The Anbernic and Odroid Go have different panels and take differently
named supplies, so move all the supplies to DTS defining actual panel to
fix warnings like:
rk3326-odroid-go3.dtb: panel@0: 'IOVCC-supply' is a required property
rk3326-odroid-go3.dtb: panel@0: 'iovcc-supply', 'vdd-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Update the blue LED to be controlled via pwm to enable control of LED
brightness. Add red LED as a GPIO controlled LED. The documentation
stated "label" was depreciated so function and color was used instead.
The LED names (led-2 and led-3) are given because that is what they
are numbered on the board itself; LED 1 is wired directly into an
always on regulator and is not controllable. LED 2 is labelled "alive"
on the board and documentation recommends we set the function as
status over other miscellaneous functions. LED 3 is labelled "chg" on
the board.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221201203655.1245-5-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Odroid Go Advance devicetree tries to set the rate for the cpll
clock to 17MHz, which is not a supported rate. This fails, and triggers
the error of "clk: couldn't set cpll clk rate to 17000000 (-22),
current rate: 17000000" in the dmesg log. Remove the incorrect rate.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221201203655.1245-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change the audio card name for the Odroid Go Advance series to
rk817_int. This matches the audio card name of the Anbernic RG353V.
This is done to provide a consistent card name so that a single ALSA
UCM file can be used for all (identical) implementations of this codec
and configuration combo. The rk817_int configuration is for when the
internal speaker amplifier of the rk817 is used. The other Anbernic
devices have the name as rk817_ext for when an external speaker
amplifier is used.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221201203655.1245-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
To support more devices that are clones of this device or minor
revisions without duplication move most of go2's dts into a dtsi file.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Link: https://lore.kernel.org/r/20221117215954.4114202-2-maccraft123mc@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Krzysztof Kozlowski
Chris Morgan
Maya Matuszczyk