Граф коммитов

24 Коммитов

Автор SHA1 Сообщение Дата
Mike Travis fc8b13740b kgdb/kdb: Fix no KDB config problem
Some code added to the debug_core module had KDB dependencies
that it shouldn't have.  Move the KDB dependent REASON back to
the caller to remove the dependency in the debug core code.

Update the call from the UV NMI handler to conform to the new
interface.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20140114162551.318251993@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-25 08:55:09 +01:00
Mike Travis 8daaa5f826 kdb: Add support for external NMI handler to call KGDB/KDB
This patch adds a kgdb_nmicallin() interface that can be used by
external NMI handlers to call the KGDB/KDB handler.  The primary
need for this is for those types of NMI interrupts where all the
CPUs have already received the NMI signal.  Therefore no
send_IPI(NMI) is required, and in fact it will cause a 2nd
unhandled NMI to occur. This generates the "Dazed and Confuzed"
messages.

Since all the CPUs are getting the NMI at roughly the same time,
it's not guaranteed that the first CPU that hits the NMI handler
will manage to enter KGDB and set the dbg_master_lock before the
slaves start entering. The new argument "send_ready" was added
for KGDB to signal the NMI handler to release the slave CPUs for
entry into KGDB.

Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20131002151417.928886849@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-03 18:47:54 +02:00
Greg Kroah-Hartman 16559ae48c kgdb: remove #include <linux/serial_8250.h> from kgdb.h
There's no reason kgdb.h itself needs to include the 8250 serial port
header file.  So push it down to the _very_ limited number of individual
drivers that need the values in that file, and fix up the places where
people really wanted serial_core.h and platform_device.h.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-04 15:35:26 -08:00
Anton Vorontsov 0c57dfcc6c tty/serial: Add kgdb_nmi driver
This special driver makes it possible to temporary use NMI debugger port
as a normal console by issuing 'nmi_console' command (assuming that the
port is attached to KGDB).

Unlike KDB's disable_nmi command, with this driver you are always able
to go back to the debugger using KGDB escape sequence ($3#33).  This is
because this console driver processes the input in NMI context, and thus
is able to intercept the magic sequence.

Note that since the console interprets input and uses polling
communication methods, for things like PPP it is still better to fully
detach debugger port from the KGDB NMI (i.e. disable_nmi), and use raw
console.

Usually, to enter the debugger one have to type the magic sequence, so
initially the kernel will print the following prompt on the NMI debugger
console:

	Type $3#33 to enter the debugger>

For convenience, there is a kgdb_fiq.knock kernel command line option,
when set to 0, this turns the special command to just a return key
press, so the kernel will be printing this:

	Hit <return> to enter the debugger>

This is more convenient for long debugging sessions, although it makes
nmi_console feature somewhat useless.

And for the cases when NMI connected to a dedicated button, the knocking
can be disabled altogether by setting kgdb_fiq.knock to -1.

Suggested-by: Colin Cross <ccross@android.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Alan Cox <alan@linux.intel.com>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26 13:52:36 -07:00
Anton Vorontsov 5a14fead07 kernel/debug: Mask KGDB NMI upon entry
The new arch callback should manage NMIs that usually cause KGDB to
enter. That is, not all NMIs should be enabled/disabled, but only
those that issue kgdb_handle_exception().

We must mask it as serial-line interrupt can be used as an NMI, so
if the original KGDB-entry cause was say a breakpoint, then every
input to KDB console will cause KGDB to reenter, which we don't want.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26 13:42:25 -07:00
Jason Wessel 3751d3e85c x86,kgdb: Fix DEBUG_RODATA limitation using text_poke()
There has long been a limitation using software breakpoints with a
kernel compiled with CONFIG_DEBUG_RODATA going back to 2.6.26. For
this particular patch, it will apply cleanly and has been tested all
the way back to 2.6.36.

The kprobes code uses the text_poke() function which accommodates
writing a breakpoint into a read-only page.  The x86 kgdb code can
solve the problem similarly by overriding the default breakpoint
set/remove routines and using text_poke() directly.

The x86 kgdb code will first attempt to use the traditional
probe_kernel_write(), and next try using a the text_poke() function.
The break point install method is tracked such that the correct break
point removal routine will get called later on.

Cc: x86@kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: stable@vger.kernel.org # >= 2.6.36
Inspried-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-03-29 17:41:25 -05:00
Jason Wessel 98b54aa1a2 kgdb,debug_core: pass the breakpoint struct instead of address and memory
There is extra state information that needs to be exposed in the
kgdb_bpt structure for tracking how a breakpoint was installed.  The
debug_core only uses the the probe_kernel_write() to install
breakpoints, but this is not enough for all the archs.  Some arch such
as x86 need to use text_poke() in order to install a breakpoint into a
read only page.

Passing the kgdb_bpt structure to kgdb_arch_set_breakpoint() and
kgdb_arch_remove_breakpoint() allows other archs to set the type
variable which indicates how the breakpoint was installed.

Cc: stable@vger.kernel.org # >= 2.6.36
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-03-29 17:41:25 -05:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
David Howells d57f078b19 KGDB: Notify GDB of machine halt, reboot or power off
Notify GDB of the machine halting, rebooting or powering off by sending it an
exited command (remote protocol command 'W').  This is done by calling:

	void gdbstub_exit(int status)

from the arch's machine_{halt,restart,power_off}() functions with an
appropriate exit status to be reported to GDB.

Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-18 16:54:31 +00:00
Dongdong Deng d7ba979d45 debug_core,x86,blackfin: Clean up hw debug disable API
The kgdb_disable_hw_debug() was an architecture specific function for
disabling all hardware breakpoints on a per cpu basis when entering
the debug core.

This patch will remove the weak function kdbg_disable_hw_debug() and
change it into a call back which lives with the rest of hw breakpoint
call backs in struct kgdb_arch.

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-10-29 13:14:41 -05:00
Jason Wessel 55751145dc gdbstub: Implement gdbserial 'p' and 'P' packets
The gdbserial 'p' and 'P' packets allow gdb to individually get and
set registers instead of querying for all the available registers.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 09:22:21 -05:00
Jason Wessel 534af10823 kgdb,kdb: individual register set and and get API
The kdb shell specification includes the ability to get and set
architecture specific registers by name.

For the time being individual register get and set will be implemented
on a per architecture basis.  If an architecture defines
DBG_MAX_REG_NUM > 0 then kdb and the gdbstub will use the capability
for individually getting and setting architecture specific registers.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 09:22:20 -05:00
Jason Wessel 0b4b3827db x86, kgdb, init: Add early and late debug states
The kernel debugger can operate well before mm_init(), but the x86
hardware breakpoint code which uses the perf api requires that the
kernel allocators are initialized.

This means the kernel debug core needs to provide an optional arch
specific call back to allow the initialization functions to run after
the kernel has been further initialized.

The kdb shell already had a similar restriction with an early
initialization and late initialization.  The kdb_init() was moved into
the debug core's version of the late init which is called
dbg_late_init();

CC: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:29 -05:00
Jason Wessel efe2f29e32 kgdboc,kdb: Allow kdb to work on a non open console port
If kdb is open on a serial port that is not actually a console make
sure to call the poll routines to emit and receive characters.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Martin Hicks <mort@sgi.com>
2010-05-20 21:04:26 -05:00
Jason Wessel 1cee5e35f1 kgdb: Add the ability to schedule a breakpoint via a tasklet
Some kgdb I/O modules require the ability to create a breakpoint
tasklet, such as kgdboc and external modules such as kgdboe.  The
breakpoint tasklet is used as an asynchronous entry point into the
debugger which will have a different function scope than the current
execution path where it might not be safe to have an inline
breakpoint.  This is true of some of the kgdb I/O drivers which share
code with kgdb and rest of the kernel users.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:26 -05:00
Jason Wessel f503b5ae53 x86,kgdb: Add low level debug hook
The only way the debugger can handle a trap in inside rcu_lock,
notify_die, or atomic_notifier_call_chain without a triple fault is
to have a low level "first opportunity handler" in the int3 exception
handler.

Generally this will be something the vast majority of folks will not
need, but for those who need it, it is added as a kernel .config
option called KGDB_LOW_LEVEL_TRAP.

CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: H. Peter Anvin <hpa@zytor.com>
CC: x86@kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:25 -05:00
Jason Wessel 98ec1878ca kgdb: remove post_primary_code references
Remove all the references to the kgdb_post_primary_code.  This
function serves no useful purpose because you can obtain the same
information from the "struct kgdb_state *ks" from with in the
debugger, if for some reason you want the data.

Also remove the unintentional duplicate assignment for ks->ex_vector.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:25 -05:00
Jason Wessel 84c08fd61e kgdb,docs: Update the kgdb docs to include kdb
Update the kgdb docs to reflect the new directory structure and API.

Merge in the kdb shell information.

[Randy Dunlap <rdunlap@xenotime.net>: grammatical corrections]

CC: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:24 -05:00
Jason Wessel dcc7871128 kgdb: core changes to support kdb
These are the minimum changes to the kgdb core in order to enable an
API to connect a new front end (kdb) to the debug core.

This patch introduces the dbg_kdb_mode variable controls where the
user level I/O is routed.  It will be routed to the gdbstub (kgdb) or
to the kdb front end which is a simple shell available over the kgdboc
connection.

You can switch back and forth between kdb or the gdb stub mode of
operation dynamically.  From gdb stub mode you can blindly type
"$3#33", or from the kdb mode you can enter "kgdb" to switch to the
gdb stub.

The logic in the debug core depends on kdb to look for the typical gdb
connection sequences and return immediately with KGDB_PASS_EVENT if a
gdb serial command sequence is detected.  That should allow a
reasonably seamless transition between kdb -> gdb without leaving the
kernel exception state.  The two gdb serial queries that kdb is
responsible for detecting are the "?" and "qSupported" packets.

CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Martin Hicks <mort@sgi.com>
2010-05-20 21:04:21 -05:00
Jason Wessel 53197fc495 Separate the gdbstub from the debug core
Split the former kernel/kgdb.c into debug_core.c which contains the
kernel debugger exception logic and to the gdbstub.c which contains
the logic for allowing gdb to talk to the debug core.

This also created a private include file called debug_core.h which
contains all the definitions to glue the debug_core to any other
debugger connections.

CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:19 -05:00
Randy Dunlap b11e1eca7e kgdb: Fix kernel-doc format error in kgdb.h
linux-next-20081022//include/linux/kgdb.h:308): duplicate section name 'Description'

and fix typos in that file's kernel-doc comments.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-01-07 11:58:37 -06:00
Harvey Harrison 688b744d8b kgdb: fix signedness mixmatches, add statics, add declaration to header
Noticed by sparse:
arch/x86/kernel/kgdb.c:556:15: warning: symbol 'kgdb_arch_pc' was not declared. Should it be static?
kernel/kgdb.c:149:8: warning: symbol 'kgdb_do_roundup' was not declared. Should it be static?
kernel/kgdb.c:193:22: warning: symbol 'kgdb_arch_pc' was not declared. Should it be static?
kernel/kgdb.c:712:5: warning: symbol 'remove_all_break' was not declared. Should it be static?

Related to kgdb_hex2long:
arch/x86/kernel/kgdb.c:371:28: warning: incorrect type in argument 2 (different signedness)
arch/x86/kernel/kgdb.c:371:28:    expected long *long_val
arch/x86/kernel/kgdb.c:371:28:    got unsigned long *<noident>
kernel/kgdb.c:469:27: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:469:27:    expected long *long_val
kernel/kgdb.c:469:27:    got unsigned long *<noident>
kernel/kgdb.c:470:27: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:470:27:    expected long *long_val
kernel/kgdb.c:470:27:    got unsigned long *<noident>
kernel/kgdb.c:894:27: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:894:27:    expected long *long_val
kernel/kgdb.c:894:27:    got unsigned long *<noident>
kernel/kgdb.c:895:27: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:895:27:    expected long *long_val
kernel/kgdb.c:895:27:    got unsigned long *<noident>
kernel/kgdb.c:1127:28: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:1127:28:    expected long *long_val
kernel/kgdb.c:1127:28:    got unsigned long *<noident>
kernel/kgdb.c:1132:25: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:1132:25:    expected long *long_val
kernel/kgdb.c:1132:25:    got unsigned long *<noident>

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-05-05 07:13:21 -05:00
Jason Wessel e3e2aaf7dc kgdb: add documentation
Add in the kgdb documentation for kgdb.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 20:05:42 +02:00
Jason Wessel dc7d552705 kgdb: core
kgdb core code. Handles the protocol and the arch details.

[ mingo@elte.hu: heavily modified, simplified and cleaned up. ]
[ xemul@openvz.org: use find_task_by_pid_ns ]

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 20:05:37 +02:00