Граф коммитов

276 Коммитов

Автор SHA1 Сообщение Дата
Dan Carpenter 7acef60455 rxrpc: checking for IS_ERR() instead of NULL
The rxrpc_lookup_peer() function returns NULL on error, it never returns
error pointers.

Fixes: 8496af50eb ('rxrpc: Use RCU to access a peer's service connection tree')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15 14:16:25 -07:00
Wei Yongjun 8addc0440b rxrpc: Fix error handling in af_rxrpc_init()
security initialized after alloc workqueue, so we should exit security
before destroy workqueue in the error handing.

Fixes: 648af7fca1 ("rxrpc: Absorb the rxkad security module")
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12 11:07:38 -07:00
David Howells d440a1ce5d rxrpc: Kill off the call hash table
The call hash table is now no longer used as calls are looked up directly
by channel slot on the connection, so kill it off.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 11:23:54 +01:00
David Howells 8496af50eb rxrpc: Use RCU to access a peer's service connection tree
Move to using RCU access to a peer's service connection tree when routing
an incoming packet.  This is done using a seqlock to trigger retrying of
the tree walk if a change happened.

Further, we no longer get a ref on the connection looked up in the
data_ready handler unless we queue the connection's work item - and then
only if the refcount > 0.


Note that I'm avoiding the use of a hash table for service connections
because each service connection is addressed by a 62-bit number
(constructed from epoch and connection ID >> 2) that would allow the client
to engage in bucket stuffing, given knowledge of the hash algorithm.
Peers, however, are hashed as the network address is less controllable by
the client.  The total number of peers will also be limited in a future
commit.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:51:14 +01:00
David Howells 1291e9d108 rxrpc: Move data_ready peer lookup into rxrpc_find_connection()
Move the peer lookup done in input.c by data_ready into
rxrpc_find_connection().

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:51:14 +01:00
David Howells e8d70ce177 rxrpc: Prune the contents of the rxrpc_conn_proto struct
Prune the contents of the rxrpc_conn_proto struct.  Most of the fields aren't
used anymore.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:51:14 +01:00
David Howells 001c112249 rxrpc: Maintain an extra ref on a conn for the cache list
Overhaul the usage count accounting for the rxrpc_connection struct to make
it easier to implement RCU access from the data_ready handler.

The problem is that currently we're using a lock to prevent the garbage
collector from trying to clean up a connection that we're contemplating
unidling.  We could just stick incoming packets on the connection we find,
but we've then got a problem that we may race when dispatching a work item
to process it as we need to give that a ref to prevent the rxrpc_connection
struct from disappearing in the meantime.

Further, incoming packets may get discarded if attached to an
rxrpc_connection struct that is going away.  Whilst this is not a total
disaster - the client will presumably resend - it would delay processing of
the call.  This would affect the AFS client filesystem's service manager
operation.

To this end:

 (1) We now maintain an extra count on the connection usage count whilst it
     is on the connection list.  This mean it is not in use when its
     refcount is 1.

 (2) When trying to reuse an old connection, we only increment the refcount
     if it is greater than 0.  If it is 0, we replace it in the tree with a
     new candidate connection.

 (3) Two connection flags are added to indicate whether or not a connection
     is in the local's client connection tree (used by sendmsg) or the
     peer's service connection tree (used by data_ready).  This makes sure
     that we don't try and remove a connection if it got replaced.

     The flags are tested under lock with the removal operation to prevent
     the reaper from killing the rxrpc_connection struct whilst someone
     else is trying to effect a replacement.

     This could probably be alleviated by using memory barriers between the
     flag set/test and the rb_tree ops.  The rb_tree op would still need to
     be under the lock, however.

 (4) When trying to reap an old connection, we try to flip the usage count
     from 1 to 0.  If it's not 1 at that point, then it must've come back
     to life temporarily and we ignore it.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:50:04 +01:00
David Howells d991b4a32f rxrpc: Move peer lookup from call-accept to new-incoming-conn
Move the lookup of a peer from a call that's being accepted into the
function that creates a new incoming connection.  This will allow us to
avoid incrementing the peer's usage count in some cases in future.

Note that I haven't bother to integrate rxrpc_get_addr_from_skb() with
rxrpc_extract_addr_from_skb() as I'm going to delete the former in the very
near future.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:49:57 +01:00
David Howells 7877a4a4bd rxrpc: Split service connection code out into its own file
Split the service-specific connection code out into into its own file.  The
client-specific code has already been split out.  This will leave just the
common code in the original file.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:49:35 +01:00
David Howells c6d2b8d764 rxrpc: Split client connection code out into its own file
Split the client-specific connection code out into its own file.  It will
behave somewhat differently from the service-specific connection code, so
it makes sense to separate them.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:52 +01:00
David Howells a1399f8bb0 rxrpc: Call channels should have separate call number spaces
Each channel on a connection has a separate, independent number space from
which to allocate callNumber values.  It is entirely possible, for example,
to have a connection with four active calls, each with call number 1.

Note that the callNumber values for any particular channel don't have to
start at 1, but they are supposed to increment monotonically for that
channel from a client's perspective and may not be reused once the call
number is transmitted (until the epoch cycles all the way back round).

Currently, however, call numbers are allocated on a per-connection basis
and, further, are held in an rb-tree.  The rb-tree is redundant as the four
channel pointers in the rxrpc_connection struct are entirely capable of
pointing to all the calls currently in progress on a connection.

To this end, make the following changes:

 (1) Handle call number allocation independently per channel.

 (2) Get rid of the conn->calls rb-tree.  This is overkill as a connection
     may have a maximum of four calls in progress at any one time.  Use the
     pointers in the channels[] array instead, indexed by the channel
     number from the packet.

 (3) For each channel, save the result of the last call that was in
     progress on that channel in conn->channels[] so that the final ACK or
     ABORT packet can be replayed if necessary.  Any call earlier than that
     is just ignored.  If we've seen the next call number in a packet, the
     last one is most definitely defunct.

 (4) When generating a RESPONSE packet for a connection, the call number
     counter for each channel must be included in it.

 (5) When parsing a RESPONSE packet for a connection, the call number
     counters contained therein should be used to set the minimum expected
     call numbers on each channel.

To do in future commits:

 (1) Replay terminal packets based on the last call stored in
     conn->channels[].

 (2) Connections should be retired before the callNumber space on any
     channel runs out.

 (3) A server is expected to disregard or reject any new incoming call that
     has a call number less than the current call number counter.  The call
     number counter for that channel must be advanced to the new call
     number.

     Note that the server cannot just require that the next call that it
     sees on a channel be exactly the call number counter + 1 because then
     there's a scenario that could cause a problem: The client transmits a
     packet to initiate a connection, the network goes out, the server
     sends an ACK (which gets lost), the client sends an ABORT (which also
     gets lost); the network then reconnects, the client then reuses the
     call number for the next call (it doesn't know the server already saw
     the call number), but the server thinks it already has the first
     packet of this call (it doesn't know that the client doesn't know that
     it saw the call number the first time).

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:52 +01:00
David Howells 30b515f4d1 rxrpc: Access socket accept queue under right lock
The socket's accept queue (socket->acceptq) should be accessed under
socket->call_lock, not under the connection lock.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:51 +01:00
David Howells dee46364ce rxrpc: Add RCU destruction for connections and calls
Add RCU destruction for connections and calls as the RCU lookup from the
transport socket data_ready handler is going to come along shortly.

Whilst we're at it, move the cleanup workqueue flushing and RCU barrierage
into the destruction code for the objects that need it (locals and
connections) and add the extra RCU barrier required for connection cleanup.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:51 +01:00
David Howells e653cfe49c rxrpc: Release a call's connection ref on call disconnection
When a call is disconnected, clear the call's pointer to the connection and
release the associated ref on that connection.  This means that the call no
longer pins the connection and the connection can be discarded even before
the call is.

As the code currently stands, the call struct is effectively pinned by
userspace until userspace has enacted a recvmsg() to retrieve the final
call state as sk_buffs on the receive queue pin the call to which they're
related because:

 (1) The rxrpc_call struct contains the userspace ID that recvmsg() has to
     include in the control message buffer to indicate which call is being
     referred to.  This ID must remain valid until the terminal packet is
     completely read and must be invalidated immediately at that point as
     userspace is entitled to immediately reuse it.

 (2) The final ACK to the reply to a client call isn't sent until the last
     data packet is entirely read (it's probably worth altering this in
     future to be send the ACK as soon as all the data has been received).


This change requires a bit of rearrangement to make sure that the call
isn't going to try and access the connection again after protocol
completion:

 (1) Delete the error link earlier when we're releasing the call.  Possibly
     network errors should be distributed via connections at the cost of
     adding in an access to the rxrpc_connection struct.

 (2) Remove the call from the connection's call tree before disconnecting
     the call.  The call tree needs to be removed anyway and incoming
     packets delivered by channel pointer instead.

 (3) The release call event should be considered last after all other
     events have been processed so that we don't need access to the
     connection again.

 (4) Move the channel_lock taking from rxrpc_release_call() to
     rxrpc_disconnect_call() where it will be required in future.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:51 +01:00
David Howells d1e858c5a3 rxrpc: Fix handling of connection failure in client call creation
If rxrpc_connect_call() fails during the creation of a client connection,
there are two bugs that we can hit that need fixing:

 (1) The call state should be moved to RXRPC_CALL_DEAD before the call
     cleanup phase is invoked.  If not, this can cause an assertion failure
     later.

 (2) call->link should be reinitialised after being deleted in
     rxrpc_new_client_call() - which otherwise leads to a failure later
     when the call cleanup attempts to delete the link again.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:51 +01:00
David Howells 2c4579e4b1 rxrpc: Move usage count getting into rxrpc_queue_conn()
Rather than calling rxrpc_get_connection() manually before calling
rxrpc_queue_conn(), do it inside the queue wrapper.

This allows us to do some important fixes:

 (1) If the usage count is 0, do nothing.  This prevents connections from
     being reanimated once they're dead.

 (2) If rxrpc_queue_work() fails because the work item is already queued,
     retract the usage count increment which would otherwise be lost.

 (3) Don't take a ref on the connection in the work function.  By passing
     the ref through the work item, this is unnecessary.  Doing it in the
     work function is too late anyway.  Previously, connection-directed
     packets held a ref on the connection, but that's not really the best
     idea.

And another useful changes:

 (*) Don't need to take a refcount on the connection in the data_ready
     handler unless we invoke the connection's work item.  We're using RCU
     there so that's otherwise redundant.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:51 +01:00
David Howells eb9b9d2275 rxrpc: Check that the client conns cache is empty before module removal
Check that the client conns cache is empty before module removal and bug if
not, listing any offending connections that are still present.  Unfortunately,
if there are connections still around, then the transport socket is still
unexpectedly open and active, so we can't just unallocate the connections.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:51 +01:00
David Howells bba304db34 rxrpc: Turn connection #defines into enums and put outside struct def
Turn the connection event and state #define lists into enums and move
outside of the struct definition.

Whilst we're at it, change _SERVER to _SERVICE in those identifiers and add
EV_ into the event name to distinguish them from flags and states.

Also add a symbol indicating the number of states and use that in the state
text array.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:51 +01:00
David Howells 5acbee4648 rxrpc: Provide queuing helper functions
Provide queueing helper functions so that the queueing of local and
connection objects can be fixed later.

The issue is that a ref on the object needs to be passed to the work queue,
but the act of queueing the object may fail because the object is already
queued.  Testing the queuedness of an object before hand doesn't work
because there can be a race with someone else trying to queue it.  What
will have to be done is to adjust the refcount depending on the result of
the queue operation.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:05 +01:00
Herbert Xu a263629da5 rxrpc: Avoid using stack memory in SG lists in rxkad
rxkad uses stack memory in SG lists which would not work if stacks were
allocated from vmalloc memory.  In fact, in most cases this isn't even
necessary as the stack memory ends up getting copied over to kmalloc
memory.

This patch eliminates all the unnecessary stack memory uses by supplying
the final destination directly to the crypto API.  In two instances where a
temporary buffer is actually needed we also switch use a scratch area in
the rxrpc_call struct (only one DATA packet will be being secured or
verified at a time).

Finally there is no need to split a split-page buffer into two SG entries
so code dealing with that has been removed.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:05 +01:00
David Howells 689f4c646d rxrpc: Check the source of a packet to a client conn
When looking up a client connection to which to route a packet, we need to
check that the packet came from the correct source so that a peer can't try
to muck around with another peer's connection.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:05 +01:00
David Howells 88b99d0b7a rxrpc: Fix some sparse errors
Fix the following sparse errors:

../net/rxrpc/conn_object.c:77:17: warning: incorrect type in assignment (different base types)
../net/rxrpc/conn_object.c:77:17:    expected restricted __be32 [usertype] call_id
../net/rxrpc/conn_object.c:77:17:    got unsigned int [unsigned] [usertype] call_id
../net/rxrpc/conn_object.c:84:21: warning: restricted __be32 degrades to integer
../net/rxrpc/conn_object.c:86:26: warning: restricted __be32 degrades to integer
../net/rxrpc/conn_object.c:357:15: warning: incorrect type in assignment (different base types)
../net/rxrpc/conn_object.c:357:15:    expected restricted __be32 [usertype] epoch
../net/rxrpc/conn_object.c:357:15:    got unsigned int [unsigned] [usertype] epoch
../net/rxrpc/conn_object.c:369:21: warning: restricted __be32 degrades to integer
../net/rxrpc/conn_object.c:371:26: warning: restricted __be32 degrades to integer
../net/rxrpc/conn_object.c:411:21: warning: restricted __be32 degrades to integer
../net/rxrpc/conn_object.c:413:26: warning: restricted __be32 degrades to integer

Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-06 10:43:05 +01:00
David Howells ac5d26836c rxrpc: Fix processing of authenticated/encrypted jumbo packets
When a jumbo packet is being split up and processed, the crypto checksum
for each split-out packet is in the jumbo header and needs placing in the
reconstructed packet header.

When the code was changed to keep the stored copy of the packet header in
host byte order, this reconstruction was missed.

Found with sparse with CF=-D__CHECK_ENDIAN__:

    ../net/rxrpc/input.c:479:33: warning: incorrect type in assignment (different base types)
    ../net/rxrpc/input.c:479:33:    expected unsigned short [unsigned] [usertype] _rsvd
    ../net/rxrpc/input.c:479:33:    got restricted __be16 [addressable] [usertype] _rsvd

Fixes: 0d12f8a402 ("rxrpc: Keep the skb private record of the Rx header in host byte order")
Signed-off-by: David Howells <dhowells@redhat.com>
2016-07-01 08:35:02 +01:00
David Howells aa390bbe21 rxrpc: Kill off the rxrpc_transport struct
The rxrpc_transport struct is now redundant, given that the rxrpc_peer
struct is now per peer port rather than per peer host, so get rid of it.

Service connection lists are transferred to the rxrpc_peer struct, as is
the conn_lock.  Previous patches moved the client connection handling out
of the rxrpc_transport struct and discarded the connection bundling code.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 14:00:23 +01:00
David Howells 999b69f892 rxrpc: Kill the client connection bundle concept
Kill off the concept of maintaining a bundle of connections to a particular
target service to increase the number of call slots available for any
beyond four for that service (there are four call slots per connection).

This will make cleaning up the connection handling code easier and
facilitate removal of the rxrpc_transport struct.  Bundling can be
reintroduced later if necessary.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:20:55 +01:00
David Howells 5627cc8b96 rxrpc: Provide more refcount helper functions
Provide refcount helper functions for connections so that the code doesn't
touch local or connection usage counts directly.

Also make it such that local and peer put functions can take a NULL
pointer.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:17:51 +01:00
David Howells 985a5c824a rxrpc: Make rxrpc_send_packet() take a connection not a transport
Make rxrpc_send_packet() take a connection not a transport as part of the
phasing out of the rxrpc_transport struct.

Whilst we're at it, rename the function to rxrpc_send_data_packet() to
differentiate it from the other packet sending functions.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:17:51 +01:00
David Howells f4e7da8cde rxrpc: Calls displayed in /proc may in future lack a connection
Allocated rxrpc calls displayed in /proc/net/rxrpc_calls may in future be
on the proc list before they're connected or after they've been
disconnected - in which case they may not have a pointer to a connection
struct that can be used to get data from there.

Deal with this by using stuff from the call struct in preference where
possible and printing "no_connection" rather than a peer address if no
connection is assigned.

This change also has the added bonus that the service ID is now taken from
the call rather the connection which will allow per-call service upgrades
to be shown - something required for AuriStor server compatibility.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:17:51 +01:00
David Howells f4552c2d24 rxrpc: Validate the net address given to rxrpc_kernel_begin_call()
Validate the net address given to rxrpc_kernel_begin_call() before using
it.

Whilst this should be mostly unnecessary for in-kernel users, it does clear
the tail of the address struct in case we want to hash or compare the whole
thing.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:17:51 +01:00
David Howells 4a3388c803 rxrpc: Use IDR to allocate client conn IDs on a machine-wide basis
Use the IDR facility to allocate client connection IDs on a machine-wide
basis so that each client connection has a unique identifier.  When the
connection ID space wraps, we advance the epoch by 1, thereby effectively
having a 62-bit ID space.  The IDR facility is then used to look up client
connections during incoming packet routing instead of using an rbtree
rooted on the transport.

This change allows for the removal of the transport in the future and also
means that client connections can be looked up directly in the data-ready
handler by connection ID.

The ID management code is placed in a new file, conn-client.c, to which all
the client connection-specific code will eventually move.

Note that the IDR tree gets very expensive on memory if the connection IDs
are widely scattered throughout the number space, so we shall need to
retire connections that have, say, an ID more than four times the maximum
number of client conns away from the current allocation point to try and
keep the IDs concentrated.  We will also need to retire connections from an
old epoch.

Also note that, for the moment, a pointer to the transport has to be passed
through into the ID allocation function so that we can take a BH lock to
prevent a locking issue against in-BH lookup of client connections.  This
will go away later when RCU is used for server connections also.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:10:02 +01:00
David Howells b3f575043f rxrpc: rxrpc_connection_lock shouldn't be a BH lock, but conn_lock is
rxrpc_connection_lock shouldn't be accessed as a BH-excluding lock.  It's
only accessed in a few places and none of those are in BH-context.

rxrpc_transport::conn_lock, however, *is* a BH-excluding lock and should be
accessed so consistently.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:10:02 +01:00
David Howells 42886ffe77 rxrpc: Pass sk_buff * rather than rxrpc_host_header * to functions
Pass a pointer to struct sk_buff rather than struct rxrpc_host_header to
functions so that they can in the future get at transport protocol parameters
rather than just RxRPC parameters.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:10:01 +01:00
David Howells cc8feb8edd rxrpc: Fix exclusive connection handling
"Exclusive connections" are meant to be used for a single client call and
then scrapped.  The idea is to limit the use of the negotiated security
context.  The current code, however, isn't doing this: it is instead
restricting the socket to a single virtual connection and doing all the
calls over that.

This is changed such that the socket no longer maintains a special virtual
connection over which it will do all the calls, but rather gets a new one
each time a new exclusive call is made.

Further, using a socket option for this is a poor choice.  It should be
done on sendmsg with a control message marker instead so that calls can be
marked exclusive individually.  To that end, add RXRPC_EXCLUSIVE_CALL
which, if passed to sendmsg() as a control message element, will cause the
call to be done on an single-use connection.

The socket option (RXRPC_EXCLUSIVE_CONNECTION) still exists and, if set,
will override any lack of RXRPC_EXCLUSIVE_CALL being specified so that
programs using the setsockopt() will appear to work the same.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:10:00 +01:00
David Howells 85f32278bd rxrpc: Replace conn->trans->{local,peer} with conn->params.{local,peer}
Replace accesses of conn->trans->{local,peer} with
conn->params.{local,peer} thus making it easier for a future commit to
remove the rxrpc_transport struct.

This also reduces the number of memory accesses involved.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:10:00 +01:00
David Howells 19ffa01c9c rxrpc: Use structs to hold connection params and protocol info
Define and use a structure to hold connection parameters.  This makes it
easier to pass multiple connection parameters around.

Define and use a structure to hold protocol information used to hash a
connection for lookup on incoming packet.  Most of these fields will be
disposed of eventually, including the duplicate local pointer.

Whilst we're at it rename "proto" to "family" when referring to a protocol
family.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:09:59 +01:00
Arnd Bergmann 2f9f9f5210 rxrpc: fix uninitialized variable use
Hashing the peer key was introduced for AF_INET, but gcc
warns about the rxrpc_peer_hash_key function returning uninitialized
data for any other value of srx->transport.family:

net/rxrpc/peer_object.c: In function 'rxrpc_peer_hash_key':
net/rxrpc/peer_object.c:57:15: error: 'p' may be used uninitialized in this function [-Werror=maybe-uninitialized]

Assuming that nothing else can be set here, this changes the
function to just return zero in case of an unknown address
family.

Fixes: be6e6707f6 ("rxrpc: Rework peer object handling to use hash table and RCU")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:09:58 +01:00
Dan Carpenter 0e4699e4a3 rxrpc: checking for IS_ERR() instead of NULL
rxrpc_lookup_peer_rcu() and rxrpc_lookup_peer() return NULL on error, never
error pointers, so IS_ERR() can't be used.

Fix three callers of those functions.

Fixes: be6e6707f6 ('rxrpc: Rework peer object handling to use hash table and RCU')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-22 09:09:58 +01:00
David Howells 4f95dd78a7 rxrpc: Rework local endpoint management
Rework the local RxRPC endpoint management.

Local endpoint objects are maintained in a flat list as before.  This
should be okay as there shouldn't be more than one per open AF_RXRPC socket
(there can be fewer as local endpoints can be shared if their local service
ID is 0 and they share the same local transport parameters).

Changes:

 (1) Local endpoints may now only be shared if they have local service ID 0
     (ie. they're not being used for listening).

     This prevents a scenario where process A is listening of the Cache
     Manager port and process B contacts a fileserver - which may then
     attempt to send CM requests back to B.  But if A and B are sharing a
     local endpoint, A will get the CM requests meant for B.

 (2) We use a mutex to handle lookups and don't provide RCU-only lookups
     since we only expect to access the list when opening a socket or
     destroying an endpoint.

     The local endpoint object is pointed to by the transport socket's
     sk_user_data for the life of the transport socket - allowing us to
     refer to it directly from the sk_data_ready and sk_error_report
     callbacks.

 (3) atomic_inc_not_zero() now exists and can be used to only share a local
     endpoint if the last reference hasn't yet gone.

 (4) We can remove rxrpc_local_lock - a spinlock that had to be taken with
     BH processing disabled given that we assume sk_user_data won't change
     under us.

 (5) The transport socket is shut down before we clear the sk_user_data
     pointer so that we can be sure that the transport socket's callbacks
     won't be invoked once the RCU destruction is scheduled.

 (6) Local endpoints have a work item that handles both destruction and
     event processing.  The means that destruction doesn't then need to
     wait for event processing.  The event queues can then be cleared after
     the transport socket is shut down.

 (7) Local endpoints are no longer available for resurrection beyond the
     life of the sockets that had them open.  As soon as their last ref
     goes, they are scheduled for destruction and may not have their usage
     count moved from 0.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-15 15:38:17 +01:00
David Howells 875636163b rxrpc: Separate local endpoint event handling out into its own file
Separate local endpoint event handling out into its own file preparatory to
overhauling the object management aspect (which remains in the original
file).

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-15 15:37:12 +01:00
David Howells f66d749019 rxrpc: Use the peer record to distribute network errors
Use the peer record to distribute network errors rather than the transport
object (which I want to get rid of).  An error from a particular peer
terminates all calls on that peer.

For future consideration:

 (1) For ICMP-induced errors it might be worth trying to extract the RxRPC
     header from the offending packet, if one is returned attached to the
     ICMP packet, to better direct the error.

     This may be overkill, though, since an ICMP packet would be expected
     to be relating to the destination port, machine or network.  RxRPC
     ABORT and BUSY packets give notice at RxRPC level.

 (2) To also abort connection-level communications (such as CHALLENGE
     packets) where indicted by an error - but that requires some revamping
     of the connection event handling first.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-15 10:15:16 +01:00
David Howells fe77d5fc5a rxrpc: Do a little bit of tidying in the ICMP processing
Do a little bit of tidying in the ICMP processing code.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-15 10:15:09 +01:00
David Howells 1c1df86fad rxrpc: Don't assume anything about the address in an ICMP packet
Don't assume anything about the address in an ICMP packet in
rxrpc_error_report() as the address may not be IPv4 in future, especially
since we're just printing these details.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-15 10:15:08 +01:00
David Howells 1a70c05bad rxrpc: Break MTU determination from ICMP into its own function
Break MTU determination from ICMP out into its own function to reduce the
complexity of the error report handler.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-15 10:15:06 +01:00
David Howells abe89ef0ed rxrpc: Rename rxrpc_UDP_error_report() to rxrpc_error_report()
Rename rxrpc_UDP_error_report() to rxrpc_error_report() as it might get
called for something other than UDP.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-15 10:14:37 +01:00
David Howells be6e6707f6 rxrpc: Rework peer object handling to use hash table and RCU
Rework peer object handling to use a hash table instead of a flat list and
to use RCU.  Peer objects are no longer destroyed by passing them to a
workqueue to process, but rather are just passed to the RCU garbage
collector as kfree'able objects.

The hash function uses the local endpoint plus all the components of the
remote address, except for the RxRPC service ID.  Peers thus represent a
UDP port on the remote machine as contacted by a UDP port on this machine.

The RCU read lock is used to handle non-creating lookups so that they can
be called from bottom half context in the sk_error_report handler without
having to lock the hash table against modification.
rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in
the future, this will be passed to a work item for error distribution in
the error_report path and this function will cease being used in the
data_ready path.

Creating lookups are done under spinlock rather than mutex as they might be
set up due to an external stimulus if the local endpoint is a server.

Captured network error messages (ICMP) are handled with respect to this
struct and MTU size and RTT are cached here.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-15 10:12:33 +01:00
David Howells 0d81a51ab9 rxrpc: Update the comments in ar-internal.h to reflect renames
Update the section comments in ar-internal.h that indicate the locations of
the referenced items to reflect the renames done to the .c files in
net/rxrpc/.

This also involves some rearrangement to reflect keep the sections in order
of filename.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-13 13:38:51 +01:00
David Howells 8c3e34a4ff rxrpc: Rename files matching ar-*.c to git rid of the "ar-" prefix
Rename files matching net/rxrpc/ar-*.c to get rid of the "ar-" prefix.
This will aid splitting those files by making easier to come up with new
names.

Note that the not all files are simply renamed from ar-X.c to X.c.  The
following exceptions are made:

 (*) ar-call.c -> call_object.c
     ar-ack.c -> call_event.c

     call_object.c is going to contain the core of the call object
     handling.  Call event handling is all going to be in call_event.c.

 (*) ar-accept.c -> call_accept.c

     Incoming call handling is going to be here.

 (*) ar-connection.c -> conn_object.c
     ar-connevent.c -> conn_event.c

     The former file is going to have the basic connection object handling,
     but there will likely be some differentiation between client
     connections and service connections in additional files later.  The
     latter file will have all the connection-level event handling.

 (*) ar-local.c -> local_object.c

     This will have the local endpoint object handling code.  The local
     endpoint event handling code will later be split out into
     local_event.c.

 (*) ar-peer.c -> peer_object.c

     This will have the peer endpoint object handling code.  Peer event
     handling code will be placed in peer_event.c (for the moment, there is
     none).

 (*) ar-error.c -> peer_event.c

     This will become the peer event handling code, though for the moment
     it's actually driven from the local endpoint's perspective.

Note that I haven't renamed ar-transport.c to transport_object.c as the
intention is to delete it when the rxrpc_transport struct is excised.

The only file that actually has its contents changed is net/rxrpc/Makefile.

net/rxrpc/ar-internal.h will need its section marker comments updating, but
I'll do that in a separate patch to make it easier for git to follow the
history across the rename.  I may also want to rename ar-internal.h at some
point - but that would mean updating all the #includes and I'd rather do
that in a separate step.

Signed-off-by: David Howells <dhowells@redhat.com.
2016-06-13 12:16:05 +01:00
David Howells 0e119b41b7 rxrpc: Limit the listening backlog
Limit the socket incoming call backlog queue size so that a remote client
can't pump in sufficient new calls that the server runs out of memory.  Note
that this is partially theoretical at the moment since whilst the number of
calls is limited, the number of packets trying to set up new calls is not.
This will be addressed in a later patch.

If the caller of listen() specifies a backlog INT_MAX, then they get the
current maximum; anything else greater than max_backlog or anything
negative incurs EINVAL.

The limit on the maximum queue size can be set by:

	echo N >/proc/sys/net/rxrpc/max_backlog

where 4<=N<=32.

Further, set the default backlog to 0, requiring listen() to be called
before we start actually queueing new calls.  Whilst this kind of is a
change in the UAPI, the caller can't actually *accept* new calls anyway
unless they've first called listen() to put the socket into the LISTENING
state - thus the aforementioned new calls would otherwise just sit there,
eating up kernel memory.  (Note that sockets that don't have a non-zero
service ID bound don't get incoming calls anyway.)

Given that the default backlog is now 0, make the AFS filesystem call
kernel_listen() to set the maximum backlog for itself.

Possible improvements include:

 (1) Trimming a too-large backlog to max_backlog when listen is called.

 (2) Trimming the backlog value whenever the value is used so that changes
     to max_backlog are applied to an open socket automatically.  Note that
     the AFS filesystem opens one socket and keeps it open for extended
     periods, so would miss out on changes to max_backlog.

 (3) Having a separate setting for the AFS filesystem.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 18:14:47 -07:00
David Howells bc6e1ea32c rxrpc: Trim line-terminal whitespace
Trim line-terminal whitespace in net/rxrpc/

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 18:14:47 -07:00
David S. Miller 1578b0a5e9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/sched/act_police.c
	net/sched/sch_drr.c
	net/sched/sch_hfsc.c
	net/sched/sch_prio.c
	net/sched/sch_red.c
	net/sched/sch_tbf.c

In net-next the drop methods of the packet schedulers got removed, so
the bug fixes to them in 'net' are irrelevant.

A packet action unload crash fix conflicts with the addition of the
new firstuse timestamp.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 11:52:24 -07:00