Граф коммитов

497 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 75d6e7d9ce Nothing changed in the clk framework core this time around. We did get
some updates to the basic clk types to use determine_rate for the
 divider type and add a power of two fractional divider flag though.
 Otherwise, this is a collection of clk driver updates. More than half
 the diffstat is in the Qualcomm clk driver where we add a bunch of data
 to describe clks on various SoCs and fix bugs. The other big new thing
 in here is the Mediatek MT8192 clk driver. That's been under review for
 a while and it's nice to see that it's finally upstream.
 
 Beyond that it's the usual set of minor fixes and tweaks to clk drivers.
 There are some non-clk driver bits in here which have all been acked by
 the respective maintainers.
 
 New Drivers:
  - Support video, gpu, display clks on qcom sc7280 SoCs
  - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
  - Multimedia clks (MMCC) on qcom MSM8994/MSM8992
  - RPMh clks on qcom SM6350 SoCs
  - Support for Mediatek MT8192 SoCs
  - Add display (DU and DSI) clocks on Renesas R-Car V3U
  - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
    resets on Renesas RZ/G2L
 
 Updates:
  - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
  - Add power of two flag to fractional divider clk type
  - Migrate some clk drivers to clk_divider_ops.determine_rate
  - Migrate to clk_parent_data in gcc-sdm660
  - Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2
  - Switch from .round_rate to .determine_rate in clk-divider-gate
  - Fix clock tree update for TF-A controlled clocks for all i.MX8M
  - Add missing M7 core clock for i.MX8MN
  - YAML conversion of rk3399 clock controller binding
  - Removal of GRF dependency for the rk3328/rk3036 pll types
  - Drop CLK_IS_CRITICAL flag from Tegra fuse clk
  - Make CLK_R9A06G032 Kconfig symbol invisible
  - Convert various DT bindings to YAML
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmExEooRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSXXBhAAvhHm4fcm3fRjNdfImd+jDEl8XSvg+w43
 adSnmVxbYM6ZVNOiJ4CJWHbj0hOY/PJnsQYWbV0xXvXW+zXva6p495MMHHOGSi2o
 lMgZVMvj5UAwu304ZC9Xfn31dwo8XdGrltp4JqIcI2NEBMh1/PlZW22esT+jDiWN
 3SWFD3M7lu88xTREyiEu11FY3z/KiGzbGlqYcbivx1X0sHVnBRbl4qcqZway+BmQ
 95Ma4YWwhvDGYc+ypKH2EPxs/LikHXj05nMooigy65DOQ5wrM4L1eWkwmVUf6h+e
 t4x7sAVysLnkihzdH5r2pw6CcAIom76v8w0+maSfk+jINUu1LeGVuat1eXSesFTu
 49o+uTKRghkUe/Qh6r+7lbo8AZXQq+wUsLTYRuaWT/mSb+svAtJaUWAru8tJnMlH
 oK6OehcQwz4nGhH0HnBK1jCVdtgckxPBw8F/GYN9rYhsccIe0XmFjX1rzMM3s8De
 PLl6QO7Xzd+xb/FwAU8+S1WpKFdPU6ILTUnI2Ma3Mn/gfjZEZHvWAdTjo4oZGEsw
 +N4n924ArptbeSLRrlNUtqx4BVDL5yo54xS5gefNpmD5yezO7aoUtN0aGcBq+01p
 Qw0N5hKtcdsNYLBEFSvBGcZZmErMZbPwMXHWiUwNymXBDzJKgj5d+ks+1vJ3iCNW
 R5r9hvATJPQ=
 =Rrqg
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "Nothing changed in the clk framework core this time around. We did get
  some updates to the basic clk types to use determine_rate for the
  divider type and add a power of two fractional divider flag though.

  Otherwise, this is a collection of clk driver updates. More than half
  the diffstat is in the Qualcomm clk driver where we add a bunch of
  data to describe clks on various SoCs and fix bugs. The other big new
  thing in here is the Mediatek MT8192 clk driver. That's been under
  review for a while and it's nice to see that it's finally upstream.

  Beyond that it's the usual set of minor fixes and tweaks to clk
  drivers. There are some non-clk driver bits in here which have all
  been acked by the respective maintainers.

  New Drivers:
   - Support video, gpu, display clks on qcom sc7280 SoCs
   - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
   - Multimedia clks (MMCC) on qcom MSM8994/MSM8992
   - RPMh clks on qcom SM6350 SoCs
   - Support for Mediatek MT8192 SoCs
   - Add display (DU and DSI) clocks on Renesas R-Car V3U
   - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
     resets on Renesas RZ/G2L

  Updates:
   - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
   - Add power of two flag to fractional divider clk type
   - Migrate some clk drivers to clk_divider_ops.determine_rate
   - Migrate to clk_parent_data in gcc-sdm660
   - Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2
   - Switch from .round_rate to .determine_rate in clk-divider-gate
   - Fix clock tree update for TF-A controlled clocks for all i.MX8M
   - Add missing M7 core clock for i.MX8MN
   - YAML conversion of rk3399 clock controller binding
   - Removal of GRF dependency for the rk3328/rk3036 pll types
   - Drop CLK_IS_CRITICAL flag from Tegra fuse clk
   - Make CLK_R9A06G032 Kconfig symbol invisible
   - Convert various DT bindings to YAML"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits)
  dt-bindings: clock: samsung: fix header path in example
  clk: tegra: fix old-style declaration
  clk: qcom: Add SM6350 GCC driver
  MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry
  dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema
  dt-bindings: clock: samsung: convert Exynos AudSS to dtschema
  dt-bindings: clock: samsung: convert Exynos4 to dtschema
  dt-bindings: clock: samsung: convert Exynos3250 to dtschema
  dt-bindings: clock: samsung: convert Exynos542x to dtschema
  dt-bindings: clock: samsung: add bindings for Exynos external clock
  dt-bindings: clock: samsung: convert Exynos5250 to dtschema
  clk: vc5: Add properties for configuring SD/OE behavior
  clk: vc5: Use dev_err_probe
  dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
  dt-bindings: clock: brcm,iproc-clocks: fix armpll properties
  clk: zynqmp: Fix kernel-doc format
  clk: at91: clk-generated: Limit the requested rate to our range
  clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
  clk: zynqmp: Fix a memory leak
  clk: zynqmp: Check the return type
  ...
2021-09-02 14:17:24 -07:00
Arnd Bergmann 27115441b9 clk: tegra: fix old-style declaration
With extra warnings enabled, gcc complains about a slightly odd
prototype:

drivers/clk/tegra/clk-dfll.c:1380:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration]
 1380 | static void inline dfll_debug_init(struct tegra_dfll *td) { }

Move the 'inline' keyword to the start of the line.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210322215047.1062540-1-arnd@kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-29 11:38:11 -07:00
Dmitry Osipenko faa8605f9f clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock
FUSE driver now takes care of keeping the clock enabled when necessary.
Remove the CLK_IS_CRITICAL flag from the clock.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-11 11:57:01 +02:00
Dmitry Osipenko 2bcc025ab9 clk: tegra: Implement disable_unused() of tegra_clk_sdmmc_mux_ops
Implement disable_unused() callback of tegra_clk_sdmmc_mux_ops to fix
imbalanced disabling of the unused MMC clock on Tegra210 Jetson Nano.

Fixes: c592c8a28f ("clk: tegra: Fix refcounting of gate clocks")
Reported-by: Jon Hunter <jonathanh@nvidia.com> # T210 Nano
Tested-by: Jon Hunter <jonathanh@nvidia.com> # T210 Nano
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210717112742.7196-1-digetx@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-07-27 14:54:19 -07:00
Alexandru Ardelean 2f0d67bf4c clk: tegra: clk-tegra124-dfll-fcpu: don't use devm functions for regulator
The purpose of the device-managed functions is to bind the life-time of an
object to that of a parent device object.

This is not the case for the 'vdd-cpu' regulator in this driver. A
reference is obtained via devm_regulator_get() and immediately released
with devm_regulator_put().

In this case, the usage of devm_ functions is slightly excessive, as the
un-managed versions of these functions is a little cleaner (and slightly
more economical in terms of allocation).

This change converts the devm_regulator_{get,put}() to
regulator_{get,put}() in the get_alignment_from_regulator() function of
this driver.

Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210624084737.42336-1-aardelean@deviqon.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-25 16:23:07 -07:00
Yang Yingliang f13570e7e8 clk: tegra: tegra124-emc: Fix clock imbalance in emc_set_timing()
After calling clk_prepare_enable(), clk_disable_unprepare() needs
be called when prepare_timing_change() failed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-02 11:08:00 +02:00
Dmitry Osipenko 4782c0a5dd clk: tegra: Don't deassert reset on enabling clocks
The Tegra clock driver contains legacy code which deasserts hardware reset
when peripheral clocks are enabled. This behaviour comes from a pre-CCF
era of the Tegra drivers. This is unacceptable for modern kernel drivers
which use generic CCF and reset-control APIs because it breaks assumptions
of the drivers about clk/reset sequences and about reset-propagation
delays. Hence remove the awkward legacy behaviour from the clk driver.

In particular PMC driver assumes that hardware blocks remains in reset
while power domain is turning on, but the clk driver deasserts the reset
before power clamp is removed, hence breaking the driver's assumption.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31 15:16:46 +02:00
Dmitry Osipenko 5d0f1c8ab1 clk: tegra: Mark external clocks as not having reset control
The external clocks don't have reset bits as they don't belong to any
specific hardware unit. Mark them as not having reset control for
consistency.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31 15:16:46 +02:00
Dmitry Osipenko 344d5df34f clk: tegra: cclk: Handle thermal DIV2 CPU frequency throttling
Check whether thermal DIV2 throttle is active in order to report
the CPU frequency properly. This very useful for userspace tools
like cpufreq-info which show actual frequency asserted from hardware.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31 15:16:26 +02:00
Dmitry Osipenko 78086386b3 clk: tegra: Don't allow zero clock rate for PLLs
Zero clock rate doesn't make sense for PLLs and tegra-clk driver enters
into infinite loop on trying to calculate PLL parameters for zero rate.
Make code to error out if requested rate is zero.

Originally this trouble was found by Robert Yang while he was trying to
bring up upstream kernel on Samsung Galaxy Tab, which happened due to a
bug in Tegra DRM driver that erroneously sets PLL rate to zero. This
issues came over again recently during of kernel bring up on ASUS TF700T.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31 15:16:26 +02:00
Dmitry Osipenko 18a6a7150a clk: tegra: Halve SCLK rate on Tegra20
Higher SCLK rates on Tegra20 require high core voltage. The higher
clock rate may have a positive performance effect only for AHB DMA
transfers and AVP CPU, but both aren't used by upstream kernel at all.
Halve SCLK rate on Tegra20 in order to remove the high core voltage
requirement.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31 15:16:25 +02:00
Dmitry Osipenko a7196048cd clk: tegra: Ensure that PLLU configuration is applied properly
The PLLU (USB) consists of the PLL configuration itself and configuration
of the PLLU outputs. The PLLU programming is inconsistent on T30 vs T114,
where T114 immediately bails out if PLLU is enabled and T30 re-enables
a potentially already enabled PLL (left after bootloader) and then fully
reprograms it, which could be unsafe to do. The correct way should be to
skip enabling of the PLL if it's already enabled and then apply
configuration to the outputs. This patch doesn't fix any known problems,
it's a minor improvement.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31 15:16:25 +02:00
Dmitry Osipenko c592c8a28f clk: tegra: Fix refcounting of gate clocks
The refcounting of the gate clocks has a bug causing the enable_refcnt
to underflow when unused clocks are disabled. This happens because clk
provider erroneously bumps the refcount if clock is enabled at a boot
time, which it shouldn't be doing, and it does this only for the gate
clocks, while peripheral clocks are using the same gate ops and the
peripheral clocks are missing the initial bump. Hence the refcount of
the peripheral clocks is 0 when unused clocks are disabled and then the
counter is decremented further by the gate ops, causing the integer
underflow.

Fix this problem by removing the erroneous bump and by implementing the
disable_unused() callback, which disables the unused gates properly.

The visible effect of the bug is such that the unused clocks are never
gated if a loaded kernel module grabs the unused clocks and starts to use
them. In practice this shouldn't cause any real problems for the drivers
and boards supported by the kernel today.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31 15:16:24 +02:00
Dmitry Osipenko 56bb7c28ad clk: tegra30: Use 300MHz for video decoder by default
The 600MHz is a too high clock rate for some SoC versions for the video
decoder hardware and this may cause stability issues. Use 300MHz for the
video decoder by default, which is supported by all hardware versions.

Fixes: ed1a2459e2 ("clk: tegra: Add Tegra20/30 EMC clock implementation")
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-05-31 15:16:23 +02:00
JC Kuo 0c7ea2b1c8 clk: tegra: Don't enable PLLE HW sequencer at init
PLLE hardware power sequencer references PEX/SATA UPHY PLL hardware
power sequencers' output to enable/disable PLLE. PLLE hardware power
sequencer has to be enabled only after PEX/SATA UPHY PLL's sequencers
are enabled.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-24 14:02:14 +01:00
JC Kuo 54443ef6f5 clk: tegra: Add PLLE HW power sequencer control
PLLE has a hardware power sequencer logic which is a state machine
that can power on/off PLLE without any software intervention. The
sequencer has two inputs, one from XUSB UPHY PLL and the other from
SATA UPHY PLL. PLLE provides reference clock to XUSB and SATA UPHY
PLLs. When both of the downstream PLLs are powered-off, PLLE hardware
power sequencer will automatically power off PLLE for power saving.

XUSB and SATA UPHY PLLs also have their own hardware power sequencer
logic. XUSB UPHY PLL is shared between XUSB SuperSpeed ports and PCIE
controllers. The XUSB UPHY PLL hardware power sequencer has inputs
from XUSB and PCIE. When all of the XUSB SuperSpeed ports and PCIE
controllers are in low power state, XUSB UPHY PLL hardware power
sequencer automatically power off PLL and flags idle to PLLE hardware
power sequencer. Similar applies to SATA UPHY PLL.

PLLE hardware power sequencer has to be enabled after both downstream
sequencers are enabled.

This commit adds two helper functions:
1. tegra210_plle_hw_sequence_start() for XUSB PADCTL driver to enable
   PLLE hardware sequencer at proper time.

2. tegra210_plle_hw_sequence_is_enabled() for XUSB PADCTL driver to
   check whether PLLE hardware sequencer has been enabled or not.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-24 14:01:58 +01:00
Linus Torvalds 28b9aaac4c This is all driver updates, the majority of which is a bunch of new Qualcomm
clk drivers that dominate the diffstat because we add support for six SoCs from
 that particular vendor. The other big change is the removal of various clk
 drivers that are no longer used now that the kernel is dropping support for
 those SoCs. Beyond that there's the usual non-critical fixes for existing
 drivers and a good number of patches from Lee Jones that cleanup a bunch of W=1
 enabled builds.
 
 Removed Drivers:
  - Remove efm32 clk driver
  - Remove tango4 clk driver
  - Remove zte zx clk driver
  - Remove sirf prima2/atlast clk drivers
  - Remove u300 clk driver
 
 New Drivers:
  - PLL support on MStar/SigmaStar ARMv7 SoCs
  - CPU clks for Qualcomm SDX55
  - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
  - GCC clks for Qualcomm SM8350
  - GPU clks for Qualcomm SDM660/SDM630
 
 Updates:
  - Video clk fixups on Qualcomm SM8250
  - Improvements for multimedia clks on Qualcomm MSM8998
  - Fix many warnings with W=1 enabled builds under drivers/clk/
  - Support crystal load capacitance for Versaclock VC5
  - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid glitches at boot
  - Convert Xilinx VCU clk driver to a proper clk provider driver
  - Expose Xilinx ZynqMP clk driver to more platforms
  - Amlogic pll driver fixup
  - Amlogic meson8b clock controller dt support clean up
  - Remove mipi clk from the Amlogic axg clock controller
  - New Rockchip rk3368 clock ids related to camera input
  - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk reparenting
  - A series from Liu Ying that adds some SCU clocks support for i.MX8qxp
    DC0/MIPI-LVDS subsystems
  - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ, and
    clkout1/2 support for i.MX8MM/MN
  - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
  - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
  - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
    (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
    (SYS-DMAC) clocks on Renesas R-Car V3U
  - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
  - Allwinner H616 SoC clk support
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmAwFu8RHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSXiWQ/+LbMeJF5zSvK240XcWomyS+kmImqKPT6e
 +l9Lt5xEPc+KzfMFHGAv+b6vMZCYevMIjBYCleiQ3oSh3sICFJmcCI8AkwQ62aQC
 32VL0z8U956SxmlCcgIgHK3yKUDSZcNC9FtfGRIRzR6srx+Eu/8TK007RpAYn2bQ
 PZYzOjiueSjOpjTRry2WGiCvpwRaJ7XrGj7P4rshO5eKpML1hYAv84vm12QrkoTR
 j7B73x1bOYf4NUBGGzYH5kw6tDO4mZvR+0TdyjI2Yg+SvHSdkpv9pxgRSAFus6rv
 sY/EjUCmCgp+y/MuMRvMA7vk6+THTqF9v4HqE0+izUI+dIoeDmsFVPr3UXGhqmtm
 wmdsMuG/cMhj1rIFz+1aNXQjdbitwmTCyqbiyt+6fOH3NkrP4vQACzQlxeBS2n6o
 E02lMwvMEoLcBMQyWLG+IWasIYWp7L2FlTOGOHxlAkZxJwNmynfaWYafoaIfOtBk
 qtk3ZjNFo3av94AWuKieeWdOj3CY3LGhQqwVuJudOzfvcBu3UybCfceHIwXuIWk1
 msUOh2RA7CTXn7XYPszwEbOlWugKvUc46rTfDBXsmgir7sIIgVXK65SO9xPWd7Bz
 b7MDtrQwSTNYecxjI6uUPRrzKM6xSnL8I69lxaUWT1ScXFcOjqOgc6iwSfLNj4lh
 FFCMY5koKMw=
 =dDCt
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This is all driver updates, the majority of which is a bunch of new
  Qualcomm clk drivers that dominate the diffstat because we add support
  for six SoCs from that particular vendor.

  The other big change is the removal of various clk drivers that are no
  longer used now that the kernel is dropping support for those SoCs.

  Beyond that there's the usual non-critical fixes for existing drivers
  and a good number of patches from Lee Jones that cleanup a bunch of
  W=1 enabled builds.

  Removed Drivers:
   - Remove efm32 clk driver
   - Remove tango4 clk driver
   - Remove zte zx clk driver
   - Remove sirf prima2/atlast clk drivers
   - Remove u300 clk driver

  New Drivers:
   - PLL support on MStar/SigmaStar ARMv7 SoCs
   - CPU clks for Qualcomm SDX55
   - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
   - GCC clks for Qualcomm SM8350
   - GPU clks for Qualcomm SDM660/SDM630

  Updates:
   - Video clk fixups on Qualcomm SM8250
   - Improvements for multimedia clks on Qualcomm MSM8998
   - Fix many warnings with W=1 enabled builds under drivers/clk/
   - Support crystal load capacitance for Versaclock VC5
   - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid
     glitches at boot
   - Convert Xilinx VCU clk driver to a proper clk provider driver
   - Expose Xilinx ZynqMP clk driver to more platforms
   - Amlogic pll driver fixup
   - Amlogic meson8b clock controller dt support clean up
   - Remove mipi clk from the Amlogic axg clock controller
   - New Rockchip rk3368 clock ids related to camera input
   - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
     reparenting
   - A series from Liu Ying that adds some SCU clocks support for
     i.MX8qxp DC0/MIPI-LVDS subsystems
   - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
     and clkout1/2 support for i.MX8MM/MN
   - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
   - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
   - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
     (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
     (SYS-DMAC) clocks on Renesas R-Car V3U
   - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
   - Allwinner H616 SoC clk support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits)
  clk: mstar: msc313-mpll: Fix format specifier
  clk: mstar: Allow MStar clk drivers to be compile tested
  clk: qoriq: use macros to generate pll_mask
  clk: qcom: Add Global Clock controller (GCC) driver for SC7280
  dt-bindings: clock: Add SC7280 GCC clock binding
  clk: qcom: rpmh: Add support for RPMH clocks on SC7280
  dt-bindings: clock: Add RPMHCC bindings for SC7280
  clk: qcom: gcc-sm8350: add gdsc
  dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
  clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
  clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
  clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
  dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
  clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
  clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
  clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
  clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
  clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
  clk: qcom: gdsc: Implement NO_RET_PERIPH flag
  clk: mstar: MStar/SigmaStar MPLL driver
  ...
2021-02-22 09:45:23 -08:00
Linus Torvalds e767b3530a ARM: SoC drivers for v5.12
Updates for SoC specific drivers include a few subsystems that
 have their own maintainers but send them through the soc tree:
 
 SCMI firmware:
  - add support for a completion interrupt
 
 Reset controllers:
  - new driver for BCM4908
  - new devm_reset_control_get_optional_exclusive_released()
    function
 
 Memory controllers:
  - Renesas RZ/G2 support
  - Tegra124 interconnect support
  - Allow more drivers to be loadable modules
 
 TEE/optee firmware:
  - minor code cleanup
 
 The other half of this is SoC specific drivers that do not
 belong into any other subsystem, most of them living in
 drivers/soc:
 
  - Allwinner/sunxi power management work
  - Allwinner H616 support
 
  - ASpeed AST2600 system identification support
 
  - AT91 SAMA7G5 SoC ID driver
  - AT91 SoC driver cleanups
 
  - Broadcom BCM4908 power management bus support
 
  - Marvell mbus cleanups
 
  - Mediatek MT8167 power domain support
 
  - Qualcomm socinfo driver support for PMIC
  - Qualcomm SoC identification for many more products
 
  - TI Keystone driver cleanups for PRUSS and elsewhere
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmApjS8ACgkQYKtH/8kJ
 UidDyw/6ArE2RWN1qk3GJbQKdCYQdqH4Ig/Nc9LA977ul2BX/BohYoEGCoveH5cG
 16FaYK8tYDCSoTfS0+w1Y8r6TgZKcV6GCM0xLSVtaihk2CO81sUfDFBIppJd614a
 2lGx9DW7205ql4vGcQsK31ncr0hVviHG2e8lOEbFc9SkQpmYuLF1dxW2JK9oWGe2
 rLXHKb20N7AvgN8Y6V0YAOGNpu9MOnx0TbTGn6SMgzIKMkpYaSs/oZY11d9jrn7Y
 m/iIahRWzLFR/lYdrD7Jowpy2A/lcwPdQlRkOiuF1s6FFCqxe1yQsrpcbt/7fXes
 UzOyE494GZFtO0zjFuwglsmiAZDMwO/fQVrIzSGV0SXF8LJpiYYTG1b3Yv5SY5Hr
 r7EF4A7GlmNmd6K1HrXTYJz9tr4oxLDw+9LZGx74JV8x0iK3cd1hRTXb1SbspA6h
 S/KRQsuEjpAyQ6xXWVp2fp6VxZkrjIpPavbcQw2RsoBnbNdrcXahTk96JfpWYGjH
 iyJkEKmCF6/w/s5+xQfy+DYepxFDO0YsPbM7kL5qhaY83KBMOHKJFCUZVWj7md5w
 QIVTeeiSewIlT5bG9XyjIfmsImq1acqTW+QCaxCnvMSsZDBbdhTMK48GwyN9U9+x
 jdQCPQye3TKL2WU6U40FPNIr08QcNy4vmJp4fMqwK5xO3+P+Zhs=
 =I2Zn
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  SCMI firmware:
   - add support for a completion interrupt

  Reset controllers:
   - new driver for BCM4908
   - new devm_reset_control_get_optional_exclusive_released() function

  Memory controllers:
   - Renesas RZ/G2 support
   - Tegra124 interconnect support
   - Allow more drivers to be loadable modules

  TEE/optee firmware:
   - minor code cleanup

  The other half of this is SoC specific drivers that do not belong into
  any other subsystem, most of them living in drivers/soc:

   - Allwinner/sunxi power management work
   - Allwinner H616 support

   - ASpeed AST2600 system identification support

   - AT91 SAMA7G5 SoC ID driver
   - AT91 SoC driver cleanups

   - Broadcom BCM4908 power management bus support

   - Marvell mbus cleanups

   - Mediatek MT8167 power domain support

   - Qualcomm socinfo driver support for PMIC
   - Qualcomm SoC identification for many more products

   - TI Keystone driver cleanups for PRUSS and elsewhere"

* tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits)
  soc: aspeed: socinfo: Add new systems
  soc: aspeed: snoop: Add clock control logic
  memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  memory: samsung: exynos5422-dmc: Correct function names in kerneldoc
  memory: ti-emif-pm: Drop of_match_ptr from of_device_id table
  optee: simplify i2c access
  drivers: soc: atmel: fix type for same7
  tee: optee: remove need_resched() before cond_resched()
  soc: qcom: ocmem: don't return NULL in of_get_ocmem
  optee: sync OP-TEE headers
  tee: optee: fix 'physical' typos
  drivers: optee: use flexible-array member instead of zero-length array
  tee: fix some comment typos in header files
  soc: ti: k3-ringacc: Use of_device_get_match_data()
  soc: ti: pruss: Refactor the CFG sub-module init
  soc: mediatek: pm-domains: Don't print an error if child domain is deferred
  soc: mediatek: pm-domains: Add domain regulator supply
  dt-bindings: power: Add domain regulator supply
  soc: mediatek: cmdq: Remove cmdq_pkt_flush()
  soc: mediatek: pm-domains: Add support for mt8167
  ...
2021-02-20 18:42:28 -08:00
Lee Jones b565eb8127 clk: tegra: cvb: Provide missing description for 'tegra_cvb_add_opp_table()'s align param
Fixes the following W=1 kernel build warning(s):

 drivers/clk/tegra/cvb.c:106: warning: Function parameter or member 'align' not described in 'tegra_cvb_add_opp_table'

Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210126124540.3320214-10-lee.jones@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:05 -08:00
Lee Jones a89bd29a53 clk: tegra: clk-tegra30: Remove unused variable 'reg'
Fixes the following W=1 kernel build warning(s):

 drivers/clk/tegra/clk-tegra30.c: In function ‘tegra30_enable_cpu_clock’:
 drivers/clk/tegra/clk-tegra30.c:1107:15: warning: variable ‘reg’ set but not used [-Wunused-but-set-variable]

Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210126124540.3320214-8-lee.jones@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:53:30 -08:00
Peter Geis f4eccc7fea clk: tegra30: Add hda clock default rates to clock driver
Current implementation defaults the hda clocks to clk_m. This causes hda
to run too slow to operate correctly. Fix this by defaulting to pll_p and
setting the frequency to the correct rate.

This matches upstream t124 and downstream t30.

Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210108135913.2421585-2-pgwipeout@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-12 14:43:53 +01:00
Dmitry Osipenko 281462e593 memory: tegra124-emc: Make driver modular
Add modularization support to the Tegra124 EMC driver, which now can be
compiled as a loadable kernel module.

Note that EMC clock must be registered at clk-init time, otherwise PLLM
will be disabled as unused clock at boot time if EMC driver is compiled
as a module. Hence add a prepare/complete callbacks. similarly to what is
done for the Tegra20/30 EMC drivers.

Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201228154920.18846-2-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2021-01-05 18:00:09 +01:00
Linus Torvalds 8653b778e4 The core framework got some nice improvements this time around. We gained the
ability to get struct clk pointers from a struct clk_hw so that clk providers
 can consume the clks they provide, if they need to do something like that. This
 has been a long missing part of the clk provider API that will help us move
 away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are
 added for the clk_set_rate() "range" functions, similar to the tracepoints we
 already have for clk_set_rate() and we added a column to debugfs to help
 developers understand the hardware enable state of clks in case firmware or
 bootloader state is different than what is expected. Overall the core changes
 are mostly improving the clk driver writing experience.
 
 At the driver level, we have the usual collection of driver updates and new
 drivers for new SoCs. This time around the Qualcomm folks introduced a good
 handful of clk drivers for various parts of three or four SoCs. The SiFive
 folks added a new clk driver for their FU740 SoCs, coming in second on the
 diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that
 for various new features. One last thing to note in the driver area is that the
 i.MX driver has gained a new binding to support SCU clks after being on the
 list for many months. It uses a two cell binding which is sort of rare in clk
 DT bindings. Beyond that we have the usual set of driver fixes and tweaks that
 come from more testing and finding out that some configuration was wrong or
 that a driver could support being built as a module.
 
 Core:
  - Add some trace points for clk_set_rate() "range" functions
  - Add hardware enable information to clk_summary debugfs
  - Replace clk-provider.h with of_clk.h when possible
  - Add devm variant of clk_notifier_register()
  - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw
 
 New Drivers:
  - Bindings for Canaan K210 SoC clks
  - Support for SiFive FU740 PRCI
  - Camera clks on Qualcomm SC7180 SoCs
  - GCC and RPMh clks on Qualcomm SDX55 SoCs
  - RPMh clks on Qualcomm SM8350 SoCs
  - LPASS clks on Qualcomm SM8250 SoCs
 
 Updates:
  - DVFS support for AT91 clk driver
  - Update git repo branch for Renesas clock drivers
  - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U
  - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E
  - Stop using __raw_*() I/O accessors in Renesas clk drivers
  - One more conversion of DT bindings to json-schema
  - Make i.MX clk-gate2 driver more flexible
  - New two cell binding for i.MX SCU clks
  - Drop of_match_ptr() in i.MX8 clk drivers
  - Add arch dependencies for Rockchip clk drivers
  - Fix i2s on Rockchip rk3066
  - Add MIPI DSI clks on Amlogic axg and g12 SoCs
  - Support modular builds of Amlogic clk drivers
  - Fix an Amlogic Video PLL clock dependency
  - Samsung Kconfig dependencies updates for better compile test coverage
  - Refactoring of the Samsung PLL clocks driver
  - Small Tegra driver cleanups
  - Minor fixes to Ingenic and VC5 clk drivers
  - Cleanup patches to remove unused variables and plug memory leaks
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl/f/ycRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSXjxg/7BJMFphpZmQb3iy/lZMYfgPh2yxZvrrBj
 zJ2i1mMru/C3BkXTx29HCJvj6/VC2HgGLL6fzfwe7oY3XVRT1Vxlsvka9vNZSNc2
 UYNa8GUwR0mSXDzp5KnzoAQfLwvSqWUIeT8WB+Z+CJ7WIAGWnXgBlqsf/d/mr9hg
 JoAh+ROpbksL6hs61WJSm+7/Yu6efS0Yj0zzLZOINFWvDIOJ+Rp4g1u+qGH9tZyO
 I2Bik75Sc8hqvLUP5SVzI/1H4yLB0On+ADgVRwjvrKPVX56alYquOUMsU+sy4SeY
 ONQBki3vV5gtJHG1qvkwTC5/Yw20eUsrmrc7PNECvb1zo5Tp4QuOAR5nHCb4fg8u
 n7RRd1MktTAUAQxTzBaNYtix3Q19fjSR44C/1B6lKk6xkN+w4uYLi2GHrADy9rXa
 SwQVTKTGc8LjGywDaAOXdAyx2FMAtt1OvkTxZ238+aoHw5nQDHWKxu5TwYK6b5jG
 aEFzTCIEYlzRLqcZyGONSD0WXmQWyoNiPwJ3B7RDRfpg7dPESyKIB4MzGWiX9eDy
 lri/SoVH08c1sRf8AzIoi+CUNi8geTNAHHlJfiGznrv81ttVf3FioWyWLjr+SmBV
 rNxn35WxeDWoCZqtrLJlg5skVgmD8BRXLZTI9udPG8u6D7OdWdJBuMZ6EelO+OZg
 /n4w8tdo3cE=
 =Wt9O
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The core framework got some nice improvements this time around. We
  gained the ability to get struct clk pointers from a struct clk_hw so
  that clk providers can consume the clks they provide, if they need to
  do something like that. This has been a long missing part of the clk
  provider API that will help us move away from exposing a struct clk
  pointer in the struct clk_hw. Tracepoints are added for the
  clk_set_rate() "range" functions, similar to the tracepoints we
  already have for clk_set_rate() and we added a column to debugfs to
  help developers understand the hardware enable state of clks in case
  firmware or bootloader state is different than what is expected.
  Overall the core changes are mostly improving the clk driver writing
  experience.

  At the driver level, we have the usual collection of driver updates
  and new drivers for new SoCs. This time around the Qualcomm folks
  introduced a good handful of clk drivers for various parts of three or
  four SoCs. The SiFive folks added a new clk driver for their FU740
  SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic
  SoCs had lots of work done after that for various new features. One
  last thing to note in the driver area is that the i.MX driver has
  gained a new binding to support SCU clks after being on the list for
  many months. It uses a two cell binding which is sort of rare in clk
  DT bindings. Beyond that we have the usual set of driver fixes and
  tweaks that come from more testing and finding out that some
  configuration was wrong or that a driver could support being built as
  a module.

  Summary:

  Core:
   - Add some trace points for clk_set_rate() "range" functions
   - Add hardware enable information to clk_summary debugfs
   - Replace clk-provider.h with of_clk.h when possible
   - Add devm variant of clk_notifier_register()
   - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw

  New Drivers:
   - Bindings for Canaan K210 SoC clks
   - Support for SiFive FU740 PRCI
   - Camera clks on Qualcomm SC7180 SoCs
   - GCC and RPMh clks on Qualcomm SDX55 SoCs
   - RPMh clks on Qualcomm SM8350 SoCs
   - LPASS clks on Qualcomm SM8250 SoCs

  Updates:
   - DVFS support for AT91 clk driver
   - Update git repo branch for Renesas clock drivers
   - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E
   - Stop using __raw_*() I/O accessors in Renesas clk drivers
   - One more conversion of DT bindings to json-schema
   - Make i.MX clk-gate2 driver more flexible
   - New two cell binding for i.MX SCU clks
   - Drop of_match_ptr() in i.MX8 clk drivers
   - Add arch dependencies for Rockchip clk drivers
   - Fix i2s on Rockchip rk3066
   - Add MIPI DSI clks on Amlogic axg and g12 SoCs
   - Support modular builds of Amlogic clk drivers
   - Fix an Amlogic Video PLL clock dependency
   - Samsung Kconfig dependencies updates for better compile test coverage
   - Refactoring of the Samsung PLL clocks driver
   - Small Tegra driver cleanups
   - Minor fixes to Ingenic and VC5 clk drivers
   - Cleanup patches to remove unused variables and plug memory leaks"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
  dt-binding: clock: Document canaan,k210-clk bindings
  dt-bindings: Add Canaan vendor prefix
  clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"
  clk: ingenic: Fix divider calculation with div tables
  clk: sunxi-ng: Make sure divider tables have sentinel
  clk: s2mps11: Fix a resource leak in error handling paths in the probe function
  clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
  clk: si5351: Wait for bit clear after PLL reset
  clk: at91: sam9x60: remove atmel,osc-bypass support
  clk: at91: sama7g5: register cpu clock
  clk: at91: clk-master: re-factor master clock
  clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz
  clk: at91: sama7g5: decrease lower limit for MCK0 rate
  clk: at91: sama7g5: remove mck0 from parent list of other clocks
  clk: at91: clk-sam9x60-pll: allow runtime changes for pll
  clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics
  clk: at91: clk-master: add 5th divisor for mck master
  clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT
  dt-bindings: clock: at91: add sama7g5 pll defines
  clk: at91: sama7g5: fix compilation error
  ...
2020-12-21 10:39:37 -08:00
Dmitry Osipenko 5bf5861d6e clk: tegra: Fix duplicated SE clock entry
The periph_clks[] array contains duplicated entry for Security Engine
clock which was meant to be defined for T210, but it wasn't added
properly. This patch corrects the T210 SE entry and fixes the following
error message on T114/T124: "Tegra clk 127: register failed with -17".

Fixes: dc37fec483 ("clk: tegra: periph: Add new periph clks and muxes for Tegra210")
Tested-by Nicolas Chauvet <kwizart@gmail.com>
Reported-by Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201025224212.7790-1-digetx@gmail.com
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10 12:51:59 -08:00
Sivaram Nair a886c310d9 clk: tegra: bpmp: Clamp clock rates on requests
BPMP firmware ABI expects the rate inputs in int64_t. However,
tegra_bpmp_clk_round_rate() and tegra_bpmp_clk_set_rate() functions
directly assign 'unsigned long' inputs to a int64_t value causing
unexpected rounding errors.

Fix this by clipping the input rate to S64_MAX.

Signed-off-by: Sivaram Nair <sivaramn@nvidia.com>
[mperttunen: slight cleanup]
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Sivaram Nair <sivaramn@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26 16:28:07 +01:00
Nicolin Chen 6160aca443 clk: tegra: Do not return 0 on failure
Return values from read_dt_param() will be either TRUE (1) or
FALSE (0), while dfll_fetch_pwm_params() returns 0 on success
or an ERR code on failure.

So this patch fixes the bug of returning 0 on failure.

Fixes: 36541f0499 ("clk: tegra: dfll: support PWM regulator control")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-20 17:19:46 +01:00
Dmitry Osipenko 4cfdad35ae clk: tegra: Export Tegra20 EMC kernel symbols
We're going to modularize Tegra EMC drivers and some of the EMC-clock
driver symbols need to be exported.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201104164923.21238-2-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-06 19:24:04 +01:00
Linus Torvalds 3fec0eaaf0 This pull request contains zero diff to the core framework. It is a collection
of various clk driver updates. The biggest driver updates in terms of lines of
 code is the Allwinner driver, closely followed by the Qualcomm and Mediatek
 drivers. All of those hit high because we add so many lines of clk data. Coming
 in fourth place is i.MX which also adds a bunch of clk data. This accounts for
 the new driver additions this time around.
 
 Otherwise the patches are lots of little cleanups and fixes for various clk
 drivers that have baked in linux-next for a while. I suppose one highlight or
 theme is that more clk drivers are being updated to work as modules, which is
 interesting to see such critical SoC infrastructure work as a loadable module.
 
 New Drivers:
  - Support qcom SM8150/SM8250 video and display clks
  - Support Mediatek MT8167 clks
  - Add clock for CRC block found on vf610 SoCs
  - Add support for the Renesas R-Car V3U (R8A779A0) SoC
  - Add support for the VSP for Resizing clock on Renesas RZ/G1H
  - Support Allwinner A100 SoC clks
 
 Removed Drivers:
  - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped
 
 Updates:
  - Change how qcom's display port clks work
  - Small non-critical fixes for TI clk driver
  - Remove various unused variables in clk drivers
  - Allow Rockchip clk driver to be a module
  - Remove most __clk_lookup() calls in Samsung drivers (yay!)
  - Support building i.MX ARMv8 platforms clock driver as module
  - Some kerneldoc fixes here and there
  - A couple of minor i.MX clk data corrections
  - Update audio clock inverter and fdiv2 flag on Amlogic g12
  - Make amlogic clk drivers configurable in Kconfig
  - Fix Renesas VSP clock names to match corrected hardware documentation
  - Sigma-delta modulation on Allwinner R40
  - Various fixes for at91 clk driver
  - Use semicolons instead of commas in some places
  - Mark some variables const so they can move to RO memory
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl+R0K0RHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSU9xw/+KRDZ/xo7GKeC7QrRt4q5eWIW4l/HzjYH
 yeht/i7cEXy+jSJuOTBj4sIpOdvzdBQfsqMiNg7RKdtYs0HbYFywxWtnvetptuM1
 BCgSMDHHJ59EJSPEWAvE6bsl9xaVl4o0XEI2+qAoJ4OIcJVzVz+vRGQ7pDyEk2XT
 zTXRw4W+HftZXFB8Nw0JTj9YzBoZJzpnAB/vu2HzMYVAvoeQ8RhcdbipdSTjI+zY
 ++zkt8cmGP0iKloHbi3rk1A7w/ORJ//UjT24xmkwAO6t1CWEErVzXBtGkQ9K4ijy
 F2w5CzJb/szGCfnGlcchQ5kjB/FfgIKuLNlhTiptY+UZGIvSAbndhMSS3JFsqGbl
 aYUk5fpjdpneSsIPvHnnz1jIaK6OmHSoxmq7FgwaU+YDX6ZK6UKalMHbHUEpiNX+
 3a+FeKe2IVMZ0uVqpJGnd/o4Kud2CeRM1ufqu15ygbujfSH6xcO7fbUi/C8XJLMX
 7PR0Ze0PhwkMezdlxb3WpK+4MrOny3JT0DTAbAQDdAwsKFP/Sex4QMWP8PUdTmGY
 dQcrgvuXYC1hufOaY1JzxjfGrhEBuJAr7BsjBI+etUpnJ9Z5Uhguti/lnKm7oAlI
 EceBJ4B5M1iUYTkKXYxLWWzUlkIKNzgHvjRM2Q6Nn5LbyVlzM4i284C/E4M8AmVB
 nSXy1nWkSAU=
 =sKI8
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This contains no changes to the core framework. It is a collection of
  various clk driver updates.

  The biggest driver updates in terms of lines of code is the Allwinner
  driver, closely followed by the Qualcomm and Mediatek drivers. All of
  those hit high because we add so many lines of clk data. Coming in
  fourth place is i.MX which also adds a bunch of clk data. This
  accounts for the new driver additions this time around.

  Otherwise the patches are lots of little cleanups and fixes for
  various clk drivers that have baked in linux-next for a while. I
  suppose one highlight or theme is that more clk drivers are being
  updated to work as modules, which is interesting to see such critical
  SoC infrastructure work as a loadable module.

  New Drivers:
   - Support qcom SM8150/SM8250 video and display clks
   - Support Mediatek MT8167 clks
   - Add clock for CRC block found on vf610 SoCs
   - Add support for the Renesas R-Car V3U (R8A779A0) SoC
   - Add support for the VSP for Resizing clock on Renesas RZ/G1H
   - Support Allwinner A100 SoC clks

  Removed Drivers:
   - Remove i.MX21 clock driver, as i.MX21 platform support is being
     dropped

  Updates:
   - Change how qcom's display port clks work
   - Small non-critical fixes for TI clk driver
   - Remove various unused variables in clk drivers
   - Allow Rockchip clk driver to be a module
   - Remove most __clk_lookup() calls in Samsung drivers (yay!)
   - Support building i.MX ARMv8 platforms clock driver as module
   - Some kerneldoc fixes here and there
   - A couple of minor i.MX clk data corrections
   - Update audio clock inverter and fdiv2 flag on Amlogic g12
   - Make amlogic clk drivers configurable in Kconfig
   - Fix Renesas VSP clock names to match corrected hardware
     documentation
   - Sigma-delta modulation on Allwinner R40
   - Various fixes for at91 clk driver
   - Use semicolons instead of commas in some places
   - Mark some variables const so they can move to RO memory"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits)
  clk: imx8mq: Fix usdhc parents order
  clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
  clk: Restrict CLK_HSDK to ARC_SOC_HSDK
  clk: at91: sam9x60: support only two programmable clocks
  clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
  clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
  clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
  clk: ingenic: Use readl_poll_timeout instead of custom loop
  clk: ingenic: Use to_clk_info() macro for all clocks
  clk: bcm2835: add missing release if devm_clk_hw_register fails
  clk: at91: clk-sam9x60-pll: remove unused variable
  clk: at91: clk-main: update key before writing AT91_CKGR_MOR
  clk: at91: remove the checking of parent_name
  clk: clk-prima2: fix return value check in prima2_clk_init()
  clk: mmp2: Fix the display clock divider base
  clk: pxa: Constify static struct clk_ops
  clk: baikal-t1: Mark Ethernet PLL as critical
  clk: qoriq: modify MAX_PLL_DIV to 32
  clk: axi-clkgen: Set power bits for fractional mode
  clk: axi-clkgen: Add support for fractional dividers
  ...
2020-10-22 12:53:28 -07:00
Stephen Boyd f102ed0686 clk: tegra: Drop !provider check in tegra210_clk_emc_set_rate()
The provider variable is already dereferenced earlier in this function.
Drop the check for NULL as it is impossible.

Found with smatch

drivers/clk/tegra/clk-tegra210-emc.c:131 tegra210_clk_emc_set_rate() warn: variable dereferenced before check 'provider' (see line 124)

Cc: Joseph Lo <josephl@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Fixes: 0ac65fc946 ("clk: tegra: Implement Tegra210 EMC clock")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200922191641.2305144-1-sboyd@kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
2020-09-23 16:59:28 -07:00
Thierry Reding 2f878d0421 clk: tegra: Fix missing prototype for tegra210_clk_register_emc()
Include the Tegra driver's clk.h to pull in the prototype definition for
this function so that compilers don't warn about it being missing.

Fixes: 0ac65fc946 ("clk: tegra: Implement Tegra210 EMC clock")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-21 14:09:10 +02:00
Thierry Reding 5105660ee8 clk: tegra: Always program PLL_E when enabled
Commit bff1cef5f2 ("clk: tegra: Don't enable already enabled PLLs")
added checks to avoid enabling PLLs that have already been enabled by
the bootloader. However, the PLL_E configuration inherited from the
bootloader isn't necessarily the one that is needed for the kernel.

This can cause SATA to fail like this:

    [    5.310270] phy phy-sata.6: phy poweron failed --> -110
    [    5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110
    [    5.323022] tegra-ahci: probe of 70027000.sata failed with error -110

Fix this by always programming the PLL_E. This ensures that any mis-
configuration by the bootloader will be overwritten by the kernel.

Fixes: bff1cef5f2 ("clk: tegra: Don't enable already enabled PLLs")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Tested-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-21 14:09:09 +02:00
Thierry Reding 6402e780e9 clk: tegra: Capitalization fixes
HW, XUSB and PLL are abbreviations and should be all-uppercase.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-21 14:09:08 +02:00
Dmitry Osipenko fa64023763 clk: tegra: pll: Improve PLLM enable-state detection
Power Management Controller (PMC) can override the PLLM clock settings,
including the enable-state. Although PMC could only act as a second level
gate, meaning that PLLM needs to be enabled by the Clock and Reset
Controller (CaR) anyways if we want it to be enabled. Hence, when PLLM is
overridden by PMC, it needs to be enabled by CaR and ungated by PMC in
order to be functional. Please note that this patch doesn't fix any known
problem, and thus, it's merely a minor improvement.

Link: https://lore.kernel.org/linux-arm-kernel/20191210120909.GA2703785@ulmo/T/
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200709172057.13951-1-digetx@gmail.com
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-27 18:21:17 -07:00
Linus Torvalds 6f630784cc This time around we have 4 lines of diff in the core framework, removing a
function that isn't used anymore. Otherwise the main new thing for the common
 clk framework is that it is selectable in the Kconfig language now. Hopefully
 this will let clk drivers and clk consumers be testable on more than the
 architectures that support the clk framework. The goal is to introduce some
 Kunit tests for the framework.
 
 Outside of the core framework we have the usual set of various driver updates
 and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the
 largest addition this time around in terms of lines of code. After that the x86
 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or
 upcoming SoCs. After that the dirstat shows the usual suspects working on their
 SoC support by fixing minor bugs, correcting data and converting some of their
 DT bindings to YAML.
 
 Core:
  - Allow the COMMON_CLK config to be selectable
 
 New Drivers:
  - Clk driver for Baikal-T1 SoCs
  - Mediatek MT6765 clock support
  - Support for Intel Agilex clks
  - Add support for X1830 and X1000 Ingenic SoC clk controllers
  - Add support for the new Renesas RZ/G1H (R8A7742) SoC
  - Add support for Qualcomm's MSM8939 Generic Clock Controller
 
 Updates:
  - Support IDT VersaClock 5P49V5925
  - Bunch of updates for HSDK clock generation unit (CGU) driver
  - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
  - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
  - Enable supply regulators for GPU gdscs on Qualcomm SoCs
  - Add support for Si5342, Si5344 and Si5345 chips
  - Support custom flags in Xilinx zynq firmware
  - Various small fixes to the Xilinx clk driver
  - A single minor rounding fix for the legacy Allwinner clock support
  - A few patches from Abel Vesa as preparation of adding audiomix clock support
    on i.MX
  - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3
    drivers
  - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on
    aarch64 hardware
  - A series from Peng Fan to improve i.MX8M clock drivers, using composite
    clock for core and bus clk slice
  - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined
    bit rates
  - A couple changes for EMC frequency scaling on Tegra210
  - Support for CPU frequency scaling on Tegra20/Tegra30
  - New clk gate for CSI test pattern generator on Tegra210
  - Regression fixes for Samsung exynos542x and exynos5433 SoCs
  - Use of fallthrough; attribute for Samsung s3c24xx
  - Updates and fixup HDMI and video clocks on Meson8b
  - Fixup reset polarity on Meson8b
  - Fix GPU glitch free mux switch on Meson gx and g12
  - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2
  - Two more conversions of Renesas DT bindings to json-schema
  - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl7gEUgRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUemxAAlQKzx0yMS3yx5twJ4RSFUvf3hf4OqyPp
 O46soqADk+l69Z4SUUBsMjt8el5Sqmm4d1j1Gpfmgp3ZlumHCQK+qGYp48IXbwRP
 Jlo5sKNlNL6yhCd+ixPn4j7W/HbpGs4cciWOXkGQtYEGjhHm3Wllhd9MqpL2YjLx
 gZW60NqWtOe1XeB4ILyYQGisNwAGDi5XuBeNvxG12H/LaGC1mwtBX9yoNAehr9bF
 peJ2XnO02zFo73OCyzIOkw1uY4u7ZtwPdHGhymoGeVlcBWO6KwKesNkHnji/Grlv
 wMbsGLoRV/i3PL3q5kZIDigo8sqZ9RUG+9piRAoiLM5AgkSypw3/q9T+ujTfZp8t
 kgvFha6bLZz31UFmr4lBJPTT5Q/hAoe1W6RB6HZkx7XNqUpsAS04SwkQztAqkJqZ
 9zlYJrXgLlP5qcNllJ6zvUWkMqtmIKW4ZkjYe4u84yk5Co7bX8DCYa+QOKCz+pV4
 IbjRT62OrX2ZlXJYwkLb4m1nhZ7tBzhzIRP1umL0ukhxdomK6ofSNPzbBF9+t1eR
 /ai2/Ch6L6WIwDINEp+chO67/dJaj5W3WNqGMCmVt37myW1kBjH3eg0YG4cp7NYZ
 /jSjdWczQy/8BgY5V1009MRXI4uyazQxBw+apDcIGezamOKBmuwjBcvkf1D0mL2x
 Y6OclK5ljsw=
 =nuG5
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time around we have four lines of diff in the core framework,
  removing a function that isn't used anymore. Otherwise the main new
  thing for the common clk framework is that it is selectable in the
  Kconfig language now. Hopefully this will let clk drivers and clk
  consumers be testable on more than the architectures that support the
  clk framework. The goal is to introduce some Kunit tests for the
  framework.

  Outside of the core framework we have the usual set of various driver
  updates and non-critical fixes. The dirstat shows that the new
  Baikal-T1 driver is the largest addition this time around in terms of
  lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
  drivers introduce many lines to support new or upcoming SoCs. After
  that the dirstat shows the usual suspects working on their SoC support
  by fixing minor bugs, correcting data and converting some of their DT
  bindings to YAML.

  Core:
   - Allow the COMMON_CLK config to be selectable

  New Drivers:
   - Clk driver for Baikal-T1 SoCs
   - Mediatek MT6765 clock support
   - Support for Intel Agilex clks
   - Add support for X1830 and X1000 Ingenic SoC clk controllers
   - Add support for the new Renesas RZ/G1H (R8A7742) SoC
   - Add support for Qualcomm's MSM8939 Generic Clock Controller

  Updates:
   - Support IDT VersaClock 5P49V5925
   - Bunch of updates for HSDK clock generation unit (CGU) driver
   - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
   - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
   - Enable supply regulators for GPU gdscs on Qualcomm SoCs
   - Add support for Si5342, Si5344 and Si5345 chips
   - Support custom flags in Xilinx zynq firmware
   - Various small fixes to the Xilinx clk driver
   - A single minor rounding fix for the legacy Allwinner clock support
   - A few patches from Abel Vesa as preparation of adding audiomix
     clock support on i.MX
   - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
     clk-pllv3 drivers
   - Drop dependency on ARM64 for i.MX8M clock driver, to support
     aarch32 mode on aarch64 hardware
   - A series from Peng Fan to improve i.MX8M clock drivers, using
     composite clock for core and bus clk slice
   - Set a better parent clock for flexcan on i.MX6UL to support CiA102
     defined bit rates
   - A couple changes for EMC frequency scaling on Tegra210
   - Support for CPU frequency scaling on Tegra20/Tegra30
   - New clk gate for CSI test pattern generator on Tegra210
   - Regression fixes for Samsung exynos542x and exynos5433 SoCs
   - Use of fallthrough; attribute for Samsung s3c24xx
   - Updates and fixup HDMI and video clocks on Meson8b
   - Fixup reset polarity on Meson8b
   - Fix GPU glitch free mux switch on Meson gx and g12
   - A minor fix for the currently unused suspend/resume handling on
     Renesas RZ/A1 and RZ/A2
   - Two more conversions of Renesas DT bindings to json-schema
   - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
  clk: mediatek: Remove ifr{0,1}_cfg_regs structures
  clk: baikal-t1: remove redundant assignment to variable 'divider'
  clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
  dt-bindings: clock: Add a missing include to MMP Audio Clock binding
  dt: Add bindings for IDT VersaClock 5P49V5925
  clk: vc5: Add support for IDT VersaClock 5P49V6965
  clk: Add Baikal-T1 CCU Dividers driver
  clk: Add Baikal-T1 CCU PLLs driver
  dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
  dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
  clk: mediatek: assign the initial value to clk_init_data of mtk_mux
  clk: mediatek: Add MT6765 clock support
  clk: mediatek: add mt6765 clock IDs
  dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
  CLK: HSDK: CGU: add support for 148.5MHz clock
  CLK: HSDK: CGU: support PLL bypassing
  CLK: HSDK: CGU: check if PLL is bypassed first
  clk: clk-si5341: Add support for the Si5345 series
  ...
2020-06-10 11:42:19 -07:00
Thierry Reding 4d3d641714 clk: tegra: Fix initial rate for pll_a on Tegra124
pll_a_out0 and the I2S clocks are already configured to default to rates
corresponding to a 44.1 kHz sampling rate, but the pll_a configuration
was set to a default that is not listed in the frequency table, which
caused the PLL code to compute an invalid configuration. As a result of
this invalid configuration, Jetson TK1 fails to resume from suspend.

This used to get papered over because the ASoC driver would force audio
clocks to a 44.1 kHz configuration on boot. However, that's not really
necessary and was hence removed in commit ff5d18cb04 ("ASoC: tegra:
Enable audio mclk during tegra_asoc_utils_init()").

Fix the initial rate for pll_a so that it matches the 44.1 kHz entry in
the pll_a frequency table.

Fixes: ff5d18cb04 ("ASoC: tegra: Enable audio mclk during tegra_asoc_utils_init()")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lkml.kernel.org/r/20200505071655.644773-1-thierry.reding@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-12 16:26:18 -07:00
Sowjanya Komatineni dec396322d clk: tegra: Add Tegra210 CSI TPG clock gate
Tegra210 CSI hardware internally uses PLLD for internal test pattern
generator logic.

PLLD_BASE register in CAR has a bit CSI_CLK_SOURCE to enable PLLD
out to CSI during TPG mode.

This patch adds this CSI TPG clock gate to Tegra210 clock driver
to allow Tegra video driver to ungate CSI TPG clock during TPG mode
and gate during non TPG mode.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:43 +02:00
Dmitry Osipenko 4232985441 clk: tegra30: Use custom CCLK implementation
We're going to use the generic cpufreq-dt driver on Tegra30 and thus CCLK
intermediate re-parenting will be performed by the clock driver. There is
now special CCLK implementation that supports all CCLK quirks, this patch
makes Tegra30 SoCs to use that implementation.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:43 +02:00
Dmitry Osipenko 2db2fcd7a2 clk: tegra20: Use custom CCLK implementation
We're going to use the generic cpufreq-dt driver on Tegra20 and thus CCLK
intermediate re-parenting will be performed by the clock driver. There is
now special CCLK implementation that supports all CCLK quirks, this patch
makes Tegra20 SoCs to use that implementation.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:43 +02:00
Dmitry Osipenko dec15c9901 clk: tegra: cclk: Add helpers for handling PLLX rate changes
CCLK should be re-parented away from PLLX if PLLX's rate is changing.
The PLLP parent is a common safe CPU parent for all Tegra SoCs, thus
CCLK will be re-parented to PLLP before PLLX rate-change begins and then
switched back to PLLX after the rate-change completion. This patch adds
helper functions which perform CCLK re-parenting, these helpers will be
utilized by further patches.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:43 +02:00
Dmitry Osipenko 9157abe74b clk: tegra: pll: Add pre/post rate-change hooks
There is a need to temporarily re-parent CCLK away from PLLX if PLLX's
rate is about to change. The newly introduced PLL pre/post rate-change
hooks allow to handle such case.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:42 +02:00
Dmitry Osipenko 1641567920 clk: tegra: Add custom CCLK implementation
CCLK stands for "CPU Clock", CPU core is running off CCLK. CCLK supports
multiple parents, it has internal clock divider and a clock skipper.
PLLX is the main CCLK parent that provides clock rates above 1GHz and it
has special property such that the CCLK's internal divider is set into
bypass mode when PLLX is selected as a parent for CCLK.

This patch forks generic Super Clock into CCLK implementation which takes
into account all CCLK specifics. The proper CCLK implementation is needed
by the upcoming Tegra20 CPUFreq driver update that will allow to utilize
the generic cpufreq-dt driver by moving intermediate clock selection into
the clock driver.

Note that technically this patch could be squashed into clk-super.c, but
it is cleaner to have a separate source file. Also note that currently all
CCLKLP bits are left in the clk-super.c and only CCLKG is supported by
clk-tegra-super-cclk. It shouldn't be difficult to move the CCLKLP bits,
but CCLKLP is not used by anything in kernel and thus better not to touch
it for now.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:42 +02:00
Joseph Lo 1d3e3c4e12 clk: tegra: Remove the old emc_mux clock for Tegra210
Remove the old emc_mux clock and don't use the common EMC clock
definition. This will be replaced by a new clock defined in the
EMC driver.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:42 +02:00
Joseph Lo 0ac65fc946 clk: tegra: Implement Tegra210 EMC clock
The EMC clock needs to carefully coordinate with the EMC controller
programming to make sure external memory can be properly clocked. Do so
by hooking up the EMC clock with an EMC provider that will specify which
rates are supported by the EMC and provide a callback to use for setting
the clock rate at the EMC.

Based on work by Peter De Schrijver <pdeschrijver@nvidia.com>.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:42 +02:00
Joseph Lo a3cba697a2 clk: tegra: Export functions for EMC clock scaling
Export functions to allow accessing the CAR register required by EMC
clock scaling. These functions will be used to access the CAR register
as part of the scaling sequence.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:41 +02:00
Joseph Lo cd4d6f3575 clk: tegra: Add PLLP_UD and PLLMB_UD for Tegra210
Introduce the low jitter path of PLLP and PLLMB which can be used as EMC
clock source.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:41 +02:00
Thierry Reding 3dcbd36fa3 clk: tegra: Rename Tegra124 EMC clock source file
This code is only used on Tegra124, so rename it accordingly to make it
more consistent with other file names.

While at it, also get rid of the TEGRA_CLK_EMC Kconfig symbol that's
really just an alias for TEGRA124_EMC.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:41 +02:00
Stephen Boyd ba0eb9d57a clk: tegra: Use NULL for pointer initialization
This silences a sparse warning about using a plain integer instead of
NULL for a pointer.

Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-24 19:14:12 -07:00
Sowjanya Komatineni efdd205ccb clk: tegra: Remove audio clocks configuration from clock driver
Current clock driver enables PLLA, cdev1 on Tegra20 and extern1 on
Tegra30 and above as a part of clocks init and there is no need to
have these audio clocks enabled by the clock driver.

extern1 is used as parent for clk_out_1 and clk_out_1 is dedicated
for audio mclk on Tegra30 and above Tegra platforms and these clocks
are taken care by ASoC driver.

So, this patch removes audio related clocks configuration from clock
init of Tegra20 and above.

Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12 12:10:49 +01:00
Sowjanya Komatineni acbeec3d37 clk: tegra: Remove tegra_pmc_clk_init along with clk ids
Current Tegra clock driver registers PMC clocks clk_out_1, clk_out_2,
clk_out_3 and 32KHz blink output in tegra_pmc_init() which does direct
PMC register access during clk_ops and these PMC register read and write
access will not happen when PMC is in secure mode.

Any direct PMC register access from non-secure world will not go
through.

All the PMC clocks are moved to Tegra PMC driver with PMC as a clock
provider.

This patch removes tegra_pmc_clk_init along with corresponding clk ids
from Tegra clock driver.

Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12 11:34:04 +01:00
Sowjanya Komatineni c9e28c25a0 clk: tegra: Remove CLK_M_DIV fixed clocks
Tegra has no CLK_M_DIV2 and CLK_M_DIV4 clocks and instead it has
OSC_DIV2 and OSC_DIV4 clocks from OSC pads which are the possible
parents of PMC clocks for Tegra30 through Tegra210.

Tegra PMC clock parents are changed to use OSC_DIV clocks.

So, this patch removes CLK_M_DIV fixed clocks

Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12 11:33:32 +01:00