The original --reltime patch forbid --time with --reltime.
But it turns out --time doesn't really care about --reltime, because the
relative time is only used at final output, while the time filtering
always works earlier on absolute time.
So just remove the check and allow combining the two options.
Fixes: 90b10f47c0 ("perf script: Support relative time")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191002164642.1719-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the LBR data and the instructions in a binary do not match the loop
printing instructions could get confused and print a long stream of
bogus <bad> instructions.
The problem was that if the instruction decoder cannot decode an
instruction it ilen wasn't initialized, so the loop going through the
basic block would continue with the previous value.
Harden the code to avoid such problems:
- Make sure ilen is always freshly initialized and is 0 for bad
instructions.
- Do not overrun the code buffer while printing instructions
- Print a warning message if the final jump is not on an instruction
boundary.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already had evsel_fprintf.c, add its counterpart, so that we can
reduce evsel.h a bit more.
We needed a new perf_event_attr_fprintf.c file so as to have a separate
object to link with the python binding in tools/perf/util/python-ext-sources
and not drag symbol_conf, etc into the python binding.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-06bdmt1062d9unzgqmxwlv88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we an later link it to the python binding without having to
drag the symbol object files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8823tveyasocnuoelq4qopwf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evlist__first()/last() functions to libperf, as internal
functions and rename perf's origins to evlist__first/last.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-29-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the 'system_wide 'member from perf's evsel to libperf's perf_evsel.
Committer notes:
Added stdbool.h as we now use bool here.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to return error code of perf_new_session function on
failure instead of NULL.
Test Results:
Before Fix:
$ perf c2c report -input
failed to open nput: No such file or directory
$ echo $?
0
$
After Fix:
$ perf c2c report -input
failed to open nput: No such file or directory
$ echo $?
254
$
Committer notes:
Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(...,
session), i.e. we need to pass zero in case of failure, which was the
case before when NULL was returned by perf_session__new() for failure,
but now we need to negate the result of IS_ERR(session) to respect that
TEST_ASSERT_VAL) expectation of zero meaning failure.
Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the last unneeded use of cache.h in a header, we can check where
it is really needed, i.e. we can remove it and be sure that it isn't
being obtained indirectly.
This is an old file, used by now incorrectly in many places, so it was
providing includes needed indirectly, fixup this fallout.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3x3l8gihoaeh7714os861ia7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reduce the header dependency tree further, in the process
noticed that lots of places were getting even things like build-id
routines and 'struct perf_tool' definition indirectly, so fix all those
too.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ti0btma9ow5ndrytyoqdk62j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its not needed there, add it to the places that need it and were getting
it via those headers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5yulx1u16vyd0zmrbg1tjhju@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even more, to have a "perf_record_" prefix, so that they match the
PERF_RECORD_ enum they map to.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is no need for that util/util.h include there and, remove it,
pruning the include tree, fix the fallout by adding necessary headers to
places that were getting needed includes indirectly from evlist.h ->
util.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-s9f7uve8wvykr5itcm7m7d8q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need for that _event suffix, do just like all the other meta event
handlers and suppress that suffix.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lkml.kernel.org/n/tip-03spzxtqafbabbbmnm7y4xfx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When srcline was introduced it wrongly added the include to util/sort.h,
even with that header not needing the definitions it provides, fix it by
adding it to the places that need it as a pre patch to remove srcline.h
from sort.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-shuebppedtye8hrgxk15qe3x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And into a separate util/record.h, to better isolate things and make
sure that those who use record_opts and the other moved declarations
are explicitly including the necessary header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-31q8mei1qkh74qvkl9nwidfq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it's part of libperf library as basic functions operating on
perf_thread_map objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190822111141.25823-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is getting this via evsel.h, that don't strictly need counts.h, just
forward declarations for some structs, so add it here before we remove
it from there.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-q4shpvlxyjqz7val1hyrdak9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Another step in having all the boilerplate in just one place to then use
in the other tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-snreb1wmwyjei3eefwotxp1l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All tools will want those, so provide a convenient way to get them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-v16pe3sbf3wjmn152u18f649@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can have macros for the OPT_ entries and also for finding
those in an evlist, this way other tools will use this very easily.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-q0og1xoqqi0w38ve5u0a43k2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now other tools that want switching can use an evswitch for that, just
set it up and add it to the PERF_RECORD_SAMPLE processing function.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-b1trj1q97qwfv251l66q3noj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we see that the simple userspace-based "slicing" of events
using delimiter events ("markers") works, lets move it to a separate
header to make it available to other tools, next step will be having
the switch on/off check done at the PERF_RECORD_SAMPLE processing
function moved too.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-z0cyi9ifzlr37cedr9xztc1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the nr_members member from perf's evsel to libperf's perf_evsel.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-60-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the evlist__set_maps() function from tools/perf to libperf.
Committer notes:
Fix up reject due to earlier inversion in calling perf_evlist__init().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-57-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mov the 'cpus' field from tools/perf's evsel to libperf's perf_evsel.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-51-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'.
Committer notes:
Fixed up these:
tools/perf/arch/arm/util/auxtrace.c
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/arm-spe.c
tools/perf/arch/s390/util/auxtrace.c
tools/perf/util/cs-etm.c
Also
cc1: warnings being treated as errors
tests/sample-parsing.c: In function 'do_test':
tests/sample-parsing.c:162: error: missing initializer
tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus')
struct evsel evsel = {
.needs_swap = false,
- .core.attr = {
- .sample_type = sample_type,
- .read_format = read_format,
+ .core = {
+ . attr = {
+ .sample_type = sample_type,
+ .read_format = read_format,
+ },
[perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1
gcc (GCC) 4.4.7
Also we don't need to include perf_event.h in
tools/perf/lib/include/perf/evsel.h, forward declaring 'struct
perf_event_attr' is enough. And this even fixes the build in some
systems where things are used somewhere down the include path from
perf_event.h without defining __always_inline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evlist to struct evlist, so we don't have a name
clash when we add struct perf_evlist in libperf.
Committer notes:
Added fixes to build on arm64, from Jiri and from me
(tools/perf/util/cs-etm.c)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct thread_map to struct perf_thread_map, so it could be part
of libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct cpu_map to struct perf_cpu_map, so it could be part of
libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add scripting operation process_switch() to process switch events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190710085810.1650-18-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In pipe mode, session->header.env.arch is not populated until the events
are processed. Therefore, the following command crashes:
perf record -o - | perf script
(gdb) bt
It fails when we try to compare env.arch against uts.machine:
if (!strcmp(uts.machine, session->header.env.arch) ||
(!strcmp(uts.machine, "x86_64") &&
!strcmp(session->header.env.arch, "i386")))
native_arch = true;
In pipe mode, it is tricky to find env.arch at this stage. To keep it
simple, let's just assume native_arch is always true for pipe mode.
Reported-by: David Carrillo Cisneros <davidca@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org #v5.1+
Fixes: 3ab481a1cf ("perf script: Support insn output for normal samples")
Link: http://lkml.kernel.org/r/20190621014438.810342-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf kvm' command set up things so that we can record, report, top,
etc, but not 'script', so make 'perf script' be able to process samples
by allowing to pass guest kallsyms, vmlinux, modules, etc, and if at
least one of those is provided, set perf_guest to true so that guest
samples get properly resolved.
Testing it:
# perf kvm --guest --guestkallsyms /wb/rhel6.kallsyms --guestmodules /wb/rhel6.modules record -e cycles:Gk
^C[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 3.602 MB perf.data.guest (10492 samples) ]
#
# perf evlist -i perf.data.guest
cycles:Gk
# perf evlist -v -i perf.data.guest
cycles:Gk: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, exclude_user: 1, exclude_hv: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_host: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
#
# perf kvm --guestkallsyms /wb/rhel6.kallsyms --guestmodules /wb/rhel6.modules report --stdio -s sym | head -30
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 10K of event 'cycles:Gk'
# Event count (approx.): 2434201408
#
# Overhead Symbol
# ........ ..............................................
#
11.93% [g] avtab_search_node
3.95% [g] sidtab_context_to_sid
2.41% [g] n_tty_write
2.20% [g] _spin_unlock_irqrestore
1.37% [g] _aesni_dec4
1.33% [g] kmem_cache_alloc
1.07% [g] native_write_cr0
0.99% [g] kfree
0.95% [g] _spin_lock
0.91% [g] __memset
0.87% [g] schedule
0.83% [g] _spin_lock_irqsave
0.76% [g] __kmalloc
0.67% [g] avc_has_perm_noaudit
0.66% [g] kmem_cache_free
0.65% [g] glue_xts_crypt_128bit
0.59% [g] __d_lookup
0.59% [g] __audit_syscall_exit
0.56% [g] __memcpy
#
Then, when trying to use perf script to generate a python script and
then process the events after adding a python hook for non-tracepoint
events:
# perf script -i perf.data.guest -g python
generated Python script: perf-script.py
# vim perf-script.py
# tail -2 perf-script.py
def process_event(param_dict):
print(param_dict["symbol"])
#
# perf script -i perf.data.guest -s perf-script.py | head
in trace_begin
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
231
#
We'd see just the vmx_vmexit, i.e. the samples from the guest don't show
up.
After this patch:
# perf script --guestkallsyms /wb/rhel6.kallsyms --guestmodules /wb/rhel6.modules -i perf.data.guest -s perf-script.py 2> /dev/null | head -30
in trace_begin
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
save_args
do_timer
drain_array
inode_permission
avc_has_perm_noaudit
run_timer_softirq
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
kvm_guest_apic_eoi_write
run_posix_cpu_timers
_spin_lock
handle_pte_fault
rcu_irq_enter
delay_tsc
delay_tsc
native_read_tsc
apic_timer_interrupt
sys_open
internal_add_timer
list_del
rcu_exit_nohz
#
Jiri Olsa noticed we need to set 'perf_guest' to true if we want to
process guest samples and I made it be set if one of the guest files
settings get set via the command line options added in this patch, that
match those present in the 'perf kvm' command.
We probably want to have 'perf record', 'perf report' etc to notice that
there are guest samples and do the right thing, which is to look for
files with some suffix that make it be associated with the guest used to
collect the samples, i.e. if a vmlinux file is passed, we can get the
build-id from it, if not some other identifier or simply looking for
"kallsyms.guest", for instance, in the current directory.
Reported-by: Mariano Pache <npache@redhat.com>
Tested-by: Mariano Pache <npache@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Ali Raza <alirazabhutta.10@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Orran Krieger <okrieger@redhat.com>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: https://lkml.kernel.org/n/tip-d54gj64rerlxcqsrod05biwn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No change in behaviour, just using the same kernel idiom for such
operation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-a85lkptkt0ru40irpga8yf54@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got the sane_ctype.h headers from git and kept using it so far, but
since that code originally came from the kernel sources to the git
sources, perhaps its better to just use the one in the kernel, so that
we can leverage tools/perf/check_headers.sh to be notified when our copy
gets out of sync, i.e. when fixes or goodies are added to the code we've
copied.
This will help with things like tools/lib/string.c where we want to have
more things in common with the kernel, such as strim(), skip_spaces(),
etc so as to go on removing the things that we have in tools/perf/util/
and instead using the code in the kernel, indirectly and removing things
like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements
are made to the original code.
Hopefully this also should help with reducing the difference of code
hosted in tools/ to the one in the kernel proper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction trace decoders can optimize output based on what time
intervals will be filtered, so pass that information in
itrace_synth_ops.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add field 'ipc' to display instructions-per-cycle.
Example:
perf record -e intel_pt/cyc/u ls
perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
ls 2670177.697113434: 7f0dfdbcd090 _start+0x0 mov %rsp, %rdi IPC: 0.00 (1/877)
ls 2670177.697113434: 7f0dfdbcd093 _start+0x3 callq 0x7f0dfdbce030
ls 2670177.697113434: 7f0dfdbce030 _dl_start+0x0 pushq %rbp
ls 2670177.697113434: 7f0dfdbce031 _dl_start+0x1 mov %rsp, %rbp
ls 2670177.697113434: 7f0dfdbce034 _dl_start+0x4 pushq %r15
ls 2670177.697113434: 7f0dfdbce036 _dl_start+0x6 pushq %r14
ls 2670177.697113434: 7f0dfdbce038 _dl_start+0x8 pushq %r13
ls 2670177.697113434: 7f0dfdbce03a _dl_start+0xa pushq %r12
ls 2670177.697113434: 7f0dfdbce03c _dl_start+0xc mov %rdi, %r12
ls 2670177.697113434: 7f0dfdbce03f _dl_start+0xf pushq %rbx
ls 2670177.697113434: 7f0dfdbce040 _dl_start+0x10 sub $0x38, %rsp
ls 2670177.697113434: 7f0dfdbce044 _dl_start+0x14 rdtsc
ls 2670177.697113434: 7f0dfdbce046 _dl_start+0x16 mov %eax, %eax
ls 2670177.697113434: 7f0dfdbce048 _dl_start+0x18 shl $0x20, %rdx
ls 2670177.697113434: 7f0dfdbce04c _dl_start+0x1c or %rax, %rdx
ls 2670177.697114471: 7f0dfdbce04f _dl_start+0x1f movq 0x27e22(%rip), %rax IPC: 0.00 (15/1685)
ls 2670177.697116177: 7f0dfdbce056 _dl_start+0x26 movq %rdx, 0x27683(%rip) IPC: 0.00 (1/881)
Note, the IPC values are low due to page faults at the beginning of
execution. The additional cycles are due to the time to enter the
kernel, not the actual kernel page fault handler.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the --show-bpf-events command line option to show the eBPF related events:
PERF_RECORD_KSYMBOL
PERF_RECORD_BPF_EVENT
Usage:
# perf record -a
...
# perf script --show-bpf-events
...
swapper 0 [000] 0.000000: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0ef971d len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
swapper 0 [000] 0.000000: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 36
...
Committer testing:
# perf script --show-bpf-events | egrep -i 'PERF_RECORD_(BPF|KSY)'
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc029a6c3 len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 47
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc029c1ae len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 48
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc02ddd1c len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 49
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc02dfc11 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 50
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc045da0a len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 51
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc04ef4b4 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 52
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc09e15da len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 53
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0d2b1a3 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 54
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0fd9850 len 381 type 1 flags 0x0 name bpf_prog_819967866022f1e1_sys_enter
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 179
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0feb1ec len 191 type 1 flags 0x0 name bpf_prog_c1bd85c092d6e4aa_sys_exit
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 180
^C[root@quaco pt]# perf evlist
intel_pt//ku
dummy:u
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When comparing time stamps in 'perf script' traces it can be annoying to
work with the full perf time stamps.
Add a --reltime option that displays time stamps relative to the trace
start to make it easier to read the traces.
Note: not currently supported for --time. Report an error in this
case.
Before:
% perf script
swapper 0 [000] 245402.891216: 1 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms])
swapper 0 [000] 245402.891223: 1 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms])
swapper 0 [000] 245402.891227: 5 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms])
swapper 0 [000] 245402.891231: 41 cycles:ppp: ffffffffa0068816 native_write_msr+0x6 ([kernel.kallsyms])
swapper 0 [000] 245402.891235: 355 cycles:ppp: ffffffffa000dd51 intel_bts_enable_local+0x21 ([kernel.kallsyms])
swapper 0 [000] 245402.891239: 3084 cycles:ppp: ffffffffa0a0150a end_repeat_nmi+0x48 ([kernel.kallsyms])
After:
% perf script --reltime
swapper 0 [000] 0.000000: 1 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms])
swapper 0 [000] 0.000006: 1 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms])
swapper 0 [000] 0.000010: 5 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms])
swapper 0 [000] 0.000014: 41 cycles:ppp: ffffffffa0068816 native_write_msr+0x6 ([kernel.kallsyms])
swapper 0 [000] 0.000018: 355 cycles:ppp: ffffffffa000dd51 intel_bts_enable_local+0x21 ([kernel.kallsyms])
swapper 0 [000] 0.000022: 3084 cycles:ppp: ffffffffa0a0150a end_repeat_nmi+0x48 ([kernel.kallsyms])
Committer notes:
Do not use 'time' as the name of a variable, as this breaks the build on
older glibcs:
cc1: warnings being treated as errors
builtin-script.c: In function 'perf_sample__fprintf_start':
builtin-script.c:691: warning: declaration of 'time' shadows a global declaration
/usr/include/time.h:187: warning: shadowed declaration is here
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-8-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-bpahyi6pr9r399mvihu65fvc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't overflow array when the scripts directory is too large, or the
script file name is too long.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190311144502.15423-11-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --cpu option only filtered samples. Filter other perf events, such
as COMM, FORK, SWITCH by the CPU too.
Reported-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190311144502.15423-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Upcoming changes add timestamp output in perf report. Add a --ns
argument similar to perf script to support nanoseconds resolution when
needed.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20190305144758.12397-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen
Arnaldo Carvalho de Melo
Jiri Olsa
Mamatha Inamdar
Adrian Hunter
Song Liu