Граф коммитов

392 Коммитов

Автор SHA1 Сообщение Дата
Stephan Gerhold 721a2a7edc iio: magnetometer: st_magn: Add LSM303C
The magnetometer part of ST LSM303C is similar (perhaps even identical)
to the already supported standalone LIS3MDL magnetometer, so just
add the new st,lsm303c-magn compatible for the existing definitions.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-4-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08 13:01:02 +00:00
Gerald Loacker 866a138917 iio: magnetometer: add ti tmag5273 driver
Add support for TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor.
Additionally to temperature and magnetic X, Y and Z-axes the angle and
magnitude are reported.
The sensor is operating in continuous measurement mode and changes to sleep
mode if not used for 5 seconds.

Datasheet: https://www.ti.com/lit/gpn/tmag5273
Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221201072220.402585-4-gerald.loacker@wolfvision.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28 17:19:44 +00:00
Uwe Kleine-König fcd9696752 iio: magnetometer: yamaha-yas530: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-160-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23 20:20:30 +00:00
Uwe Kleine-König e7a45a7635 iio: magnetometer: mmc35240: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-159-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23 20:20:30 +00:00
Uwe Kleine-König cee51403c6 iio: magnetometer: mag3110: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-158-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23 20:20:30 +00:00
Uwe Kleine-König bcf73c37f7 iio: magnetometer: hmc5843: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-157-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23 20:20:30 +00:00
Uwe Kleine-König f23215c1e5 iio: magnetometer: bmc150_magn_i2c: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-156-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23 20:20:30 +00:00
Uwe Kleine-König f64eecea19 iio: magnetometer: ak8975: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-155-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23 20:20:29 +00:00
Uwe Kleine-König 149a5043b6 iio: magnetometer: ak8974: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-154-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23 20:20:29 +00:00
Uwe Kleine-König 9492c00d83 iio: accel: st_magn: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-23-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23 19:44:03 +00:00
Linus Torvalds a09476668e Char/Misc and other driver changes for 6.1-rc1
Here is the large set of char/misc and other small driver subsystem
 changes for 6.1-rc1.  Loads of different things in here:
   - IIO driver updates, additions, and changes.  Probably the largest
     part of the diffstat
   - habanalabs driver update with support for new hardware and features,
     the second largest part of the diff.
   - fpga subsystem driver updates and additions
   - mhi subsystem updates
   - Coresight driver updates
   - gnss subsystem updates
   - extcon driver updates
   - icc subsystem updates
   - fsi subsystem updates
   - nvmem subsystem and driver updates
   - misc driver updates
   - speakup driver additions for new features
   - lots of tiny driver updates and cleanups
 
 All of these have been in the linux-next tree for a while with no
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
 5G/JQ+rpcclr7VOXlS66
 =zVkU
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
 "Here is the large set of char/misc and other small driver subsystem
  changes for 6.1-rc1. Loads of different things in here:

   - IIO driver updates, additions, and changes. Probably the largest
     part of the diffstat

   - habanalabs driver update with support for new hardware and
     features, the second largest part of the diff.

   - fpga subsystem driver updates and additions

   - mhi subsystem updates

   - Coresight driver updates

   - gnss subsystem updates

   - extcon driver updates

   - icc subsystem updates

   - fsi subsystem updates

   - nvmem subsystem and driver updates

   - misc driver updates

   - speakup driver additions for new features

   - lots of tiny driver updates and cleanups

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
  w1: Split memcpy() of struct cn_msg flexible array
  spmi: pmic-arb: increase SPMI transaction timeout delay
  spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
  spmi: pmic-arb: correct duplicate APID to PPID mapping logic
  spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
  spmi: pmic-arb: check apid against limits before calling irq handler
  spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
  spmi: pmic-arb: handle spurious interrupt
  spmi: pmic-arb: add a print in cleanup_irq
  drivers: spmi: Directly use ida_alloc()/free()
  MAINTAINERS: add TI ECAP driver info
  counter: ti-ecap-capture: capture driver support for ECAP
  Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
  dt-bindings: counter: add ti,am62-ecap-capture.yaml
  counter: Introduce the COUNTER_COMP_ARRAY component type
  counter: Consolidate Counter extension sysfs attribute creation
  counter: Introduce the Count capture component
  counter: 104-quad-8: Add Signal polarity component
  counter: Introduce the Signal polarity component
  counter: interrupt-cnt: Implement watch_validate callback
  ...
2022-10-08 08:56:37 -07:00
Andy Shevchenko d05d737791 iio: magnetometer: yamaha-yas530: Use dev_err_probe()
Unify error message format by using dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220831141530.80572-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-04 16:31:03 +01:00
Andy Shevchenko ff1c17e9a7 iio: magnetometer: yamaha-yas530: Make strings const in chip info
For better compiler coverage mark strings consts in the chip info.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220831141530.80572-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-04 16:31:03 +01:00
Andy Shevchenko 741d1e3783 iio: magnetometer: yamaha-yas530: Use pointers as driver data
Unify ID tables to use pointers for driver data. It will allow
to simplify the driver later on.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220831141530.80572-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-04 16:31:03 +01:00
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00
Jakob Hauser 65f79b5010 iio: magnetometer: yas530: Add YAS537 variant
Add support for the magnetometer Yamaha YAS537. The additions are based on
comparison of Yamaha Android kernel drivers for YAS532 [1] and YAS537 [2].

In the Yamaha YAS537 Android driver, there is an overflow/underflow control
implemented. For regular usage, this seems not necessary. A similar overflow/
underflow control of Yamaha YAS530/532 Android driver isn't integrated in the
mainline driver. It is therefore skipped for YAS537 in the mainline too.

Also in the Yamaha YAS537 Android driver, at the end of the reset_yas537()
function, a measurement is saved in "last_after_rcoil". Later on, this is
compared to current measurements. If the difference gets too big, a new
reset is initialized. The difference in measurements needs to be quite big,
it's hard to say if this is necessary for regular operation. Therefore this
isn't integrated in the mainline driver either.

[1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c
[2] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas537.c

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/264c6488733a5c32089c9ab406a5bcb808c48fef.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:04 +01:00
Jakob Hauser 059ff0f9a1 iio: magnetometer: yas530: Add function pointers to "chip_info"
Add function pointers to the "chip_info" structure to ease the handling of
different YAS variants.

In the function yas5xx_probe(), the function call for "measure_offsets" was
added as a conditional "if (ci->measure_offsets)". This is a preparatory step
for YAS537, as this variant doesn't need an offset measurement.

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/4bd3f96262e0132b7f9720521a801da3c18abd95.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:04 +01:00
Jakob Hauser 2d6676ecbe iio: magnetometer: yas530: Add temperature calculation to "chip_info"
Add temperature calculation to the "chip_info" structure to ease the handling
of different YAS variants.

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/1a8bffdb7e807455620a73f2d61981e7f9aab8d5.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:04 +01:00
Jakob Hauser 913fd40966 iio: magnetometer: yas530: Add IIO scaling to "chip_info"
Add IIO scaling to the "chip_info" structure to ease the handling to
different YAS variants.

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/a12f892633bbee13a8856c231dc793ebbc5d3a03.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:03 +01:00
Jakob Hauser dd9bd44f87 iio: magnetometer: yas530: Add volatile registers to "chip_info"
Add volatile registers to the "chip_info" structure to ease the handling of
different YAS variants.

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/aeba3877933ba9d2c920b459a9037d9186c15a4f.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:03 +01:00
Jakob Hauser a70f60e5b6 iio: magnetometer: yas530: Introduce "chip_info" structure
Introduce the "chip_info" structure approach for better variant handling.

The variant to be used is now chosen by the Device Tree (enum "chip_ids"),
not by the chip ID in the register. However, there is a check to make sure
they match (using integer "id_check").

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/57236545107286771d351b95091bf56815d3717d.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:03 +01:00
Jakob Hauser 92d9c05ca7 iio: magnetometer: yas530: Apply documentation and style fixes
This commit gathers several minor changes.

In the device examples, "Xiaomi" is too generic, specific devices should be
listed here. E.g. Xiaomi Redmi 2 seems to have YAS537 but it's not fully clear
if this applies to all its variants. Samsung Galaxy S7 is often quoted in
conjunction with YAS537.

Removed defines for device IDs of YAS537 and YAS539, they are not needed so far.

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/300e394a76eb30fa031ecb69b594e9f9a70dac42.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:03 +01:00
Jakob Hauser bdef8dcfbb iio: magnetometer: yas530: Move printk %*ph parameters out from stack
Use less stack by modifying %*ph parameters.

While at it, in the function yas530_get_calibration_data(), the debug dump was
extended to 16 elements as this is the size of the calibration data array of
YAS530.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/93b50c20adb1b2acb4cddb1ab25755070edd7c07.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:03 +01:00
Jakob Hauser 6e3bfa97c5 iio: magnetometer: yas530: Rename functions and registers
This is a preparation for adding the YAS537 variant.

Functions that are used only by YAS530, YAS532 and YAS533 are renamed from
yas5xx to yas530. Same for the registers.

To avoid part listing in function and registers names, the name of the first
variant is used. Where appropriate, comments were added that these functions
are used by more than one variant.

Functions that will be used by all variants including YAS537 remain in the
naming scheme yas5xx. Or YAS5XX for registers, respectively.

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/344d3b2f5e050eab79ce9962c24781486774d9fb.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:03 +01:00
Jakob Hauser 0ca09faade iio: magnetometer: yas530: Change data type of calibration coefficients
This is a preparation for adding YAS537 variant.

YAS537 uses other data types on the calibration coefficients [1] than YAS530 [2]
and YAS532 [3].

On YAS537, at least for a4 and a7 this could matter because 8-bit unsigned data
from the register gets stored into a signed data type, therefore this should be
8-bit as well.

For YAS530/532, on the other hand, it doesn't seem to matter. The size of a2-a9
and k is smaller than 8-bit at extraction, also the applied math is low. And
Cx/Cy1/Cy2, now being defined as signed 16-bit, are extracted as unsigned 8-bit
and undergo only minor math.

[1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas537.c#L76-L78
[2] https://github.com/NovaFusion/android_kernel_samsung_golden/blob/cm-12.1/drivers/sensor/compass/yas_mag_driver-yas530.c#L526-L527
[3] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c#L76-L77

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/f1e53bd6672aebe59f9b236b41374482edf888f8.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:03 +01:00
Jakob Hauser 8239f904f9 iio: magnetometer: yas530: Correct temperature handling
The raw temperature value is a number of counts from a certain starting
point. The resolution of the temperature counts is different for the YAS
variants.

Temperature compensation for YAS532 version AC seems to be handled differently.
It uses the deviation from 20 degree Celsius [1] whereas YAS530 and older
versions of YAS532 apply solely the t value as a multiplier [2][3].

In funtion yas5xx_read_raw(), add case IIO_CHAN_INFO_PROCESSED. Remove scale
of temperature as this isn't applied.

Additionally correct sign of temperature channel in iio_chan_spec. It's already
defined that way in the yas5xx_get_measure() function.

[1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c#L442
[2] https://github.com/NovaFusion/android_kernel_samsung_golden/blob/cm-12.1/drivers/sensor/compass/yas_mag_driver-yas530.c#L881-L883
[3] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-18.1/drivers/sensors/geomagnetic/yas_mag_driver-yas53x.c#L856-L858

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/eb45f328c7a81eb622c6a8cfc5c468ea58bbdace.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:03 +01:00
Jakob Hauser 413cf69163 iio: magnetometer: yas530: Correct scaling of magnetic axes
Looks like YAS530 raw values return picotesla and YAS532 nanotesla. Adapt
comments and scaling.

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/053ab05cb9a0f6b0536ab5e0de57009f513c6f81.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:03 +01:00
Jakob Hauser 4efdfbc16c iio: magnetometer: yas530: Change range of data in volatile register
In function yas5xx_volatile_reg(), register "YAS5XX_MEASURE_DATA + 8" shouldn't
be volatile as we count from 0 to 7 here.

Instead of lowering the number from 8 to 7, the operator "<=" is replaced by
"<". The size of the measure data array is 8, therefore it's more natural to
use 8 as a constant.

This change is of low importance as the "+ 8" register isn't called.

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/dabba10feb80171350525ac874f944076c46e084.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:03 +01:00
Jakob Hauser e137fafc89 iio: magnetometer: yas530: Change data type of hard_offsets to signed
The "hard_offsets" are currently unsigned u8 but they should be signed as they
can get negative. They are signed in function yas5xx_meaure_offsets() and in the
Yamaha drivers [1][2].

[1] https://github.com/NovaFusion/android_kernel_samsung_golden/blob/cm-12.1/drivers/sensor/compass/yas.h#L156
[2] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c#L91

Fixes: de8860b1ed ("iio: magnetometer: Add driver for Yamaha YAS530")
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/40f052bf6491457d0c5c0ed4c3534dc6fa251c3c.1660337264.git.jahau@rocketmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15 22:30:03 +01:00
Jonathan Cameron 71041f73dc iio: magn: hmc5843: Move struct dev_pm_ops out of header
Having this structure defined static in the header lead to
unnecessary duplication and required additional symbol exports.
Use the EXPORT_NS_SIMPLE_DEV_PM_OPS() to clean this up in the same
fashion as many other drivers do this.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220807184534.1037363-3-jic23@kernel.org
2022-08-15 22:30:02 +01:00
Jonathan Cameron c3b4afb182 iio: magn: hmc5843: Drop excessive indentation of assignments of hmc5843_driver
This formatting is odd, so fix it to be more standard.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220807184534.1037363-2-jic23@kernel.org
2022-08-15 22:30:02 +01:00
Jiang Jian a63d28819f iio: magnetometer: hmc5843: Remove duplicate 'the'
Fix an obvious typing error, found by spellcheck(1).

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220622035925.5008-1-jiangjian@cdjrlc.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-18 18:53:54 +01:00
Jonathan Cameron e5933cf487 iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
Using these new macros allows the compiler to remove the unused dev_pm_ops
structure and related functions if !CONFIG_PM without the need to mark
the functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-37-jic23@kernel.org
2022-07-18 18:48:19 +01:00
Jonathan Cameron 74f4595ab7 iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
Using these new macros allows the compiler to remove the unused dev_pm_ops
structure and related functions if !CONFIG_PM without the need to mark
the functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-36-jic23@kernel.org
2022-07-18 18:48:19 +01:00
Marcus Folkesson 98a30ae0b3 iio: magnetometer: rm3100: do not explicity set INDIO_BUFFER_TRIGGERED mode
The core sets INDIO_BUFFER_TRIGGERED as part of
devm_iio_triggered_buffer_setup().

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20220702085005.31666-1-marcus.folkesson@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-16 17:57:22 +01:00
Greg Kroah-Hartman 2a3c8f8a44 IIO new device support, features and minor fixes for 5.20
Several on-running cleanup efforts dominate this time, plus the DMA
 safety alignment issue identified due to improved understanding of
 the restrictions as a result of Catalin Marinas' efforts in that area.
 
 One immutable branch in here due to MFD and SPMI elements needed for
 the qcom-rradc driver.
 
 Device support
 * bmi088
   - Add support for bmi085 (accelerometer part of IMU)
   - Add support for bmi090l (accelerometer part of IMU)
 * mcp4922
   - Add support for single channel device MCP4921
 * rzg2l-adc
   - Add compatible and minor tweaks to support RZ/G2UL ADC
 * sca3300
   - Add support for scl3300 including refactoring driver to support
     multiple device types and cleanup noticed whilst working on driver.
 * spmi-rradc
   - New driver for Qualcomm SPMI Round Robin ADC including necessary
     additional utility functions in SPMI core and related MFD driver.
 * ti-dac55781
   - Add compatible for DAC121C081 which is very similar to existing parts.
 
 Features
 * core
   - Warn on iio_trigger_get() on an unregistered IIO trigger.
 * bma400
   - Triggered buffer support
   - Activity and step counting
   - Misc driver improvements such as devm and header ordering
 * cm32181
   - Add PM support.
 * cros_ec
   - Sensor location support
 * sx9324
   - Add precharge resistor setting
   - Add internal compensation resistor setting
   - Add CS idle/sleep mode.
 * sx9360
   - Add precharge resistor setting
 * vl53l0x
   - Handle reset GPIO, regulator and relax handling of irq type.
 
 Cleanup and minor fixes:
 
 Treewide changes
 - Cleanup of error handling in remove functions in many drivers.
 - Update dt-binding maintainers for a number of ADI bindings.
 - Several sets of conversion of drivers from device tree specific to
   generic device properties. Includes fixing up various related
   header and Kconfig issues.
 - Drop include of of.h from iio.h and fix up drivers that need to include
   it directly.
 - More moves of clusters of drivers into appropriate IIO_XXX namespaces.
 - Tree wide fix of a long running bug around DMA safety requirements.
   IIO was using __cacheline_aligned to pad iio_priv() structures. This
   worked for a long time by coincidence, but correct alignment is
   ARCH_KMALLOC_MINALIGN.  As there is activity around this area, introduce
   an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
   than every driver in future. Note, there have been no reports of this
   bug in the wild, and it may not happen on any platforms supported by
   upstream, so no rush to backport these fixes.
 
 Other cleanup
 * core
   - Switch to ida_alloc()/free()
   - Drop unused iio_get_time_res()
   - Octal permissions and DEVICE_ATTR_* macros.
   - Cleanup bared unsigned usage.
 * MAINTAINERS
   - Add include/dt-bindings/iio/ to the main IIO entry.
 * ad5380
   - Comment syntax fix.
 * ad74413r
   - Call to for_each_set_bit_from(), with from value as 0 replaced.
 * ad7768-1
   - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
 * adxl345
   - Fix wrong address in dt-binding example.
 * adxl367
   - Drop extra update of FIFO watermark.
 * at91-sama5d2
   - Limit requested watermark to the hwfifo size.
 * bmg160, bme680
   - Typos
 * cio-dac
   - Switch to iomap rather than direct use of ioports
 * kxsd9
   - Replace CONFIG_PM guards with new PM macros that let the compiler
     cleanly remove the unused code and structures when !CONFIG_PM
 * lsm6dsx
   - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
     to Namespace.
 * meson_saradc - general cleanup.
   - Avoid attaching resources to iio_dev->dev
   - Use same struct device for all error messages
   - Convert to dev_err_probe() and use local struct device *dev to
     reduce code complexity.
   - Use devm_clk_get_optional() instead of hand rolling.
   - Use regmap_read_poll_timeout() instead of hand rolling.
 * mma7660
   - Drop ACPI_PTR() use that is unhelpful.
 * mpu3050
   - Stop exporting symbols not used outside of module
   - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
 * ping
   - Typo fix
 * qcom-spmi-rradc
   - Typo fix
 * sc27xx
   - Convert to generic struct u32_fract
 * srf08
   - Drop a redundant check on !val
 * st_lsm6dsx
   - Limit the requested watermark to the hwfifo size.
 * stm32-adc
   - Use generic_handle_domain_irq() instead of opencoding.
   - Fix handling of ADC disable.
 * stm32-dac
   - Use str_enabled_disable() instead of open coding.
 * stx104
   - Switch to iomap rather than direct use of ioports
 * tsc2046
   - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
 * tsl2563
   - Replace flush_scheduled_work() with cancel_delayed_work_sync()
   - Replace cancel_delayed_work() with cancel_delayed_work_sync()
 * vl53l0x
   - Make the VDD regulator optional by allowing a dummy regulator.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmLQBwARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FohMHRAAi3nPM3IchXe886olumRgX5ke75vU+FNT
 sqQjqlpl6X7j5yNLU+HF6lC7zg3QzDnfWJ3Uo4C7s2sW7zO0997lkFx4jvF3yW9y
 0nLDgYm1Y1te/qR84BE355pMEsYEJVZyPI/Z8UfuBh6IfnSDeTE5ZwCvlRMAchtp
 AX+j1114FQvZ8yfdIlFjlN4vYSxCGgEZzfWYhpch/Jv1y2Q0L17bpv/KWGt1AYaF
 VugmKoNTM3WzIABBNGWQ4l4ZVVuVpuiVUL90AKv6Qf+yDSqw94tuIM0NZpJ1rqLr
 7tH568m7Eewh7zBp88PRB9XDiZVERvzdVQaT22+wlX+Vhn/SKeoK8PPpdLWD1YyG
 hXB0p+FGKncoKKgK1w9L7qRRNmsQDHowNHYMSjnzeBuyGQyEqwAXzNvvbiCqHh8y
 7b8GW+CYo7//wIarg74Xl+/4LwdCGcMUJNuTm1efEgC7yGToY7JD63DNo3sylaII
 bfoT06/yogaay/rVLZs5n+MvDONaDt4AbTTErG48s0TzqD/O8Ys85AF0IvKwQ80N
 WMxe4y+gdJ6VuU+ww9+6WdUzxnx+5gt+ZA2iLxZFekOIUi3Tj+q47F+17Jvwyt7U
 2wQzdtvNhHPwD5CqYpxD4iH/z5YFCtIHKjmUsVyAWGVbeuSS/QvFzpf39YWxBWO+
 W1w6RStUbXo=
 =IcsE
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO new device support, features and minor fixes for 5.20

Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.

One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.

Device support
* bmi088
  - Add support for bmi085 (accelerometer part of IMU)
  - Add support for bmi090l (accelerometer part of IMU)
* mcp4922
  - Add support for single channel device MCP4921
* rzg2l-adc
  - Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
  - Add support for scl3300 including refactoring driver to support
    multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
  - New driver for Qualcomm SPMI Round Robin ADC including necessary
    additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
  - Add compatible for DAC121C081 which is very similar to existing parts.

Features
* core
  - Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
  - Triggered buffer support
  - Activity and step counting
  - Misc driver improvements such as devm and header ordering
* cm32181
  - Add PM support.
* cros_ec
  - Sensor location support
* sx9324
  - Add precharge resistor setting
  - Add internal compensation resistor setting
  - Add CS idle/sleep mode.
* sx9360
  - Add precharge resistor setting
* vl53l0x
  - Handle reset GPIO, regulator and relax handling of irq type.

Cleanup and minor fixes:

Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
  generic device properties. Includes fixing up various related
  header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
  it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
  IIO was using __cacheline_aligned to pad iio_priv() structures. This
  worked for a long time by coincidence, but correct alignment is
  ARCH_KMALLOC_MINALIGN.  As there is activity around this area, introduce
  an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
  than every driver in future. Note, there have been no reports of this
  bug in the wild, and it may not happen on any platforms supported by
  upstream, so no rush to backport these fixes.

Other cleanup
* core
  - Switch to ida_alloc()/free()
  - Drop unused iio_get_time_res()
  - Octal permissions and DEVICE_ATTR_* macros.
  - Cleanup bared unsigned usage.
* MAINTAINERS
  - Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
  - Comment syntax fix.
* ad74413r
  - Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
  - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
  - Fix wrong address in dt-binding example.
* adxl367
  - Drop extra update of FIFO watermark.
* at91-sama5d2
  - Limit requested watermark to the hwfifo size.
* bmg160, bme680
  - Typos
* cio-dac
  - Switch to iomap rather than direct use of ioports
* kxsd9
  - Replace CONFIG_PM guards with new PM macros that let the compiler
    cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
  - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
    to Namespace.
* meson_saradc - general cleanup.
  - Avoid attaching resources to iio_dev->dev
  - Use same struct device for all error messages
  - Convert to dev_err_probe() and use local struct device *dev to
    reduce code complexity.
  - Use devm_clk_get_optional() instead of hand rolling.
  - Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
  - Drop ACPI_PTR() use that is unhelpful.
* mpu3050
  - Stop exporting symbols not used outside of module
  - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
  - Typo fix
* qcom-spmi-rradc
  - Typo fix
* sc27xx
  - Convert to generic struct u32_fract
* srf08
  - Drop a redundant check on !val
* st_lsm6dsx
  - Limit the requested watermark to the hwfifo size.
* stm32-adc
  - Use generic_handle_domain_irq() instead of opencoding.
  - Fix handling of ADC disable.
* stm32-dac
  - Use str_enabled_disable() instead of open coding.
* stx104
  - Switch to iomap rather than direct use of ioports
* tsc2046
  - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
  - Replace flush_scheduled_work() with cancel_delayed_work_sync()
  - Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
  - Make the VDD regulator optional by allowing a dummy regulator.

* tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits)
  iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt()
  iio: adc: xilinx-xadc: Make use of device properties
  iio: light: cm32181: Add PM support
  iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode
  iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode
  iio: adc: stm32-adc: disable adc before calibration
  iio: adc: stm32-adc: make safe adc disable
  iio: dac: ad5380: align '*' each line and drop unneeded blank line
  iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
  iio: Don't use bare "unsigned"
  dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
  iio: dac: mcp4922: add support to mcp4921
  iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace
  iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace
  iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace
  iio: adc: stm32-adc: Use generic_handle_domain_irq()
  proximity: vl53l0x: Make VDD regulator actually optional
  MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
  dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
  iio: gyro: bmg160: Fix typo in comment
  ...
2022-07-14 15:04:49 +02:00
Greg Kroah-Hartman 315f7e15c2 1st set of IIO fixes for the 5.19 cycle.
Most of these have been in next for a long time. Unfortunately there
 was one stray patch in the branch (wasn't a fix), so I've just rebased
 to remove that.
 
 * testing
   - Fix a missing MODULE_LICENSE() warning by restricting possible build
     configs.
 * Various drivers
   - Fix ordering of iio_get_trigger() being called before
     iio_trigger_register()
 * adi,admv1014
   - Fix dubious x & !y warning.
 * adi,axi-adc
   - Fix missing of_node_put() in error and normal paths.
 * aspeed,adc
   - Add missing of_node_put()
 * fsl,mma8452
   - Fix broken probing from device tree.
   - Drop check on return value of i2c write to device to cause reset as
     ACK will be missing (device reset before sending it).
 * fsl,vf610
   - Fix documentation of in_conversion_mode ABI.
 * iio-trig-sysfs
   - Ensure irq work has finished before freeing the trigger.
 * invensense,mpu3050
  - Disable regulators in error path.
 * invensense,icm42600
   - Fix collision of enum value of 0 with error path where 0 is no match.
 * renesas,rzg2l_Adc
   - Add missing fwnode_handle_put() in error path.
 * rescale
   - Fix a boolean logic bug for detection of raw + scale affecting an
     obscure corner case.
 * semtech,sx9324
   - Check return value of read of pin_defs
 * st,stm32-adc:
   - Fix interaction across ADC instances for some supported devices.
   - Drop false spurious IRQ messages.
   - Fix calibration value handling.  If we can't calibrate don't expose the
     vref_int channel.
   - Fix maximum clock rate for stm32pm15x
 * ti,ads131e08
   - Add missing fwnode_handle_put() in error paths.
 * xilinx,ams
   - Fix variable checked for error from platform_get_irq()
 * x-powers,axp288
   - Overide TS_PIN bias current for boards where it is not correctly
     initialized.
 * yamaha,yas530
   - Fix inverted check on calibration data being all zeros.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmKvUOsRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foj9+BAAgT/0u5a8SNuu0Cwu9JrHt/d8PHX5ZKfz
 CDzagToCptHIYbJfXPnoVi0rGoUWaKG5Oo6Z+1vEQ9jRy4HyAWSR/MrInbSyYdc9
 hiHiHEyhycjbe+Dc/NLd859fnQNGXhg5bp32u+nO5JGAQBM93KF7r05salO/XT1O
 34D3waV1cWcyhA9JqQysD/xczkYaWsuwGU33N7D5hfe9Ws0UqoQESYoUrO7N+RMr
 6AwT2qMvmIeoKkIupVw+N58knaSRN8qUACN9+BiR4dQyL40iu1BSrVSH4RCvTlsc
 WBGDz4G50lmRg3bE/bI1T53lFGjMpvjgOXOOP025llazumOM5azhhHGlA/iPk7a7
 NMPd1Oxuo7fGqASZiR0I6X4pfo2UEtwwusfIb+QfNZQ2bgEExPKtk4F/20Tpi4JY
 OV37Q3tTFYx3Wn+rpmzN50GDjMprgNBwYewmE8yAsoXVpsgmkqTVMqDMkmvEQBav
 ajuoUNC/ncMtfjWhphEKOUw2L96acltfIM1PTnMWEUaQq2FyidJM2DcoBh8MOZaa
 ms7qO9Hbab/+qPZJJfEQ/O+SkVDP/SWZdGYiazJdda731LzpPdwlQM2oGJjsNeQE
 4F5TWgTVfG/gN47NXyp53zbxls0nkvLy09I1xiUPA23DKnhiD+dsGK72OWth6cd2
 DQ++coHl140=
 =AtPS
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO fixes for the 5.19 cycle.

Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.

* testing
  - Fix a missing MODULE_LICENSE() warning by restricting possible build
    configs.
* Various drivers
  - Fix ordering of iio_get_trigger() being called before
    iio_trigger_register()
* adi,admv1014
  - Fix dubious x & !y warning.
* adi,axi-adc
  - Fix missing of_node_put() in error and normal paths.
* aspeed,adc
  - Add missing of_node_put()
* fsl,mma8452
  - Fix broken probing from device tree.
  - Drop check on return value of i2c write to device to cause reset as
    ACK will be missing (device reset before sending it).
* fsl,vf610
  - Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
  - Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
 - Disable regulators in error path.
* invensense,icm42600
  - Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
  - Add missing fwnode_handle_put() in error path.
* rescale
  - Fix a boolean logic bug for detection of raw + scale affecting an
    obscure corner case.
* semtech,sx9324
  - Check return value of read of pin_defs
* st,stm32-adc:
  - Fix interaction across ADC instances for some supported devices.
  - Drop false spurious IRQ messages.
  - Fix calibration value handling.  If we can't calibrate don't expose the
    vref_int channel.
  - Fix maximum clock rate for stm32pm15x
* ti,ads131e08
  - Add missing fwnode_handle_put() in error paths.
* xilinx,ams
  - Fix variable checked for error from platform_get_irq()
* x-powers,axp288
  - Overide TS_PIN bias current for boards where it is not correctly
    initialized.
* yamaha,yas530
  - Fix inverted check on calibration data being all zeros.

* tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits)
  iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
  iio: accel: mma8452: ignore the return value of reset operation
  iio: adc: stm32: fix maximum clock rate for stm32mp15x
  iio: adc: stm32: fix vrefint wrong calibration value handling
  iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
  iio: adc: vf610: fix conversion mode sysfs node name
  iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
  iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
  iio:humidity:hts221: rearrange iio trigger get and register
  iio:chemical:ccs811: rearrange iio trigger get and register
  iio:accel:mxc4005: rearrange iio trigger get and register
  iio:accel:kxcjk-1013: rearrange iio trigger get and register
  iio:accel:bma180: rearrange iio trigger get and register
  iio: afe: rescale: Fix boolean logic bug
  iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
  iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
  iio: adc: stm32: Fix ADCs iteration in irq handler
  iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
  iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
  iio: trigger: sysfs: fix use-after-free on remove
  ...
2022-06-20 09:49:52 +02:00
Uwe Kleine-König d04d46dd82 iio:magnetometer:mbc150: Make bmc150_magn_remove() return void
bmc150_magn_remove() always returns zero. Make it return no value which
makes it easier to see in the callers that there is no error to handle.

Also the return value of i2c driver remove callbacks is ignored anyway.
This prepares making i2c remove callbacks return void, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220514133250.307955-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-11 14:35:27 +01:00
Greg Kroah-Hartman bcfa954650 First set of IIO new device support, features and cleanup for 5.19
Usual mixed bag. Stand out this time is Andy Shevchenko's continuing
 effort to move drivers over the generic firmware interfaces.
 
 Device support
 * sprd,sc2720
   - upm9620 binding addition.
   - Refactor and support for sc2720, sc2721 and sc2730.
 * ti,ads1015
   - Refactor driver and add support for TLA2024.
 
 Device support (IDs only)
 * invensense,mpu6050
   - Add ID for ICM-20608-D.
 * st,accel:
   -  Add ID for lis302dl.
 * st,lsm6dsx
   - Add support for ASM330LHHX (can fallback to LSM6DSR.)
 
 Features
 * convert drivers to device properties
   - IIO core
   - adi,ad7266
   - adi,adis16480
   - adi,adxl355
   - bosch,bmi160
   - domintech,dmard06
   - fsl,fxas21002c
   - invensense,mpu3050
   - linear,ltc2983
   - linear,ltc2632
   - maxbotix,mb1232
   - maxim,max31856
   - maxim,max31865
   - multiplexer
   - ping
   - rescale
   - taos,tsl2772
 * core
   - Add runtime check on whether realbits fit in storagebits for each
     channel.
 * adi,ad_sigma_delta
   - Add sequencer support and relevant update_scan_mode callbacks for
     adi,ad7192 and adi,ad7124.
 
 Cleanup and minor fixes
 * MAINTAINERS
   - Update Lorenzo Bianconi's email address for IIO drivers.
   - Add entry for ad3552r and update maintainer in dt-binding doc.
 * tree-wide
   - Replace strtobool() with kstrtobool().
   - Drop false OF dependencies.
 * core
   - Tidy up and document IIO modes.
   - Take iio_buffer_enabled() out of header allowing current_mode to be
     moved to the opaque structure.
   - As all kfifo buffers use the same mode value, drop that parameter
     and set it unconditionally.
   - White space fixes and similar.
   - Drop use of list iterator variable for
     list_for_each_entry_continue_reverse and use list_prepare_entry to
     restart.
 * sysfs-trigger
   - Replace use of 'found' variable with dedicate list iterator variable.
 * adi,ad7124
   - Drop misleading shift.
 * adi,ad2s1210
   - Remove redundant local variable assignment.
 * adi,adis16480
   - Use local device pointer to reduce repetition.
   - Improve handling of clocks.
 * domintech,dmard09
   - White space.
 * dummy driver
   - Improve error handling.
 * fsl,mma8452
   - Add missing documentation of name element.
 * invensense,mpu3050
   - Stop remove() returning non 0.
 * kionix,kxsd9
   - White space.
 * linear,ltc2688
   - Use local variable for struct device.
   - Combine of_node_put() error handling paths.
 * linear,ltc2983
   - Avoid use of constants in messages where a define is available.
 * microchip,mcp4131
   - Fix compatible in dt example.
 * pni,rm3100
   - Stop directly accessing iio_dev->current_mode just to find out
     if the buffer is enabled.
 * renesas,rzg2l
   - Relax kconfig constraint to include newer devices.
 * sprd,sc27xx
   - Fix wrong scaling mask.
   - Improve the calibration values.
 * samsung,ssp
   - Replace a 'found' variable in favor of an explicit value that was
     found.
 * sensortek,stk3xx
   - Add proximity-near-level binding and driver support.
 * st,st_sensors:
   - Drop unused accel_type enum.
   - Return early in *_write_raw()
   - Drop unnecessary locking in _avail functions.
   - Add local lock to protect odr against concurrent updates allowing
     mlock to no longer be used outside of the core.
   - Use iio_device_claim_direct_mode() rather than racy checking of
     the current mode.
 * st,stmpe-adc
   - Fix checks on wait_for_completion_timeout().
   - Allow use of of_device_id for matching.
 * st,stm32-dfsdm
   - Stop accessing iio_dev->current_mode to find out if the buffer
     is enabled (so we can hide that variable in the opaque structure)
 * st,vl53l0x
   - Fix checks on wait_for_completion_timeout.
 * ti,ads1015
   - Add missing ID for ti,ads1115 in binding doc.
   - Convert from repeated chip ID look up to selecting static const
     data.
   - Switch to read_avail() callback.
 * ti,ads8688
   - Use of_device_id for driver matching.
 * ti,palmas-adc
   - Drop a warning on minor calibration mismatch leading to slightly
     negative values after applying the calibration.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmJy4f0RHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FohyzQ//e2RJF/oUjd5WreX9fywnK2qwXE0n6yfQ
 OrXuLvdAZ4ZwELmQyCg7XWVZY1u6JXvW1/TJXpjI0Y4sXSCSs+Z514BJOQYOrEyv
 2MH5mqkXq5IeskKAOxKBLeOz8e8txKyB2S4lDSVH11y40i32U+3SMdZHUt4ThVJU
 xd6FMJqEvXrbramQSj3O61YvICBedOcoKe4Da7nJtmr42zkDuBYJRlmtCnRoXx1l
 wrNgozEdqMh/JIRayVjlKfPpu3OiEFwt/uKvLEepKei/djUMdRnMyjTcXTziDGNg
 +B/51pWm7BLKE3YiqVAFZGBOi7OXZ0bRFVaUZyPOOP/xRr7DrdDRgFVpM4/Z9D0y
 p3anrWwkp6UF+IlatxjIDNGiAlWlWgNUZsFxWBMjRHAunOGhlrTNV7PVh81+LNBM
 I8Z9B+FDW/ECuxRSP2oK0an+4fVwJiOfGWSnuo6cIkW2ewh8kwr6Vvnu3bDytyew
 7xU9TvJN3fhYgU8pWK1VQ3ZIYan4zcAL/v40KBHDVIF49iKerYbKHGkCI4vJvakH
 lzf+dsUzYfQesTmB2sQUDdVvwpBtVd/xbD+mytRWv3bjapGIZ9r9LDGbjr8rgH0M
 egyPpxfdfVYjTWdpIx/tDHfyPEkuL7EjitKV7B83NbMq0N6GhQN2sT8L8DM7aC5p
 0x7kV5B4ZnE=
 =wZYX
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

First set of IIO new device support, features and cleanup for 5.19

Usual mixed bag. Stand out this time is Andy Shevchenko's continuing
effort to move drivers over the generic firmware interfaces.

Device support
* sprd,sc2720
  - upm9620 binding addition.
  - Refactor and support for sc2720, sc2721 and sc2730.
* ti,ads1015
  - Refactor driver and add support for TLA2024.

Device support (IDs only)
* invensense,mpu6050
  - Add ID for ICM-20608-D.
* st,accel:
  -  Add ID for lis302dl.
* st,lsm6dsx
  - Add support for ASM330LHHX (can fallback to LSM6DSR.)

Features
* convert drivers to device properties
  - IIO core
  - adi,ad7266
  - adi,adis16480
  - adi,adxl355
  - bosch,bmi160
  - domintech,dmard06
  - fsl,fxas21002c
  - invensense,mpu3050
  - linear,ltc2983
  - linear,ltc2632
  - maxbotix,mb1232
  - maxim,max31856
  - maxim,max31865
  - multiplexer
  - ping
  - rescale
  - taos,tsl2772
* core
  - Add runtime check on whether realbits fit in storagebits for each
    channel.
* adi,ad_sigma_delta
  - Add sequencer support and relevant update_scan_mode callbacks for
    adi,ad7192 and adi,ad7124.

Cleanup and minor fixes
* MAINTAINERS
  - Update Lorenzo Bianconi's email address for IIO drivers.
  - Add entry for ad3552r and update maintainer in dt-binding doc.
* tree-wide
  - Replace strtobool() with kstrtobool().
  - Drop false OF dependencies.
* core
  - Tidy up and document IIO modes.
  - Take iio_buffer_enabled() out of header allowing current_mode to be
    moved to the opaque structure.
  - As all kfifo buffers use the same mode value, drop that parameter
    and set it unconditionally.
  - White space fixes and similar.
  - Drop use of list iterator variable for
    list_for_each_entry_continue_reverse and use list_prepare_entry to
    restart.
* sysfs-trigger
  - Replace use of 'found' variable with dedicate list iterator variable.
* adi,ad7124
  - Drop misleading shift.
* adi,ad2s1210
  - Remove redundant local variable assignment.
* adi,adis16480
  - Use local device pointer to reduce repetition.
  - Improve handling of clocks.
* domintech,dmard09
  - White space.
* dummy driver
  - Improve error handling.
* fsl,mma8452
  - Add missing documentation of name element.
* invensense,mpu3050
  - Stop remove() returning non 0.
* kionix,kxsd9
  - White space.
* linear,ltc2688
  - Use local variable for struct device.
  - Combine of_node_put() error handling paths.
* linear,ltc2983
  - Avoid use of constants in messages where a define is available.
* microchip,mcp4131
  - Fix compatible in dt example.
* pni,rm3100
  - Stop directly accessing iio_dev->current_mode just to find out
    if the buffer is enabled.
* renesas,rzg2l
  - Relax kconfig constraint to include newer devices.
* sprd,sc27xx
  - Fix wrong scaling mask.
  - Improve the calibration values.
* samsung,ssp
  - Replace a 'found' variable in favor of an explicit value that was
    found.
* sensortek,stk3xx
  - Add proximity-near-level binding and driver support.
* st,st_sensors:
  - Drop unused accel_type enum.
  - Return early in *_write_raw()
  - Drop unnecessary locking in _avail functions.
  - Add local lock to protect odr against concurrent updates allowing
    mlock to no longer be used outside of the core.
  - Use iio_device_claim_direct_mode() rather than racy checking of
    the current mode.
* st,stmpe-adc
  - Fix checks on wait_for_completion_timeout().
  - Allow use of of_device_id for matching.
* st,stm32-dfsdm
  - Stop accessing iio_dev->current_mode to find out if the buffer
    is enabled (so we can hide that variable in the opaque structure)
* st,vl53l0x
  - Fix checks on wait_for_completion_timeout.
* ti,ads1015
  - Add missing ID for ti,ads1115 in binding doc.
  - Convert from repeated chip ID look up to selecting static const
    data.
  - Switch to read_avail() callback.
* ti,ads8688
  - Use of_device_id for driver matching.
* ti,palmas-adc
  - Drop a warning on minor calibration mismatch leading to slightly
    negative values after applying the calibration.

* tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits)
  iio: ti-ads8688: use of_device_id for OF matching
  iio: stmpe-adc: use of_device_id for OF matching
  dt-bindings: iio: Fix incorrect compatible strings in examples
  iio: gyro: mpu3050: Make mpu3050_common_remove() return void
  iio: dac: ltc2632: Make use of device properties
  iio: temperature: max31865: Make use of device properties
  iio: proximity: mb1232: Switch to use fwnode_irq_get()
  iio: imu: adis16480: Improve getting the optional clocks
  iio: imu: adis16480: Use temporary variable for struct device
  iio: imu: adis16480: Make use of device properties
  staging: iio: ad2s1210: remove redundant assignment to variable negative
  iio: adc: sc27xx: add support for PMIC sc2730
  iio: adc: sc27xx: add support for PMIC sc2720 and sc2721
  iio: adc: sc27xx: refactor some functions for support more PMiCs
  iio: adc: sc27xx: structure adjustment and optimization
  iio: adc: sc27xx: Fine tune the scale calibration values
  iio: adc: sc27xx: fix read big scale voltage not right
  dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding
  iio: proximity: stk3310: Export near level property for proximity sensor
  dt-bindings: iio: light: stk33xx: Add proximity-near-level
  ...
2022-05-19 16:53:08 +02:00
Linus Walleij bb52d3691d iio: magnetometer: yas530: Fix memchr_inv() misuse
The call to check if the calibration is all zeroes is doing
it wrong: memchr_inv() returns NULL if the the calibration
contains all zeroes, but the check is for != NULL.

Fix it up. It's probably not an urgent fix because the inner
check for BIT(7) in data[13] will save us. But fix it.

Fixes: de8860b1ed ("iio: magnetometer: Add driver for Yamaha YAS530")
Reported-by: Jakob Hauser <jahau@rocketmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220501195029.151852-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-07 15:34:19 +01:00
Andy Shevchenko 96a531799d iio: magnetometer: ak8974: Drop dependency on OF
Nothing in this driver depends on OF firmware so drop the dependency
to remove the false impression such a dependency exists.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220413184502.20998-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28 19:22:55 +01:00
Zheyu Ma 3a26787dac iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()
When the driver fails to enable the regulator 'vid', we will get the
following splat:

[   79.955610] WARNING: CPU: 5 PID: 441 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   79.959641] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   79.967570] Call Trace:
[   79.967773]  <TASK>
[   79.967951]  regulator_put+0x1f/0x30
[   79.968254]  devres_release_group+0x319/0x3d0
[   79.968608]  i2c_device_probe+0x766/0x940

Fix this by disabling the 'vdd' regulator when failing to enable 'vid'
regulator.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220409034849.3717231-2-zheyuma97@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10 16:59:29 +01:00
Miquel Raynal 1234596839 iio: st_sensors: Stop abusing mlock to ensure internal coherency
An odr_lock has been introduced to protect local accesses to the odr
internal cache and ensure the cached value always reflected the actual
value. Using the mlock() for this purpose is no longer needed, so let's
drop these extra mutex_lock/unlock() calls.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-8-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10 16:21:45 +01:00
Miquel Raynal 69c9887997 iio: st_sensors: Return as early as possible from the _write_raw() callbacks
As there is no cleanup to do, let's return as early as possible in the
various ST sensor drivers _write_raw() callback functions.

There is no functional change.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-5-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10 16:15:02 +01:00
Miquel Raynal f4d7f88339 iio: magnetometer: rm3100: Stop abusing the ->currentmode
This is an internal variable for the core, here it is set to a "default"
value by the driver in order to later be able to perform checks against
it. None of this is needed because this check actually cares about the
buffers being enabled or not. So it is an unproper side-channel access
to the information "are the buffers enabled?", returned officially by
the iio_buffer_enabled() helper. Use this helper instead.

Cc: Song Qiang <songqiang1304521@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-3-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10 16:15:02 +01:00
Linus Torvalds 02e2af20f4 Char/Misc and other driver updates for 5.18-rc1
Here is the big set of char/misc and other small driver subsystem
 updates for 5.18-rc1.
 
 Included in here are merges from driver subsystems which contain:
 	- iio driver updates and new drivers
 	- fsi driver updates
 	- fpga driver updates
 	- habanalabs driver updates and support for new hardware
 	- soundwire driver updates and new drivers
 	- phy driver updates and new drivers
 	- coresight driver updates
 	- icc driver updates
 
 Individual changes include:
 	- mei driver updates
 	- interconnect driver updates
 	- new PECI driver subsystem added
 	- vmci driver updates
 	- lots of tiny misc/char driver updates
 
 There will be two merge conflicts with your tree, one in MAINTAINERS
 which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
 which also should be easy to resolve.
 
 All of these have been in linux-next for a while with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
 R4bgCjfg8BWIBcVVXg3/
 =WWXC
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  updates for 5.18-rc1.

  Included in here are merges from driver subsystems which contain:

   - iio driver updates and new drivers

   - fsi driver updates

   - fpga driver updates

   - habanalabs driver updates and support for new hardware

   - soundwire driver updates and new drivers

   - phy driver updates and new drivers

   - coresight driver updates

   - icc driver updates

  Individual changes include:

   - mei driver updates

   - interconnect driver updates

   - new PECI driver subsystem added

   - vmci driver updates

   - lots of tiny misc/char driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
  firmware: google: Properly state IOMEM dependency
  kgdbts: fix return value of __setup handler
  firmware: sysfb: fix platform-device leak in error path
  firmware: stratix10-svc: add missing callback parameter on RSU
  arm64: dts: qcom: add non-secure domain property to fastrpc nodes
  misc: fastrpc: Add dma handle implementation
  misc: fastrpc: Add fdlist implementation
  misc: fastrpc: Add helper function to get list and page
  misc: fastrpc: Add support to secure memory map
  dt-bindings: misc: add fastrpc domain vmid property
  misc: fastrpc: check before loading process to the DSP
  misc: fastrpc: add secure domain support
  dt-bindings: misc: add property to support non-secure DSP
  misc: fastrpc: Add support to get DSP capabilities
  misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
  misc: fastrpc: separate fastrpc device from channel context
  dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
  dt-bindings: nvmem: make "reg" property optional
  nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
  nvmem: dt-bindings: Fix the error of dt-bindings check
  ...
2022-03-28 12:27:35 -07:00
Linus Torvalds ad9c6ee642 spi: Updates for v5.18
The overwhelming bulk of this pull request is a change from Uwe
 Kleine-König which changes the return type of the remove() function to
 void as part of some wider work he's doing to do this for all bus types,
 causing updates to most SPI device drivers.  The branch with that on has
 been cross merged with a couple of other trees which added new SPI
 drivers this cycle, I'm not expecting any build issues resulting from
 the change.
 
 Otherwise it's been a relatively quiet release with some new device
 support, a few minor features and the welcome completion of the
 conversion of the subsystem to use GPIO descriptors rather than numbers:
 
  - Change return type of remove() to void.
  - Completion of the conversion of SPI controller drivers to use GPIO
    descriptors rather than numbers.
  - Quite a few DT schema conversions.
  - Support for multiple SPI devices on a bus in ACPI systems.
  - Big overhaul of the PXA2xx SPI driver.
  - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
    MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
    Sunplus SP7021.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
 h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
 fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
 TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
 dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
 Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
 s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
 =4tlR
 -----END PGP SIGNATURE-----

Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "The overwhelming bulk of this pull request is a change from Uwe
  Kleine-König which changes the return type of the remove() function to
  void as part of some wider work he's doing to do this for all bus
  types, causing updates to most SPI device drivers. The branch with
  that on has been cross merged with a couple of other trees which added
  new SPI drivers this cycle, I'm not expecting any build issues
  resulting from the change.

  Otherwise it's been a relatively quiet release with some new device
  support, a few minor features and the welcome completion of the
  conversion of the subsystem to use GPIO descriptors rather than
  numbers:

   - Change return type of remove() to void.

   - Completion of the conversion of SPI controller drivers to use GPIO
     descriptors rather than numbers.

   - Quite a few DT schema conversions.

   - Support for multiple SPI devices on a bus in ACPI systems.

   - Big overhaul of the PXA2xx SPI driver.

   - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
     MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
     Sunplus SP7021"

[ And this is obviously where that spi change that snuck into the
  regulator tree _should_ have been :^]

* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
  spi: fsi: Implement a timeout for polling status
  spi: Fix erroneous sgs value with min_t()
  spi: tegra20: Use of_device_get_match_data()
  spi: mediatek: add ipm design support for MT7986
  spi: Add compatible for MT7986
  spi: sun4i: fix typos in comments
  spi: mediatek: support tick_delay without enhance_timing
  spi: Update clock-names property for arm pl022
  spi: rockchip-sfc: fix platform_get_irq.cocci warning
  spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
  spi: dt-bindings: samsung: Add fsd spi compatible
  spi: topcliff-pch: Prevent usage of potentially stale DMA device
  spi: tegra210-quad: combined sequence mode
  spi: tegra210-quad: add acpi support
  spi: npcm-fiu: Fix typo ("npxm")
  spi: Fix Tegra QSPI example
  spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
  spi: cadence: fix platform_get_irq.cocci warning
  spi: Update NXP Flexspi maintainer details
  dt-bindings: mfd: maxim,max77802: Convert to dtschema
  ...
2022-03-21 18:33:57 -07:00
Greg Kroah-Hartman cc6ce5ac2c First set of new device support, fixes, cleanups and features for IIO in 5.18
This cycle we had quite a few series that applied similar changes
 to lots of drivers. To keep this description manageable I have
 called those out in their own section rather than per driver.
 
 Particularly pleased to see the long running AFE precision series
 going in this cycle.
 
 Series includes some late breaking fixes.
 
 New device support
 * adi,ada4250 amplifier
   - New driver and dt bindings for this programmable gain amplifier.
 * adi,admv1014 microwave down-converter
   - New driver, dt bindings and some device specific ABI that
     may be generalized as more drivers for devices similar to this
     are added.
 * adi,admv4420 K Band down-converter.
   - New driver and dt bindings.
 * adi,adxl367 accelerometer driver.
   - New driver, dt-bindings + some new IIO ABI definitions to support
     reference magnitude events where an estimate of the acceleration
     due to gravity has been removed.
   - A few fixes as follow up patches.
 * adi,ltc2688 DAC with toggle and dither modes.
   - New driver and bindings. Includes some new driver specific (for now)
     ABI for handling toggle mode and the addition of a dither waveform to
     the DAC output.
 * AFE (analog front end) add support for additional types of analog device
   in front of an ADC.
   - RTD temperature sensors with dt bindings.
   - Temperature transducers wit dt bindings.
   - Related cleanup and features listed in other sections below.
 * maxim,ds3502 potentiometer.
   - Add support to ds1803 driver which required significant rework.
 * mediatek,mt2701-auxadc driver
   - Add mediatek,mt8186-auxadc - id table and chip specific info only.
 * semtech,sx9324, semtech,ax9360
   - Substantial refactoring of sx9310 to extract core logic for reuse
     into a separate module
   - New driver using this supporting sx9324 proximity sensors.
   - New driver using this supporting sx9360 proximity sensors.
 * silan,sc7a20
   - Compatible with the st,lis2dh (or nearly anyway) so add ID and
     chip specific info to enable support. Also silan vendor ID added
     for dt-bindings.
 
 Staging graduation
 * adi,ad7280a monitoring ADC for stacked lithium-ion batteries in
   electric cars and similar.
   - Substantial rework of driver required to bring inline with current
     IIO best practice. An unusual device in IIO so some interesting features
     we may see more of in future.
 
 Multiple driver/core cleanup
 - Use sysfs_emit() in simple locations where there is no path to change
   to various core created attributes.
 - Trivial white space fixes around inconsistency between space after { and
   before } in id tables.
 - Introduce new handling for fractional types to avoid repeated similar
   implementations. Use this in 3 drivers. Note this is also targeted
   at future use in the AFE driver and was motivated by discussions
   around the precision related work on that driver.
 - of related header cleanups - drop of*.h and add mod_devicetable.h as
   appropriate.
 - Move a number of symbol exports into IIO_* namespaces.  Two categories,
   1) Library used by multiple drivers e.g. st_sensors
   2) Core driver module exporting functions used by bus specific modules.
   A few related cleanups in this set.
 - Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and
   similar to simplify drivers and take advantage of these new macros
   allowing the compiler to do the job or removing unused code without
   the need for __maybe_unused markings. Conversion of other drivers to
   these new macros ongoing.
 
 Features
 * adi,adf4350
   - Switch from of specific to generic device properties enabling use with
     other firmware types.
 * adi,adx345
   - Switch from of specific to generic device properties.
   - Add ACPI ID ADS0345
   - Related driver cleanup.
 * adi,hmc425a
   - Switch from of specific to generic device properties.
 * afe analog rescaler driver
   - Wider range of types supported for scale.
   - Support offset.
   - Kunit tests.
 * atlas,ezo-sensor
   - Convert from of to device properties.
 * fsl,mma8452
   - Support mount matrix.
 * infineon,dps310:
   - Add ACPI ID IFX3100.
 * invensense,mpu6050
   - Convert to generic device properties.
 * maxim,ds1803
   - Add out_raw_available before supporting more devices.
   - Convert from of specific to device properties.
 * samsung,ssp_sensors
   - Convert from of specific to device properties.
 * st,stm32-timer trigger
   - Convert from of specific to device properties.
 * ti,hdc101x
   - Add ACPI ID TXNW1010.
 * ti,tsc2046:
   - Add read_raw support to enable use of iio_hwmon and similar.
 
 Fixes / cleanup.
 * mailmap
   - Update for Cai Huoqing
 * MAINTAINERS
   - Fix Analog Devices related links.
   - Add entry for ADRF6780
   - Add entry for ADMV1013
   - Add entry for AD7293
   - Add entry for ADMV8818
   - Update files listed for adis-lib
 * iio core:
   - Fix wrong comment about current_mode being something a driver should
     ever access.
   - Use struct_size() rather than open coding in industrialio-hw-consumer
 * adi,axl355
   - Use units.h definitions instead of local versions.
 * adi,adis-lib
   - Simplify *updated_bits() macro
   - Whitespace cleanup.
 * afe - Note many of these fixes only apply to particular configurations
   so the problems have probably not been seen in the wild, but will be
   visible with new usecases enabled this cycle.
   - Fix application of consumer scale for IIO_VAL_INT.
   - Apply a scale of 1 when no scale is provided.
   - Make best effort to establish a valid offset value for fractional
     cases.
   - Use s64 for scale calculations where parameters may be signed.
   - Tidy up include order.
   - Improve accuracy for small fractional sales
   - Reduce risk of integer overflow.
 * ams,as3935
   - Use devm_delayed_work_autocancel() to replace open coded equivalent.
 * aspeed,adc
   - Fix wrong use of divider flag.
 * atmel,sama5d2-adc
   - Relax atmel,trigger-edge-type to optional.
   - Drop Ludovic Desroches from listed maintainers of the dt-binding
     inline with previous MAINTAINERS entry update.
 * fsl,mma8452
   - Fix probing when i2c_device_id used.
   - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
     Use dev_to_iio_dev() instead. Note the original path in here
     worked more by luck than design.
 * invensense,mpu6050
   - Drop ACPI_PTR() protection to avoid an unused warning.
   - Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to
     simplify handling.
 * motorola,cpcap-adc
   - Drop unused assignment.
 * qcom,spmi-adc
   - Fix wrong example of 'reg' in binding document.
 * renesas,rzg2l-adc
   - Trivial typo fix.
 * semtech,sx9360
   - Fix wrong register handling for event generation.
 * st_sensors
   - Allow manual disabling of I2C or SPI module if not needed for a particular
     board. Default is still to enable the bus specific module if
     appropriate bus is supported.
 * st,lsm6dsx
   - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
     Use dev_to_iio_dev() instead.
 * ti,palmas-gpadc
   - Split the interrupt fields in the dt-binding example
 * ti,tsc2046
   - Rework state machine to improve readability after recent debugging of
     an issue fixed elsewhere.
   - Add a sanity check to avoid very large memory allocations if a crazy
     delay is specified.
 * ti,twl6030
   - Add error handling if devm_request_threaded_irq() fails.
 * xilinx,ams
   - Use devm_delayed_work_autocancel() instead of open coding equivalent.
   - Fix missing required clock entry in dt-binding.
   - Fix miss counting of channels resulting in ps channels not
     being enabled.
   - Fix incorrect values written to sequencer registers.
   - Fix sequence for single channel reading.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmIfdM8RHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FoiGlQ//UyRpMX9Bv97LAbMDnqIHLYroTLJA3WFQ
 AaL/DKB1cVjBCoHlp24qaQrmncvifPF7sKJGKWf7yCHL5fraAYL/kHsCo/jECTho
 QOk9QaPAMP9ChOoVoP8iz5qrdF2qyoFUG69bX+QYeKhSKzcK1QPRTQ13LIL43d9p
 OJX47Cu7FfFwuAs5VKSVgpcII0tctv+Fdo6BkkeI+6w/vx2sFSzRaqRtc1ZU4Uav
 s51dM9JMos52e/G8yQAEOC24QUId4EHxo7QR8WjzZ47yIHRulpYwM6pWAtvOqEy9
 eV++yz581+Uqs/qaDDk8nJdpa8aEv/NvfAK6gufB9UOWziMoR3G1pPFWoOLbcyIt
 IcUG+QyyEiIlmlwDE/m2OcSMzsxgrkEHNb3SE7ZkWZKP8OasGdVMHa7yEKCgLmzM
 S8EY9TsNA50A2VtowAPrdk74TVG2WeIDvEH2MMAUMjgW2DzsW9cmwFrziyj7ZPLX
 onoEjd/kpL2zzAArEadvzD1z1lLJcOUWn8ST2kbPQG8n/rp5y2u5PvgWRoO9zJlD
 ztX614XYRgRUhMrgb0q0nCTi07mnBZrR3P8Hnx1HOoZon/DIqPSL7NumITG09cQc
 fHqewQOU/WqoTH4tNvfywnBL/VAcxKFlc0B2rWIvp6dD5b0TU34ZdebcjLT1zYeC
 6YQKbRaRjVg=
 =UnWv
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

First set of new device support, fixes, cleanups and features for IIO in 5.18

This cycle we had quite a few series that applied similar changes
to lots of drivers. To keep this description manageable I have
called those out in their own section rather than per driver.

Particularly pleased to see the long running AFE precision series
going in this cycle.

Series includes some late breaking fixes.

New device support
* adi,ada4250 amplifier
  - New driver and dt bindings for this programmable gain amplifier.
* adi,admv1014 microwave down-converter
  - New driver, dt bindings and some device specific ABI that
    may be generalized as more drivers for devices similar to this
    are added.
* adi,admv4420 K Band down-converter.
  - New driver and dt bindings.
* adi,adxl367 accelerometer driver.
  - New driver, dt-bindings + some new IIO ABI definitions to support
    reference magnitude events where an estimate of the acceleration
    due to gravity has been removed.
  - A few fixes as follow up patches.
* adi,ltc2688 DAC with toggle and dither modes.
  - New driver and bindings. Includes some new driver specific (for now)
    ABI for handling toggle mode and the addition of a dither waveform to
    the DAC output.
* AFE (analog front end) add support for additional types of analog device
  in front of an ADC.
  - RTD temperature sensors with dt bindings.
  - Temperature transducers wit dt bindings.
  - Related cleanup and features listed in other sections below.
* maxim,ds3502 potentiometer.
  - Add support to ds1803 driver which required significant rework.
* mediatek,mt2701-auxadc driver
  - Add mediatek,mt8186-auxadc - id table and chip specific info only.
* semtech,sx9324, semtech,ax9360
  - Substantial refactoring of sx9310 to extract core logic for reuse
    into a separate module
  - New driver using this supporting sx9324 proximity sensors.
  - New driver using this supporting sx9360 proximity sensors.
* silan,sc7a20
  - Compatible with the st,lis2dh (or nearly anyway) so add ID and
    chip specific info to enable support. Also silan vendor ID added
    for dt-bindings.

Staging graduation
* adi,ad7280a monitoring ADC for stacked lithium-ion batteries in
  electric cars and similar.
  - Substantial rework of driver required to bring inline with current
    IIO best practice. An unusual device in IIO so some interesting features
    we may see more of in future.

Multiple driver/core cleanup
- Use sysfs_emit() in simple locations where there is no path to change
  to various core created attributes.
- Trivial white space fixes around inconsistency between space after { and
  before } in id tables.
- Introduce new handling for fractional types to avoid repeated similar
  implementations. Use this in 3 drivers. Note this is also targeted
  at future use in the AFE driver and was motivated by discussions
  around the precision related work on that driver.
- of related header cleanups - drop of*.h and add mod_devicetable.h as
  appropriate.
- Move a number of symbol exports into IIO_* namespaces.  Two categories,
  1) Library used by multiple drivers e.g. st_sensors
  2) Core driver module exporting functions used by bus specific modules.
  A few related cleanups in this set.
- Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and
  similar to simplify drivers and take advantage of these new macros
  allowing the compiler to do the job or removing unused code without
  the need for __maybe_unused markings. Conversion of other drivers to
  these new macros ongoing.

Features
* adi,adf4350
  - Switch from of specific to generic device properties enabling use with
    other firmware types.
* adi,adx345
  - Switch from of specific to generic device properties.
  - Add ACPI ID ADS0345
  - Related driver cleanup.
* adi,hmc425a
  - Switch from of specific to generic device properties.
* afe analog rescaler driver
  - Wider range of types supported for scale.
  - Support offset.
  - Kunit tests.
* atlas,ezo-sensor
  - Convert from of to device properties.
* fsl,mma8452
  - Support mount matrix.
* infineon,dps310:
  - Add ACPI ID IFX3100.
* invensense,mpu6050
  - Convert to generic device properties.
* maxim,ds1803
  - Add out_raw_available before supporting more devices.
  - Convert from of specific to device properties.
* samsung,ssp_sensors
  - Convert from of specific to device properties.
* st,stm32-timer trigger
  - Convert from of specific to device properties.
* ti,hdc101x
  - Add ACPI ID TXNW1010.
* ti,tsc2046:
  - Add read_raw support to enable use of iio_hwmon and similar.

Fixes / cleanup.
* mailmap
  - Update for Cai Huoqing
* MAINTAINERS
  - Fix Analog Devices related links.
  - Add entry for ADRF6780
  - Add entry for ADMV1013
  - Add entry for AD7293
  - Add entry for ADMV8818
  - Update files listed for adis-lib
* iio core:
  - Fix wrong comment about current_mode being something a driver should
    ever access.
  - Use struct_size() rather than open coding in industrialio-hw-consumer
* adi,axl355
  - Use units.h definitions instead of local versions.
* adi,adis-lib
  - Simplify *updated_bits() macro
  - Whitespace cleanup.
* afe - Note many of these fixes only apply to particular configurations
  so the problems have probably not been seen in the wild, but will be
  visible with new usecases enabled this cycle.
  - Fix application of consumer scale for IIO_VAL_INT.
  - Apply a scale of 1 when no scale is provided.
  - Make best effort to establish a valid offset value for fractional
    cases.
  - Use s64 for scale calculations where parameters may be signed.
  - Tidy up include order.
  - Improve accuracy for small fractional sales
  - Reduce risk of integer overflow.
* ams,as3935
  - Use devm_delayed_work_autocancel() to replace open coded equivalent.
* aspeed,adc
  - Fix wrong use of divider flag.
* atmel,sama5d2-adc
  - Relax atmel,trigger-edge-type to optional.
  - Drop Ludovic Desroches from listed maintainers of the dt-binding
    inline with previous MAINTAINERS entry update.
* fsl,mma8452
  - Fix probing when i2c_device_id used.
  - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
    Use dev_to_iio_dev() instead. Note the original path in here
    worked more by luck than design.
* invensense,mpu6050
  - Drop ACPI_PTR() protection to avoid an unused warning.
  - Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to
    simplify handling.
* motorola,cpcap-adc
  - Drop unused assignment.
* qcom,spmi-adc
  - Fix wrong example of 'reg' in binding document.
* renesas,rzg2l-adc
  - Trivial typo fix.
* semtech,sx9360
  - Fix wrong register handling for event generation.
* st_sensors
  - Allow manual disabling of I2C or SPI module if not needed for a particular
    board. Default is still to enable the bus specific module if
    appropriate bus is supported.
* st,lsm6dsx
  - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
    Use dev_to_iio_dev() instead.
* ti,palmas-gpadc
  - Split the interrupt fields in the dt-binding example
* ti,tsc2046
  - Rework state machine to improve readability after recent debugging of
    an issue fixed elsewhere.
  - Add a sanity check to avoid very large memory allocations if a crazy
    delay is specified.
* ti,twl6030
  - Add error handling if devm_request_threaded_irq() fails.
* xilinx,ams
  - Use devm_delayed_work_autocancel() instead of open coding equivalent.
  - Fix missing required clock entry in dt-binding.
  - Fix miss counting of channels resulting in ps channels not
    being enabled.
  - Fix incorrect values written to sequencer registers.
  - Fix sequence for single channel reading.

* tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits)
  iio: adc: xilinx-ams: Fix single channel switching sequence
  iio: adc: xilinx-ams: Fixed wrong sequencer register settings
  iio: adc: xilinx-ams: Fixed missing PS channels
  dt-bindings: iio: adc: zynqmp_ams: Add clock entry
  iio: accel: mma8452: use the correct logic to get mma8452_data
  iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
  iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct
  dt-bindings: iio: Add ltc2688 documentation
  iio: ABI: add ABI file for the LTC2688 DAC
  iio: dac: add support for ltc2688
  dt-bindings: iio: afe: add bindings for temperature transducers
  dt-bindings: iio: afe: add bindings for temperature-sense-rtd
  iio: afe: rescale: add temperature transducers
  iio: afe: rescale: add RTD temperature sensor support
  iio: test: add basic tests for the iio-rescale driver
  iio: afe: rescale: reduce risk of integer overflow
  iio: afe: rescale: fix accuracy for small fractional scales
  iio: afe: rescale: add offset support
  iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  iio: afe: rescale: expose scale processing function
  ...
2022-03-18 12:41:32 +01:00
Jonathan Cameron c9f384b87b iio:magn:mmc35240: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based config guards. Also use SIMPLE_DEV_PM_OPS instead
of open-coding the equivalent.

Removing instances of this approach from IIO also stops them being
copied into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-32-jic23@kernel.org
2022-02-18 11:45:30 +00:00
Jonathan Cameron fe7b9a3820 iio:magn:mag3110: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based config guards.

Removing instances of this approach from IIO also stops them being
copied into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-31-jic23@kernel.org
2022-02-18 11:45:30 +00:00