Граф коммитов

366 Коммитов

Автор SHA1 Сообщение Дата
Wang Sheng-Hui bb5c2de268 PCI: Fix INTC comment typo for pci_swizzle_interrupt_pin()
The INTx pin should be INIT[ABCD].  Fix the typo "3=INTC".

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-05-28 11:04:10 -06:00
Bjorn Helgaas 42c34707f9 Merge branch 'pci/rafael-pm' into next
* pci/rafael-pm:
  PCI/PM: Make pci_pme_active() ignore devices without PME support
  PCI/PM: Fix fallback to PCI_D0 in pci_platform_power_transition()
2013-04-17 10:43:16 -06:00
Rafael J. Wysocki ffaddbe8f9 PCI/PM: Make pci_pme_active() ignore devices without PME support
Make pci_pme_active() ignore devices without PME support, so that
it doesn't print the "PME enabled" or "PME disabled" debug messages
for devices that don't support PME.

So that pci_pme_active() doesn't have to check pm_cap in addition
to pme_support, make pci_pm_init() clear pme_support upfront to
make sure that it will be 0 for pm_cap equal to 0.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-15 14:15:44 -06:00
Rafael J. Wysocki 769ba7212f PCI/PM: Fix fallback to PCI_D0 in pci_platform_power_transition()
Commit b51306c (PCI: Set device power state to PCI_D0 for device
without native PM support) modified pci_platform_power_transition()
by adding code causing dev->current_state for devices that don't
support native PCI PM but are power-manageable by the platform to be
changed to PCI_D0 regardless of the value returned by the preceding
platform_pci_set_power_state().  In particular, that also is done
if the platform_pci_set_power_state() has been successful, which
causes the correct power state of the device set by
pci_update_current_state() in that case to be overwritten by PCI_D0.

Fix that mistake by making the fallback to PCI_D0 only happen if
the platform_pci_set_power_state() has returned an error.

[bhelgaas: folded in Yinghai's simplification, added URL & stable info]
Reference: http://lkml.kernel.org/r/27806FC4E5928A408B78E88BBC67A2306F466BBA@ORSMSX101.amr.corp.intel.com
Reported-by: Chris J. Benenati <chris.j.benenati@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: <stable@vger.kernel.org>	# v3.2+
2013-04-15 14:15:43 -06:00
Bjorn Helgaas 9738abedd6 PCI: Make local functions/structs static
This fixes "no previous prototype" warnings found via "make W=1".

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-12 11:26:01 -06:00
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Bjorn Helgaas 20f24208f6 Merge branch 'pci/konstantin-runtime-pm' into next
* pci/konstantin-runtime-pm:
  PCI/PM: Clear state_saved during suspend
  PCI: Use atomic_inc_return() rather than atomic_add_return()
  PCI: Catch attempts to disable already-disabled devices
  PCI: Disable Bus Master unconditionally in pci_device_shutdown()
2013-02-12 13:42:36 -07:00
Bjorn Helgaas cc7ba39bab PCI: Use atomic_inc_return() rather than atomic_add_return()
No functional change; just use atomic_inc_return() rather than the
general-purpose atomic_add_return().

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-11 17:25:06 -07:00
Konstantin Khlebnikov fd6dceab01 PCI: Catch attempts to disable already-disabled devices
Warn when disabling a device that has already been disabled.

[bhelgaas: message wording]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-11 17:25:04 -07:00
Bjorn Helgaas f2dfcde4cc Merge branch 'pci/misc' into next
* pci/misc:
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Kill pci_is_reassigndev()
2013-02-02 14:35:57 -07:00
Bjorn Helgaas 14b5cb37cc Merge branch 'pci/yijing-ari' into next
* pci/yijing-ari:
  PCI: shpchp: Iterate over all devices in slot, not functions 0-7
  PCI: sgihp: Iterate over all devices in slot, not functions 0-7
  PCI: cpcihp: Iterate over all devices in slot, not functions 0-7
  PCI: pciehp: Iterate over all devices in slot, not functions 0-7
  PCI: Consolidate "next-function" functions
  PCI: Rename pci_enable_ari() to pci_configure_ari()
  PCI: Enable ARI if dev and upstream bridge support it; disable otherwise
2013-01-26 17:27:36 -07:00
Yijing Wang 31ab247623 PCI: Rename pci_enable_ari() to pci_configure_ari()
pci_enable_ari() now supports enabling or disabling ARI forwarding.  So
rename pci_enable_ari() to pci_configure_ari() for easy understanding.

No functional change.

[bhelgaas: changelog]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-25 09:21:10 -07:00
Yinghai Lu 10c463a7a3 PCI: Kill pci_is_reassigndev()
pci_reassigndev_resource_alignment() is the only user of
pci_is_reassigndev().  If we just use pci_specified_resource_alignment()
directly, we only need to call it once instead of twice, and we can get
rid of pci_is_reassigndev() altogether.  No functional change.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-24 21:09:39 -07:00
Yijing Wang b0cc6020e1 PCI: Enable ARI if dev and upstream bridge support it; disable otherwise
Currently, we enable ARI in a device's upstream bridge if the bridge and
the device support it.  But we never disable ARI, even if the device is
removed and replaced with a device that doesn't support ARI.

This means that if we hot-remove an ARI device and replace it with a
non-ARI multi-function device, we find only function 0 of the new device
because the upstream bridge still has ARI enabled, and next_ari_fn()
only returns function 0 for the new non-ARI device.

This patch disables ARI in the upstream bridge if the device doesn't
support ARI.  See the PCIe spec, r3.0, sec 6.13.

[bhelgaas: changelog, function comment]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-24 11:42:14 -07:00
Bjorn Helgaas b7040469de Merge branch 'pci/yinghai-survey-resources+acpi-scan' into next
* pci/yinghai-survey-resources+acpi-scan:
  ACPI / scan: Treat power resources in a special way
  ACPI: Remove unused struct acpi_pci_root.id member
  ACPI: Drop ACPI device .bind() and .unbind() callbacks
  ACPI / PCI: Move the _PRT setup and cleanup code to pci-acpi.c
  ACPI / PCI: Rework the setup and cleanup of device wakeup
  ACPI: Add .setup() and .cleanup() callbacks to struct acpi_bus_type
  ACPI: Make acpi_bus_scan() and acpi_bus_add() take only one argument
  ACPI: Replace ACPI device add_type field with a match_driver flag
  ACPI: Drop the second argument of acpi_bus_scan()
  ACPI: Remove the arguments of acpi_bus_add() that are not used
  ACPI: Remove acpi_start_single_object() and acpi_bus_start()
  ACPI / PCI: Fold acpi_pci_root_start() into acpi_pci_root_add()
  ACPI: Change the ordering of acpi_bus_check_add()
  ACPI: Replace struct acpi_bus_ops with enum type
  ACPI: Reduce the usage of struct acpi_bus_ops
  ACPI: Make acpi_bus_add() and acpi_bus_start() visibly different
  ACPI: Change the ordering of PCI root bridge driver registrarion
  ACPI: Separate adding ACPI device objects from probing ACPI drivers
2013-01-10 11:19:22 -07:00
Bjorn Helgaas b4b4fbba46 PCI: Drop "__" prefix on __pci_enable_device_flags()
Drop the useless "__" prefix on __pci_enable_device_flags().

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-04 12:16:32 -07:00
Bjorn Helgaas f7ffe19a6f PCI: Use "unsigned long" for __pci_enable_device_flags to match ioport.h
__pci_enable_device_flags() takes values like IORESOURCE_IO and
IORESOURCE_MEM, which are values for struct resource.flags, which is
"unsigned long", not "resource_size_t".

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-04 12:13:15 -07:00
Rafael J. Wysocki d2e5f0c16a ACPI / PCI: Rework the setup and cleanup of device wakeup
Currently, the ACPI wakeup capability of PCI devices is set up
in two different places, partially in acpi_pci_bind() where
runtime wakeup is initialized and partially in
platform_pci_wakeup_init(), where system wakeup is initialized.
The cleanup is only done in acpi_pci_unbind() and it only covers
runtime wakeup.

Use the new .setup() and .cleanup() callbacks in struct acpi_bus_type
to consolidate that code and do the setup and the cleanup each in one
place.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-03 13:09:41 +01:00
Linus Torvalds 193c0d6825 PCI changes for the v3.8 merge window:
Host bridge hotplug:
     - Untangle _PRT from struct pci_bus (Bjorn Helgaas)
     - Request _OSC control before scanning root bus (Taku Izumi)
     - Assign resources when adding host bridge (Yinghai Lu)
     - Remove root bus when removing host bridge (Yinghai Lu)
     - Remove _PRT during hot remove (Yinghai Lu)
 
   SRIOV
     - Add sysfs knobs to control numVFs (Don Dutile)
 
   Power management
     - Notify devices when power resource turned on (Huang Ying)
 
   Bug fixes
     - Work around broken _SEG on HP xw9300 (Bjorn Helgaas)
     - Keep runtime PM enabled for unbound PCI devices (Huang Ying)
     - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie)
     - Fix xen frontend shutdown issue (David Vrabel)
     - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott)
 
   Miscellaneous
     - Add GPL license for drivers/pci/ioapic (Andrew Cooks)
     - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas)
     - NumaChip remote PCI support (Daniel Blueman)
     - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han)
     - Convert dev_printk() to dev_info(), etc (Joe Perches)
     - Add support for non PCI BAR ROM data (Matthew Garrett)
     - Add x86 support for host bridge translation offset (Mike Yoknis)
     - Report success only when every driver supports AER (Vijay Pandarathil)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQyKwSAAoJEPGMOI97Hn6zScgQAJZK2VDfCv74mKrgSDNokIzH
 5nVDrc9AHKJm7CUODs6keJK5d4TD/za3Zao68zrYHsJJKes2ni2Z3W34HP2RXKK2
 eOmePXOHYPPZMlimP9r9cVxNu1ZJCyp/yWSBcsPF4zUgWhBWLRaSj85I049gQ0sz
 +05nZYfLjVd3HNiaXsG4CQyMrNF46XEsLhF9vs+Nr2GHPwrpzhfScgYv63oDS86C
 3ICKsjmiRUZcNelxIFYmyxa5u89QdW5XHjzc9eHGQuus24Vxw+TZzsdfc17sUJEE
 HTyXY+RjDpOVhdtwwUjrCEOiyZYvy3g9+3sKxoxgt/76ghdUaR7fxITwB97qVMFD
 T0ESlKjSV/Qv5QYdyy5uP4zwNs/PXCWXkTg/L1m71F30BxKWDa7tgiA6uK7Z7fl5
 1aokKBdk3mtJJJIDJG1YkxPXx/JItTGCNYrx7CcFj49rSjrUWLQdmrYahersRIsB
 3wiD2xTi9e4dXeP/+VGzGOWB/sHk+73jvrvZe/REa1FCnMINDz4+9V9WaGROMqyq
 MQ8kX0KfYcNVNxy1GOXjU5wLpMN/t/QbvI7gwzRP1DAUCJPoOgFy7AjvSTVG3zuy
 8CtdOFttVkUn5dqsbQR0gVbyQVTS3PGSKz5XC/s8kVDWhja0xZTBYwrskM/4zdSD
 Xf48OyYV5EjpC3FYUSiU
 =OE3Q
 -----END PGP SIGNATURE-----

Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI update from Bjorn Helgaas:
 "Host bridge hotplug:
   - Untangle _PRT from struct pci_bus (Bjorn Helgaas)
   - Request _OSC control before scanning root bus (Taku Izumi)
   - Assign resources when adding host bridge (Yinghai Lu)
   - Remove root bus when removing host bridge (Yinghai Lu)
   - Remove _PRT during hot remove (Yinghai Lu)

  SRIOV
    - Add sysfs knobs to control numVFs (Don Dutile)

  Power management
   - Notify devices when power resource turned on (Huang Ying)

  Bug fixes
   - Work around broken _SEG on HP xw9300 (Bjorn Helgaas)
   - Keep runtime PM enabled for unbound PCI devices (Huang Ying)
   - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie)
   - Fix xen frontend shutdown issue (David Vrabel)
   - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott)

  Miscellaneous
   - Add GPL license for drivers/pci/ioapic (Andrew Cooks)
   - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas)
   - NumaChip remote PCI support (Daniel Blueman)
   - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo
     Han)
   - Convert dev_printk() to dev_info(), etc (Joe Perches)
   - Add support for non PCI BAR ROM data (Matthew Garrett)
   - Add x86 support for host bridge translation offset (Mike Yoknis)
   - Report success only when every driver supports AER (Vijay
     Pandarathil)"

Fix up trivial conflicts.

* tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
  PCI: Use phys_addr_t for physical ROM address
  x86/PCI: Add NumaChip remote PCI support
  ath9k: Use standard #defines for PCIe Capability ASPM fields
  iwlwifi: Use standard #defines for PCIe Capability ASPM fields
  iwlwifi: collapse wrapper for pcie_capability_read_word()
  iwlegacy: Use standard #defines for PCIe Capability ASPM fields
  iwlegacy: collapse wrapper for pcie_capability_read_word()
  cxgb3: Use standard #defines for PCIe Capability ASPM fields
  PCI: Add standard PCIe Capability Link ASPM field names
  PCI/portdrv: Use PCI Express Capability accessors
  PCI: Use standard PCIe Capability Link register field names
  x86: Use PCI setup data
  PCI: Add support for non-BAR ROMs
  PCI: Add pcibios_add_device
  EFI: Stash ROMs if they're not in the PCI BAR
  PCI: Add and use standard PCI-X Capability register names
  PCI/PM: Keep runtime PM enabled for unbound PCI devices
  xen-pcifront: Handle backend CLOSED without CLOSING
  PCI: SRIOV control and status via sysfs (documentation)
  PCI/AER: Report success only when every device has AER-aware driver
  ...
2012-12-13 12:14:47 -08:00
Bjorn Helgaas 72e1e868ca Merge branch 'pci/mjg-pci-roms-from-efi' into next
* pci/mjg-pci-roms-from-efi:
  x86: Use PCI setup data
  PCI: Add support for non-BAR ROMs
  PCI: Add pcibios_add_device
  EFI: Stash ROMs if they're not in the PCI BAR
2012-12-06 14:37:32 -07:00
Matthew Garrett eca0d4676d PCI: Add pcibios_add_device
Platforms may want to provide architecture-specific functionality during
PCI enumeration. Add a pcibios_add_device() call that architectures can
override to do so.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
2012-12-05 14:38:26 -07:00
Bjorn Helgaas edb1daab8e Merge branch 'pci/huang-d3cold-fixes' into next
* pci/huang-d3cold-fixes:
  PCI/PM: Keep runtime PM enabled for unbound PCI devices
2012-12-04 16:13:03 -07:00
Huang Ying 967577b062 PCI/PM: Keep runtime PM enabled for unbound PCI devices
For unbound PCI devices, what we need is:

 - Always in D0 state, because some devices do not work again after
   being put into D3 by the PCI bus.

 - In SUSPENDED state if allowed, so that the parent devices can still
   be put into low power state.

To satisfy these requirements, the runtime PM for the unbound PCI
devices are disabled and set to SUSPENDED state.  One issue of this
solution is that the PCI devices will be put into SUSPENDED state even
if the SUSPENDED state is forbidden via the sysfs interface
(.../power/control) of the device.  This is not an issue for most
devices, because most PCI devices are not used at all if unbound.
But there are exceptions.  For example, unbound VGA card can be used
for display, but suspending its parents makes it stop working.

To fix the issue, we keep the runtime PM enabled when the PCI devices
are unbound.  But the runtime PM callbacks will do nothing if the PCI
devices are unbound.  This way, we can put the PCI devices into
SUSPENDED state without putting the PCI devices into D3 state.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48201
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: stable@vger.kernel.org          # v3.6+
2012-12-04 16:04:09 -07:00
Bill Pemberton 15856ad50b PCI: Remove __dev* markings
CONFIG_HOTPLUG is going away as an option so __devexit_p, __devint,
__devinitdata, __devinitconst, and _devexit are no longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 13:16:47 -08:00
Bjorn Helgaas d3fe3988fb Merge branch 'for-linus' into next
* for-linus:
  PCI/portdrv: Don't create hotplug slots unless port supports hotplug
  PCI/PM: Fix proc config reg access for D3cold and bridge suspending
  PCI/PM: Resume device before shutdown
  PCI/PM: Fix deadlock when unbinding device if parent in D3cold
2012-11-26 13:00:57 -07:00
Bjorn Helgaas 0550827006 Merge branch 'pci/taku-prt-cleanup' into next
* pci/taku-prt-cleanup:
  PCI/ACPI: Request _OSC control before scanning PCI root bus
  PCI: Don't pass pci_dev to pci_ext_cfg_avail()
  PCI/ACPI: Add _PRT interrupt routing info before enumerating devices
  ACPI: Pass segment/bus to _PRT add/del so they don't depend on pci_bus
2012-11-09 10:00:07 -07:00
Huang Ying 6e965e0d0e PCI/PM: Add comments for PME poll support for PCIe
There are comments on why PME poll support is necessary for PCI
devices, but not for PCIe devices.  That may lead to misunderstanding
that PME poll is only necessary for PCI devices.  So add comments
related to PCIe PME poll to make it more clear.

The content of comments comes from the changelog of commit:

379021d5c0

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-07 15:24:19 -07:00
Taku Izumi 642c92da36 PCI: Don't pass pci_dev to pci_ext_cfg_avail()
pci_ext_cfg_avail() doesn't use the "struct pci_dev *" passed to
it, and there's no requirement that a host bridge even be represented
by a pci_dev.  This drops the pci_ext_cfg_avail() parameter.

[bhelgaas: changelog]
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-07 09:43:28 -07:00
Huang Ying b3c32c4f95 PCI/PM: Fix proc config reg access for D3cold and bridge suspending
In https://bugzilla.kernel.org/show_bug.cgi?id=48981
Peter reported that /proc/bus/pci/??/??.? does not work for 3.6.
This is because the device configuration space registers are
not accessible if the corresponding parent bridge is suspended or
the device is put into D3cold state.

This is the same as /sys/bus/pci/devices/0000:??:??.?/config access
issue.  So the function used to solve sysfs issue is used to solve
this issue.

This patch moves pci_config_pm_runtime_get()/_put() from pci/pci-sysfs.c
to pci/pci.c and makes them extern so they can be used by both the
sysfs and proc paths.

[bhelgaas: changelog, references, reporters]
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48981
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=49031
Reported-by: Forrest Loomis <cybercyst@gmail.com>
Reported-by: Peter <lekensteyn@gmail.com>
Reported-by: Micael Dias <kam1kaz3@gmail.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: stable@vger.kernel.org		# v3.6+
2012-11-05 10:46:23 -07:00
Bjorn Helgaas 6dabee73d4 Merge branch 'pci/trivial' into next
* pci/trivial:
  PCI: Drop duplicate const in DECLARE_PCI_FIXUP_SECTION
  PCI: Drop bogus default from ARCH_SUPPORTS_MSI
  PCI: cpqphp: Remove unreachable path
  PCI: Remove bus number resource debug messages
  PCI/AER: Print completion message at KERN_INFO to match starting message
  PCI: Fix drivers/pci/pci.c kernel-doc warnings
2012-09-13 09:08:02 -06:00
Bjorn Helgaas 78890b5989 Merge commit 'v3.6-rc5' into next
* commit 'v3.6-rc5': (1098 commits)
  Linux 3.6-rc5
  HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured
  Remove user-triggerable BUG from mpol_to_str
  xen/pciback: Fix proper FLR steps.
  uml: fix compile error in deliver_alarm()
  dj: memory scribble in logi_dj
  Fix order of arguments to compat_put_time[spec|val]
  xen: Use correct masking in xen_swiotlb_alloc_coherent.
  xen: fix logical error in tlb flushing
  xen/p2m: Fix one-off error in checking the P2M tree directory.
  powerpc: Don't use __put_user() in patch_instruction
  powerpc: Make sure IPI handlers see data written by IPI senders
  powerpc: Restore correct DSCR in context switch
  powerpc: Fix DSCR inheritance in copy_thread()
  powerpc: Keep thread.dscr and thread.dscr_inherit in sync
  powerpc: Update DSCR on all CPUs when writing sysfs dscr_default
  powerpc/powernv: Always go into nap mode when CPU is offline
  powerpc: Give hypervisor decrementer interrupts their own handler
  powerpc/vphn: Fix arch_update_cpu_topology() return value
  ARM: gemini: fix the gemini build
  ...

Conflicts:
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
	drivers/rapidio/devices/tsi721.c
2012-09-13 08:41:01 -06:00
Bjorn Helgaas a28afda8cc Merge branch 'pci/bjorn-find-next-ext-cap' into next
* pci/bjorn-find-next-ext-cap:
  PCI: Add Vendor-Specific Extended Capability header info
  PCI: Add pci_find_next_ext_capability()

Conflicts:
	drivers/pci/pci.c
2012-08-23 18:32:36 -06:00
Jiang Liu 59875ae489 PCI/core: Use PCI Express Capability accessors
Use PCI Express Capability access functions to simplify core.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-23 09:41:37 -06:00
Yijing Wang 62f87c0e31 PCI: Introduce pci_pcie_type(dev) to replace pci_dev->pcie_type
Introduce an inline function pci_pcie_type(dev) to extract PCIe
device type from pci_dev->pcie_flags_reg field, and prepare for
removing pci_dev->pcie_type.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-23 09:40:57 -06:00
Bjorn Helgaas 44a9a36f6b PCI: Add pci_find_next_ext_capability()
Some extended capabilities, e.g., the vendor-specific capability, can
occur several times.  The existing pci_find_ext_capability() only finds
the first occurrence.  This adds pci_find_next_ext_capability(), which
can iterate through all of them.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-22 13:47:27 -06:00
Randy Dunlap ceaf5b5f03 PCI: Fix drivers/pci/pci.c kernel-doc warnings
Fix kernel-doc warnings in drivers/pci/pci.c:

Warning(drivers/pci/pci.c:1550): No description found for parameter 'pci_dev'
Warning(drivers/pci/pci.c:1550): Excess function parameter 'dev' description in 'pci_wakeup'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-22 11:49:23 -06:00
Huang Ying 4f9c1397e2 PCI/PM: Enable D3/D3cold by default for most devices
This patch fixes the following bug:

http://marc.info/?l=linux-usb&m=134318961120825&w=2

Originally, device lower power states include D1, D2, D3.  After that,
D3 is further divided into D3hot and D3cold.  To support both scenario
safely, original D3 is mapped to D3cold.

When adding D3cold support, because worry about some device may have
broken D3cold support, D3cold is disabled by default.  This disable D3
on original platform too.  But some original platform may only have
working D3, but no working D1, D2.  The root cause of the above bug is
it too.

To deal with this, this patch enables D3/D3cold by default for most
devices.  This restores the original behavior.  For some devices that
suspected to have broken D3cold support, such as PCIe port, D3cold is
disabled by default.

Reported-by: Bjorn Mork <bjorn@mork.no>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-08-21 17:31:40 -06:00
Bjorn Helgaas a7711ba109 Merge branch 'pci/rafael-pci_set_power_state-rebase' into next
* pci/rafael-pci_set_power_state-rebase:
  PCI / PM: restore the original behavior of pci_set_power_state()
2012-07-05 16:29:52 -06:00
Bjorn Helgaas 85a00dd391 Merge branch 'pci/myron-pcibios_setup' into next
* pci/myron-pcibios_setup:
  xtensa/PCI: factor out pcibios_setup()
  x86/PCI: adjust section annotations for pcibios_setup()
  unicore32/PCI: adjust section annotations for pcibios_setup()
  tile/PCI: factor out pcibios_setup()
  sparc/PCI: factor out pcibios_setup()
  sh/PCI: adjust section annotations for pcibios_setup()
  sh/PCI: factor out pcibios_setup()
  powerpc/PCI: factor out pcibios_setup()
  parisc/PCI: factor out pcibios_setup()
  MIPS/PCI: adjust section annotations for pcibios_setup()
  MIPS/PCI: factor out pcibios_setup()
  microblaze/PCI: factor out pcibios_setup()
  ia64/PCI: factor out pcibios_setup()
  cris/PCI: factor out pcibios_setup()
  alpha/PCI: factor out pcibios_setup()
  PCI: pull pcibios_setup() up into core
2012-07-05 15:31:05 -06:00
Rafael J. Wysocki db288c9c5f PCI / PM: restore the original behavior of pci_set_power_state()
Commit cc2893b6 (PCI: Ensure we re-enable devices on resume)
addressed the problem with USB not being powered after resume on
recent Lenovo machines, but it did that in a suboptimal way.
Namely, it should have changed the relevant code paths only,
which are pci_pm_resume_noirq() and pci_pm_restore_noirq() supposed
to restore the device's power and standard configuration registers
after system resume from suspend or hibernation.  Instead, however,
it modified pci_set_power_state() which is executed in several
other situations too.  That resulted in some undesirable effects,
like attempting to change a device's power state in the same way
multiple times in a row (up to as many as 4 times in a row in the
snd_hda_intel driver).

Fix the bug addressed by commit cc2893b6 in an alternative way,
by forcibly powering up all devices in pci_pm_default_resume_early(),
which is called by pci_pm_resume_noirq() and pci_pm_restore_noirq()
to restore the device's power and standard configuration registers,
and modifying pci_pm_runtime_resume() to avoid the forcible power-up
if not necessary.  Then, revert the changes made by commit cc2893b6
to make the confusion introduced by it go away.

Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-05 15:20:00 -06:00
Myron Stowe 2b6f2c3520 PCI: pull pcibios_setup() up into core
Currently, all of the architectures implement their own pcibios_setup()
routine.  Most of the implementations do nothing so this patch introduces
a generic (__weak) routine in the core that can be used by all
architectures as a default.  If necessary, it can be overridden by
architecture-specific code.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-26 06:22:31 -06:00
Bjorn Helgaas 35e7f73c32 Merge branch 'topic/huang-d3cold-v7' into next
* topic/huang-d3cold-v7:
  PCI/PM: add PCIe runtime D3cold support
  PCI: do not call pci_set_power_state with PCI_D3cold
  PCI/PM: add runtime PM support to PCIe port
  ACPI/PM: specify lowest allowed state for device sleep state
2012-06-23 11:59:43 -06:00
Huang Ying 448bd857d4 PCI/PM: add PCIe runtime D3cold support
This patch adds runtime D3cold support and corresponding ACPI platform
support.  This patch only enables runtime D3cold support; it does not
enable D3cold support during system suspend/hibernate.

D3cold is the deepest power saving state for a PCIe device, where its main
power is removed.  While it is in D3cold, you can't access the device at
all, not even its configuration space (which is still accessible in D3hot).
Therefore the PCI PM registers can not be used to transition into/out of
the D3cold state; that must be done by platform logic such as ACPI _PR3.

To support wakeup from D3cold, a system may provide auxiliary power, which
allows a device to request wakeup using a Beacon or the sideband WAKE#
signal.  WAKE# is usually connected to platform logic such as ACPI GPE.
This is quite different from other power saving states, where devices
request wakeup via a PME message on the PCIe link.

Some devices, such as those in plug-in slots, have no direct platform
logic.  For example, there is usually no ACPI _PR3 for them.  D3cold
support for these devices can be done via the PCIe Downstream Port leading
to the device.  When the PCIe port is powered on/off, the device is powered
on/off too.  Wakeup events from the device will be notified to the
corresponding PCIe port.

For more information about PCIe D3cold and corresponding ACPI support,
please refer to:

- PCI Express Base Specification Revision 2.0
- Advanced Configuration and Power Interface Specification Revision 5.0

[bhelgaas: changelog]
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
Originally-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-23 10:50:59 -06:00
Zheng Yan 71a83bd727 PCI/PM: add runtime PM support to PCIe port
This patch adds runtime PM support to PCIe port.  This is needed by
PCIe D3cold support, where PCIe device without ACPI node may be
powered on/off by PCIe port.

Because runtime suspend is broken for some chipsets, a black list is
used to disable runtime PM support for these chipsets.

Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-23 10:47:47 -06:00
Bjorn Helgaas 0f6662a49b Merge branch 'topic/bjorn-trivial' into next
* topic/bjorn-trivial:
  PCI: remove useless pcix_set_mmrbc() dev->bus check
  PCI: acpiphp: check whether _ADR evaluation succeeded
  PCI: shpchp: remove dead code
  PCI: fix P2P bridge I/O port window sign extension
  PCI: fix upstream P2P bridge checks when enabling OBFF and LTR
  PCI: use __weak consistently
  PCI: cleanup assign_requested_resources_sorted() kernel-doc warning
  sparc/PCI: remove unused pcibios_assign_resource() definition
2012-06-22 15:32:50 -06:00
Bjorn Helgaas 809a3bf9f3 PCI: remove useless pcix_set_mmrbc() dev->bus check
For a valid pci_dev, dev->bus != NULL always, so remove this
unnecessary test.

Found by Coverity (CID 101680).

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-20 17:28:53 -06:00
Bjorn Helgaas 8291550f84 PCI: fix upstream P2P bridge checks when enabling OBFF and LTR
pci_enable_obff() and pci_enable_ltr() incorrectly check "dev->bus" instead
of "dev->bus->self" to determine whether the upstream device is a P2P
bridge or a host bridge.  For devices on the root bus, the upstream device
is a host bridge, "dev->bus != NULL" and "dev->bus->self == NULL", and we
panic with a null pointer dereference.

These functions should previously have panicked when called on devices
supporting OBFF or LTR, so they should be regarded as untested.

Found by Coverity (CID 143038 and CID 143039).

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-20 17:28:53 -06:00
Bjorn Helgaas d6d88c832e PCI: use __weak consistently
Use "__weak" instead of the gcc-specific "__attribute__ ((weak))"

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-20 10:44:35 -06:00
Bjorn Helgaas 140217ae3f Merge branch 'topic/jan-intx-masking' into next
* topic/jan-intx-masking:
  PCI: add Ralink RT2800 broken INTx masking quirk
  PCI: add Chelsio T310 10GbE NIC broken INTx masking quirk
  PCI: add infrastructure for devices with broken INTx masking
2012-06-18 12:14:16 -06:00
Bjorn Helgaas 47fcb6da65 Merge branch 'topic/stowe-cap-cleanup' into next
* topic/stowe-cap-cleanup:
  PCI: remove redundant capabilities checking in pci_{save, restore}_pcie_state
  PCI: add pci_pcie_cap2() check for PCIe feature capabilities >= v2
  PCI: remove redundant checking in PCI Express capability routines
  PCI: make pci_ltr_supported() static
2012-06-18 12:10:39 -06:00