Граф коммитов

32 Коммитов

Автор SHA1 Сообщение Дата
Eric Biggers 2c95e6d978 crypto: skcipher - remove useless setting of type flags
Some skcipher algorithms set .cra_flags = CRYPTO_ALG_TYPE_SKCIPHER.  But
this is redundant with the C structure type ('struct skcipher_alg'), and
crypto_register_skcipher() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the skcipher algorithms.

This patch shouldn't change any actual behavior.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09 00:30:27 +08:00
Eric Biggers c87a405e3b crypto: ahash - remove useless setting of cra_type
Some ahash algorithms set .cra_type = &crypto_ahash_type.  But this is
redundant with the C structure type ('struct ahash_alg'), and
crypto_register_ahash() already sets the .cra_type automatically.
Apparently the useless assignment has just been copy+pasted around.

So, remove the useless assignment from all the ahash algorithms.

This patch shouldn't change any actual behavior.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09 00:30:26 +08:00
Eric Biggers 6a38f62245 crypto: ahash - remove useless setting of type flags
Many ahash algorithms set .cra_flags = CRYPTO_ALG_TYPE_AHASH.  But this
is redundant with the C structure type ('struct ahash_alg'), and
crypto_register_ahash() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the ahash algorithms.

This patch shouldn't change any actual behavior.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09 00:30:25 +08:00
Peter Robinson 7c73cf4cc2 crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ss
The MODULE_ALIAS is required to enable the sun4i-ss driver to load
automatically when built at a module. Tested on a Cubietruck.

Fixes: 6298e94821 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-22 22:16:15 +08:00
Artem Savkov 2e7d1d61ea crypto: sun4i_ss_prng - convert lock to _bh in sun4i_ss_prng_generate
Lockdep detects a possible deadlock in sun4i_ss_prng_generate() and
throws an "inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage" warning.
Disabling softirqs to fix this.

Fixes: b8ae5c7387 ("crypto: sun4i-ss - support the Security System PRNG")
Signed-off-by: Artem Savkov <artem.savkov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-08 22:38:14 +11:00
Artem Savkov dd78c832ff crypto: sun4i_ss_prng - fix return value of sun4i_ss_prng_generate
According to crypto/rng.h generate function should return 0 on success
and < 0 on error.

Fixes: b8ae5c7387 ("crypto: sun4i-ss - support the Security System PRNG")
Signed-off-by: Artem Savkov <artem.savkov@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-08 22:38:13 +11:00
Corentin LABBE b8ae5c7387 crypto: sun4i-ss - support the Security System PRNG
The Security System has a PRNG, this patch adds support for it via
crypto_rng.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18 17:50:55 +08:00
Antoine Ténart 049655499e crypto: sun4i-ss - fix large block size support
The run-time self-tests fail quite early, as soon as the input block
size is larger than 64 bytes:

  alg: hash: Test 4 failed for sha1-sun4i-ss
  00000000: b9 c9 1e 52 c0 26 d8 39 81 ff f2 3c 99 b1 27 b2
  00000010: 30 d6 c9 85

One thing to notice is the value of the last word, which is the one
expected (it can sometime be the last two words). The datasheet isn't
very clear about when the digest is ready to retrieve and is seems the
bit SS_DATA_END is cleared when the digest was computed *but* that
doesn't mean the digest is ready to retrieve in the registers.

A ndelay(1) is added before reading the computed digest to ensure it is
available in the SS_MD[] registers.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19 14:19:52 +08:00
Antoine Ténart 0d9c68a9bf crypto: sun4i-ss - add the CRYPTO_ALG_KERN_DRIVER_ONLY flag
The CRYPTO_ALG_KERN_DRIVER_ONLY flag is set for hardware accelerated
ciphers accessible through a kernel driver only. This is the case for
ciphers exposed by the sun4i-ss driver. This patch sets this flag.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19 14:19:51 +08:00
Antoine Ténart 317cbacf72 crypto: sun4i-ss - move from ablkcipher to skcipher API
Update the sun4i-ss driver to use the skcipher API instead of the old
ablkcipher one. It's a bit more tricky than s/ablkcipher/skcipher/, but
still nothing special and the driver's logic stays the same.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19 14:19:51 +08:00
Antoine Ténart d78867a94e crypto: sun4i-ss - use GENMASK to generate masks
Use the GENMASK helper instead of custom calculations to generate masks,
It also helps the readability.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19 14:19:51 +08:00
Antoine Ténart 303391d69b crypto: sun4i-ss - simplify the appended bit assignment
A bit is appended at the end of the input buffer for sha1. Simplify the
code assigning it.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19 14:19:51 +08:00
Antoine Ténart 214a9bd0f8 crypto: sun4i-ss - simplify the pad length calculation
When sending the last block of data to the engine, it should be padded
so that the total length of the request can be given to the engine as
the last 2 words of the last 64 bytes block.

Simplify the calculation of this pad offset.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19 14:19:50 +08:00
Antoine Ténart 7e6df1f7a3 crypto: sun4i-ss - do not dynamically set parts of the last buffer to 0
Parts of the bf buffer were dynamically set to 0. Change this to set the
whole buffer to 0 by default to avoid any mistake.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19 14:19:50 +08:00
Antoine Ténart 0f52ddaed6 crypto: sun4i-ss - cannot use DMA is the request is 0 length
Do not use DMA is the request is 0 length.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19 14:19:50 +08:00
Antoine Ténart 11be0107ab crypto: sun4i-ss - use lower/upper_32_bits helpers
Replace custom bit shifts and masks with lower/upper_32_bits helpers.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19 14:19:49 +08:00
Antoine Ténart a595e60a70 crypto: sun4i-ss - remove conditional checks against 0
Cosmetic clean up if conditional checks on 0s values.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19 14:19:49 +08:00
Antoine Ténart e3f9490e89 crypto: sun4i-ss - group variable definitions in sun4i_hash()
Cosmetic change to avoid having a full screen a variable definitions. It
also helps to see which variables share the same type.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19 14:19:48 +08:00
Baoyou Xie 8d46a5c872 crypto: sun4i-ss - mark sun4i_hash() static
We get 1 warning when building kernel with W=1:
drivers/crypto/sunxi-ss/sun4i-ss-hash.c:168:5: warning: no previous prototype for 'sun4i_hash' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
So this patch marks it 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-09-22 18:32:48 +08:00
Wei Yongjun b46b9d1aad crypto: sun4i-ss - fix missing unlock on error in sun4i_hash()
Add the missing unlock before return from function sun4i_hash()
in the error handling case.

Fixes: 477d9b2e59 ("crypto: sun4i-ss - unify update/final function")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-24 21:04:49 +08:00
Corentin LABBE b6ff2fdd42 crypto: sun4i-ss - fix indentation of two crypto alg
Two crypto alg are badly indented, this patch fix this style issue.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16 17:17:02 +08:00
Corentin LABBE 9b17e5ad78 crypto: sun4i-ss - Always use sun4i_tfm_ctx for storing pointer to dev ss
The dev *ss is stored both in sun4i_tfm_ctx and sun4i_req_ctx.
Since this pointer will never be changed during tfm life, it is better
to remove it from sun4i_req_ctx.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16 17:17:00 +08:00
Corentin LABBE 933e7e3ab2 crypto: sun4i-ss - fix spelling
Two words are badly spelled, this patch respell them.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16 17:16:59 +08:00
Corentin LABBE d98a949bb8 crypto: sun4i-ss - clean unused ss
The ss variable is never used, remove it.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16 17:16:57 +08:00
Corentin LABBE 477d9b2e59 crypto: sun4i-ss - unify update/final function
The update and final functions have lots of common action.
This patch mix them in one function.
This will give some improvements:
- This will permit asynchronous support more easily
- This will permit to use finup/digest functions with some performance
  improvements

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16 17:16:56 +08:00
Corentin LABBE ea1a674143 crypto: sun4i-ss - fix a few signed warning
The variable i is always checked against unsigned value and cannot be
negative.
This patch set it as unsigned.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16 17:16:54 +08:00
Corentin LABBE bdb6cf9f6f crypto: sun4i-ss - Replace spinlock_bh by spin_lock_irq{save|restore}
The current sun4i-ss driver could generate data corruption when ciphering/deciphering.
It occurs randomly on end of handled data.
No root cause have been found and the only way to remove it is to replace
all spin_lock_bh by their irq counterparts.

Fixes: 6298e94821 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05 20:35:53 +08:00
Arnd Bergmann bfb2892018 crypto: sunxi - don't print confusing data
gcc correctly warns that the printk output contains a variable that
it thinks is not initialized in some cases:

drivers/crypto/sunxi-ss/sun4i-ss-cipher.c: In function 'sun4i_ss_cipher_poll':
drivers/crypto/sunxi-ss/sun4i-ss-cipher.c:254:76: warning: 'todo' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/crypto/sunxi-ss/sun4i-ss-cipher.c:144:15: note: 'todo' was declared here

A closer look at the function reveals that the variable is always
initialized at this point (ileft is guaranteed to be positive at the
start), but its contents are not well-defined:
Depending on some other variables, it might be either a count in
words or bytes, and it could refer to either input or output.

The easiest solution apparently is to remove the confusing output
and let the reader figure out the state from the other variables.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-27 20:36:26 +08:00
LABBE Corentin 4f9ea86604 crypto: sun4i-ss - add missing statesize
sun4i-ss implementaton of md5/sha1 is via ahash algorithms.
Commit 8996eafdcb ("crypto: ahash - ensure statesize is non-zero")
made impossible to load them without giving statesize. This patch
specifiy statesize for sha1 and md5.

Fixes: 6298e94821 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Cc: <stable@vger.kernel.org> # v4.3+
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-11-17 22:00:42 +08:00
LABBE Corentin 9da75de030 crypto: sunxi-ss - Fix a possible driver hang with ciphers
The sun4i_ss_opti_poll function cipher data until the output miter have
a length of 0.
If the crypto API client, give more SGs than necessary this could result
in an infinite loop.
Fix it by checking for remaining bytes, just like sun4i_ss_cipher_poll().

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-10 17:22:55 +08:00
Chen-Yu Tsai 7ab64628bb crypto: sunxi-ss - Add optional reset control support
On sun6i and later platforms, the reset control is split out of the
clock gates. Add support for an optional reset control.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-13 15:13:23 +08:00
LABBE Corentin 6298e94821 crypto: sunxi-ss - Add Allwinner Security System crypto accelerator
Add support for the Security System included in Allwinner SoC A20.
The Security System is a hardware cryptographic accelerator that support:
- MD5 and SHA1 hash algorithms
- AES block cipher in CBC/ECB mode with 128/196/256bits keys.
- DES and 3DES block cipher in CBC/ECB mode

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-20 15:54:08 +08:00