Граф коммитов

27 Коммитов

Автор SHA1 Сообщение Дата
Fang Wenqi 6d3b82f2d3 ext4: Update documentation to correct the inode_readahead_blks option name
Per commit 240799cd, the option name for readahead should be
inode_readahead_blks, not inode_readahead.

Signed-off-by: Fang Wenqi <antonf@turbolinux.com.cn>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-24 17:51:42 -05:00
Eric Sandeen e3bb52ae2b ext4: make "norecovery" an alias for "noload"
Users on the linux-ext4 list recently complained about differences
across filesystems w.r.t. how to mount without a journal replay.

In the discussion it was noted that xfs's "norecovery" option is
perhaps more descriptively accurate than "noload," so let's make
that an alias for ext4.

Also show this status in /proc/mounts

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-11-19 14:28:50 -05:00
Eric Sandeen 5328e63531 ext4: make trim/discard optional (and off by default)
It is anticipated that when sb_issue_discard starts doing
real work on trim-capable devices, we may see issues.  Make
this mount-time optional, and default it to off until we know
that things are working out OK.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-11-19 14:25:42 -05:00
Linus Torvalds d4da6c9ccf Revert "ext4: Remove journal_checksum mount option and enable it by default"
This reverts commit d0646f7b63, as
requested by Eric Sandeen.

It can basically cause an ext4 filesystem to miss recovery (and thus get
mounted with errors) if the journal checksum does not match.

Quoth Eric:

   "My hand-wavy hunch about what is happening is that we're finding a
    bad checksum on the last partially-written transaction, which is
    not surprising, but if we have a wrapped log and we're doing the
    initial scan for head/tail, and we abort scanning on that bad
    checksum, then we are essentially running an unrecovered filesystem.

    But that's hand-wavy and I need to go look at the code.

    We lived without journal checksums on by default until now, and at
    this point they're doing more harm than good, so we should revert
    the default-changing commit until we can fix it and do some good
    power-fail testing with the fixes in place."

See

	http://bugzilla.kernel.org/show_bug.cgi?id=14354

for all the gory details.

Requested-by: Eric Sandeen <sandeen@redhat.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Alexey Fisher <bug-track@fisher-privat.net>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mathias Burén <mathias.buren@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-02 10:15:27 -08:00
Jan Kara 8365388827 ext4: Update documentation about quota mount options
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-29 15:59:34 -04:00
Jan Kara 1358870dea ext4: Update documentation about quota mount options
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-18 12:22:29 -04:00
Theodore Ts'o d0646f7b63 ext4: Remove journal_checksum mount option and enable it by default
There's no real cost for the journal checksum feature, and we should
make sure it is enabled all the time.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-05 12:50:43 -04:00
Theodore Ts'o 8a8a2050c8 ext4: document the "abort" mount option
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-13 10:08:59 -04:00
Matt LaPlante 19f5946001 trivial: Miscellaneous documentation typo fixes
Fix various typos in documentation txts.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:47 +02:00
Theodore Ts'o 06705bff91 ext4: Regularize mount options
Add support for using the mount options "barrier" and "nobarrier", and
"auto_da_alloc" and "noauto_da_alloc", which is more consistent than
"barrier=<0|1>" or "auto_da_alloc=<0|1>".  Most other ext3/ext4 mount
options use the foo/nofoo naming convention.  We allow the old forms
of these mount options for backwards compatibility.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-03-28 10:59:57 -04:00
Theodore Ts'o 722bde6875 ext4: Add fine print for the 32000 subdirectory limit
Some poeple are reading the ext4 feature list too literally and create
dubious test cases involving very long filenames and 1k blocksize and
then complain when they run into an htree-imposed limit.  So add fine
print to the "fix 32000 subdirectory limit" ext4 feature.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-02-23 00:51:57 -05:00
Theodore Ts'o 83982b6f47 ext4: Remove "extents" mount option
This mount option is largely superfluous, and in fact the way it was
implemented was buggy; if a filesystem which did not have the extents
feature flag was mounted -o extents, the filesystem would attempt to
create and use extents-based file even though the extents feature flag
was not eabled.  The simplest thing to do is to nuke the mount option
entirely.  It's not all that useful to force the non-creation of new
extent-based files if the filesystem can support it.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-06 14:53:16 -05:00
Theodore Ts'o b3881f74b3 ext4: Add mount option to set kjournald's I/O priority
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jens Axboe <jens.axboe@oracle.com>
2009-01-05 22:46:26 -05:00
Theodore Ts'o c319106723 ext4: Remove code to create the journal inode
This code has been obsolete in quite some time, since the supported
method for adding a journal inode is to use tune2fs (or to creating
new filesystem with a journal via mke2fs or mkfs.ext4).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-06 11:14:25 -05:00
Theodore Ts'o 30773840c1 ext4: add fsync batch tuning knobs
Add new mount options, min_batch_time and max_batch_time, which
controls how long the jbd2 layer should wait for additional filesystem
operations to get batched with a synchronous write transaction.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-03 20:27:38 -05:00
Theodore Ts'o 8e1a4857cd Update Documentation/filesystems/ext4.txt
Fix paragraph with recommendations on how to tune ext4 for benchmarks.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-06 14:53:06 -05:00
Diego Calleja 22359f5745 ext4: Update Documentation/filesystems/ext4.txt
Since Ext4 is supposed to be stable in 2.6.28-rc, ext4's documentation
file should be updated.

[ More updates also added by Theodore Ts'o. ]

Signed-off-by: Diego Calleja <diegocg@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-17 09:15:14 -04:00
Hidehiro Kawai 5bf5683a33 ext4: add an option to control error handling on file data
If the journal doesn't abort when it gets an IO error in file data
blocks, the file data corruption will spread silently.  Because
most of applications and commands do buffered writes without fsync(),
they don't notice the IO error.  It's scary for mission critical
systems.  On the other hand, if the journal aborts whenever it gets
an IO error in file data blocks, the system will easily become
inoperable.  So this patch introduces a filesystem option to
determine whether it aborts the journal or just call printk() when
it gets an IO error in file data.

If you mount an ext4 fs with data_err=abort option, it aborts on file
data write error.  If you mount it with data_err=ignore, it doesn't
abort, just call printk().  data_err=ignore is the default.

Here is the corresponding patch of the ext3 version:
http://kerneltrap.org/mailarchive/linux-kernel/2008/9/9/3239374

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-10 22:12:43 -04:00
Theodore Ts'o 03010a3350 ext4: Rename ext4dev to ext4
The ext4 filesystem is getting stable enough that it's time to drop
the "dev" prefix.  Also remove the requirement for the TEST_FILESYS
flag.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10 20:02:48 -04:00
Theodore Ts'o 240799cdf2 ext4: Use readahead when reading an inode from the inode table
With modern hard drives, reading 64k takes roughly the same time as
reading a 4k block.  So request readahead for adjacent inode table
blocks to reduce the time it takes when iterating over directories
(especially when doing this in htree sort order) in a cold cache case.
With this patch, the time it takes to run "git status" on a kernel
tree after flushing the caches via "echo 3 > /proc/sys/vm/drop_caches"
is reduced by 21%.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-09 23:53:47 -04:00
Theodore Ts'o 4537398d91 ext4: Update documentation to remind users to update mke2fs.conf
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-27 19:59:21 -04:00
Mingming Cao 49f1487b2e ext4: Documention update for new ordered mode and delayed allocation
Adding some documentations for delayed allocation and new ordered mode.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Jose R. Santos 93e3270c87 ext4: Documentation updates.
Some of the information in Documentation/filesystems/ext4.txt is out
of date and in need of an update.

Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Eric Sandeen 571640cad3 ext4: enable barriers by default
I can't think of any valid reason for ext4 to not use barriers when
they are available;  I believe this is necessary for filesystem
integrity in the face of a volatile write cache on storage.

An administrator who trusts that the cache is sufficiently battery-
backed (and power supplies are sufficiently redundant, etc...)
can always turn it back off again.

SuSE has carried such a patch for ext3 for quite some time now.

Also document the mount option while we're at it.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-26 12:29:46 -04:00
Alex Tomas c9de560ded ext4: Add multi block allocator for ext4
Signed-off-by: Alex Tomas <alex@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-29 00:19:52 -05:00
Girish Shilamkar 818d276ceb ext4: Add the journal checksum feature
The journal checksum feature adds two new flags i.e
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT and JBD2_FEATURE_COMPAT_CHECKSUM.

JBD2_FEATURE_CHECKSUM flag indicates that the commit block contains the
checksum for the blocks described by the descriptor blocks.
Due to checksums, writing of the commit record no longer needs to be
synchronous. Now commit record can be sent to disk without waiting for
descriptor blocks to be written to disk. This behavior is controlled
using JBD2_FEATURE_ASYNC_COMMIT flag. Older kernels/e2fsck should not be
able to recover the journal with _ASYNC_COMMIT hence it is made
incompat.
The commit header has been extended to hold the checksum along with the
type of the checksum.

For recovery in pass scan checksums are verified to ensure the sanity
and completeness(in case of _ASYNC_COMMIT) of every transaction.

Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Girish Shilamkar <girish@clusterfs.com>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28 23:58:27 -05:00
Dave Kleikamp fc513a333b [PATCH] Documentation/filesystems/ext4.txt
This file, ext4.txt, was put together with information from Andrew Morton,
Andreas Dilger, Suparna Bhattacharya, and Ted Ts'o.

I copied the mount options, with the exception of "extents", from ext3.txt,
so if anyone is aware of anything out-of-date, please let me know.

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Suparna Bhattacharya <suparna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:19 -07:00