We should set the pci driver data in probe instead of the vdpa device
adding callback. Otherwise if no vDPA device is created we will lose
the pointer to the management device.
Fixes: 6b5df347c6 ("vDPA/ifcvf: implement management netlink framework for ifcvf")
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220524055557.1938-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Static checkers are not informed that config_vector is controlled
by vf->msix_vector_status, which can only be
MSIX_VECTOR_SHARED_VQ_AND_CONFIG, MSIX_VECTOR_SHARED_VQ_AND_CONFIG
and MSIX_VECTOR_DEV_SHARED.
This commit uses an "if...elseif...else" code block to tell the
checkers that it is a complete set, and config_vector can be
initialized anyway
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20220424072806.1083189-1-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patches introduces the multiple address spaces support for vDPA
device. This idea is to identify a specific address space via an
dedicated identifier - ASID.
During vDPA device allocation, vDPA device driver needs to report the
number of address spaces supported by the device then the DMA mapping
ops of the vDPA device needs to be extended to support ASID.
This helps to isolate the environments for the virtqueue that will not
be assigned directly. E.g in the case of virtio-net, the control
virtqueue will not be assigned directly to guest.
As a start, simply claim 1 virtqueue groups and 1 address spaces for
all vDPA devices. And vhost-vDPA will simply reject the device with
more than 1 virtqueue groups or address spaces.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-7-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces virtqueue groups to vDPA device. The virtqueue
group is the minimal set of virtqueues that must share an address
space. And the address space identifier could only be attached to
a specific virtqueue group.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-6-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On some platforms/devices, there may not be enough MSI vectors
allocated for the virtqueues and config changes. In such a case,
the interrupt sources(virtqueues, config changes) must share
an IRQ/vector, to avoid initialization failures, keep
the device functional.
This commit handles three cases:
(1) number of the allocated vectors == the number of virtqueues + 1
(config changes), every virtqueue and the config interrupt has
a separated vector/IRQ, the best and the most likely case.
(2) number of the allocated vectors is less than the best case, but
greater than 1. In this case, all virtqueues share a vector/IRQ,
the config interrupt has a separated vector/IRQ
(3) only one vector is allocated, in this case, the virtqueues and
the config interrupt share a vector/IRQ. The worst and most
unlikely case.
Otherwise, it needs to fail.
This commit introduces some helper functions:
ifcvf_set_vq_vector() and ifcvf_set_config_vector() sets virtqueue
vector and config vector in the device config space, so that
the device can send interrupt DMA.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20220222115428.998334-5-lingshan.zhu@intel.com
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220315124130.1710030-1-trix@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide an interface to read the negotiated features. This is needed
when building the netlink message in vdpa_dev_net_config_fill().
Also fix the implementation of vdpa_dev_net_config_fill() to use the
negotiated features instead of the device features.
To make APIs clearer, make the following name changes to struct
vdpa_config_ops so they better describe their operations:
get_features -> get_device_features
set_features -> set_driver_features
Finally, add get_driver_features to return the negotiated features and
add implementation to all the upstream drivers.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit fixes a misuse of virtio-net device config size issue
for virtio-block devices.
A new member config_size in struct ifcvf_hw is introduced and would
be initialized through vdpa_dev_add() to record correct device
config size.
To be more generic, rename ifcvf_hw.net_config to ifcvf_hw.dev_config,
the helpers ifcvf_read/write_net_config() to ifcvf_read/write_dev_config()
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reported-and-suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 6ad31d162a ("vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211201081255.60187-1-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
$ vdpa dev config show -jp
{
"config": {
"bar": {
"mac": "00:11:22:33:44:55",
"link ": "up",
"link_announce ": false,
"mtu": 9000,
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch introduces an attribute for vDPA device to indicate
whether virtual address can be used. If vDPA device driver set
it, vhost-vdpa bus driver will not pin user page and transfer
userspace virtual address instead of physical address during
DMA mapping. And corresponding vma->vm_file and offset will be
also passed as an opaque pointer.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-11-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds a new callback to support device specific reset
behavior. The vdpa bus driver will call the reset function
instead of setting status to zero during resetting.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210831103634.33-6-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit enbales multi-queue and control vq
features for ifcvf
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20210818095714.3220-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
To enable this multi-queue feature for ifcvf, this commit
intends to detect and use the onboard number of queues
directly than IFCVF_MAX_QUEUE_PAIRS = 1 (removed)
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20210818095714.3220-2-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This commit implements the management netlink framework for ifcvf,
including register and add / remove a device
It works with iproute2:
[root@localhost lszhu]# vdpa mgmtdev show -jp
{
"mgmtdev": {
"pci/0000:01:00.5": {
"supported_classes": [ "net" ]
},
"pci/0000:01:00.6": {
"supported_classes": [ "net" ]
}
}
}
[root@localhost lszhu]# vdpa dev add mgmtdev pci/0000:01:00.5 name vdpa0
[root@localhost lszhu]# vdpa dev add mgmtdev pci/0000:01:00.6 name vdpa1
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210812032454.24486-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit introduces a new function get_dev_type() which returns
the virtio device id of a device, to avoid duplicated code.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210812032454.24486-2-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vdpa_alloc_device() returns an error pointer upon
failure, not NULL. To handle the failure correctly, this
replaces NULL check with IS_ERR() check and propagate the
error upwards.
Fixes: 5a2414bc45 ("virtio: Intel IFC VF driver for VDPA")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210715080026.242-3-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch extends the vdpa_vq_state to support packed virtqueue
state which is basically the device/driver ring wrap counters and the
avail and used index. This will be used for the virito-vdpa support
for the packed virtqueue and the future vhost/vhost-vdpa support for
the packed virtqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210602021536.39525-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
This commit implements doorbell mapping feature for ifcvf.
This feature maps the notify page to userspace, to eliminate
vmexit when kick a vq.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20210602084550.289599-3-lingshan.zhu@intel.com
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit records virtio notify base physical addr and
calculate doorbell physical address for vqs.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210602084550.289599-2-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
get_config_size() should return the size based on the decected
device type.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210419063326.3748-4-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit enabled Intel FPGA SmartNIC C5000X-PL virtio-block
for vDPA.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210419063326.3748-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit deduces VIRTIO device ID as device type when probe,
then ifcvf_vdpa_get_device_id() can simply return the ID.
ifcvf_vdpa_get_features() and ifcvf_vdpa_get_config_size()
can work properly based on the device ID.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20210419063326.3748-2-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This new callback is used to get the size of the configuration space
of vDPA devices.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-9-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This commit deduces the VIRTIO device ID of a probed
device from its pdev device ids.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20210317094933.16417-8-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
vDPA requres VIRTIO_F_ACCESS_PLATFORM as a must, this commit
examines this when set features.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210317094933.16417-7-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit would read and store device feature
bits when probe.
rename ifcvf_get_features() to ifcvf_get_hw_features(),
it reads and stores features of the probed device.
new ifcvf_get_features() simply returns stored
feature bits.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210317094933.16417-6-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit removes the version number string, using kernel
version is enough.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210317094933.16417-5-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IFCVF driver probes multiple types of devices now,
to distinguish the original device driven by IFCVF
from others, it is renamed as "N3000".
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210317094933.16417-4-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit enabled Intel FPGA SmartNIC C5000X-PL virtio-net
for vDPA
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210317094933.16417-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In this commit, ifcvf_get_vendor_id() will return
a device specific vendor id of the probed pci device
than a hard code.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210317094933.16417-2-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch delay the queue number setting to vDPA device
registering. This allows us to probe the virtqueue numbers between
device allocation and registering.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210223061905.422659-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In a subsequent patch, when user initiated command creates a vdpa device,
the user chooses the name of the vdpa device.
To support it, extend the device allocation API to consider this name
specified by the caller driver.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-3-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.
While at it, fix a typo (s/confiugration/configuration)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201129125434.1462638-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
We don't free config irq in ifcvf_free_irq() which will trigger a
BUG() in pci core since we try to free the vectors that has an
action. Fixing this by recording the config irq in ifcvf_hw structure
and free it in ifcvf_free_irq().
Fixes: e7991f376a ("ifcvf: implement config interrupt in IFCVF")
Cc: Zhu Lingshan <lingshan.zhu@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200723091254.20617-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhu Lingshan <lingshan.zhu@intel.com>
Fixes: e7991f376a ("ifcvf: implement config interrupt in IFCVF")
Cc: Zhu Lingshan <a class="moz-txt-link-rfc2396E" href="mailto:lingshan.zhu@intel.com"><lingshan.zhu@intel.com></a>
Signed-off-by: Jason Wang <a class="moz-txt-link-rfc2396E" href="mailto:jasowang@redhat.com"><jasowang@redhat.com></a>
Modify get_vq_state() so it returns an error code. In case of hardware
acceleration, the available index may be retrieved from the device, an
operation that can possibly fail.
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Link: https://lore.kernel.org/r/20200804162048.22587-9-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
For now VQ state involves 16 bit available index value encoded in u64
variable. In the future it will be extended to contain more fields. Use
struct to contain the state, now containing only a single u16 for the
available index. In the future we can add fields to this struct.
Reviewed-by: Parav Pandit <parav@mellanox.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Link: https://lore.kernel.org/r/20200804162048.22587-8-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will enable vdpa providers to add support for multi queue feature
and publish it to upper layers (vhost and virtio).
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200804162048.22587-7-eli@mellanox.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit implemented vdpa_config_ops.get_vq_irq() in ifcvf,
and initialized vq irq to -EINVAL. So that ifcvf can report
irq number of a vq, or -EINVAL if the vq is not assigned an
irq number.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200731065533.4144-6-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename the bit to match latest virtio spec.
Add a compat macro to avoid breaking existing userspace.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
User space may try to set status of same value multiple times,
this patch handles this case more efficiently by ignoring the
setting of the same status value.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/1591352835-22441-3-git-send-email-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit move IRQ request and free operations from probe()
to VIRTIO status change handler to comply with VIRTIO spec.
VIRTIO spec 1.1, section 2.1.2 Device Requirements: Device Status Field
The device MUST NOT consume buffers or send any used buffer
notifications to the driver before DRIVER_OK.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/1589270444-3669-1-git-send-email-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
get_vq_align returns u16 now, but that's not enough for
systems/devices with 64K pages. All callers assign it to
a u32 variable anyway, so let's just change the return
value type to u32.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
drivers/vdpa/ifcvf/ifcvf_main.c:34:24:
warning: variable ‘ifcvf’ set but not used [-Wunused-but-set-variable]
drivers/vdpa/ifcvf/ifcvf_base.c:304:31:
warning: variable ‘ifcvf_lm’ set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200402024626.32944-1-yuehaibing@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We have both vhost and virtio drivers that depend on vdpa.
It's easier to locate it at a top level directory otherwise
we run into issues e.g. if vhost is built-in but virtio
is modular. Let's just move it up a level.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>