Граф коммитов

7 Коммитов

Автор SHA1 Сообщение Дата
Lorenzo Pieralisi 031bd879f7 ARM: mm: implement LoUIS API for cache maintenance ops
ARM v7 architecture introduced the concept of cache levels and related
control registers. New processors like A7 and A15 embed an L2 unified cache
controller that becomes part of the cache level hierarchy. Some operations in
the kernel like cpu_suspend and __cpu_disable do not require a flush of the
entire cache hierarchy to DRAM but just the cache levels belonging to the
Level of Unification Inner Shareable (LoUIS), which in most of ARM v7 systems
correspond to L1.

The current cache flushing API used in cpu_suspend and __cpu_disable,
flush_cache_all(), ends up flushing the whole cache hierarchy since for
v7 it cleans and invalidates all cache levels up to Level of Coherency
(LoC) which cripples system performance when used in hot paths like hotplug
and cpuidle.

Therefore a new kernel cache maintenance API must be added to cope with
latest ARM system requirements.

This patch adds flush_cache_louis() to the ARM kernel cache maintenance API.

This function cleans and invalidates all data cache levels up to the
Level of Unification Inner Shareable (LoUIS) and invalidates the instruction
cache for processors that support it (> v7).

This patch also creates an alias of the cache LoUIS function to flush_kern_all
for all processor versions prior to v7, so that the current cache flushing
behaviour is unchanged for those processors.

v7 cache maintenance code implements a cache LoUIS function that cleans and
invalidates the D-cache up to LoUIS and invalidates the I-cache, according
to the new API.

Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-25 11:20:25 +01:00
Dave Martin 9bc7491341 ARM: mm: cache-fa: Use the new processor struct macros
Signed-off-by: Dave Martin <dave.martin@linaro.org>
2011-07-07 15:31:05 +01:00
Mika Westerberg c8c90860cd ARM: 6466/1: implement flush_icache_all for the rest of the CPUs
Commit 81d11955bf ("ARM: 6405/1: Handle __flush_icache_all for
CONFIG_SMP_ON_UP") added a new function to struct cpu_cache_fns:
flush_icache_all(). It also implemented this for v6 and v7 but not
for v5 and backwards. Without the function pointer in place, we
will be calling wrong cache functions.

For example with ep93xx we get following:

    Unable to handle kernel paging request at virtual address ee070f38
    pgd = c0004000
    [ee070f38] *pgd=00000000
    Internal error: Oops: 80000005 [#1] PREEMPT
    last sysfs file:
    Modules linked in:
    CPU: 0    Not tainted  (2.6.36+ #1)
    PC is at 0xee070f38
    LR is at __dma_alloc+0x11c/0x2d0
    pc : [<ee070f38>]    lr : [<c0032c8c>]    psr: 60000013
    sp : c581bde0  ip : 00000000  fp : c0472000
    r10: c0472000  r9 : 000000d0  r8 : 00020000
    r7 : 0001ffff  r6 : 00000000  r5 : c0472400  r4 : c5980000
    r3 : c03ab7e0  r2 : 00000000  r1 : c59a0000  r0 : c5980000
    Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
    Control: c000717f  Table: c0004000  DAC: 00000017
    Process swapper (pid: 1, stack limit = 0xc581a270)
    [<c0032c8c>] (__dma_alloc+0x11c/0x2d0)
    [<c0032e5c>] (dma_alloc_writecombine+0x1c/0x24)
    [<c0204148>] (ep93xx_pcm_preallocate_dma_buffer+0x44/0x60)
    [<c02041c0>] (ep93xx_pcm_new+0x5c/0x88)
    [<c01ff188>] (snd_soc_instantiate_cards+0x8a8/0xbc0)
    [<c01ff59c>] (soc_probe+0xfc/0x134)
    [<c01adafc>] (platform_drv_probe+0x18/0x1c)
    [<c01acca4>] (driver_probe_device+0xb0/0x16c)
    [<c01ac284>] (bus_for_each_drv+0x48/0x84)
    [<c01ace90>] (device_attach+0x50/0x68)
    [<c01ac0f8>] (bus_probe_device+0x24/0x44)
    [<c01aad7c>] (device_add+0x2fc/0x44c)
    [<c01adfa8>] (platform_device_add+0x104/0x15c)
    [<c0015eb8>] (simone_init+0x60/0x94)
    [<c0021410>] (do_one_initcall+0xd0/0x1a4)

__dma_alloc() calls (inlined) __dma_alloc_buffer() which ends up
calling dmac_flush_range(). Now since the entries in the
arm920_cache_fns are shifted by one, we jump into address 0xee070f38
which is actually next instruction after the arm920_cache_fns
structure.

So implement flush_icache_all() for the rest of the supported CPUs
using a generic 'invalidate I cache' instruction.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-28 13:54:28 +01:00
Russell King 702b94bff3 ARM: dma-mapping: remove dmac_clean_range and dmac_inv_range
These are now unused, and so can be removed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15 15:22:23 +00:00
Russell King a9c9147eb9 ARM: dma-mapping: provide per-cpu type map/unmap functions
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15 15:22:20 +00:00
Russell King 2c9b9c8490 ARM: add size argument to __cpuc_flush_dcache_page
... and rename the function since it no longer operates on just
pages.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-14 14:53:22 +00:00
Paulius Zaleckas 28853ac8fe ARM: Add support for FA526 v2
Adds support for Faraday FA526 core. This core is used at least by:
Cortina Systems Gemini and Centroid family
Cavium Networks ECONA family
Grain Media GM8120
Pixelplus ImageARM
Prolific PL-1029
Faraday IP evaluation boards

v2:
- move TLB_BTB to separate patch
- update copyrights

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-03-25 13:10:01 +02:00