Change uid and gid in struct nfsd4_cb_sec to be of type kuid_t and
kgid_t.
In nfsd4_decode_cb_sec when reading uids and gids off the wire convert
them to kuids and kgids, and if they don't convert to valid kuids or
valid kuids ignore RPC_AUTH_UNIX and don't fill in any of the fields.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Write the client's ip address to any state file and all appropriate
state for that client will be forgotten.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I also log basic information that I can figure out about the type of
state (such as number of locks for each client IP address). This can be
useful for checking that state was actually dropped and later for
checking if the client was able to recover.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The eventual goal is to forget state based on ip address, so it makes
sense to call this function in a for-each-client loop until the correct
amount of state is forgotten. I also use this patch as an opportunity
to rename the forget function from "func()" to "forget()".
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There were only a small number of functions in this file and since they
all affect stored state I think it makes sense to put them in state.h
instead. I also dropped most static inline declarations since there are
no callers when fault injection is not enabled.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Passing net context looks as overkill.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch replaces init_net by SVC_NET(), where possible and also passes
proper context to nested functions where required.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.
Note: this hash is used only by legacy tracker. So let's allocate hash in
tracker init.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove the cl_recdir field from the nfs4_client struct. Instead, just
compute it on the fly when and if it's needed, which is now only when
the legacy client tracking code is in effect.
The error handling in the legacy client tracker is also changed to
handle the case where md5 is unavailable. In that case, we'll warn
the admin with a KERN_ERR message and disable the client tracking.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code requires that we md5 hash the name in order to store
the client in the confirmed and unconfirmed trees. Change it instead
to store the clients in a pair of rbtrees, and simply compare the
cl_names directly instead of hashing them. This also necessitates that
we add a new flag to the clp->cl_flags field to indicate which tree
the client is currently in.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When nfsd starts, the legacy reboot recovery code creates a tracking
struct for each directory in the v4recoverydir. When the grace period
ends, it basically does a "readdir" on the directory again, and matches
each dentry in there to an existing client id to see if it should be
removed or not. If the matching client doesn't exist, or hasn't
reclaimed its state then it will remove that dentry.
This is pretty inefficient since it involves doing a lot of hash-bucket
searching. It also means that we have to keep relying on being able to
search for a nfs4_client by md5 hashed cl_recdir name.
Instead, add a pointer to the nfs4_client that indicates the association
between the nfs4_client_reclaim and nfs4_client. When a reclaim operation
comes in, we set the pointer to make that association. On gracedone, the
legacy client tracker will keep the recdir around iff:
1/ there is a reclaim record for the directory
...and...
2/ there's an association between the reclaim record and a client record
-- that is, a create or check operation was performed on the client that
matches that directory.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Later callers will need to make changes to the record.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We'll need to be able to call this from nfs4recover.c eventually.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, it takes a client pointer, but later we're going to need to
search for these records without knowing whether a matching client even
exists.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For now this only adds support for AUTH_NULL. (Previously we assumed
AUTH_UNIX.) We'll also need AUTH_GSS, which is trickier.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're currently ignoring the callback security parameters specified in
create_session, and just assuming the client wants auth_sys, because
that's all the current linux client happens to care about. But this
could cause us callbacks to fail to a client that wanted something
different.
For now, all we're doing is no longer ignoring the uid and gid passed in
the auth_sys case. Further patches will add support for auth_null and
gss (and possibly use more of the auth_sys information; the spec wants
us to use exactly the credential we're passed, though it's hard to
imagine why a client would care).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Something like creating a client with setclientid and then trying to
confirm it with create_session may not crash the server, but I'm not
completely positive of that, and in any case it's obviously bad client
behavior.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
locks.c doesn't use the BKL anymore and there is no fi_perfile field.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit d5497fc693 "nfsd4: move rq_flavor
into svc_cred" forgot to remove cl_flavor from the client, leaving two
places (cl_flavor and cl_cred.cr_flavor) for the flavor to be stored.
After that patch, the latter was the one that was updated, but the
former was the one that the callback used.
Symptoms were a long delay on utime(). This is because the utime()
generated a setattr which recalled a delegation, but the cb_recall was
ignored by the client because it had the wrong security flavor.
Cc: stable@vger.kernel.org
Tested-by: Jamie Heilman <jamie@audible.transient.net>
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSd's boot_time represents grace period start point in time.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Passed network namespace replaced hard-coded init_net
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to RFC 5661, the TEST_STATEID operation is not allowed to
return NFS4ERR_STALE_STATEID. In addition, RFC 5661 says:
15.1.16.5. NFS4ERR_STALE_STATEID (Error Code 10023)
A stateid generated by an earlier server instance was used. This
error is moot in NFSv4.1 because all operations that take a stateid
MUST be preceded by the SEQUENCE operation, and the earlier server
instance is detected by the session infrastructure that supports
SEQUENCE.
I triggered NFS4ERR_STALE_STATEID while testing the Linux client's
NOGRACE recovery. Bruce suggested an additional test that could be
useful to client developers.
Lastly, RFC 5661, section 18.48.3 has this:
o Special stateids are always considered invalid (they result in the
error code NFS4ERR_BAD_STATEID).
An explicit check is made for those state IDs to avoid printk noise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Instead of keeping the principal name associated with a request in a
structure that's private to auth_gss and using an accessor function,
move it to svc_cred.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Abstract out the mechanism that we use to track clients into a set of
client name tracking functions.
This gives us a mechanism to plug in a new set of client tracking
functions without disturbing the callers. It also gives us a way to
decide on what tracking scheme to use at runtime.
For now, this just looks like pointless abstraction, but later we'll
add a new alternate scheme for tracking clients on stable storage.
Note too that this patch anticipates the eventual containerization
of this code by passing in struct net pointers in places. No attempt
is made to containerize the legacy client tracker however.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We'll need a way to flag the nfs4_client as already being recorded on
stable storage so that we don't continually upcall. Currently, that's
recorded in the cl_firststate field of the client struct. Using an
entire u32 to store a flag is rather wasteful though.
The cl_cb_flags field is only using 2 bits right now, so repurpose that
to a generic flags field. Rename NFSD4_CLIENT_KILL to
NFSD4_CLIENT_CB_KILL to make it evident that it's part of the callback
flags. Add a mask that we can use for existing checks that look to see
whether any flags are set, so that the new flags don't interfere.
Convert all references to cl_firstate to the NFSD4_CLIENT_STABLE flag,
and add a new NFSD4_CLIENT_RECLAIM_COMPLETE flag.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The session client is manipulated under the client_lock hence
both free_session and nfsd4_del_conns must be called under this lock.
This patch adds a BUG_ON that checks this condition in the
respective functions and implements the missing locks.
nfsd4_{get,put}_session helpers were moved to the C file that uses them
so to prevent use from external files and an unlocked version of
nfsd4_put_session is provided for external use from nfs4xdr.c
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This fixes an oops when a buggy client tries to use an initial seqid of
0 on a new slot, which we may misinterpret as a replay.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Combine two booleans into a single flag field, move the smaller fields
to the end.
(In practice this doesn't make the struct any smaller. But we'll be
adding another flag here soon.)
Remove some debugging code that doesn't look useful, while we're in the
neighborhood.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Address the possible performance regression mentioned in "nfsd4: hash
lockowners to simplify RELEASE_LOCKOWNER" by providing a separate
(lockowner, inode) hash.
Really, I doubt this matters much, but I think it's likely we'll change
these data structures here and I'd rather that the need for (owner,
inode) lookups be well-documented.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move idr preallocation out of stateid initialization, into stateid
allocation, so that we no longer have to handle any errors from the
former.
This is a little subtle due to the way the idr code manages these
preallocated items--document that in comments.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If process_open1() creates a new open owner, but the open later fails,
the current code will leave the open owner around. It won't be on the
close_lru list, and the client isn't expected to send a CLOSE, so it
will hang around as long as the client does.
Similarly, if process_open1() removes an existing open owner from the
close lru, anticipating that an open owner that previously had no
associated stateid's now will, but the open subsequently fails, then
we'll again be left with the same leak.
Fix both problems.
Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In response to some review comments, get rid of the somewhat obscure
for-loop with bitops, and improve a comment.
Reported-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use a separate stateid idr per client, and lookup a stateid by first
finding the client, then looking up the stateid relative to that client.
Also some minor refactoring.
This allows us to improve error returns: we can return expired when the
clientid is not found and bad_stateid when the clientid is found but not
the stateid, as opposed to returning expired for both cases.
I hope this will also help to replace the state lock mostly by a
per-client lock, but that hasn't been done yet.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Test_stateid is 4.1-only and only allowed after a sequence operation, so
this check is unnecessary.
Cc: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The idr system is designed exactly for generating id and looking up
integer id's. Thanks to Trond for pointing it out.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Look up closed stateid's in the stateid hash like any other stateid
rather than searching the close lru.
This is simpler, and fixes a bug: currently we handle only the case of a
close that is the last close for a given stateowner, but not the case of
a close for a stateowner that still has active opens on other files.
Thus in a case like:
open(owner, file1)
open(owner, file2)
close(owner, file2)
close(owner, file2)
the final close won't be recognized as a retransmission.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Including the full clientid in the on-the-wire stateid allows more
reliable detection of bad vs. expired stateid's, simplifies code, and
ensures we won't reuse the opaque part of the stateid (as we currently
do when the same openowner closes and reopens the same file).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Keep around an unhashed copy of the final stateid after the last close
using an openowner, and when identifying a replay, match against that
stateid instead of just against the open owner id. Free it the next
time the seqid is bumped or the stateowner is destroyed.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Eric W. Biederman
Bryan Schumaker
Stanislav Kinsbursky
Jeff Layton
J. Bruce Fields
Chuck Lever
Benny Halevy
Benny Halevy