Граф коммитов

546 Коммитов

Автор SHA1 Сообщение Дата
Avi Kivity a1f4d39500 KVM: Remove memory alias support
As advertised in feature-removal-schedule.txt.  Equivalent support is provided
by overlapping memory regions.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:00 +03:00
Avi Kivity d1ac91d8a2 KVM: Consolidate load/save temporary buffer allocation and freeing
Instead of three temporary variables and three free calls, have one temporary
variable (with four names) and one free call.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:57 +03:00
Avi Kivity a1a005f36e KVM: Fix xsave and xcr save/restore memory leak
We allocate temporary kernel buffers for these structures, but never free them.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:56 +03:00
Sheng Yang 2d5b5a6655 KVM: x86: XSAVE/XRSTOR live migration support
This patch enable save/restore of xsave state.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:37 +03:00
Avi Kivity 2390218b6a KVM: Fix mov cr3 #GP at wrong instruction
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.

Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:35 +03:00
Avi Kivity a83b29c6ad KVM: Fix mov cr4 #GP at wrong instruction
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.

Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:34 +03:00
Avi Kivity 49a9b07edc KVM: Fix mov cr0 #GP at wrong instruction
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.

Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:32 +03:00
Dexuan Cui 2acf923e38 KVM: VMX: Enable XSAVE/XRSTOR for guest
This patch enable guest to use XSAVE/XRSTOR instructions.

We assume that host_xcr0 would use all possible bits that OS supported.

And we loaded xcr0 in the same way we handled fpu - do it as late as we can.

Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:31 +03:00
Lai Jiangshan 7bee342a9e KVM: x86: use linux/uaccess.h instead of asm/uaccess.h
Should use linux/uaccess.h instead of asm/uaccess.h

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:39:25 +03:00
Jan Kiszka 10ab25cd6b KVM: x86: Propagate fpu_alloc errors
Memory allocation may fail. Propagate such errors.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:39:22 +03:00
Avi Kivity 221d059d15 KVM: Update Red Hat copyrights
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:51 +03:00
Sheng Yang 98918833a3 KVM: x86: Use FPU API
Convert KVM to use generic FPU API.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:49 +03:00
Sheng Yang 7cf30855e0 KVM: x86: Use unlazy_fpu() for host FPU
We can avoid unnecessary fpu load when userspace process
didn't use FPU frequently.

Derived from Avi's idea.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:48 +03:00
Avi Kivity 9373662463 KVM: Consolidate arch specific vcpu ioctl locking
Now that all arch specific ioctls have centralized locking, it is easy to
move it to the central dispatcher.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:48 +03:00
Avi Kivity 526b78ad1a KVM: x86: Lock arch specific vcpu ioctls centrally
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:47 +03:00
Avi Kivity 2122ff5eab KVM: move vcpu locking to dispatcher for generic vcpu ioctls
All vcpu ioctls need to be locked, so instead of locking each one specifically
we lock at the generic dispatcher.

This patch only updates generic ioctls and leaves arch specific ioctls alone.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:47 +03:00
Xiao Guangrong 1683b2416e KVM: x86: cleanup unused local variable
fix:
 arch/x86/kvm/x86.c: In function ‘handle_emulation_failure’:
 arch/x86/kvm/x86.c:3844: warning: unused variable ‘ctxt’

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:35:46 +03:00
Sheng Yang aad827034e KVM: VMX: Only reset MMU when necessary
Only modifying some bits of CR0/CR4 needs paging mode switch.

Modify EFER.NXE bit would result in reserved bit updates.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:35:45 +03:00
Sheng Yang 62ad07551a KVM: x86: Clean up duplicate assignment
mmu.free() already set root_hpa to INVALID_PAGE, no need to do it again in the
destory_kvm_mmu().

kvm_x86_ops->set_cr4() and set_efer() already assign cr4/efer to
vcpu->arch.cr4/efer, no need to do it again later.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:35:44 +03:00
Gleb Natapov 6d77dbfc88 KVM: inject #UD if instruction emulation fails and exit to userspace
Do not kill VM when instruction emulation fails. Inject #UD and report
failure to userspace instead. Userspace may choose to reenter guest if
vcpu is in userspace (cpl == 3) in which case guest OS will kill
offending process and continue running.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:35:40 +03:00
Avi Kivity d94e1dc9af KVM: Get rid of KVM_REQ_KICK
KVM_REQ_KICK poisons vcpu->requests by having a bit set during normal
operation.  This causes the fast path check for a clear vcpu->requests
to fail all the time, triggering tons of atomic operations.

Fix by replacing KVM_REQ_KICK with a vcpu->guest_mode atomic.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:37 +03:00
Gleb Natapov 54b8486f46 KVM: x86 emulator: do not inject exception directly into vcpu
Return exception as a result of instruction emulation and handle
injection in KVM code.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:37 +03:00
Gleb Natapov 95cb229530 KVM: x86 emulator: move interruptibility state tracking out of emulator
Emulator shouldn't access vcpu directly.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:36 +03:00
Gleb Natapov 4d2179e1e9 KVM: x86 emulator: handle shadowed registers outside emulator
Emulator shouldn't access vcpu directly.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:36 +03:00
Gleb Natapov ef050dc039 KVM: x86 emulator: set RFLAGS outside x86 emulator code
Removes the need for set_flags() callback.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:35 +03:00
Gleb Natapov 95c5588652 KVM: x86 emulator: advance RIP outside x86 emulator code
Return new RIP as part of instruction emulation result instead of
updating KVM's RIP from x86 emulator code.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:35 +03:00
Gleb Natapov 3457e4192e KVM: handle emulation failure case first
If emulation failed return immediately.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:34 +03:00
Gleb Natapov 8fe681e984 KVM: do not inject #PF in (read|write)_emulated() callbacks
Return error to x86 emulator instead of injection exception behind its back.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:34 +03:00
Gleb Natapov f181b96d4c KVM: remove export of emulator_write_emulated()
It is not called directly outside of the file it's defined in anymore.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:34 +03:00
Gleb Natapov c3cd7ffaf5 KVM: x86 emulator: x86_emulate_insn() return -1 only in case of emulation failure
Currently emulator returns -1 when emulation failed or IO is needed.
Caller tries to guess whether emulation failed by looking at other
variables. Make it easier for caller to recognise error condition by
always returning -1 in case of failure. For this new emulator
internal return value X86EMUL_IO_NEEDED is introduced. It is used to
distinguish between error condition (which returns X86EMUL_UNHANDLEABLE)
and condition that requires IO exit to userspace to continue emulation.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:33 +03:00
Gleb Natapov 411c35b7ef KVM: fill in run->mmio details in (read|write)_emulated function
Fill in run->mmio details in (read|write)_emulated function just like
pio does. There is no point in filling only vcpu fields there just to
copy them into vcpu->run a little bit later.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:33 +03:00
Gleb Natapov 338dbc9781 KVM: x86 emulator: make (get|set)_dr() callback return error if it fails
Make (get|set)_dr() callback return error if it fails instead of
injecting exception behind emulator's back.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:32 +03:00
Gleb Natapov 0f12244fe7 KVM: x86 emulator: make set_cr() callback return error if it fails
Make set_cr() callback return error if it fails instead of injecting #GP
behind emulator's back.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:31 +03:00
Gleb Natapov 5951c44237 KVM: x86 emulator: add get_cached_segment_base() callback to x86_emulate_ops
On VMX it is expensive to call get_cached_descriptor() just to get segment
base since multiple vmcs_reads are done instead of only one. Introduce
new call back get_cached_segment_base() for efficiency.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:31 +03:00
Gleb Natapov 3fb1b5dbd3 KVM: x86 emulator: add (set|get)_msr callbacks to x86_emulate_ops
Add (set|get)_msr callbacks to x86_emulate_ops instead of calling
them directly.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:30 +03:00
Gleb Natapov 35aa5375d4 KVM: x86 emulator: add (set|get)_dr callbacks to x86_emulate_ops
Add (set|get)_dr callbacks to x86_emulate_ops instead of calling
them directly.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:30 +03:00
Avi Kivity 1c11e71357 KVM: VMX: Avoid writing HOST_CR0 every entry
cr0.ts may change between entries, so we copy cr0 to HOST_CR0 before each
entry.  That is slow, so instead, set HOST_CR0 to have TS set unconditionally
(which is a safe value), and issue a clts() just before exiting vcpu context
if the task indeed owns the fpu.

Saves ~50 cycles/exit.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:28 +03:00
Takuya Yoshikawa 914ebccd2d KVM: x86: avoid unnecessary bitmap allocation when memslot is clean
Although we always allocate a new dirty bitmap in x86's get_dirty_log(),
it is only used as a zero-source of copy_to_user() and freed right after
that when memslot is clean. This patch uses clear_user() instead of doing
this unnecessary zero-source allocation.

Performance improvement: as we can expect easily, the time needed to
allocate a bitmap is completely reduced. In my test, the improved ioctl
was about 4 to 10 times faster than the original one for clean slots.
Furthermore, reducing memory allocations and copies will produce good
effects to caches too.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:27 +03:00
H. Peter Anvin d3608b5681 Merge remote branch 'origin/x86/urgent' into x86/asm 2010-07-27 23:28:28 -07:00
Avi Kivity 7a73c0283d KVM: Use kmalloc() instead of vmalloc() for KVM_[GS]ET_MSR
We don't need more than a page, and vmalloc() is slower (much
slower recently due to a regression).

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-07-23 09:07:14 +03:00
Brian Gerst 8c06585d64 x86: Remove redundant K6 MSRs
MSR_K6_EFER is unused, and MSR_K6_STAR is redundant with MSR_STAR.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1279371808-24804-1-git-send-email-brgerst@gmail.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-07-21 21:23:05 -07:00
Linus Torvalds 98edb6ca41 Merge branch 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (269 commits)
  KVM: x86: Add missing locking to arch specific vcpu ioctls
  KVM: PPC: Add missing vcpu_load()/vcpu_put() in vcpu ioctls
  KVM: MMU: Segregate shadow pages with different cr0.wp
  KVM: x86: Check LMA bit before set_efer
  KVM: Don't allow lmsw to clear cr0.pe
  KVM: Add cpuid.txt file
  KVM: x86: Tell the guest we'll warn it about tsc stability
  x86, paravirt: don't compute pvclock adjustments if we trust the tsc
  x86: KVM guest: Try using new kvm clock msrs
  KVM: x86: export paravirtual cpuid flags in KVM_GET_SUPPORTED_CPUID
  KVM: x86: add new KVMCLOCK cpuid feature
  KVM: x86: change msr numbers for kvmclock
  x86, paravirt: Add a global synchronization point for pvclock
  x86, paravirt: Enable pvclock flags in vcpu_time_info structure
  KVM: x86: Inject #GP with the right rip on efer writes
  KVM: SVM: Don't allow nested guest to VMMCALL into host
  KVM: x86: Fix exception reinjection forced to true
  KVM: Fix wallclock version writing race
  KVM: MMU: Don't read pdptrs with mmu spinlock held in mmu_alloc_roots
  KVM: VMX: enable VMXON check with SMX enabled (Intel TXT)
  ...
2010-05-21 17:16:21 -07:00
Avi Kivity 8fbf065d62 KVM: x86: Add missing locking to arch specific vcpu ioctls
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:41:11 +03:00
Sheng Yang a3d204e285 KVM: x86: Check LMA bit before set_efer
kvm_x86_ops->set_efer() would execute vcpu->arch.efer = efer, so the
checking of LMA bit didn't work.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:41:09 +03:00
Avi Kivity f78e917688 KVM: Don't allow lmsw to clear cr0.pe
The current lmsw implementation allows the guest to clear cr0.pe, contrary
to the manual, which breaks EMM386.EXE.

Fix by ORing the old cr0.pe with lmsw's operand.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:41:08 +03:00
Glauber Costa 371bcf646d KVM: x86: Tell the guest we'll warn it about tsc stability
This patch puts up the flag that tells the guest that we'll warn it
about the tsc being trustworthy or not. By now, we also say
it is not.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:41:06 +03:00
Glauber Costa 84478c829d KVM: x86: export paravirtual cpuid flags in KVM_GET_SUPPORTED_CPUID
Right now, we were using individual KVM_CAP entities to communicate
userspace about which cpuids we support. This is suboptimal, since it
generates a delay between the feature arriving in the host, and
being available at the guest.

A much better mechanism is to list para features in KVM_GET_SUPPORTED_CPUID.
This makes userspace automatically aware of what we provide. And if we
ever add a new cpuid bit in the future, we have to do that again,
which create some complexity and delay in feature adoption.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:41:03 +03:00
Glauber Costa 11c6bffa42 KVM: x86: change msr numbers for kvmclock
Avi pointed out a while ago that those MSRs falls into the pentium
PMU range. So the idea here is to add new ones, and after a while,
deprecate the old ones.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:41:01 +03:00
Roedel, Joerg b69e8caef5 KVM: x86: Inject #GP with the right rip on efer writes
This patch fixes a bug in the KVM efer-msr write path. If a
guest writes to a reserved efer bit the set_efer function
injects the #GP directly. The architecture dependent wrmsr
function does not see this, assumes success and advances the
rip. This results in a #GP in the guest with the wrong rip.
This patch fixes this by reporting efer write errors back to
the architectural wrmsr function.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:39 +03:00
Joerg Roedel 3f0fd2927b KVM: x86: Fix exception reinjection forced to true
The patch merged recently which allowed to mark an exception
as reinjected has a bug as it always marks the exception as
reinjected. This breaks nested-svm shadow-on-shadow
implementation.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:37 +03:00
Avi Kivity 9ed3c444ab KVM: Fix wallclock version writing race
Wallclock writing uses an unprotected global variable to hold the version;
this can cause one guest to interfere with another if both write their
wallclock at the same time.

Acked-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:36 +03:00
Marcelo Tosatti f1d86e469b KVM: x86: properly update ready_for_interrupt_injection
The recent changes to emulate string instructions without entering guest
mode exposed a bug where pending interrupts are not properly reflected
in ready_for_interrupt_injection.

The result is that userspace overwrites a previously queued interrupt,
when irqchip's are emulated in userspace.

Fix by always updating state before returning to userspace.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:33 +03:00
Linus Torvalds 4d7b4ac22f Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (311 commits)
  perf tools: Add mode to build without newt support
  perf symbols: symbol inconsistency message should be done only at verbose=1
  perf tui: Add explicit -lslang option
  perf options: Type check all the remaining OPT_ variants
  perf options: Type check OPT_BOOLEAN and fix the offenders
  perf options: Check v type in OPT_U?INTEGER
  perf options: Introduce OPT_UINTEGER
  perf tui: Add workaround for slang < 2.1.4
  perf record: Fix bug mismatch with -c option definition
  perf options: Introduce OPT_U64
  perf tui: Add help window to show key associations
  perf tui: Make <- exit menus too
  perf newt: Add single key shortcuts for zoom into DSO and threads
  perf newt: Exit browser unconditionally when CTRL+C, q or Q is pressed
  perf newt: Fix the 'A'/'a' shortcut for annotate
  perf newt: Make <- exit the ui_browser
  x86, perf: P4 PMU - fix counters management logic
  perf newt: Make <- zoom out filters
  perf report: Report number of events, not samples
  perf hist: Clarify events_stats fields usage
  ...

Fix up trivial conflicts in kernel/fork.c and tools/perf/builtin-record.c
2010-05-18 08:19:03 -07:00
Joerg Roedel ce7ddec4bb KVM: x86: Allow marking an exception as reinjected
This patch adds logic to kvm/x86 which allows to mark an
injected exception as reinjected. This allows to remove an
ugly hack from svm_complete_interrupts that prevented
exceptions from being reinjected at all in the nested case.
The hack was necessary because an reinjected exception into
the nested guest could cause a nested vmexit emulation. But
reinjected exceptions must not intercept. The downside of
the hack is that a exception that in injected could get
lost.
This patch fixes the problem and puts the code for it into
generic x86 files because. Nested-VMX will likely have the
same problem and could reuse the code.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:26 +03:00
Joerg Roedel d4330ef2fb KVM: x86: Add callback to let modules decide over some supported cpuid bits
This patch adds the get_supported_cpuid callback to
kvm_x86_ops. It will be used in do_cpuid_ent to delegate the
decission about some supported cpuid bits to the
architecture modules.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:23 +03:00
Avi Kivity 8d3b932309 Merge remote branch 'tip/perf/core'
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:15 +03:00
Avi Kivity 87bc3bf972 KVM: MMU: Drop cr4.pge from shadow page role
Since commit bf47a760f6, we no longer handle ptes with the global bit
set specially, so there is no reason to distinguish between shadow pages
created with cr4.gpe set and clear.

Such tracking is expensive when the guest toggles cr4.pge, so drop it.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:03 +03:00
Lai Jiangshan 90d83dc3d4 KVM: use the correct RCU API for PROVE_RCU=y
The RCU/SRCU API have already changed for proving RCU usage.

I got the following dmesg when PROVE_RCU=y because we used incorrect API.
This patch coverts rcu_deference() to srcu_dereference() or family API.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
2 locks held by qemu-system-x86/8550:
 :  (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm]
 :  (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm]

stack backtrace:
Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 
Call Trace:
 [<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3
 [<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm]
 [<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm]
 [<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm]
 [<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm]
 [<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel]
 [<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm]
 [<ffffffff810a8692>] ? unlock_page+0x27/0x2c
 [<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1
 [<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm]
 [<ffffffff81060cfa>] ? up_read+0x23/0x3d
 [<ffffffff810f3587>] vfs_ioctl+0x32/0xa6
 [<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db
 [<ffffffff810e6b2f>] ? fget_light+0xc2/0x241
 [<ffffffff810e416c>] ? do_sys_open+0x104/0x116
 [<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13
 [<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a
 [<ffffffff810021db>] system_call_fastpath+0x16/0x1b

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:01 +03:00
Avi Kivity 9beeaa2d68 Merge branch 'perf'
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:17:58 +03:00
Gleb Natapov 19d0443726 KVM: fix emulator_task_switch() return value.
emulator_task_switch() should return -1 for failure and 0 for success to
the caller, just like x86_emulate_insn() does.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:49 +03:00
Jan Kiszka e269fb2189 KVM: x86: Push potential exception error code on task switches
When a fault triggers a task switch, the error code, if existent, has to
be pushed on the new task's stack. Implement the missing bits.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:46 +03:00
Gleb Natapov 8f6abd06f5 KVM: x86: get rid of mmu_only parameter in emulator_write_emulated()
We can call kvm_mmu_pte_write() directly from
emulator_cmpxchg_emulated() instead of passing mmu_only down to
emulator_write_emulated_onepage() and call it there.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:43 +03:00
Gleb Natapov 020df0794f KVM: move DR register access handling into generic code
Currently both SVM and VMX have their own DR handling code. Move it to
x86.c.

Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:39 +03:00
Avi Kivity f7a711971e KVM: Fix MAXPHYADDR calculation when cpuid does not support it
MAXPHYADDR is derived from cpuid 0x80000008, but when that isn't present, we
get some random value.

Fix by checking first that cpuid 0x80000008 is supported.

Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:36 +03:00
Avi Kivity e46479f852 KVM: Trace emulated instructions
Log emulated instructions in ftrace, especially if they failed.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:35 +03:00
Gleb Natapov 482ac18ae2 KVM: x86 emulator: commit rflags as part of registers commit
Make sure that rflags is committed only after successful instruction
emulation.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:16:35 +03:00
Jan Kiszka 9749a6c0f0 KVM: x86: Fix 32-bit build breakage due to typo
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:16:34 +03:00
Gleb Natapov 92bf9748b5 KVM: small kvm_arch_vcpu_ioctl_run() cleanup.
Unify all conditions that get us back into emulator after returning from
userspace.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:16:32 +03:00
Gleb Natapov 5cd21917da KVM: x86 emulator: restart string instruction without going back to a guest.
Currently when string instruction is only partially complete we go back
to a guest mode, guest tries to reexecute instruction and exits again
and at this point emulation continues. Avoid all of this by restarting
instruction without going back to a guest mode, but return to a guest
mode each 1024 iterations to allow interrupt injection. Pending
exception causes immediate guest entry too.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:16:29 +03:00
Gleb Natapov 7972995b0c KVM: x86 emulator: Move string pio emulation into emulator.c
Currently emulation is done outside of emulator so things like doing
ins/outs to/from mmio are broken it also makes it hard (if not impossible)
to implement single stepping in the future. The implementation in this
patch is not efficient since it exits to userspace for each IO while
previous implementation did 'ins' in batches. Further patch that
implements pio in string read ahead address this problem.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:16:26 +03:00
Gleb Natapov cf8f70bfe3 KVM: x86 emulator: fix in/out emulation.
in/out emulation is broken now. The breakage is different depending
on where IO device resides. If it is in userspace emulator reports
emulation failure since it incorrectly interprets kvm_emulate_pio()
return value. If IO device is in the kernel emulation of 'in' will do
nothing since kvm_emulate_pio() stores result directly into vcpu
registers, so emulator will overwrite result of emulation during
commit of shadowed register.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:16:25 +03:00
Gleb Natapov ceffb45972 KVM: Use task switch from emulator.c
Remove old task switch code from x86.c

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:16:18 +03:00
Gleb Natapov 2dafc6c234 KVM: x86 emulator: Provide more callbacks for x86 emulator.
Provide get_cached_descriptor(), set_cached_descriptor(),
get_segment_selector(), set_segment_selector(), get_gdt(),
write_std() callbacks.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:16:14 +03:00
Gleb Natapov 063db061b9 KVM: Provide current eip as part of emulator context.
Eliminate the need to call back into KVM to get it from emulator.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:15:59 +03:00
Gleb Natapov 9c5372445c KVM: Provide x86_emulate_ctxt callback to get current cpl
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:15:57 +03:00
Gleb Natapov 93a152be5a KVM: remove realmode_lmsw function.
Use (get|set)_cr callback to emulate lmsw inside emulator.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:15:56 +03:00
Gleb Natapov 52a4661737 KVM: Provide callback to get/set control registers in emulator ops.
Use this callback instead of directly call kvm function. Also rename
realmode_(set|get)_cr to emulator_(set|get)_cr since function has nothing
to do with real mode.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:15:54 +03:00
Gleb Natapov 49c6799a2c KVM: Remove pointer to rflags from realmode_set_cr parameters.
Mov reg, cr instruction doesn't change flags in any meaningful way, so
no need to update rflags after instruction execution.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:15:50 +03:00
Avi Kivity 4a5f48f666 KVM: Don't follow an atomic operation by a non-atomic one
Currently emulated atomic operations are immediately followed by a non-atomic
operation, so that kvm_mmu_pte_write() can be invoked.  This updates the mmu
but undoes the whole point of doing things atomically.

Fix by only performing the atomic operation and the mmu update, and avoiding
the non-atomic write.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:15:40 +03:00
Avi Kivity daea3e73cb KVM: Make locked operations truly atomic
Once upon a time, locked operations were emulated while holding the mmu mutex.
Since mmu pages were write protected, it was safe to emulate the writes in
a non-atomic manner, since there could be no other writer, either in the
guest or in the kernel.

These days emulation takes place without holding the mmu spinlock, so the
write could be preempted by an unshadowing event, which exposes the page
to writes by the guest.  This may cause corruption of guest page tables.

Fix by using an atomic cmpxchg for these operations.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:15:39 +03:00
Wei Yongjun 160d2f6c0c KVM: x86: fix the error of ioctl KVM_IRQ_LINE if no irq chip
If no irq chip in kernel, ioctl KVM_IRQ_LINE will return -EFAULT.
But I see in other place such as KVM_[GET|SET]IRQCHIP, -ENXIO is
return. So this patch used -ENXIO instead of -EFAULT.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:15:31 +03:00
Avi Kivity 5c1c85d08d KVM: Trace exception injection
Often an exception can help point out where things start to go wrong.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:15:27 +03:00
Xiao Guangrong 2ed152afc7 KVM: cleanup kvm trace
This patch does:

 - no need call tracepoint_synchronize_unregister() when kvm module
   is unloaded since ftrace can handle it

 - cleanup ftrace's macro

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:15:22 +03:00
Dongxiao Xu fe19c5a46b KVM: x86: Call vcpu_load and vcpu_put in cpuid_update
cpuid_update may operate VMCS, so vcpu_load() and vcpu_put()
should be called to ensure correctness.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-13 01:31:02 -03:00
Gleb Natapov 2d49ec72d3 KVM: move segment_base() into vmx.c
segment_base() is used only by vmx so move it there.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 13:53:39 +03:00
Gleb Natapov 254d4d48a5 KVM: fix segment_base() error checking
fix segment_base() to properly check for null segment selector and
avoid accessing NULL pointer if ldt selector in null.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 13:53:35 +03:00
Gleb Natapov d6ab1ed446 KVM: Drop kvm_get_gdt() in favor of generic linux function
Linux now has native_store_gdt() to do the same. Use it instead of
kvm local version.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 13:53:32 +03:00
Joerg Roedel b44ea385d8 KVM: x86: Don't set arch.cr0 in kvm_set_cr0
The vcpu->arch.cr0 variable is already set in the
architecture specific set_cr0 callbacks. There is no need to
set it in the common code.
This allows the architecture code to keep the old arch.cr0
value if it wants. This is required for nested svm to decide
if a selective_cr0 exit needs to be injected.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 13:53:20 +03:00
Joerg Roedel 82494028df KVM: SVM: Ignore write of hwcr.ignne
Hyper-V as a guest wants to write this bit. This patch
ignores it.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 13:53:17 +03:00
Joerg Roedel 2e554e8d67 KVM: SVM: Add kvm_nested_intercepts tracepoint
This patch adds a tracepoint to get information about the
most important intercept bitmasks from the nested vmcb.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 13:53:10 +03:00
Jan Kiszka 83bf0002c9 KVM: x86: Preserve injected TF across emulation
Call directly into the vendor services for getting/setting rflags in
emulate_instruction to ensure injected TF survives the emulation.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 13:52:55 +03:00
Jan Kiszka c310bac5a2 KVM: x86: Drop RF manipulation for guest single-stepping
RF is not required for injecting TF as the latter will trigger only
after an instruction execution anyway. So do not touch RF when arming or
disarming guest single-step mode.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 13:52:51 +03:00
Jan Kiszka f92653eeb4 KVM: x86: Add kvm_is_linear_rip
Based on Gleb's suggestion: Add a helper kvm_is_linear_rip that matches
a given linear RIP against the current one. Use this for guest
single-stepping, more users will follow.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 13:00:40 +03:00
Jan Kiszka a1efbe77c1 KVM: x86: Add support for saving&restoring debug registers
So far user space was not able to save and restore debug registers for
migration or after reset. Plug this hole.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 12:39:10 +03:00
Jan Kiszka 48005f64d0 KVM: x86: Save&restore interrupt shadow mask
The interrupt shadow created by STI or MOV-SS-like operations is part of
the VCPU state and must be preserved across migration. Transfer it in
the spare padding field of kvm_vcpu_events.interrupt.

As a side effect we now have to make vmx_set_interrupt_shadow robust
against both shadow types being set. Give MOV SS a higher priority and
skip STI in that case to avoid that VMX throws a fault on next entry.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 12:38:28 +03:00
Jan Kiszka 03b82a30ea KVM: x86: Do not return soft events in vcpu_events
To avoid that user space migrates a pending software exception or
interrupt, mask them out on KVM_GET_VCPU_EVENTS. Without this, user
space would try to reinject them, and we would have to reconstruct the
proper instruction length for VMX event injection. Now the pending event
will be reinjected via executing the triggering instruction again.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 12:38:14 +03:00
Gleb Natapov 112592da0d KVM: drop unneeded kvm_run check in emulate_instruction()
vcpu->run is initialized on vcpu creation and can never be NULL
here.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 12:38:08 +03:00
Gleb Natapov 89a27f4d0e KVM: use desc_ptr struct instead of kvm private descriptor_table
x86 arch defines desc_ptr for idt/gdt pointers, no need to define
another structure in kvm code.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25 12:27:28 +03:00
Ingo Molnar 70bce3ba77 Merge branch 'linus' into perf/core
Merge reason: merge the latest fixes, update to latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-23 11:10:30 +02:00
Jan Kiszka e8861cfe2c KVM: x86: Fix TSS size check for 16-bit tasks
A 16-bit TSS is only 44 bytes long. So make sure to test for the correct
size on task switch.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-21 13:51:42 +03:00
Takuya Yoshikawa 87bf6e7de1 KVM: fix the handling of dirty bitmaps to avoid overflows
Int is not long enough to store the size of a dirty bitmap.

This patch fixes this problem with the introduction of a wrapper
function to calculate the sizes of dirty bitmaps.

Note: in mark_page_dirty(), we have to consider the fact that
  __set_bit() takes the offset as int, not long.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-04-20 13:06:55 +03:00
Andre Przywara 114be429c8 KVM: allow bit 10 to be cleared in MSR_IA32_MC4_CTL
There is a quirk for AMD K8 CPUs in many Linux kernels (see
arch/x86/kernel/cpu/mcheck/mce.c:__mcheck_cpu_apply_quirks()) that
clears bit 10 in that MCE related MSR. KVM can only cope with all
zeros or all ones, so it will inject a #GP into the guest, which
will let it panic.
So lets add a quirk to the quirk and ignore this single cleared bit.
This fixes -cpu kvm64 on all machines and -cpu host on K8 machines
with some guest Linux kernels.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-20 12:59:31 +03:00
Avi Kivity d6a23895aa KVM: Don't spam kernel log when injecting exceptions due to bad cr writes
These are guest-triggerable.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-20 12:55:05 +03:00
Gleb Natapov 7567cae105 KVM: take srcu lock before call to complete_pio()
complete_pio() may use slot table which is protected by srcu.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-20 12:55:04 +03:00
Zhang, Yanmin dcf46b9443 perf & kvm: Clean up some of the guest profiling callback API details
Fix some build bug and programming style issues:

 - use valid C
 - fix up various style details

Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sheng Yang <sheng@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: oerg Roedel <joro@8bytes.org>
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Zachary Amsden <zamsden@redhat.com>
Cc: zhiteng.huang@intel.com
Cc: tim.c.chen@intel.com
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <1271729638.2078.624.camel@ymzhang.sh.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-20 08:08:28 +02:00
Zhang, Yanmin ff9d07a0e7 KVM: Implement perf callbacks for guest sampling
Below patch implements the perf_guest_info_callbacks on kvm.

Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-19 12:36:50 +03:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from  to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jan Kiszka d2be1651b7 KVM: x86: Add KVM_CAP_X86_ROBUST_SINGLESTEP
This marks the guest single-step API improvement of 94fe45da and
91586a3b with a capability flag to allow reliable detection by user
space.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: stable@kernel.org (2.6.33)
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:14 -03:00
Gleb Natapov c697518a86 KVM: Fix segment descriptor loading
Add proper error and permission checking. This patch also change task
switching code to load segment selectors before segment descriptors, like
SDM requires, otherwise permission checking during segment descriptor
loading will be incorrect.

Cc: stable@kernel.org (2.6.33, 2.6.32)
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:14 -03:00
Takuya Yoshikawa 6f550484a1 KVM: Fix load_guest_segment_descriptor() to inject page fault
This patch injects page fault when reading descriptor in
load_guest_segment_descriptor() fails with FAULT.

Effects of this injection: This function is used by
kvm_load_segment_descriptor() which is necessary for the
following instructions:

 - mov seg,r/m16
 - jmp far
 - pop ?s

This patch makes it possible to emulate the page faults
generated by these instructions. But be sure that unless
we change the kvm_load_segment_descriptor()'s ret value
propagation this patch has no effect.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:13 -03:00
Thomas Gleixner fa8273e954 KVM: Convert i8254/i8259 locks to raw_spinlocks
The i8254/i8259 locks need to be real spinlocks on preempt-rt. Convert
them to raw_spinlock. No change for !RT kernels.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:12 -03:00
Gleb Natapov f850e2e603 KVM: x86 emulator: Check IOPL level during io instruction emulation
Make emulator check that vcpu is allowed to execute IN, INS, OUT,
OUTS, CLI, STI.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:11 -03:00
Gleb Natapov 1871c6020d KVM: x86 emulator: fix memory access during x86 emulation
Currently when x86 emulator needs to access memory, page walk is done with
broadest permission possible, so if emulated instruction was executed
by userspace process it can still access kernel memory. Fix that by
providing correct memory access to page walker during emulation.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:11 -03:00
Gleb Natapov a004475567 KVM: x86 emulator: Add Virtual-8086 mode of emulation
For some instructions CPU behaves differently for real-mode and
virtual 8086. Let emulator know which mode cpu is in, so it will
not poke into vcpu state directly.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:11 -03:00
Wei Yongjun 72bb2fcd23 KVM: cleanup the failure path of KVM_CREATE_IRQCHIP ioctrl
If we fail to init ioapic device or the fail to setup the default irq
routing, the device register by kvm_create_pic() and kvm_ioapic_init()
remain unregister. This patch fixed to do this.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:10 -03:00
Takuya Yoshikawa 1976d2d2c9 KVM: Remove redundant reading of rax on OUT instructions
kvm_emulate_pio() and complete_pio() both read out the
RAX register value and copy it to a place into which
the value read out from the port will be copied later.

This patch removes this redundancy.

/*** snippet from arch/x86/kvm/x86.c ***/
int complete_pio(struct kvm_vcpu *vcpu)
{
	...
	if (!io->string) {
		if (io->in) {
			val = kvm_register_read(vcpu, VCPU_REGS_RAX);
			memcpy(&val, vcpu->arch.pio_data, io->size);
			kvm_register_write(vcpu, VCPU_REGS_RAX, val);
		}
	...

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:09 -03:00
Takuya Yoshikawa 7edcface95 KVM: fix kvm_fix_hypercall() to return X86EMUL_*
This patch fixes kvm_fix_hypercall() to propagate X86EMUL_*
info generated by emulator_write_emulated() to its callers:
suggested by Marcelo.

The effect of this is x86_emulate_insn() will begin to handle
the page faults which occur in emulator_write_emulated():
this should be OK because emulator_write_emulated_onepage()
always injects page fault when emulator_write_emulated()
returns X86EMUL_PROPAGATE_FAULT.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:07 -03:00
Takuya Yoshikawa c125c60732 KVM: fix load_guest_segment_descriptor() to return X86EMUL_*
This patch fixes load_guest_segment_descriptor() to return
X86EMUL_PROPAGATE_FAULT when it tries to access the descriptor
table beyond the limit of it: suggested by Marcelo.

I have checked current callers of this helper function,
  - kvm_load_segment_descriptor()
  - kvm_task_switch()
and confirmed that this patch will change nothing in the
upper layers if we do not change the handling of this
return value from load_guest_segment_descriptor().

Next step: Although fixing the kvm_task_switch() to handle the
propagated faults properly seems difficult, and maybe not worth
it because TSS is not used commonly these days, we can fix
kvm_load_segment_descriptor(). By doing so, the injected #GP
becomes possible to be handled by the guest. The only problem
for this is how to differentiate this fault from the page faults
generated by kvm_read_guest_virt(). We may have to split this
function to achive this goal.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:07 -03:00
Zhai, Edwin ab9f4ecbb6 KVM: enable PCI multiple-segments for pass-through device
Enable optional parameter (default 0) - PCI segment (or domain) besides
BDF, when assigning PCI device to guest.

Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:06 -03:00
Gleb Natapov e01c242614 KVM: mark segments accessed on HW task switch
On HW task switch newly loaded segments should me marked as accessed.

Reported-by: Lorenzo Martignoni <martignlo@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:06 -03:00
Avi Kivity 0c04851c0c KVM: trace guest fpu loads and unloads
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:05 -03:00
Avi Kivity f6801dff23 KVM: Rename vcpu->shadow_efer to efer
None of the other registers have the shadow_ prefix.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:04 -03:00
Avi Kivity 3eeb3288bc KVM: Add a helper for checking if the guest is in protected mode
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:04 -03:00
Avi Kivity 6b52d18605 KVM: Activate fpu on clts
Assume that if the guest executes clts, it knows what it's doing, and load the
guest fpu to prevent an #NM exception.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:04 -03:00
Avi Kivity e5bb40251a KVM: Drop kvm_{load,put}_guest_fpu() exports
Not used anymore.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:04 -03:00
Avi Kivity 2608d7a12f KVM: Allow kvm_load_guest_fpu() even when !vcpu->fpu_active
This allows accessing the guest fpu from the instruction emulator, as well as
being symmetric with kvm_put_guest_fpu().

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:03 -03:00
Gleb Natapov ab344828eb KVM: x86: fix checking of cr0 validity
Move to/from Control Registers chapter of Intel SDM says.  "Reserved bits
in CR0 remain clear after any load of those registers; attempts to set
them have no impact". Control Register chapter says "Bits 63:32 of CR0 are
reserved and must be written with zeros. Writing a nonzero value to any
of the upper 32 bits results in a general-protection exception, #GP(0)."

This patch tries to implement this twisted logic.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Reported-by: Lorenzo Martignoni <martignlo@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:03 -03:00
Jan Kiszka c76de350c8 KVM: SVM: Clean up and enhance mov dr emulation
Enhance mov dr instruction emulation used by SVM so that it properly
handles dr4/5: alias to dr6/7 if cr4.de is cleared. Otherwise return
EMULATE_FAIL which will let our only possible caller in that scenario,
ud_interception, re-inject UD.

We do not need to inject faults, SVM does this for us (exceptions take
precedence over instruction interceptions). For the same reason, the
value overflow checks can be removed.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:02 -03:00
Marcelo Tosatti 6474920477 KVM: fix cleanup_srcu_struct on vm destruction
cleanup_srcu_struct on VM destruction remains broken:

BUG: unable to handle kernel paging request at ffffffffffffffff
IP: [<ffffffff802533d2>] srcu_read_lock+0x16/0x21
RIP: 0010:[<ffffffff802533d2>]  [<ffffffff802533d2>] srcu_read_lock+0x16/0x21
Call Trace:
 [<ffffffffa05354c4>] kvm_arch_vcpu_uninit+0x1b/0x48 [kvm]
 [<ffffffffa05339c6>] kvm_vcpu_uninit+0x9/0x15 [kvm]
 [<ffffffffa0569f7d>] vmx_free_vcpu+0x7f/0x8f [kvm_intel]
 [<ffffffffa05357b5>] kvm_arch_destroy_vm+0x78/0x111 [kvm]
 [<ffffffffa053315b>] kvm_put_kvm+0xd4/0xfe [kvm]

Move it to kvm_arch_destroy_vm.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
2010-03-01 12:36:01 -03:00
Gleb Natapov ccd469362e KVM: fix Hyper-V hypercall warnings and wrong mask value
Fix compilation warnings and wrong mask value.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:01 -03:00
Gleb Natapov c25bc1638a KVM: Implement NotifyLongSpinWait HYPER-V hypercall
Windows issues this hypercall after guest was spinning on a spinlock
for too many iterations.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:00 -03:00
Gleb Natapov 10388a0716 KVM: Add HYPER-V apic access MSRs
Implement HYPER-V apic MSRs. Spec defines three MSRs that speed-up
access to EOI/TPR/ICR apic registers for PV guests.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:00 -03:00
Gleb Natapov 55cd8e5a4e KVM: Implement bare minimum of HYPER-V MSRs
Minimum HYPER-V implementation should have GUEST_OS_ID, HYPERCALL and
VP_INDEX MSRs.

[avi: fix build on i386]

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:57 -03:00
Avi Kivity f9a48e6a18 KVM: Set cr0.et when the guest writes cr0
Follow the hardware.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:51 -03:00
Avi Kivity 02daab21d9 KVM: Lazify fpu activation and deactivation
Defer fpu deactivation as much as possible - if the guest fpu is loaded, keep
it loaded until the next heavyweight exit (where we are forced to unload it).
This reduces unnecessary exits.

We also defer fpu activation on clts; while clts signals the intent to use the
fpu, we can't be sure the guest will actually use it.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:50 -03:00
Avi Kivity 4d4ec08745 KVM: Replace read accesses of vcpu->arch.cr0 by an accessor
Since we'd like to allow the guest to own a few bits of cr0 at times, we need
to know when we access those bits.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:50 -03:00
Sheng Yang 17cc393596 KVM: x86: Rename gb_page_enable() to get_lpage_level() in kvm_x86_ops
Then the callback can provide the maximum supported large page level, which
is more flexible.

Also move the gb page support into x86_64 specific.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:46 -03:00
Marcelo Tosatti 79fac95ecf KVM: convert slots_lock to a mutex
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:45 -03:00
Marcelo Tosatti f656ce0185 KVM: switch vcpu context to use SRCU
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:45 -03:00
Marcelo Tosatti e93f8a0f82 KVM: convert io_bus to SRCU
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:45 -03:00
Marcelo Tosatti a983fb2387 KVM: x86: switch kvm_set_memory_alias to SRCU update
Using a similar two-step procedure as for memslots.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:45 -03:00
Marcelo Tosatti b050b015ab KVM: use SRCU for dirty log
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:44 -03:00
Marcelo Tosatti f7784b8ec9 KVM: split kvm_arch_set_memory_region into prepare and commit
Required for SRCU convertion later.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:44 -03:00
Marcelo Tosatti fef9cce0eb KVM: modify alias layout in x86s struct kvm_arch
Have a pointer to an allocated region inside x86's kvm_arch.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:43 -03:00
Marcelo Tosatti 46a26bf557 KVM: modify memslots layout in struct kvm
Have a pointer to an allocated region inside struct kvm.

[alex: fix ppc book 3s]

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:43 -03:00
Sheng Yang 4e47c7a6d7 KVM: VMX: Add instruction rdtscp support for guest
Before enabling, execution of "rdtscp" in guest would result in #UD.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:40 -03:00
Sheng Yang 0e85188049 KVM: Add cpuid_update() callback to kvm_x86_ops
Sometime, we need to adjust some state in order to reflect guest CPUID
setting, e.g. if we don't expose rdtscp to guest, we won't want to enable
it on hardware. cpuid_update() is introduced for this purpose.

Also export kvm_find_cpuid_entry() for later use.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:40 -03:00
Sheng Yang 2bf78fa7b9 KVM: Extended shared_msr_global to per CPU
shared_msr_global saved host value of relevant MSRs, but it have an
assumption that all MSRs it tracked shared the value across the different
CPUs. It's not true with some MSRs, e.g. MSR_TSC_AUX.

Extend it to per CPU to provide the support of MSR_TSC_AUX, and more
alike MSRs.

Notice now the shared_msr_global still have one assumption: it can only deal
with the MSRs that won't change in host after KVM module loaded.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:40 -03:00
Avi Kivity fc78f51938 KVM: Add accessor for reading cr4 (or some bits of cr4)
Some bits of cr4 can be owned by the guest on vmx, so when we read them,
we copy them to the vcpu structure.  In preparation for making the set of
guest-owned bits dynamic, use helpers to access these bits so we don't need
to know where the bit resides.

No changes to svm since all bits are host-owned there.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:39 -03:00
Marcelo Tosatti cb84b55f6c KVM: x86: raise TSS exception for NULL CS and SS segments
Windows 2003 uses task switch to triple fault and reboot (the other
exception being reserved pdptrs bits).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:38 -03:00