Граф коммитов

131 Коммитов

Автор SHA1 Сообщение Дата
Joonsoo Kim 6ea41c0c0a mm/compaction.c: avoid premature range skip in isolate_migratepages_range
Commit edc2ca6124 ("mm, compaction: move pageblock checks up from
isolate_migratepages_range()") commonizes isolate_migratepages variants
and make them use isolate_migratepages_block().

isolate_migratepages_block() could stop the execution when enough pages
are isolated, but, there is no code in isolate_migratepages_range() to
handle this case.  In the result, even if isolate_migratepages_block()
returns prematurely without checking all pages in the range,

isolate_migratepages_block() is called repeately on the following
pageblock and some pages in the previous range are skipped to check.
Then, CMA is failed frequently due to this fact.

To fix this problem, this patch let isolate_migratepages_range() know
the situation that enough pages are isolated and stop the isolation in
that case.

Note that isolate_migratepages() has no such problem, because, it always
stops the isolation after just one call of isolate_migratepages_block().

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-29 16:33:13 -07:00
Konstantin Khlebnikov d6d86c0a7f mm/balloon_compaction: redesign ballooned pages management
Sasha Levin reported KASAN splash inside isolate_migratepages_range().
Problem is in the function __is_movable_balloon_page() which tests
AS_BALLOON_MAP in page->mapping->flags.  This function has no protection
against anonymous pages.  As result it tried to check address space flags
inside struct anon_vma.

Further investigation shows more problems in current implementation:

* Special branch in __unmap_and_move() never works:
  balloon_page_movable() checks page flags and page_count.  In
  __unmap_and_move() page is locked, reference counter is elevated, thus
  balloon_page_movable() always fails.  As a result execution goes to the
  normal migration path.  virtballoon_migratepage() returns
  MIGRATEPAGE_BALLOON_SUCCESS instead of MIGRATEPAGE_SUCCESS,
  move_to_new_page() thinks this is an error code and assigns
  newpage->mapping to NULL.  Newly migrated page lose connectivity with
  balloon an all ability for further migration.

* lru_lock erroneously required in isolate_migratepages_range() for
  isolation ballooned page.  This function releases lru_lock periodically,
  this makes migration mostly impossible for some pages.

* balloon_page_dequeue have a tight race with balloon_page_isolate:
  balloon_page_isolate could be executed in parallel with dequeue between
  picking page from list and locking page_lock.  Race is rare because they
  use trylock_page() for locking.

This patch fixes all of them.

Instead of fake mapping with special flag this patch uses special state of
page->_mapcount: PAGE_BALLOON_MAPCOUNT_VALUE = -256.  Buddy allocator uses
PAGE_BUDDY_MAPCOUNT_VALUE = -128 for similar purpose.  Storing mark
directly in struct page makes everything safer and easier.

PagePrivate is used to mark pages present in page list (i.e.  not
isolated, like PageLRU for normal pages).  It replaces special rules for
reference counter and makes balloon migration similar to migration of
normal pages.  This flag is protected by page_lock together with link to
the balloon device.

Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Link: http://lkml.kernel.org/p/53E6CEAA.9020105@oracle.com
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: <stable@vger.kernel.org>	[3.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:01 -04:00
Xiubo Li b8b2d82532 mm/compaction.c: fix warning of 'flags' may be used uninitialized
C      mm/compaction.o
mm/compaction.c: In function isolate_freepages_block:
mm/compaction.c:364:37: warning: flags may be used uninitialized in this function [-Wmaybe-uninitialized]
       && compact_unlock_should_abort(&cc->zone->lock, flags,
                                     ^

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:57 -04:00
David Rientjes 6d7ce55940 mm, compaction: pass gfp mask to compact_control
struct compact_control currently converts the gfp mask to a migratetype,
but we need the entire gfp mask in a follow-up patch.

Pass the entire gfp mask as part of struct compact_control.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:55 -04:00
David Rientjes 43e7a34d26 mm: rename allocflags_to_migratetype for clarity
The page allocator has gfp flags (like __GFP_WAIT) and alloc flags (like
ALLOC_CPUSET) that have separate semantics.

The function allocflags_to_migratetype() actually takes gfp flags, not
alloc flags, and returns a migratetype.  Rename it to
gfpflags_to_migratetype().

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:55 -04:00
Vlastimil Babka 99c0fd5e51 mm, compaction: skip buddy pages by their order in the migrate scanner
The migration scanner skips PageBuddy pages, but does not consider their
order as checking page_order() is generally unsafe without holding the
zone->lock, and acquiring the lock just for the check wouldn't be a good
tradeoff.

Still, this could avoid some iterations over the rest of the buddy page,
and if we are careful, the race window between PageBuddy() check and
page_order() is small, and the worst thing that can happen is that we skip
too much and miss some isolation candidates.  This is not that bad, as
compaction can already fail for many other reasons like parallel
allocations, and those have much larger race window.

This patch therefore makes the migration scanner obtain the buddy page
order and use it to skip the whole buddy page, if the order appears to be
in the valid range.

It's important that the page_order() is read only once, so that the value
used in the checks and in the pfn calculation is the same.  But in theory
the compiler can replace the local variable by multiple inlines of
page_order().  Therefore, the patch introduces page_order_unsafe() that
uses ACCESS_ONCE to prevent this.

Testing with stress-highalloc from mmtests shows a 15% reduction in number
of pages scanned by migration scanner.  The reduction is >60% with
__GFP_NO_KSWAPD allocations, along with success rates better by few
percent.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:54 -04:00
Vlastimil Babka e14c720efd mm, compaction: remember position within pageblock in free pages scanner
Unlike the migration scanner, the free scanner remembers the beginning of
the last scanned pageblock in cc->free_pfn.  It might be therefore
rescanning pages uselessly when called several times during single
compaction.  This might have been useful when pages were returned to the
buddy allocator after a failed migration, but this is no longer the case.

This patch changes the meaning of cc->free_pfn so that if it points to a
middle of a pageblock, that pageblock is scanned only from cc->free_pfn to
the end.  isolate_freepages_block() will record the pfn of the last page
it looked at, which is then used to update cc->free_pfn.

In the mmtests stress-highalloc benchmark, this has resulted in lowering
the ratio between pages scanned by both scanners, from 2.5 free pages per
migrate page, to 2.25 free pages per migrate page, without affecting
success rates.

With __GFP_NO_KSWAPD allocations, this appears to result in a worse ratio
(2.1 instead of 1.8), but page migration successes increased by 10%, so
this could mean that more useful work can be done until need_resched()
aborts this kind of compaction.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:54 -04:00
Vlastimil Babka 69b7189f12 mm, compaction: skip rechecks when lock was already held
Compaction scanners try to lock zone locks as late as possible by checking
many page or pageblock properties opportunistically without lock and
skipping them if not unsuitable.  For pages that pass the initial checks,
some properties have to be checked again safely under lock.  However, if
the lock was already held from a previous iteration in the initial checks,
the rechecks are unnecessary.

This patch therefore skips the rechecks when the lock was already held.
This is now possible to do, since we don't (potentially) drop and
reacquire the lock between the initial checks and the safe rechecks
anymore.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:54 -04:00
Vlastimil Babka 8b44d2791f mm, compaction: periodically drop lock and restore IRQs in scanners
Compaction scanners regularly check for lock contention and need_resched()
through the compact_checklock_irqsave() function.  However, if there is no
contention, the lock can be held and IRQ disabled for potentially long
time.

This has been addressed by commit b2eef8c0d0 ("mm: compaction: minimise
the time IRQs are disabled while isolating pages for migration") for the
migration scanner.  However, the refactoring done by commit 2a1402aa04
("mm: compaction: acquire the zone->lru_lock as late as possible") has
changed the conditions so that the lock is dropped only when there's
contention on the lock or need_resched() is true.  Also, need_resched() is
checked only when the lock is already held.  The comment "give a chance to
irqs before checking need_resched" is therefore misleading, as IRQs remain
disabled when the check is done.

This patch restores the behavior intended by commit b2eef8c0d0 and also
tries to better balance and make more deterministic the time spent by
checking for contention vs the time the scanners might run between the
checks.  It also avoids situations where checking has not been done often
enough before.  The result should be avoiding both too frequent and too
infrequent contention checking, and especially the potentially
long-running scans with IRQs disabled and no checking of need_resched() or
for fatal signal pending, which can happen when many consecutive pages or
pageblocks fail the preliminary tests and do not reach the later call site
to compact_checklock_irqsave(), as explained below.

Before the patch:

In the migration scanner, compact_checklock_irqsave() was called each
loop, if reached.  If not reached, some lower-frequency checking could
still be done if the lock was already held, but this would not result in
aborting contended async compaction until reaching
compact_checklock_irqsave() or end of pageblock.  In the free scanner, it
was similar but completely without the periodical checking, so lock can be
potentially held until reaching the end of pageblock.

After the patch, in both scanners:

The periodical check is done as the first thing in the loop on each
SWAP_CLUSTER_MAX aligned pfn, using the new compact_unlock_should_abort()
function, which always unlocks the lock (if locked) and aborts async
compaction if scheduling is needed.  It also aborts any type of compaction
when a fatal signal is pending.

The compact_checklock_irqsave() function is replaced with a slightly
different compact_trylock_irqsave().  The biggest difference is that the
function is not called at all if the lock is already held.  The periodical
need_resched() checking is left solely to compact_unlock_should_abort().
The lock contention avoidance for async compaction is achieved by the
periodical unlock by compact_unlock_should_abort() and by using trylock in
compact_trylock_irqsave() and aborting when trylock fails.  Sync
compaction does not use trylock.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:54 -04:00
Vlastimil Babka 1f9efdef4f mm, compaction: khugepaged should not give up due to need_resched()
Async compaction aborts when it detects zone lock contention or
need_resched() is true.  David Rientjes has reported that in practice,
most direct async compactions for THP allocation abort due to
need_resched().  This means that a second direct compaction is never
attempted, which might be OK for a page fault, but khugepaged is intended
to attempt a sync compaction in such case and in these cases it won't.

This patch replaces "bool contended" in compact_control with an int that
distinguishes between aborting due to need_resched() and aborting due to
lock contention.  This allows propagating the abort through all compaction
functions as before, but passing the abort reason up to
__alloc_pages_slowpath() which decides when to continue with direct
reclaim and another compaction attempt.

Another problem is that try_to_compact_pages() did not act upon the
reported contention (both need_resched() or lock contention) immediately
and would proceed with another zone from the zonelist.  When
need_resched() is true, that means initializing another zone compaction,
only to check again need_resched() in isolate_migratepages() and aborting.
 For zone lock contention, the unintended consequence is that the lock
contended status reported back to the allocator is detrmined from the last
zone where compaction was attempted, which is rather arbitrary.

This patch fixes the problem in the following way:
- async compaction of a zone aborting due to need_resched() or fatal signal
  pending means that further zones should not be tried. We report
  COMPACT_CONTENDED_SCHED to the allocator.
- aborting zone compaction due to lock contention means we can still try
  another zone, since it has different set of locks. We report back
  COMPACT_CONTENDED_LOCK only if *all* zones where compaction was attempted,
  it was aborted due to lock contention.

As a result of these fixes, khugepaged will proceed with second sync
compaction as intended, when the preceding async compaction aborted due to
need_resched().  Page fault compactions aborting due to need_resched()
will spare some cycles previously wasted by initializing another zone
compaction only to abort again.  Lock contention will be reported only
when compaction in all zones aborted due to lock contention, and therefore
it's not a good idea to try again after reclaim.

In stress-highalloc from mmtests configured to use __GFP_NO_KSWAPD, this
has improved number of THP collapse allocations by 10%, which shows
positive effect on khugepaged.  The benchmark's success rates are
unchanged as it is not recognized as khugepaged.  Numbers of compact_stall
and compact_fail events have however decreased by 20%, with
compact_success still a bit improved, which is good.  With benchmark
configured not to use __GFP_NO_KSWAPD, there is 6% improvement in THP
collapse allocations, and only slight improvement in stalls and failures.

[akpm@linux-foundation.org: fix warnings]
Reported-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:54 -04:00
Vlastimil Babka 7d49d88683 mm, compaction: reduce zone checking frequency in the migration scanner
The unification of the migrate and free scanner families of function has
highlighted a difference in how the scanners ensure they only isolate
pages of the intended zone.  This is important for taking zone lock or lru
lock of the correct zone.  Due to nodes overlapping, it is however
possible to encounter a different zone within the range of the zone being
compacted.

The free scanner, since its inception by commit 748446bb6b ("mm:
compaction: memory compaction core"), has been checking the zone of the
first valid page in a pageblock, and skipping the whole pageblock if the
zone does not match.

This checking was completely missing from the migration scanner at first,
and later added by commit dc9086004b ("mm: compaction: check for
overlapping nodes during isolation for migration") in a reaction to a bug
report.  But the zone comparison in migration scanner is done once per a
single scanned page, which is more defensive and thus more costly than a
check per pageblock.

This patch unifies the checking done in both scanners to once per
pageblock, through a new pageblock_pfn_to_page() function, which also
includes pfn_valid() checks.  It is more defensive than the current free
scanner checks, as it checks both the first and last page of the
pageblock, but less defensive by the migration scanner per-page checks.
It assumes that node overlapping may result (on some architecture) in a
boundary between two nodes falling into the middle of a pageblock, but
that there cannot be a node0 node1 node0 interleaving within a single
pageblock.

The result is more code being shared and a bit less per-page CPU cost in
the migration scanner.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:54 -04:00
Vlastimil Babka edc2ca6124 mm, compaction: move pageblock checks up from isolate_migratepages_range()
isolate_migratepages_range() is the main function of the compaction
scanner, called either on a single pageblock by isolate_migratepages()
during regular compaction, or on an arbitrary range by CMA's
__alloc_contig_migrate_range().  It currently perfoms two pageblock-wide
compaction suitability checks, and because of the CMA callpath, it tracks
if it crossed a pageblock boundary in order to repeat those checks.

However, closer inspection shows that those checks are always true for CMA:
- isolation_suitable() is true because CMA sets cc->ignore_skip_hint to true
- migrate_async_suitable() check is skipped because CMA uses sync compaction

We can therefore move the compaction-specific checks to
isolate_migratepages() and simplify isolate_migratepages_range().
Furthermore, we can mimic the freepage scanner family of functions, which
has isolate_freepages_block() function called both by compaction from
isolate_freepages() and by CMA from isolate_freepages_range(), where each
use-case adds own specific glue code.  This allows further code
simplification.

Thus, we rename isolate_migratepages_range() to
isolate_migratepages_block() and limit its functionality to a single
pageblock (or its subset).  For CMA, a new different
isolate_migratepages_range() is created as a CMA-specific wrapper for the
_block() function.  The checks specific to compaction are moved to
isolate_migratepages().  As part of the unification of these two families
of functions, we remove the redundant zone parameter where applicable,
since zone pointer is already passed in cc->zone.

Furthermore, going back to compact_zone() and compact_finished() when
pageblock is found unsuitable (now by isolate_migratepages()) is wasteful
- the checks are meant to skip pageblocks quickly.  The patch therefore
also introduces a simple loop into isolate_migratepages() so that it does
not return immediately on failed pageblock checks, but keeps going until
isolate_migratepages_range() gets called once.  Similarily to
isolate_freepages(), the function periodically checks if it needs to
reschedule or abort async compaction.

[iamjoonsoo.kim@lge.com: fix isolated page counting bug in compaction]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:54 -04:00
Vlastimil Babka f8224aa5a0 mm, compaction: do not recheck suitable_migration_target under lock
isolate_freepages_block() rechecks if the pageblock is suitable to be a
target for migration after it has taken the zone->lock.  However, the
check has been optimized to occur only once per pageblock, and
compact_checklock_irqsave() might be dropping and reacquiring lock, which
means somebody else might have changed the pageblock's migratetype
meanwhile.

Furthermore, nothing prevents the migratetype to change right after
isolate_freepages_block() has finished isolating.  Given how imperfect
this is, it's simpler to just rely on the check done in
isolate_freepages() without lock, and not pretend that the recheck under
lock guarantees anything.  It is just a heuristic after all.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:54 -04:00
Vlastimil Babka 53853e2d2b mm, compaction: defer each zone individually instead of preferred zone
When direct sync compaction is often unsuccessful, it may become deferred
for some time to avoid further useless attempts, both sync and async.
Successful high-order allocations un-defer compaction, while further
unsuccessful compaction attempts prolong the compaction deferred period.

Currently the checking and setting deferred status is performed only on
the preferred zone of the allocation that invoked direct compaction.  But
compaction itself is attempted on all eligible zones in the zonelist, so
the behavior is suboptimal and may lead both to scenarios where 1)
compaction is attempted uselessly, or 2) where it's not attempted despite
good chances of succeeding, as shown on the examples below:

1) A direct compaction with Normal preferred zone failed and set
   deferred compaction for the Normal zone.  Another unrelated direct
   compaction with DMA32 as preferred zone will attempt to compact DMA32
   zone even though the first compaction attempt also included DMA32 zone.

   In another scenario, compaction with Normal preferred zone failed to
   compact Normal zone, but succeeded in the DMA32 zone, so it will not
   defer compaction.  In the next attempt, it will try Normal zone which
   will fail again, instead of skipping Normal zone and trying DMA32
   directly.

2) Kswapd will balance DMA32 zone and reset defer status based on
   watermarks looking good.  A direct compaction with preferred Normal
   zone will skip compaction of all zones including DMA32 because Normal
   was still deferred.  The allocation might have succeeded in DMA32, but
   won't.

This patch makes compaction deferring work on individual zone basis
instead of preferred zone.  For each zone, it checks compaction_deferred()
to decide if the zone should be skipped.  If watermarks fail after
compacting the zone, defer_compaction() is called.  The zone where
watermarks passed can still be deferred when the allocation attempt is
unsuccessful.  When allocation is successful, compaction_defer_reset() is
called for the zone containing the allocated page.  This approach should
approximate calling defer_compaction() only on zones where compaction was
attempted and did not yield allocated page.  There might be corner cases
but that is inevitable as long as the decision to stop compacting dues not
guarantee that a page will be allocated.

Due to a new COMPACT_DEFERRED return value, some functions relying
implicitly on COMPACT_SKIPPED = 0 had to be updated, with comments made
more accurate.  The did_some_progress output parameter of
__alloc_pages_direct_compact() is removed completely, as the caller
actually does not use it after compaction sets it - it is only considered
when direct reclaim sets it.

During testing on a two-node machine with a single very small Normal zone
on node 1, this patch has improved success rates in stress-highalloc
mmtests benchmark.  The success here were previously made worse by commit
3a025760fc ("mm: page_alloc: spill to remote nodes before waking
kswapd") as kswapd was no longer resetting often enough the deferred
compaction for the Normal zone, and DMA32 zones on both nodes were thus
not considered for compaction.  On different machine, success rates were
improved with __GFP_NO_KSWAPD allocations.

[akpm@linux-foundation.org: fix CONFIG_COMPACTION=n build]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:53 -04:00
Vlastimil Babka be9765722e mm, compaction: properly signal and act upon lock and need_sched() contention
Compaction uses compact_checklock_irqsave() function to periodically check
for lock contention and need_resched() to either abort async compaction,
or to free the lock, schedule and retake the lock.  When aborting,
cc->contended is set to signal the contended state to the caller.  Two
problems have been identified in this mechanism.

First, compaction also calls directly cond_resched() in both scanners when
no lock is yet taken.  This call either does not abort async compaction,
or set cc->contended appropriately.  This patch introduces a new
compact_should_abort() function to achieve both.  In isolate_freepages(),
the check frequency is reduced to once by SWAP_CLUSTER_MAX pageblocks to
match what the migration scanner does in the preliminary page checks.  In
case a pageblock is found suitable for calling isolate_freepages_block(),
the checks within there are done on higher frequency.

Second, isolate_freepages() does not check if isolate_freepages_block()
aborted due to contention, and advances to the next pageblock.  This
violates the principle of aborting on contention, and might result in
pageblocks not being scanned completely, since the scanning cursor is
advanced.  This problem has been noticed in the code by Joonsoo Kim when
reviewing related patches.  This patch makes isolate_freepages_block()
check the cc->contended flag and abort.

In case isolate_freepages() has already isolated some pages before
aborting due to contention, page migration will proceed, which is OK since
we do not want to waste the work that has been done, and page migration
has own checks for contention.  However, we do not want another isolation
attempt by either of the scanners, so cc->contended flag check is added
also to compaction_alloc() and compact_finished() to make sure compaction
is aborted right after the migration.

The outcome of the patch should be reduced lock contention by async
compaction and lower latencies for higher-order allocations where direct
compaction is involved.

[akpm@linux-foundation.org: fix typo in comment]
Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:11 -07:00
Vlastimil Babka e9ade56991 mm/compaction: avoid rescanning pageblocks in isolate_freepages
The compaction free scanner in isolate_freepages() currently remembers PFN
of the highest pageblock where it successfully isolates, to be used as the
starting pageblock for the next invocation.  The rationale behind this is
that page migration might return free pages to the allocator when
migration fails and we don't want to skip them if the compaction
continues.

Since migration now returns free pages back to compaction code where they
can be reused, this is no longer a concern.  This patch changes
isolate_freepages() so that the PFN for restarting is updated with each
pageblock where isolation is attempted.  Using stress-highalloc from
mmtests, this resulted in 10% reduction of the pages scanned by the free
scanner.

Note that the somewhat similar functionality that records highest
successful pageblock in zone->compact_cached_free_pfn, remains unchanged.
This cache is used when the whole compaction is restarted, not for
multiple invocations of the free scanner during single compaction.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:07 -07:00
Vlastimil Babka f8c9301fa5 mm/compaction: do not count migratepages when unnecessary
During compaction, update_nr_listpages() has been used to count remaining
non-migrated and free pages after a call to migrage_pages().  The
freepages counting has become unneccessary, and it turns out that
migratepages counting is also unnecessary in most cases.

The only situation when it's needed to count cc->migratepages is when
migrate_pages() returns with a negative error code.  Otherwise, the
non-negative return value is the number of pages that were not migrated,
which is exactly the count of remaining pages in the cc->migratepages
list.

Furthermore, any non-zero count is only interesting for the tracepoint of
mm_compaction_migratepages events, because after that all remaining
unmigrated pages are put back and their count is set to 0.

This patch therefore removes update_nr_listpages() completely, and changes
the tracepoint definition so that the manual counting is done only when
the tracepoint is enabled, and only when migrate_pages() returns a
negative error code.

Furthermore, migrate_pages() and the tracepoints won't be called when
there's nothing to migrate.  This potentially avoids some wasted cycles
and reduces the volume of uninteresting mm_compaction_migratepages events
where "nr_migrated=0 nr_failed=0".  In the stress-highalloc mmtest, this
was about 75% of the events.  The mm_compaction_isolate_migratepages event
is better for determining that nothing was isolated for migration, and
this one was just duplicating the info.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:07 -07:00
David Rientjes aeef4b8380 mm, compaction: terminate async compaction when rescheduling
Async compaction terminates prematurely when need_resched(), see
compact_checklock_irqsave().  This can never trigger, however, if the
cond_resched() in isolate_migratepages_range() always takes care of the
scheduling.

If the cond_resched() actually triggers, then terminate this pageblock
scan for async compaction as well.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:07 -07:00
David Rientjes e0b9daeb45 mm, compaction: embed migration mode in compact_control
We're going to want to manipulate the migration mode for compaction in the
page allocator, and currently compact_control's sync field is only a bool.

Currently, we only do MIGRATE_ASYNC or MIGRATE_SYNC_LIGHT compaction
depending on the value of this bool.  Convert the bool to enum
migrate_mode and pass the migration mode in directly.  Later, we'll want
to avoid MIGRATE_SYNC_LIGHT for thp allocations in the pagefault patch to
avoid unnecessary latency.

This also alters compaction triggered from sysfs, either for the entire
system or for a node, to force MIGRATE_SYNC.

[akpm@linux-foundation.org: fix build]
[iamjoonsoo.kim@lge.com: use MIGRATE_SYNC in alloc_contig_range()]
Signed-off-by: David Rientjes <rientjes@google.com>
Suggested-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:06 -07:00
David Rientjes 35979ef339 mm, compaction: add per-zone migration pfn cache for async compaction
Each zone has a cached migration scanner pfn for memory compaction so that
subsequent calls to memory compaction can start where the previous call
left off.

Currently, the compaction migration scanner only updates the per-zone
cached pfn when pageblocks were not skipped for async compaction.  This
creates a dependency on calling sync compaction to avoid having subsequent
calls to async compaction from scanning an enormous amount of non-MOVABLE
pageblocks each time it is called.  On large machines, this could be
potentially very expensive.

This patch adds a per-zone cached migration scanner pfn only for async
compaction.  It is updated everytime a pageblock has been scanned in its
entirety and when no pages from it were successfully isolated.  The cached
migration scanner pfn for sync compaction is updated only when called for
sync compaction.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:06 -07:00
David Rientjes d53aea3d46 mm, compaction: return failed migration target pages back to freelist
Greg reported that he found isolated free pages were returned back to the
VM rather than the compaction freelist.  This will cause holes behind the
free scanner and cause it to reallocate additional memory if necessary
later.

He detected the problem at runtime seeing that ext4 metadata pages (esp
the ones read by "sbi->s_group_desc[i] = sb_bread(sb, block)") were
constantly visited by compaction calls of migrate_pages().  These pages
had a non-zero b_count which caused fallback_migrate_page() ->
try_to_release_page() -> try_to_free_buffers() to fail.

Memory compaction works by having a "freeing scanner" scan from one end of
a zone which isolates pages as migration targets while another "migrating
scanner" scans from the other end of the same zone which isolates pages
for migration.

When page migration fails for an isolated page, the target page is
returned to the system rather than the freelist built by the freeing
scanner.  This may require the freeing scanner to continue scanning memory
after suitable migration targets have already been returned to the system
needlessly.

This patch returns destination pages to the freeing scanner freelist when
page migration fails.  This prevents unnecessary work done by the freeing
scanner but also encourages memory to be as compacted as possible at the
end of the zone.

Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Greg Thelen <gthelen@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:06 -07:00
David Rientjes 68711a7463 mm, migration: add destination page freeing callback
Memory migration uses a callback defined by the caller to determine how to
allocate destination pages.  When migration fails for a source page,
however, it frees the destination page back to the system.

This patch adds a memory migration callback defined by the caller to
determine how to free destination pages.  If a caller, such as memory
compaction, builds its own freelist for migration targets, this can reuse
already freed memory instead of scanning additional memory.

If the caller provides a function to handle freeing of destination pages,
it is called when page migration fails.  If the caller passes NULL then
freeing back to the system will be handled as usual.  This patch
introduces no functional change.

Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:06 -07:00
Vlastimil Babka c96b9e508f mm/compaction: cleanup isolate_freepages()
isolate_freepages() is currently somewhat hard to follow thanks to many
looks like it is related to the 'low_pfn' variable, but in fact it is not.

This patch renames the 'high_pfn' variable to a hopefully less confusing name,
and slightly changes its handling without a functional change. A comment made
obsolete by recent changes is also updated.

[akpm@linux-foundation.org: comment fixes, per Minchan]
[iamjoonsoo.kim@lge.com: cleanups]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dongjun Shin <d.j.shin@samsung.com>
Cc: Sunghwan Yun <sunghwan.yun@samsung.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:00 -07:00
Heesub Shin 13fb44e4b0 mm/compaction: clean up unused code lines
Remove code lines currently not in use or never called.

Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dongjun Shin <d.j.shin@samsung.com>
Cc: Sunghwan Yun <sunghwan.yun@samsung.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dongjun Shin <d.j.shin@samsung.com>
Cc: Sunghwan Yun <sunghwan.yun@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:00 -07:00
Vlastimil Babka 49e068f0b7 mm/compaction: make isolate_freepages start at pageblock boundary
The compaction freepage scanner implementation in isolate_freepages()
starts by taking the current cc->free_pfn value as the first pfn.  In a
for loop, it scans from this first pfn to the end of the pageblock, and
then subtracts pageblock_nr_pages from the first pfn to obtain the first
pfn for the next for loop iteration.

This means that when cc->free_pfn starts at offset X rather than being
aligned on pageblock boundary, the scanner will start at offset X in all
scanned pageblock, ignoring potentially many free pages.  Currently this
can happen when

 a) zone's end pfn is not pageblock aligned, or

 b) through zone->compact_cached_free_pfn with CONFIG_HOLES_IN_ZONE
    enabled and a hole spanning the beginning of a pageblock

This patch fixes the problem by aligning the initial pfn in
isolate_freepages() to pageblock boundary.  This also permits replacing
the end-of-pageblock alignment within the for loop with a simple
pageblock_nr_pages increment.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Heesub Shin <heesub.shin@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Dongjun Shin <d.j.shin@samsung.com>
Cc: Sunghwan Yun <sunghwan.yun@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06 13:04:59 -07:00
David Rientjes da1c67a76f mm, compaction: determine isolation mode only once
The conditions that control the isolation mode in
isolate_migratepages_range() do not change during the iteration, so
extract them out and only define the value once.

This actually does have an effect, gcc doesn't optimize it itself because
of cc->sync.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:55 -07:00
Joonsoo Kim b6c750163c mm/compaction: clean-up code on success of ballon isolation
It is just for clean-up to reduce code size and improve readability.
There is no functional change.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:51 -07:00
Joonsoo Kim c122b2087a mm/compaction: check pageblock suitability once per pageblock
isolation_suitable() and migrate_async_suitable() is used to be sure
that this pageblock range is fine to be migragted.  It isn't needed to
call it on every page.  Current code do well if not suitable, but, don't
do well when suitable.

1) It re-checks isolation_suitable() on each page of a pageblock that was
   already estabilished as suitable.
2) It re-checks migrate_async_suitable() on each page of a pageblock that
   was not entered through the next_pageblock: label, because
   last_pageblock_nr is not otherwise updated.

This patch fixes situation by 1) calling isolation_suitable() only once
per pageblock and 2) always updating last_pageblock_nr to the pageblock
that was just checked.

Additionally, move PageBuddy() check after pageblock unit check, since
pageblock check is the first thing we should do and makes things more
simple.

[vbabka@suse.cz: rephrase commit description]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:51 -07:00
Joonsoo Kim be1aa03b97 mm/compaction: change the timing to check to drop the spinlock
It is odd to drop the spinlock when we scan (SWAP_CLUSTER_MAX - 1) th
pfn page.  This may results in below situation while isolating
migratepage.

1. try isolate 0x0 ~ 0x200 pfn pages.
2. When low_pfn is 0x1ff, ((low_pfn+1) % SWAP_CLUSTER_MAX) == 0, so drop
   the spinlock.
3. Then, to complete isolating, retry to aquire the lock.

I think that it is better to use SWAP_CLUSTER_MAX th pfn for checking the
criteria about dropping the lock.  This has no harm 0x0 pfn, because, at
this time, locked variable would be false.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:51 -07:00
Joonsoo Kim 01ead5340b mm/compaction: do not call suitable_migration_target() on every page
suitable_migration_target() checks that pageblock is suitable for
migration target.  In isolate_freepages_block(), it is called on every
page and this is inefficient.  So make it called once per pageblock.

suitable_migration_target() also checks if page is highorder or not, but
it's criteria for highorder is pageblock order.  So calling it once
within pageblock range has no problem.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:51 -07:00
Joonsoo Kim 7d348b9ea6 mm/compaction: disallow high-order page for migration target
Purpose of compaction is to get a high order page.  Currently, if we
find high-order page while searching migration target page, we break it
to order-0 pages and use them as migration target.  It is contrary to
purpose of compaction, so disallow high-order page to be used for
migration target.

Additionally, clean-up logic in suitable_migration_target() to simplify
the code.  There is no functional changes from this clean-up.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:51 -07:00
Rashika Kheria 74e77fb9a2 mm/compaction.c: mark function as static
Mark function as static in compaction.c because it is not used outside
this file.

This eliminates the following warning from mm/compaction.c:

  mm/compaction.c:1190:9: warning: no previous prototype for `sysfs_compact_node' [-Wmissing-prototypes

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:02 -07:00
David Rientjes 119d6d59dc mm, compaction: avoid isolating pinned pages
Page migration will fail for memory that is pinned in memory with, for
example, get_user_pages().  In this case, it is unnecessary to take
zone->lru_lock or isolating the page and passing it to page migration
which will ultimately fail.

This is a racy check, the page can still change from under us, but in
that case we'll just fail later when attempting to move the page.

This avoids very expensive memory compaction when faulting transparent
hugepages after pinning a lot of memory with a Mellanox driver.

On a 128GB machine and pinning ~120GB of memory, before this patch we
see the enormous disparity in the number of page migration failures
because of the pinning (from /proc/vmstat):

	compact_pages_moved 8450
	compact_pagemigrate_failed 15614415

0.05% of pages isolated are successfully migrated and explicitly
triggering memory compaction takes 102 seconds.  After the patch:

	compact_pages_moved 9197
	compact_pagemigrate_failed 7

99.9% of pages isolated are now successfully migrated in this
configuration and memory compaction takes less than one second.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:01 -07:00
David Rientjes 91ca918648 mm, compaction: ignore pageblock skip when manually invoking compaction
The cached pageblock hint should be ignored when triggering compaction
through /proc/sys/vm/compact_memory so all eligible memory is isolated.
Manually invoking compaction is known to be expensive, there's no need
to skip pageblocks based on heuristics (mainly for debugging).

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:58 -07:00
Laura Abbott 2af120bc04 mm/compaction: break out of loop on !PageBuddy in isolate_freepages_block
We received several reports of bad page state when freeing CMA pages
previously allocated with alloc_contig_range:

    BUG: Bad page state in process Binder_A  pfn:63202
    page:d21130b0 count:0 mapcount:1 mapping:  (null) index:0x7dfbf
    page flags: 0x40080068(uptodate|lru|active|swapbacked)

Based on the page state, it looks like the page was still in use.  The
page flags do not make sense for the use case though.  Further debugging
showed that despite alloc_contig_range returning success, at least one
page in the range still remained in the buddy allocator.

There is an issue with isolate_freepages_block.  In strict mode (which
CMA uses), if any pages in the range cannot be isolated,
isolate_freepages_block should return failure 0.  The current check
keeps track of the total number of isolated pages and compares against
the size of the range:

        if (strict && nr_strict_required > total_isolated)
                total_isolated = 0;

After taking the zone lock, if one of the pages in the range is not in
the buddy allocator, we continue through the loop and do not increment
total_isolated.  If in the last iteration of the loop we isolate more
than one page (e.g.  last page needed is a higher order page), the check
for total_isolated may pass and we fail to detect that a page was
skipped.  The fix is to bail out if the loop immediately if we are in
strict mode.  There's no benfit to continuing anyway since we need all
pages to be isolated.  Additionally, drop the error checking based on
nr_strict_required and just check the pfn ranges.  This matches with
what isolate_freepages_range does.

Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-10 17:26:20 -07:00
Mel Gorman 6c14466cc0 mm: improve documentation of page_order
Developers occasionally try and optimise PFN scanners by using
page_order but miss that in general it requires zone->lock.  This has
happened twice for compaction.c and rejected both times.  This patch
clarifies the documentation of page_order and adds a note to
compaction.c why page_order is not used.

[akpm@linux-foundation.org: tweaks]
[lauraa@codeaurora.org: Corrected a page_zone(page)->lock reference]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:36:53 -08:00
Sasha Levin 309381feae mm: dump page when hitting a VM_BUG_ON using VM_BUG_ON_PAGE
Most of the VM_BUG_ON assertions are performed on a page.  Usually, when
one of these assertions fails we'll get a BUG_ON with a call stack and
the registers.

I've recently noticed based on the requests to add a small piece of code
that dumps the page to various VM_BUG_ON sites that the page dump is
quite useful to people debugging issues in mm.

This patch adds a VM_BUG_ON_PAGE(cond, page) which beyond doing what
VM_BUG_ON() does, also dumps the page before executing the actual
BUG_ON.

[akpm@linux-foundation.org: fix up includes]
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:36:50 -08:00
Vlastimil Babka 55b7c4c99f mm: compaction: reset scanner positions immediately when they meet
Compaction used to start its migrate and free page scaners at the zone's
lowest and highest pfn, respectively.  Later, caching was introduced to
remember the scanners' progress across compaction attempts so that
pageblocks are not re-scanned uselessly.  Additionally, pageblocks where
isolation failed are marked to be quickly skipped when encountered again
in future compactions.

Currently, both the reset of cached pfn's and clearing of the pageblock
skip information for a zone is done in __reset_isolation_suitable().
This function gets called when:

 - compaction is restarting after being deferred
 - compact_blockskip_flush flag is set in compact_finished() when the scanners
   meet (and not again cleared when direct compaction succeeds in allocation)
   and kswapd acts upon this flag before going to sleep

This behavior is suboptimal for several reasons:

 - when direct sync compaction is called after async compaction fails (in the
   allocation slowpath), it will effectively do nothing, unless kswapd
   happens to process the compact_blockskip_flush flag meanwhile. This is racy
   and goes against the purpose of sync compaction to more thoroughly retry
   the compaction of a zone where async compaction has failed.
   The restart-after-deferring path cannot help here as deferring happens only
   after the sync compaction fails. It is also done only for the preferred
   zone, while the compaction might be done for a fallback zone.

 - the mechanism of marking pageblock to be skipped has little value since the
   cached pfn's are reset only together with the pageblock skip flags. This
   effectively limits pageblock skip usage to parallel compactions.

This patch changes compact_finished() so that cached pfn's are reset
immediately when the scanners meet.  Clearing pageblock skip flags is
unchanged, as well as the other situations where cached pfn's are reset.
This allows the sync-after-async compaction to retry pageblocks not
marked as skipped, such as blocks !MIGRATE_MOVABLE blocks that async
compactions now skips without marking them.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:49 -08:00
Vlastimil Babka 50b5b094e6 mm: compaction: do not mark unmovable pageblocks as skipped in async compaction
Compaction temporarily marks pageblocks where it fails to isolate pages
as to-be-skipped in further compactions, in order to improve efficiency.
One of the reasons to fail isolating pages is that isolation is not
attempted in pageblocks that are not of MIGRATE_MOVABLE (or CMA) type.

The problem is that blocks skipped due to not being MIGRATE_MOVABLE in
async compaction become skipped due to the temporary mark also in future
sync compaction.  Moreover, this may follow quite soon during
__alloc_page_slowpath, without much time for kswapd to clear the
pageblock skip marks.  This goes against the idea that sync compaction
should try to scan these blocks more thoroughly than the async
compaction.

The fix is to ensure in async compaction that these !MIGRATE_MOVABLE
blocks are not marked to be skipped.  Note this should not affect
performance or locking impact of further async compactions, as skipping
a block due to being !MIGRATE_MOVABLE is done soon after skipping a
block marked to be skipped, both without locking.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Vlastimil Babka 7ed695e069 mm: compaction: detect when scanners meet in isolate_freepages
Compaction of a zone is finished when the migrate scanner (which begins
at the zone's lowest pfn) meets the free page scanner (which begins at
the zone's highest pfn).  This is detected in compact_zone() and in the
case of direct compaction, the compact_blockskip_flush flag is set so
that kswapd later resets the cached scanner pfn's, and a new compaction
may again start at the zone's borders.

The meeting of the scanners can happen during either scanner's activity.
However, it may currently fail to be detected when it occurs in the free
page scanner, due to two problems.  First, isolate_freepages() keeps
free_pfn at the highest block where it isolated pages from, for the
purposes of not missing the pages that are returned back to allocator
when migration fails.  Second, failing to isolate enough free pages due
to scanners meeting results in -ENOMEM being returned by
migrate_pages(), which makes compact_zone() bail out immediately without
calling compact_finished() that would detect scanners meeting.

This failure to detect scanners meeting might result in repeated
attempts at compaction of a zone that keep starting from the cached
pfn's close to the meeting point, and quickly failing through the
-ENOMEM path, without the cached pfns being reset, over and over.  This
has been observed (through additional tracepoints) in the third phase of
the mmtests stress-highalloc benchmark, where the allocator runs on an
otherwise idle system.  The problem was observed in the DMA32 zone,
which was used as a fallback to the preferred Normal zone, but on the
4GB system it was actually the largest zone.  The problem is even
amplified for such fallback zone - the deferred compaction logic, which
could (after being fixed by a previous patch) reset the cached scanner
pfn's, is only applied to the preferred zone and not for the fallbacks.

The problem in the third phase of the benchmark was further amplified by
commit 81c0a2bb51 ("mm: page_alloc: fair zone allocator policy") which
resulted in a non-deterministic regression of the allocation success
rate from ~85% to ~65%.  This occurs in about half of benchmark runs,
making bisection problematic.  It is unlikely that the commit itself is
buggy, but it should put more pressure on the DMA32 zone during phases 1
and 2, which may leave it more fragmented in phase 3 and expose the bugs
that this patch fixes.

The fix is to make scanners meeting in isolate_freepage() stay that way,
and to check in compact_zone() for scanners meeting when migrate_pages()
returns -ENOMEM.  The result is that compact_finished() also detects
scanners meeting and sets the compact_blockskip_flush flag to make
kswapd reset the scanner pfn's.

The results in stress-highalloc benchmark show that the "regression" by
commit 81c0a2bb51 in phase 3 no longer occurs, and phase 1 and 2
allocation success rates are also significantly improved.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Vlastimil Babka d3132e4b83 mm: compaction: reset cached scanner pfn's before reading them
Compaction caches pfn's for its migrate and free scanners to avoid
scanning the whole zone each time.  In compact_zone(), the cached values
are read to set up initial values for the scanners.  There are several
situations when these cached pfn's are reset to the first and last pfn
of the zone, respectively.  One of these situations is when a compaction
has been deferred for a zone and is now being restarted during a direct
compaction, which is also done in compact_zone().

However, compact_zone() currently reads the cached pfn's *before*
resetting them.  This means the reset doesn't affect the compaction that
performs it, and with good chance also subsequent compactions, as
update_pageblock_skip() is likely to be called and update the cached
pfn's to those being processed.  Another chance for a successful reset
is when a direct compaction detects that migration and free scanners
meet (which has its own problems addressed by another patch) and sets
update_pageblock_skip flag which kswapd uses to do the reset because it
goes to sleep.

This is clearly a bug that results in non-deterministic behavior, so
this patch moves the cached pfn reset to be performed *before* the
values are read.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Vlastimil Babka de6c60a6c1 mm: compaction: encapsulate defer reset logic
Currently there are several functions to manipulate the deferred
compaction state variables.  The remaining case where the variables are
touched directly is when a successful allocation occurs in direct
compaction, or is expected to be successful in the future by kswapd.
Here, the lowest order that is expected to fail is updated, and in the
case of successful allocation, the deferred status and counter is reset
completely.

Create a new function compaction_defer_reset() to encapsulate this
functionality and make it easier to understand the code.  No functional
change.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Mel Gorman 0eb927c0ab mm: compaction: trace compaction begin and end
The broad goal of the series is to improve allocation success rates for
huge pages through memory compaction, while trying not to increase the
compaction overhead.  The original objective was to reintroduce
capturing of high-order pages freed by the compaction, before they are
split by concurrent activity.  However, several bugs and opportunities
for simple improvements were found in the current implementation, mostly
through extra tracepoints (which are however too ugly for now to be
considered for sending).

The patches mostly deal with two mechanisms that reduce compaction
overhead, which is caching the progress of migrate and free scanners,
and marking pageblocks where isolation failed to be skipped during
further scans.

Patch 1 (from mgorman) adds tracepoints that allow calculate time spent in
        compaction and potentially debug scanner pfn values.

Patch 2 encapsulates the some functionality for handling deferred compactions
        for better maintainability, without a functional change
        type is not determined without being actually needed.

Patch 3 fixes a bug where cached scanner pfn's are sometimes reset only after
        they have been read to initialize a compaction run.

Patch 4 fixes a bug where scanners meeting is sometimes not properly detected
        and can lead to multiple compaction attempts quitting early without
        doing any work.

Patch 5 improves the chances of sync compaction to process pageblocks that
        async compaction has skipped due to being !MIGRATE_MOVABLE.

Patch 6 improves the chances of sync direct compaction to actually do anything
        when called after async compaction fails during allocation slowpath.

The impact of patches were validated using mmtests's stress-highalloc
benchmark with mmtests's stress-highalloc benchmark on a x86_64 machine
with 4GB memory.

Due to instability of the results (mostly related to the bugs fixed by
patches 2 and 3), 10 iterations were performed, taking min,mean,max
values for success rates and mean values for time and vmstat-based
metrics.

First, the default GFP_HIGHUSER_MOVABLE allocations were tested with the
patches stacked on top of v3.13-rc2.  Patch 2 is OK to serve as baseline
due to no functional changes in 1 and 2.  Comments below.

stress-highalloc
                             3.13-rc2              3.13-rc2              3.13-rc2              3.13-rc2              3.13-rc2
                              2-nothp               3-nothp               4-nothp               5-nothp               6-nothp
Success 1 Min          9.00 (  0.00%)       10.00 (-11.11%)       43.00 (-377.78%)       43.00 (-377.78%)       33.00 (-266.67%)
Success 1 Mean        27.50 (  0.00%)       25.30 (  8.00%)       45.50 (-65.45%)       45.90 (-66.91%)       46.30 (-68.36%)
Success 1 Max         36.00 (  0.00%)       36.00 (  0.00%)       47.00 (-30.56%)       48.00 (-33.33%)       52.00 (-44.44%)
Success 2 Min         10.00 (  0.00%)        8.00 ( 20.00%)       46.00 (-360.00%)       45.00 (-350.00%)       35.00 (-250.00%)
Success 2 Mean        26.40 (  0.00%)       23.50 ( 10.98%)       47.30 (-79.17%)       47.60 (-80.30%)       48.10 (-82.20%)
Success 2 Max         34.00 (  0.00%)       33.00 (  2.94%)       48.00 (-41.18%)       50.00 (-47.06%)       54.00 (-58.82%)
Success 3 Min         65.00 (  0.00%)       63.00 (  3.08%)       85.00 (-30.77%)       84.00 (-29.23%)       85.00 (-30.77%)
Success 3 Mean        76.70 (  0.00%)       70.50 (  8.08%)       86.20 (-12.39%)       85.50 (-11.47%)       86.00 (-12.13%)
Success 3 Max         87.00 (  0.00%)       86.00 (  1.15%)       88.00 ( -1.15%)       87.00 (  0.00%)       87.00 (  0.00%)

            3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2
             2-nothp     3-nothp     4-nothp     5-nothp     6-nothp
User         6437.72     6459.76     5960.32     5974.55     6019.67
System       1049.65     1049.09     1029.32     1031.47     1032.31
Elapsed      1856.77     1874.48     1949.97     1994.22     1983.15

                              3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2
                               2-nothp     3-nothp     4-nothp     5-nothp     6-nothp
Minor Faults                 253952267   254581900   250030122   250507333   250157829
Major Faults                       420         407         506         530         530
Swap Ins                             4           9           9           6           6
Swap Outs                          398         375         345         346         333
Direct pages scanned            197538      189017      298574      287019      299063
Kswapd pages scanned           1809843     1801308     1846674     1873184     1861089
Kswapd pages reclaimed         1806972     1798684     1844219     1870509     1858622
Direct pages reclaimed          197227      188829      298380      286822      298835
Kswapd efficiency                  99%         99%         99%         99%         99%
Kswapd velocity                953.382     970.449     952.243     934.569     922.286
Direct efficiency                  99%         99%         99%         99%         99%
Direct velocity                104.058     101.832     153.961     143.200     148.205
Percentage direct scans             9%          9%         13%         13%         13%
Zone normal velocity           347.289     359.676     348.063     339.933     332.983
Zone dma32 velocity            710.151     712.605     758.140     737.835     737.507
Zone dma velocity                0.000       0.000       0.000       0.000       0.000
Page writes by reclaim         557.600     429.000     353.600     426.400     381.800
Page writes file                   159          53           7          79          48
Page writes anon                   398         375         345         346         333
Page reclaim immediate             825         644         411         575         420
Sector Reads                   2781750     2769780     2878547     2939128     2910483
Sector Writes                 12080843    12083351    12012892    12002132    12010745
Page rescued immediate               0           0           0           0           0
Slabs scanned                  1575654     1545344     1778406     1786700     1794073
Direct inode steals               9657       10037       15795       14104       14645
Kswapd inode steals              46857       46335       50543       50716       51796
Kswapd skipped wait                  0           0           0           0           0
THP fault alloc                     97          91          81          71          77
THP collapse alloc                 456         506         546         544         565
THP splits                           6           5           5           4           4
THP fault fallback                   0           1           0           0           0
THP collapse fail                   14          14          12          13          12
Compaction stalls                 1006         980        1537        1536        1548
Compaction success                 303         284         562         559         578
Compaction failures                702         696         974         976         969
Page migrate success           1177325     1070077     3927538     3781870     3877057
Page migrate failure                 0           0           0           0           0
Compaction pages isolated      2547248     2306457     8301218     8008500     8200674
Compaction migrate scanned    42290478    38832618   153961130   154143900   159141197
Compaction free scanned       89199429    79189151   356529027   351943166   356326727
Compaction cost                   1566        1426        5312        5156        5294
NUMA PTE updates                     0           0           0           0           0
NUMA hint faults                     0           0           0           0           0
NUMA hint local faults               0           0           0           0           0
NUMA hint local percent            100         100         100         100         100
NUMA pages migrated                  0           0           0           0           0
AutoNUMA cost                        0           0           0           0           0

Observations:

- The "Success 3" line is allocation success rate with system idle
  (phases 1 and 2 are with background interference).  I used to get stable
  values around 85% with vanilla 3.11.  The lower min and mean values came
  with 3.12.  This was bisected to commit 81c0a2bb ("mm: page_alloc: fair
  zone allocator policy") As explained in comment for patch 3, I don't
  think the commit is wrong, but that it makes the effect of compaction
  bugs worse.  From patch 3 onwards, the results are OK and match the 3.11
  results.

- Patch 4 also clearly helps phases 1 and 2, and exceeds any results
  I've seen with 3.11 (I didn't measure it that thoroughly then, but it
  was never above 40%).

- Compaction cost and number of scanned pages is higher, especially due
  to patch 4.  However, keep in mind that patches 3 and 4 fix existing
  bugs in the current design of compaction overhead mitigation, they do
  not change it.  If overhead is found unacceptable, then it should be
  decreased differently (and consistently, not due to random conditions)
  than the current implementation does.  In contrast, patches 5 and 6
  (which are not strictly bug fixes) do not increase the overhead (but
  also not success rates).  This might be a limitation of the
  stress-highalloc benchmark as it's quite uniform.

Another set of results is when configuring stress-highalloc t allocate
with similar flags as THP uses:
 (GFP_HIGHUSER_MOVABLE|__GFP_NOMEMALLOC|__GFP_NORETRY|__GFP_NO_KSWAPD)

stress-highalloc
                             3.13-rc2              3.13-rc2              3.13-rc2              3.13-rc2              3.13-rc2
                                2-thp                 3-thp                 4-thp                 5-thp                 6-thp
Success 1 Min          2.00 (  0.00%)        7.00 (-250.00%)       18.00 (-800.00%)       19.00 (-850.00%)       26.00 (-1200.00%)
Success 1 Mean        19.20 (  0.00%)       17.80 (  7.29%)       29.20 (-52.08%)       29.90 (-55.73%)       32.80 (-70.83%)
Success 1 Max         27.00 (  0.00%)       29.00 ( -7.41%)       35.00 (-29.63%)       36.00 (-33.33%)       37.00 (-37.04%)
Success 2 Min          3.00 (  0.00%)        8.00 (-166.67%)       21.00 (-600.00%)       21.00 (-600.00%)       32.00 (-966.67%)
Success 2 Mean        19.30 (  0.00%)       17.90 (  7.25%)       32.20 (-66.84%)       32.60 (-68.91%)       35.70 (-84.97%)
Success 2 Max         27.00 (  0.00%)       30.00 (-11.11%)       36.00 (-33.33%)       37.00 (-37.04%)       39.00 (-44.44%)
Success 3 Min         62.00 (  0.00%)       62.00 (  0.00%)       85.00 (-37.10%)       75.00 (-20.97%)       64.00 ( -3.23%)
Success 3 Mean        66.30 (  0.00%)       65.50 (  1.21%)       85.60 (-29.11%)       83.40 (-25.79%)       83.50 (-25.94%)
Success 3 Max         70.00 (  0.00%)       69.00 (  1.43%)       87.00 (-24.29%)       86.00 (-22.86%)       87.00 (-24.29%)

            3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2
               2-thp       3-thp       4-thp       5-thp       6-thp
User         6547.93     6475.85     6265.54     6289.46     6189.96
System       1053.42     1047.28     1043.23     1042.73     1038.73
Elapsed      1835.43     1821.96     1908.67     1912.74     1956.38

                              3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2
                                 2-thp       3-thp       4-thp       5-thp       6-thp
Minor Faults                 256805673   253106328   253222299   249830289   251184418
Major Faults                       395         375         423         434         448
Swap Ins                            12          10          10          12           9
Swap Outs                          530         537         487         455         415
Direct pages scanned             71859       86046      153244      152764      190713
Kswapd pages scanned           1900994     1870240     1898012     1892864     1880520
Kswapd pages reclaimed         1897814     1867428     1894939     1890125     1877924
Direct pages reclaimed           71766       85908      153167      152643      190600
Kswapd efficiency                  99%         99%         99%         99%         99%
Kswapd velocity               1029.000    1067.782    1000.091     991.049     951.218
Direct efficiency                  99%         99%         99%         99%         99%
Direct velocity                 38.897      49.127      80.747      79.983      96.468
Percentage direct scans             3%          4%          7%          7%          9%
Zone normal velocity           351.377     372.494     348.910     341.689     335.310
Zone dma32 velocity            716.520     744.414     731.928     729.343     712.377
Zone dma velocity                0.000       0.000       0.000       0.000       0.000
Page writes by reclaim         669.300     604.000     545.700     538.900     429.900
Page writes file                   138          66          58          83          14
Page writes anon                   530         537         487         455         415
Page reclaim immediate             806         655         772         548         517
Sector Reads                   2711956     2703239     2811602     2818248     2839459
Sector Writes                 12163238    12018662    12038248    11954736    11994892
Page rescued immediate               0           0           0           0           0
Slabs scanned                  1385088     1388364     1507968     1513292     1558656
Direct inode steals               1739        2564        4622        5496        6007
Kswapd inode steals              47461       46406       47804       48013       48466
Kswapd skipped wait                  0           0           0           0           0
THP fault alloc                    110          82          84          69          70
THP collapse alloc                 445         482         467         462         539
THP splits                           6           5           4           5           3
THP fault fallback                   3           0           0           0           0
THP collapse fail                   15          14          14          14          13
Compaction stalls                  659         685        1033        1073        1111
Compaction success                 222         225         410         427         456
Compaction failures                436         460         622         646         655
Page migrate success            446594      439978     1085640     1095062     1131716
Page migrate failure                 0           0           0           0           0
Compaction pages isolated      1029475     1013490     2453074     2482698     2565400
Compaction migrate scanned     9955461    11344259    24375202    27978356    30494204
Compaction free scanned       27715272    28544654    80150615    82898631    85756132
Compaction cost                    552         555        1344        1379        1436
NUMA PTE updates                     0           0           0           0           0
NUMA hint faults                     0           0           0           0           0
NUMA hint local faults               0           0           0           0           0
NUMA hint local percent            100         100         100         100         100
NUMA pages migrated                  0           0           0           0           0
AutoNUMA cost                        0           0           0           0           0

There are some differences from the previous results for THP-like allocations:

- Here, the bad result for unpatched kernel in phase 3 is much more
  consistent to be between 65-70% and not related to the "regression" in
  3.12.  Still there is the improvement from patch 4 onwards, which brings
  it on par with simple GFP_HIGHUSER_MOVABLE allocations.

- Compaction costs have increased, but nowhere near as much as the
  non-THP case.  Again, the patches should be worth the gained
  determininsm.

- Patches 5 and 6 somewhat increase the number of migrate-scanned pages.
   This is most likely due to __GFP_NO_KSWAPD flag, which means the cached
  pfn's and pageblock skip bits are not reset by kswapd that often (at
  least in phase 3 where no concurrent activity would wake up kswapd) and
  the patches thus help the sync-after-async compaction.  It doesn't
  however show that the sync compaction would help so much with success
  rates, which can be again seen as a limitation of the benchmark
  scenario.

This patch (of 6):

Add two tracepoints for compaction begin and end of a zone.  Using this it
is possible to calculate how much time a workload is spending within
compaction and potentially debug problems related to cached pfns for
scanning.  In combination with the direct reclaim and slab trace points it
should be possible to estimate most allocation-related overhead for a
workload.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Joonsoo Kim 6815bf3f23 mm/compaction: respect ignore_skip_hint in update_pageblock_skip
update_pageblock_skip() only fits to compaction which tries to isolate
by pageblock unit.  If isolate_migratepages_range() is called by CMA, it
try to isolate regardless of pageblock unit and it don't reference
get_pageblock_skip() by ignore_skip_hint.  We should also respect it on
update_pageblock_skip() to prevent from setting the wrong information.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: <stable@vger.kernel.org>	[3.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-18 19:04:52 -08:00
Jerome Marchand 9e4be4708e mm/compaction.c: update comment about zone lock in isolate_freepages_block
Since commit f40d1e42bb ("mm: compaction: acquire the zone->lock as
late as possible"), isolate_freepages_block() takes the zone->lock
itself.  The function description however still states that the
zone->lock must be held.

This patch removes this outdated statement.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:03 +09:00
David Rientjes f6ea3adb70 mm/compaction.c: periodically schedule when freeing pages
We've been getting warnings about an excessive amount of time spent
allocating pages for migration during memory compaction without
scheduling.  isolate_freepages_block() already periodically checks for
contended locks or the need to schedule, but isolate_freepages() never
does.

When a zone is massively long and no suitable targets can be found, this
iteration can be quite expensive without ever doing cond_resched().

Check periodically for the need to reschedule while the compaction free
scanner iterates.

Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-30 14:31:01 -07:00
Mel Gorman 3a7200af3d mm: compaction: do not compact pgdat for order-0
If kswapd was reclaiming for a high order and resets it to 0 due to
fragmentation it will still call compact_pgdat.  For the most part, this
will fail a compaction_suitable() test and not compact but it is
unnecessarily sloppy.  It could be fixed in the caller but fix it in the
API instead.

[dhillf@gmail.com: pointed out that it was a potential problem]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Hillf Danton <dhillf@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:57:55 -07:00
Cody P Schafer 108bcc96ef mm: add & use zone_end_pfn() and zone_spans_pfn()
Add 2 helpers (zone_end_pfn() and zone_spans_pfn()) to reduce code
duplication.

This also switches to using them in compaction (where an additional
variable needed to be renamed), page_alloc, vmstat, memory_hotplug, and
kmemleak.

Note that in compaction.c I avoid calling zone_end_pfn() repeatedly
because I expect at some point the sycronization issues with start_pfn &
spanned_pages will need fixing, either by actually using the seqlock or
clever memory barrier usage.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:20 -08:00
Hugh Dickins 9c620e2bc5 mm: remove offlining arg to migrate_pages
No functional change, but the only purpose of the offlining argument to
migrate_pages() etc, was to ensure that __unmap_and_move() could migrate a
KSM page for memory hotremove (which took ksm_thread_mutex) but not for
other callers.  Now all cases are safe, remove the arg.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Izik Eidus <izik.eidus@ravellosystems.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:19 -08:00
Minchan Kim 194159fbcc mm: remove MIGRATE_ISOLATE check in hotpath
Several functions test MIGRATE_ISOLATE and some of those are hotpath but
MIGRATE_ISOLATE is used only if we enable CONFIG_MEMORY_ISOLATION(ie,
CMA, memory-hotplug and memory-failure) which are not common config
option.  So let's not add unnecessary overhead and code when we don't
enable CONFIG_MEMORY_ISOLATION.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:15 -08:00