Граф коммитов

2582 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds d9978ec568 1) apply, and then revert, the sysfs export of ATA host controller number.
Discussion was continuing after patch application, trying to figure out how
    to best mesh exported data with the installers, boot-time agents and other
    parties that want this info.
 
 2) Merge Zero-Power Optical Device Driver (ZPODD) support, bringing
    the wonderfulness of sane power management to your CD/DVD device.
 
    Includes one SCSI-subsystem patch (with appropriate ACKs),
    adding runtime PM support to 'sr' driver.  That is the ZPODD interaction
    bits.
 
    Patchset went through some 13 revisions before it got here; kudos to
    Intel for persistence.
 
 3) pata_samsung_cf: use devm_clk_get()
 
 4) more ata_piix, ahci PCI IDs
 
 5) Add SATA driver for R-Car SoC
 
 6) Convert libata to use devm_ioremap_resource (Note: I think
    Greg sent this to you, also)
 
 7) Set proper Sense Key (SK) in the SCSI simulator when
    ATA passthrough indicates check condition.  Google and specification
    hawks everywhere shall rejoice.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIVAwUAUSfuQiWzCDIBeCsvAQKiQRAA2CEy9jPvsVlBgeU9sFao94Lw1BmS9Ros
 lHFtAVclA2aSn6IEdDei+z7t2i1fhn4+2jtlI04+azlrA1m/+hsOVc0/xOHW5xNd
 cDtFWIQOtd43iG4fg/WNS8pG9jckwo0dM/Fu9qF4bQIN+7ApQ8ARkexWgV/Ff+c7
 gl0agOb6+kBmFFgIDBtJ720M1r0WkDgfjczlNUwn6izHt6Dmml1EsVKuNSl26ODb
 7xGKj4zcsHgaLJq69p862hSdZoTvsYpyEHFPDoQCEHFgLpdjqHjbLn+AlOZX9gXu
 CUIsiu9+Kn+exomlfXGaRnl9Or+u7RBHAe5tQK1XqGpwtj4YiCoaE82pvRzICGRC
 br71FC6jPP7dxkJK+//c4H3i+FXr2m7zKvRYlwfotLCLaoIv2PW+sNiclaDoL0ID
 rFdwjr7VPW+8MUwH/rklD8Xcfx4Zqk+SpiJP5mYbCXPRvItpE7kl7qBBgD9mF11e
 gqcv3c0h2DR+WN4vizaCksxGryknICuIE4jrXqEHMqhX1BVpaiIzvUbOfuh55ZSd
 J8B1VvywTf7mhbiEa9+8WTihi1j65+WUn2oDXnkxzSMYRMqoxHgmQa9n1UNvKULH
 e8fauFJkKzqjytong29Kc9ALsyjEaBtxg/RUV6AfpQazHuMu/wLhOQCHKPG8AuEv
 PXAklRZAvsA=
 =YvYo
 -----END PGP SIGNATURE-----

Merge tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Pull libata updates from Jeff Garzik:

1) apply, and then revert, the sysfs export of ATA host controller
   number.  Discussion was continuing after patch application, trying to
   figure out how to best mesh exported data with the installers,
   boot-time agents and other parties that want this info.

2) Merge Zero-Power Optical Device Driver (ZPODD) support, bringing the
   wonderfulness of sane power management to your CD/DVD device.

   Includes one SCSI-subsystem patch (with appropriate ACKs), adding
   runtime PM support to 'sr' driver.  That is the ZPODD interaction
   bits.

   Patchset went through some 13 revisions before it got here; kudos to
   Intel for persistence.

3) pata_samsung_cf: use devm_clk_get()

4) more ata_piix, ahci PCI IDs

5) Add SATA driver for R-Car SoC

6) Convert libata to use devm_ioremap_resource (Note: I think Greg sent
   this to you, also)

7) Set proper Sense Key (SK) in the SCSI simulator when ATA passthrough
   indicates check condition.  Google and specification hawks everywhere
   shall rejoice.

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (22 commits)
  [libata] fix smatch warning for zpodd_wake_dev
  [libata] Set proper SK when CK_COND is set.
  [libata] Convert to devm_ioremap_resource()
  libata: add R-Car SATA driver
  ahci: Add Device IDs for Intel Wellsburg PCH
  ata_piix: Add Device IDs for Intel Wellsburg PCH
  [SCSI] remove can_power_off flag from scsi_device
  [libata] scsi: no poll when ODD is powered off
  [SCSI] sr: support runtime pm
  ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs
  ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs
  [libata] PM code cleanup for ata port
  [libata] pm: differentiate system and runtime pm for ata port
  Revert "libata: export host controller number thru /sys"
  libata: do not suspend port if normal ODD is attached
  libata: expose pm qos flags for ata device
  libata: handle power transition of ODD
  libata: check zero power ready status for ZPODD
  libata: move acpi notification code to zpodd
  libata: identify and init ZPODD devices
  ...
2013-02-24 17:32:15 -08:00
Linus Torvalds 9d3cae26ac Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "So from the depth of frozen Minnesota, here's the powerpc pull request
  for 3.9.  It has a few interesting highlights, in addition to the
  usual bunch of bug fixes, minor updates, embedded device tree updates
  and new boards:

   - Hand tuned asm implementation of SHA1 (by Paulus & Michael
     Ellerman)

   - Support for Doorbell interrupts on Power8 (kind of fast
     thread-thread IPIs) by Ian Munsie

   - Long overdue cleanup of the way we handle relocation of our open
     firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard

   - Support for saving/restoring & context switching the PPR (Processor
     Priority Register) on server processors that support it.  This
     allows the kernel to preserve thread priorities established by
     userspace.  By Haren Myneni.

   - DAWR (new watchpoint facility) support on Power8 by Michael Neuling

   - Ability to change the DSCR (Data Stream Control Register) which
     controls cache prefetching on a running process via ptrace by
     Alexey Kardashevskiy

   - Support for context switching the TAR register on Power8 (new
     branch target register meant to be used by some new specific
     userspace perf event interrupt facility which is yet to be enabled)
     by Ian Munsie.

   - Improve preservation of the CFAR register (which captures the
     origin of a branch) on various exception conditions by Paulus.

   - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where
     it belongs by Philippe De Muyter

   - Support for Transactional Memory on Power8 by Michael Neuling
     (based on original work by Matt Evans).  For those curious about
     the feature, the patch contains a pretty good description."

(See commit db8ff907027b: "powerpc: Documentation for transactional
memory on powerpc" for the mentioned description added to the file
Documentation/powerpc/transactional_memory.txt)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits)
  powerpc/kexec: Disable hard IRQ before kexec
  powerpc/85xx: l2sram - Add compatible string for BSC9131 platform
  powerpc/85xx: bsc9131 - Correct typo in SDHC device node
  powerpc/e500/qemu-e500: enable coreint
  powerpc/mpic: allow coreint to be determined by MPIC version
  powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct
  powerpc/85xx: Board support for ppa8548
  powerpc/fsl: remove extraneous DIU platform functions
  arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test
  powerpc: Documentation for transactional memory on powerpc
  powerpc: Add transactional memory to pseries and ppc64 defconfigs
  powerpc: Add config option for transactional memory
  powerpc: Add transactional memory to POWER8 cpu features
  powerpc: Add new transactional memory state to the signal context
  powerpc: Hook in new transactional memory code
  powerpc: Routines for FP/VSX/VMX unavailable during a transaction
  powerpc: Add transactional memory unavaliable execption handler
  powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes
  powerpc: Add FP/VSX and VMX register load functions for transactional memory
  powerpc: Add helper functions for transactional memory context switching
  ...
2013-02-23 17:09:55 -08:00
Linus Torvalds 81ec44a6c6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 update from Martin Schwidefsky:
 "The most prominent change in this patch set is the software dirty bit
  patch for s390.  It removes __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY and
  the page_test_and_clear_dirty primitive which makes the common memory
  management code a bit less obscure.

  Heiko fixed most of the PCI related fallout, more often than not
  missing GENERIC_HARDIRQS dependencies.  Notable is one of the 3270
  patches which adds an export to tty_io to be able to resize a tty.

  The rest is the usual bunch of cleanups and bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits)
  s390/module: Add missing R_390_NONE relocation type
  drivers/gpio: add missing GENERIC_HARDIRQ dependency
  drivers/input: add couple of missing GENERIC_HARDIRQS dependencies
  s390/cleanup: rename SPP to LPP
  s390/mm: implement software dirty bits
  s390/mm: Fix crst upgrade of mmap with MAP_FIXED
  s390/linker skript: discard exit.data at runtime
  drivers/media: add missing GENERIC_HARDIRQS dependency
  s390/bpf,jit: add vlan tag support
  drivers/net,AT91RM9200: add missing GENERIC_HARDIRQS dependency
  iucv: fix kernel panic at reboot
  s390/Kconfig: sort list of arch selected config options
  phylib: remove !S390 dependeny from Kconfig
  uio: remove !S390 dependency from Kconfig
  dasd: fix sysfs cleanup in dasd_generic_remove
  s390/pci: fix hotplug module init
  s390/pci: cleanup clp page allocation
  s390/pci: cleanup clp inline assembly
  s390/perf: cpum_cf: fallback to software sampling events
  s390/mm: provide PAGE_SHARED define
  ...
2013-02-21 17:54:03 -08:00
Linus Torvalds 06991c28f3 Driver core patches for 3.9-rc1
Here is the big driver core merge for 3.9-rc1
 
 There are two major series here, both of which touch lots of drivers all
 over the kernel, and will cause you some merge conflicts:
   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.
   - remove CONFIG_EXPERIMENTAL
 
 If you need me to provide a merged tree to handle these resolutions,
 please let me know.
 
 Other than those patches, there's not much here, some minor fixes and
 updates.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
 weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
 =yWAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...
2013-02-21 12:05:51 -08:00
Aaron Lu 53637e0760 [libata] fix smatch warning for zpodd_wake_dev
Fix a smatch warning caused by an useless pointer check.
The context parameter (aka. ata_dev) will never be NULL until we remove
the acpi notification handler, so it is pointless to check it for NULL.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-02-20 17:14:03 -05:00
Gwendal Grignou 84a9a8cd9d [libata] Set proper SK when CK_COND is set.
When the user application sends a ATA_12 or ATA_16 PASSTHROUGH
scsi command, put the task file register in the sense data with the
proper Sense Key. Instead of NO SENSE, set RECOVERED, as
specified in [SAT2]12.2.5 Table 92.

Tested:
Using udev ata_id to generate a passthrough command, IDENTIFY:
before:
 sd 0:0:0:0: [sda] CDB: ATA command pass through(12)/Blank: \
a1 08 2e 00 01 00 00 00 00 ec 00 00
 sd 0:0:0:0: [sda] Sense Key : No Sense [current] [descriptor]
 Descriptor sense data with sense descriptors (in hex):
         72 00 00 00 00 00 00 0e 09 0c 00 00 00 00 00 3f
         00 18 00 a6 e0 50

after
 sd 0:0:0:0: [sda] CDB: ATA command pass through(12)/Blank: \
a1 08 2e 00 01 00 00 00 00 ec 00 00
 sd 0:0:0:0: [sda]  Sense Key : Recovered Error [current] [descriptor]
 Descriptor sense data with sense descriptors (in hex):
        72 01 00 1d 00 00 00 0e 09 0c 00 00 00 01 00 00
        00 00 00 00 00 50

Signed-off-by: Gwendal Grignou <gwendal@google.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-02-20 17:13:17 -05:00
Thierry Reding 9b2b1ca5b7 [libata] Convert to devm_ioremap_resource()
Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-02-20 17:13:10 -05:00
Vladimir Barinov 163cf81d26 libata: add R-Car SATA driver
Add Renesas R-Car on-chip 3Gbps SATA controller driver.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
[Sergei: few bugs fixed, significant cleanup]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-02-20 17:10:53 -05:00
James Ralston 151743fd8d ahci: Add Device IDs for Intel Wellsburg PCH
This patch adds the AHCI-mode SATA Device IDs for the Intel Wellsburg PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-02-20 17:09:37 -05:00
James Ralston 3aee8bc52c ata_piix: Add Device IDs for Intel Wellsburg PCH
This patch adds the IDE-mode SATA Device IDs for the Intel Wellsburg PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-02-20 17:08:03 -05:00
Linus Torvalds 8793422fd9 ACPI and power management updates for 3.9-rc1
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.
 
 - ACPI power resources handling and ACPI device PM update from
   Rafael J. Wysocki.
 
 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng
   with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and
   Tim Gardner.
 
 - Support for Intel Lynxpoint LPSS from Mika Westerberg.
 
 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.
 
 - cpuidle fixes and cleanups from Daniel Lezcano.
 
 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri
   with contributions from Stratos Karafotis and Rickard Andersson.
 
 - Intel P-states driver for Sandy Bridge processors from
   Dirk Brandewie.
 
 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
 
 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.
 
 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.
 
 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.
 
 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.
 
 - Support for "lightweight suspend" from Zhang Rui.
 
 - Removal of the deprecated power trace API from Paul Gortmaker.
 
 - Assorted updates from Andreas Fleig, Colin Ian King,
   Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei,
   Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo,
   Thomas Renninger, and Yasuaki Ishimatsu.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRIsArAAoJEKhOf7ml8uNsD6MP/j7C4NA+GTq6RdwoJt+Yki0K
 9Ep8I4pEuRFoN/oskv24EyQhpGJIk6UxWcJ/DWFBc+1VhmKORta7k2Idv/wlJA77
 s7AcDveA9xcDh+TVfbh87TeuiMSXiSdDZbiaQO+wMizWJAF3F84AnjiAqqqyQcSK
 bA5/Siz/vWlt9PyYDaQtHTVE4lpvPuVcQdYewsdaH2PsmUjvIg/TUzg28CTrdyvv
 eHOdBK9R0/OLQLhzRbL0VOGJ//wEl+HJRO0QEhTKPgdQ1e/VH/4Zu5WSzF8P/x4C
 s2f8U4IKQqulDuDHXtpMpelFm7hRWgsOqZLkcyXLs+0dvSM9CTPO6P0ZaImxUctk
 5daHWEsXUnCErDQawt1mcZP8l6qnxofMQIfLXyPVzvlSnHyToTmrtXa1v2u4AuL/
 hOo4MYWsFNUmRdtGFFGlExGgEDZ4G5NwiYjRBl/6XJ3v4nhnnMbuzxP8scpoe5m1
 8tjroJHZFUUs/mFU/H+oRbHzSzXPmp1sddNaTg4OpVmTn3DDh6ljnFhiItd1Ndw0
 5ldVbSe6ETq5RoK0TbzvQOeVpa9F3JfqbrXLQPqfd2iz/No41LQYG1uShRYuXKuA
 wfEcc+c9VMd3FILu05pGwBnU8VS9VbxTYMz7xDxg6b29Ywnb7u+Q1ycCk2gFYtkS
 E2oZDuyewTJxaskzYsNr
 =wijn
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:

 - Rework of the ACPI namespace scanning code from Rafael J.  Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.

 - ACPI power resources handling and ACPI device PM update from Rafael
   J Wysocki.

 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
   contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.

 - Support for Intel Lynxpoint LPSS from Mika Westerberg.

 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.

 - cpuidle fixes and cleanups from Daniel Lezcano.

 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
   contributions from Stratos Karafotis and Rickard Andersson.

 - Intel P-states driver for Sandy Bridge processors from Dirk
   Brandewie.

 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.

 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.

 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.

 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.

 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.

 - Support for "lightweight suspend" from Zhang Rui.

 - Removal of the deprecated power trace API from Paul Gortmaker.

 - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
   Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
   Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
   Ishimatsu.

* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
  PM idle: remove global declaration of pm_idle
  unicore32 idle: delete stray pm_idle comment
  openrisc idle: delete pm_idle
  mn10300 idle: delete pm_idle
  microblaze idle: delete pm_idle
  m32r idle: delete pm_idle, and other dead idle code
  ia64 idle: delete pm_idle
  cris idle: delete idle and pm_idle
  ARM64 idle: delete pm_idle
  ARM idle: delete pm_idle
  blackfin idle: delete pm_idle
  sparc idle: rename pm_idle to sparc_idle
  sh idle: rename global pm_idle to static sh_idle
  x86 idle: rename global pm_idle to static x86_idle
  APM idle: register apm_cpu_idle via cpuidle
  cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
  cpufreq / intel_pstate: Change to disallow module build
  tools/power turbostat: display SMI count by default
  intel_idle: export both C1 and C1E
  ACPI / hotplug: Fix concurrency issues and memory leaks
  ...
2013-02-20 11:26:56 -08:00
Benjamin Herrenschmidt dffff02a6b Merge remote-tracking branch 'agust/next' into next
<<
Please pull mpc5xxx patches for v3.9. The bestcomm driver is
moved to drivers/dma (so it will be usable for ColdFire).
mpc5121 now provides common dtsi file and existing mpc5121 device
trees use it. There are some minor clock init and sparse fixes
and updates for various 5200 device tree files from Grant. Some
fixes for bugs in the mpc5121 DIU driver are also included here
(Andrew Morton suggested to push them via my mpc5xxx tree).
>>
2013-02-20 11:39:05 +11:00
Heiko Carstens 0383a68cd2 ata: disable ATA for s390
Add s390 to the list of architectures that don' want ATA.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14 15:55:13 +01:00
Rafael J. Wysocki a9834cb205 Merge branch 'acpi-pm'
* acpi-pm: (35 commits)
  ACPI / PM: Handle missing _PSC in acpi_bus_update_power()
  ACPI / PM: Do not power manage devices in unknown initial states
  ACPI / PM: Fix acpi_bus_get_device() check in drivers/acpi/device_pm.c
  ACPI / PM: Fix /proc/acpi/wakeup for devices w/o bus or parent
  ACPI / PM: Fix consistency check for power resources during resume
  ACPI / PM: Expose lists of device power resources to user space
  sysfs: Functions for adding/removing symlinks to/from attribute groups
  ACPI / PM: Expose current status of ACPI power resources
  ACPI / PM: Expose power states of ACPI devices to user space
  ACPI / scan: Prevent device add uevents from racing with user space
  ACPI / PM: Fix device power state value after transitions to D3cold
  ACPI / PM: Use string "D3cold" to represent ACPI_STATE_D3_COLD
  ACPI / PM: Sanitize checks in acpi_power_on_resources()
  ACPI / PM: Always evaluate _PSn after setting power resources
  ACPI / PM: Introduce helper for executing _PSn methods
  ACPI / PM: Make acpi_bus_init_power() more robust
  ACPI / PM: Fix build for unusual combination of Kconfig options
  ACPI / PM: remove leading whitespace from #ifdef
  ACPI / PM: Consolidate suspend-specific and hibernate-specific code
  ACPI / PM: Move device power management functions to device_pm.c
  ...
2013-02-11 13:20:56 +01:00
Greg Kroah-Hartman 422d26b6ec Merge 3.8-rc5 into driver-core-next
This resolves a gpio driver merge issue pointed out in linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25 21:06:30 -08:00
Aaron Lu 6f4c827e68 [libata] scsi: no poll when ODD is powered off
When the ODD is powered off, any action the user did to the ODD that
would generate a media event will trigger an ACPI interrupt, so the
poll for media event is no longer necessary. And the poll will also
cause a runtime status change, which will stop the ODD from staying in
powered off state, so the poll should better be stopped.

But since we don't have access to the gendisk structure in LLDs, here
comes the disk_events_disable_depth for scsi device. This field is a
hint set by LLDs to convey information to upper layer drivers. A value
of 0 means media poll is necessary for the device, while values above 0
means media poll is not needed and should better be skipped. So we can
increase its value when we are to power off the ODD in ATA layer and
decrease its value when the ODD is powered on, effectively silence the
media events poll.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-25 15:36:43 -05:00
Seth Heasley 29e674dd5c ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs
This patch adds the AHCI and RAID-mode SATA DeviceIDs for the Intel Avoton SOC.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-25 15:34:31 -05:00
Seth Heasley aaa515277d ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs
This patch adds the IDE-mode SATA DeviceIDs for the Intel Avoton SOC.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-25 15:34:30 -05:00
Aaron Lu f5e6d0d0eb [libata] PM code cleanup for ata port
For system freeze, if the port is already runtime suspended, leave it
alone and just return. The port will be resumed on thaw before it will
be used.

And since we will call get_noresume for every device during prepare
phase, and the port is resumed during thaw phase, it can't be in runtime
suspended state during the poweroff phase. So remove the
runtime_suspended check in poweroff callback.

And for all suspend(freeze/suspend/poweroff/etc.), there is no need to
touch the device, so set no_autopsy and no_recovery for them all.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-25 15:33:54 -05:00
Aaron Lu a7ff60dbe0 [libata] pm: differentiate system and runtime pm for ata port
We need to do different things for system PM and runtime PM, e.g. we do
not need to enable runtime wake for ZPODD when we are doing system
suspend, etc.

Currently, we use PMSG_SUSPEND for both system suspend and runtime
suspend and PMSG_ON for both system resume and runtime resume. Change
this by using PMSG_AUTO_SUSPEND for runtime suspend and PMSG_AUTO_RESUME
for runtime resume. And since PMSG_ON means no transition, it is changed
to PMSG_RESUME for ata port's system resume.

The ata_acpi_set_state is modified accordingly, and the sata case and
pata case is seperated for easy reading.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-25 15:33:33 -05:00
Jeff Garzik e175435ed2 Revert "libata: export host controller number thru /sys"
This reverts commit 1757d902b0.

Discussion continues upstream.
2013-01-25 15:30:23 -05:00
Thierry Reding 93316e263a ata: Convert to devm_ioremap_resource()
Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25 12:21:46 -08:00
Alexander Gordeev 5ca72c4f7c AHCI: Support multiple MSIs
Take advantage of multiple MSIs implementation on x86 - on
systems with IRQ remapping AHCI ports not only get assigned
separate MSI vectors - but also separate IRQs. As result,
interrupts generated by different ports could be serviced on
different CPUs rather than on a single one.

In cases when number of allocated MSIs is less than requested
the Sharing Last MSI mode does not get used, no matter
implemented in hardware or not. Instead, the driver assumes the
advantage of multiple MSIs is negated and falls back to the
single MSI mode as if MRSM bit was set (some Intel chips
implement this strategy anyway - MRSM bit gets set even if the
number of allocated MSIs exceeds the number of implemented ports).

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/15bf7ee314dd55f21ec7d2a01c47613cd8190a7c.1353324359.git.agordeev@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-24 17:25:13 +01:00
Kees Cook 48b3de2191 drivers/ata: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21 14:52:42 -08:00
Aaron Lu 7e15e9be37 libata: do not suspend port if normal ODD is attached
For ODDs, the upper layer will poll for media change every few
seconds, which will make it enter and leave suspend state very
often. And as each suspend will also cause a hard/soft reset,
the gain of runtime suspend is very little while the ODD may
malfunction after constantly being reset. So the idle callback
here will not proceed to suspend if a non-ZPODD capable ODD is
attached to the port.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-21 15:42:21 -05:00
Aaron Lu a59b9aae23 libata: expose pm qos flags for ata device
Expose pm qos flags to user space so that user has a chance to disable
ZPODD feature, if he/she has a broken platform or devices or simply does
not like this feature.

This flag is exposed to user space only for ZPODD devices.

Due to this flag, it is possible the ODD is ZP ready but we didn't power
it off. So the zp_ready flag will need to be cleared whenever we found
the ODD is not in ZP ready state. Previously, once zp_ready is set, the
ODD will always be powered off and the flag will be cleared in
post_poweron. But this is no longer the case now.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-21 15:42:15 -05:00
Aaron Lu 213342053d libata: handle power transition of ODD
When ata port is runtime suspended, it will check if the ODD attched to
it is a zero power(ZP) capable ODD and if the ZP capable ODD is in zero
power ready state. And if this is not the case, the highest acpi state
will be limited to ACPI_STATE_D3_HOT to avoid powering off the ODD. And
if the ODD can be powered off, runtime wake capability needs to be
enabled and powered_off flag will be set to let resume code knows that
the ODD was in powered off state.

And on resume, before it is powered on, if it was powered off during
suspend, runtime wake capability needs to be disabled. After it is
recovered, the ODD is considered functional, post power on processing
like eject tray if the ODD is drawer type is done, and several ZPODD
related fields will also be reset.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-21 15:41:56 -05:00
Aaron Lu 3dc67440d9 libata: check zero power ready status for ZPODD
Per the Mount Fuji spec, the ODD is considered zero power ready when:
  - For slot type ODD, no media inside;
  - For tray type ODD, no media inside and tray closed.

The information can be retrieved by either the returned information of
command GET_EVENT_STATUS_NOTIFICATION(the command is used to poll for
media event) or sense code.

The information provided by the media status byte is not accurate, it
is possible that after a new disc is just inserted, the status byte
still returns media not present. So this information can not be used as
the deciding factor, we use sense code to decide if zpready status is
true.

When we first sensed the ODD in the zero power ready state, the
zp_sampled will be set and timestamp will be recoreded. And after ODD
stayed in this state for some pre-defined period, the ODD is considered
as power off ready and the zp_ready flag will be set. The zp_ready flag
serves as the deciding factor other code will use to see if power off is
OK for the ODD.

The Mount Fuji spec suggests a delay should be used here, to avoid the
case user ejects the ODD and then instantly inserts a new one again, so
that we can avoid a power transition. And some ODDs may be slow to place
its head to the home position after disc is ejected, so a delay here is
generally a good idea. And the delay time can be changed via the module
param zpodd_poweroff_delay.

The zero power ready status check is performed in the ata port's runtime
suspend code path, when port is not frozen yet, as we need to issue some
IOs to the ODD.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-21 15:41:34 -05:00
Aaron Lu f064a20dde libata: move acpi notification code to zpodd
Since the ata acpi notification code introduced in commit
3bd46600a7 is solely for ZPODD, and we
now have a dedicated place for it, move these code there.

And the ata_acpi_add_pm_notifier code is changed a little bit in that it
is now invoked when scsi device is not bound with ACPI yet, so the way
to get the acpi handle is different with the previous version. And the
ata_acpi_add/remove_pm_notifier is also simplified a little bit in that
it doesn't check if the acpi_device for the handle exists or not as the
odd_can_poweroff function already checked that.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-21 15:41:12 -05:00
Aaron Lu afe7595118 libata: identify and init ZPODD devices
The ODD can be enabled for ZPODD if the following three conditions are
satisfied:
1 The ODD supports device attention;
2 The platform can runtime power off the ODD through ACPI;
3 The ODD is either slot type or drawer type.
For such ODDs, zpodd_init is called and a new structure is allocated for
it to store ZPODD related stuffs.

And the zpodd_dev_enabled function is used to test if ZPODD is currently
enabled for this ODD.

A new config CONFIG_SATA_ZPODD is added to selectively build ZPODD code.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-21 15:40:35 -05:00
Rafael J. Wysocki bc9b6407bd ACPI / PM: Rework the handling of devices depending on power resources
Commit 0090def6 (ACPI: Add interface to register/unregister device
to/from power resources) made it possible to indicate to the ACPI
core that if the given device depends on any power resources, then
it should be resumed as soon as all of the power resources required
by it to transition to the D0 power state have been turned on.

Unfortunately, however, this was a mistake, because all devices
depending on power resources should be treated this way (i.e. they
should be resumed when all power resources required by their D0
state have been turned on) and for the majority of those devices
the ACPI core can figure out by itself which (physical) devices
depend on what power resources.

For this reason, replace the code added by commit 0090def6 with a
new, much more straightforward, mechanism that will be used
internally by the ACPI core and remove all references to that code
from kernel subsystems using ACPI.

For the cases when there are (physical) devices that should be
resumed whenever a not directly related ACPI device node goes into
D0 as a result of power resources configuration changes, like in
the SATA case, add two new routines, acpi_dev_pm_add_dependent()
and acpi_dev_pm_remove_dependent(), allowing subsystems to manage
such dependencies.  Convert the SATA subsystem to use the new
functions accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17 14:11:05 +01:00
David Milburn 1757d902b0 libata: export host controller number thru /sys
As low-level drivers register their host controller(s), keep track
of the number of controllers and export thru /sys in a <host.port>
format so that udev can better match up port numbers with a
specific controller.

# pwd
/sys/devices/pci0000:00
# find . -name 'ata*' -print

(2nd controller with port multiplier attached)

./0000:00:1e.0/0000:05:01.0/ata2.7
./0000:00:1e.0/0000:05:01.0/ata2.7/link7/dev7.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.0/dev7.0.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.0/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.1/dev7.1.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.1/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.2/dev7.2.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.2/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.3/dev7.3.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.3/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.4/dev7.4.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.4/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.5/dev7.5.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.5/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.6/dev7.6.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.6/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.7/dev7.7.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.7/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.8/dev7.8.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.8/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.9/dev7.9.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.9/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/ata_port
./0000:00:1e.0/0000:05:01.0/ata2.7/ata_port/ata2.7
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.10/dev7.10.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.10/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.11/dev7.11.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.11/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.12/dev7.12.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.12/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.13/dev7.13.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.13/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.14/dev7.14.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.7/link7.14/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.8
./0000:00:1e.0/0000:05:01.0/ata2.8/link8/dev8.0/ata_device
./0000:00:1e.0/0000:05:01.0/ata2.8/link8/ata_link
./0000:00:1e.0/0000:05:01.0/ata2.8/ata_port
./0000:00:1e.0/0000:05:01.0/ata2.8/ata_port/ata2.8

(1st controller)

./0000:00:1f.2/ata1.1
./0000:00:1f.2/ata1.1/link1/dev1.0/ata_device
./0000:00:1f.2/ata1.1/link1/ata_link
./0000:00:1f.2/ata1.1/ata_port
./0000:00:1f.2/ata1.1/ata_port/ata1.1
./0000:00:1f.2/ata1.2
./0000:00:1f.2/ata1.2/link2/dev2.0/ata_device
./0000:00:1f.2/ata1.2/link2/ata_link
./0000:00:1f.2/ata1.2/ata_port
./0000:00:1f.2/ata1.2/ata_port/ata1.2
./0000:00:1f.2/ata1.3
./0000:00:1f.2/ata1.3/link3/dev3.0/ata_device
./0000:00:1f.2/ata1.3/link3/ata_link
./0000:00:1f.2/ata1.3/ata_port
./0000:00:1f.2/ata1.3/ata_port/ata1.3
./0000:00:1f.2/ata1.4
./0000:00:1f.2/ata1.4/link4/dev4.0/ata_device
./0000:00:1f.2/ata1.4/link4/ata_link
./0000:00:1f.2/ata1.4/ata_port
./0000:00:1f.2/ata1.4/ata_port/ata1.4
./0000:00:1f.2/ata1.5
./0000:00:1f.2/ata1.5/link5/dev5.0/ata_device
./0000:00:1f.2/ata1.5/link5/ata_link
./0000:00:1f.2/ata1.5/ata_port
./0000:00:1f.2/ata1.5/ata_port/ata1.5
./0000:00:1f.2/ata1.6
./0000:00:1f.2/ata1.6/link6/dev6.0/ata_device
./0000:00:1f.2/ata1.6/link6/ata_link
./0000:00:1f.2/ata1.6/ata_port
./0000:00:1f.2/ata1.6/ata_port/ata1.6

Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-14 13:31:21 -05:00
Jingoo Han 25effc3647 pata_samsung_cf: Use devm_clk_get()
Use devm_clk_get() rather than clk_get() to make cleanup paths
more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-14 13:31:19 -05:00
Shane Huang 803739d25c [libata] replace sata_settings with devslp_timing
NCQ capability was used to check availability of SATA Settings page
from Identify Device Data Log, which contains DevSlp timing variables.
It does not work on some HDDs and leads to error messages.

IDENTIFY word 78 bit 5(Hardware Feature Control) can't work either
because it is only the sufficient condition of Identify Device data
log, not the necessary condition.

This patch replaced ata_device->sata_settings with ->devslp_timing
to only save DevSlp timing variables(8 bytes), instead of the whole
SATA Settings page(512 bytes).

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=51881

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Shane Huang <shane.huang@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-14 13:29:15 -05:00
Hugh Daschbach 7f9c9f8e24 [libata] ahci: Add support for Enmotus Bobcat device.
Silicon does not support standard AHCI BAR assignment.  Add
vendor/device exception to force BAR 2.

Signed-off-by: Hugh Daschbach <hugh.daschbach@enmotus.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-14 13:21:12 -05:00
Bian Yu 1eaca39a84 [libata] ahci: Fix lack of command retry after a success error handler.
It should be a mistake introduced by commit 8d899e70c1.

qc->flags can't be set AC_ERR_*

Signed-off-by: Bian Yu <bianyu@kedacom.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-14 13:05:17 -05:00
Greg Kroah-Hartman 0ec2491467 Drivers: ata: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:03 -08:00
Philippe De Muyter 9a32299394 powerpc, dma: move bestcomm driver from arch/powerpc/sysdev to drivers/dma
The bestcomm dma hardware, and some of its users like the FEC ethernet
component, is used in different FreeScale parts, including non-powerpc
parts like the ColdFire MCF547x & MCF548x families.  Don't keep the
driver hidden in arch/powerpc where it is inaccessible for other arches.
.c files are moved to drivers/dma/bestcomm, while .h files are moved to
include/linux/fsl/bestcomm.  Makefiles, Kconfigs and #include directives
are updated for the new file locations.

Tested by recompiling for MPC5200 with all bestcomm users enabled.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-01-03 15:41:20 +01:00
Linus Torvalds c13e69b2f0 1) More ACPI fixes
2) ata_piix: cosmetic code movement, re-enable MS Virtual PC support
 
 3) generic platform driver improvements; use common code
 
 4) pata_cs5536: add quirk for broken udma
 
 5) printk prettiness (dev_printk becomes dev_info, etc.)
 
 6) sata_promise: fix hardreset lockdep error
 
 7) minor cleanups from Sergei Shtylyov
 
 8) minor, automated cleanups from Wei Yongjun
 
 9) fix null ptr deref bug, in sysfs API
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUMs8GiWzCDIBeCsvAQKZVA//ZwRVE/AYM+LWFGZP2mxj5Mv5CjhW5EFQ
 1gaB7UlLFQfW993KapkMt5hvd88/VPw3gRELHbSbq0zS7of2Lpntw3xoYhmvEdN6
 Ur0qzVZ61uGful+Gfzgv2VYgt/llsDY6FBNpYVAYfYLcWQDlLA+5mImdwmL8Wjfr
 F32228lkG/g6eTTxpd5yTrQyPsv8hgiwLTdS6zm9AsqiViDE4AYRcEtweb3DcQ3E
 XGQm0KjG0efAyvDMHUfgslIf+OdN/zrdK4uRCOZV4BCMrAavwHaBAyEdX9NlQBrI
 zLfgpmsEmd6Q3H5tMTA3PbDsa7AZEXM4IPuVBIc0l9idz2RcWjEjkSmgIx9SlFJS
 rA+wq8vkE03T80RC/Y6lHvYiF/aL+ljdiJk71359nmmruvsd8Y17BVkMC8cJuTOY
 ibb1lGfw/smjv2o0qJc9D3FMUnX8zwZFkVV1qgkgBX2p+b/FGE97/YJEkMr2+cvY
 Bi9vA2eQRvC11YKGuaSTc0oB6GjJvGhuak2A7k0B9TlmzCKCXjmjLr94wsfZawcm
 oTmb2/3kQLMrplNoCpMku6IlB9OCjICmu7AaD1LbRrk9EkM54Kc64o7gqF6fq7aY
 Vll+g7MWhG/RQRZBgoYTo9QzAaeH2Gib/nyVMxEI7GVv1lI6U2AfhRijM1eP8OKQ
 Bk+p7FulgxY=
 =zb5J
 -----END PGP SIGNATURE-----

Merge tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Pull libata updates from Jeff Garzik:

 - More ACPI fixes

 - ata_piix: cosmetic code movement, re-enable MS Virtual PC support

 - generic platform driver improvements; use common code

 - pata_cs5536: add quirk for broken udma

 - printk prettiness (dev_printk becomes dev_info, etc.)

 - sata_promise: fix hardreset lockdep error

 - minor cleanups from Sergei Shtylyov

 - minor, automated cleanups from Wei Yongjun

 - fix null ptr deref bug, in sysfs API

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (37 commits)
  sata_dwc_460ex: remove file exec bit (chmod 0755 -> 0644)
  [libata] fix Null pointer dereference on disk error
  ahci: convert ata_link_printk() to ata_link_warn()
  pata_imx: convert ata_dev_printk() to ata_dev_info()
  ARM: ep93xx: convert ata_<foo>_printk() to ata_<foo>_<level>()
  ahci_platform: make structs static
  Revert "pata_octeon_cf: perform host detach, removal on exit"
  Revert "libata: check SATA_SETTINGS log with HW Feature Ctrl"
  pata_of_platform: fix compile error
  libata: use pci_get_drvdata() helper
  pata_octeon_cf: perform host detach, removal on exit
  sata_highbank: utilize common ata_platform_remove_one()
  pata_palmld: utilize common ata_platform_remove_one()
  pata_platform: remove unused remove function
  pata_platform: utilize common ata_platform_remove_one()
  pata_of_platform: utilize common ata_platform_remove_one()
  pata_mpc52xx: utilize common ata_platform_remove_one()
  pata_ixp4xx_cf: utilize common ata_platform_remove_one()
  ahci_platform: utilize common ata_platform_remove_one()
  libata: implement ata_platform_remove_one()
  ...
2012-12-15 12:37:18 -08:00
Linus Torvalds cebfa85eb8 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "The MIPS bits for 3.8.  This also includes a bunch fixes that were
  sitting in the linux-mips.org git tree for a long time.  This pull
  request contains updates to several OCTEON drivers and the board
  support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B,
  updates to the SSB bus support, MIPS kexec code and adds support for
  kdump.

  When pulling this, there are two expected merge conflicts in
  include/linux/bcma/bcma_driver_chipcommon.h which are trivial to
  resolve, just remove the conflict markers and keep both alternatives."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits)
  MIPS: PMC-Sierra Yosemite: Remove support.
  VIDEO: Newport Fix console crashes
  MIPS: wrppmc: Fix build of PCI code.
  MIPS: IP22/IP28: Fix build of EISA code.
  MIPS: RB532: Fix build of prom code.
  MIPS: PowerTV: Fix build.
  MIPS: IP27: Correct fucked grammar in ops-bridge.c
  MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled
  MIPS: Fix potencial corruption
  MIPS: Fix for warning from FPU emulation code
  MIPS: Handle COP3 Unusable exception as COP1X for FP emulation
  MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
  MIPS: Remove unused smvp.h
  MIPS/EDAC: Improve OCTEON EDAC support.
  MIPS: OCTEON: Add definitions for OCTEON memory contoller registers.
  MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h
  ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
  MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
  MIPS: Remove usage of CEVT_R4K_LIB config option.
  ...
2012-12-14 14:27:45 -08:00
Jeff Garzik 72d5f2da2c sata_dwc_460ex: remove file exec bit (chmod 0755 -> 0644)
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:43:39 -05:00
Xiaotian Feng 26cd4d65de [libata] fix Null pointer dereference on disk error
Following oops were observed when disk error happened:

[ 4272.896937] sd 0:0:0:0: [sda] Unhandled error code
[ 4272.896939] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 4272.896942] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 5a de a7 00 00 08 00
[ 4272.896951] end_request: I/O error, dev sda, sector 5955239
[ 4291.574947] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 4291.658305] IP: [] ahci_activity_show+0x1/0x40
[ 4291.730090] PGD 76dbbc067 PUD 6c4fba067 PMD 0
[ 4291.783408] Oops: 0000 [#1] SMP
[ 4291.822100] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/sw_activity
[ 4291.934235] CPU 9
[ 4291.958301] Pid: 27942, comm: hwinfo ......

ata_scsi_find_dev could return NULL, so ata_scsi_activity_{show,store} should check if atadev is NULL.

Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:40:34 -05:00
Wei Yongjun 39f80acb9f ahci: convert ata_link_printk() to ata_link_warn()
Using ata_link_warn() instead of ata_link_printk().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:38:50 -05:00
Wei Yongjun 22c8be3144 pata_imx: convert ata_dev_printk() to ata_dev_info()
Using ata_dev_info() instead of ata_dev_printk().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:38:46 -05:00
Wei Yongjun 99da09fcc5 ARM: ep93xx: convert ata_<foo>_printk() to ata_<foo>_<level>()
Using ata_<foo>_<level>() instead of ata_<foo>_printk().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:38:42 -05:00
Brian Norris 071d3ad374 ahci_platform: make structs static
These structs are used only for ahci_platform.c, so they should be
static. Thanks to Fengguang for the (automated) suggestion.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:38:17 -05:00
Jeff Garzik 11ace0c1de Revert "pata_octeon_cf: perform host detach, removal on exit"
This reverts commit 1645bf1b51.

Brian Norris writes:
  > David Daney writes:

  > I can seem to find it.  Without knowing what that does, I would be inclined
  > to NACK the whole thing.

  A NACK is probably the right thing. I was mostly converting a few
  other drivers which used some simple, common patterns to use my new
  common code, but this driver was missing it altogether. It looks like
  there may be bigger issues, though, as you point out.

  > This patch is likely to be incomplete as the driver is also missing the
  > module_exit() things.
  >
  > It might be simpler to just make the driver "bool" instead of "tristate" in
  > the Kconfig.

  As noted earlier, I don't have much interest in this driver. I agree
  that there are some other issues with the driver; I think it leaks
  memory if it is ever allowed to unload, for one. Feel free to submit
  an alternative patch to prevent this driver from being built as a
  module.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:35:51 -05:00
Jeff Garzik 8349e5aeaa Revert "libata: check SATA_SETTINGS log with HW Feature Ctrl"
This reverts commit de90cd71f6.

Shane Huang writes:

  Please suspend this patch because I just received two new
  DevSlp drives but found word 78 bit 5 is _not_ set.

  I'm checking with the drive vendor whether he gave me
  the wrong information. If bit 5 is not the necessary and
  sufficient condition, I will implement another patch to
  replace ata_device->sata_settings into ->devslp_timing.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:34:01 -05:00
David Daney 1007c4bc0f ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
We need to set the 'endian' bit in this case.

Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David Daney <david.daney@cavium.com>
2012-12-13 18:15:25 +01:00
David Daney 43f01da0f2 MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
The patch needs to eliminate the definition of OCTEON_IRQ_BOOTDMA so
that the device tree code can map the interrupt, so in order to not
temporarily break things, we do a single patch to both the interrupt
registration code and the pata_octeon_cf driver.

Also rolled in is a conversion to use hrtimers and corrections to the
timing calculations.

Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David Daney <david.daney@cavium.com>
2012-12-13 18:15:24 +01:00