converted
to gfn by virt_to_gfn() macro. However, since the virt_to_gfn(v)
assumes the given virtual address is in linear mapped kernel memory
area, it can not convert the per-cpu memory if it is allocated on
vmalloc area.

This depends on CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK.
If it is enabled, the first chunk of percpu memory is linear mapped.
In the other case, that is allocated from vmalloc area. Moreover,
if the first chunk of percpu has run out until allocating
xen_vcpu_info, it will be allocated on the 2nd chunk, which is
based on kernel memory or vmalloc memory (depends on
CONFIG_NEED_PER_CPU_KM).

Without this fix and kernel configured to use vmalloc area for
the percpu memory, the Dom0 kernel will fail to boot with following
errors.

[    0.466172] Xen: initializing cpu0
[    0.469601] ------------[ cut here ]------------
[    0.474295] WARNING: CPU: 0 PID: 1 at arch/arm64/xen/../../arm/xen/enlighten.c:153 xen_starting_cpu+0x160/0x180
[    0.484435] Modules linked in:
[    0.487565] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #4
[    0.493895] Hardware name: Socionext Developer Box (DT)
[    0.499194] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--)
[    0.504836] pc : xen_starting_cpu+0x160/0x180
[    0.509263] lr : xen_starting_cpu+0xb0/0x180
[    0.513599] sp : ffff8000116cbb60
[    0.516984] x29: ffff8000116cbb60 x28: ffff80000abec000
[    0.522366] x27: 0000000000000000 x26: 0000000000000000
[    0.527754] x25: ffff80001156c000 x24: fffffdffbfcdb600
[    0.533129] x23: 0000000000000000 x22: 0000000000000000
[    0.538511] x21: ffff8000113a99c8 x20: ffff800010fe4f68
[    0.543892] x19: ffff8000113a9988 x18: 0000000000000010
[    0.549274] x17: 0000000094fe0f81 x16: 00000000deadbeef
[    0.554655] x15: ffffffffffffffff x14: 0720072007200720
[    0.560037] x13: 0720072007200720 x12: 0720072007200720
[    0.565418] x11: 0720072007200720 x10: 0720072007200720
[    0.570801] x9 : ffff8000100fbdc0 x8 : ffff800010715208
[    0.576182] x7 : 0000000000000054 x6 : ffff00001b790f00
[    0.581564] x5 : ffff800010bbf880 x4 : 0000000000000000
[    0.586945] x3 : 0000000000000000 x2 : ffff80000abec000
[    0.592327] x1 : 000000000000002f x0 : 0000800000000000
[    0.597716] Call trace:
[    0.600232]  xen_starting_cpu+0x160/0x180
[    0.604309]  cpuhp_invoke_callback+0xac/0x640
[    0.608736]  cpuhp_issue_call+0xf4/0x150
[    0.612728]  __cpuhp_setup_state_cpuslocked+0x128/0x2c8
[    0.618030]  __cpuhp_setup_state+0x84/0xf8
[    0.622192]  xen_guest_init+0x324/0x364
[    0.626097]  do_one_initcall+0x54/0x250
[    0.630003]  kernel_init_freeable+0x12c/0x2c8
[    0.634428]  kernel_init+0x1c/0x128
[    0.637988]  ret_from_fork+0x10/0x18
[    0.641635] ---[ end trace d95b5309a33f8b27 ]---
[    0.646337] ------------[ cut here ]------------
[    0.651005] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:158!
[    0.657697] Internal error: Oops - BUG: 0 [#1] SMP
[    0.662548] Modules linked in:
[    0.665676] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W         5.9.0-rc4+ #4
[    0.673398] Hardware name: Socionext Developer Box (DT)
[    0.678695] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--)
[    0.684338] pc : xen_starting_cpu+0x178/0x180
[    0.688765] lr : xen_starting_cpu+0x144/0x180
[    0.693188] sp : ffff8000116cbb60
[    0.696573] x29: ffff8000116cbb60 x28: ffff80000abec000
[    0.701955] x27: 0000000000000000 x26: 0000000000000000
[    0.707344] x25: ffff80001156c000 x24: fffffdffbfcdb600
[    0.712718] x23: 0000000000000000 x22: 0000000000000000
[    0.718107] x21: ffff8000113a99c8 x20: ffff800010fe4f68
[    0.723481] x19: ffff8000113a9988 x18: 0000000000000010
[    0.728863] x17: 0000000094fe0f81 x16: 00000000deadbeef
[    0.734245] x15: ffffffffffffffff x14: 0720072007200720
[    0.739626] x13: 0720072007200720 x12: 0720072007200720
[    0.745008] x11: 0720072007200720 x10: 0720072007200720
[    0.750390] x9 : ffff8000100fbdc0 x8 : ffff800010715208
[    0.755771] x7 : 0000000000000054 x6 : ffff00001b790f00
[    0.761153] x5 : ffff800010bbf880 x4 : 0000000000000000
[    0.766534] x3 : 0000000000000000 x2 : 00000000deadbeef
[    0.771916] x1 : 00000000deadbeef x0 : ffffffffffffffea
[    0.777304] Call trace:
[    0.779819]  xen_starting_cpu+0x178/0x180
[    0.783898]  cpuhp_invoke_callback+0xac/0x640
[    0.788325]  cpuhp_issue_call+0xf4/0x150
[    0.792317]  __cpuhp_setup_state_cpuslocked+0x128/0x2c8
[    0.797619]  __cpuhp_setup_state+0x84/0xf8
[    0.801779]  xen_guest_init+0x324/0x364
[    0.805683]  do_one_initcall+0x54/0x250
[    0.809590]  kernel_init_freeable+0x12c/0x2c8
[    0.814016]  kernel_init+0x1c/0x128
[    0.817583]  ret_from_fork+0x10/0x18
[    0.821226] Code: d0006980 f9427c00 cb000300 17ffffea (d4210000)
[    0.827415] ---[ end trace d95b5309a33f8b28 ]---
[    0.832076] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    0.839815] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/160196697165.60224.17470743378683334995.stgit@devnote2
Signed-off-by: Juergen Gross <jgross@suse.com>
2020-10-07 07:08:43 +02:00
Simon Leiner 9d3004bf7b arm/xen: Add misuse warning to virt_to_gfn
As virt_to_gfn uses virt_to_phys, it will return invalid addresses when
used with vmalloc'd addresses. This patch introduces a warning, when
virt_to_gfn is used in this way.

Signed-off-by: Simon Leiner <simon@leiner.me>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20200825093153.35500-2-simon@leiner.me
Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-27 08:58:51 +02:00
Mike Rapoport 65fddcfca8 mm: reorder includes after introduction of linux/pgtable.h
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s <file> <header>" % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include <linux/%s>" % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include <linux/"):
		    in_hdrs = True
		elif not moved and in_hdrs:
		    moved = True
		    print hdr_to_move
		print line

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Mike Rapoport ca5999fde0 mm: introduce include/linux/pgtable.h
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Christoph Hellwig b4dca15129 swiotlb-xen: simplify cache maintainance
Now that we know we always have the dma-noncoherent.h helpers available
if we are on an architecture with support for non-coherent devices,
we can just call them directly, and remove the calls to the dma-direct
routines, including the fact that we call the dma_direct_map_page
routines but ignore the value returned from it.  Instead we now have
Xen wrappers for the arch_sync_dma_for_{device,cpu} helpers that call
the special Xen versions of those routines for foreign pages.

Note that the new helpers get the physical address passed in addition
to the dma address to avoid another translation for the local cache
maintainance.  The pfn_valid checks remain on the dma address as in
the old code, even if that looks a little funny.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-09-11 12:43:27 +02:00
Christoph Hellwig c9b6180dbf swiotlb-xen: use the same foreign page check everywhere
xen_dma_map_page uses a different and more complicated check for foreign
pages than the other three cache maintainance helpers.  Switch it to the
simpler pfn_valid method a well, and document the scheme with a single
improved comment in xen_dma_map_page.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11 12:43:27 +02:00
Christoph Hellwig 0e0d26e779 xen/arm: remove xen_dma_ops
arm and arm64 can just use xen_swiotlb_dma_ops directly like x86, no
need for a pointer indirection.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11 12:43:26 +02:00
Christoph Hellwig bef4d2037d xen/arm: consolidate page-coherent.h
Shared the duplicate arm/arm64 code in include/xen/arm/page-coherent.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11 12:43:22 +02:00
Christoph Hellwig 60d8cd572f arm64/xen: fix xen-swiotlb cache flushing
Xen-swiotlb hooks into the arm/arm64 arch code through a copy of the DMA
DMA mapping operations stored in the struct device arch data.

Switching arm64 to use the direct calls for the merged DMA direct /
swiotlb code broke this scheme.  Replace the indirect calls with
direct-calls in xen-swiotlb as well to fix this problem.

Fixes: 356da6d0cd ("dma-mapping: bypass indirect calls for dma-direct")
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-01-23 22:14:56 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Tycho Andersen 0555ac4333 xen, arm64: drop dummy lookup_address()
This is unused, and conflicts with the definition that we'll add for XPFO.

Signed-off-by: Tycho Andersen <tycho@docker.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: Juergen Gross <jgross@suse.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-09-19 09:25:05 -04:00
Sergey Dyasli a2237ae761 xen: fix HYPERVISOR_dm_op() prototype
Change the third parameter to be the required struct xen_dm_op_buf *
instead of a generic void * (which blindly accepts any pointer).

Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
2017-06-08 19:40:14 +02:00
Stefano Stabellini d5ff5061c3 xen/arm,arm64: rename __generic_dma_ops to xen_get_dma_ops
Now that __generic_dma_ops is a xen specific function, rename it to
xen_get_dma_ops. Change all the call sites appropriately.

Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: linux@armlinux.org.uk
CC: catalin.marinas@arm.com
CC: will.deacon@arm.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: Julien Grall <julien.grall@arm.com>
2017-05-02 11:14:47 +02:00
Stefano Stabellini e058632670 xen/arm,arm64: fix xen_dma_ops after 815dd18 "Consolidate get_dma_ops..."
The following commit:

  commit 815dd18788
  Author: Bart Van Assche <bart.vanassche@sandisk.com>
  Date:   Fri Jan 20 13:04:04 2017 -0800

      treewide: Consolidate get_dma_ops() implementations

rearranges get_dma_ops in a way that xen_dma_ops are not returned when
running on Xen anymore, dev->dma_ops is returned instead (see
arch/arm/include/asm/dma-mapping.h:get_arch_dma_ops and
include/linux/dma-mapping.h:get_dma_ops).

Fix the problem by storing dev->dma_ops in dev_archdata, and setting
dev->dma_ops to xen_dma_ops. This way, xen_dma_ops is returned naturally
by get_dma_ops. The Xen code can retrieve the original dev->dma_ops from
dev_archdata when needed. It also allows us to remove __generic_dma_ops
from common headers.

Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Julien Grall <julien.grall@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>        [4.11+]
CC: linux@armlinux.org.uk
CC: catalin.marinas@arm.com
CC: will.deacon@arm.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: Julien Grall <julien.grall@arm.com>
2017-05-02 11:14:42 +02:00
Linus Torvalds ac1820fb28 This is a tree wide change and has been kept separate for that reason.
Bart Van Assche noted that the ib DMA mapping code was significantly
 similar enough to the core DMA mapping code that with a few changes
 it was possible to remove the IB DMA mapping code entirely and
 switch the RDMA stack to use the core DMA mapping code.  This resulted
 in a nice set of cleanups, but touched the entire tree.  This branch
 will be submitted separately to Linus at the end of the merge window
 as per normal practice for tree wide changes like this.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYo06oAAoJELgmozMOVy/d9Z8QALedWHdu98St1L0u2c8sxnR9
 2zo/4sF5Vb9u7FpmdIX32L4SQ9s9KhPE8Qp8NtZLf9v10zlDebIRJDpXknXtKooV
 CAXxX4sxBXV27/UrhbZEfXiPrmm6ccJFyIfRnMU6NlMqh2AtAsRa5AC2/RMp8oUD
 Med97PFiF0o6TD22/UH1VFbRpX1zjaKyqm7a3as5sJfzNA+UGIZAQ7Euz8000DKZ
 xCgVLTEwS0FmOujtBkCst7xa9TjuqR1HLOB4DdGvAhP6BHdz2yamM7Qmh9NN+NEX
 0BtjsuXomtn6j6AszGC+bpipCZh3NUigcwoFAARXCYFHibBvo4DPdFeGsraFgXdy
 1+KyR8CCeQG3Aly5Vwr264RFPGkGpwMj8PsBlXgQVtrlg4rriaCzOJNmIIbfdADw
 ftqhxBOzReZw77aH2s+9p2ILRfcAmPqhynLvFGFo9LBvsik8LVso7YgZN0xGxwcI
 IjI/XGC8UskPVsIZBIYA6sl2bYzgOjtBIHiXjRrPlW3uhduIXLrvKFfLPP/5XLAG
 ehLXK+J0bfsyY9ClmlNS8oH/WdLhXAyy/KNmnj5bRRm9qg6BRJR3bsOBhZJODuoC
 XgEXFfF6/7roNESWxowff7pK0rTkRg/m/Pa4VQpeO+6NWHE7kgZhL6kyIp5nKcwS
 3e7mgpcwC+3XfA/6vU3F
 =e0Si
 -----END PGP SIGNATURE-----

Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma DMA mapping updates from Doug Ledford:
 "Drop IB DMA mapping code and use core DMA code instead.

  Bart Van Assche noted that the ib DMA mapping code was significantly
  similar enough to the core DMA mapping code that with a few changes it
  was possible to remove the IB DMA mapping code entirely and switch the
  RDMA stack to use the core DMA mapping code.

  This resulted in a nice set of cleanups, but touched the entire tree
  and has been kept separate for that reason."

* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
  IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
  IB/core: Remove ib_device.dma_device
  nvme-rdma: Switch from dma_device to dev.parent
  RDS: net: Switch from dma_device to dev.parent
  IB/srpt: Modify a debug statement
  IB/srp: Switch from dma_device to dev.parent
  IB/iser: Switch from dma_device to dev.parent
  IB/IPoIB: Switch from dma_device to dev.parent
  IB/rxe: Switch from dma_device to dev.parent
  IB/vmw_pvrdma: Switch from dma_device to dev.parent
  IB/usnic: Switch from dma_device to dev.parent
  IB/qib: Switch from dma_device to dev.parent
  IB/qedr: Switch from dma_device to dev.parent
  IB/ocrdma: Switch from dma_device to dev.parent
  IB/nes: Remove a superfluous assignment statement
  IB/mthca: Switch from dma_device to dev.parent
  IB/mlx5: Switch from dma_device to dev.parent
  IB/mlx4: Switch from dma_device to dev.parent
  IB/i40iw: Remove a superfluous assignment statement
  IB/hns: Switch from dma_device to dev.parent
  ...
2017-02-25 13:45:43 -08:00
Paul Durrant ab520be8cd xen/privcmd: Add IOCTL_PRIVCMD_DM_OP
Recently a new dm_op[1] hypercall was added to Xen to provide a mechanism
for restricting device emulators (such as QEMU) to a limited set of
hypervisor operations, and being able to audit those operations in the
kernel of the domain in which they run.

This patch adds IOCTL_PRIVCMD_DM_OP as gateway for __HYPERVISOR_dm_op.

NOTE: There is no requirement for user-space code to bounce data through
      locked memory buffers (as with IOCTL_PRIVCMD_HYPERCALL) since
      privcmd has enough information to lock the original buffers
      directly.

[1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=524a98c2

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-02-14 15:13:43 -05:00
Bart Van Assche 5299709d0a treewide: Constify most dma_map_ops structures
Most dma_map_ops structures are never modified. Constify these
structures such that these can be write-protected. This patch
has been generated as follows:

git grep -l 'struct dma_map_ops' |
  xargs -d\\n sed -i \
    -e 's/struct dma_map_ops/const struct dma_map_ops/g' \
    -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \
    -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \
    -e 's/const const struct dma_map_ops /const struct dma_map_ops /g';
sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \
  $(git grep -l 'struct dma_map_ops intel_dma_ops');
sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \
  $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc);
sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \
       -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \
       -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \
    drivers/pci/host/*.c
sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c
sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c
sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Cc: x86@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24 12:23:35 -05:00
Marc Zyngier 2fbadc3002 arm/arm64: xen: Move shared architecture headers to include/xen/arm
ARM and arm64 Xen ports share a number of headers, leading to
packaging issues when these headers needs to be exported, as it
breaks the reasonable requirement that an architecture port
has self-contained headers.

Fix the issue by moving the 5 header files to include/xen/arm,
and keep local placeholders to include the relevant files.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2016-12-02 11:49:55 -08:00