Граф коммитов

1161 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 2ce7598c9a Linux 3.17-rc4 2014-09-07 16:09:43 -07:00
Linus Torvalds 69e273c0b0 Linux 3.17-rc3 2014-08-31 18:23:04 -07:00
Bertrand Jacquin beb50df39e kbuild: handle module compression while running 'make modules_install'.
Since module-init-tools (gzip) and kmod (gzip and xz) support compressed
modules, it could be useful to include a support for compressing modules
right after having them installed. Doing this in kbuild instead of per
distro can permit to make this kind of usage more generic.

This patch add a Kconfig entry to "Enable loadable module support" menu
and let you choose to compress using gzip (default) or xz.

Both gzip and xz does not used any extra -[1-9] option since Andi Kleen
and Rusty Russell prove no gain is made using them. gzip is called with -n
argument to avoid storing original filename inside compressed file, that
way we can save some more bytes.

On a v3.16 kernel, 'make allmodconfig' generated 4680 modules for a
total of 378MB (no strip, no sign, no compress), the following table
shows observed disk space gain based on the allmodconfig .config :

       |           time                |
       +-------------+-----------------+
       | manual .ko  |       make      | size | percent
       | compression | modules_install |      | gain
       +-------------+-----------------+------+--------
  -    |             |     18.61s      | 378M |
  GZIP |   3m16s     |     3m37s       | 102M | 73.41%
  XZ   |   5m22s     |     5m39s       |  77M | 79.83%

The gain for restricted environnement seems to be interesting while
uncompress can be time consuming but happens only while loading a module,
that is generally done only once.

This is fully compatible with signed modules while the signed module is
compressed. module-init-tools or kmod handles decompression
and provide to other layer the uncompressed but signed payload.

Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Bertrand Jacquin <beber@meleeweb.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-08-27 21:54:12 +09:30
Linus Torvalds 52addcf9d6 Linux 3.17-rc2 2014-08-25 15:36:20 -07:00
Linus Torvalds 7d1311b93e Linux 3.17-rc1 2014-08-16 10:40:26 -06:00
Linus Torvalds 899552d6e8 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:
 "This is the non-critical part of kbuild for 3.17-rc1:

   - make help hint to use make -s with make kernelrelease et al.
   - moved a kbuild document to Documentation/kbuild where it belongs
   - four new Coccinelle scripts, one dropped and one fixed
   - new make kselftest target to run various tests on the kernel"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: kselftest - new make target to build and run kernel selftests
  Coccinelle: Script to replace if and BUG with BUG_ON
  Coccinelle: Script to detect incorrect argument to sizeof
  Coccinelle: Script to use ARRAY_SIZE instead of division of two sizeofs
  Coccinelle: Script to detect cast after memory allocation
  coccinelle/null: solve parse error
  Documentation: headers_install.txt is part of kbuild
  kbuild: make -s should be used with kernelrelease/kernelversion/image_name
2014-08-14 11:14:29 -06:00
Linus Torvalds 3b7b3e6ec5 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:
 - make clean also considers $(extra-m) and $(extra-) to be consistent
 - cleanup and fixes in scripts/Makefile.host
 - allow to override the name of the Python 2 executable with make
   PYTHON=... (only needed for ia64 in practice)
 - option to split debugingo into *.dwo files to save disk space if the
   compiler supports it (CONFIG_DEBUG_INFO_SPLIT)
 - option to use dwarf4 debuginfo if the compiler supports it
   (CONFIG_DEBUG_INFO_DWARF4)
 - fix for disabling certain warnings with clang
 - fix for unneeded rebuild with dash when a command contains
   backslashes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Fix handling of backslashes in *.cmd files
  kbuild, LLVMLinux: Supress warnings unless W=1-3
  Kbuild: Add a option to enable dwarf4 v2
  kbuild: Support split debug info v4
  kbuild: allow to override Python command name
  kbuild: clean-up and bug fix of scripts/Makefile.host
  kbuild: clean up scripts/Makefile.host
  kbuild: drop shared library support from Makefile.host
  kbuild: fix a bug of C++ host program handling
  kbuild: fix a typo in scripts/Makefile.host
  scripts/Makefile.clean: clean also $(extra-m) and $(extra-)
2014-08-14 11:12:46 -06:00
Shuah Khan 5a5da78b3a kbuild: kselftest - new make target to build and run kernel selftests
Add a new make target "kselftest" to enable kernel testing. This
new target builds and runs kernel selftests. Running as root is
recommended for a complete test run as some tests don't run when
run by non-root user. Build, install, and boot kernel before
running kselftest on it.

Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-08-07 22:30:01 +02:00
Jiri Kosina 69102311a5 ./Makefile: tell gcc optimizer to never introduce new data races
We have been chasing a memory corruption bug, which turned out to be
caused by very old gcc (4.3.4), which happily turned conditional load
into a non-conditional one, and that broke correctness (the condition
was met only if lock was held) and corrupted memory.

This particular problem with that particular code did not happen when
never gccs were used.  I've brought this up with our gcc folks, as I
wanted to make sure that this can't really happen again, and it turns
out it actually can.

Quoting Martin Jambor <mjambor@suse.cz>:
 "More current GCCs are more careful when it comes to replacing a
  conditional load with a non-conditional one, most notably they check
  that a store happens in each iteration of _a_ loop but they assume
  loops are executed.  They also perform a simple check whether the
  store cannot trap which currently passes only for non-const
  variables.  A simple testcase demonstrating it on an x86_64 is for
  example the following:

  $ cat cond_store.c

  int g_1 = 1;

  int g_2[1024] __attribute__((section ("safe_section"), aligned (4096)));

  int c = 4;

  int __attribute__ ((noinline))
  foo (void)
  {
    int l;
    for (l = 0; (l != 4); l++) {
      if (g_1)
        return l;
      for (g_2[0] = 0; (g_2[0] >= 26); ++g_2[0])
        ;
    }
    return 2;
  }

  int main (int argc, char* argv[])
  {
    if (mprotect (g_2, sizeof(g_2), PROT_READ) == -1)
      {
        int e = errno;
        error (e, e, "mprotect error %i", e);
      }
    foo ();
    __builtin_printf("OK\n");
    return 0;
  }
  /* EOF */
  $ ~/gcc/trunk/inst/bin/gcc cond_store.c -O2 --param allow-store-data-races=0
  $ ./a.out
  OK
  $ ~/gcc/trunk/inst/bin/gcc cond_store.c -O2 --param allow-store-data-races=1
  $ ./a.out
  Segmentation fault

  The testcase fails the same at least with 4.9, 4.8 and 4.7.  Therefore
  I would suggest building kernels with this parameter set to zero. I
  also agree with Jikos that the default should be changed for -O2.  I
  have run most of the SPEC 2k6 CPU benchmarks (gamess and dealII
  failed, at -O2, not sure why) compiled with and without this option
  and did not see any real difference between respective run-times"

Hopefully the default will be changed in newer gccs, but let's force it
for kernel builds so that we are on a safe side even when older gcc are
used.

The code in question was out-of-tree printk-in-NMI (yeah, surprise
suprise, once again) patch written by Petr Mladek, let me quote his
comment from our internal bugzilla:

 "I have spent few days investigating inconsistent state of kernel ring buffer.
  It went out that it was caused by speculative store generated by
  gcc-4.3.4.

  The problem is in assembly generated for make_free_space(). The functions is
  called the following way:

  + vprintk_emit();
      + log = MAIN_LOG; // with logbuf_lock
         or
         log = NMI_LOG; // with nmi_logbuf_lock
         cont_add(log, ...);
          + cont_flush(log, ...);
              + log_store(log, ...);
                    + log_make_free_space(log, ...);

  If called with log = NMI_LOG then only nmi_log_* global variables are safe to
  modify but the generated code does store also into (main_)log_* global
  variables:

  <log_make_free_space>:
         55                      push   %rbp
         89 f6                   mov    %esi,%esi

         48 8b 05 03 99 51 01    mov    0x1519903(%rip),%rax       # ffffffff82620868 <nmi_log_next_id>
         44 8b 1d ec 98 51 01    mov    0x15198ec(%rip),%r11d      # ffffffff82620858 <log_next_idx>
         8b 35 36 60 14 01       mov    0x1146036(%rip),%esi       # ffffffff8224cfa8 <log_buf_len>
         44 8b 35 33 60 14 01    mov    0x1146033(%rip),%r14d      # ffffffff8224cfac <nmi_log_buf_len>
         4c 8b 2d d0 98 51 01    mov    0x15198d0(%rip),%r13       # ffffffff82620850 <log_next_seq>
         4c 8b 25 11 61 14 01    mov    0x1146111(%rip),%r12       # ffffffff8224d098 <log_buf>
         49 89 c2                mov    %rax,%r10
         48 21 c2                and    %rax,%rdx
         48 8b 1d 0c 99 55 01    mov    0x155990c(%rip),%rbx       # ffffffff826608a0 <nmi_log_buf>
         49 c1 ea 20             shr    $0x20,%r10
         48 89 55 d0             mov    %rdx,-0x30(%rbp)
         44 29 de                sub    %r11d,%esi
         45 29 d6                sub    %r10d,%r14d
         4c 8b 0d 97 98 51 01    mov    0x1519897(%rip),%r9	# ffffffff82620840 <log_first_seq>
         eb 7e                   jmp    ffffffff81107029	<log_make_free_space+0xe9>
  [...]
         85 ff                   test   %edi,%edi                  # edi = 1 for NMI_LOG
         4c 89 e8                mov    %r13,%rax
         4c 89 ca                mov    %r9,%rdx
         74 0a                   je     ffffffff8110703d	<log_make_free_space+0xfd>
         8b 15 27 98 51 01       mov    0x1519827(%rip),%edx       # ffffffff82620860 <nmi_log_first_id>
         48 8b 45 d0             mov    -0x30(%rbp),%rax
         48 39 c2                cmp    %rax,%rdx                  # end of loop
         0f 84 da 00 00 00       je     ffffffff81107120 <log_make_free_space+0x1e0>
  [...]
         85 ff                   test   %edi,%edi                  # edi = 1 for NMI_LOG
         4c 89 0d 17 97 51 01    mov    %r9,0x1519717(%rip)        # ffffffff82620840 <log_first_seq>
                                 ^^^^^^^^^^^^^^^^^^^^^^^^^^
                                 KABOOOM
         74 35                   je     ffffffff81107160		 <log_make_free_space+0x220>

  It stores log_first_seq when edi == NMI_LOG. This instructions are used also
  when edi == MAIN_LOG but the store is done speculatively before the condition
  is decided.  It is unsafe because we do not have "logbuf_lock" in NMI context
  and some other process migh modify "log_first_seq" in parallel"

I believe that the best course of action is both

 - building kernel (and anything multi-threaded, I guess) with that
   optimization turned off
 - persuade gcc folks to change the default for future releases

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Martin Jambor <mjambor@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marek Polacek <polacek@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Steven Noonan <steven@uplinklabs.net>
Cc: Richard Biener <richard.guenther@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:23 -07:00
Kees Cook 1332429b30 ./Makefile: explain stack-protector-strong CONFIG logic
This adds a hopefully helpful comment above the (seemingly weird) compiler
flag selection logic.

Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:12 -07:00
Behan Webster 26ea6bb1fe kbuild, LLVMLinux: Supress warnings unless W=1-3
clang has more warnings enabled by default. Turn them off unless W is
set. This patch fixes a logic bug where warnings in clang were disabled
when W was set.

Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
Cc: bp@alien8.de
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-08-05 15:40:01 +02:00
Linus Torvalds 19583ca584 Linux 3.16 2014-08-03 15:25:02 -07:00
Andi Kleen bfaf2dd350 Kbuild: Add a option to enable dwarf4 v2
I found that a lot of unresolvable variables when using gdb on the
kernel become resolvable when dwarf4 is enabled. So add a Kconfig flag
to enable it.

It definitely increases the debug information size, but on the other
hand this isn't so bad when debug fusion is used.

v2: Use cc-option
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-07-30 22:56:04 +02:00
Andi Kleen 866ced950b kbuild: Support split debug info v4
This is an alternative approach to lower the overhead of debug info
(as we discussed a few days ago)

gcc 4.7+ and newer binutils have a new "split debug info" debug info
model where the debug info is only written once into central ".dwo" files.

This avoids having to copy it around multiple times, from the object
files to the final executable. It lowers the disk space
requirements. In addition it defaults to compressed debug data.

More details here: http://gcc.gnu.org/wiki/DebugFission

This patch adds a new option to enable it. It has to be an option,
because it'll undoubtedly break everyone's debuginfo packaging scheme.
gdb/objdump/etc. all still work, if you have new enough versions.

I don't see big compile wins (maybe a second or two faster or so), but the
object dirs with debuginfo get significantly smaller. My standard kernel
config (slightly bigger than defconfig) shrinks from 2.9G disk space
to 1.1G objdir (with non reduced debuginfo). I presume if you are IO limited
the compile time difference will be larger.

Only problem I've seen so far is that it doesn't play well with older
versions of ccache (apparently fixed, see
https://bugzilla.samba.org/show_bug.cgi?id=10005)

v2: various fixes from Dirk Gouders. Improve commit message slightly.
v3: Fix clean rules and improve Kconfig slightly
v4: Fix merge error in last version (Sam Ravnborg)
    Clarify description that it mainly helps disk size.
Cc: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-07-30 22:54:52 +02:00
Linus Torvalds 64aa90f26c Linux 3.16-rc7 2014-07-27 12:41:55 -07:00
Linus Torvalds 2062afb4f8 Fix gcc-4.9.0 miscompilation of load_balance() in scheduler
Michel Dänzer and a couple of other people reported inexplicable random
oopses in the scheduler, and the cause turns out to be gcc mis-compiling
the load_balance() function when debugging is enabled.  The gcc bug
apparently goes back to gcc-4.5, but slight optimization changes means
that it now showed up as a problem in 4.9.0 and 4.9.1.

The instruction scheduling problem causes gcc to schedule a spill
operation to before the stack frame has been created, which in turn can
corrupt the spilled value if an interrupt comes in.  There may be other
effects of this bug too, but that's the code generation problem seen in
Michel's case.

This is fixed in current gcc HEAD, but the workaround as suggested by
Markus Trippelsdorf is pretty simple: use -fno-var-tracking-assignments
when compiling the kernel, which disables the gcc code that causes the
problem.  This can result in slightly worse debug information for
variable accesses, but that is infinitely preferable to actual code
generation problems.

Doing this unconditionally (not just for CONFIG_DEBUG_INFO) also allows
non-debug builds to verify that the debug build would be identical: we
can do

    export GCC_COMPARE_DEBUG=1

to make gcc internally verify that the result of the build is
independent of the "-g" flag (it will make the compiler build everything
twice, toggling the debug flag, and compare the results).

Without the "-fno-var-tracking-assignments" option, the build would fail
(even with 4.8.3 that didn't show the actual stack frame bug) with a gcc
compare failure.

See also gcc bugzilla:

  https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801

Reported-by: Michel Dänzer <michel@daenzer.net>
Suggested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-26 14:52:01 -07:00
Linus Torvalds 9a3c4145af Linux 3.16-rc6 2014-07-20 21:04:16 -07:00
Masahiro Yamada 011bf12547 kbuild: allow to override Python command name
The specification of Python 3 is largely different from that of
Python 2.

For example, arch/ia64/scripts/unwcheck.py seems to be written
in Python 2, not compatible with Python 3.

It is not a good idea to invoke python scripts with the hard-coded
command name 'python'. The command 'python' could possibly be
Python 3 on some systems.
For that case, it is reasonable to allow to override the command name
by giving 'PYTHON=python2' from the command line.

The 'python' in arch/ia64/Makefile should be replaced with '$(PYTHON)'.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-07-18 10:17:58 +02:00
Linus Torvalds 1795cd9b3a Linux 3.16-rc5 2014-07-13 14:04:33 -07:00
Michal Marek 3f1d9a6cec kbuild: make -s should be used with kernelrelease/kernelversion/image_name
If .config has been edited, there will be a silentoldconfig run:

  $ make defconfig
  ...
  $ make kernelrelease
  scripts/kconfig/conf --silentoldconfig Kconfig
  3.16.0-rc1+

Recently, kbuild started to print the name of the build directory when
using O=

  $ make O=build kernelrelease
  make[1]: Entering directory `/dev/shm/mmarek/linux-2.6/build'
  3.16.0-rc1+

Since these targets are often used in scripts, add a hint to use make -s
to the help text.

Suggested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-07-11 16:11:45 +02:00
Linus Torvalds fe5aa8a65b Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fixes from Michal Marek:
 "Three more fixes for the relative build dir feature:

   - Shut up make -s again
   - Fix for rpm/deb/tar-pkg with O=<subdir>
   - Fix for CONFIG_EXTRA_FIRMWARE"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  firmware: Create directories for external firmware
  kbuild: Fix packaging targets with relative $(srctree)
  kbuild: Do not print the build directory with make -s
2014-07-10 18:40:47 -07:00
Linus Torvalds cd3de83f14 Linux 3.16-rc4 2014-07-06 12:37:51 -07:00
Michal Marek c79624c1a6 kbuild: Fix packaging targets with relative $(srctree)
All other users of Makefile.build set $(obj) to the name of the
subdirectory to build. Do the same for the packaging targets, otherwise
the build fails if $(srctree) is a relative directory:

    $ make O=build tar-pkg
    make[1]: Entering directory `/home/mmarek/linux-2.6/build'
      CHK     include/config/kernel.release
    ../scripts/Makefile.build:44: ../../scripts/package/Makefile: No such file or directory
    make[2]: *** No rule to make target `../../scripts/package/Makefile'.  Stop.

Fixes: 9da0763b ("kbuild: Use relative path when building in a subdir of the source tree")
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-07-04 22:58:55 +02:00
Michal Marek 066b7ed955 kbuild: Do not print the build directory with make -s
Commit c2e28dc9 (kbuild: Print the name of the build directory) prints
the name of the build directory for O= builds, but we should not be
doing this in make -s mode, so that commands like

  make -s O=<dir> kernelrelease

can be used by scripts. This matches the behavior of make itself, where
the -s option implies --no-print-directory.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-07-04 14:33:33 +02:00
Linus Torvalds af6f157a4b Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fix from Michal Marek:
 "There is one more fix for the relative paths series from -rc1: Print
  the path to the build directory at the start of the build, so that
  editors and IDEs can match the relative paths to source files"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Print the name of the build directory
2014-07-03 18:34:00 -07:00
Michal Marek c2e28dc975 kbuild: Print the name of the build directory
With commit 9da0763b (kbuild: Use relative path when building in a
subdir of the source tree), the compiler messages include relative
paths. These are however relative to the build directory, not the
directory where make was started. Print the "Entering directory ..."
message once, so that IDEs/editors can find the source files.

Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-07-03 15:25:11 +02:00
Linus Torvalds 4c834452aa Linux 3.16-rc3 2014-06-29 14:11:36 -07:00
Linus Torvalds a497c3ba1d Linux 3.16-rc2 2014-06-21 19:02:54 -10:00
Linus Torvalds 7171511eae Linux 3.16-rc1 2014-06-15 17:45:28 -10:00
Linus Torvalds 1700ff823b Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:
 "Kbuild changes for v3.16-rc1:

   - cross-compilation fix so that cc-option is testing the right
     compiler
   - Fix for make defconfig all
   - Using relative paths to the object and source directory where
     possible, plus fixes for the fallout of the change
   - several cleanups in the Makefiles and scripts

  The powerpc fix is from today, because it was only discovered
  recently.  The rest has been in linux-next for some time"

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  powerpc: Avoid circular dependency with zImage.%
  kbuild: create include/config directory in scripts/kconfig/Makefile
  kbuild: do not create include/linux directory
  Makefile: Fix unrecognized cross-compiler command line options
  kbuild: do not add "selinux" to subdir- twice
  um: Fix for relative objtree when generating x86 headers
  kbuild: Use relative path when building in a subdir of the source tree
  kbuild: Use relative path when building in the source tree
  kbuild: Use relative path for $(objtree)
  firmware: Use $(quote) in the Makefile
  firmware: Simplify directory creation
  kbuild: trivial - fix comment block indent
  kbuild: trivial - remove trailing spaces
  kbuild: support simultaneous "make %config" and "make all"
  kbuild: move extra gcc checks to scripts/Makefile.extrawarn
2014-06-12 21:23:38 -07:00
Masahiro Yamada 9815594a78 kbuild: create include/config directory in scripts/kconfig/Makefile
The directory include/config is used only for
silentoldconfig, localmodconfig, localyesconfig.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-06-10 00:20:20 +02:00
Masahiro Yamada 356db564fb kbuild: do not create include/linux directory
There are no generated files under include/linux directory.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-06-10 00:20:12 +02:00
Geert Uytterhoeven a1c48bb160 Makefile: Fix unrecognized cross-compiler command line options
On architectures that setup CROSS_COMPILE in their arch/*/Makefile
(arc, blackfin, m68k, mips, parisc, score, sh, tile, unicore32, xtensa),
cc-option and cc-disable-warning may check against the wrong compiler,
causing errors like

    cc1: error: unrecognized command line option "-Wno-maybe-uninitialized"

if the host gcc supports a compiler option, while the cross compiler
doesn't support that option.

Move all logic using cc-option or cc-disable-warning below the inclusion
of the arch's Makefile to fix this.

Introduced by
  - commit e74fc973b6 ("Turn off
    -Wmaybe-uninitialized when building with -Os"),
  - commit 61163efae0 ("kbuild: LLVMLinux:
    Add Kbuild support for building kernel with Clang").

As -Wno-maybe-uninitialized requires a quite recent gcc (gcc 4.6.3 on
Ubuntu 12.04 LTS doesn't support it), this only showed up recently (gcc
4.8.2 on Ubuntu 14.04 LTS does support it).

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-06-09 23:28:07 +02:00
Linus Torvalds b20dcab9d4 LLVMLinux patches for v3.16
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlOTY+wACgkQuseO5dulBZXrIgCdFZyXRojufLLKikWEvHjZ3/k5
 KsQAnimtcge+62/IX7YwDjWS+xg9Wt3m
 =yPrI
 -----END PGP SIGNATURE-----

Merge tag 'llvmlinux-for-v3.16' of git://git.linuxfoundation.org/llvmlinux/kernel

Pull LLVM patches from Behan Webster:
 "Next set of patches to support compiling the kernel with clang.
  They've been soaking in linux-next since the last merge window.

  More still in the works for the next merge window..."

* tag 'llvmlinux-for-v3.16' of git://git.linuxfoundation.org/llvmlinux/kernel:
  arm, unwind, LLVMLinux: Enable clang to be used for unwinding the stack
  ARM: LLVMLinux: Change "extern inline" to "static inline" in glue-cache.h
  all: LLVMLinux: Change DWARF flag to support gcc and clang
  net: netfilter: LLVMLinux: vlais-netfilter
  crypto: LLVMLinux: aligned-attribute.patch
2014-06-08 12:27:44 -07:00
Linus Torvalds 1860e37987 Linux 3.15 2014-06-08 11:19:54 -07:00
Behan Webster 2288328ce9 all: LLVMLinux: Change DWARF flag to support gcc and clang
Both gcc (well, actually gnu as) and clang support the "-Wa,-gdwarf-2" option
(though clang does not support "-Wa,--gdwarf-2"). Since these flags are equivalent
in meaning, this patch uses the one which is better supported across compilers.

Signed-off-by: Behan Webster <behanw@converseincode.com>
2014-06-07 11:44:39 -07:00
Linus Torvalds fad01e866a Linux 3.15-rc8 2014-06-01 19:12:24 -07:00
Linus Torvalds c7208164e6 Linux 3.15-rc7 2014-05-25 16:06:00 -07:00
Linus Torvalds 4b660a7f5c Linux 3.15-rc6 2014-05-22 06:42:02 +09:00
Michal Marek 9da0763bdd kbuild: Use relative path when building in a subdir of the source tree
When doing make O=<subdir>, use '..' to refer to the source tree. This
allows for more readable compiler messages, and, more importantly, it
sets the VPATH to '..', so filenames in WARN_ON() etc. will be shorter.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-05-14 22:43:05 +02:00
Michal Marek 890676c65d kbuild: Use relative path when building in the source tree
When not using O=, $(srctree) refers to the same directory as
$(objtree), so we can set it to '.' as well. This makes the default
include path more compact and results in more readable messages from the
compiler. The only case where we need the absolute path is when creating
the 'source' symlink in /lib/modules.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-05-14 22:43:05 +02:00
Michal Marek 7e1c04779e kbuild: Use relative path for $(objtree)
The main Makefile sets its working directory to the object tree and
never changes it again. Therefore, we can use '.' instead of the
absolute path. The only case where we need the absolute path is when
creating the 'build' symlink in /lib/modules.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-05-14 22:43:04 +02:00
Linus Torvalds d6d211db37 Linux 3.15-rc5 2014-05-09 13:10:52 -07:00
Linus Torvalds 89ca3b8819 Linux 3.15-rc4 2014-05-04 18:14:42 -07:00
Masahiro Yamada 3fbb43df98 kbuild: trivial - fix comment block indent
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-04-30 17:34:35 +02:00
Masahiro Yamada 38385f8f01 kbuild: trivial - remove trailing spaces
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-04-30 17:34:32 +02:00
Masahiro Yamada 9319f4539c kbuild: support simultaneous "make %config" and "make all"
Kbuild is supposed to support mixed targets. (%config and build targets)

But "make all" did nothing if it was run with configuration targets.
For example,

  $ LANG=C make defconfig all
    HOSTCC  scripts/basic/fixdep
    HOSTCC  scripts/kconfig/conf.o
    SHIPPED scripts/kconfig/zconf.tab.c
    SHIPPED scripts/kconfig/zconf.lex.c
    SHIPPED scripts/kconfig/zconf.hash.c
    HOSTCC  scripts/kconfig/zconf.tab.o
    HOSTLD  scripts/kconfig/conf
  *** Default configuration is based on 'x86_64_defconfig'
  #
  # configuration written to .config
  #
  make: Nothing to be done for `all'.

This commits allows "make %config all" and makes sure
mixed targets are built one by one in the given order.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Michal Marek <mmarek@suse.cz>
CC: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-04-30 16:45:16 +02:00
Linus Torvalds d1db0eea85 Linux 3.15-rc3 2014-04-27 19:29:27 -07:00
Linus Torvalds a798c10faf Linux 3.15-rc2 2014-04-20 11:08:50 -07:00
Masahiro Yamada a86fe35373 kbuild: move extra gcc checks to scripts/Makefile.extrawarn
W=... provides extra gcc checks.

Having such code in scripts/Makefile.build results in the same flags
being added to KBUILD_CFLAGS multiple times becuase
scripts/Makefile.build is invoked every time Kbuild descends into
the subdirectories.

Since the top Makefile is already too cluttered, this commit moves
all of extra gcc check stuff to a new file scripts/Makefile.extrawarn,
which is included from the top Makefile.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
CC: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-04-16 23:28:41 +02:00
Linus Torvalds c9eaa447e7 Linux 3.15-rc1 2014-04-13 14:18:35 -07:00
Linus Torvalds 321d03c867 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild changes from Michal Marek:
 "Here is the non-critical part of kbuild:
   - One bogus coccinelle check removed, one check fixed not to suggest
     the obsolete PTR_RET macro
   - scripts/tags.sh does not index the generated *.mod.c files
   - new objdiff tool to list differences between two versions of an
     object file
   - A fix for scripts/bootgraph.pl"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts/coccinelle: Use PTR_ERR_OR_ZERO
  scripts/bootgraph.pl: Add graphic header
  scripts: objdiff: detect object code changes between two commits
  Coccicheck: Remove memcpy to struct assignment test
  scripts/tags.sh: Ignore *.mod.c
2014-04-12 18:22:27 -07:00
Behan Webster 61163efae0 kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang
Add support to toplevel Makefile for compiling with clang, both for
HOSTCC and CC. Use cc-option to prevent gcc option from breaking clang, and
from clang options from breaking gcc.

Clang 3.4 semantics are the same as gcc semantics for unsupported flags. For
unsupported warnings clang 3.4 returns true but shows a warning and gcc shows
a warning and returns false.

Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
2014-04-09 13:44:34 -07:00
Jason Cooper 79192ca8eb scripts: objdiff: detect object code changes between two commits
objdiff is useful when doing large code cleanups.  For example, when
removing checkpatch warnings and errors from new drivers in the staging
tree.

objdiff can be used in conjunction with a git rebase to confirm that
each commit made no changes to the resulting object code.  It has the
same return values as diff(1).

This was written specifically to support adding the skein and threefish
cryto drivers to the staging tree.  I needed a programmatic way to
confirm that commits changing >90% of the lines didn't inadvertently
change the code.

Temporary files (objdump output) are stored in

  /path/to/linux/.tmp_objdiff

'make mrproper' will remove this directory.

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-04-08 16:41:44 +02:00
Linus Torvalds b003d7706a Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild changes from Michal Marek:
 - cleanups in the main Makefiles and Documentation/DocBook/Makefile
 - make O=...  directory is automatically created if needed
 - mrproper/distclean removes the old include/linux/version.h to make
   life easier when bisecting across the commit that moved the version.h
   file

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: docbook: fix the include error when executing "make help"
  kbuild: create a build directory automatically for out-of-tree build
  kbuild: remove redundant '.*.cmd' pattern from make distclean
  kbuild: move "quote" to Kbuild.include to be consistent
  kbuild: docbook: use $(obj) and $(src) rather than specific path
  kbuild: unconditionally clobber include/linux/version.h on distclean
  kbuild: docbook: specify KERNELDOC dependency correctly
  kbuild: docbook: include cmd files more simply
  kbuild: specify build_docproc as a phony target
2014-04-07 17:52:31 -07:00
Linus Torvalds b9f2b21a32 Devicetree changes for v3.15
Updates to devicetree core code. This branch contains the following notable changes:
 * Add reserved memory binding
 * Make struct device_node a kobject and remove legacy /proc/device-tree
 * ePAPR conformance fixes
 * Update in-kernel DTC copy to version v1.4.0
 * Preparation changes for dynamic device tree overlays
 * minor bug fixes and documentation changes
 
 The most significant change in this branch is the conversion of struct
 device_node to be a kobject that is exposed via sysfs and removal of the
 old /proc/device-tree code. This simplifies the device tree handling
 code and tightens up the lifecycle on device tree nodes.
 
 [updated: added fix for dangling select PROC_DEVICETREE]
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTOyNwAAoJEMWQL496c2LNZY0QAIreUrpo3/hKRau61EDPXkOA
 UFRyPUHD0k/dNXWWDbTfvKH/nAfzdVwejhePqEWiODiFOFkq7JyQlMKPA+CZuZj0
 ygN4215A1yj/hDf6JRD5Zn4WGpawDt9InlbZSps6P5dd8voV5t5dz6uzz+Y7uqaK
 CAjTDlBSmxEen5vRHiHQgKv74au/+b9yfSURjPQVWg46+wl3WJwjsdzerphm4unW
 tpEr8zkIsm51mqqAx4penIuiovh7+L2J5v4BFeg8o+kaZEuZpVxLHJPOuBd5hdom
 zeqEIj3AqHTh5suYIHe4aAbZ2wMP3kYGgkPGwfWLnwLyULxalcCtGZeaCi9nwTFj
 Fdj+7f17ocrt5mif0f5Deufi1LqJsDjhY6G9p7HuV7Y9hsMILpJIUoGENPji+TWj
 BA4L45eaPmNYdKJytEtFD7F2WnXeHZ6fDtYho/39DWW+Bt16IFX85T199irhxGG4
 byN6LRaahk2UeycSXkQHAlWOQHqzBcJJAkQLN2iahzyYRr9Dy+VI2E9clm53m49O
 YQYcONdUlMYrtfRwJpbB9XHM0HgZUvg0LT5z/iHQs9uJtoo33Oj+zxFixyZLQ9Dq
 qyLqQWEpV9gFLAo9tpf56gffkLiJRsHkX4UJ6oTtj4DY1WWU9H81jjCvv/7flzp/
 8ZyyZzANQf1DZ9kqO2v+
 =lyA5
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux

Pull devicetree changes from Grant Likely:
 "Updates to devicetree core code.  This branch contains the following
  notable changes:

   - add reserved memory binding
   - make struct device_node a kobject and remove legacy
     /proc/device-tree
   - ePAPR conformance fixes
   - update in-kernel DTC copy to version v1.4.0
   - preparatory changes for dynamic device tree overlays
   - minor bug fixes and documentation changes

  The most significant change in this branch is the conversion of struct
  device_node to be a kobject that is exposed via sysfs and removal of
  the old /proc/device-tree code.  This simplifies the device tree
  handling code and tightens up the lifecycle on device tree nodes.

  [updated: added fix for dangling select PROC_DEVICETREE]"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits)
  dt: Remove dangling "select PROC_DEVICETREE"
  of: Add support for ePAPR "stdout-path" property
  of: device_node kobject lifecycle fixes
  of: only scan for reserved mem when fdt present
  powerpc: add support for reserved memory defined by device tree
  arm64: add support for reserved memory defined by device tree
  of: add missing major vendors
  of: add vendor prefix for SMSC
  of: remove /proc/device-tree
  of/selftest: Add self tests for manipulation of properties
  of: Make device nodes kobjects so they show up in sysfs
  arm: add support for reserved memory defined by device tree
  drivers: of: add support for custom reserved memory drivers
  drivers: of: add initialization code for dynamic reserved memory
  drivers: of: add initialization code for static reserved memory
  of: document bindings for reserved-memory nodes
  Revert "of: fix of_update_property()"
  kbuild: dtbs_install: new make target
  ARM: mvebu: Allows to get the SoC ID even without PCI enabled
  of: Allows to use the PCI translator without the PCI core
  ...
2014-04-02 14:27:15 -07:00
Masahiro Yamada 1c9e70a55b kbuild: create a build directory automatically for out-of-tree build
Kbuild supports saving output files in a separate directory.
But the build directory must be created beforehand. For example,

  $ mkdir -p dir/to/store/output/files
  $ make O=dir/to/store/output/files defconfig

Creating a build directory automatically would be useful.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-03-31 22:47:16 +02:00
Masahiro Yamada a03fcb50e8 kbuild: remove redundant '.*.cmd' pattern from make distclean
'.*.cmd' files are cleaned-up by "make clean".
The same pattern in "make distclean" is unnecessary.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-03-31 22:36:11 +02:00
Grant Likely d88cf7d7b4 Merge remote-tracking branch 'robh/for-next' into devicetree/next 2014-03-31 08:10:55 +01:00
Linus Torvalds 455c6fdbd2 Linux 3.14 2014-03-30 20:40:15 -07:00
Paul Gortmaker 9c8cdb7164 kbuild: unconditionally clobber include/linux/version.h on distclean
As of v3.7, the UAPI changes relocated headers around such that the
kernel version header lived in a new place.

If a person is bisecting and if you go back to pre-UAPI days,
you will create an include/linux/version.h  -- then if you checkout a
post-UAPI kernel, and even run "make distclean" it still won't delete
that old version file.  So you get a situation like this:

$ grep -R LINUX_VERSION_CODE include/
include/generated/uapi/linux/version.h:#define LINUX_VERSION_CODE 200192
include/linux/version.h:#define LINUX_VERSION_CODE 132646

The value in that second line is representative of a v2.6.38 version.
And it will be sourced/used, hence leading to strange behaviours, such
as drivers/staging content (which typically hasn't been purged of version
ifdefs) failing to build.

Since it is a subtle mode of failure, lets always clobber the old
file when doing a distclean.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-03-29 20:58:18 +01:00
Linus Torvalds b098d6726b Linux 3.14-rc8 2014-03-24 19:31:17 -07:00
Linus Torvalds dcb99fd9b0 Linux 3.14-rc7 2014-03-16 18:51:24 -07:00
Linus Torvalds fa389e2202 Linux 3.14-rc6 2014-03-09 19:41:57 -07:00
Grant Likely dab2310d9d Linux 3.14-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTE+9XAAoJEHm+PkMAQRiGrMQIAKI2V49Kj8WlnwGchFvsbGJB
 SLALwNi33T/IBKdZRhrfryBu02Zj7eVvZ2ML35dJEnmF88O+dJBDMTkKV1xalrip
 mtkBrjUnfAI04fq/daLQ1TsAy4qqlra5tSTuDCw8ILOnGPwT0VydIEHNdtmoUIfw
 xlZLxHzny1MslZ78d7uR/cUnV9ylKRRajWzfw1HT8hL51fCt8nRWY0sCvwvl+kMJ
 LsK+6I7mHDUuzA7QBmBI+dhzQgos5+JkkrnpmqHAqwmIh+AI3ksmjUCQ4dM7owrO
 IvEx+ZNDqxAdLcm1WAxATNfxddFXHc62JTvKuuKqTVWuaxVfK1Aqt8MjDMIPeAQ=
 =yV5u
 -----END PGP SIGNATURE-----

Merge tag 'v3.14-rc5' into HEAD

Linux 3.14-rc5
2014-03-04 16:44:10 +08:00
Linus Torvalds 0414855fdc Linux 3.14-rc5 2014-03-02 18:56:16 -08:00
Jan Beulich 6c15b327cc Makefile: fix build with make 3.80 again
According to Documentation/Changes, make 3.80 is still being supported
for building the kernel, hence make files must not make (unconditional)
use of features introduced only in newer versions.  Commit 8779657d29
("stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG") however
introduced an "else ifdef" construct which make 3.80 doesn't understand.

Also correct a warning message still referencing the old config option
name.

Apart from that I question the use of "ifdef" here (but it was used that
way already prior to said commit): ifeq (,y) would seem more to the
point.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-25 15:25:47 -08:00
Fathi Boudra 27b2a49a14 Makefile: fix extra parenthesis typo when CC_STACKPROTECTOR_REGULAR is enabled
An extra parenthesis typo introduced in 19952a9203 ("stackprotector:
Unify the HAVE_CC_STACKPROTECTOR logic between architectures") is
causing the following error when CONFIG_CC_STACKPROTECTOR_REGULAR is
enabled:

  Makefile:608: Cannot use CONFIG_CC_STACKPROTECTOR: -fstack-protector not supported by compiler
  Makefile:608: *** missing separator.  Stop.

Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-25 15:25:45 -08:00
Linus Torvalds cfbf8d4857 Linux 3.14-rc4 2014-02-23 17:40:03 -08:00
Jason Cooper f4d4ffc03e kbuild: dtbs_install: new make target
Unlike other build products in the Linux kernel, there is no 'make
*install' mechanism to put devicetree blobs in a standard place.

This commit adds a new 'dtbs_install' make target which copies all of
the dtbs into the INSTALL_DTBS_PATH directory. INSTALL_DTBS_PATH can be
set before calling make to change the default install directory. If not
set then it defaults to:

	$INSTALL_PATH/dtbs/$KERNELRELEASE.

This is done to keep dtbs from different kernel versions separate until
things have settled down.  Once the dtbs are stable, and not so strongly
linked to the kernel version, the devicetree files will most likely move
to their own repo.  Users will need to upgrade install scripts at that
time.

v7: (reworked by Grant Likely)
- Moved rules from arch/arm/Makefile to arch/arm/boot/dts/Makefile so
  that each dtb install could have a separate target and be reported as
  part of the make output.
- Fixed dependency problem to ensure $KERNELRELEASE is calculated before
  attempting to install
- Removed option to call external script. Copying the files should be
  sufficient and a build system can post-process the install directory.
  Despite the fact an external script is used for installing the kernel,
  I don't think that is a pattern that should be encouraged. I would
  rather see buildroot type tools post process the install directory to
  rename or move dtb files after installing to a staging directory.
  - Plus it is easy to add a hook after the fact without blocking the
    rest of this feature.
- Move the helper targets into scripts/Makefile.lib with the rest of the
  common dtb rules

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rob Herring <robh+dt@kernel.org>
2014-02-20 15:53:39 +00:00
Linus Torvalds 6d0abeca32 Linux 3.14-rc3 2014-02-16 13:30:25 -08:00
Linus Torvalds b28a960c42 Linux 3.14-rc2 2014-02-09 18:15:47 -08:00
Prarit Bhargava ae63b2d7bd scripts/tags.sh: Ignore *.mod.c
CONFIG_MODVERSIONS=y results in a .mod.c for every compiled file in the
kernel. Issuing a 'make cscope' on a compiled kernel tree results in
the cscope files containing *.mod.c files.

[prarit@prarit linux]# make cscope
[prarit@prarit linux]# cat cscope.files | grep mod.c | wc -l
4807

These files are not useful for cscope and should be ignored. For example,

   #   line  filename / context / line
   1    105  arch/x86/kvm/kvm-intel.mod.c <<GLOBAL>>
             { 0x618911fc, __VMLINUX_SYMBOL_STR(numa_node) },
   2    508  drivers/block/mtip32xx/mtip32xx.h <<GLOBAL>>
             int numa_node;
   3     55  drivers/block/mtip32xx/mtip32xx.mod.c <<GLOBAL>>
             { 0x618911fc, __VMLINUX_SYMBOL_STR(numa_node) },
   4     37  drivers/cpufreq/acpi-cpufreq.mod.c <<GLOBAL>>
             { 0x618911fc, __VMLINUX_SYMBOL_STR(numa_node) },
   <snip>

Add an export to RCS_FIND_IGNORE so it can be used in scripts/tags.sh
and add explicitly ignore *.mod.c files.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-02-06 16:52:07 +01:00
Linus Torvalds 38dbfb59d1 Linus 3.14-rc1 2014-02-02 16:42:13 -08:00
Linus Torvalds 03c7287dd2 Merge branch 'drop-time' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull __TIME__/__DATE__ removal from Michal Marek:
 "This series by Josh finishes the removal of __DATE__ and __TIME__ from
  the kernel.  The last patch adds -Werror=date-time to KBUILD_CFLAGS to
  stop these from reappearing.

  Part of the series went through Greg's trees during this merge window,
  which is why this pull request is not based on v3.13-rc1"

* 'drop-time' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Makefile: Build with -Werror=date-time if the compiler supports it
  x86: math-emu: Drop already-disabled print of build date
  net: wireless: brcm80211: Drop debug version with build date/time
  mtd: denali: Drop print of build date/time
2014-01-30 17:00:35 -08:00
Linus Torvalds 597690cd02 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild changes from Michal Marek:
 - fix make -s detection with make-4.0
 - fix for scripts/setlocalversion when the kernel repository is a
   submodule
 - do not hardcode ';' in macros that expand to assembler code, as some
   architectures' assemblers use a different character for newline
 - Fix passing --gdwarf-2 to the assembler

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  frv: Remove redundant debugging info flag
  mn10300: Remove redundant debugging info flag
  kbuild: Fix debugging info generation for .S files
  arch: use ASM_NL instead of ';' for assembler new line character in the macro
  kbuild: Fix silent builds with make-4
  Fix detectition of kernel git repository in setlocalversion script [take #2]
2014-01-30 16:58:05 -08:00
Josh Triplett fe7c36c7bd Makefile: Build with -Werror=date-time if the compiler supports it
GCC 4.9 and newer have a new warning -Wdate-time, which warns on any use
of __DATE__, __TIME__, or __TIMESTAMP__, which would make the build
non-deterministic.  Now that the kernel does not use any of those
macros, turn on -Werror=date-time if available, to keep it that way.

The kernel already (optionally) records this information at build time
in a single place; other kernel code should not duplicate that.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-01-27 23:14:13 +01:00
Geoff Levand 7db436325d kbuild: Fix debugging info generation for .S files
Change the debuging info generation flag in KBUILD_AFLAGS from '-gdwarf-2' to
'-Wa,--gdwarf-2'.  This will properly generate the debugging info for .S files
when CONFIG_DEBUG_INFO=y.

It seems current gcc does not pass a '--gdwarf-2' option on to the assembler
when '-gdwarf-2' is on its command line (note the differece in the gcc and as
flags).  This change provides the correct assembler flag to gcc, and so does
not rely on gcc to emit a flag for the assembler.

Signed-off-by: Geoff Levand <geoff@infradead.org> for Huawei, Linaro
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-01-27 22:03:08 +01:00
Linus Torvalds ad3ab302fd Merge branch 'core-stackprotector-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull strong stackprotector support from Ingo Molnar:
 "This tree adds a CONFIG_CC_STACKPROTECTOR_STRONG=y, a new, stronger
  stack canary checking method supported by the newest GCC versions (4.9
  and later).

  Here's the 'intensity comparison' between the various protection
  modes:

      - defconfig
        11430641 kernel text size
        36110 function bodies

      - defconfig + CONFIG_CC_STACKPROTECTOR_REGULAR
        11468490 kernel text size (+0.33%)
        1015 of 36110 functions are stack-protected (2.81%)

      - defconfig + CONFIG_CC_STACKPROTECTOR_STRONG via this patch
        11692790 kernel text size (+2.24%)
        7401 of 36110 functions are stack-protected (20.5%)

  the strong model comes with non-trivial costs, which is why we
  preserved the 'regular' and 'none' models as well"

* 'core-stackprotector-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG
  stackprotector: Unify the HAVE_CC_STACKPROTECTOR logic between architectures
2014-01-20 10:26:31 -08:00
Linus Torvalds d8ec26d7f8 Linux 3.13 2014-01-19 18:40:07 -08:00
Linus Torvalds 7e22e91102 Linux 3.13-rc8 2014-01-12 17:04:18 +07:00
Emil Medve e36aaea289 kbuild: Fix silent builds with make-4
make-4 changed the way/order it presents the command line options
into MAKEFLAGS

In make-3.8x, '-s' would always be first into a group of options
with the '-'/hyphen removed

$ make -p -s 2>/dev/null | grep ^MAKEFLAGS
MAKEFLAGS = sp

In make-4, '-s' seems to always be last into a group of options
with the '-'/hyphen removed

$ make -s -p 2>/dev/null | grep ^MAKEFLAGS
MAKEFLAGS = ps

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-01-06 13:27:49 +01:00
Linus Torvalds d6e0a2dd12 Linux 3.13-rc7 2014-01-04 15:12:14 -08:00
Linus Torvalds 802eee95bd Linux 3.13-rc6 2013-12-29 16:01:33 -08:00
Linus Torvalds 413541dd66 Linux 3.13-rc5 2013-12-22 13:08:32 -08:00
Linus Torvalds b7000adef1 Don't set the INITRD_COMPRESS environment variable automatically
Commit 1bf49dd4be ("./Makefile: export initial ramdisk compression
config option") started setting the INITRD_COMPRESS environment variable
depending on which decompression models the kernel had available.

That is completely broken.

For example, we by default have CONFIG_RD_LZ4 enabled, and are able to
decompress such an initrd, but the user tools to *create* such an initrd
may not be availble.  So trying to tell dracut to generate an
lz4-compressed image just because we can decode such an image is
completely inappropriate.

Cc: J P <ppandit@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-20 16:52:45 -08:00
Kees Cook 8779657d29 stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG
This changes the stack protector config option into a choice of
"None", "Regular", and "Strong":

   CONFIG_CC_STACKPROTECTOR_NONE
   CONFIG_CC_STACKPROTECTOR_REGULAR
   CONFIG_CC_STACKPROTECTOR_STRONG

"Regular" means the old CONFIG_CC_STACKPROTECTOR=y option.

"Strong" is a new mode introduced by this patch. With "Strong" the
kernel is built with -fstack-protector-strong (available in
gcc 4.9 and later). This option increases the coverage of the stack
protector without the heavy performance hit of -fstack-protector-all.

For reference, the stack protector options available in gcc are:

-fstack-protector-all:
  Adds the stack-canary saving prefix and stack-canary checking
  suffix to _all_ function entry and exit. Results in substantial
  use of stack space for saving the canary for deep stack users
  (e.g. historically xfs), and measurable (though shockingly still
  low) performance hit due to all the saving/checking. Really not
  suitable for sane systems, and was entirely removed as an option
  from the kernel many years ago.

-fstack-protector:
  Adds the canary save/check to functions that define an 8
  (--param=ssp-buffer-size=N, N=8 by default) or more byte local
  char array. Traditionally, stack overflows happened with
  string-based manipulations, so this was a way to find those
  functions. Very few total functions actually get the canary; no
  measurable performance or size overhead.

-fstack-protector-strong
  Adds the canary for a wider set of functions, since it's not
  just those with strings that have ultimately been vulnerable to
  stack-busting. With this superset, more functions end up with a
  canary, but it still remains small compared to all functions
  with only a small change in performance. Based on the original
  design document, a function gets the canary when it contains any
  of:

    - local variable's address used as part of the right hand side
      of an assignment or function argument
    - local variable is an array (or union containing an array),
      regardless of array type or length
    - uses register local variables

  https://docs.google.com/a/google.com/document/d/1xXBH6rRZue4f296vGt9YQcuLVQHeE516stHwt8M9xyU

Find below a comparison of "size" and "objdump" output when built with
gcc-4.9 in three configurations:

  - defconfig
	11430641 kernel text size
	36110 function bodies

  - defconfig + CONFIG_CC_STACKPROTECTOR_REGULAR
	11468490 kernel text size (+0.33%)
	1015 of 36110 functions are stack-protected (2.81%)

  - defconfig + CONFIG_CC_STACKPROTECTOR_STRONG via this patch
	11692790 kernel text size (+2.24%)
	7401 of 36110 functions are stack-protected (20.5%)

With -strong, ARM's compressed boot code now triggers stack
protection, so a static guard was added. Since this is only used
during decompression and was never used before, the exposure
here is very small. Once it switches to the full kernel, the
stack guard is back to normal.

Chrome OS has been using -fstack-protector-strong for its kernel
builds for the last 8 months with no problems.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1387481759-14535-3-git-send-email-keescook@chromium.org
[ Improved the changelog and descriptions some more. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-20 09:38:40 +01:00
Kees Cook 19952a9203 stackprotector: Unify the HAVE_CC_STACKPROTECTOR logic between architectures
Instead of duplicating the CC_STACKPROTECTOR Kconfig and
Makefile logic in each architecture, switch to using
HAVE_CC_STACKPROTECTOR and keep everything in one place. This
retains the x86-specific bug verification scripts.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1387481759-14535-2-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-20 09:38:40 +01:00
Jan Beulich 7ac1815683 fix build with make 3.80
According to Documentation/Changes, make 3.80 is still being supported
for building the kernel, hence make files must not make (unconditional)
use of features introduced only in newer versions.

Commit 1bf49dd4be ("./Makefile: export initial ramdisk compression
config option") however introduced "else ifeq" constructs which make
3.80 doesn't understand.  Replace the logic there with more conventional
(in the kernel build infrastructure) list constructs (except that the
list here is intentionally limited to exactly one element).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: P J P <ppandit@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-18 19:04:52 -08:00
Linus Torvalds 319e2e3f63 Linux 3.13-rc4 2013-12-15 12:31:33 -08:00
Linus Torvalds 374b105797 Linux 3.13-rc3 2013-12-06 09:34:04 -08:00
Linus Torvalds dc1ccc4815 Linux 3.13-rc2 2013-11-29 12:57:14 -08:00
Linus Torvalds 6ce4eac1f6 Linux 3.13-rc1 2013-11-22 11:30:55 -08:00
Linus Torvalds 762fb1ddd5 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild changes from Michal Marek:
 - LTO fixes, but the kallsyms part had to be reverted
 - Pass -Werror=implicit-int and -Werror=strict-prototypes to the
   compiler by default
 - snprintf fix in modpost
 - remove GREP_OPTIONS from the environment to be immune against exotic
   grep option settings

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kallsyms: Revert back to 128 max symbol length
  Kbuild: Ignore GREP_OPTIONS env variable
  scripts: kallsyms: Use %zu to print 'size_t'
  scripts/bloat-o-meter: use .startswith rather than fragile slicing
  scripts/bloat-o-meter: ignore changes in the size of linux_banner
  kbuild: replace unbounded sprintf call in modpost
  kbuild, bloat-o-meter: fix static detection
  Kbuild: Handle longer symbols in kallsyms.c
  kbuild: Increase kallsyms max symbol length
  Makefile: enable -Werror=implicit-int and -Werror=strict-prototypes by default
2013-11-15 14:06:38 -08:00
P J P 1bf49dd4be ./Makefile: export initial ramdisk compression config option
Make menuconfig allows one to choose compression format of an initial
ramdisk image.  But this choice does not result in duly compressed ramdisk
image.  Because - $ make install - does not pass on the selected
compression choice to the dracut(8) tool, which creates the initramfs
file.  dracut(8) generates the image with the default compression, ie.
gzip(1).

This patch exports the selected compression option to a sub-shell
environment, so that it could be used by dracut(8) tool to generate
appropriately compressed initramfs images.

There isn't a straightforward way to pass on options to dracut(8) via
positional parameters.  Because it is indirectly invoked at the end of a $
make install sequence.

 # make install
   -> arch/$arch/boot/Makefile
    -> arch/$arch/boot/install.sh
     -> /sbing/installkernel ...
      -> /sbin/new-kernel-pkg ...
       -> /sbin/dracut ...

Signed-off-by: P J P <ppandit@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:36 +09:00
Borislav Petkov ab7474ea53 Kbuild: Ignore GREP_OPTIONS env variable
When building the kernel in a shell which defines GREP_OPTIONS so that
grep behavior is modified, we can break the generation of the syscalls
table like so:

__SYSCALL_COMMON(^[[01;31m^[[K0^[[m^[[K, sys_read, sys_read)
__SYSCALL_COMMON(^[[01;31m^[[K1^[[m^[[K, sys_write, sys_write)
__SYSCALL_COMMON(^[[01;31m^[[K1^[[m^[[K0, sys_mprotect, sys_mprotect) ...

This is just the initial breakage, later we barf when generating
modules.

In this case, GREP_OPTIONS contains "--color=always" which adds the shell
colors markup and completely fudges the headers under ...generated/asm/.

Fix that by unexporting the GREP_OPTIONS variable for the whole kernel
build as we tend to use grep at a bunch of places.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-11-11 17:56:43 +01:00
Linus Torvalds 5e01dc7b26 Linux 3.12 2013-11-03 15:41:51 -08:00
Linus Torvalds 959f58544b Linux 3.12-rc7 2013-10-27 16:12:03 -07:00
Sergei Trofimovich 8097047217 Makefile: enable -Werror=implicit-int and -Werror=strict-prototypes by default
The common error found in forward-ported/backported patches is missing
headers.  One recent example (files and function names are mangled):

    void foo(){}
    EXPORT_SYMBOL(foo);

gave only warning

    foo.c:12345678:5: warning: function declaration isn't a prototype [-Wstrict-prototypes]
    void foo(){}
         ^

    foo.c:12345679:5: warning: data definition has no type or storage class [enabled by default]
    EXPORT_SYMBOL(foo);
    foo.c:12345679:5: warning: type defaults to 'int' in declaration of 'EXORT_SYMBOL' [-Werror=implicit-int]

Now it's a fatal error. Tested on x86_64 allyesconfig.

[akpm@linux-foundation.org: fix typos in comments]
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-10-23 16:36:57 +02:00
Linus Torvalds 31d141e3a6 Linux 3.12-rc6 2013-10-19 12:28:15 -07:00
Linus Torvalds 61e6cfa80d Linux 3.12-rc5 2013-10-13 15:41:28 -07:00
Linus Torvalds d0e639c9e0 Linux 3.12-rc4 2013-10-06 14:00:20 -07:00
Linus Torvalds 15c03dd485 Linux 3.12-rc3 2013-09-29 15:02:38 -07:00
Linus Torvalds 4a10c2ac2f Linux 3.12-rc2 2013-09-23 15:41:09 -07:00
Linus Torvalds 272b98c645 Linux 3.12-rc1 2013-09-16 16:17:51 -04:00
Linus Torvalds d5d04bb48f Bye, bye, WfW flag
This reverts the Linux for Workgroups thing.  And no, before somebody
asks, we're not doing Linux95.  Not for a few years, at least.

Sure, the flag added some color to the logo, and could have remained as
a testament to my leet gimp skills.  But no.  And I'll do this early, to
avoid the chance of forgetting when I'm doing the actual rc1 release on
the road.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 19:55:12 -07:00
Linus Torvalds 1ff5e37e72 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild update from Michal Marek:
 "Only these two commits are in the kbuild branch this time:
   - Using filechk for include/config/kernel.release
   - Cleanup in scripts/sortextable.c"

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Do not overwrite include/config/kernel.release needlessly
  scripts: remove unused function in sortextable.c
2013-09-07 19:46:50 -07:00
Linus Torvalds 6e4664525b Linux 3.11 2013-09-02 13:46:10 -07:00
Michal Marek 0d0e7718a9 kbuild: Do not overwrite include/config/kernel.release needlessly
Use filechk to detect if the content changed or not.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-08-28 17:09:54 +02:00
Linus Torvalds d8dfad3876 Linux 3.11-rc7 2013-08-25 17:43:22 -07:00
Linus Torvalds b36f4be3de Linux 3.11-rc6 2013-08-18 14:36:53 -07:00
Linus Torvalds d4e4ab86bc Linux 3.11-rc5 2013-08-11 18:04:20 -07:00
Linus Torvalds c095ba7224 Linux 3.11-rc4 2013-08-04 13:46:46 -07:00
Linus Torvalds 5ae90d8e46 Linux 3.11-rc3 2013-07-28 20:53:33 -07:00
Linus Torvalds 3b2f64d00c Linux 3.11-rc2 2013-07-21 12:05:29 -07:00
Linus Torvalds ad81f0545e Linux 3.11-rc1 2013-07-14 15:18:27 -07:00
Linus Torvalds 6d128e1e72 Revert "Makefile: Fix install error with make -j option"
This reverts commit d2aae8477c.

It is completely and utterly broken.  Module install should not build
any files, and adding broken dependencies to "help" it build files is
complete and utter sh*t.

The kernel should not be built by root, and "make install" and "make
module_install" (that for obvious reasons need to be run as root)
absolutely must not build any files.  They should only ever copy the
already-built files over.

So having dependencies for the install targets is wrong, wrong, wrong.

If you try to install a kernel without building it first, you *should*
get errors. The build system shouldn't try to help root build the files.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-10 19:02:51 -07:00
Linus Torvalds cb63fc2662 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:
 - fix for make headers_install argv explosion with too long path
 - scripts/setlocalversion does not call git update-index needlessly
 - fix for the src.rpm produced by make rpm-pkg.  The new make
   image_name can be useful also for other packaging tools.
 - scripts/mod/devicetable-offsets.o is not rebuilt during each make run
 - make modules_install dependency fix
 - scripts/sortextable portability fix
 - fix for kbuild to generate the output directory for all object files
   in subdirs.
 - a couple of minor fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: create directory for dir/file.o
  tools/include: use stdint types for user-space byteshift headers
  Makefile: Fix install error with make -j option
  Fix a build warning in scripts/mod/file2alias.c
  improve modalias building
  scripts/mod: Spelling s/DEVICEVTABLE/DEVICETABLE/
  kbuild: fix error when building from src rpm
  scripts/setlocalversion on write-protected source tree
  Makefile.lib: align DTB quiet_cmd
  kbuild: fix make headers_install when path is too long
2013-07-10 16:05:40 -07:00
Linus Torvalds 80cc38b163 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "The usual stuff from trivial tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  treewide: relase -> release
  Documentation/cgroups/memory.txt: fix stat file documentation
  sysctl/net.txt: delete reference to obsolete 2.4.x kernel
  spinlock_api_smp.h: fix preprocessor comments
  treewide: Fix typo in printk
  doc: device tree: clarify stuff in usage-model.txt.
  open firmware: "/aliasas" -> "/aliases"
  md: bcache: Fixed a typo with the word 'arithmetic'
  irq/generic-chip: fix a few kernel-doc entries
  frv: Convert use of typedef ctl_table to struct ctl_table
  sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
  doc: clk: Fix incorrect wording
  Documentation/arm/IXP4xx fix a typo
  Documentation/networking/ieee802154 fix a typo
  Documentation/DocBook/media/v4l fix a typo
  Documentation/video4linux/si476x.txt fix a typo
  Documentation/virtual/kvm/api.txt fix a typo
  Documentation/early-userspace/README fix a typo
  Documentation/video4linux/soc-camera.txt fix a typo
  lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
  ...
2013-07-04 11:40:58 -07:00
Robert Richter d2aae8477c Makefile: Fix install error with make -j option
Make modules_install fails with -j option:

   DEPMOD
 Usage: .../.source/linux/scripts/depmod.sh /sbin/depmod <kernelrelease>
 make[1]: *** [_modinst_post] Error 1

Adding kernelrelease dependency to fix this.

Signed-off-by: Robert Richter <robert.richter@calxeda.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-03 14:58:13 +02:00
Linus Torvalds 8bb495e3f0 Linux 3.10 2013-06-30 15:13:29 -07:00
Geert Uytterhoeven 83a35e3604 treewide: relase -> release
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-06-28 14:34:33 +02:00
Mike Marciniszyn c398ff00f5 kbuild: fix error when building from src rpm
The following issue can be reproduced with Linus' tree on
an x86_64 server.

>+ cp /home/user/rpmbuild-test/BUILDROOT/kernel-3.9.2.x86_64/boot/vmlinuz-3.9.2
>cp: missing destination file operand after
>/home/user/rpmbuild-test/BUILDROOT/kernel-3.9.2-1.x86_64/boot/vmlinuz-3.9.2'
>Try `cp --help' for more information.
>error: Bad exit status from /var/tmp/rpm-tmp.R4o0iI (%install)

Here are the commands to reproduce:

make defconfig
make rpm-pkg

Use the resulting src rpm to build as follows:

mkdir ~/rpmbuild-test
cd ~/rpmbuild-test
rpmbuild --rebuild --define "_topdir `pwd`" -vv ~/rpmbuild/SRPMS/kernel-3.10.0_rc1+-1.src.rpm

The issue is because the %install script uses $KBUILD_IMAGE and it hasn't
been set since it is only available in the kbuild system and not in the
%install script.

This patch adds a Makefile target to emit the image_name that can be used
and modifies the mkspec to use the dynamic name in %install.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-24 15:26:14 +02:00
Linus Torvalds 9e895ace5d Linux 3.10-rc7 2013-06-22 09:47:31 -10:00
Linus Torvalds 7d13205581 Linux 3.10-rc6 2013-06-15 11:51:07 -10:00
Linus Torvalds 317ddd256b Linux 3.10-rc5 2013-06-08 17:41:04 -07:00
Linus Torvalds d683b96b07 Linux 3.10-rc4 2013-06-02 17:11:17 +09:00
Linus Torvalds e4aa937ec7 Linux 3.10-rc3 2013-05-26 16:00:47 -07:00
Linus Torvalds c7788792a5 Linux 3.10-rc2 2013-05-20 14:37:38 -07:00
Linus Torvalds f722406faa Linux 3.10-rc1 2013-05-11 17:14:08 -07:00
Linus Torvalds b9e306e07e Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:
 "Non-critical kbuild changes:

   - make coccicheck improvements, but no new semantic patches this time

   - make rpm improvements

   - make tar-pkg change to include the architecture in the filename.

     This is a deliberate incompatibility, but nobody has complained so
     far and it is useful if you build for different architectures.  It
     also matches what the deb-pkg and rpm-pkg targets produce.

   - kbuild documentation fix"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  rpm-pkg: Remove pointless set -e statements
  rpm-pkg: Always regenerate the specfile
  rpm-pkg: Do not write to the parent directory
  rpm-pkg: Do not package the whole source directory
  buildtar: Add ARCH to the archive name
  Coccinelle: Fix patch output when coccicheck is used with M= and C=
  Coccinelle: Add support to the SPFLAGS variable
  Coccinelle: Cleanup the setting of the FLAGS and OPTIONS variables
  Coccinelle: Restore coccicheck verbosity in ONLINE mode (C=1 or C=2)
  scripts/package/Makefile: compare objtree with srctree instead of test KBUILD_OUTPUT
  doc: change example to existing Makefile fragment
  scripts/tags.sh: Add magic for OFFSET and DEFINE
2013-05-07 07:59:19 -07:00
Linus Torvalds f8ce1faf55 We get rid of the general module prefix confusion with a binary config option,
fix a remove/insert race which Never Happens, and (my favorite) handle the
 case when we have too many modules for a single commandline.  Seriously,
 the kernel is full, please go away!
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRgbGEAAoJENkgDmzRrbjx2+QP/jXs93K/sXw3rL0vBklwCFv6
 IPZmqYZiGjrzqlB4coWkgYRwW1oOsREfAjF5MmfPdykS3fO5kXfdxN4FBdfKp+IZ
 RdsycdGDuSxWomgYsivrrxLBDxDAX1VuBOjr6mu5Uuk/pCjFa61cfJDiErsu0jKz
 2EMTc98A+E71XamJdvbtal5MUIu9yeluJWG2ux2+VbCul4MSpMc//0n2nrws/RCB
 AoC96AT/Xf4U10a8zT8RfCJ29M5Vvx/KfTIcFiZvtCQxEaHNNmj831gDNiw/3jFI
 ndRph+VLHBsMoBMxfzNRrM+evqkq8+AGEGRj3ycQy5Pa6DunPyzMafWOVGBGnmaS
 tl9hATGx1438048i5tUn8ieAYG1YL1HM83hQovpCThfUKQMiq186iDt1SYYmlq3g
 0thj3znQqZDYhboPtgWzOMUdqOG/iBIKjhGQjjHZs+MInFgxL2hmax0gBNkvEtQb
 oLyfGbF6UjS7I/Md/HohnUQ4xr9kYa3MQeqPjKbRwgHRkdXhzTEZtI+MYDJBxOnW
 QGVQ97aJ2WA7vC7sz/1VhTcZqmU5zfrSc8lF+Ea+H8dQGHHbz8HxKQacEvKcMrXl
 OJyEkRUWDA0MTjeIHzn2fff9Q6/qqA1QejRiFofGJrpxopcJS84/7yA0repxvuMG
 yaMPsLq53UW37/AXYsho
 =MPiD
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull mudule updates from Rusty Russell:
 "We get rid of the general module prefix confusion with a binary config
  option, fix a remove/insert race which Never Happens, and (my
  favorite) handle the case when we have too many modules for a single
  commandline.  Seriously, the kernel is full, please go away!"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modpost: fix unwanted VMLINUX_SYMBOL_STR expansion
  X.509: Support parse long form of length octets in Authority Key Identifier
  module: don't unlink the module until we've removed all exposure.
  kernel: kallsyms: memory override issue, need check destination buffer length
  MODSIGN: do not send garbage to stderr when enabling modules signature
  modpost: handle huge numbers of modules.
  modpost: add -T option to read module names from file/stdin.
  modpost: minor cleanup.
  genksyms: pass symbol-prefix instead of arch
  module: fix symbol versioning with symbol prefixes
  CONFIG_SYMBOL_PREFIX: cleanup.
2013-05-05 10:58:06 -07:00
Linus Torvalds 4d26aa3054 ARM: arm-soc non-critical fixes for 3.10
Here is a collection of fixes (and some intermixed cleanups) that were
 considered less important and thus not included in the later parts of
 the 3.9-rc cycle.
 
 It's a bit all over the map, contents wise. A series of ux500 fixes
 and cleanups, a bunch of various fixes for OMAP and tegra, and some for
 Freescale i.MX and even Qualcomm MSM.
 
 Note that there's also a patch on this branch to globally turn off
 -Wmaybe-uninitialized when building with -Os. It's been posted several
 times by Arnd and no dissent was raised, but nobody seemed interested
 to pick it up. So here it is, as the topmost patch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRggtQAAoJEIwa5zzehBx3TmYP/i4Kt3JDYEbYyAqNsH3nb0mN
 3kLwViUxDdS/aZCXEaNYLwZBUgl1Zyz3oRd39zFCo4dRM2uG1AW+lC73AP3/eW6n
 2oHxI43xzwjDNPxRkiipB4NXPyIoIdbRXM6/QIxXzM9zD3MJXj7BpBBpDgGAsLov
 BQ2r28idxZE6jB4puPjVZCuyG5UMjA0Ko2Fp2em7QXarQBBscDvhAtjqNZ3JPtlN
 thASsou1B8805J7jf5G8Wz6fNeVJg2wlWMgE9ywJpKFbut4cGM4riS/QvB0fTe6d
 tmkCae0bw3UD+D+N1gYcZpeGve8oPSHbeyhrSPAfI/wAVBh0J397MgJW5/f0vW8p
 DffLjQI+S450Kw0Bab41Tn0JnMnXtYUo56yjemdxa/NQJF34ycBFQ3HOm6nFxo7U
 6tce2O775uvG0+rJfDbX6M+Mu7QoIi0p8sOdg0/W+pFK08xvaezsOc1NjqTvuYoC
 s/2LYiIJqVG6tFVU0i/46duQhdp0I/Oj7wXtFXH0ZvZPBz0cDaSU3irB3QA9pNt5
 PI6JEBg0FUPUork24gShSUf7un4Itrjlq20HTkC9/z1skx87PbB3Wa7A8jnHeFme
 tpuPRvmfBWhIhp06AIA8znhDik9xuJ4B7ypsFNM0VyoV/qx+TSIHbViVQuwcOf9b
 nAidtuhMjE+P2sAu+VGU
 =bzsu
 -----END PGP SIGNATURE-----

Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-critical fixes from Olof Johansson:
 "Here is a collection of fixes (and some intermixed cleanups) that were
  considered less important and thus not included in the later parts of
  the 3.9-rc cycle.

  It's a bit all over the map, contents wise.  A series of ux500 fixes
  and cleanups, a bunch of various fixes for OMAP and tegra, and some
  for Freescale i.MX and even Qualcomm MSM.

  Note that there's also a patch on this branch to globally turn off
  -Wmaybe-uninitialized when building with -Os.  It's been posted
  several times by Arnd and no dissent was raised, but nobody seemed
  interested to pick it up.  So here it is, as the topmost patch."

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
  Turn off -Wmaybe-uninitialized when building with -Os
  ARM: orion5x: include linux/cpu.h
  ARM: tegra: call cpu_do_idle from C code
  ARM: u300: fix ages old copy/paste bug
  ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7
  ARM: tegra: solve adr range issue with THUMB2_KERNEL enabled
  ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled
  ARM: tegra: fix build error when THUMB2_KERNEL enabled
  ARM: msm: Fix uncompess.h tx underrun check
  ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms
  ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro
  ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
  ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
  ARM: mach-imx: mach-imx6q: Fix sparse warnings
  ARM: mach-imx: src: Include "common.h
  ARM: mach-imx: gpc: Include "common.h"
  ARM: mach-imx: avic: Staticize *avic_base
  ARM: mach-imx: tzic: Staticize *tzic_base
  ARM: mach-imx: clk: Include "clk.h"
  ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops
  ...
2013-05-02 08:56:55 -07:00
Linus Torvalds e0972916e8 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Features:

   - Add "uretprobes" - an optimization to uprobes, like kretprobes are
     an optimization to kprobes.  "perf probe -x file sym%return" now
     works like kretprobes.  By Oleg Nesterov.

   - Introduce per core aggregation in 'perf stat', from Stephane
     Eranian.

   - Add memory profiling via PEBS, from Stephane Eranian.

   - Event group view for 'annotate' in --stdio, --tui and --gtk, from
     Namhyung Kim.

   - Add support for AMD NB and L2I "uncore" counters, by Jacob Shin.

   - Add Ivy Bridge-EP uncore support, by Zheng Yan

   - IBM zEnterprise EC12 oprofile support patchlet from Robert Richter.

   - Add perf test entries for checking breakpoint overflow signal
     handler issues, from Jiri Olsa.

   - Add perf test entry for for checking number of EXIT events, from
     Namhyung Kim.

   - Add perf test entries for checking --cpu in record and stat, from
     Jiri Olsa.

   - Introduce perf stat --repeat forever, from Frederik Deweerdt.

   - Add --no-demangle to report/top, from Namhyung Kim.

   - PowerPC fixes plus a couple of cleanups/optimizations in uprobes
     and trace_uprobes, by Oleg Nesterov.

  Various fixes and refactorings:

   - Fix dependency of the python binding wrt libtraceevent, from
     Naohiro Aota.

   - Simplify some perf_evlist methods and to allow 'stat' to share code
     with 'record' and 'trace', by Arnaldo Carvalho de Melo.

   - Remove dead code in related to libtraceevent integration, from
     Namhyung Kim.

   - Revert "perf sched: Handle PERF_RECORD_EXIT events" to get 'perf
     sched lat' back working, by Arnaldo Carvalho de Melo

   - We don't use Newt anymore, just plain libslang, by Arnaldo Carvalho
     de Melo.

   - Kill a bunch of die() calls, from Namhyung Kim.

   - Fix build on non-glibc systems due to libio.h absence, from Cody P
     Schafer.

   - Remove some perf_session and tracing dead code, from David Ahern.

   - Honor parallel jobs, fix from Borislav Petkov

   - Introduce tools/lib/lk library, initially just removing duplication
     among tools/perf and tools/vm.  from Borislav Petkov

  ... and many more I missed to list, see the shortlog and git log for
  more details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (136 commits)
  perf/x86/intel/P4: Robistify P4 PMU types
  perf/x86/amd: Fix AMD NB and L2I "uncore" support
  perf/x86/amd: Remove old-style NB counter support from perf_event_amd.c
  perf/x86: Check all MSRs before passing hw check
  perf/x86/amd: Add support for AMD NB and L2I "uncore" counters
  perf/x86/intel: Add Ivy Bridge-EP uncore support
  perf/x86/intel: Fix SNB-EP CBO and PCU uncore PMU filter management
  perf/x86: Avoid kfree() in CPU_{STARTING,DYING}
  uprobes/perf: Avoid perf_trace_buf_prepare/submit if ->perf_events is empty
  uprobes/tracing: Don't pass addr=ip to perf_trace_buf_submit()
  uprobes/tracing: Change create_trace_uprobe() to support uretprobes
  uprobes/tracing: Make seq_printf() code uretprobe-friendly
  uprobes/tracing: Make register_uprobe_event() paths uretprobe-friendly
  uprobes/tracing: Make uprobe_{trace,perf}_print() uretprobe-friendly
  uprobes/tracing: Introduce is_ret_probe() and uretprobe_dispatcher()
  uprobes/tracing: Introduce uprobe_{trace,perf}_print() helpers
  uprobes/tracing: Generalize struct uprobe_trace_entry_head
  uprobes/tracing: Kill the pointless local_save_flags/preempt_count calls
  uprobes/tracing: Kill the pointless seq_print_ip_sym() call
  uprobes/tracing: Kill the pointless task_pt_regs() calls
  ...
2013-04-30 07:41:01 -07:00
Arnd Bergmann e74fc973b6 Turn off -Wmaybe-uninitialized when building with -Os
gcc-4.7 and higher add a lot of false positive warnings about
potential uses of uninitialized warnings, but only when optimizing
for size (-Os). This is the default when building allyesconfig,
which turns on CONFIG_CC_OPTIMIZE_FOR_SIZE.

In order to avoid getting a lot of patches that initialize such
variables and accidentally hide real errors along the way, let's
just turn off this warning on the respective gcc versions
when building with size optimizations. The -Wmaybe-uninitialized
option was introduced in the same gcc version (4.7) that is now
causing the false positives, so there is no effect on older compilers.

A side effect is that when building with CONFIG_CC_OPTIMIZE_FOR_SIZE,
we might now see /fewer/ warnings about possibly uninitialized
warnings than with -O2, but that is still much better than seeing
warnings known to be bogus.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-29 16:52:40 +02:00
Linus Torvalds c1be5a5b1b Linux 3.9 2013-04-28 17:36:01 -07:00
Linus Torvalds 60d509fa6a Linux 3.9-rc8 2013-04-21 14:38:45 -07:00
Ingo Molnar 73e21ce28d Merge branch 'perf/urgent' into perf/core
Conflicts:
	arch/x86/kernel/cpu/perf_event_intel.c

Merge in the latest fixes before applying new patches, resolve the conflict.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-21 10:57:33 +02:00
Michal Marek 6615d6c322 rpm-pkg: Do not package the whole source directory
The source tree can contain lots of uninteresting data like tag or
cscope files, packaging which slows down make rpm needlessly. It can
also break the build, if the tree contains an unrelated file named
*.spec. The downside of this change is that new subdirectories have to
be added to the KBUILD_ALLDIRS variable in the top-level Makefile. The
upside is that the behavior is more predictable.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-18 14:56:44 +02:00
Linus Torvalds c208278c5c Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fix from Michal Marek:
 "Fix for a missing dependency when generating scripts/mod/devicetable-offsets.h.
  This dependency got introduced in v3.9-rc1."

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: generate generic headers before recursing into scripts
2013-04-16 19:44:10 -07:00
Linus Torvalds 41ef2d5678 Linux 3.9-rc7 2013-04-14 17:45:16 -07:00
Andreas Schwab a54292f58f kbuild: generate generic headers before recursing into scripts
The headers are now needed inside scripts/mod since 6543bec
("mod/file2alias: make modalias generation safe for cross compiling").

Reported-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Reported-and-tested-by: "Jon Medhurst (Tixy)" <tixy@linaro.org>
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-10 09:55:34 +02:00
Ingo Molnar 529801898b Merge branch 'for-tip' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/core
Pull IBM zEnterprise EC12 support patchlet from Robert Richter.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-08 11:43:30 +02:00
Linus Torvalds 31880c37c1 Linux 3.9-rc6 2013-04-07 20:49:54 -07:00
Linus Torvalds 07961ac7c0 Linux 3.9-rc5 2013-03-31 15:12:43 -07:00
Linus Torvalds 8bb9660418 Linux 3.9-rc4 2013-03-23 16:52:44 -07:00
Ingo Molnar 0a11953851 perf/core improvements and fixes:
. Honor parallel jobs, fix from Borislav Petkov
 
 . Introduce tools/lib/lk library, initially just removing duplication
   among tools/perf and tools/vm. from Borislav Petkov
 
 . Fix build on non-glibc systems due to libio.h absence, from Cody P Schafer.
 
 . Remove some perf_session and tracing dead code, from David Ahern.
 
 . Introduce perf stat --repeat forever, from Frederik Deweerdt.
 
 . Add perf test entries for checking --cpu in record and stat, from Jiri Olsa.
 
 . Add perf test entries for checking breakpoint overflow signal handler issues,
   from Jiri Olsa.
 
 . Add perf test entry for for checking number of EXIT events, from Namhyung Kim.
 
 . Simplify some perf_evlist methods and to allow 'stat' to share code with
   'record' and 'trace'.
 
 . Remove dead code in related to libtraceevent integration, from Namhyung Kim.
 
 . Event group view for 'annotate' in --stdio, --tui and --gtk, from Namhyung Kim.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJRRzSdAAoJENZQFvNTUqpA7zoP/jG/sMD4h1TfXjZr5PXKNunh
 6XHluOh9ndIWFnvUffU5UbYFyRQml9Djjs7wewqBJCdDm6IDOwtTIz/5Eo5ubADY
 Bu27R8+WbgwsklRCYpdnYO8rJ88sqT9NQYhrtgaaq5UCtGosGsIQUnvjqY8BYILv
 yiNwARpaVZwUEd01ZVxKjriPo6fXftLo05NgC/gRrC81TzTwgRAhioWETVG8gxYK
 8ta/Q5ITU5oJbq9cIMPHgWzj17JI2rDC4dtTdW0uGqK1/5fkDhg/B1lGmMAXKJG/
 wh5EpbcK/Ce6Mns84g31jO1MfQjXWqBmv3EjqsBeDWbVnh02qo5Ej0ktswXTA7C4
 5aV3tvAgeWQc9xjiCoJjeSjX02ypABu/uzaOGt1uFvSsBZ1vPUzXSQj6BwUBlElI
 ojbNSprDRQW56hwcFEzMH2UIOeWzfPCX6sAPK8Wx++tas3PpY3dn/pBZUeU2IlH8
 vr7QqieIdGn/l2j0bsuqHt04r8t/q7tkwX09zAn42jNF5//ZRLx3KuQ5kyaKjGSj
 +S+h2crQm07GwNmRtvIF4gA+/22cu0NhHvlLgZUsuiw01vezkS2v/XDupChjyaMl
 OU9/4XUopwf9FSQ5OCKh7QpL6TFXawUgcKF1ooh5DY33qLX934vXPhygiqSOrMaQ
 bHtB+Q2SJUy8KJT5m+Cw
 =mrYT
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Conflicts:
	tools/Makefile

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

. Honor parallel jobs, fix from Borislav Petkov

. Introduce tools/lib/lk library, initially just removing duplication
  among tools/perf and tools/vm. from Borislav Petkov

. Fix build on non-glibc systems due to libio.h absence, from Cody P Schafer.

. Remove some perf_session and tracing dead code, from David Ahern.

. Introduce perf stat --repeat forever, from Frederik Deweerdt.

. Add perf test entries for checking --cpu in record and stat, from Jiri Olsa.

. Add perf test entries for checking breakpoint overflow signal handler issues,
  from Jiri Olsa.

. Add perf test entry for for checking number of EXIT events, from Namhyung Kim.

. Simplify some perf_evlist methods and to allow 'stat' to share code with
  'record' and 'trace'.

. Remove dead code in related to libtraceevent integration, from Namhyung Kim.

. Event group view for 'annotate' in --stdio, --tui and --gtk, from Namhyung Kim.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[ resolved the trivial merge conflict with upstream ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-21 11:06:12 +01:00
Linus Torvalds a937536b86 Linux 3.9-rc3 2013-03-17 15:59:32 -07:00
Borislav Petkov a50e433327 perf tools: Honor parallel jobs
We need to hand down parallel build options like the internal make
--jobserver-fds one so that parallel builds can also happen when
building perf from the toplevel directory.

Make it so #1!

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1361374353-30385-3-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:05:59 -03:00
Rusty Russell b92021b09d CONFIG_SYMBOL_PREFIX: cleanup.
We have CONFIG_SYMBOL_PREFIX, which three archs define to the string
"_".  But Al Viro broke this in "consolidate cond_syscall and
SYSCALL_ALIAS declarations" (in linux-next), and he's not the first to
do so.

Using CONFIG_SYMBOL_PREFIX is awkward, since we usually just want to
prefix it so something.  So various places define helpers which are
defined to nothing if CONFIG_SYMBOL_PREFIX isn't set:

1) include/asm-generic/unistd.h defines __SYMBOL_PREFIX.
2) include/asm-generic/vmlinux.lds.h defines VMLINUX_SYMBOL(sym)
3) include/linux/export.h defines MODULE_SYMBOL_PREFIX.
4) include/linux/kernel.h defines SYMBOL_PREFIX (which differs from #7)
5) kernel/modsign_certificate.S defines ASM_SYMBOL(sym)
6) scripts/modpost.c defines MODULE_SYMBOL_PREFIX
7) scripts/Makefile.lib defines SYMBOL_PREFIX on the commandline if
   CONFIG_SYMBOL_PREFIX is set, so that we have a non-string version
   for pasting.

(arch/h8300/include/asm/linkage.h defines SYMBOL_NAME(), too).

Let's solve this properly:
1) No more generic prefix, just CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX.
2) Make linux/export.h usable from asm.
3) Define VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR().
4) Make everyone use them.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com> (metag)
2013-03-15 15:09:43 +10:30
Linus Torvalds f6161aa153 Linux 3.9-rc2 2013-03-10 16:54:19 -07:00
Linus Torvalds 6dbe51c251 Linux 3.9-rc1 2013-03-03 15:11:05 -08:00
Linus Torvalds 0ca7ffb356 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild changes from Michal Marek:

 - Alias generation in modpost is cross-compile safe.

 - kernel/timeconst.h is now generated using a bc script instead of
   perl.

 - scripts/link-vmlinux.sh now works with an alternative
   $KCONFIG_CONFIG.

 - destination-y for exported headers is supported in Kbuild files
   again.

 - depmod is called with -P $CONFIG_SYMBOL_PREFIX on architectures that
   need it.

 - CONFIG_DEBUG_INFO_REDUCED disables var-tracking

 - scripts/setlocalversion works with too much translated locales ;)

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Fix reading of .config in link-vmlinux.sh
  kbuild: Unset language specific variables in setlocalversion script
  Kbuild: Disable var tracking with CONFIG_DEBUG_INFO_REDUCED
  depmod: pass -P $CONFIG_SYMBOL_PREFIX
  kbuild: Fix destination-y for installed headers
  scripts/link-vmlinux.sh: source variables from KCONFIG_CONFIG
  kernel: Replace timeconst.pl with a bc script
  mod/file2alias: make modalias generation safe for cross compiling
2013-02-27 12:25:47 -08:00
Linus Torvalds 9043a2650c The sweeping change is to make add_taint() explicitly indicate whether to disable
lockdep, but it's a mechanical change.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRJAcuAAoJENkgDmzRrbjxsw0P/3eXb+LddYnx0V0uHYdKpCUf
 4vdW7X0fX3Z+aUK69IWRL/6ahoO4TpaHYGHBDjEoivyQ0GDq14X7JNWsYYt3LdMf
 3wmDgRc2cn/mZOJbFeVpNV8ox5l/xc0CUvV+iQ8tMjfQItXMXgWUFZKMECsXKSO6
 eex3lrw9M2jAX2uL8LQPp9W8xtKu24nSZRC6tH5riE/8fCzi1cZPPAqfxP5c8Lee
 ZXtbCRSyAFENZLpKyMe1PC7HvtJyi5NDn9xwOQiXULZV/VOlvP94DGBLIKCM/6dn
 4QvZxpG0P0uOlpCgRAVLyh/z7g4XY4VF/fHopLCmEcqLsvgD+V2LQpQ9zWUalLPC
 Z+pUpz2vu0gIddPU1nR8R6oGpEdJ8O12aJle62p/RSXWZGx12qUQ+Tamu0tgKcv1
 AsiJfbUGNDYfxgU6sHsoQjl2f68LTVckCU1C1LqEbW/S104EIORtGx30CHM4LRiO
 32kDC5TtgYDBKQAIqJ4bL48ZMh+9W3uX40p7xzOI5khHQjvswUKa3jcxupU0C1uv
 lx8KXo7pn8WT33QGysWC782wJCgJuzSc2vRn+KQoqoynuHGM6agaEtR59gil3QWO
 rQEcxH63BBRDgHlg4FM9IkJwwsnC3PWKL8gbX0uAWXAPMbgapJkuuGZAwt0WDGVK
 +GszxsFkCjlW0mK0egTb
 =tiSY
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module update from Rusty Russell:
 "The sweeping change is to make add_taint() explicitly indicate whether
  to disable lockdep, but it's a mechanical change."

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  MODSIGN: Add option to not sign modules during modules_install
  MODSIGN: Add -s <signature> option to sign-file
  MODSIGN: Specify the hash algorithm on sign-file command line
  MODSIGN: Simplify Makefile with a Kconfig helper
  module: clean up load_module a little more.
  modpost: Ignore ARC specific non-alloc sections
  module: constify within_module_*
  taint: add explicit flag to show whether lock dep is still OK.
  module: printk message when module signature fail taints kernel.
2013-02-25 15:41:43 -08:00
Andi Kleen e82c4bb8b4 Kbuild: Disable var tracking with CONFIG_DEBUG_INFO_REDUCED
Newer gcc enables the var-tracking pass with -g to keep track which
registers contain which variables. This is one of the slower passes in gcc.

With reduced debug info (aimed at objdump -S, but not using a full debugger)
we don't need this fine grained tracking. But it was still enabled
because -g was enabled. Disable it explicitely for DEBUG_INFO_REDUCED.

On my 8T workstation this gives me about a 12 second gain in building
a reasonable kernel config (2min16 vs 2min28) with DEBUG_INFO_REDUCED.
With full DEBUG_INFO it takes 2min46

The actual improvement in user time taken by the compiler is much higher
(all CPU combined user time 15min5s vs 16m30 before)
but the usual amdahl bottleneck on the linker prevents more speedup.
It still saves some more energy and keeps cycles for other things.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-02-22 13:45:56 +01:00
James Hogan 8937e89718 depmod: pass -P $CONFIG_SYMBOL_PREFIX
On architectures which have symbol prefixes, depmod emits lots of
warnings like this:

WARNING: $module.ko needs unknown symbol $symbol

This is because depmod isn't being passed the -P <symbol_prefix>
arguments to specify the symbol prefix to ignore. This option is
included since the 3.13 release of module-init-tools.

Update scripts/depmod.sh to take extra arguments for the symbol prefix
(required but may be empty), and update the main Makefile to always pass
"$(CONFIG_SYMBOL_PREFIX)" to scripts/depmod.sh.

If the provided symbol prefix is non-empty, scripts/depmod.sh checks if
depmod --version reports module-init-tools with a version number < 3.13
otherwise it appends -P $SYMBOL_PREFIX to the depmod command line.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-dist-devel@blackfin.uclinux.org
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-02-22 11:52:31 +01:00
Linus Torvalds 121027a7a6 Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull two x86 kernel build changes from Ingo Molnar:
 "The first change modifies how 'make oldconfig' works on cross-bitness
  situations on x86.  It was felt the new behavior of preserving the
  bitness of the .config is more logical.  This is a leftover of the
  merge.

  The second change eliminates a Perl warning.  (There's another, more
  complete fix resulting of this warning fix, which second fix in flight
  to you via the kbuild tree, which will remove the timeconst.pl script
  altogether.)"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timeconst.pl: Eliminate Perl warning
  x86: Default to ARCH=x86 to avoid overriding CONFIG_64BIT
2013-02-19 19:12:03 -08:00
Linus Torvalds 19f949f525 Linux 3.8 2013-02-18 15:58:34 -08:00
Linus Torvalds 836dc9e3fb Linux 3.8-rc7 2013-02-09 08:20:39 +11:00
Linus Torvalds 88b62b915b Linux 3.8-rc6 2013-02-01 12:08:14 +11:00
Linus Torvalds 949db153b6 Linux 3.8-rc5 2013-01-25 11:57:28 -08:00
Michal Marek d9d8d7ed49 MODSIGN: Add option to not sign modules during modules_install
To allow the builder to sign only a subset of modules, or to sign the
modules using a key that is not available on the build machine, add
CONFIG_MODULE_SIG_ALL. If this option is unset, no modules will be
signed during build. The default is 'y', to preserve the current
behavior.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-01-25 16:55:37 +10:30
Michal Marek 4bc9410c0c MODSIGN: Specify the hash algorithm on sign-file command line
Make the script usable without a .config file.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-01-25 16:55:36 +10:30
Andreas Schwab 6543becf26 mod/file2alias: make modalias generation safe for cross compiling
Use the target compiler to compute the offsets for the fields of the
device_id structures, so that it won't be broken by different alignments
between the host and target ABIs.

This also fixes missing endian corrections for some modaliases.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-01-24 22:48:04 +01:00
Will Deacon f1b99392ca arm64: makefile: fix uname munging when setting ARCH on native machine
By popular demand, arch/aarch64 is now known as arch/arm64. However,
uname -m (and indeed the GNU triplet) still use aarch64 as the machine
string.

This patch fixes native builds of both the kernel and perf tools by
updating the relevant Makefiles to munge the output of uname -m and
set the ARCH variable appropriately.

Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-01-22 17:51:00 +00:00
Linus Torvalds 7d1f9aeff1 Linux 3.8-rc4 2013-01-17 19:25:45 -08:00
Linus Torvalds 9931faca02 Linux 3.8-rc3 2013-01-09 18:59:55 -08:00
Linus Torvalds d1c3ed669a Linux 3.8-rc2 2013-01-02 18:13:21 -08:00
Linus Torvalds a49f0d1ea3 Linux 3.8-rc1 2012-12-21 17:19:00 -08:00
David Woodhouse ffee0de411 x86: Default to ARCH=x86 to avoid overriding CONFIG_64BIT
It is easy to waste a bunch of time when one takes a 32-bit .config
from a test machine and try to build it on a faster 64-bit system, and
its existing setting of CONFIG_64BIT=n gets *changed* to match the
build host.  Similarly, if one has an existing build tree it is easy
to trash an entire build tree that way.

This is because the default setting for $ARCH when discovered from
'uname' is one of the legacy pre-x86-merge values (i386 or x86_64),
which effectively force the setting of CONFIG_64BIT to match. We should
default to ARCH=x86 instead, finally completing the merge that we
started so long ago.

This patch preserves the behaviour of the legacy ARCH settings for commands
such as:

   make ARCH=x86_64 randconfig
   make ARCH=i386 randconfig

... since making the value of CONFIG_64BIT actually random in that situation
is not desirable.

In time, perhaps we can retire this legacy use of the old ARCH= values.
We already have a way to override values for *any* config option, using
$KCONFIG_ALLCONFIG, so it could be argued that we don't necessarily need
to keep ARCH={i386,x86_64} around as a special case just for overriding
CONFIG_64BIT.

We'd probably at least want to add a way to override config options from
the command line ('make CONFIG_FOO=y oldconfig') before we talk about doing
that though.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Link: http://lkml.kernel.org/r/1356040315.3198.51.camel@shinybook.infradead.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-12-20 14:37:18 -08:00
Linus Torvalds 810a485551 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild changes from Michal Marek:
 "The kbuild changes are minimal this time:

   - scripts/pnmlogo fix for some newer format

   - minor top-level Makefile cleanup

   - fix for a v3.5 regression with make clean M=<directory>"

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Do not remove vmlinux when cleaning external module
  scripts/pnmtologo: fix for plain PBM
  kbuild: Remove reference to uninitialised variable
2012-12-20 14:15:53 -08:00
Linus Torvalds 7a684c452e Nothing all that exciting; a new module-from-fd syscall for those who want
to verify the source of the module (ChromeOS) and/or use standard IMA on it
 or other security hooks.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ0VKlAAoJENkgDmzRrbjxjuEQALVHpD1cSmryOzVwkNn7rVGP
 PV3KVbUs+qzUCm2c3AafIIlSBm2LOUl+cR3uNC7di8aHarRF3VHkK2OQ4Fx97ECd
 KKBqAyY3R0q1mAKujb/MWwiK0YgosEDIOzGGn2yQhNFsxKqnMB02P4j82IO7+g+w
 Cc3XuDyWHoH2I+ySgz0Q8NHAqufD/DMZUKud7jw2Lsv6PuICJ1Oqgl/Gd/muxort
 4a5tV3tjhRGywHS/8b2fbDUXkybC5NKK0FN+gyoaROmJ/THeHEQDGXZT9bc2vmVx
 HvRy/5k8dzQ6LAJ2mLnPvy0pmv0u7NYMvjxTxxUlUkFMkYuVticikQfwSYDbDPt4
 mbsLxchpgi8z4x8HltEERffCX5tldo/5hz1uemqhqIsMRIrRFnlHkSIgkGjVHf2u
 LXQBLT8uTm6C0VyNQPrI/hUZzIax7WtKbPSoK9lmExNbKqloEFh/mVXvfQxei2kp
 wnUZcnmPIqSvw7b4CWu7HibMYu2VvGBgm3YIfJRi4AQme1mzFYLpZoxF5Pj+Ykbt
 T//Hb1EsNQTTFCg7MZhnJSAw/EVUvNDUoullORClyqw6+xxjVKqWpPJgYDRfWOlJ
 Xa+s7DNrL+Oo1WWR8l5ruoQszbR8szIyeyPKKxRUcQj2zsqghoWuzKAx2saSEw3W
 pNkoJU+dGC7kG/yVAS8N
 =uoJj
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module update from Rusty Russell:
 "Nothing all that exciting; a new module-from-fd syscall for those who
  want to verify the source of the module (ChromeOS) and/or use standard
  IMA on it or other security hooks."

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  MODSIGN: Fix kbuild output when using default extra_certificates
  MODSIGN: Avoid using .incbin in C source
  modules: don't hand 0 to vmalloc.
  module: Remove a extra null character at the top of module->strtab.
  ASN.1: Use the ASN1_LONG_TAG and ASN1_INDEFINITE_LENGTH constants
  ASN.1: Define indefinite length marker constant
  moduleparam: use __UNIQUE_ID()
  __UNIQUE_ID()
  MODSIGN: Add modules_sign make target
  powerpc: add finit_module syscall.
  ima: support new kernel module syscall
  add finit_module syscall to asm-generic
  ARM: add finit_module syscall to ARM
  security: introduce kernel_module_from_file hook
  module: add flags arg to sys_finit_module()
  module: add syscall to load module from fd
2012-12-19 07:55:08 -08:00
Josh Boyer d890f510c8 MODSIGN: Add modules_sign make target
If CONFIG_MODULE_SIG is set, and 'make modules_sign' is called then this
patch will cause the modules to get a signature appended.  The make target
is intended to be run after 'make modules_install', and will modify the
modules in-place in the installed location.  It can be used to produce
signed modules after they have been processed by distribution build
scripts.

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor typo fix)
2012-12-14 13:05:28 +10:30
Linus Torvalds 29594404d7 Linux 3.7 2012-12-10 19:30:57 -08:00
Pawel Moll bd1ee804af kbuild: Do not remove vmlinux when cleaning external module
Since commit 1f2bfbd00e "kbuild:
link of vmlinux moved to a script" make clean with M=<dir>
argument (so cleaning external module) removes vmlinux,
System.map and couple of other files from the *main* kernel
build directory! This not what was happening before and almost
certainly not what one would expect.

This patch moves makes the clean target of the script called
only when !KBUILD_EXTMOD.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Cc: stable@vger.kernel.org [v3.5+]
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-12-09 15:52:10 +01:00
Linus Torvalds b69f0859dc Linux 3.7-rc8 2012-12-03 11:22:37 -08:00
Linus Torvalds 455e987c0c Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "This is mostly about unbreaking architectures that took the UAPI
  changes in the v3.7 cycle, plus misc fixes."

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf kvm: Fix building perf kvm on non x86 arches
  perf kvm: Rename perf_kvm to perf_kvm_stat
  perf: Make perf build for x86 with UAPI disintegration applied
  perf powerpc: Use uapi/unistd.h to fix build error
  tools: Pass the target in descend
  tools: Honour the O= flag when tool build called from a higher Makefile
  tools: Define a Makefile function to do subdir processing
  x86: Export asm/{svm.h,vmx.h,perf_regs.h}
  perf tools: Fix strbuf_addf() when the buffer needs to grow
  perf header: Fix numa topology printing
  perf, powerpc: Fix hw breakpoints returning -ENOSPC
2012-12-01 13:07:48 -08:00
Linus Torvalds 9489e9dcae Linux 3.7-rc7 2012-11-25 17:59:19 -08:00
Charles Keepax 16f8909881 kbuild: Remove reference to uninitialised variable
Verbose output variable is unnecessary because the command's echo is
already surpressed. Additionally because the block defines skip-makefile
the variable Q is not defined within the makefile, which can cause
problems if Q is defined in the users environment.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-11-20 11:25:15 +01:00
David Howells bf35182ffc tools: Honour the O= flag when tool build called from a higher Makefile
Honour the O= flag that was passed to a higher level Makefile and then passed
down as part of a tool build.

To make this work, the top-level Makefile passes the original O= flag and
subdir=tools to the tools/Makefile, and that in turn passes
subdir=$(O)/$(subdir)/foodir when building tool foo in directory
$(O)/$(subdir)/foodir (where the intervening slashes aren't added if an
element is missing).

For example, take perf.  This is found in tools/perf/.  Assume we're building
into directory ~/zebra/, so we pass O=~/zebra to make.  Dependening on where
we run the build from, we see:

	make run in dir		$(OUTPUT) dir
	=======================	==================
	linux			~/zebra/tools/perf/
	linux/tools		~/zebra/perf/
	linux/tools/perf	~/zebra/

and if O= is not set, we get:

	make run in dir		$(OUTPUT) dir
	=======================	==================
	linux			linux/tools/perf/
	linux/tools		linux/tools/perf/
	linux/tools/perf	linux/tools/perf/

The output directories are created by the descend function if they don't
already exist.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1378.1352379110@warthog.procyon.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-11-19 22:10:30 +00:00
Linus Torvalds f4a75d2eb7 Linux 3.7-rc6 2012-11-16 17:42:40 -08:00
Linus Torvalds 77b67063bb Linux 3.7-rc5 2012-11-11 13:44:33 +01:00
Linus Torvalds 3d70f8c617 Linux 3.7-rc4 2012-11-04 11:07:39 -08:00
Linus Torvalds 8f0d8163b5 Linux 3.7-rc3 2012-10-28 12:24:48 -07:00
Linus Torvalds 6f0c0580b7 Linux 3.7-rc2 2012-10-20 12:11:32 -07:00
David Howells b37d1bfb55 MODSIGN: perlify sign-file and merge in x509keyid
Turn sign-file into perl and merge in x509keyid.  The latter doesn't
need to be a separate script as it doesn't actually need to work out the
SHA1 sum of the X.509 certificate itself, since it can get that from the
X.509 certificate.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-19 16:11:21 -07:00
Rusty Russell e2a666d52b kbuild: sign the modules at install time
Linus deleted the old code and put signing on the install command,
I fixed it to extract the keyid and signer-name within sign-file
and cleaned up that script now it always signs in-place.

Some enthusiast should convert sign-key to perl and pull
x509keyid into it.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-19 08:27:43 -07:00
Catalin Marinas 3c5994c838 uapi: Allow automatic generation of uapi/asm/ header files
Several arch/*/include/uapi/asm/* header simply include the
corresponding <asm-generic/*> file. This patch allows such files to be
specified in uapi/asm/Kbuild via "generic-y += ..." to be automatically
generated (similar to asm/Kbuild).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
2012-10-17 12:25:44 +01:00
Linus Torvalds ddffeb8c4d Linux 3.7-rc1 2012-10-14 14:41:04 -07:00
Linus Torvalds d25282d1c9 Merge branch 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module signing support from Rusty Russell:
 "module signing is the highlight, but it's an all-over David Howells frenzy..."

Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG.

* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits)
  X.509: Fix indefinite length element skip error handling
  X.509: Convert some printk calls to pr_devel
  asymmetric keys: fix printk format warning
  MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking
  MODSIGN: Make mrproper should remove generated files.
  MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs
  MODSIGN: Use the same digest for the autogen key sig as for the module sig
  MODSIGN: Sign modules during the build process
  MODSIGN: Provide a script for generating a key ID from an X.509 cert
  MODSIGN: Implement module signature checking
  MODSIGN: Provide module signing public keys to the kernel
  MODSIGN: Automatically generate module signing keys if missing
  MODSIGN: Provide Kconfig options
  MODSIGN: Provide gitignore and make clean rules for extra files
  MODSIGN: Add FIPS policy
  module: signature checking hook
  X.509: Add a crypto key parser for binary (DER) X.509 certificates
  MPILIB: Provide a function to read raw data into an MPI
  X.509: Add an ASN.1 decoder
  X.509: Add simple ASN.1 grammar compiler
  ...
2012-10-14 13:39:34 -07:00
Linus Torvalds ae3e462828 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild changes from Michal Marek:
 "The main part of kbuild for v3.7 contains:
   - Fix for scripts/Makefile.modpost to not choke on a '.ko' substring
     in the build directory path
   - Two warning fixes (modpost and main Makefile)
   - __compiletime_error works also with gcc 4.3
   - make tar{gz,bz2,xz}-pkg uses default compression settings instead
     of saving as many bytes as possible (this should actually be in the
     misc branch, I don't know why I applied it here)."

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  compiler-gcc4.h: correct verion check for __compiletime_error
  modpost: Permit .GCC.command.line sections
  Kbuild: use normal compression settings for tar*-pkg
  scripts/Makefile.modpost: error in finding modules from .mod files.
  kbuild: Remove useless warning while appending KCFLAGS
2012-10-12 10:27:27 +09:00
Rusty Russell d5b719365e MODSIGN: Make mrproper should remove generated files.
It doesn't, because the clean targets don't include kernel/Makefile, and
because two files were missing from the list.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-10 20:06:36 +10:30
David Howells addbcdbbf5 MODSIGN: Provide gitignore and make clean rules for extra files
Provide gitignore and make clean rules for extra files to hide and clean up the
extra files produced by module signing stuff once it is added.  Also add a
clean up rule for the module content extractor program used to extract the data
to be signed.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-10 20:01:19 +10:30
David Howells 10b63956fc UAPI: Plumb the UAPI Kbuilds into the user header installation and checking
Plumb the UAPI Kbuilds into the user header installation and checking system.
As the headers are split the entries will be transferred across from the old
Kbuild files to the UAPI Kbuild files.

The changes made in this commit are:

 (1) Exported generated files (of which there are currently four) are moved to
     uapi/ directories under the appropriate generated/ directory, thus we
     get:

	include/generated/uapi/linux/version.h
	arch/x86/include/generated/uapi/asm/unistd_32.h
	arch/x86/include/generated/uapi/asm/unistd_64.h
	arch/x86/include/generated/uapi/asm/unistd_x32.h

     These paths were added to the build as -I flags in a previous patch.

 (2) scripts/Makefile.headersinst is now given the UAPI path to install from
     rather than the old path.

     It then determines the old path from that and includes that Kbuild also
     if it exists, thus permitting the headers to exist in either directory
     during the changeover.

     I also renamed the "install" variable to "installdir" as it refers to a
     directory not the install program.

 (3) scripts/headers_install.pl is altered to take a list of source file paths
     instead of just their names so that the makefile can tell it exactly
     where to find each file.

     For the moment, files can be obtained from one of four places for each
     output directory:

	.../include/uapi/foo/
	.../include/generated/uapi/foo/
	.../include/foo/
	.../include/generated/foo/

     The non-UAPI paths will be dropped later.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-02 18:01:57 +01:00
David Howells d183e6f570 UAPI: Move linux/version.h
Move include/linux/version.h to the include/generated/ header directory.
A later patch will move it to include/uapi/generated/.

This allows us to get rid of the objhdr-y list.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-02 18:01:56 +01:00
David Howells abbf1590de UAPI: Partition the header include path sets and add uapi/ header directories
Partition the header include path flags into two sets, one for kernelspace
builds and one for userspace builds.

Add the following directories to build after the ordinary include directories
so that #include will pick up the UAPI header directly if the kernel header
has been moved there.

The userspace set (represented by the USERINCLUDE make variable) contains:

	-I $(srctree)/arch/$(hdr-arch)/include/uapi
	-I arch/$(hdr-arch)/include/generated/uapi
	-I $(srctree)/include/uapi
	-I include/generated/uapi
	-include $(srctree)/include/linux/kconfig.h

and the kernelspace set (represented by the LINUXINCLUDE make variable)
contains:

	-I $(srctree)/arch/$(hdr-arch)/include
	-I arch/$(hdr-arch)/include/generated
	-I $(srctree)/include
	-I include		--- if not building in the source tree

plus everything in the USERINCLUDE set.

Then use USERINCLUDE in building the x86 boot code.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-02 18:01:26 +01:00
Linus Torvalds 7e92daaefa Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf update from Ingo Molnar:
 "Lots of changes in this cycle as well, with hundreds of commits from
  over 30 contributors.  Most of the activity was on the tooling side.

  Higher level changes:

   - New 'perf kvm' analysis tool, from Xiao Guangrong.

   - New 'perf trace' system-wide tracing tool

   - uprobes fixes + cleanups from Oleg Nesterov.

   - Lots of patches to make perf build on Android out of box, from
     Irina Tirdea

   - Extend ftrace function tracing utility to be more dynamic for its
     users.  It allows for data passing to the callback functions, as
     well as reading regs as if a breakpoint were to trigger at function
     entry.

     The main goal of this patch series was to allow kprobes to use
     ftrace as an optimized probe point when a probe is placed on an
     ftrace nop.  With lots of help from Masami Hiramatsu, and going
     through lots of iterations, we finally came up with a good
     solution.

   - Add cpumask for uncore pmu, use it in 'stat', from Yan, Zheng.

   - Various tracing updates from Steve Rostedt

   - Clean up and improve 'perf sched' performance by elliminating lots
     of needless calls to libtraceevent.

   - Event group parsing support, from Jiri Olsa

   - UI/gtk refactorings and improvements from Namhyung Kim

   - Add support for non-tracepoint events in perf script python, from
     Feng Tang

   - Add --symbols to 'script', similar to the one in 'report', from
     Feng Tang.

  Infrastructure enhancements and fixes:

   - Convert the trace builtins to use the growing evsel/evlist
     tracepoint infrastructure, removing several open coded constructs
     like switch like series of strcmp to dispatch events, etc.
     Basically what had already been showcased in 'perf sched'.

   - Add evsel constructor for tracepoints, that uses libtraceevent just
     to parse the /format events file, use it in a new 'perf test' to
     make sure the libtraceevent format parsing regressions can be more
     readily caught.

   - Some strange errors were happening in some builds, but not on the
     next, reported by several people, problem was some parser related
     files, generated during the build, didn't had proper make deps, fix
     from Eric Sandeen.

   - Introduce struct and cache information about the environment where
     a perf.data file was captured, from Namhyung Kim.

   - Fix handling of unresolved samples when --symbols is used in
     'report', from Feng Tang.

   - Add union member access support to 'probe', from Hyeoncheol Lee.

   - Fixups to die() removal, from Namhyung Kim.

   - Render fixes for the TUI, from Namhyung Kim.

   - Don't enable annotation in non symbolic view, from Namhyung Kim.

   - Fix pipe mode in 'report', from Namhyung Kim.

   - Move related stats code from stat to util/, will be used by the
     'stat' kvm tool, from Xiao Guangrong.

   - Remove die()/exit() calls from several tools.

   - Resolve vdso callchains, from Jiri Olsa

   - Don't pass const char pointers to basename, so that we can
     unconditionally use libgen.h and thus avoid ifdef BIONIC lines,
     from David Ahern

   - Refactor hist formatting so that it can be reused with the GTK
     browser, From Namhyung Kim

   - Fix build for another rbtree.c change, from Adrian Hunter.

   - Make 'perf diff' command work with evsel hists, from Jiri Olsa.

   - Use the only field_sep var that is set up: symbol_conf.field_sep,
     fix from Jiri Olsa.

   - .gitignore compiled python binaries, from Namhyung Kim.

   - Get rid of die() in more libtraceevent places, from Namhyung Kim.

   - Rename libtraceevent 'private' struct member to 'priv' so that it
     works in C++, from Steven Rostedt

   - Remove lots of exit()/die() calls from tools so that the main perf
     exit routine can take place, from David Ahern

   - Fix x86 build on x86-64, from David Ahern.

   - {int,str,rb}list fixes from Suzuki K Poulose

   - perf.data header fixes from Namhyung Kim

   - Allow user to indicate objdump path, needed in cross environments,
     from Maciek Borzecki

   - Fix hardware cache event name generation, fix from Jiri Olsa

   - Add round trip test for sw, hw and cache event names, catching the
     problem Jiri fixed, after Jiri's patch, the test passes
     successfully.

   - Clean target should do clean for lib/traceevent too, fix from David
     Ahern

   - Check the right variable for allocation failure, fix from Namhyung
     Kim

   - Set up evsel->tp_format regardless of evsel->name being set
     already, fix from Namhyung Kim

   - Oprofile fixes from Robert Richter.

   - Remove perf_event_attr needless version inflation, from Jiri Olsa

   - Introduce libtraceevent strerror like error reporting facility,
     from Namhyung Kim

   - Add pmu mappings to perf.data header and use event names from cmd
     line, from Robert Richter

   - Fix include order for bison/flex-generated C files, from Ben
     Hutchings

   - Build fixes and documentation corrections from David Ahern

   - Assorted cleanups from Robert Richter

   - Let O= makes handle relative paths, from Steven Rostedt

   - perf script python fixes, from Feng Tang.

   - Initial bash completion support, from Frederic Weisbecker

   - Allow building without libelf, from Namhyung Kim.

   - Support DWARF CFI based unwind to have callchains when %bp based
     unwinding is not possible, from Jiri Olsa.

   - Symbol resolution fixes, while fixing support PPC64 files with an
     .opt ELF section was the end goal, several fixes for code that
     handles all architectures and cleanups are included, from Cody
     Schafer.

   - Assorted fixes for Documentation and build in 32 bit, from Robert
     Richter

   - Cache the libtraceevent event_format associated to each evsel
     early, so that we avoid relookups, i.e.  calling pevent_find_event
     repeatedly when processing tracepoint events.

     [ This is to reduce the surface contact with libtraceevents and
        make clear what is that the perf tools needs from that lib: so
        far parsing the common and per event fields.  ]

   - Don't stop the build if the audit libraries are not installed, fix
     from Namhyung Kim.

   - Fix bfd.h/libbfd detection with recent binutils, from Markus
     Trippelsdorf.

   - Improve warning message when libunwind devel packages not present,
     from Jiri Olsa"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (282 commits)
  perf trace: Add aliases for some syscalls
  perf probe: Print an enum type variable in "enum variable-name" format when showing accessible variables
  perf tools: Check libaudit availability for perf-trace builtin
  perf hists: Add missing period_* fields when collapsing a hist entry
  perf trace: New tool
  perf evsel: Export the event_format constructor
  perf evsel: Introduce rawptr() method
  perf tools: Use perf_evsel__newtp in the event parser
  perf evsel: The tracepoint constructor should store sys:name
  perf evlist: Introduce set_filter() method
  perf evlist: Renane set_filters method to apply_filters
  perf test: Add test to check we correctly parse and match syscall open parms
  perf evsel: Handle endianity in intval method
  perf evsel: Know if byte swap is needed
  perf tools: Allow handling a NULL cpu_map as meaning "all cpus"
  perf evsel: Improve tracepoint constructor setup
  tools lib traceevent: Fix error path on pevent_parse_event
  perf test: Fix build failure
  trace: Move trace event enable from fs_initcall to core_initcall
  tracing: Add an option for disabling markers
  ...
2012-10-01 10:28:49 -07:00
Linus Torvalds a0d271cbfe Linux 3.6 2012-09-30 16:47:46 -07:00
Linus Torvalds 979570e029 Linux 3.6-rc7 2012-09-23 18:10:57 -07:00
Linus Torvalds 5698bd757d Linux 3.6-rc6 2012-09-16 14:58:51 -07:00
Ingo Molnar 4553f0b90e Merge branch 'core/rcu' into perf/core
Steve Rostedt asked for the merge of a single commit, into both
the RCU and the perf/tracing tree:

 | Josh made a change to the tracing code that affects both the
 | work Paul McKenney and I are currently doing. At the last
 | Kernel Summit back in August, Linus said when such a case
 | exists, it is best to make a separate branch based off of his
 | tree and place the change there. This way, the repositories
 | that need to share the change can both pull them in and the
 | SHA1 will match for both. Whichever branch is pulled in first
 | by Linus will also pull in the necessary change for the other
 | branch as well.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-13 17:18:38 +02:00
Linus Torvalds 55d512e245 Linux 3.6-rc5 2012-09-08 16:43:45 -07:00
Linus Torvalds 4cbe5a555f Linux 3.6-rc4 2012-09-01 10:39:58 -07:00
Ozan Çağlayan 70cfe02682 kbuild: Remove useless warning while appending KCFLAGS
This is a respin of an older patch sent by Sam Ravnborg:
  http://www.gossamer-threads.com/lists/linux/kernel/1530602

This patch removes the annoying warning:

Makefile:708: "WARNING: Appending $KCFLAGS (-Wno-sign-compare) from command
line to kernel $CFLAGS"

which is printed every time I use KCFLAFS. The commit which introduced the
warning:

69ee0b3 kbuild: do not pick up CFLAGS from the environment

tells about the problems when people have CFLAGS in their environment,
then switches to KCFLAFS which should be enough to solve the issue, but
it anyway introduces a warning. Drop this warning.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-08-31 16:03:16 +02:00
Ingo Molnar 508dc4f8ee Merge branch 'perf/urgent' into perf/core
Pick up the latest fixes because upcoming uprobes changes will rely on it.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-08-28 18:05:55 +02:00
Steven Rostedt a2546fae01 ftrace: Add -mfentry to Makefile on function tracer
Thanks to Andi Kleen, gcc 4.6.0 now supports -mfentry for x86
(and hopefully soon for other archs). What this does is to have
the function profiler start at the beginning of the function
instead of after the stack is set up. As plain -pg (mcount) is
called after the stack is set up, and in some cases can have issues
with the function graph tracer. It also requires frame pointers to
be enabled.

The -mfentry now calls __fentry__ at the beginning of the function.
This allows for compiling without frame pointers and even has the
ability to access parameters if needed.

If the architecture and the compiler both support -mfentry then
use that instead.

Link: http://lkml.kernel.org/r/20120807194059.392617243@goodmis.org

Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-08-23 11:25:02 -04:00
Linus Torvalds fea7a08acb Linux 3.6-rc3 2012-08-22 13:29:06 -07:00
Linus Torvalds d9875690d9 Linux 3.6-rc2 2012-08-16 14:51:24 -07:00
Linus Torvalds 0d7614f09c Linux 3.6-rc1 2012-08-02 16:38:10 -07:00
Linus Torvalds c66d70773c Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fix from Michal Marek:
 "The main kbuild branch ended up with a single commit this time, a fix
  to send errors to stderr"

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Print errors to stderr
2012-07-30 11:22:00 -07:00
Linus Torvalds 28a33cbc24 Linux 3.5 2012-07-21 13:58:29 -07:00
Linus Torvalds 84a1caf145 Linux 3.5-rc7 2012-07-14 15:40:28 -07:00
Linus Torvalds bd0a521e88 Linux 3.5-rc6 2012-07-07 17:23:56 -07:00
Michal Marek 5369f55021 kbuild: Print errors to stderr
... at least in the top-level Makefile and scripts/link-vmlinux.sh.
There are some more instances of the 'echo <error>; exit 1' pattern in
some arch Makefiles and kconfig.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-07-07 23:33:31 +02:00
Linus Torvalds 6887a4131d Linux 3.5-rc5 2012-06-30 16:08:57 -07:00
Linus Torvalds 6b16351acb Linux 3.5-rc4 2012-06-24 12:53:04 -07:00
Paul Mundt a1f42beb8e Makefile: fix up CROSS_COMPILE and READABLE_ASM interaction.
When the READABLE_ASM cc-option tests were added they were done so prior
to the arch Makefile include, resulting in cc-option being run on the
host cc instead of the factoring in the cross prefix set up by the
architecture.

This bumps the include back up so that cc-option actually runs on the
compiler that we're building with.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-18 11:10:58 -07:00
Linus Torvalds 485802a6c5 Linux 3.5-rc3 2012-06-16 17:25:17 -07:00
Linus Torvalds cfaf025112 Linux 3.5-rc2 2012-06-08 18:40:09 -07:00
Linus Torvalds f8f5701bda Linux 3.5-rc1 2012-06-02 18:29:26 -07:00
Linus Torvalds 1347a2cebc Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek.

Fixed up nontrivial merge conflict in Makefile as per Stephen Rothwell
and linux-next (and trivial arch/sparc/Makefile changes due to removed
sparc32 logic).

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  mips: Fix KBUILD_CPPFLAGS definition
  kbuild: fix ia64 link
  kbuild: document KBUILD_LDS, KBUILD_VMLINUX_{INIT,MAIN} and LDFLAGS_vmlinux
  kbuild: link of vmlinux moved to a script
  kbuild: refactor final link of sparc32
  kbuild: drop unused KBUILD_VMLINUX_OBJS from top-level Makefile
  kbuild: Makefile: remove unnecessary check for m68knommu ARCH
2012-05-28 10:32:28 -07:00
Linus Torvalds 269af9a1a0 Merge branch 'x86-extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull exception table generation updates from Ingo Molnar:
 "The biggest change here is to allow the build-time sorting of the
  exception table, to speed up booting.  This is achieved by the
  architecture enabling BUILDTIME_EXTABLE_SORT.  This option is enabled
  for x86 and MIPS currently.

  On x86 a number of fixes and changes were needed to allow build-time
  sorting of the exception table, in particular a relocation invariant
  exception table format was needed.  This required the abstracting out
  of exception table protocol and the removal of 20 years of accumulated
  assumptions about the x86 exception table format.

  While at it, this tree also cleans up various other aspects of
  exception handling, such as early(er) exception handling for
  rdmsr_safe() et al.

  All in one, as the result of these changes the x86 exception code is
  now pretty nice and modern.  As an added bonus any regressions in this
  code will be early and violent crashes, so if you see any of those,
  you'll know whom to blame!"

Fix up trivial conflicts in arch/{mips,x86}/Kconfig files due to nearby
modifications of other core architecture options.

* 'x86-extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
  Revert "x86, extable: Disable presorted exception table for now"
  scripts/sortextable: Handle relative entries, and other cleanups
  x86, extable: Switch to relative exception table entries
  x86, extable: Disable presorted exception table for now
  x86, extable: Add _ASM_EXTABLE_EX() macro
  x86, extable: Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S
  x86, extable: Remove open-coded exception table entries in arch/x86/include/asm/xsave.h
  x86, extable: Remove open-coded exception table entries in arch/x86/include/asm/kvm_host.h
  x86, extable: Remove the now-unused __ASM_EX_SEC macros
  x86, extable: Remove open-coded exception table entries in arch/x86/xen/xen-asm_32.S
  x86, extable: Remove open-coded exception table entries in arch/x86/um/checksum_32.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/usercopy_32.c
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/putuser.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/getuser.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/csum-copy_64.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/copy_user_nocache_64.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/copy_user_64.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/checksum_32.S
  x86, extable: Remove open-coded exception table entries in arch/x86/kernel/test_rodata.c
  x86, extable: Remove open-coded exception table entries in arch/x86/kernel/entry_64.S
  ...
2012-05-23 10:44:35 -07:00
Linus Torvalds 19bec32d7f Merge branches 'x86-asm-for-linus', 'x86-cleanups-for-linus', 'x86-cpu-for-linus', 'x86-debug-for-linus' and 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull initial trivial x86 stuff from Ingo Molnar.

Various random cleanups and trivial fixes.

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64: Eliminate dead ia32 syscall handlers

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pci-calgary_64.c: Remove obsoleted simple_strtoul() usage
  x86: Don't continue booting if we can't load the specified initrd
  x86: kernel/dumpstack.c simple_strtoul cleanup
  x86: kernel/check.c simple_strtoul cleanup
  debug: Add CONFIG_READABLE_ASM
  x86: spinlock.h: Remove REG_PTR_MODE

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cache_info: Fix setup of l2/l3 ids

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Avoid double stack traces with show_regs()

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: microcode_core.c simple_strtoul cleanup
2012-05-23 10:09:50 -07:00
Linus Torvalds e8650a0823 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "As usual, it's mostly typo fixes, redundant code elimination and some
  documentation updates."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
  edac, mips: don't change code that has been removed in edac/mips tree
  xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
  lib: Change mail address of Oskar Schirmer
  net: Change mail address of Oskar Schirmer
  arm/m68k: Change mail address of Sebastian Hess
  i2c: Change mail address of Oskar Schirmer
  net: Fix tcp_build_and_update_options comment in struct tcp_sock
  atomic64_32.h: fix parameter naming mismatch
  Kconfig: replace "--- help ---" with "---help---"
  c2port: fix bogus Kconfig "default no"
  edac: Fix spelling errors.
  qla1280: Remove redundant NULL check before release_firmware() call
  remoteproc: remove redundant NULL check before release_firmware()
  qla2xxx: Remove redundant NULL check before release_firmware() call.
  aic94xx: Get rid of redundant NULL check before release_firmware() call
  tehuti: delete redundant NULL check before release_firmware()
  qlogic: get rid of a redundant test for NULL before call to release_firmware()
  bna: remove redundant NULL test before release_firmware()
  tg3: remove redundant NULL test before release_firmware() call
  typhoon: get rid of redundant conditional before all to release_firmware()
  ...
2012-05-22 19:22:50 -07:00
Linus Torvalds 2ff2b289a6 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf changes from Ingo Molnar:
 "Lots of changes:

   - (much) improved assembly annotation support in perf report, with
     jump visualization, searching, navigation, visual output
     improvements and more.

    - kernel support for AMD IBS PMU hardware features.  Notably 'perf
      record -e cycles:p' and 'perf top -e cycles:p' should work without
      skid now, like PEBS does on the Intel side, because it takes
      advantage of IBS transparently.

    - the libtracevents library: it is the first step towards unifying
      tracing tooling and perf, and it also gives a tracing library for
      external tools like powertop to rely on.

    - infrastructure: various improvements and refactoring of the UI
      modules and related code

    - infrastructure: cleanup and simplification of the profiling
      targets code (--uid, --pid, --tid, --cpu, --all-cpus, etc.)

    - tons of robustness fixes all around

    - various ftrace updates: speedups, cleanups, robustness
      improvements.

    - typing 'make' in tools/ will now give you a menu of projects to
      build and a short help text to explain what each does.

    - ... and lots of other changes I forgot to list.

  The perf record make bzImage + perf report regression you reported
  should be fixed."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (166 commits)
  tracing: Remove kernel_lock annotations
  tracing: Fix initial buffer_size_kb state
  ring-buffer: Merge separate resize loops
  perf evsel: Create events initially disabled -- again
  perf tools: Split term type into value type and term type
  perf hists: Fix callchain ip printf format
  perf target: Add uses_mmap field
  ftrace: Remove selecting FRAME_POINTER with FUNCTION_TRACER
  ftrace/x86: Have x86 ftrace use the ftrace_modify_all_code()
  ftrace: Make ftrace_modify_all_code() global for archs to use
  ftrace: Return record ip addr for ftrace_location()
  ftrace: Consolidate ftrace_location() and ftrace_text_reserved()
  ftrace: Speed up search by skipping pages by address
  ftrace: Remove extra helper functions
  ftrace: Sort all function addresses, not just per page
  tracing: change CPU ring buffer state from tracing_cpumask
  tracing: Check return value of tracing_dentry_percpu()
  ring-buffer: Reset head page before running self test
  ring-buffer: Add integrity check at end of iter read
  ring-buffer: Make addition of pages in ring buffer atomic
  ...
2012-05-22 18:18:55 -07:00
Linus Torvalds 76e10d158e Linux 3.4 2012-05-20 15:29:13 -07:00
H. Peter Anvin 6520fe5564 x86, realmode: 16-bit real-mode code support for relocs tool
A new option is added to the relocs tool called '--realmode'.
This option causes the generation of 16-bit segment relocations
and 32-bit linear relocations for the real-mode code. When
the real-mode code is moved to the low-memory during kernel
initialization, these relocation entries can be used to
relocate the code properly.

In the assembly code 16-bit segment relocations must be relative
to the 'real_mode_seg' absolute symbol. Linear relocations must be
relative to a symbol prefixed with 'pa_'.

16-bit segment relocation is used to load cs:ip in 16-bit code.
Linear relocations are used in the 32-bit code for relocatable
data references. They are declared in the linker script of the
real-mode code.

The relocs tool is moved to arch/x86/tools/relocs.c, and added new
target archscripts that can be used to build scripts needed building
an architecture.  be compiled before building the arch/x86 tree.

[ hpa: accelerating this because it detects invalid absolute
  relocations, a serious bug in binutils 2.22.52.0.x which currently
  produces bad kernels. ]

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-2-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
2012-05-18 19:49:40 -07:00
Arnaldo Carvalho de Melo 16ee6576e2 Merge remote-tracking branch 'tip/perf/urgent' into perf/core
Merge reason: We are going to queue up a dependent patch:

"perf tools: Move parse event automated tests to separated object"

That depends on:

commit e7c72d8
perf tools: Add 'G' and 'H' modifiers to event parsing

Conflicts:
	tools/perf/builtin-stat.c

Conflicted with the recent 'perf_target' patches when checking the
result of perf_evsel open routines to see if a retry is needed to cope
with older kernels where the exclude guest/host perf_event_attr bits
were not used.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-18 13:13:33 -03:00
Linus Torvalds 36be50515f Linux 3.4-rc7
.. and this should hopefully be the last -rc before final 3.4 release.
2012-05-12 18:37:47 -07:00
Linus Torvalds d48b97b403 Linux 3.4-rc6 2012-05-06 15:07:32 -07:00
Sam Ravnborg 1f2bfbd00e kbuild: link of vmlinux moved to a script
Move the final link of vmlinux to a script to improve
readability and maintainability of the code.

The Makefile fragments used to link vmlinux has over the
years seen far too many changes and the logic had become
hard to follow.

As the process by nature is serialized there was
nothing gained including this in the Makefile.

"um" has special link requirments - and the
only way to handle this was to hard-code the linking
of "um" in the script.
This was better than trying to modularize it only for the
benefit of "um" anyway.

The shell script has been improved after input from:
Arnaud Lacombe <lacombar@gmail.com>
Nick Bowler <nbowler@elliptictech.com>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Nick Bowler <nbowler@elliptictech.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-05 21:19:33 +02:00
Sam Ravnborg 9569857051 kbuild: refactor final link of sparc32
sparc32 uses an additional final link to support btfix.
Introduce a new set of exported variables in the top-level Makefile
to make the extra linking step simpler.

sparc32 has hardcoded knowledge of kallsyms support. This fix
include support for EXTRA_KALLSYM_PASS=1.
The ugly part is that it is hardcoded in the arch/sparc/boot
Makefile.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-05 21:19:33 +02:00
Sam Ravnborg 275eb135cf kbuild: drop unused KBUILD_VMLINUX_OBJS from top-level Makefile
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-05 21:19:33 +02:00
Edward Shao a2a8e1bf21 kbuild: Makefile: remove unnecessary check for m68knommu ARCH
ARCH is never set to m68knomm.
make ARCH=m68knomm is not supported anymore.

Signed-off-by: Edward Shao <laface.tw@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-05 00:07:56 +02:00
Linus Torvalds 69964ea4c7 Linux 3.4-rc5 2012-04-29 15:19:10 -07:00
Ingo Molnar 3dbe927b1e Linux 3.4-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPkysaAAoJEHm+PkMAQRiGw9cH/1cepvUZxu/gHZnmWX/FnL0y
 AlyYgC/kHnM4MRp6GRt7RxbnJhVHPmTDuyMS4uZI7IwBr66FZiuL2Ds3tuv5WwBY
 sN24G0plKsNTjQoNdaBsA/M84dLG71YfHehQUCx271huiAalIL3fNJnwNnJHyGQj
 78evmV3/FhoTYISiX+nf18GEzggmU4a7UaQx64VWjkC5qcy8Q0TMLOaRe2QN7atE
 AfNYEMwtOlpHGfFA2SemfD8z4yTwjfmXYfwtqqxeUeLfl9iAh9qWfY6g9UEDAhce
 N1pqA11VNZg8nqUnGizA+p1Ja/lLjpoORYGCvCHrNVMzFnckFiIc/7CJJe/knkY=
 =6w68
 -----END PGP SIGNATURE-----

Merge tag 'v3.4-rc4' into perf/core

Merge v3.4-rc4 - we were on -rc2 before.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-25 08:59:16 +02:00
Linus Torvalds 66f75a5d02 Linux 3.4-rc4 2012-04-21 14:47:52 -07:00
David Daney 1dbdc6f177 kbuild/extable: Hook up sortextable into the build system.
Define a config variable BUILDTIME_EXTABLE_SORT to control build time
sorting of the kernel's exception table.

Patch Makefile to do the sorting when BUILDTIME_EXTABLE_SORT is
selected.

Signed-off-by: David Daney <david.daney@cavium.com>
Link: http://lkml.kernel.org/r/1334872799-14589-4-git-send-email-ddaney.cavm@gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 15:06:56 -07:00
Linus Torvalds e816b57a33 Linux 3.4-rc3 2012-04-15 18:28:29 -07:00
Ingo Molnar a385ec4f11 Linux 3.4-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPgOpXAAoJEHm+PkMAQRiG8eUIAJ3Hjo0o5hqzxol8LWHDGF8s
 3h59qwRtts82u2psStZULPLbBzw6yjn8U5Mcrh7pffwCG2BzBL5rXcmXfvoPaET3
 TjylIj986Jv+jwZyuyZcLzYyoUtgjtq7hnt4tgVVEPlexYs7LxUl8vO8QjxT+bVO
 7eKgzLsXlBC9kw4P5M7kOBQ9NE5vmEcKf+fB3Hu3DqfVJtw9Lb7EeDQj/cbQsGqI
 vavSxe7lMTPsgMP2+hRz4txGTDJNRazkO2BdwfYrcNwTSa8tfBFlamww3y4+eJtq
 MFQfdNxQpumh2++T4IC2i/nLaawH7kWj2EdaRCRLMy9hVlb/v8/wcgd+1nfLkU8=
 =0on9
 -----END PGP SIGNATURE-----

Merge tag 'v3.4-rc2' into perf/core

Merge Linux 3.4-rc2: we were on v3.3, update the base.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-13 09:57:10 +02:00
Borislav Petkov ea01fa9f63 tools: Connect to the kernel build system
Now you can do

$ make tools/<toolname>

from the toplevel kernel directory and have the respective tool built.

If you want to build and install it, do

$ make tools/<toolname>_install

$ make tools/<toolname>_clean

should clean the respective tool directories.

If you want to clean all in tools, simply do

$ make tools/clean

Also, if you want to get what the possible targets are, simply calling

$ make tools/

should give you the short help.

$ make tools/install

installs all tools, of course. Doh.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-6-git-send-email-bp@amd64.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 15:00:17 -03:00
Jiri Kosina e75d660672 Merge branch 'master' into for-next
Merge with latest Linus' tree, as I have incoming patches
that fix code that is newer than current HEAD of for-next.

Conflicts:
	drivers/net/ethernet/realtek/r8169.c
2012-04-08 21:48:52 +02:00
Linus Torvalds 0034102808 Linux 3.4-rc2 2012-04-07 18:30:41 -07:00
Jesper Juhl 450c6076a7 Makefile: improve line wrapping
Break a few lines that go way over the usual 80 column limit that we prefer.
Also adjust the placement of a few line continuations.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-05 16:54:49 -07:00
Linus Torvalds dd775ae254 Linux 3.4-rc1 2012-03-31 16:24:09 -07:00
Linus Torvalds 923f79743c Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild changes from Michal Marek:
 - Unification of cmd_uimage among archs that use it
 - make headers_check tries harder before reporting a missing
   <linux/types.h> include
 - kbuild portability fix for shells that do not support echo -e
 - make clean descends into samples/
 - setlocalversion grep fix
 - modpost typo fix
 - dtc warnings fix

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  setlocalversion: Use "grep -q" instead of piping output to "read dummy"
  modpost: fix ALL_INIT_DATA_SECTIONS
  Kbuild: centralize MKIMAGE and cmd_uimage definitions
  headers_check: recursively search for linux/types.h inclusion
  scripts/Kbuild.include: Fix portability problem of "echo -e"
  scripts: dtc: fix compile warnings
  kbuild: clean up samples directory
  kbuild: disable -Wmissing-field-initializers for W=1
2012-03-30 18:15:43 -07:00
Andi Kleen 1873e870fd debug: Add CONFIG_READABLE_ASM
Add a config option to disable various gcc compiler optimizations that
make assembler listings much harder to read. This is everything that reorders
code significantly or creates partial functions.

This is mainly to keep kernel hackers sane.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1332960678-11879-2-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-03-30 10:15:21 -07:00
Linus Torvalds c16fa4f2ad Linux 3.3 2012-03-18 16:15:34 -07:00
Linus Torvalds fde7d9049e Linux 3.3-rc7 2012-03-10 13:49:52 -08:00
Linus Torvalds 192cfd5877 Linux 3.3-rc6 2012-03-03 17:08:09 -08:00