Граф коммитов

710 Коммитов

Автор SHA1 Сообщение Дата
Jiri Olsa 70b01dfd76 perf hists: Fix crash in perf_hpp__reset_output_field()
Du Changbin reported crash [1] when calling perf_hpp__reset_output_field()
after unregistering field via perf_hpp__column_unregister().

This ends up in calling following list_del* sequence on
the same format:

  perf_hpp__column_unregister:
    list_del(&format->list);
  perf_hpp__reset_output_field:
    list_del_init(&fmt->list);

where the later list_del_init might touch already freed formats.

Fixing this by replacing list_del() with list_del_init() in
perf_hpp__column_unregister().

[1] http://marc.info/?l=linux-kernel&m=149059595826019&w=2

Reported-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20171013083736.15037-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-13 16:43:33 -03:00
Jiri Olsa 8233822f40 perf ui progress: Add size info into progress bar
Adding the size values '[current/total]' into progress bar, to show more
detailed progress of data reading.

Adding new ui_progress__init_size function to specify we want to display
the size.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908120510.22515-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-13 09:49:15 -03:00
Jiri Olsa 25cc4eb44b perf ui progress: Add ui specific init function
Adding ui specific init function allowing to setup the progress bar
width based on current screen scales.

Adding TUI init function to get more grained update of the progress bar.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908120510.22515-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-13 09:49:15 -03:00
Jiri Olsa a82bfd041d perf ui progress: Fix progress update
We currently update the 'next' variable only with a single step value.
But it's possible the 'adv' update is bigger than single 'step' value.
This would leave 'next' value under counted and force unnecessary
ui_progress__ops->update calls.

Calculate the amount of steps we need for 'adv' update and increase the
'next' with that amounts of steps.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908120510.22515-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:34:54 -03:00
Jiri Olsa 4d286c89e4 perf ui progress: Make sure we always define step value
Unlikely, but we could have ui_progress__init being called with total <
16, which would set the next and step variables to 0. That would force
unnecessary ui_progress__ops->update calls because 'next' would never
raise.

Forcing the next and step values to be always > 0.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908120510.22515-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:34:46 -03:00
Arnaldo Carvalho de Melo eba9fac017 perf annotate browser: Help for cycling thru hottest instructions with TAB/shift+TAB
The popup help accessed via 'h' wasn't mentioning about TAB and
shift-TAB, just about 'H', which goes to the hottest line, while the
former two are the hotkeys for actually cycling thru the hottest lines.

Reported-by: Flavio Bruno Leitner <fbl@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5ppym6odizfj1ifa4t7neiku@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-01 14:55:40 -03:00
Jin Yao c4ee06251d perf report: Calculate the average cycles of iterations
The branch history code has a loop detection function. With this, we can
get the number of iterations by calculating the removed loops.

While it would be nice for knowing the average cycles of iterations.
This patch adds up the cycles in branch entries of removed loops and
save the result to the next branch entry (e.g. branch entry A).

Finally it will display the iteration number and average cycles at the
"from" of branch entry A.

For example:
perf record -g -j any,save_type ./div
perf report --branch-history --no-children --stdio

--22.63%--main div.c:42 (RET CROSS_2M)
          compute_flag div.c:28 (cycles:2 iter:173115 avg_cycles:2)
          |
           --10.73%--compute_flag div.c:27 (RET CROSS_2M)
                     rand rand.c:28 (cycles:1)
                     rand rand.c:28 (RET CROSS_2M)
                     __random random.c:298 (cycles:1)
                     __random random.c:297 (COND_BWD CROSS_2M)
                     __random random.c:295 (cycles:1)
                     __random random.c:295 (COND_BWD CROSS_2M)
                     __random random.c:295 (cycles:1)
                     __random random.c:295 (RET CROSS_2M)

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1502111115-18305-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-30 10:03:27 -03:00
Taeung Song 3a555c7799 perf annotate browser: Circulate percent, total-period and nr-samples view
Using the existing 't' hotkey, support the three views: percent, total
period and number of samples on the annotate TUI browser, circulating
them like below:

  Percent -> Total Period -> Nr Samples -> Percent ...

Committer notes:

Removed new 'e' hotkey, should be resubmitted as a separate patch, with
proper justification for its inclusion.

Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/1503046028-5691-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-18 11:23:20 -03:00
Taeung Song 9cef4b0b5b perf annotate browser: Support --show-nr-samples option
Support the --show-nr-samples in the TUI browser.

Committer notes:

Lift the restriction about --tui but leave it for --gtk:

  $ export LD_LIBRARY_PATH=~/lib64
  $ perf annotate --gtk --show-nr-samples --show-nr-samples is not available in --gtk mode at this time
  $

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1503046023-5646-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-18 11:15:09 -03:00
Arnaldo Carvalho de Melo 3861c4a49b perf annotate TUI: Set appropriate column width for period/percent
Either when we start 'perf annotate' or 'perf report' with
--show-total-period or when we, in the annotate browser, press 't' to
toggle period/percent for the first column, we need to adjust the width
for the 'period' case.

Based-on-a-patch-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-n2np5qcs20u6qjdr9orygne6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-28 13:19:32 -03:00
Taeung Song f67d395c6e perf annotate TUI: Fix column header when toggling period/percent
We have the 't' hotkey to toggle showing either the total period or the
percentage of samples for a given line, but we forgot to toggle as well
the column header, always showing "Percent", even when showing the
period, fix it.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1501172169-6761-1-git-send-email-treeze.taeung@gmail.com
[ Extracted from a larger patch, s/Event count/Period/g ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-28 12:53:08 -03:00
Arnaldo Carvalho de Melo bc1e5d60ce perf annotate TUI: Clarify calculation of column header widths
In commit f8f4aaead5 ("perf annotate: Finally display IPC and cycle
accounting") the 'pcnt_width' variable was abused in a few places to
also include the optional width of the "IPC" and "cycles" columns, while
in other places we stopped using 'pcnt_width' and instead its previous
equation...

Now that we need to tap into annotate_browser__pcnt_width() to consider
if --show-total-period is being used and instead of that hardcoded 7
(strlen("Percent")) we need to use it or strlen("Event count") we need
this properly clarified to avoid having to touch all the (7 * nr_events)
places.

Clarify this by introducing a separate annotate_browser__cycles_width()
to leave the pcnt_width calculate just what its name implies.

Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-szgb07t4k5wtvks8nzwkg710@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-28 12:53:07 -03:00
Taeung Song 29dc267f27 perf annotate TUI: Fix --show-total-period
We were showing the number of samples, not the total period, fix it.

Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1500500223-16753-1-git-send-email-treeze.taeung@gmail.com
[ extracted from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-28 12:53:06 -03:00
Arnaldo Carvalho de Melo bb79a232b0 perf annotate TUI: Use sym_hist_entry in disasm_line_samples
Just paving the way to fix --show-total-period in the TUI, i.e. now
we save in struct disasm_line_samples not just the number of samples,
but also the total period.

Based-on-a-patch-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-1sup5hkwrxocjvrmrmhs732o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-28 12:53:06 -03:00
Taeung Song 8158683da3 perf annotate: Rename 'sum' to 'nr_samples' in struct sym_hist
To make it more clear that it is the sum of all the nr_samples fields in the
addr[] entries, i.e.:

  sym_hist->nr_samples = sum(sym_hist->addr[0 ..  symbol__size(sym)]->nr_samples)

Committer notes:

Taeung had renamed it to total_samples, but using nr_samples, as in the
added explanation above, looks clearer and establishes the direct
connection, making clear it is about the _number_ of samples.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1500500211-16599-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-21 08:23:49 -03:00
Taeung Song 896bccd3cb perf annotate: Introduce struct sym_hist_entry
struct sym_hist has addr[] but it should have not only number of samples
but also the sample period.  So use new struct symhist_entry to pave the
way to have that.

Committer notes:

This initial patch will only introduce the struct sym_hist_entry and use
only the nr_samples member, which makes the code clearer and paves the
way to save the period as well.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1500500205-16553-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-21 08:23:38 -03:00
Arnaldo Carvalho de Melo 8e99b6d453 tools include: Adopt strstarts() from the kernel
Replacing prefixcmp(), same purpose, inverted result, so standardize on
the kernel variant, to reduce silly differences among tools/ and the
kernel sources, making it easier for people to work in both codebases.

And then doing:

	if (strstarts(option, "no-"))

Looks clearer than doing:

	if (!prefixcmp(option, "no-"))

To figure out if option starts witn "no-".

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kaei42gi7lpa8subwtv7eug8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-20 15:46:10 -03:00
Jin Yao 8b8ef2d74d perf report: Enable finding kernel inline functions
Currently perf supports a mode to query inline stack. It works well for
finding user space inline functions but it doesn't work for kernel ones,
due to some unnecessary check.

This patch removes these unnecessary checks. Now kernel inline functions
can be reported.

For example:

  perf report --inline -g func --stdio

  |--46.19%--do_huge_pmd_anonymous_page
  |          do_huge_pmd_anonymous_page (inline)
  |          __do_huge_pmd_anonymous_page (inline)
  |          __SetPageUptodate (inline)
  |          __set_bit (inline)

  The result is compared with the output of addr2line. They match.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500409892-15904-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-18 23:14:27 -03:00
Jin Yao 7e63a13a26 perf annotate: Implement visual marker for macro fusion
For marking fused instructions clearly this patch adds a line before the
first instruction of pair and joins it with the arrow of the jump to its
target.

For example, when "je" is selected in annotate view, the line before
cmpl is displayed and joins the arrow of "je".

       │   ┌──cmpl   $0x0,argp_program_version_hook
 81.93 │   ├──je     20
       │   │  lock   cmpxchg %esi,0x38a9a4(%rip)
       │   │↓ jne    29
       │   │↓ jmp    43
 11.47 │20:└─→cmpxch %esi,0x38a999(%rip)

That means the cmpl+je is a fused instruction pair and they should be
considered together.

Changelog:

v3: Use Arnaldo's fix to improve the arrow origin rendering.  To get the
    evsel->evlist->env->cpuid, save the evsel in annotate_browser.

v2: new function "ins__is_fused" to check if the instructions are fused.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1499403995-19857-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-18 23:13:49 -03:00
Jin Yao 69fb09f6cc perf annotate: Check for fused instructions
Macro fusion merges two instructions to a single micro-op. Intel core
platform performs this hardware optimization under limited
circumstances.

For example, CMP + JCC can be "fused" and executed /retired together.
While with sampling this can result in the sample sometimes being on the
JCC and sometimes on the CMP.  So for the fused instruction pair, they
could be considered together.

On Nehalem, fused instruction pairs:

  cmp/test + jcc.

On other new CPU:

  cmp/test/add/sub/and/inc/dec + jcc.

This patch adds an x86-specific function which checks if 2 instructions
are in a "fused" pair. For non-x86 arch, the function is just NULL.

Changelog:

v4: Move the CPU model checking to symbol__disassemble and save the CPU
    family/model in arch structure.

    It avoids checking every time when jump arrow printed.

v3: Add checking for Nehalem (CMP, TEST). For other newer Intel CPUs
    just check it by default (CMP, TEST, ADD, SUB, AND, INC, DEC).

v2: Remove the original weak function. Arnaldo points out that doing it
    as a weak function that will be overridden by the host arch doesn't
    work. So now it's implemented as an arch-specific function.

Committer fix:

Do not access evsel->evlist->env->cpuid, ->env can be null, introduce
perf_evsel__env_cpuid(), just like perf_evsel__env_arch(), also used in
this function call.

The original patch was segfaulting 'perf top' + annotation.

But this essentially disables this fused instructions augmentation in
'perf top', the right thing is to get the cpuid from the running kernel,
left for a later patch tho.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1499403995-19857-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-18 23:11:25 -03:00
Jin Yao 80f62589fa perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
When the jump instruction is displayed at the row 0 in annotate view,
the arrow is broken. An example:

 16.86 │   ┌──je     82
  0.01 │      movsd  (%rsp),%xmm0
       │      movsd  0x8(%rsp),%xmm4
       │      movsd  0x8(%rsp),%xmm1
       │      movsd  (%rsp),%xmm3
       │      divsd  %xmm4,%xmm0
       │      divsd  %xmm3,%xmm1
       │      movsd  (%rsp),%xmm2
       │      addsd  %xmm1,%xmm0
       │      addsd  %xmm2,%xmm0
       │      movsd  %xmm0,(%rsp)
       │82:   sub    $0x1,%ebx
 83.03 │    ↑ jne    38
       │      add    $0x10,%rsp
       │      xor    %eax,%eax
       │      pop    %rbx
       │    ← retq

The patch increments the row number before checking with 0.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes: 944e1abed9 ("perf ui browser: Add method to draw up/down arrow line")
Link: http://lkml.kernel.org/r/1496901704-30275-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-10 16:36:40 -03:00
Jin Yao dcaa394807 perf annotate: Return arch from symbol__disassemble() and save it in browser
In annotate browser, we will add support to check fused instructions.
While this is x86-specific feature so we need the annotate browser to
know what the arch it runs on.

symbol__disassemble() has figured out the arch. This patch just lets the
arch return from symbol__disassemble and save the arch in annotate
browser.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1497840958-4759-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 15:27:09 -03:00
Jin Yao ec27ae1892 perf annotate browser: Display titles in left frame
The annotate browser is divided into 2 frames. Left frame contains 3
columns (some platforms only have one column).

For example:

                   │26  int compute_flag()
                   │27  {
 22.80  1.20       │      sub    $0x8,%rsp
                   │25          int i;
                   │
                   │27          i = rand() % 2;
 22.78  1.20     1 │    → callq  rand@plt

While it's hard for user to understand what the data is.

This patch adds the titles "Percent", "IPC" and "Cycle" on columns.

Percent  IPC Cycle │
                   │25  __attribute__((noinline))
                   │26  int compute_flag()
                   │27  {
 22.80  1.20       │      sub    $0x8,%rsp
                   │25          int i;
                   │
                   │27          i = rand() % 2;
 22.78  1.20     1 │    → callq  rand@plt

The titles are displayed at row 0 of annotate browser if row 0 doesn't
have values of percent, ipc and cycle.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1493909895-9668-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 15:14:57 -03:00
Jin Yao c564f0db92 perf report: Remove unnecessary check in annotate_browser_write()
In annotate_browser_write(),

        if (dl->offset != -1 && percent_max != 0.0) {
                if (percent_max != 0.0) {
			...
                }
                ...
        }

The second check of (percent_max != 0.0) is not necessary, remove it.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1493909895-9668-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-19 15:14:57 -03:00
Namhyung Kim 7111ffff60 perf tools: Put caller above callee in --children mode
The __hpp__sort_acc() sorts entries using callchain depth in order to
put callers above in children mode.  But it assumed the callchain order
was callee-first.  Now default (for children) is caller-first so the
order of entries is reverted.

For example, consider following case:

  $ perf report --no-children
  ..l
  # Overhead  Command  Shared Object        Symbol
  # ........  .......  ...................  ..........................
  #
      99.44%  a.out    a.out                [.] main
              |
              ---main
                 __libc_start_main
                 _start

Then children mode should show 'start' above '__libc_start_main' since
it's the caller (parent) of the __libc_start_main.  But it's reversed:

  # Children      Self  Command  Shared Object    Symbol
  # ........  ........  .......  ...............  .....................
  #
      99.61%     0.00%  a.out    libc-2.25.so     [.] __libc_start_main
      99.61%     0.00%  a.out    a.out            [.] _start
      99.54%    99.44%  a.out    a.out            [.] main

This patch fixes it.

  # Children      Self  Command  Shared Object    Symbol
  # ........  ........  .......  ...............  .....................
  #
      99.61%     0.00%  a.out    a.out            [.] _start
      99.61%     0.00%  a.out    libc-2.25.so     [.] __libc_start_main
      99.54%    99.44%  a.out    a.out            [.] main

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-8-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-24 08:41:49 +02:00
Arnaldo Carvalho de Melo 5068b52f73 perf ui gtk: Move gtk .so name to the only place where it is used
No need to pollute util.h with this.

Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-kec0chbdtgrd71o3oi2kz2zt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 15:31:57 -03:00
Arnaldo Carvalho de Melo e7ff8920e6 perf tools: Use just forward declarations for struct thread where possible
Removing various instances of unnecessary includes, reducing the maze of
header dependencies.

Link: http://lkml.kernel.org/n/tip-hwu6eyuok9pc57alookyzmsf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24 13:43:35 -03:00
Arnaldo Carvalho de Melo 58db1d6e7d perf tools: Move units conversion/formatting routines to separate object
Out of util.h, to disentangle it a bit more.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vpksyj3w5fk9t8s6mxmkajyr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-20 13:22:44 -03:00
Arnaldo Carvalho de Melo 9607ad3a63 perf tools: Add signal.h to places using its definitions
And remove it from util.h, disentangling it a bit more.

Link: http://lkml.kernel.org/n/tip-2zg9s5nx90yde64j3g4z2uhk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-20 13:22:43 -03:00
Arnaldo Carvalho de Melo 76b31a29dd perf tools: Remove include dirent.h from util.h
The files using the dirent.h routines should instead include it,
reducing the includes hell that lead to longer build times.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-42g2f4z6nfg7mdb2ae97n7tj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:55 -03:00
Arnaldo Carvalho de Melo 9a3993d408 perf tools: Move path related functions to util/path.h
Disentangling util.h header mess a bit more.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-aj6je8ly377i4upedmjzdsq6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:53 -03:00
Arnaldo Carvalho de Melo b0742e90f5 perf tools: Don't include terminal handling headers in util.h
Continuing the disentanglement, mostly the TUI needs CTRL(c), that is
in sys/ttydefaults.h and term.c needs the termios headers.

And term.h needs to be added to a few places too.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-il19zna7qj9ytavdbwlipc7t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:53 -03:00
Arnaldo Carvalho de Melo a43783aeec perf tools: Include errno.h where needed
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:51 -03:00
Arnaldo Carvalho de Melo a067558e2f perf tools: Move extra string util functions to util/string2.h
Moving them from util.h, where they don't belong. Since libc already
have string.h, name it slightly differently, as string2.h.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eh3vz5sqxsrdd8lodoro4jrw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:51 -03:00
Arnaldo Carvalho de Melo 632a5cabea perf tools: Move srcline definitions to separate header
Out of util.h into a new file, srcline.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ludnlm4djqcdjziekzr4s3u9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:50 -03:00
Arnaldo Carvalho de Melo 3d689ed609 perf tools: Move sane ctype stuff from util.h to sane_ctype.h
More stuff that came from git, out of the hodge-podge that is util.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e3lana4gctz3ub4hn4y29hkw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:48 -03:00
Arnaldo Carvalho de Melo fd20e8111c perf tools: Including missing inttypes.h header
Needed to use the PRI[xu](32,64) formatting macros.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wkbho8kaw24q67dd11q0j39f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:46 -03:00
Arnaldo Carvalho de Melo 877a7a1105 perf tools: Add include <linux/kernel.h> where ARRAY_SIZE() is used
To pave the way for further cleanups where linux/kernel.h may stop being
included in some header.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:44 -03:00
Taeung Song e21600fd41 perf ui browser: Refactor the code to parse color configs with ltrim()
When parsing {fore, back} ground color configs, use ltrim() instead of
just while loop and isspace().

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1491575061-704-4-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-11 08:45:10 -03:00
Milian Wolff 5dfa210e40 perf report: Enable sorting by srcline as key
Often it is interesting to know how costly a given source line is in
total. Previously, one had to build these sums manually based on all
addresses that pointed to the same source line. This patch introduces
srcline as a sort key, which will do the aggregation for us.

Paired with the recent addition of showing inline frames, this makes
perf report much more useful for many C++ work loads.

The following shows the new feature in action. First, let's show the
status quo output when we sort by address. The result contains many hist
entries that generate the same output:

  ~~~~~~~~~~~~~~~~
  $ perf report --stdio --inline -g address
  # Children      Self  Command       Shared Object        Symbol
  # ........  ........  ............  ...................  .........................................
  #
      99.89%    35.34%  cpp-inlining  cpp-inlining         [.] main
            |
            |--64.55%--main complex:655
            |          /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
            |          /usr/include/c++/6.3.1/complex:664 (inline)
            |          |
            |          |--60.31%--hypot +20
            |          |          |
            |          |          |--8.52%--__hypot_finite +273
            |          |          |
            |          |          |--7.32%--__hypot_finite +411
...
             --35.34%--_start +4194346
                       __libc_start_main +241
                       |
                       |--6.65%--main random.tcc:3326
                       |          /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:185 (inline)
                       |
                       |--2.70%--main random.tcc:3326
                       |          /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:185 (inline)
                       |
                       |--1.69%--main random.tcc:3326
                       |          /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:185 (inline)
  ...
  ~~~~~~~~~~~~~~~~

With this patch and `-g srcline` we instead get the following output:

  ~~~~~~~~~~~~~~~~
  $ perf report --stdio --inline -g srcline
  # Children      Self  Command       Shared Object        Symbol
  # ........  ........  ............  ...................  .........................................
  #
      99.89%    35.34%  cpp-inlining  cpp-inlining         [.] main
            |
            |--64.55%--main complex:655
            |          /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
            |          /usr/include/c++/6.3.1/complex:664 (inline)
            |          |
            |          |--64.02%--hypot
            |          |          |
            |          |           --59.81%--__hypot_finite
            |          |
            |           --0.53%--cabs
            |
             --35.34%--_start
                       __libc_start_main
                       |
                       |--12.48%--main random.tcc:3326
                       |          /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
                       |          /usr/include/c++/6.3.1/bits/random.h:185 (inline)
  ...
  ~~~~~~~~~~~~~~~~

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170318214928.9047-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-27 12:13:28 -03:00
Jin Yao 0d3eb0b778 perf report: Show inline stack for browser mode
If the address belongs to an inlined function, the source information
back to the first non-inlined function will be printed.

For example:

1. Show inlined function name
   perf report -g function --inline

-    0.69%     0.00%  inline   ld-2.23.so           [.] dl_main
   - dl_main
        0.56% _dl_relocate_object
         _dl_relocate_object (inline)
         elf_dynamic_do_Rela (inline)

2. Show the file/line information
   perf report -g address --inline

-    0.69%     0.00%  inline   ld-2.23.so           [.] _dl_start
     _dl_start rtld.c:307
      /build/glibc-GKVZIf/glibc-2.23/elf/rtld.c:413 (inline)
   + _dl_sysdep_start dl-sysdep.c:250

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-6-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-27 12:12:59 -03:00
Jin Yao 0db64dd060 perf report: Show inline stack for stdio mode
If the address belongs to an inlined function, the source information
back to the first non-inlined function will be printed.

For example:

1. Show inlined function name
   perf report --stdio -g function --inline

     0.69%     0.00%  inline   ld-2.23.so           [.] dl_main
            |
            ---dl_main
               |
                --0.56%--_dl_relocate_object
                          _dl_relocate_object (inline)
                          elf_dynamic_do_Rela (inline)

2. Show the file/line information
   perf report --stdio -g address --inline

     0.69%     0.00%  inline   ld-2.23.so           [.] _dl_start_user
            |
            ---_dl_start_user .:0
               _dl_start rtld.c:307
               /build/glibc-GKVZIf/glibc-2.23/elf/rtld.c:413 (inline)
               _dl_sysdep_start dl-sysdep.c:250
               |
                --0.56%--dl_main rtld.c:2076

Committer tests:

  # perf record --call-graph dwarf ~/bin/perf stat usleep 1

 Performance counter stats for 'usleep 1':

          0.443020      task-clock (msec)         #    0.449 CPUs utilized
                 1      context-switches          #    0.002 M/sec
                 0      cpu-migrations            #    0.000 K/sec
                52      page-faults               #    0.117 M/sec
         1,049,423      cycles                    #    2.369 GHz
           801,456      instructions              #    0.76  insn per cycle
           155,609      branches                  #  351.246 M/sec
             7,026      branch-misses             #    4.52% of all branches

       0.000987570 seconds time elapsed

  [ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.553 MB perf.data (66 samples) ]
  # perf report --stdio --inline fs__get_mountpoint
  <SNIP>
     1.73%     0.00%  perf     perf           [.] fs__get_mountpoint
            |
            ---fs__get_mountpoint
               fs__get_mountpoint (inline)
               fs__check_mounts (inline)
               __statfs
               entry_SYSCALL_64
               sys_statfs
               SYSC_statfs
               user_statfs
               user_path_at_empty
               filename_lookup
               path_lookupat
               link_path_walk
               inode_permission
               __inode_permission
               kernfs_iop_permission
               kernfs_refresh_inode
               security_inode_notifysecctx
               selinux_inode_notifysecctx
               selinux_inode_setsecurity
               security_context_to_sid
               security_context_to_sid_core
               string_to_context_struct
               symcmp

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-5-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-27 12:02:22 -03:00
Changbin Du 3ef5b4023c perf hists browser: Fix typo in function switch_data_file
Should clear buf 'abs_path', not 'options'.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 341487ab56 ("perf hists browser: Add option for runtime switching perf data file")
Link: http://lkml.kernel.org/r/20170313114652.9207-1-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-13 11:58:57 -03:00
Namhyung Kim bb963e1650 perf utils: Check verbose flag properly
It now can have negative value to suppress the message entirely.  So it
needs to check it being positive.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-3-namhyung@kernel.org
[ Adjust fuzz on tools/perf/util/pmu.c, add > 0 checks in many other places ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-20 11:35:54 -03:00
Ingo Molnar 0fc6d1ca14 Merge branch 'perf/urgent' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-06 11:04:39 +01:00
Namhyung Kim a1c9f97f0b perf diff: Fix -o/--order option behavior (again)
Commit 21e6d84286 ("perf diff: Use perf_hpp__register_sort_field
interface") changed list_add() to perf_hpp__register_sort_field().

This resulted in a behavior change since the field was added to the tail
instead of the head.  So the -o option is mostly ignored due to its
order in the list.

This patch fixes it by adding perf_hpp__prepend_sort_field().

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 21e6d84286 ("perf diff: Use perf_hpp__register_sort_field interface")
Link: http://lkml.kernel.org/r/20170118051457.30946-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-02 11:39:09 -03:00
Namhyung Kim 8381cdd0e3 perf diff: Fix segfault on 'perf diff -o N' option
The -o/--order option is to select column number to sort a diff result.

It does the job by adding a hpp field at the beginning of the sort list.
But it should not be added to the output field list as it has no
callbacks required by a output field.

During the setup_sorting(), the perf_hpp__setup_output_field() appends
the given sort keys to the output field if it's not there already.

Originally it was checked by fmt->list being non-empty.  But commit
3f931f2c42 ("perf hists: Make hpp setup function generic") changed it
to check the ->equal callback.

Anyways, we don't need to add the pseudo hpp field to the output field
list since it won't be used for output.  So just skip fields if they
have no ->color or ->entry callbacks.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 3f931f2c42 ("perf hists: Make hpp setup function generic")
Link: http://lkml.kernel.org/r/20170118051457.30946-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-02 11:39:04 -03:00
Jiri Olsa 0e3fa7a7ac perf hists browser: Add e/c hotkeys to expand/collapse callchain for current entry
Currently we allow only to expand or collapse all entries in the browser
with 'E' or 'C' keys. Allow user to expand or collapse only current
entry in the browser with e or c key.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1484904032-11040-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-20 13:37:26 -03:00
Jiri Olsa b33f922651 perf hists browser: Put hist_entry folding logic into single function
It will be used in following patch to expand or collapse only the
current browser entry.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1484904032-11040-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-20 10:04:45 -03:00
Soramichi AKIYAMA d25ed5d9fa perf tools: Move two variables usied in libperf from perf.c
The use_browser and perf_version_string variables are both declared in
perf.c but they are also referenced by other functions of libperf.a.

Therefore a user linking an own main() with libperf.a must declare those
two variables in their files even if the files never use the browser or
the version information.

This patch fixes this issue by moving use_browser and
perf_version_string out of perf.c to some other files.

Signed-off-by: Soramichi Akiyama <akiyama@m.soramichi.jp>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170117002237.c1aec0ce3b4d675dca018deb@m.soramichi.jp
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-17 11:36:45 -03:00
Ravi Bangoria e216874cc1 perf annotate: Fix jump target outside of function address range
If jump target is outside of function range, perf is not handling it
correctly. Especially when target address is lesser than function start
address, target offset will be negative. But, target address declared to
be unsigned, converts negative number into 2's complement. See below
example. Here target of 'jumpq' instruction at 34cf8 is 34ac0 which is
lesser than function start address(34cf0).

        34ac0 - 34cf0 = -0x230 = 0xfffffffffffffdd0

Objdump output:

  0000000000034cf0 <__sigaction>:
  __GI___sigaction():
    34cf0: lea    -0x20(%rdi),%eax
    34cf3: cmp    -bashx1,%eax
    34cf6: jbe    34d00 <__sigaction+0x10>
    34cf8: jmpq   34ac0 <__GI___libc_sigaction>
    34cfd: nopl   (%rax)
    34d00: mov    0x386161(%rip),%rax        # 3bae68 <_DYNAMIC+0x2e8>
    34d07: movl   -bashx16,%fs:(%rax)
    34d0e: mov    -bashxffffffff,%eax
    34d13: retq

perf annotate before applying patch:

  __GI___sigaction  /usr/lib64/libc-2.22.so
           lea    -0x20(%rdi),%eax
           cmp    -bashx1,%eax
        v  jbe    10
        v  jmpq   fffffffffffffdd0
           nop
    10:    mov    _DYNAMIC+0x2e8,%rax
           movl   -bashx16,%fs:(%rax)
           mov    -bashxffffffff,%eax
           retq

perf annotate after applying patch:

  __GI___sigaction  /usr/lib64/libc-2.22.so
           lea    -0x20(%rdi),%eax
           cmp    -bashx1,%eax
        v  jbe    10
        ^  jmpq   34ac0 <__GI___libc_sigaction>
           nop
    10:    mov    _DYNAMIC+0x2e8,%rax
           movl   -bashx16,%fs:(%rax)
           mov    -bashxffffffff,%eax
           retq

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1480953407-7605-3-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15 16:25:46 -03:00
Arnaldo Carvalho de Melo 5252b1aeab perf annotate: Show invalid jump offset in error message
To help in debugging when the wrong offset is being used, like in:

       │13d98: ↓ jne    13dd1 <lzma_lzma_preset@@XZ_5.0+0x28e1>

That is the full line from objdump, and it seems what should be used is
13dd1, not 28e1.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4nc0marsgst1ft6inmvqber7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-25 15:56:34 -03:00
Arnaldo Carvalho de Melo 9484b86e9c perf ui helpline: Provide a printf variant
To print some values, like in the annotation code with invalid jump
offsets.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1vk0g5twas2ioswn1mmvnvwq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-25 15:49:16 -03:00
Arnaldo Carvalho de Melo 75b49202d8 perf annotate: Remove duplicate 'name' field from disasm_line
The disasm_line::name field is always equal to ins::name, being used
just to locate the instruction's ins_ops from the per-arch instructions
table.

Eliminate this duplication, nuking that field and instead make
ins__find() return an ins_ops, store it in disasm_line::ins.ops, and
keep just in disasm_line::ins.name what was in disasm_line::name, this
way we end up not keeping a reference to entries in the per-arch
instructions table.

This in turn will help supporting multiple ways to manage the per-arch
instructions table, allowing resorting that array, for instance, when
the entries will move after references to its addresses were made. The
same problem is avoided when one grows the array with realloc.

So architectures simply keeping a constant array will work as well as
architectures building the table using regular expressions or other
logic that involves resorting the table.

Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vr899azvabnw9gtuepuqfd9t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-25 10:24:16 -03:00
Ingo Molnar 47414424c5 perf/core improvements and fixes:
New tool:
 
 - 'perf sched timehist' provides an analysis of scheduling events.
 
   Example usage:
       perf sched record -- sleep 1
       perf sched timehist
 
   By default it shows the individual schedule events, including the wait
   time (time between sched-out and next sched-in events for the task), the
   task scheduling delay (time between wakeup and actually running) and run
   time for the task:
 
         time    cpu  task name         wait time  sch delay  run time
                      [tid/pid]            (msec)     (msec)    (msec)
     -------- ------  ----------------  ---------  ---------  --------
     1.874569 [0011]  gcc[31949]            0.014      0.000     1.148
     1.874591 [0010]  gcc[31951]            0.000      0.000     0.024
     1.874603 [0010]  migration/10[59]      3.350      0.004     0.011
     1.874604 [0011]  <idle>                1.148      0.000     0.035
     1.874723 [0005]  <idle>                0.016      0.000     1.383
     1.874746 [0005]  gcc[31949]            0.153      0.078     0.022
   ...
 
   Times are in msec.usec. (David Ahern, Namhyung Kim)
 
 Improvements:
 
 - Make 'perf c2c report' support -f/--force, to allow skipping the
   ownership check for root users, for instance, just like the other
   tools (Jiri Olsa)
 
 - Allow sorting cachelines by total number of HITMs, in addition to
   local and remote numbers (Jiri Olsa)
 
 Fixes:
 
 - Make sure errors aren't suppressed by the TUI reset at the end of
   a 'perf c2c report' session (Jiri Olsa)
 
 Infrastructure:
 
 - Initial work on having the annotate code better support multiple
   architectures, including the ability to cross-annotate, i.e. to
   annotate perf.data files collected on an ARM system on a x86_64
   workstation (Arnaldo Carvalho de Melo, Ravi Bangoria, Kim Phillips)
 
 - Use USECS_PER_SEC instead of hard coded number in libtraceevent (Steven Rostedt)
 
 - Add retrieval of preempt count and latency flags in libtraceevent (Steven Rostedt)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYNbr5AAoJENZQFvNTUqpAnq0P/1SkKcxUdjXHt59P9s1GH1W2
 VDDGdRMVG8IkhzNpVX7ojQ48rC/04e/QooFaASoMV9ySUI1V5aDi1JjcpSSqvEw7
 I4DobaJLwebqUJUP2LteoNAuX0UVq6jWUXFDCzeN9yAfoQ9qTNgejLtOACrQd32n
 l4FxyFvfrdhmy4I95Aa+1VaBGEOwzXmkr0h7DcGenYoKsO6lPJ/WtBhVtqvcq26G
 PtYhD2UZMmDhLfPy6kZffIfNtkJExeSqVkdoHYtt9cpvVO6JZdjfHVsvHc6TxW4f
 GXnHEC65Q7Gu2xRLPdaNYDXD9C7LZcOITnIwKt9GfCx2RV6nhVT2H7qnZM0xMP1l
 +362wIx9KJ628l/Q7SWQTjnL2a2yG4sCqNluSQizokYlUXvKOHfDzwT3TRy9QzVz
 H+mCL4f7eb8rZINRswVi7hi/KeQnLpUgNbJe9XCLdsCdA/lJeJ4kUcU52Nnx/Kp5
 nX7A+6KFthijJuAS0dFLsyi+t8Ln7TeeoDJ6n1REVwp7zNUBj+yQtOPNFKsPnaAq
 VFDpSkBxMHOC8vW2Dz1x7zkINjLsoOsc1Z3E5slc/ZAKfKeKyukCd0YDZitvIwuf
 67daqhoUtw4Gu9M5hKGx2jGy5osMlY9zzSBe/nENZGzcoLPBrHhCuV/w3IOKzLjY
 9EoFDSM2l34ihMGZliSa
 =gL8a
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-20161123' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New tool:

- 'perf sched timehist' provides an analysis of scheduling events.

  Example usage:
      perf sched record -- sleep 1
      perf sched timehist

  By default it shows the individual schedule events, including the wait
  time (time between sched-out and next sched-in events for the task), the
  task scheduling delay (time between wakeup and actually running) and run
  time for the task:

        time    cpu  task name         wait time  sch delay  run time
                     [tid/pid]            (msec)     (msec)    (msec)
    -------- ------  ----------------  ---------  ---------  --------
    1.874569 [0011]  gcc[31949]            0.014      0.000     1.148
    1.874591 [0010]  gcc[31951]            0.000      0.000     0.024
    1.874603 [0010]  migration/10[59]      3.350      0.004     0.011
    1.874604 [0011]  <idle>                1.148      0.000     0.035
    1.874723 [0005]  <idle>                0.016      0.000     1.383
    1.874746 [0005]  gcc[31949]            0.153      0.078     0.022
  ...

  Times are in msec.usec. (David Ahern, Namhyung Kim)

Improvements:

- Make 'perf c2c report' support -f/--force, to allow skipping the
  ownership check for root users, for instance, just like the other
  tools (Jiri Olsa)

- Allow sorting cachelines by total number of HITMs, in addition to
  local and remote numbers (Jiri Olsa)

Fixes:

- Make sure errors aren't suppressed by the TUI reset at the end of
  a 'perf c2c report' session (Jiri Olsa)

Infrastructure changes:

- Initial work on having the annotate code better support multiple
  architectures, including the ability to cross-annotate, i.e. to
  annotate perf.data files collected on an ARM system on a x86_64
  workstation (Arnaldo Carvalho de Melo, Ravi Bangoria, Kim Phillips)

- Use USECS_PER_SEC instead of hard coded number in libtraceevent (Steven Rostedt)

- Add retrieval of preempt count and latency flags in libtraceevent (Steven Rostedt)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-24 05:09:31 +01:00
Ingo Molnar 69e6cdd0cf Merge branch 'linus' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-24 05:09:08 +01:00
Arnaldo Carvalho de Melo 786c1b5184 perf annotate: Start supporting cross arch annotation
Introduce a 'struct arch', where arch specific stuff will live, starting
with objdump's choice of comment delimitation character, that is '#' in
x86 while a ';' in arm.

This has some bits and pieces from a patch submitted by Ravi.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-f337tzjjcl8vtapgvjxmhrbx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-17 17:12:50 -03:00
Jin Yao fef51ecd10 perf report: Show branch info in callchain entry for browser mode
If the branch is 100% predicted then the "predicted" is hidden.
Similarly, if there is no branch tsx abort, the "abort" is hidden.
There is only cycles shown (cycle is supported on skylake platform,
older platform would be 0).

If no iterations, the "iterations" is hidden.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1477876794-30749-6-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-14 13:34:08 -03:00
Jin Yao 8577ae6b04 perf report: Show branch info in callchain entry for stdio mode
If the branch is 100% predicted then the "predicted" is hidden.
Similarly, if there is no branch tsx abort, the "abort" is hidden.
There is only cycles shown (cycle is supported on skylake platform,
older platform would be 0).

If no iterations, the "iterations" is hidden.

For example:

|--29.93%--main div.c:39 (predicted:50.6%, cycles:1, iterations:18)
|          main div.c:44 (predicted:50.6%, cycles:1)
|          |
|           --22.69%--main div.c:42 (cycles:2, iterations:17)
|                     compute_flag div.c:28 (cycles:2)
|                     |
|                      --10.52%--compute_flag div.c:27 (cycles:1)
|                                rand rand.c:28 (cycles:1)
|                                rand rand.c:28 (cycles:1)
|                                __random random.c:298 (cycles:1)
|                                __random random.c:297 (cycles:1)
|                                __random random.c:295 (cycles:1)
|                                __random random.c:295 (cycles:1)
|                                __random random.c:295 (cycles:1)
|                                __random random.c:295 (cycles:6)

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1477876794-30749-5-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-14 13:33:47 -03:00
Namhyung Kim b9bf911e99 perf hists browser: Fix column indentation on --hierarchy
When horizontall scrolling is used in hierarchy mode, the the right most
column has unnecessary indentation.  Actually it's needed only if some
of left (overhead) columns were shown.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161108130833.9263-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-09 11:45:58 -03:00
Namhyung Kim 131d51eb1d perf hists browser: Show folded sign properly on --hierarchy
When horizontal scrolling is used in hierarchy mode, the folded signed
disappears at the right most column.

Committer note:

To test it, run 'perf top --hierarchy, see the '+' symbol at the first
column, then press the right arrow key, the '+' symbol will disappear,
this patch fixes that.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161108130833.9263-3-namhyung@kernel.org
[ Move 'width -= 2' invariant to right after the if/else ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-09 11:30:47 -03:00
Namhyung Kim 3d9f468392 perf hists browser: Fix indentation of folded sign on --hierarchy
It should indent 2 spaces for folded sign and a whitespace.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161108130833.9263-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-09 11:20:56 -03:00
Namhyung Kim 9cba984454 perf hist browser: Fix hierarchy column counts
The perf report/top on TUI supports horizontal scrolling using LEFT and
RIGHT keys.

But it calculate the number of columns incorrectly when hierarchy mode
is enabled so that keep pressing RIGHT key can make the output
disappeared.

In the hierarchy mode, all sort keys are collapsed into a single column,
so it needs to be applied when calculating column numbers.

Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161024162110.17918-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-09 11:19:28 -03:00
Namhyung Kim 8a06b0be65 perf hist browser: Fix hierarchy column counts
The perf report/top on TUI supports horizontal scrolling using LEFT and
RIGHT keys.

But it calculate the number of columns incorrectly when hierarchy mode
is enabled so that keep pressing RIGHT key can make the output
disappeared.

In the hierarchy mode, all sort keys are collapsed into a single column,
so it needs to be applied when calculating column numbers.

Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161024162110.17918-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-25 09:52:49 -03:00
Alexis Berlemont 21e8c81095 perf hists browser: Dynamically change verbosity level
Here is a small patch which tries to fulfill a point in the perf todo
list:

* Make pressing 'V' multiple times to go on cycling thru various
  verbosity levels in 'perf top', so that info that is present in
  'perf top -v' can be obtained without having to restart the tool
  (acme).

After a small grep in the code, the max verbosity level seems 3; so,
we cycle at 4; I did not dare define a MAX_VERBOSE_LEVEL constant.

Signed-off-by: Alexis Berlemont <alexis.berlemont@gmail.com>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161012214823.14324-2-alexis.berlemont@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-24 11:07:42 -03:00
Jiri Olsa 5a1a99cd2e perf c2c report: Add main TUI browser
Add the main cachelines TUI browser. It allows to navigate through
cachelines and display their details and callchains (implemented in the
following patches).

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-pk632k4h1uwc5t0lqc7k61zg@git.kernel.org
Link: http://lkml.kernel.org/r/20161021001706.GB23970@krava
[ Handle file with no entries, fixing segfault reported by Kim Phillips ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-21 10:30:03 -03:00
Namhyung Kim c611152373 perf top: Fix refreshing hierarchy entries on TUI
Markus reported that 'perf top --hierarchy' cannot scroll down after
refresh.  This was because the number of entries are not updated when
hierarchy is enabled.

Unlike normal report view, hierarchy mode needs to keep its own entry
count since it can have non-leaf entries which can expand/collapse.

Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: f5b763feeb ("perf hists browser: Count number of hierarchy entries")
Link: http://lkml.kernel.org/r/20161007050412.3000-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-13 11:10:14 -03:00
Jiri Olsa 2d83145414 perf hists: Make hists__fprintf_headers function global
Will be used from external places in the upcoming c2c patch series.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22 13:08:59 -03:00
Jiri Olsa bd28d0c598 perf hists: Make __hist_entry__snprintf function global
Will be used from external places in the upcoming c2c patch series.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22 13:08:58 -03:00
Jiri Olsa 98ba160929 perf tools: Make several display functions global
Will be used from external places in the upcoming c2c patch series.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22 13:08:58 -03:00
Jiri Olsa 9da44db149 perf hists: Add __hist_entry__snprintf function
Add __hist_entry__snprintf() to take a perf_hpp_list as an argument
instead of using he->hists->hpp_list.

This way we can display arbitrary list of entries regardless of the
hists setup, which will be useful in the upcoming c2c patch series.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22 13:08:56 -03:00
Jiri Olsa d5278220be perf hists: Use bigger buffer for stdio headers
With node column on big CPUs servers we can run out of stdio header
space quite soon. Enlarging header buffer.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474290610-23241-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-21 12:14:59 -03:00
Namhyung Kim e3b60bc93d perf hists: Factor out hists__reset_column_width()
The stdio and tui has same code to reset hpp format column width.
Factor it out as a new function.

Suggested-and-Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160920053025.13989-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-20 16:13:37 -03:00
Namhyung Kim 5ff3e7a224 perf ui/tui: Reset output width for hierarchy
When --hierarchy option is used, each entry has its own hpp_list to show
the result.  But it missed to update width of each column.

Before:

  - 46.29% 48.12%        netctl-auto
     + 31.44% 29.25%        [kernel.vmlinux]
     + 8.52% 11.55%        libc-2.22.so
     + 5.19% 6.91%        bash
  + 10.75% 11.83%        wpa_cli
  + 8.25% 2.23%        swapper
  + 6.45% 5.40%        tr
  + 4.81% 8.09%        awk
  + 4.15% 2.85%        firefox
  + 3.86% 2.53%        sh

After:

  -  46.29%  48.12%        netctl-auto
      +  31.44%  29.25%        [kernel.vmlinux]
      +   8.52%  11.55%        libc-2.22.so
      +   5.19%   6.91%        bash
  +  10.75%  11.83%        wpa_cli
  +   8.25%   2.23%        swapper
  +   6.45%   5.40%        tr
  +   4.81%   8.09%        awk
  +   4.15%   2.85%        firefox
  +   3.86%   2.53%        sh

Committer note:

Full testing instructions:

1) Record with an event group:

  $ perf record -e '{cycles,instructions}' make -j4

2) Use report in hierarchy mode, to get a few expanded trees on
   the same screen, use --percent-limit:

  $ perf report --hierarchy --percent-limit 0.5

Samples: 103K of event 'anon group { cycles:u, instructions:u }',
Event count (approx.): 57317631725
         Overhead        Command / Shared Object / Symbol        ◆
-  58.89%  55.12%        cc1                                     ▒
   -  50.26%  48.10%        cc1                                  ▒
          3.61%   5.13%        [.] _cpp_lex_token                ▒
          2.58%   0.78%        [.] ht_lookup_with_hash           ▒
          1.31%   1.30%        [.] ggc_internal_alloc            ▒
          1.08%   2.25%        [.] get_combined_adhoc_loc        ▒
          1.01%   1.95%        [.] ira_init                      ▒
          0.96%   1.78%        [.] linemap_position_for_column   ▒
          0.65%   1.01%        [.] cpp_get_token_with_location   ▒
   -   7.52%   6.58%        libc-2.23.so                         ▒
          1.70%   1.78%        [.] _int_malloc                   ▒
          0.69%   0.75%        [.] _int_free                     ▒
          0.67%   0.42%        [.] malloc_consolidate            ▒
   -   0.58%   0.42%        ld-2.23.so                           ▒
                               no entry >= 0.50%                 ▒
   -   0.52%   0.03%        [kernel.vmlinux]                     ▒
                               no entry >= 0.50%                 ▒

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 1b2dbbf41a ("perf hists: Use own hpp_list for hierarchy mode")
Link: http://lkml.kernel.org/r/20160920053025.13989-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-20 16:08:30 -03:00
Namhyung Kim 195bc0f844 perf ui/stdio: Rename print_hierarchy_header()
Now the hists__fprintf_hierarchy_headers() is a simple wrapper passing
field separator.  Let's do it directly.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160913074552.13284-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-13 16:41:36 -03:00
Namhyung Kim 9a6ad25b5a perf ui/stdio: Always reset output width for hierarchy
When the --hierarchy option is used, each entry has its own hpp_list to
show the result.  But it is not updating the width of each column for
perf-top.  The perf-report command has no problem since it resets it
during header display.

  $ sudo perf top --hierarchy --stdio

   PerfTop:     160 irqs/sec  kernel:38.8%  exact: 100.0%
                                     [4000Hz cycles:pp],  (all, 12 CPUs)
  ----------------------------------------------------------------------

   52.32%     perf
      24.74%     [.] __symbols__insert
      5.62%     [.] rb_next
      5.14%     [.] dso__load_sym

Move the code into hists__fprintf() so that it can be called always.
Also it'd be better to put similar code together.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 1b2dbbf41a ("perf hists: Use own hpp_list for hierarchy mode")
Link: http://lkml.kernel.org/r/20160913074552.13284-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-13 16:41:21 -03:00
Namhyung Kim d9ea48bc4e perf hists browser: Fix event group display
Milian reported that the event group on TUI shows duplicated overhead.
This was due to a bug on calculating hpp->buf position.  The
hpp_advance() was called from __hpp__slsmg_color_printf() on TUI but
it's already called from the hpp__call_print_fn macro in __hpp__fmt().
The end result is that the print function returns number of bytes it
printed but the buffer advanced twice of the length.

This is generally not a problem since it doesn't need to access the
buffer again.  But with event group, overhead needs to be printed
multiple times and hist_entry__snprintf_alignment() tries to fill the
space with buffer after it printed.  So it (brokenly) showed the last
overhead again.

The bug was there from the beginning, but I think it's only revealed
when the alignment function was added.

Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 89fee70943 ("perf hists: Do column alignment on the format iterator")
Link: http://lkml.kernel.org/r/20160912061958.16656-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-12 11:10:26 -03:00
Arnaldo Carvalho de Melo be39db9f29 perf symbols: Remove symbol_filter_t machinery
We're not using it anymore, few users were, but we really could do
without it, simplify lots of functions by removing it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1zng8wdznn00iiz08bb7q3vn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-05 11:14:50 -03:00
Colin Ian King 6637e6f1ac perf hists browser: Remove superfluous null check on map
'map' is being already checked if it is NULL at the start of
do_zoom_dso(), so the second subsequent check is superfluous and can be
removed.

Signed-off-by: Colin King <colin.king@canonical.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1471278343-14999-1-git-send-email-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23 15:37:33 -03:00
Jiri Olsa 29659ab4e7 perf hists: Add support for header span
Add span argument for header callback function.

The handling of this argument is completely in the hands of the
callback. The only thing the caller ensures is it's zeroed on the
beginning.

Omitting span skipping in hierarchy headers and gtk code.

The c2c code use this to span header lines based on the entries span
configuration.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23 15:37:33 -03:00
Jiri Olsa f3705b062e perf tools stdio: Display multiple header lines
Display multiple header lines in stdio output , if it's configured
within struct perf_hpp_list::nr_header_lines.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23 15:37:33 -03:00
Jiri Olsa 69705b3585 perf tools tui: Display multiple header lines
Display multiple header lines in TUI browser, if it's configured within
struct perf_hpp_list::nr_header_lines.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23 15:37:33 -03:00
Jiri Olsa 74bb43f29e perf hists: Add line argument into perf_hpp_fmt's header callback
Adding line argument into perf_hpp_fmt's header callback to be able to
request specific header line.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23 15:37:33 -03:00
Jiri Olsa f8e6710de8 perf hists: Introduce nr_header_lines into struct perf_hpp_list
Currently we support just single line headers, this is first step to
allow more.

Store the number of header lines in perf_hpp_list, which encompasses all
the display/sort entries and is thus suitable to hold this value.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23 15:37:33 -03:00
Arnaldo Carvalho de Melo ee51d85139 perf annotate: Introduce strerror for handling symbol__disassemble() errors
We were just using pr_error() which makes it difficult for non stdio UIs
to provide errors using its widgets, as they need to somehow catch what
was passed to pr_error().

Fix it by introducing a __strerror() interface like the ones used
elsewhere, for instance target__strerror().

This is just the initial step, more work will be done, but first some
error handling bugs noticed while working on this need to be dealt with.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dgd22zl2xg7x4vcnoa83jxfb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-01 18:18:16 -03:00
Arnaldo Carvalho de Melo 5cb725a972 perf annotate: Rename symbol__annotate() to symbol__disassemble()
This function will not annotate anything, it will just disassembly the
given map->dso and symbol.

It currently does this by parsing the output of 'objdump --disassemble',
but this could conceivably be done using a library or an offshot of
the kernel's instruction decoder (arch/x86/lib/inat.c), etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2xpfl4bfnrd6x584b390qok7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-01 17:06:46 -03:00
Arnaldo Carvalho de Melo 175729fc2c perf tools: Remove needless includes from cache.h
The cache.h header doesn't use any of the definitions in some of the
headers it includes, ditch them and fix the fallout, where files were
getting stuff they needed just because they were including it, sometimes
not using what it really exports at all.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-l6r2bmj8h1g3e01wr981on0n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:58 -03:00
Arnaldo Carvalho de Melo c8b5f2c96d tools: Introduce str_error_r()
The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.

But that, besides being tricky in cases where we expect that the
function using strerror_r() returns the error formatted in a provided
buffer (we have to check if it returned something else and copy that
instead), breaks the build on systems not using glibc, like Alpine
Linux, where musl libc is used.

So, introduce yet another wrapper, str_error_r(), that has the GNU
interface, but uses the portable XSI variant of strerror_r(), so that
users rest asured that the provided buffer is used and it is what is
returned.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:47 -03:00
Arnaldo Carvalho de Melo c09615f29c perf ui stdio: Add way to setup the color output mode selection
In --stdio we turn off color output when the output is not a tty,
which is not always desirable, for instance, in:

  perf annotate | more

the 'more' tool is perfectly capable of processing the escape sequences
for colored output.

Allow using the existing logic for .perfconfig's "color.ui" to be used
from the command line by providing a stdio__config_color() helper, that
will be used by annotate and report in follow up patches.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1u4wjdbcc41dxndsb4klpa9y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Naveen N. Rao 6ef9492915 perf annotate: Generalize handling of 'ret' instructions
Introduce helper to detect 'ret' instructions and use the same in the TUI.
A helper is needed since some architectures such as powerpc have more
than one return instruction.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/1466769240-12376-5-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-27 14:25:05 -03:00
Arnaldo Carvalho de Melo e5cadb93d0 perf evlist: Rename for_each() macros to for_each_entry()
To match the semantics for list.h in the kernel, that are used to
implement those macros.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 11:26:15 -03:00
Taeung Song 41840d211c perf config: Move config declarations from util/cache.h to util/config.h
Lately util/config.h has been added but util/cache.h has declarations of
functions and a global variable for config features.

To manage codes about configuration at one spot, move them to
util/config.h and let source files that need config features include
config.h And if the source files that included previous cache.h need
only config.h, remove including cache.h.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466672119-4852-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 08:51:41 -03:00
Jiri Olsa fcd8642650 perf hists browser: Introduce init()
Factoring out the hist_browser initialization code, so it could be used
from other parts in following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:35 -03:00
Jiri Olsa a6ec894dea perf hists browser: Introduce perf_evsel_browser constructor
So we could use hist_browser__new for generic hist browser in following
patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:35 -03:00
Jiri Olsa b1c7a8f7a1 perf hists browser: Move horizontal scroll init to new()
Moving horizontal scroll init to initialization function as already
intended.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:35 -03:00
Jiri Olsa 5b91a86f47 perf hists browser: Introduce struct hist_browser title callback
We can now setup title callback for hist_browser, which will be useful
in following changes to create customized hist_browsers.

This also separates struct perf_evsel dependency out of hist_browser
basic code.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:34 -03:00
Jiri Olsa dabd201239 perf hists browser: Make (new|delete|run) public
This way we can use it outside of ui/browsers/hists.c and extend it in
following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:34 -03:00
Jiri Olsa f758990f25 perf hists browser: Move hist_browser into header file
This way we can use it outside of ui/browsers/hists.c and extend it in
following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:34 -03:00
Jiri Olsa da1b0407c8 perf hists: Replace perf_evsel arg perf_hpp_fmt's width callback
Replacing perf_evsel arg perf_hpp_fmt's width callback with hists
object.

This will be helpful in future for non evsel related hist browsers.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:50:04 -03:00
Jiri Olsa 0537217360 perf hists: Replace perf_evsel arg perf_hpp_fmt's header callback
Replacing perf_evsel arg perf_hpp_fmt's header callback with hists
object.

None of the actual callbacks actually use evsel object, also this will
be helpful in future for non evsel related hist browsers.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:49:18 -03:00
Jiri Olsa d05e3aaeea perf stdio: Add use_callchain parameter to hists__fprintf
It will be convenient in following patches to display hists entries
without callchains even if they are defined.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:48:02 -03:00
Jiri Olsa 8f1d1b4452 perf stdio: Do not pass hists in hist_entry__fprintf
There's no need, we have the hists pointer in struct hist_entry.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:47:11 -03:00
Jiri Olsa 7a72a2e5e6 perf stdio: Separate standard headers output
Introducing hists__fprintf_standard_headers function to separate
standard headers display code.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:46:39 -03:00
Jiri Olsa 5c854f3793 perf stdio: Separate hierarchy headers output
Introducing hists__fprintf_hierarchy_headers function to separate
hierarchy headers display code.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:46:02 -03:00
Jiri Olsa 36592ebb73 perf stdio: Separate headers output
Introducing hists__fprintf_headers function to separate the code that
displays headers.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:44:26 -03:00
Jiri Olsa 01b4770d56 perf tui: Separate hierarchy and standard headers output
It will be useful for future changes that enhance headers with multiple
lines and span columns, which don't affect hierarchy headers.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:44:22 -03:00
Jiri Olsa 7cecb7fe83 perf hists: Move sort__has_comm into struct perf_hpp_list
Now we have sort dimensions private for struct hists,
we need to make dimension booleans hists specific as
well.

Moving sort__has_comm into struct perf_hpp_list.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05 21:04:02 -03:00
Jiri Olsa fa82911a1b perf hists: Move sort__has_thread into struct perf_hpp_list
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.

Moving sort__has_thread into struct perf_hpp_list.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05 21:04:01 -03:00
Jiri Olsa 35a634f76c perf hists: Move sort__has_socket into struct perf_hpp_list
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.

Moving sort__has_socket into struct perf_hpp_list.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05 21:04:01 -03:00
Jiri Olsa 69849fc5d2 perf hists: Move sort__has_dso into struct perf_hpp_list
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.

Moving sort__has_dso into struct perf_hpp_list.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05 21:04:00 -03:00
Jiri Olsa 2e0453af4e perf hists: Move sort__has_sym into struct perf_hpp_list
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.

Moving sort__has_sym into struct perf_hpp_list.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05 21:03:59 -03:00
Arnaldo Carvalho de Melo 1b6b678ecf perf hists browser: Fold two consecutive symbol_conf.use_callchain ifs
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-u701i6qpecgm9jiat52i8l98@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-18 12:26:27 -03:00
Jiri Olsa 7d6a7e7825 perf tools: Introduce trim function
To be used in cases for both sides trim.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andreas Hollmann <hollmann@in.tum.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460013073-18444-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-07 10:21:49 -03:00
Andres Freund 9098903555 perf hists: Fix determination of a callchain node's childlessness
The 4b3a321223 ("perf hists browser: Support flat callchains") commit
over-aggressively tried to optimize callchain_node__init_have_children().

That lead to --tui mode not allowing to expand call chain elements if a
call chain element had only one parent. That's why --inverted callgraphs
looked halfway sane, but plain ones didn't.

Revert that individual optimization, it wasn't really related to the
rest of the commit.

Signed-off-by: Andres Freund <andres@anarazel.de>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 4b3a321223 ("perf hists browser: Support flat callchains")
Link: http://lkml.kernel.org/r/20160330190245.GB13305@awork2.anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-30 18:08:39 -03:00
Arnaldo Carvalho de Melo b8f8eb84f4 perf tools: Remove misplaced __maybe_unused
All over the tree.

Cc: David Ahern <dsahern@gmail.com>
cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-8nzhnokxyp8y4v7gf0j00oyb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-23 12:03:04 -03:00
Namhyung Kim 599a2f38a9 perf hists browser: Check sort keys before hot key actions
The context menu in TUI hists browser checks corresponding sort keys
when creating the menu item.  But hotkey actions lacks these checks so
it can filter using incorrect info.

For example, default sort key of 'perf top' doesn't contain 'comm' or
'pid' sort key so each hist entry's thread info is not reliable.  Thus
it should prohibit using thread filter on 't' key.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457533253-21419-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10 16:48:02 -03:00
Namhyung Kim 6962ccb37b perf hists browser: Allow thread filtering for comm sort key
The commit 2eafd410e6 ("perf hists browser: Only 'Zoom into thread'
only when sort order has 'pid'") disabled thread filtering in hist
browser for the default sort key.  However the he->thread is still valid
even if 'pid' sort key is not given.  Only thing it should not use is
the pid (or tid) of the thread.  So allow to filter by thread when
'comm' sort key is given and show pid only if 'pid' sort key is given.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457536490-24084-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10 16:47:37 -03:00
Namhyung Kim 86e3ee5224 perf tools: Remove nr_sort_keys field
The nr_sort_keys field is to carry the number of sort entries in a
hpp_list or hists to determine the depth of indentation of a hist entry.
As it's only used in hierarchy mode and now we have used nr_hpp_node for
this reason, there's no need to keep it anymore.  Let's get rid of it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10 16:46:08 -03:00
Namhyung Kim 325a62834e perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry()
The hist_browser__fprintf_hierarchy_entry() if to dump current output
into a file so it needs to be sync-ed with the corresponding function
hist_browser__show_hierarchy_entry().  So use hists->nr_hpp_node to
indent width and use first fmt_node to print overhead columns instead of
checking whether it's a sort entry (or dynamic entry).

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10 16:46:04 -03:00
Namhyung Kim 58ecd33be9 perf report: Use hierarchy hpp list on gtk
Now hpp formats are linked using perf_hpp_list_node when hierarchy is
enabled.  Like in stdio, use this info to print entries with multiple
sort keys in a single hierarchy properly.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-8-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-08 10:11:21 +01:00
Namhyung Kim a61a22f684 perf hists browser: Use hierarchy hpp list
Now hpp formats are linked using perf_hpp_list_node when hierarchy is
enabled.  Like in stdio, use this info to print entries with multiple
sort keys in a single hierarchy properly.

Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-7-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-08 10:11:21 +01:00
Namhyung Kim f58c95e344 perf report: Use hierarchy hpp list on stdio
Now hpp formats are linked using perf_hpp_list_node when hierarchy is
enabled.  Use this info to print entries with multiple sort keys in a
single hierarchy properly.

For example, the below example shows using 4 sort keys with 2 levels.

  $ perf report --hierarchy -s '{prev_pid,prev_comm},{next_pid,next_comm}' \
   --percent-limit 1 -i perf.data.sched
  ...
  #    Overhead  prev_pid+prev_comm / next_pid+next_comm
  # ...........  .......................................
  #
      22.36%     0  swapper/0
          9.48%     17773  transmission-gt
          5.25%     109  kworker/0:1H
          1.53%     6524  Xephyr
      21.39%     17773  transmission-gt
          9.52%     0  swapper/0
          9.04%     0  swapper/2
          1.78%     0  swapper/3

Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-6-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-08 10:11:20 +01:00
Namhyung Kim 2dbbe9f26c perf hists: Fix indent for multiple hierarchy sort key
When multiple sort keys are used in a single hierarchy, it should indent
using number of hierarchy levels instead of number of sort keys.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-5-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-08 10:11:20 +01:00
Namhyung Kim 1b2dbbf41a perf hists: Use own hpp_list for hierarchy mode
Now each hists has its own hpp lists in hierarchy.  So instead of having
a pointer to a single perf_hpp_fmt in a hist entry, make it point the
hpp_list for its level.  This will be used to support multiple sort keys
in a single hierarchy level.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-3-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-08 10:11:19 +01:00
Namhyung Kim c3bc0c4368 perf hists: Introduce perf_hpp__setup_hists_formats()
The perf_hpp__setup_hists_formats() is to build hists-specific output
formats (and sort keys).  Currently it's only used in order to build the
output format in a hierarchy with same sort keys, but it could be used
with different sort keys in non-hierarchy mode later.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-2-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-08 10:11:19 +01:00
Namhyung Kim cb1fab9172 perf report: Left align dynamic entries in hierarchy
The dynamic entries are right-aligned unlike other entries since it
usually has numeric value.  But for the hierarchy mode, left alignment
is more appropriate IMHO.  Also trim spaces on the left so that we can
easily identify the hierarchy.

Before:

  $ perf report --hierarchy -i perf.data.kmem -s gfp_flags,ptr,bytes_req --stdio -g none
  ...
  #
  #       Overhead                                        gfp_flags /                ptr /          bytes_req
  # ..............  .................................................................................................
  #
      91.67%                   GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
         37.50%        0xffff8803f7669400
            37.50%                       448
          8.33%        0xffff8803f766be00
             8.33%                        96
          4.17%        0xffff8800d156dc00
             4.17%                       704

After:

  #       Overhead  gfp_flags / ptr / bytes_req
  # ..............  ....................................
  #
      91.67%        GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
         37.50%        0xffff8803f7669400
            37.50%        448
          8.33%        0xffff8803f766be00
             8.33%        96
          4.17%        0xffff8800d156dc00
             4.17%        704

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456512767-1164-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-26 18:37:06 -03:00
Namhyung Kim d3a72fd818 perf report: Fix indentation of dynamic entries in hierarchy
When dynamic entries are used in the hierarchy mode with multiple
events, the output might not be aligned properly.  In the hierarchy
mode, the each sort column is indented using total number of sort keys.
So it keeps track of number of sort keys when adding them.  However
a dynamic sort key can be added more than once when multiple events have
same field names.  This results in unnecessarily long indentation in the
output.

For example perf kmem records following events:

  $ perf evlist --trace-fields -i perf.data.kmem
  kmem:kmalloc: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags
  kmem:kmalloc_node: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags,node
  kmem:kfree: trace_fields: call_site,ptr
  kmem:kmem_cache_alloc: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags
  kmem:kmem_cache_alloc_node: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags,node
  kmem:kmem_cache_free: trace_fields: call_site,ptr
  kmem:mm_page_alloc: trace_fields: page,order,gfp_flags,migratetype
  kmem:mm_page_free: trace_fields: page,order

As you can see, many field names shared between kmem events.  So adding
'ptr' dynamic sort key alone will set nr_sort_keys to 6.  And this adds
many unnecessary spaces between columns.

Before:

  $ perf report -i perf.data.kmem --hierarchy -s ptr -g none --stdio
  ...
  #                Overhead                 ptr
  # .......................  ...................................
  #
      99.89%                 0xffff8803ffb79720
       0.06%                 0xffff8803d228a000
       0.03%                 0xffff8803f7678f00
       0.00%                 0xffff880401dc5280
       0.00%                 0xffff880406172380
       0.00%                 0xffff8803ffac3a00
       0.00%                 0xffff8803ffac1600

After:

  # Overhead                 ptr
  # ........  ....................
  #
      99.89%  0xffff8803ffb79720
       0.06%  0xffff8803d228a000
       0.03%  0xffff8803f7678f00
       0.00%  0xffff880401dc5280
       0.00%  0xffff880406172380
       0.00%  0xffff8803ffac3a00
       0.00%  0xffff8803ffac1600

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456512767-1164-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-26 18:36:11 -03:00
Namhyung Kim 2ddda79237 perf report: Show message for percent limit on gtk
Like the stdio, it should show messages about omitted hierarchy
entries.  Please refer the previous commit for more details.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-26 11:20:36 -03:00
Namhyung Kim 79dded8776 perf hists browser: Show message for percent limit
Like the stdio, it should show messages about omitted hierarchy entries.
Please refer the previous commit for more details.

As it needs to check an entry is omitted or not multiple times, add the
has_no_entry field in the hist entry.

Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-26 11:20:36 -03:00
Namhyung Kim 201fde73b1 perf hists browser: Cleanup hist_browser__update_percent_limit()
The previous patch introduced __rb_hierarchy_next() function with
various move direction like HMD_FORCE_CHILD but missed to change using
it some place.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-26 11:20:36 -03:00
Namhyung Kim bd4abd39db perf report: Show message for percent limit on stdio
When the hierarchy mode is used, some entries might be omiited due to a
percent limit or filter.  In this case the output hierarchy is different
than other entries.  Add an informative message to users about this.

For example, when 4% of percent limit is applied:

Before:
  #       Overhead  Command / Shared Object / Symbol
  # ..............  ..........................................
  #
      49.09%        swapper
         48.67%        [kernel.vmlinux]
            34.42%        [k] intel_idle
      11.51%        firefox
          8.87%        libpthread-2.22.so
             6.60%        [.] __GI___libc_recvmsg
      10.49%        gnome-shell
          4.74%        libc-2.22.so
      10.08%        Xorg
          6.11%        libc-2.22.so
             5.27%        [.] __memcpy_sse2_unaligned
       6.15%        perf

Note that, gnome-shell/libc has no symbols and perf has no dso/symbols.
With that patch the output will look like below:

After:

  #       Overhead  Command / Shared Object / Symbol
  # ..............  ..........................................
  #
      49.09%        swapper
         48.67%        [kernel.vmlinux]
            34.42%        [k] intel_idle
      11.51%        firefox
          8.87%        libpthread-2.22.so
             6.60%        [.] __GI___libc_recvmsg
      10.49%        gnome-shell
          4.74%        libc-2.22.so
                          no entry >= 4.00%
      10.08%        Xorg
          6.11%        libc-2.22.so
             5.27%        [.] __memcpy_sse2_unaligned
       6.15%        perf
                       no entry >= 4.00%

Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-26 11:20:36 -03:00
Namhyung Kim a7b5895b91 perf hists: Add more helper functions for the hierarchy mode
The hists__overhead_width() is to calculate width occupied by the
overhead (and others) columns before the sort columns.

The hist_entry__has_hiearchy_children() is to check whether an entry has
lower entries (children) in the hierarchy to be shown in the output.
This means the children should not be filtered out and above the percent
limit.

These two functions will be used to show information when all children
of an entry is omitted by the percent limit (or filter).

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-26 11:20:35 -03:00
Namhyung Kim e311ec1e5d perf ui/gtk: Implement hierarchy output mode
The hierarchy output mode is to group entries for each level so that
user can see higher level picture more easily.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-16-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 20:21:14 -03:00
Namhyung Kim d8b92400d3 perf hists browser: Align column header in hierarchy mode
Like in stdio, fit column header to hierarchy output.  Merge column
headers with "/" as a separator.

   Overhead        Command / Shared Object / Symbol
  ...
  +   0.09%        dwm
  +   0.06%        emacs
  -   0.05%        perf
     -   0.05%        [kernel.vmlinux]
        +   0.03%        [k] memcpy_orig
        +   0.01%        [k] unmap_single_vma
        +   0.01%        [k] smp_call_function_single
        +   0.00%        [k] native_irq_return_iret
        +   0.00%        [k] arch_trigger_all_cpu_backtrace_handler
        +   0.00%        [k] native_write_msr_safe

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-15-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 20:21:14 -03:00
Namhyung Kim d0506edbec perf hists browser: Implement hierarchy output
Implement hierarchy mode in TUI.  The output is look like stdio but it
also supports to fold/unfold children dynamically.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-14-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 20:21:13 -03:00
Namhyung Kim 492b101060 perf hists browser: Support collapsing/expanding whole entries in hierarchy
The 'C' and 'E' keys are to collapse/expand all hist entries.  Update
nr_hierarchy_entries properly in this case.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-13-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 20:21:13 -03:00
Namhyung Kim f5b763feeb perf hists browser: Count number of hierarchy entries
Add nr_hierarchy_entries field to keep current number of (unfolded) hist
entries.  And the hist_entry->nr_rows carries number of direct children.
But in the hierarchy mode, entry can have grand children and callchains.
So update the number properly using hierarchy_count_rows() when toggling
the folded state (by pressing ENTER key).

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-12-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 20:21:12 -03:00
Namhyung Kim 8e2fc44f46 perf ui/stdio: Align column header for hierarchy output
The hierarchy output mode is to group entries so the existing columns
won't fit to the new output.  Treat all sort keys as a single column and
separate headers by "/".

  #    Overhead  Command / Shared Object
  # ...........  ................................
  #
      15.11%     swapper
         14.97%     [kernel.vmlinux]
          0.09%     [libahci]
          0.05%     [iwlwifi]
  ...

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 20:21:12 -03:00
Namhyung Kim ef86d68a08 perf ui/stdio: Implement hierarchy output mode
The hierarchy output mode is to group entries for each level so that
user can see higher level picture more easily.  It also helps to find
out which component is most costly.  The output will look like below:

      15.11%     swapper
         14.97%     [kernel.vmlinux]
          0.09%     [libahci]
          0.05%     [iwlwifi]
      10.29%     irq/33-iwlwifi
          6.45%     [kernel.vmlinux]
          1.41%     [mac80211]
          1.15%     [iwldvm]
          1.14%     [iwlwifi]
          0.14%     [cfg80211]
       4.81%     firefox
          3.92%     libxul.so
          0.34%     [kernel.vmlinux]

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 20:21:12 -03:00
Namhyung Kim 1f2d72cf32 perf hists: Count number of sort keys
It'll be used for hierarchy output mode to indent entries properly.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 20:21:11 -03:00
Namhyung Kim dd42baf1f6 perf tools: Fix assertion failure on dynamic entry
The dynamic entry is created for each field in a tracepoint event.
Since they have no fixed hpp format index, it should skip when
perf_hpp__reset_width() is called.

This caused following assertion failure..

  $ perf record -e sched:sched_switch -a sleep 1

  $ perf report -s comm,next_pid --stdio
  perf: ui/hist.c:651: perf_hpp__reset_width:
    Assertion `!(fmt->idx >= PERF_HPP__MAX_INDEX)' failed.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:07:14 -03:00
Arnaldo Carvalho de Melo 89fee70943 perf hists: Do column alignment on the format iterator
We were doing column alignment in the format function for each cell,
returning a string padded with spaces so that when the next column is
printed the cursor is at its column alignment.

This ends up needlessly printing trailing spaces, do it at the format
iterator, that is where we know if it is needed, i.e. if there is more
columns to be printed.

This eliminates the need for triming lines when doing a dump using 'P'
in the TUI browser and also produces far saner results with things like
piping 'perf report' to 'less'.

Right now only the formatters for sym->name and the 'locked' column
(perf mem report), that are the ones that end up at the end of lines
in the default 'perf report', 'perf top' and 'perf mem report' tools,
the others will be done in a subsequent patch.

In the end the 'width' parameter for the formatters now mean, in
'printf' terms, the 'precision', where before it was the field 'width'.

Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-s7iwl2gj23w92l6tibnrcqzr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-12 12:52:25 -03:00
Namhyung Kim b62e8dfcda perf hists browser: Add 'L' hotkey to change percent limit
Add 'L' key action to change the percent limit applied to both of hist
entries and callchains.

Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1454508683-5735-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:22 -03:00
Jiri Olsa f0786af536 perf hists: Introduce hists__for_each_format macro
With the hist object having the perf_hpp_list we can now iterate output
format entries based in the hists object. Adding hists__for_each_format
macro to do that.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-26-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:19 -03:00
Jiri Olsa 43e0a68f13 perf hists: Add struct perf_hpp_list argument to helper functions
Adding struct perf_hpp_list argument to following helper functions:

  void perf_hpp__setup_output_field(struct perf_hpp_list *list);
  void perf_hpp__reset_output_field(struct perf_hpp_list *list);
  void perf_hpp__append_sort_keys(struct perf_hpp_list *list);

so they could be used on hists's hpp_list.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-24-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:17 -03:00
Jiri Olsa 1a8ebd243a perf hists: Introduce perf_hpp_list__for_each_sort_list_safe macro
Introducing perf_hpp_list__for_each_sort_list_safe macro
to iterate perf_hpp_list object's sort entries safely.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-23-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:16 -03:00
Jiri Olsa d29a497090 perf hists: Introduce perf_hpp_list__for_each_sort_list macro
Introducing perf_hpp_list__for_each_sort_list macro to iterate
perf_hpp_list object's sort entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-22-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:15 -03:00
Jiri Olsa 7a1799e0a2 perf hists: Introduce perf_hpp_list__for_each_format_safe macro
Introducing perf_hpp_list__for_each_format_safe macro to iterate
perf_hpp_list object's output entries safely.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-21-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:14 -03:00
Jiri Olsa cf094045d7 perf hists: Introduce perf_hpp_list__for_each_format macro
Introducing perf_hpp_list__for_each_format macro to iterate
perf_hpp_list object's output entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-20-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:14 -03:00
Jiri Olsa ebdd98e030 perf hists: Add perf_hpp_list register helpers
Adding 2 perf_hpp_list register helpers:

  perf_hpp_list__column_register()
  perf_hpp_list__register_sort_field()

to be called within existing helpers:

  perf_hpp__column_register()
  perf_hpp__register_sort_field()

to register format entries within global perf_hpp_list object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-17-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:12 -03:00
Jiri Olsa 7c31e10266 perf hists: Introduce struct perf_hpp_list
Gather output and sort lists under struct perf_hpp_list, so we could
have multiple instancies of sort/output format entries.

Replacing current perf_hpp__list and perf_hpp__sort_list lists with
single perf_hpp_list instance.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-15-git-send-email-jolsa@kernel.org
[ Renamed fields to .{fields,sorts} as suggested by Namhyung and acked by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:10 -03:00
Jiri Olsa 564132f311 perf hists: Properly release format fields
With multiple list holding format entries, we need the support properly
releasing format output/sort fields.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:08 -03:00
Jiri Olsa 12cb4397fb perf hists: Remove perf_hpp__column_(disable|enable)
Those functions are no longer needed. They operate over perf_hpp__format
array which is now used only as template for dynamic entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:08 -03:00
Jiri Olsa 1945c3e734 perf hists: Allocate output sort field
Currently we use static output fields, because we have single global
list of all sort/output fields.

We will add hists specific sort and output lists in following patches,
so we need all format entries to be dynamically allocated. Adding
support to allocate output sort field.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:07 -03:00
Jiri Olsa 3f931f2c42 perf hists: Make hpp setup function generic
Now that we have the 'equal' method implemented for hpp format entries
we can ease up the logic in the following functions and make them
generic wrt comparing format entries:

  perf_hpp__setup_output_field
  perf_hpp__append_sort_keys

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:02 -03:00
Jiri Olsa c0020efa07 perf hists: Add 'hpp__equal' callback function
Adding 'hpp__equal' callback function to compare hpp output format
entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:01 -03:00
Jiri Olsa 97358084b9 perf hists: Add 'equal' method to perf_hpp_fmt struct
To easily compare format entries and make it available for all kinds of
format entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 11:13:12 -03:00
Jiri Olsa 2e8b79e706 perf hists: Use struct perf_hpp_fmt::idx in perf_hpp__reset_width
We are going to add dynamic hpp format fields, so we need to make the
'len' change for the format itself, not in the perf_hpp__format
template.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 11:13:12 -03:00
Jiri Olsa b21a763edd perf hists: Add _idx fields into struct perf_hpp_fmt
Currently there's no way of comparing hpp format entries, which is
needed in following patches.

Adding _idx fields into struct perf_hpp_fmt to recognize and be able to
compare hpp format entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 11:13:11 -03:00
Namhyung Kim 3848c23b19 perf report: Don't show blank lines if entry has no callchain
When all callchains of a hist entry is percent-limited, do not add a
blank line at the end.  It makes the entry look like it doesn't have
callchains.

Reported-and-Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160128122454.GA27446@danjae.kornet
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:51:09 -03:00
Namhyung Kim 59c624e239 perf hists browser: Fix percent display in callchains
When there's only a single callchain, perf doesn't print its percentage
in front of the symbols.  This is because it assumes that the percentage
is same as parents.  But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown.  In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.

For example, let's see the following callchain.

  $ perf report --no-children --percent-limit 0.01 --tui
  ...
  -    0.06%  sleep    [kernel.vmlinux]    [k] kmem_cache_alloc_trace
       kmem_cache_alloc_trace
     - perf_event_mmap
        - 0.04% mmap_region
             do_mmap_pgoff
           - vm_mmap_pgoff
              + 0.02% sys_mmap_pgoff
              + 0.02% vm_mmap
           + 0.02% mprotect_fixup

Current code omits the percent if 'mmap_region' becomes the only node
when percent limit is set to 0.03%, its percent is not 0.06% but users
will assume it incorrectly.

Before:

  $ perf report --no-children --percent-limit 0.03 --tui
  ...
     0.06%  sleep    [kernel.vmlinux]    [k] kmem_cache_alloc_trace
       kmem_cache_alloc_trace
     - perf_event_mmap
        - mmap_region
          do_mmap_pgoff
          vm_mmap_pgoff

After:

  $ perf report --no-children --percent-limit 0.03 --tui
  ...
     0.06%  sleep    [kernel.vmlinux]    [k] kmem_cache_alloc_trace
       kmem_cache_alloc_trace
     - perf_event_mmap
        - 0.04% mmap_region
             do_mmap_pgoff
             vm_mmap_pgoff

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:46:27 -03:00
Namhyung Kim 5eca104eee perf hists browser: Pass parent_total to callchain print functions
Pass parent node's total period to callchain print functions.  This info
is needed by later patch to determine whether it can omit percent or not
correctly.

No functional change intended.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:45:42 -03:00
Namhyung Kim 0c841c6c16 perf hists browser: Fix dump to show correct callchain style
The commit 8c430a3486 ("perf hists browser: Support folded
callchains") missed to update hist_browser__dump() so it always shows
graph-style callchains regardless of current setting.

To fix that, factor out callchain printing code and rename the existing
function which prints graph-style callchain.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8c430a3486 ("perf hists browser: Support folded callchains")
Link: http://lkml.kernel.org/r/1453909257-26015-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:44:30 -03:00
Namhyung Kim 7ed5d6e28a perf report: Fix percent display in callchains on --stdio
When there's only a single callchain, perf doesn't print its percentage
in front of the symbols.  This is because it assumes that the percentage
is same as parents.  But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown.  In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.

For example, let's see the following callchain.

  $ perf report -s comm --percent-limit 0.01 --stdio
  ...
     9.95%  swapper
            |
            |--7.57%--intel_idle
            |          cpuidle_enter_state
            |          cpuidle_enter
            |          call_cpuidle
            |          cpu_startup_entry
            |          |
            |          |--4.89%--start_secondary
            |          |
            |           --2.68%--rest_init
            |                     start_kernel
            |                     x86_64_start_reservations
            |                     x86_64_start_kernel
	    |
	    |--0.15%--__schedule
	    |          |
	    |          |--0.13%--schedule
	    |          |          schedule_preempt_disable
	    |          |          cpu_startup_entry
            |          |          |
            |          |          |--0.09%--start_secondary
            |          |          |
            |          |           --0.04%--rest_init
            |          |                     start_kernel
            |          |                     x86_64_start_reservations
            |          |                     x86_64_start_kernel
            |          |
            |           --0.01%--schedule_preempt_disabled
            |                     cpu_startup_entry
  ...

Current code omits the percent if 'intel_idle' becomes the only node
when percent limit is set to 0.5%, its percent is not 9.95% but users
will assume it incorrectly.

Before:

  $ perf report --percent-limit 0.5 --stdio
  ...
     9.95%  swapper
            |
            ---intel_idle
               cpuidle_enter_state
               cpuidle_enter
               call_cpuidle
               cpu_startup_entry
               |
               |--4.89%--start_secondary
               |
                --2.68%--rest_init
                          start_kernel
                          x86_64_start_reservations
                          x86_64_start_kernel

After:

  $ perf report --percent-limit 0.5 --stdio
  ...
     9.95%  swapper
            |
             --7.57%--intel_idle
                       cpuidle_enter_state
                       cpuidle_enter
                       call_cpuidle
                       cpu_startup_entry
                       |
                       |--4.89%--start_secondary
                       |
                        --2.68%--rest_init
                                  start_kernel
                                  x86_64_start_reservations
                                  x86_64_start_kernel

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:41:32 -03:00
Namhyung Kim 54d27b3119 perf callchain: Pass parent_samples to __callchain__fprintf_graph()
Pass hist entry's period to graph callchain print function.  This info
is needed by later patch to determine whether it can omit percentage of
top-level node or not.

No functional change intended.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:39:52 -03:00
Namhyung Kim 7e597d327e perf report: Get rid of hist_entry__callchain_fprintf()
It's just a wrapper function to align the start position ofcallchains to
'comm' of each thread if it's a first sort key.  But it doesn't not work
with tracepoint events and also with upcoming hierarchy view.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-01 17:20:31 -03:00
Namhyung Kim b1baae8919 perf hists browser: Skip scripting when perf.data file not available
The script and data-switch context menu are only meaningful when it
deals with a data file.  So add a check so that it cannot be shown when
perf-top is run.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453555902-18401-4-git-send-email-namhyung@kernel.org
[ Use goto skip_scripting instead of two is_report_browser() tests ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 16:08:12 -03:00
Namhyung Kim 4056132e10 perf hists browser: Offer non-symbol specific menu options for --sort without 'sym'
Now that we check more strictly what each of the menu entries need, we
can stop bailing out when 'sym' is not in the --sort order, instead we
let each option be added if what it needs is present.

This way, for instance, we can run scripts on all samples, see DSO map
details when 'dso' is in the --sort provided, etc.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a  larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:51 -03:00
Namhyung Kim d9695d9f93 perf hists browser: Be a bit more strict about presenting CPU socket zoom
For consistency with the other sort order checks.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a  larger patch, moved check to add_socket_opt() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:50 -03:00
Namhyung Kim b1447a54f5 perf hists browser: Offer 'Zoom into DSO'/'Map details' only when sort order has 'dso'
We can't offer a zoom into DSO when a bucket (struct hist_entry) may
have samples for more than one DSO, i.e. when 'dso' is not part of
the sort order, ditto for 'Map details', fix it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a  larger patch, moved check to add_{dso,map}_opt() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:50 -03:00
Namhyung Kim c221acb0f9 perf hists browser: Only offer symbol scripting when a symbol is under the cursor
When this feature was introduced a check was made if there was a
resolved symbol under the cursor, it got lost in commit ea7cd59233
("perf hists browser: Split popup menu actions - part 2"), reinstate it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: ea7cd59233 ("perf hists browser: Split popup menu actions - part 2")
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a  larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:49 -03:00
Namhyung Kim 2eafd410e6 perf hists browser: Only 'Zoom into thread' only when sort order has 'pid'
We can't offer a zoom into thread when a bucket (struct hist_entry) may
have samples for more than one thread, i.e. when 'pid' is not part of
the sort order, fix it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a  larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:49 -03:00
Taeung Song 78ce08dfbd perf annotate: Rename 'colors.code' to 'colors.jump_arrows'
USe 'jump_arrows' config name instead of 'code' on 'colors' section.
'colors.code' config is only for jump arrows on assembly code listings
i.e.

    │     ┌──jmp    1333
    │     │  xchg   %ax,%ax
    │     │  mov    %r15,%r10
    │     └─→cmp    %r15,%r14

But this config name seems unfit.

 'jump_arrows' is more descriptive than 'code'.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452240971-25418-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:52:46 -03:00
Markus Trippelsdorf d4913cbd05 perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
The issue was pointed out by gcc-6's -Wmisleading-indentation.

Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: c97cf42219 ("perf top: Live TUI Annotation")
Link: http://lkml.kernel.org/r/20151214154403.GB1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 11:14:25 -03:00
Namhyung Kim 090cff3eae perf ui/tui: Print helpline message as is
When a tip message contains a percent sign, it was treated printf format
specifier so broken string was printed like below.

  Tip: Limit to show entries above 577nly: perf report --percent-limit 5
                                   ^^^

As ui_browser__show receives format string, pass additional "%s" so that
the help (tip) message can be printed as is.

  Tip: Limit to show entries above 5% only: perf report --percent-limit 5

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452509594-13616-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-12 12:42:08 -03:00
Jiri Olsa b97511c5bc perf tools: Add overhead/overhead_children keys defaults via string
We currently set 'overhead' and 'overhead_children' as default sort keys
within perf_hpp__init function by directly adding into the sort list.

This patch adds 'overhead' and 'overhead_children' in text form into
sort_keys and let them be added by standard sort dimension interface.

We need to eliminate dirrect sort_list additions to be able to add
support for hists specific sort keys.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08 12:58:58 -03:00
Namhyung Kim 361459f163 perf tools: Skip dynamic fields not defined for current event
When there are multiple events, each dynamic sort key is defined just
for one event.  In this case other events will always show "N/A" for
those fields.  But they are meaningless and consume precious screen
width.

Let's skip those undefined dynamic fields.

  $ perf record -e kmem:kmalloc,kmem:kfree -a sleep 1

  $ perf report -s 'comm,kmalloc.*' --stdio
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 20K of event 'kmem:kmalloc'
  # Event count (approx.): 20533
  #
  # Overhead  Command           call_site                 ptr  bytes_req  bytes_alloc            gfp_flags
  # ........  .......  ..................  ..................  .........  ...........  ...................
  #
      99.89%  perf       ffffffffa01d4396  0xffff8803ffb79720         96           96    GFP_NOFS|GFP_ZERO
       0.06%  sleep      ffffffff8114e1cd  0xffff8803d228a000       4096         4096           GFP_KERNEL
       0.03%  perf       ffffffff811d6ae6  0xffff8803f7678f00        240          256  GFP_KERNEL|GFP_ZERO
       0.00%  perf       ffffffff812263c1  0xffff880406172380        128          128           GFP_KERNEL
       0.00%  perf       ffffffff812264b9  0xffff8803ffac1600        504          512           GFP_KERNEL
       0.00%  perf       ffffffff81226634  0xffff880401dc5280         28           32           GFP_KERNEL
       0.00%  sleep      ffffffff81226da9  0xffff8803ffac3a00        392          512           GFP_KERNEL

  # Samples: 20K of event 'kmem:kfree'
  # Event count (approx.): 20597
  #
  # Overhead  Command
  # ........  ..............
  #
      99.63%  perf
       0.14%  sleep
       0.11%  irq/36-iwlwifi
       0.11%  kworker/u16:0
       0.01%  Xorg
       0.00%  firefox

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-12-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-06 20:11:12 -03:00
Ingo Molnar 8d7d377c2b perf tui: Change default selection background color to yellow
Boris reported that 'perf top' is unusable on his default 'black on
white' terminal, which uses (eye friendly) light-grey as a background
color.

The reason is that the TUI cursor for the current selection line uses
HE_COLORSET_SELECTED, and that has a default background color of
'lightgrey' - which is a common terminal background choice and thus
the colors conflict.

Use yellow as the background color instead: that should be an uncommon
terminal background, yet it's still ergonomic on both black and
white/grey terminals.

[ It would be a better solution to straight out detect color
  collisions and resolve them reasonably by converting them to RGB and
  calculating color space distances, but I was unable to find
  proper documentation for SLtt_get_color_object() to recover the
  current color scheme so I gave up ... Yellow works well enough. ]

Reported-and-Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150305103213.GA23046@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09 13:41:55 -03:00
Ingo Molnar a30c99a0be Merge branch 'perf/urgent' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-08 06:06:20 +01:00
Wang Nan 4938cf0c7a perf hists browser: Fix segfault if use symbol filter in cmdline
If feed perf a symbol filter in cmdline and the result is empty,
pressing 'Enter' in the hist browser causes crash:

 # ./perf report perf.data   <-- Common mistake for beginners

Then press 'Enter':

 perf: Segmentation fault
 -------- backtrace --------
 /home/wangnan/perf[0x53e578]
 /lib64/libc.so.6(+0x3545f)[0x7f76bafe045f]
 /home/wangnan/perf[0x539dd4]
 /home/wangnan/perf(perf_evlist__tui_browse_hists+0x96)[0x53d216]
 /home/wangnan/perf(cmd_report+0x1b9f)[0x442c7f]
 /home/wangnan/perf[0x47efa2]
 /home/wangnan/perf(main+0x5f5)[0x432fa5]
 /lib64/libc.so.6(__libc_start_main+0xf4)[0x7f76bafccbd4]
 /home/wangnan/perf[0x4330d4]

This is because 'perf.data' is interpreted as a symbol filter, and the
result is empty, so selection is empty. However,
hist_browser__toggle_fold() forgets to check it.

This patch simply return false when selection is NULL.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449455746-41952-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-07 12:02:35 -03:00
Wang Nan 979d2cac11 perf hists browser: Reset selection when refresh
With the following steps:

 Step 1: perf report

 Step 2: Use UP/DOWN to select an entry, don't press 'ENTER'

 Step 3: Use '/' to filter symbols, use a filter which returns
         empty result

 Step 4: Press 'ENTER'

We see that, even if we have filtered all the symbols (and the main
interface is empty), pressing 'ENTER' still selects one symbol. This
behavior surprises the user.

This patch resets browser->{he_,}selection in hist_browser__refresh()
and lets it choose default selection. In this case
browser->{he_,}selection keeps NULL so user won't see annotation item in
menu.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449455746-41952-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-07 12:02:12 -03:00
Wang Nan 837eeb7569 perf hists browser: Add NULL pointer check to prevent crash
Before this patch we can trigger a segfault by following steps:

 Step 0: Use 'perf record' to generate a perf.data without callchain

 Step 1: perf report

 Step 2: Use UP/DOWN to select an entry, don't press 'ENTER'

 Step 3: Use '/' to filter symbols, use a filter which returns
         empty result

 Step 4: Press 'ENTER' (notice here that the old selection is still
		        there. This is another problem)

 Step 5: Press 'ENTER' to annotate that symbol

 Step 6: Press 'LEFT' to go out.

 Result: segfault:

 perf: Segmentation fault
 -------- backtrace --------
 /home/wangnan/perf[0x53e568]
 /lib64/libc.so.6(+0x3545f)[0x7fba75d3245f]
 /home/wangnan/perf[0x537516]
 /home/wangnan/perf[0x533fef]
 /home/wangnan/perf[0x53b347]
 /home/wangnan/perf(perf_evlist__tui_browse_hists+0x96)[0x53d206]
 /home/wangnan/perf(cmd_report+0x1b9f)[0x442c7f]
 /home/wangnan/perf[0x47efa2]
 /home/wangnan/perf(main+0x5f5)[0x432fa5]
 /lib64/libc.so.6(__libc_start_main+0xf4)[0x7fba75d1ebd4]
 /home/wangnan/perf[0x4330d4]

This is because in this case 'nd' could be NULL in
ui_browser__hists_seek(), but that function never checks it.

This patch adds checker for potential NULL pointer in that function.
After this patch the above steps won't segfault.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449455746-41952-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-07 12:02:11 -03:00
Namhyung Kim 0390504825 perf hists browser: Update nr entries regardless of min percent
When perf report on TUI was called with -S symbol filter, it should
update nr entries even if min_pcnt is 0.  IIRC the reason was to update
nr entries after applying minimum percent threshold.  But if symbol
filter was given on command line (with -S option), it should use
hists->nr_non_filtered_entries instead of hists->nr_entries.

So this patch fixes a bug of navigating hists browser that the cursor
goes beyond the number of entries when -S (or similar) option is used.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1448645559-31167-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-27 21:53:33 -03:00
Namhyung Kim 2c6caff2b2 perf ui/gtk: Support folded callchains
The folded callchain mode is to print all chains in a single line.
Currently perf report --gtk doesn't support folded callchains.  Like
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19 13:19:26 -03:00
Namhyung Kim 3cd99dfd1c perf ui/gtk: Support flat callchains
The flat callchain mode is to print all chains in a simple flat
hierarchy so make it easy to see.

Currently perf report --gtk doesn't show flat callchains properly.  With
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes.  To do that, add parent_val list to
struct callchain_node and show them along with the (normal) val list.

See the previous commit on TUI support for more information.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19 13:19:25 -03:00
Namhyung Kim 8c430a3486 perf hists browser: Support folded callchains
The folded callchain mode prints all chains in a single line.

Currently perf report --tui doesn't support folded callchains.  Like
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes.  To do that, add flat_val list to
struct callchain_node and show them along with the (normal) val list.

For example, folded callchain looks like below:

  $ perf report -g folded --tui
  Samples: 234  of event 'cycles:pp', Event count (approx.): 32605268
    Overhead  Command  Shared Object     Symbol
  -   39.93%  swapper  [kernel.vmlinux]  [k] intel_idle
     + 28.63% intel_idle; cpuidle_enter_state; cpuidle_enter; ...
     + 11.30% intel_idle; cpuidle_enter_state; cpuidle_enter; ...

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19 13:19:25 -03:00
Namhyung Kim 4b3a321223 perf hists browser: Support flat callchains
The flat callchain mode is to print all chains in a single, simple
hierarchy so make it easy to see.

Currently perf report --tui doesn't show flat callchains properly.  With
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes.  To do that, add parent_val list to
struct callchain_node and show them along with the (normal) val list.

For example, consider following callchains with '-g graph'.

  $ perf report -g graph
  - 39.93%  swapper  [kernel.vmlinux]  [k] intel_idle
       intel_idle
       cpuidle_enter_state
       cpuidle_enter
       call_cpuidle
     - cpu_startup_entry
          28.63% start_secondary
        - 11.30% rest_init
             start_kernel
             x86_64_start_reservations
             x86_64_start_kernel

Before:
  $ perf report -g flat
  - 39.93%  swapper  [kernel.vmlinux]  [k] intel_idle
       28.63% start_secondary
     - 11.30% rest_init
          start_kernel
          x86_64_start_reservations
          x86_64_start_kernel

After:
  $ perf report -g flat
  - 39.93%  swapper  [kernel.vmlinux]  [k] intel_idle
     - 28.63% intel_idle
          cpuidle_enter_state
          cpuidle_enter
          call_cpuidle
          cpu_startup_entry
          start_secondary
     - 11.30% intel_idle
          cpuidle_enter_state
          cpuidle_enter
          call_cpuidle
          cpu_startup_entry
          start_kernel
          x86_64_start_reservations
          x86_64_start_kernel

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19 13:19:24 -03:00
Namhyung Kim 18bb838129 perf hists browser: Factor out hist_browser__show_callchain_list()
This function is to print a single callchain list entry.  As this
function will be used by other function, factor out to a separate
function.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19 13:19:24 -03:00
Namhyung Kim f2af008695 perf report: Add callchain value option
Now -g/--call-graph option supports how to display callchain values.
Possible values are 'percent', 'period' and 'count'.  The percent is
same as before and it's the default behavior.  The period displays the
raw period value rather than the percentage.  The count displays the
number of occurrences.

  $ perf report --no-children --stdio -g percent
  ...
    39.93%  swapper  [kernel.vmlinux]  [k] intel_idel
            |
            ---intel_idle
               cpuidle_enter_state
               cpuidle_enter
               call_cpuidle
               cpu_startup_entry
               |
               |--28.63%-- start_secondary
               |
                --11.30%-- rest_init

  $ perf report --no-children --show-total-period --stdio -g period
  ...
    39.93%   13018705  swapper  [kernel.vmlinux]  [k] intel_idel
            |
            ---intel_idle
               cpuidle_enter_state
               cpuidle_enter
               call_cpuidle
               cpu_startup_entry
               |
               |--9334403-- start_secondary
               |
                --3684302-- rest_init

  $ perf report --no-children --show-nr-samples --stdio -g count
  ...
    39.93%     80  swapper  [kernel.vmlinux]  [k] intel_idel
            |
            ---intel_idle
               cpuidle_enter_state
               cpuidle_enter
               call_cpuidle
               cpu_startup_entry
               |
               |--57-- start_secondary
               |
                --23-- rest_init

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19 13:19:23 -03:00
Namhyung Kim 5ab250cafc perf callchain: Abstract callchain print function
This is a preparation to support for printing other type of callchain
value like count or period.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-4-git-send-email-namhyung@kernel.org
[ renamed new _sprintf_ operation to _scnprintf_ ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19 13:19:22 -03:00
Namhyung Kim 26e779245d perf report: Support folded callchain mode on --stdio
Add new call chain option (-g) 'folded' to print callchains in a line.
The callchains are separated by semicolons, and preceded by (absolute)
percent values and a space.

For example, the following 20 lines can be printed in 3 lines with the
folded output mode:

  $ perf report -g flat --no-children | grep -v ^# | head -20
      60.48%  swapper  [kernel.vmlinux]  [k] intel_idle
              54.60%
                 intel_idle
                 cpuidle_enter_state
                 cpuidle_enter
                 call_cpuidle
                 cpu_startup_entry
                 start_secondary

              5.88%
                 intel_idle
                 cpuidle_enter_state
                 cpuidle_enter
                 call_cpuidle
                 cpu_startup_entry
                 rest_init
                 start_kernel
                 x86_64_start_reservations
                 x86_64_start_kernel

  $ perf report -g folded --no-children | grep -v ^# | head -3
      60.48%  swapper  [kernel.vmlinux]  [k] intel_idle
  54.60% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
  5.88% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel

This mode is supported only for --stdio now and intended to be used by
some scripts like in FlameGraphs[1].  Support for other UI might be
added later.

[1] http://www.brendangregg.com/FlameGraphs/cpuflamegraphs.html

Requested-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19 13:19:22 -03:00
Arnaldo Carvalho de Melo b7f294b58a perf hists browser: The dso can be obtained from popup_action->ms.map->dso
So no need to have a 'dso' member in 'popup_action', remove it as no
code is using it, already.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-76a6s0007slug0op0wkl6o8b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-12 18:58:18 -03:00
Arnaldo Carvalho de Melo fae00650f7 perf hists browser: Fix 'd' hotkey action to filter by DSO
When pressing 'd' the expected action is to filter all entries by the
DSO in the current entry, but for that the action->map needs to be set,
and only action->dso was being set, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 045b80dd03 ("perf hists browser: Use the map to determine if a DSO is being used as a kernel")
Link: http://lkml.kernel.org/n/tip-xqhfzgoblq49lk5h5u82atro@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-12 18:58:17 -03:00
Arnaldo Carvalho de Melo f06cff7c59 perf annotate: Don't die() when finding an invalid config option
The perf_config() infrastructure we inherited from git calls die() when
the provided config callback returns -1, meaning some key in a config
section is unexpected, that seems ok for a stdio based tool, but in
--tui we end up messing up the output, so just tell the user about the
error, wait for a keystroke and return 0, being more resilient and
proceeding with what we managed to parse.

That die() needs to die, tho :-)

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pqtsffh2kwr5mwm4qg9kgotu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-22 18:10:52 -03:00
Arnaldo Carvalho de Melo 464b01a48e perf ui tui: Register the error callbacks before initializing the widgets
I.e. we want to tell the user about errors found during, for instance,
the ui_browser initialization, so that a call to ui__warning() appears
as a window waiting for a key to be pressed.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ederrwizcl6mfz10vfobl5qq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-22 16:44:17 -03:00
Namhyung Kim 39ff7cdb5a perf annotate: Fix 'annotate.use_offset' config variable usage
The annotate__configs should be sorted so that it can use bsearch(3).

However commit 0c4a5bcea4 ("perf annotate: Display total number of
samples with --show-total-period") added a new config item at the end.
This resulted in the 'annotate.use_offset' config variable cannot be
found and perf terminated like below:

  $ perf report
  bad config file line 6 in ~/.perfconfig

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1445396240-3428-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-22 16:34:29 -03:00
Namhyung Kim 31eb436054 perf hists browser: Add 'm' key for context menu display
With horizontal scrolling, the left/right arrow keys are used to scroll
columns and ENTER/ESC keys are used to enter/exit menu.  However if
callchain is recorded, the ENTER key is used to toggle callchain
expansion so there's no way to display menu.  Use 'm' key to display the
menu for this case.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444694521-8136-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-12 23:29:14 -03:00
Arnaldo Carvalho de Melo 4aa8e454d3 perf hists browser: Inform how to reset the symbol filter
When in the hists browser, i.e. in 'perf report' or in 'perf top', it is
possible to press '/' and specify a substring to filter by symbol name.

Clarify how to remove a filter by making the prompt be:

   Please enter the name of symbol you want to see.
   To remove the filter later, press / + ENTER

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vbq2b0kyufwy6p0ctkfswcoe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-12 14:02:29 -03:00
Arnaldo Carvalho de Melo 7727a92544 perf ui browsers: Remove help messages about use of right and arrow keys
They were repurposed for horizontal scrolling, so use just ENTER/ESC in
the help messages.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: c6c3c02dea ("perf hists browser: Implement horizontal scrolling")
Link: http://lkml.kernel.org/n/tip-n5ar4qg8fs12ax4vhr3rxhxj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-12 13:56:50 -03:00
Jiri Olsa 1178bfd41f perf tools: Use hpp_dimension__add_output to register hpp columns
The perf_hpp__init currently does not respect sorting dimensions and the
setup_sorting function could endup queueing same format twice. That
screwed up the perf_hpp__list and got stuck in loop within
perf_hpp__setup_output_field function.

  $ perf report -F +overhead

  0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506
  1506    {

     #0  0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506
     #1  0x00000000004c139d in perf_hpp__same_sort_entry (a=a@entry=0x880440 <perf_hpp.format>, b=b@entry=0x2bb2fe0) at util/sort.c:1380
     #2  0x00000000004f8d3c in perf_hpp__setup_output_field () at ui/hist.c:554
     #3  0x00000000004c1d1e in setup_sorting () at util/sort.c:1984
     #4  0x000000000042efbf in cmd_report (argc=0, argv=0x7ffea5a0e790, prefix=<optimized out>) at builtin-report.c:874
     #5  0x0000000000476f13 in run_builtin (p=p@entry=0x875628 <commands+168>, argc=argc@entry=3, argv=argv@entry=0x7ffea5a0e790) at perf.c:385
     #6  0x000000000047710b in handle_internal_command (argc=3, argv=0x7ffea5a0e790) at perf.c:445
     #7  0x0000000000477176 in run_argv (argcp=argcp@entry=0x7ffea5a0e5fc, argv=argv@entry=0x7ffea5a0e5f0) at perf.c:489
     #8  0x00000000004773e7 in main (argc=3, argv=0x7ffea5a0e790) at perf.c:606

Using hpp_dimension__add_output function to register the output column.
It will also mark the dimension as taken and omit above stuck.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444134312-29136-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 18:04:59 -03:00
Arnaldo Carvalho de Melo c6c3c02dea perf hists browser: Implement horizontal scrolling
Do it using the recently introduced ui_brower scrolling mode, setting
ui_browser.columns to the number of sort columns and then, when
rendering each line, skipping as many initial columns as the user
pressed the right arrow.

As the user presses the left arrow, the ui_browser code will remove the
scrolling counter and the left scrolling takes place.

The right arrow key was an alias for ENTER, so people used to press it
may get a bit annoyed at first, sorry! Ditto for ESC and the left key.

Callchains can be left as is or we can, when rendering the Symbol
column, store the at what position on the screen it is and then
using ui_browser__gotorc() to print it from there, i.e. the callchain
would move around with the symbol.

Leaving it as is, i.e. at a fixed position, close to the left, saves
precious screen real state for it, so I'm inclined to leave it as is
now.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ccqq9sabgfge5dwbqjwh71ij@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-05 17:59:49 -03:00
Arnaldo Carvalho de Melo faae6f690e perf ui browser: Optional horizontal scrolling key binding
If the classes derived from ui_browser want to do some sort of
horizontal scrolling, they have just to set ui_browser->columns to
the number of columns available.

Those columns can be the number of characters on the screen, if what is
desired is to scroll character by character, or the number of columns in
a spreadsheet like table.

This is what the hist_browser will do, skipping ui_browser->horiz_scroll
columns when rendering each of its lines.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-q6a22bpmpgcr1awgzrmd4jrs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-05 17:59:49 -03:00
Arnaldo Carvalho de Melo 045b80dd03 perf hists browser: Use the map to determine if a DSO is being used as a kernel
The map is what should say if an ELF (or some other format) image is
being used for some particular purpose, as a kernel, host or guest.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zufousvfar0710p4qj71c32d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 15:50:54 -03:00
Ingo Molnar d71b0ad8d3 Merge branch 'perf/urgent' into perf/core, to resolve a conflict
Conflicts:
	tools/perf/ui/browsers/hists.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-16 09:19:56 +02:00
Wang Nan bd315aab8a perf top: Fix segfault pressing -> with no hist entries
'perf top' segfaults with following operation:

 # perf top -e page-faults -p 11400 # 11400 never generates page-fault

Then on the resulting empty interface, press right key:

  # ./perf top -e page-faults -p 11400
  perf: Segmentation fault
  -------- backtrace --------
  ./perf[0x535428]
  /lib64/libc.so.6(+0x3545f)[0x7f0dd360745f]
  ./perf[0x531d46]
  ./perf(perf_evlist__tui_browse_hists+0x96)[0x5340d6]
  ./perf[0x44ba2f]
  /lib64/libpthread.so.0(+0x81d0)[0x7f0dd49dc1d0]
  /lib64/libc.so.6(clone+0x6c)[0x7f0dd36b90dc]

The bug resides in perf_evsel__hists_browse() that, in the above
circumstance browser->selection can be NULL, but code after
skip_annotation doesn't consider it.

This patch fix it by checking browser->selection before fetching
browser->selection->map.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1442226235-117265-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-14 15:10:41 -03:00
Kan Liang 84734b06b6 perf hists browser: Zoom in/out for processor socket
Currently, users can zoom in/out for threads and dso in 'perf top' and
'perf report'.

This patch extends it for the processor sockets.

'S' is the short key to zoom into current Processor Socket.

Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441377946-44429-4-git-send-email-kan.liang@intel.com
[ - Made it elide the Socket column when zooming into it,
    just like with the other zoom ops;
  - Make it use browser->pstack, to unzoom level by level;
  - Rename 'socket' variables to 'socket_id' to make it build on
    older systems where it shadows a global glibc declaration ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-14 13:02:08 -03:00
Kan Liang 21394d948a perf report: Introduce --socket-filter option
Introduce --socket-filter option for 'perf report' to only show entries
for a processor socket that match this filter.

  $ perf report --socket-filter 1 --stdio
  # To display the perf.data header info, please use --header/--header-only options.
  #
  # Total Lost Samples: 0
  #
  # Samples: 752  of event 'cycles'
  # Event count (approx.): 350995599
  # Processor Socket: 1
  #
  # Overhead  Command    Shared Object     Symbol
  # ........  .........  ................  .................................
  #
      97.02%  test       test              [.] plusB_c
       0.97%  test       test              [.] plusA_c
       0.23%  swapper    [kernel.vmlinux]  [k] acpi_idle_do_entry
       0.09%  rcu_sched  [kernel.vmlinux]  [k] dyntick_save_progress_counter
       0.01%  swapper    [kernel.vmlinux]  [k] task_waking_fair
       0.00%  swapper    [kernel.vmlinux]  [k] run_timer_softirq

Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441377946-44429-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-14 12:50:31 -03:00
Arnaldo Carvalho de Melo eebd0bfca5 perf env: Rename some leftovers from rename to perf_env
In ce80d3bef9 ("perf tools: Rename perf_session_env to perf_env") we
forgot to rename a few functions to the "perf_env" prefix, do it now.

Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b3ui3z6ock89z1814pu2er98@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-14 12:50:20 -03:00
Kan Liang ce80d3bef9 perf tools: Rename perf_session_env to perf_env
As it is not necessarily tied to a perf.data file and needs using in
places where a perf_session is not required.

Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1440755289-30939-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28 14:53:55 -03:00
Arnaldo Carvalho de Melo 1e259ad4a2 perf ui tui progress: Implement the ui_progress_ops->finish() method
So that we can erase the progress bar after we're done with it, avoiding
things like:

-------------------------------------------------------------------

          ┌─Error:──────────────────────────────────────────────────────┐
          │Can't annotate unmapped_area_topdown:                        │
          │                                                             │
          │No vmlinux file with build id a826726b5ddacfab1f0bade868f1a79│
          │was found in the path.                                       │
          │                                                             │
          │Note that annotation using /proc/kcore requires CAP_SYS_RAWIO│
┌Processin│                                                             │──┐
│         │Please use:                                                  │  │
└─────────│                                                             │──┘
          │  perf buildid-cache -vu vmlinux                             │
          │                                                             │
          │or:                                                          │
          │                                                             │
          │  --vmlinux vmlinux                                          │
          │                                                             │
          │                                                             │
          │Press any key...                                             │
          └─────────────────────────────────────────────────────────────┘

Can't annotate unmapped_area_topdown:
-------------------------------------------------------------------

I.e. that finished progress bar behind the error window. It is not a
problem when we end up redrawing the whole screen, but its ugly when
we present such error windows, provide a TUI method so that code like
the above may avoid this situation, as will be done with the annotation
code in the next cset.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qvktnojzwwe37pweging058t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-24 16:18:26 -03:00
Kan Liang 9e207ddfa2 perf report: Show call graph from reference events
Introduce --show-ref-call-graph for perf report to print reference
callgraph for no callgraph event.

Here is an example.

 perf report --show-ref-call-graph --stdio

 # To display the perf.data header info, please use
 --header/--header-only options.
 #
 #
 # Total Lost Samples: 0
 #
 # Samples: 5  of event 'cpu/cpu-cycles,call-graph=fp/'
 # Event count (approx.): 144985
 #
 # Children      Self  Command  Shared Object     Symbol
 # ........  ........  .......  ................  ........................................
 #
    72.30%     0.00%  sleep    [kernel.vmlinux]  [k] entry_SYSCALL_64_fastpath
              |
              ---entry_SYSCALL_64_fastpath
                 |
                 |--22.62%-- __GI___libc_nanosleep
                  --77.38%-- [...]

......

 # Samples: 6  of event 'cpu/instructions,call-graph=no/', show reference callgraph
 # Event count (approx.): 172780
 #
 # Children      Self  Command  Shared Object     Symbol
 # ........  ........  .......  ................  ........................................
 #
    73.16%     0.00%  sleep    [kernel.vmlinux]  [k] entry_SYSCALL_64_fastpath
              |
              ---entry_SYSCALL_64_fastpath
                 |
                 |--31.44%-- __GI___libc_nanosleep
                  --68.56%-- [...]

Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-12 13:20:28 -03:00
Arnaldo Carvalho de Melo 63ab1749f3 perf hists browser: Make ESC unzoom as well
In addition to <-, that may be repurposed for horizontal scrolling.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w3rctelxr4yxrjufx7z3fclb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-12 12:46:55 -03:00
Arnaldo Carvalho de Melo 517dfdb315 perf ui browser: Introduce ui_browser__printf()
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w0niblabqrkecs4o0eogfy6c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-12 10:27:05 -03:00
Arnaldo Carvalho de Melo 26270a0082 perf ui browser: Introduce ui_browser__write_nstring()
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-437ineavoejzou727mr9bxpi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-12 10:27:04 -03:00
Andi Kleen f8f4aaead5 perf annotate: Finally display IPC and cycle accounting
Add two new columns to the annotate display and display the average
cycles and the compute IPC if available.

When the LBR was not in any branch mode the IPC computation is
automatically disabled. We still display the cycle information.

Example output (with made up numbers):

The second column is the IPC and third average cycles.

                 │    __attribute__((noinline)) f2()
                 │    {
  5.15  0.07     │       push   %rbp
  0.01  0.07     │       mov    %rsp,%rbp
                 │            c = a / b;
  9.87  0.07     │       mov    a,%eax
        0.07     │       mov    b,%ecx
        0.07     │       cltd
  4.92  0.07  123│       idiv   %ecx
 70.79  0.07     │       mov    %eax,__TMC_END__
                 │    }
  9.25  0.07     │       pop    %rbp
  0.01  0.07  123│     ← retq

v2: Fix display problems.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-7-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-06 16:37:22 -03:00
Andi Kleen 30e863bb6f perf annotate: Compute IPC and basic block cycles
Compute the IPC and the basic block cycles for the annotate display.

IPC is computed by counting the instructions, and then dividing the
accounted cycles by that count.

The actual IPC computation can only be done at annotate time, because we
need to parse the objdump output first to know the number of
instructions in the basic block.

The cycles/IPC are also put into the perf function annotation so that
the display code can show them.

Again basic block overlaps are not handled, with the longest winning,
but there are some heuristics to hide the IPC when the longest is not
the most common.

v2: Compute IPC correctly.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-06 16:36:12 -03:00
Arnaldo Carvalho de Melo 9c0fa8dd3d perf hists browser: Take the --comm, --dsos, etc filters into account
At some point:

  commit 2c86c7ca76
  Author: Namhyung Kim <namhyung@kernel.org>
  Date:   Mon Mar 17 18:18:54 2014 -0300

    perf report: Merge al->filtered with hist_entry->filtered

We stopped dropping samples for things filtered via the --comms, --dsos,
--symbols, etc, i.e. things marked as filtered in the symbol resolution
routines (thread__find_addr_map(), perf_event__preprocess_sample(),
etc).

But then, in:

  commit 268397cb2a
  Author: Namhyung Kim <namhyung@kernel.org>
  Date:   Tue Apr 22 14:49:31 2014 +0900

    perf top/tui: Update nr_entries properly after a filter is applied

We don't take into account entries that were filtered in
perf_event__preprocess_sample() and friends, which leads to
inconsistency in the browser seek routines, that expects the number of
hist_entry->filtered entries to match what it thinks is the number of
unfiltered, browsable entries.

So, for instance, when we do:

  perf top --symbols ___non_existent_symbol___

the hist_browser__nr_entries() routine thinks there are no filters in
place, uses the hists->nr_entries but all entries are filtered, leading
to a segfault.

Tested with:

   perf top --symbols malloc,free --percentage=relative

Freezing, by pressing 'f', at any time and doing the math on the
percentages ends up with 100%, ditto for:

   perf top --dsos libpthread-2.20.so,libxul.so --percentage=relative

Both were segfaulting, all fixed now.

More work needed to do away with checking if filters are in place, we
should just use the nr_non_filtered_samples counter, no need to
conditionally use it or hists.nr_filter, as what the browser does is
just show unfiltered stuff. An audit of how it is being accounted is
needed, this is the minimal fix.

Reported-by: Michael Petlan <mpetlan@redhat.com>
Fixes: 268397cb2a ("perf top/tui: Update nr_entries properly after a filter is applied")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6w01d5q97qk0d64kuojme5in@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-13 16:06:09 -03:00
Namhyung Kim 13d1e536b1 perf top: Move toggling event logic into hists browser
Current 'f' key action to enable/disable events won't work if there're
more than one event since perf_evsel_menu__run() doesn't return the key.
So move it to the hists browser loop so that it can be processed as like
other key action, and it's more natural to handle it there IMHO.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1434858076-6533-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-22 11:21:11 -03:00
Arnaldo Carvalho de Melo 3e323dc0a8 perf hists browser: React to unassigned hotkey pressing
When that happens we were just ignoring the key press, now this
message is presented in the bottom line (the help line):

  "Press '?' for help on key bindings"

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iyma2j5kj3q9i1stl4mfh90n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19 18:14:05 -03:00
Arnaldo Carvalho de Melo 5f00b0f45b perf hists browser: Honour the help line provided by builtin-{top,report}.c
The hists_browser was replacing whatever helpline provided by 'top' or
'report' with a static "Press '?' for help on key bindings", fix it.

Now the message passed by top appears at the bottom of the screen:

"For a higher level overview, try: perf top --sort comm,dso"

As well the message that will be added when the user presses 'f' to
disable the events, something along the lines of "press f again to
re-enable...".

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-dacaja70mbfz3a0yj1n180gx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19 17:30:20 -03:00
Arnaldo Carvalho de Melo 516e536849 perf hists browser: Do not exit when 'f' is pressed in 'report' mode
The 'f' hotkey is only used when in 'top', dynamic mode, to
enable/disable events, currently not making sense in the 'report',
static mode, where we can't go from showing the histogram entries
created from a perf.data file to adding more events after recreating the
evlist created from the perf.data file, albeit possible, this is not
implemented right now.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lholzf472pu98dkkijggwx2m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19 16:59:43 -03:00
Arnaldo Carvalho de Melo fbb7997e30 perf top: Replace CTRL+z with 'f' as hotkey for enable/disable events
I.e. 'freeze'/'unfreeze', this is because CTRL+z has a well known
action, i.e. suspend the app, perf needs to follow that convention, that
will be done on a separate patch, tho.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oedcl6ovohara4koig14ayip@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19 16:56:04 -03:00
Martin Liška 0c4a5bcea4 perf annotate: Display total number of samples with --show-total-period
To compare two records on an instruction base, with --show-total-period
option provided, display total number of samples that belong to a line
in assembly language.

New hot key 't' is introduced for 'perf annotate' TUI.

Signed-off-by: Martin Liska <mliska@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/5583E26D.1040407@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-19 16:39:18 -03:00
Arnaldo Carvalho de Melo 5d484f99ae perf top: Allow disabling/enabling events dynamicly
Now it is possible to press CTRL+z at anytime and that will disable the
events being monitored, essentially turning 'top' into 'report', with
pressing CTRL+z again making it enable the events again, returning to
the 'top' behaviour, i.e. dynamic + decaying of older samples.

One may want, for instance, play with:

    -d, --delay <n>       number of seconds to delay between refreshes

and:

    -z, --zero            zero history across updates

Plus CTRL+z to see only the events since last zeroing, etc.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zq7tnh5462blt2yda0bcxh5b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17 16:50:52 -03:00
Namhyung Kim ed42691590 perf tools: Make Ctrl-C stop processing on TUI
It was inconvenient that perf cannot be quit with SIGINT during
processing samples on TUI especially for large data files.

This was because the first argument of SLang_init_tty(), abort_char,
being 0.  The manual says it's the ascii value of the control character
that will be used to generate the interrupt signal [1].  Passing -1
means to use the default value (Ctrl-C).

However, after processing samples, Ctrl-C was used to in other cases as
well - like stepping back from annotate.  So recover the original
behavior after processing.

[1] http://jedsoft.org/slang/doc/html/cslang-6.html#ss6.1

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432904024-13170-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-29 12:49:00 -03:00
Namhyung Kim 3698dab1c8 perf tools: Move TUI-specific fields out of map_symbol
The has_children and unfolded fields don't belong to the struct
map_symbol since they're used by the TUI only.  Move those fields out of
map_symbol since the struct is also used by other places.

This will also help to compact the sizeof struct hist_entry.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429687101-4360-11-git-send-email-namhyung@kernel.org
Link: http://lkml.kernel.org/r/1430837746-5439-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-05 18:13:24 -03:00
Namhyung Kim 6422184b08 perf hists browser: Simplify zooming code using pstack_peek()
Now LEFT key press action can just use do_zoom_dso/thread() code to get
out of the current filter.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429838133-14001-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-05 18:13:23 -03:00
Namhyung Kim ea7cd59233 perf hists browser: Split popup menu actions - part 2
Currently perf_evsel__hists_browse() function spins on a huge loop and
handles many key actions.  Since it's hard to read and modify, let's
split it out into small helper functions.

The add_XXX_opt() functions are to register popup menu item on the
selected entry.  When it adds an item, it also saves related data into
struct popup_action and returns 1 so that it can increase the number of
items (nr_options).

With this change, we can simplify the code just to call selected
callback function without considering various conditions.  A callback
function named do_XXX is called with saved data when the item is
selected by user.

No functional change intended.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429687101-4360-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-05 18:13:20 -03:00
Namhyung Kim bc7cad429b perf hists browser: Split popup menu actions
Currently perf_evsel__hists_browse() function spins on a huge loop and
handles many key actions.  Since it's hard to read and modify, let's
split it out into small helper functions.

This patch introduces do_XXX() functions which corresponds to each goto
label.  This way we can call such functions both from key press actions
and popup menu actions.

No functional change intended.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429687101-4360-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-05 18:13:19 -03:00
Namhyung Kim b1a9ceef72 perf hists browser: Save perf_session_env in the hist_browser
The perf_session_env is to save system informantion at the recording
time to be refered in the hist browser.  So it'd be better to keep in
the struct hist_browser.  This is a preparation to later change.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429687101-4360-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-05 18:13:17 -03:00
Namhyung Kim 01f00a1cd1 perf hists browser: Save pstack in the hist_browser
The struct pstack is to save currently applied thread and/or dso filters
in the browser.  So it'd be better to keep in the struct hist_browser.
This is a preparation to later change.

Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429687101-4360-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-05 18:13:16 -03:00
Namhyung Kim c2a51ab802 perf hists browser: Save hist_browser_timer pointer in hist_browser
The struct hist_browser_timer is to carry perf-top related info
throughout the hist browser code.  So it'd be better to keep in the
struct hist_browser.  This is a preparation to later change.

Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429687101-4360-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-05 18:13:14 -03:00
Namhyung Kim f2b487db45 perf hists browser: Fix possible memory leak
The options array saves strings for each popup menu item.  The number of
items can be vary according to the currently selected item.  So it can
leak some memory if it's exited from a small item.  Fix it by freeing
all items when loop terminates.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429687101-4360-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-05 18:13:13 -03:00
Arnaldo Carvalho de Melo 70e9727888 perf hists browser: Indicate which callchain entries are annotated
Now that we can annotate entries in a callchain, show which ones have an
associated symbol and samples, by adding a right arrow just before the
symbol name when in verbose mode.

To toggle verbose mode press 'V'.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d2rf1p3h5gdp7hdl2gf2bozl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-21 14:53:37 -03:00
Arnaldo Carvalho de Melo d5dbc518cd perf hists browser: Allow annotating entries in callchains
Instead of annotating just the top level hist_entry, allow instead
annotating a map_symbol, i.e. the top level hist_entry or one of the
callchains for which there were samples.

Suggested-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-k1zxj5564je9jei4yd15ouwn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-17 18:27:28 -03:00
Arnaldo Carvalho de Melo 4c47f4fcd6 perf hists: Remove hist_entry->used, not used anymore
Since hist_entry__delete() nowadays doesn't actually frees anything that
may be in use by the annotation code.

Eventually we will solve this for good by reference counting struct
symbol.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uldtgljymtrkns0knpiso5op@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-17 17:18:58 -03:00
Arnaldo Carvalho de Melo 446fb96c4a perf hists browser: Fix up some branch alignment
Those asprintf return checks should be aligned with the other
conditionals, fix it.

Also add {} blocks to further clarify.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
echo Link: http://lkml.kernel.org/n/tip-`ranpwd -l 24`@git.kernel.org
Link: http://lkml.kernel.org/n/tip-nqgs07jfphbkw67wja870d3r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-16 17:46:57 -03:00
Arnaldo Carvalho de Melo 0ba332f70a perf hists browser: Simplify symbol annotation menu setup
No need to repeat some tests, skip annotation instead.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6h6igrb81u4e6rwfmx7dv47n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-16 17:41:52 -03:00
He Kuang 4fabf3d19c perf hists browser: Fix UI bug after fold/unfold
In perf hists browser, the fold/unfold stat of each hist entry is
recorded but hb->nr_callchain_rows loses its value after zoom out and
zoom in back. This causes a wrong row cursor range that restrict user to
move down anymore.

This bug can be reproduced as follows:

  $ perf record -g -e syscalls:* ls
  $ perf report

    Available samples
  ================================================================
    2 syscalls:sys_enter_mprotect <= [enter one of the entries]
    2 syscalls:sys_exit_mprotect
    13 syscalls:sys_enter_brk
    ...

In the hists brower, unfold some of the items, now the cursor can reach
to any rows:

    Children      Self  Command  Shared Object          Symbol
  ================================================================
  -  100.00%   100.00%  ls       libuClibc-0.9.33.2.so  [.] lstat64
  - lstat64
       16.67% 0x6469702e64
       8.33% 0x646970
       8.33% 0x617461
       8.33% 0x65
  -   16.67%     0.00%  ls       [unknown]              [.]0x6469702e64
     0x6469702e64 <= [cursor can reach to bottom line, everything is ok]

Now, zoom back to "Available samples" and enter again:

    Children      Self  Command  Shared Object          Symbol
  ================================================================
  -  100.00%   100.00%  ls       libuClibc-0.9.33.2.so  [.] lstat64
  - lstat64
       16.67% 0x6469702e64
       8.33% 0x646970
       8.33% 0x617461 <= [cursor may stop here, can't move down anymore]
       8.33% 0x65
  -   16.67%     0.00%  ls       [unknown]              [.]0x6469702e64
     0x6469702e64

This patch recalculates hb->nr_callchain_rows to fix the bug.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426144909-18951-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 13:18:38 -03:00
Arnaldo Carvalho de Melo f3b623b849 perf tools: Reference count struct thread
We need to do that to stop accumulating entries in the dead_threads
linked list, i.e. we were keeping references to threads in struct hists
that continue to exist even after a thread exited and was removed from
the machine threads rbtree.

We still keep the dead_threads list, but just for debugging, allowing us
to iterate at any given point over the threads that still are referenced
by things like struct hist_entry.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3ejvfyed0r7ue61dkurzjux4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-03 00:17:08 -03:00
Jiri Olsa 88aeea06eb perf build: Add gtk objects building
Move the gtk objects building under build framework.

Add new gtk build object so it's separated from the rest of the code and
could be librarized.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cd27z7vww85nxdq37rkjkkbm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-12 11:49:12 -03:00
Jiri Olsa cf15c74cbd perf build: Add slang objects building
Move the slang objects building under build framework to be included in
the libperf build object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2ofo1r00jl6i143qxcl9n2jr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-12 11:48:13 -03:00
Jiri Olsa 3b939a631b perf build: Add ui objects building
Move the ui objects building under build framework to be included in the
libperf build object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-re5vuat8uu396n7hyor9b5ve@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-12 11:47:04 -03:00
Namhyung Kim 4397bd2f90 perf ui/tui: Show fatal error message only if exists
When perf exits with some error it shows the error message with
ui__error() or ui__warning() and then calls ui__exit() during
exit_browser().

On TUI, it then shows a window titled "Fatal Error" to inform user a
last message which might be related with this condition.  However it
sometimes contains no message and just annoyes users.

The usual case for this is running perf top as normal user.  (And
/proc/sys/kernel/perf_event_paranoid being 1).

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421736050-5283-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22 17:05:10 -03:00
Namhyung Kim 87bbdf768f perf tools: Pass struct perf_hpp_fmt to its callbacks
Currently ->cmp, ->collapse and ->sort callbacks doesn't pass
corresponding fmt.  But it'll be needed by upcoming changes in
perf diff command.

Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org
[ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21 13:24:34 -03:00
Arnaldo Carvalho de Melo 48000a1aed perf tools: Remove EOL whitespaces
Janitorial stuff: boredom moment.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-u70i7shys3kths4hzru72bha@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21 13:24:31 -03:00
Namhyung Kim c09e31cc12 perf hists browser: Fix segfault when showing callchain
When perf report on TUI shows callchain it checks first node has
siblings to determine whether it needs to print percentage value.

But it missed a case that first node is NULL.  So sometimes it segfaults
like below:

  $ perf top -g
  perf: Segmentation fault
  -------- backtrace --------
  perf[0x4fcefb]
  /usr/lib/libc.so.6(+0x33b20)[0x7f2a35839b20]
  perf(rb_next+0x8)[0x47d3d8]
  perf[0x4f6058]
  perf[0x4f833b]
  perf[0x4f8610]
  perf[0x4f209e]
  perf(ui_browser__run+0x3a)[0x4f2e6a]
  perf[0x4f94ee]
  perf(perf_evlist__tui_browse_hists+0x94)[0x4fbbf4]
  perf[0x444d10]
  /usr/lib/libpthread.so.0(+0x7314)[0x7f2a37070314]
  /usr/lib/libc.so.6(clone+0x6d)[0x7f2a358ee5bd]

  $ addr2line -e `which perf` 0x4f6058
  /home/namhyung/project/linux/tools/perf/ui/browsers/hists.c:553

I don't know why the backtrace didn't print some symbols..

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 4087d11cd9 ("perf hists browser: Print overhead percent value for first-level callchain")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1419401076-21700-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-08 11:59:16 -03:00
Namhyung Kim 5ca8271022 perf hists: Fix children sort key behavior
When perf report --children resorts output fields, it tries to put
caller above the callee.  But this was only meaningful for a same thread
and doing this requires callchain enabled.  So fix its check before
comparing the callchain depth.

This also changes the hist accumulation tests: In test 3, xmalloc in
bash thread should be above than other perf threads due to alphabetical
order of comm string.  Also it's under page_fault in bash thread since
alphabetical order of dso name.  The sys_perf_event_open in perf thread
is put on the last line since it's self overhead is 0.

In test 4, the sys_perf_event_open is put above other perf entries that
have same children overhead since its callchain depth is smaller.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419309381-2593-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-08 11:26:56 -03:00
Namhyung Kim b11bc8e28f perf ui/tui: Print backtrace symbols when segfault occurs
The output will look like below.  (I added an error into ui__init() for
the test).

  $ perf report
  perf: Segmentation fault
  -------- backtrace --------
  perf[0x503781]
  /usr/lib/libc.so.6(+0x33b20)[0x7f1a14f04b20]
  perf(ui__init+0xd5)[0x503645]
  perf(setup_browser+0x97)[0x4ce4e7]
  perf(cmd_report+0xcea)[0x4392ba]
  perf[0x428493]
  perf(main+0x60a)[0x427c0a]
  /usr/lib/libc.so.6(__libc_start_main+0xf0)[0x7f1a14ef1040]
  perf[0x427d29]
  [0x0]

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1419223455-4362-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-12-23 12:05:59 -03:00
Arjun Sreedharan e4e458b45c calloc/xcalloc: Fix argument order
The calloc() and xcalloc() functions takes @nmemb first and then @size.  Fix all w/
pattern "calloc\s*(\s*sizeof".

Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1417866043-1877-1-git-send-email-arjun024@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-12-09 10:06:29 -03:00