We need a new capability to indicate support for the newly added
HvFlushVirtualAddress{List,Space}{,Ex} hypercalls. Upon seeing this
capability, userspace is supposed to announce PV TLB flush features
by setting the appropriate CPUID bits (if needed).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Simple one-shot poll through the io_submit() interface. To poll for
a file descriptor the application should submit an iocb of type
IOCB_CMD_POLL. It will poll the fd for the events specified in the
the first 32 bits of the aio_buf field of the iocb.
Unlike poll or epoll without EPOLLONESHOT this interface always works
in one shot mode, that is once the iocb is completed, it will have to be
resubmitted.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Pull networking fixes from David Miller:
"Let's begin the holiday weekend with some networking fixes:
1) Whoops need to restrict cfg80211 wiphy names even more to 64
bytes. From Eric Biggers.
2) Fix flags being ignored when using kernel_connect() with SCTP,
from Xin Long.
3) Use after free in DCCP, from Alexey Kodanev.
4) Need to check rhltable_init() return value in ipmr code, from Eric
Dumazet.
5) XDP handling fixes in virtio_net from Jason Wang.
6) Missing RTA_TABLE in rtm_ipv4_policy[], from Roopa Prabhu.
7) Need to use IRQ disabling spinlocks in mlx4_qp_lookup(), from Jack
Morgenstein.
8) Prevent out-of-bounds speculation using indexes in BPF, from
Daniel Borkmann.
9) Fix regression added by AF_PACKET link layer cure, from Willem de
Bruijn.
10) Correct ENIC dma mask, from Govindarajulu Varadarajan.
11) Missing config options for PMTU tests, from Stefano Brivio"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
ibmvnic: Fix partial success login retries
selftests/net: Add missing config options for PMTU tests
mlx4_core: allocate ICM memory in page size chunks
enic: set DMA mask to 47 bit
ppp: remove the PPPIOCDETACH ioctl
ipv4: remove warning in ip_recv_error
net : sched: cls_api: deal with egdev path only if needed
vhost: synchronize IOTLB message with dev cleanup
packet: fix reserve calculation
net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands
net/mlx5e: When RXFCS is set, add FCS data into checksum calculation
bpf: properly enforce index mask to prevent out-of-bounds speculation
net/mlx4: Fix irq-unsafe spinlock usage
net: phy: broadcom: Fix bcm_write_exp()
net: phy: broadcom: Fix auxiliary control register reads
net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy
net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase message
ibmvnic: Only do H_EOI for mobility events
tuntap: correctly set SOCKWQ_ASYNC_NOSPACE
virtio-net: fix leaking page for gso packet during mergeable XDP
...
Define netlink messages and attributes to support user kernel
communication that uses the conntrack limit feature.
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series contains updates for mlx5e netdevice driver with one subject,
DSCP to priority mapping, in the first patch Huy adds the needed API in
dcbnl, the second patch adds the needed mlx5 core capability bits for the
feature, and all other patches are mlx5e (netdev) only changes to add
support for the feature.
From: Huy Nguyen
Dscp to priority mapping for Ethernet packet:
These patches enable differentiated services code point (dscp) to
priority mapping for Ethernet packet. Once this feature is
enabled, the packet is routed to the corresponding priority based on its
dscp. User can combine this feature with priority flow control (pfc)
feature to have priority flow control based on the dscp.
Firmware interface:
Mellanox firmware provides two control knobs for this feature:
QPTS register allow changing the trust state between dscp and
pcp mode. The default is pcp mode. Once in dscp mode, firmware will
route the packet based on its dscp value if the dscp field exists.
QPDPM register allow mapping a specific dscp (0 to 63) to a
specific priority (0 to 7). By default, all the dscps are mapped to
priority zero.
Software interface:
This feature is controlled via application priority TLV. IEEE
specification P802.1Qcd/D2.1 defines priority selector id 5 for
application priority TLV. This APP TLV selector defines DSCP to priority
map. This APP TLV can be sent by the switch or can be set locally using
software such as lldptool. In mlx5 drivers, we add the support for net
dcb's getapp and setapp call back. Mlx5 driver only handles the selector
id 5 application entry (dscp application priority application entry).
If user sends multiple dscp to priority APP TLV entries on the same
dscp, the last sent one will take effect. All the previous sent will be
deleted.
This attribute combined with pfc attribute allows advanced user to
fine tune the qos setting for specific priority queue. For example,
user can give dedicated buffer for one or more priorities or user
can give large buffer to certain priorities.
The dcb buffer configuration will be controlled by lldptool.
>> lldptool -T -i eth2 -V BUFFER prio 0,2,5,7,1,2,3,6
maps priorities 0,1,2,3,4,5,6,7 to receive buffer 0,2,5,7,1,2,3,6
>> lldptool -T -i eth2 -V BUFFER size 87296,87296,0,87296,0,0,0,0
sets receive buffer size for buffer 0,1,2,3,4,5,6,7 respectively
After discussion on mailing list with Jakub, Jiri, Ido and John, we agreed to
choose dcbnl over devlink interface since this feature is intended to set
port attributes which are governed by the netdev instance of that port, where
devlink API is more suitable for global ASIC configurations.
The firmware trust state (in QPTS register) is changed based on the
number of dscp to priority application entries. When the first dscp to
priority application entry is added by the user, the trust state is
changed to dscp. When the last dscp to priority application entry is
deleted by the user, the trust state is changed to pcp.
When the port is in DSCP trust state, the transmit queue is selected
based on the dscp of the skb.
When the port is in DSCP trust state and vport inline mode is not NONE,
firmware requires mlx5 driver to copy the IP header to the
wqe ethernet segment inline header if the skb has it.
This is done by changing the transmit queue sq's min inline mode to L3.
Note that the min inline mode of sqs that belong to other features
such as xdpsq, icosq are not modified.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbBy2YAAoJEEg/ir3gV/o+RkYIAId0h3GqVof41/qCHPuqx+7j
J/lTJSU+PHDZfVAuXhoQN5lFGsRku/wkqdSZNXxwvbUxVzIoUpxWvlaEv+481Cmj
+WhVC1QIExGYUs4CCGjgl853kNtGpDrZmk+olY3QaQISHdpcmgs/W13YlEKRyw5q
nFSa6GLA/3IQXb7eOwUiSW1gYYjn/eM2XFHntTTOeasa9dwb2QDqDQdoYiKdS+yS
KxqxrlADU4V+CtNlOmZ4QGxOa7suBBr+a6JvNnvviYOKKpYMNQRbhUbgu0pPdKAt
zbHHS7Twy1ka3s6CKk/QIT7/YWfCOQgWy6LGPCtUuGUA6dy5xsV7i2BtoDwMC7o=
=EJd2
-----END PGP SIGNATURE-----
Merge tag 'mlx5e-updates-2018-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5e-updates-2018-05-19
This series contains updates for mlx5e netdevice driver with one subject,
DSCP to priority mapping, in the first patch Huy adds the needed API in
dcbnl, the second patch adds the needed mlx5 core capability bits for the
feature, and all other patches are mlx5e (netdev) only changes to add
support for the feature.
From: Huy Nguyen
Dscp to priority mapping for Ethernet packet:
These patches enable differentiated services code point (dscp) to
priority mapping for Ethernet packet. Once this feature is
enabled, the packet is routed to the corresponding priority based on its
dscp. User can combine this feature with priority flow control (pfc)
feature to have priority flow control based on the dscp.
Firmware interface:
Mellanox firmware provides two control knobs for this feature:
QPTS register allow changing the trust state between dscp and
pcp mode. The default is pcp mode. Once in dscp mode, firmware will
route the packet based on its dscp value if the dscp field exists.
QPDPM register allow mapping a specific dscp (0 to 63) to a
specific priority (0 to 7). By default, all the dscps are mapped to
priority zero.
Software interface:
This feature is controlled via application priority TLV. IEEE
specification P802.1Qcd/D2.1 defines priority selector id 5 for
application priority TLV. This APP TLV selector defines DSCP to priority
map. This APP TLV can be sent by the switch or can be set locally using
software such as lldptool. In mlx5 drivers, we add the support for net
dcb's getapp and setapp call back. Mlx5 driver only handles the selector
id 5 application entry (dscp application priority application entry).
If user sends multiple dscp to priority APP TLV entries on the same
dscp, the last sent one will take effect. All the previous sent will be
deleted.
This attribute combined with pfc attribute allows advanced user to
fine tune the qos setting for specific priority queue. For example,
user can give dedicated buffer for one or more priorities or user
can give large buffer to certain priorities.
The dcb buffer configuration will be controlled by lldptool.
>> lldptool -T -i eth2 -V BUFFER prio 0,2,5,7,1,2,3,6
maps priorities 0,1,2,3,4,5,6,7 to receive buffer 0,2,5,7,1,2,3,6
>> lldptool -T -i eth2 -V BUFFER size 87296,87296,0,87296,0,0,0,0
sets receive buffer size for buffer 0,1,2,3,4,5,6,7 respectively
After discussion on mailing list with Jakub, Jiri, Ido and John, we agreed to
choose dcbnl over devlink interface since this feature is intended to set
port attributes which are governed by the netdev instance of that port, where
devlink API is more suitable for global ASIC configurations.
The firmware trust state (in QPTS register) is changed based on the
number of dscp to priority application entries. When the first dscp to
priority application entry is added by the user, the trust state is
changed to dscp. When the last dscp to priority application entry is
deleted by the user, the trust state is changed to pcp.
When the port is in DSCP trust state, the transmit queue is selected
based on the dscp of the skb.
When the port is in DSCP trust state and vport inline mode is not NONE,
firmware requires mlx5 driver to copy the IP header to the
wqe ethernet segment inline header if the skb has it.
This is done by changing the transmit queue sq's min inline mode to L3.
Note that the min inline mode of sqs that belong to other features
such as xdpsq, icosq are not modified.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for a new port flag - BR_ISOLATED. If it is set
then isolated ports cannot communicate between each other, but they can
still communicate with non-isolated ports. The same can be achieved via
ACLs but they can't scale with large number of ports and also the
complexity of the rules grows. This feature can be used to achieve
isolated vlan functionality (similar to pvlan) as well, though currently
it will be port-wide (for all vlans on the port). The new test in
should_deliver uses data that is already cache hot and the new boolean
is used to avoid an additional source port test in should_deliver.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PPPIOCDETACH ioctl effectively tries to "close" the given ppp file
before f_count has reached 0, which is fundamentally a bad idea. It
does check 'f_count < 2', which excludes concurrent operations on the
file since they would only be possible with a shared fd table, in which
case each fdget() would take a file reference. However, it fails to
account for the fact that even with 'f_count == 1' the file can still be
linked into epoll instances. As reported by syzbot, this can trivially
be used to cause a use-after-free.
Yet, the only known user of PPPIOCDETACH is pppd versions older than
ppp-2.4.2, which was released almost 15 years ago (November 2003).
Also, PPPIOCDETACH apparently stopped working reliably at around the
same time, when the f_count check was added to the kernel, e.g. see
https://lkml.org/lkml/2002/12/31/83. Also, the current 'f_count < 2'
check makes PPPIOCDETACH only work in single-threaded applications; it
always fails if called from a multithreaded application.
All pppd versions released in the last 15 years just close() the file
descriptor instead.
Therefore, instead of hacking around this bug by exporting epoll
internals to modules, and probably missing other related bugs, just
remove the PPPIOCDETACH ioctl and see if anyone actually notices. Leave
a stub in place that prints a one-time warning and returns EINVAL.
Reported-by: syzbot+16363c99d4134717c05b@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Guillaume Nault <g.nault@alphalink.fr>
Tested-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-05-24
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc).
2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers.
3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit.
4) Jiong Wang adds support for indirect and arithmetic shifts to NFP
5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible.
6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing
to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions.
7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT.
8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events.
9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, suppose a userspace application has loaded a bpf program
and attached it to a tracepoint/kprobe/uprobe, and a bpf
introspection tool, e.g., bpftool, wants to show which bpf program
is attached to which tracepoint/kprobe/uprobe. Such attachment
information will be really useful to understand the overall bpf
deployment in the system.
There is a name field (16 bytes) for each program, which could
be used to encode the attachment point. There are some drawbacks
for this approaches. First, bpftool user (e.g., an admin) may not
really understand the association between the name and the
attachment point. Second, if one program is attached to multiple
places, encoding a proper name which can imply all these
attachments becomes difficult.
This patch introduces a new bpf subcommand BPF_TASK_FD_QUERY.
Given a pid and fd, if the <pid, fd> is associated with a
tracepoint/kprobe/uprobe perf event, BPF_TASK_FD_QUERY will return
. prog_id
. tracepoint name, or
. k[ret]probe funcname + offset or kernel addr, or
. u[ret]probe filename + offset
to the userspace.
The user can use "bpftool prog" to find more information about
bpf program itself with prog_id.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In this patch, we add dcbnl buffer attribute to allow user
change the NIC's buffer configuration such as priority
to buffer mapping and buffer size of individual buffer.
This attribute combined with pfc attribute allows advanced user to
fine tune the qos setting for specific priority queue. For example,
user can give dedicated buffer for one or more priorities or user
can give large buffer to certain priorities.
The dcb buffer configuration will be controlled by lldptool.
lldptool -T -i eth2 -V BUFFER prio 0,2,5,7,1,2,3,6
maps priorities 0,1,2,3,4,5,6,7 to receive buffer 0,2,5,7,1,2,3,6
lldptool -T -i eth2 -V BUFFER size 87296,87296,0,87296,0,0,0,0
sets receive buffer size for buffer 0,1,2,3,4,5,6,7 respectively
After discussion on mailing list with Jakub, Jiri, Ido and John, we agreed to
choose dcbnl over devlink interface since this feature is intended to set
port attributes which are governed by the netdev instance of that port, where
devlink API is more suitable for global ASIC configurations.
We present an use case scenario where dcbnl buffer attribute configured
by advance user helps reduce the latency of messages of different sizes.
Scenarios description:
On ConnectX-5, we run latency sensitive traffic with
small/medium message sizes ranging from 64B to 256KB and bandwidth sensitive
traffic with large messages sizes 512KB and 1MB. We group small, medium,
and large message sizes to their own pfc enables priorities as follow.
Priorities 1 & 2 (64B, 256B and 1KB)
Priorities 3 & 4 (4KB, 8KB, 16KB, 64KB, 128KB and 256KB)
Priorities 5 & 6 (512KB and 1MB)
By default, ConnectX-5 maps all pfc enabled priorities to a single
lossless fixed buffer size of 50% of total available buffer space. The
other 50% is assigned to lossy buffer. Using dcbnl buffer attribute,
we create three equal size lossless buffers. Each buffer has 25% of total
available buffer space. Thus, the lossy buffer size reduces to 25%. Priority
to lossless buffer mappings are set as follow.
Priorities 1 & 2 on lossless buffer #1
Priorities 3 & 4 on lossless buffer #2
Priorities 5 & 6 on lossless buffer #3
We observe improvements in latency for small and medium message sizes
as follows. Please note that the large message sizes bandwidth performance is
reduced but the total bandwidth remains the same.
256B message size (42 % latency reduction)
4K message size (21% latency reduction)
64K message size (16% latency reduction)
CC: Ido Schimmel <idosch@idosch.org>
CC: Jakub Kicinski <jakub.kicinski@netronome.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Or Gerlitz <gerlitz.or@gmail.com>
CC: Parav Pandit <parav@mellanox.com>
CC: Aron Silverton <aron.silverton@oracle.com>
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This patch adds the End.BPF action to the LWT seg6local infrastructure.
This action works like any other seg6local End action, meaning that an IPv6
header with SRH is needed, whose DA has to be equal to the SID of the
action. It will also advance the SRH to the next segment, the BPF program
does not have to take care of this.
Since the BPF program may not be a source of instability in the kernel, it
is important to ensure that the integrity of the packet is maintained
before yielding it back to the IPv6 layer. The hook hence keeps track if
the SRH has been altered through the helpers, and re-validates its
content if needed with seg6_validate_srh. The state kept for validation is
stored in a per-CPU buffer. The BPF program is not allowed to directly
write into the packet, and only some fields of the SRH can be altered
through the helper bpf_lwt_seg6_store_bytes.
Performances profiling has shown that the SRH re-validation does not induce
a significant overhead. If the altered SRH is deemed as invalid, the packet
is dropped.
This validation is also done before executing any action through
bpf_lwt_seg6_action, and will not be performed again if the SRH is not
modified after calling the action.
The BPF program may return 3 types of return codes:
- BPF_OK: the End.BPF action will look up the next destination through
seg6_lookup_nexthop.
- BPF_REDIRECT: if an action has been executed through the
bpf_lwt_seg6_action helper, the BPF program should return this
value, as the skb's destination is already set and the default
lookup should not be performed.
- BPF_DROP : the packet will be dropped.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The BPF seg6local hook should be powerful enough to enable users to
implement most of the use-cases one could think of. After some thinking,
we figured out that the following actions should be possible on a SRv6
packet, requiring 3 specific helpers :
- bpf_lwt_seg6_store_bytes: Modify non-sensitive fields of the SRH
- bpf_lwt_seg6_adjust_srh: Allow to grow or shrink a SRH
(to add/delete TLVs)
- bpf_lwt_seg6_action: Apply some SRv6 network programming actions
(specifically End.X, End.T, End.B6 and
End.B6.Encap)
The specifications of these helpers are provided in the patch (see
include/uapi/linux/bpf.h).
The non-sensitive fields of the SRH are the following : flags, tag and
TLVs. The other fields can not be modified, to maintain the SRH
integrity. Flags, tag and TLVs can easily be modified as their validity
can be checked afterwards via seg6_validate_srh. It is not allowed to
modify the segments directly. If one wants to add segments on the path,
he should stack a new SRH using the End.B6 action via
bpf_lwt_seg6_action.
Growing, shrinking or editing TLVs via the helpers will flag the SRH as
invalid, and it will have to be re-validated before re-entering the IPv6
layer. This flag is stored in a per-CPU buffer, along with the current
header length in bytes.
Storing the SRH len in bytes in the control block is mandatory when using
bpf_lwt_seg6_adjust_srh. The Header Ext. Length field contains the SRH
len rounded to 8 bytes (a padding TLV can be inserted to ensure the 8-bytes
boundary). When adding/deleting TLVs within the BPF program, the SRH may
temporary be in an invalid state where its length cannot be rounded to 8
bytes without remainder, hence the need to store the length in bytes
separately. The caller of the BPF program can then ensure that the SRH's
final length is valid using this value. Again, a final SRH modified by a
BPF program which doesn’t respect the 8-bytes boundary will be discarded
as it will be considered as invalid.
Finally, a fourth helper is provided, bpf_lwt_push_encap, which is
available from the LWT BPF IN hook, but not from the seg6local BPF one.
This helper allows to encapsulate a Segment Routing Header (either with
a new outer IPv6 header, or by inlining it directly in the existing IPv6
header) into a non-SRv6 packet. This helper is required if we want to
offer the possibility to dynamically encapsulate a SRH for non-SRv6 packet,
as the BPF seg6local hook only works on traffic already containing a SRH.
This is the BPF equivalent of the seg6 LWT infrastructure, which achieves
the same purpose but with a static SRH per route.
These helpers require CONFIG_IPV6=y (and not =m).
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds new two new fields to struct bpf_prog_info. For
multi-function programs, these fields can be used to pass
a list of the JITed image lengths of each function for a
given program to userspace using the bpf system call with
the BPF_OBJ_GET_INFO_BY_FD command.
This can be used by userspace applications like bpftool
to split up the contiguous JITed dump, also obtained via
the system call, into more relatable chunks corresponding
to each function.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds new two new fields to struct bpf_prog_info. For
multi-function programs, these fields can be used to pass
a list of kernel symbol addresses for all functions in a
given program to userspace using the bpf system call with
the BPF_OBJ_GET_INFO_BY_FD command.
When bpf_jit_kallsyms is enabled, we can get the address
of the corresponding kernel symbol for a callee function
and resolve the symbol's name. The address is determined
by adding the value of the call instruction's imm field
to __bpf_call_base. This offset gets assigned to the imm
field by the verifier.
For some architectures, such as powerpc64, the imm field
is not large enough to hold this offset.
We resolve this by:
[1] Assigning the subprog id to the imm field of a call
instruction in the verifier instead of the offset of
the callee's symbol's address from __bpf_call_base.
[2] Determining the address of a callee's corresponding
symbol by using the imm field as an index for the
list of kernel symbol addresses now available from
the program info.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next
tree, they are:
1) Remove obsolete nf_log tracing from nf_tables, from Florian Westphal.
2) Add support for map lookups to numgen, random and hash expressions,
from Laura Garcia.
3) Allow to register nat hooks for iptables and nftables at the same
time. Patchset from Florian Westpha.
4) Timeout support for rbtree sets.
5) ip6_rpfilter works needs interface for link-local addresses, from
Vincent Bernat.
6) Add nf_ct_hook and nf_nat_hook structures and use them.
7) Do not drop packets on packets raceing to insert conntrack entries
into hashes, this is particularly a problem in nfqueue setups.
8) Address fallout from xt_osf separation to nf_osf, patches
from Florian Westphal and Fernando Mancera.
9) Remove reference to struct nft_af_info, which doesn't exist anymore.
From Taehee Yoo.
This batch comes with is a conflict between 25fd386e0b ("netfilter:
core: add missing __rcu annotation") in your tree and 2c205dd398
("netfilter: add struct nf_nat_hook and use it") coming in this batch.
This conflict can be solved by leaving the __rcu tag on
__netfilter_net_init() - added by 25fd386e0b - and remove all code
related to nf_nat_decode_session_hook - which is gone after
2c205dd398, as described by:
diff --cc net/netfilter/core.c
index e0ae4aae96f5,206fb2c4c319..168af54db975
--- a/net/netfilter/core.c
+++ b/net/netfilter/core.c
@@@ -611,7 -580,13 +611,8 @@@ const struct nf_conntrack_zone nf_ct_zo
EXPORT_SYMBOL_GPL(nf_ct_zone_dflt);
#endif /* CONFIG_NF_CONNTRACK */
- static void __net_init __netfilter_net_init(struct nf_hook_entries **e, int max)
-#ifdef CONFIG_NF_NAT_NEEDED
-void (*nf_nat_decode_session_hook)(struct sk_buff *, struct flowi *);
-EXPORT_SYMBOL(nf_nat_decode_session_hook);
-#endif
-
+ static void __net_init
+ __netfilter_net_init(struct nf_hook_entries __rcu **e, int max)
{
int h;
I can also merge your net-next tree into nf-next, solve the conflict and
resend the pull request if you prefer so.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* a fix for a race in aggregation, which I want to let
bake for a bit longer before sending to stable
* some new statistics (ACK RSSI, TXQ)
* TXQ configuration
* preparations for HE, particularly radiotap
* replace confusing "country IE" by "country element" since it's
not referring to Ireland
Note that I merged net-next to get a fix from mac80211 that got
there via net, to apply one patch that would otherwise conflict.
-----BEGIN PGP SIGNATURE-----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=G98y
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2018-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
For this round, we have various things all over the place, notably
* a fix for a race in aggregation, which I want to let
bake for a bit longer before sending to stable
* some new statistics (ACK RSSI, TXQ)
* TXQ configuration
* preparations for HE, particularly radiotap
* replace confusing "country IE" by "country element" since it's
not referring to Ireland
Note that I merged net-next to get a fix from mac80211 that got
there via net, to apply one patch that would otherwise conflict.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a followup to fib rules sport, dport and ipproto
match support. Only supports tcp, udp and icmp for ipproto.
Used by fib rule self tests.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bpfilter.ko consists of bpfilter_kern.c (normal kernel module code)
and user mode helper code that is embedded into bpfilter.ko
The steps to build bpfilter.ko are the following:
- main.c is compiled by HOSTCC into the bpfilter_umh elf executable file
- with quite a bit of objcopy and Makefile magic the bpfilter_umh elf file
is converted into bpfilter_umh.o object file
with _binary_net_bpfilter_bpfilter_umh_start and _end symbols
Example:
$ nm ./bld_x64/net/bpfilter/bpfilter_umh.o
0000000000004cf8 T _binary_net_bpfilter_bpfilter_umh_end
0000000000004cf8 A _binary_net_bpfilter_bpfilter_umh_size
0000000000000000 T _binary_net_bpfilter_bpfilter_umh_start
- bpfilter_umh.o and bpfilter_kern.o are linked together into bpfilter.ko
bpfilter_kern.c is a normal kernel module code that calls
the fork_usermode_blob() helper to execute part of its own data
as a user mode process.
Notice that _binary_net_bpfilter_bpfilter_umh_start - end
is placed into .init.rodata section, so it's freed as soon as __init
function of bpfilter.ko is finished.
As part of __init the bpfilter.ko does first request/reply action
via two unix pipe provided by fork_usermode_blob() helper to
make sure that umh is healthy. If not it will kill it via pid.
Later bpfilter_process_sockopt() will be called from bpfilter hooks
in get/setsockopt() to pass iptable commands into umh via bpfilter.ko
If admin does 'rmmod bpfilter' the __exit code bpfilter.ko will
kill umh as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In "struct bpf_map_info", the name "btf_id", "btf_key_id" and "btf_value_id"
could cause confusion because the "id" of "btf_id" means the BPF obj id
given to the BTF object while
"btf_key_id" and "btf_value_id" means the BTF type id within
that BTF object.
To make it clear, btf_key_id and btf_value_id are
renamed to btf_key_type_id and btf_value_type_id.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch does the followings:
1. Limit BTF_MAX_TYPES and BTF_MAX_NAME_OFFSET to 64k. We can
raise it later.
2. Remove the BTF_TYPE_PARENT and BTF_STR_TBL_ELF_ID. They are
currently encoded at the highest bit of a u32.
It is because the current use case does not require supporting
parent type (i.e type_id referring to a type in another BTF file).
It also does not support referring to a string in ELF.
The BTF_TYPE_PARENT and BTF_STR_TBL_ELF_ID checks are replaced
by BTF_TYPE_ID_CHECK and BTF_STR_OFFSET_CHECK which are
defined in btf.c instead of uapi/linux/btf.h.
3. Limit the BTF_INFO_KIND from 5 bits to 4 bits which is enough.
There is unused bits headroom if we ever needed it later.
4. The root bit in BTF_INFO is also removed because it is not
used in the current use case.
5. Remove BTF_INT_VARARGS since func type is not supported now.
The BTF_INT_ENCODING is limited to 4 bits instead of 8 bits.
The above can be added back later because the verifier
ensures the unused bits are zeros.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are currently unused section descriptions in the btf_header. Those
sections are here to support future BTF use cases. For example, the
func section (func_off) is to support function signature (e.g. the BPF
prog function signature).
Instead of spelling out all potential sections up-front in the btf_header.
This patch makes changes to btf_header such that extending it (e.g. adding
a section) is possible later. The unused ones can be removed for now and
they can be added back later.
This patch:
1. adds a hdr_len to the btf_header. It will allow adding
sections (and other info like parent_label and parent_name)
later. The check is similar to the existing bpf_attr.
If a user passes in a longer hdr_len, the kernel
ensures the extra tailing bytes are 0.
2. allows the section order in the BTF object to be
different from its sec_off order in btf_header.
3. each sec_off is followed by a sec_len. It must not have gap or
overlapping among sections.
The string section is ensured to be at the end due to the 4 bytes
alignment requirement of the type section.
The above changes will allow enough flexibility to
add new sections (and other info) to the btf_header later.
This patch also removes an unnecessary !err check
at the end of btf_parse().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use NL80211_CMD_UPDATE_CONNECT_PARAMS to update new ERP information,
Association IEs and the Authentication type to driver / firmware which
will be used in subsequent roamings.
Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org>
[arend: extended fils-sk kernel doc and added check in wiphy_register()]
Reviewed-by: Jithu Jance <jithu.jance@broadcom.com>
Reviewed-by: Eylon Pedinovsky <eylon.pedinovsky@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case of FILS shared key offload the parameters can change
upon roaming of which user-space needs to be notified.
Reviewed-by: Jithu Jance <jithu.jance@broadcom.com>
Reviewed-by: Eylon Pedinovsky <eylon.pedinovsky@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Bring in net-next which had pulled in net, so I have the changes
from mac80211 and can apply a patch that would otherwise conflict.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In this commit we remove the explicit ring structure from the the
uapi. It is tricky for an uapi to depend on a certain L1 cache line
size, since it can differ for variants of the same architecture. Now,
we let the user application determine the offsets of the producer,
consumer and descriptors by asking the socket via getsockopt.
A typical flow would be (Rx ring):
struct xdp_mmap_offsets off;
struct xdp_desc *ring;
u32 *prod, *cons;
void *map;
...
getsockopt(fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);
map = mmap(NULL, off.rx.desc +
NUM_DESCS * sizeof(struct xdp_desc),
PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_POPULATE, sfd,
XDP_PGOFF_RX_RING);
prod = map + off.rx.producer;
cons = map + off.rx.consumer;
ring = map + off.rx.desc;
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Move the sxdp_flags up, avoiding a hole in the uapi structure.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This set enables IOMMU support in the gr2d and gr3d drivers and adds
support for the zpos property on older Tegra generations. It also
enables scaling filters and incorporates some rework to eliminate a
private wrapper around struct drm_framebuffer.
The remainder is mostly a random assortment of fixes and cleanups, as
well as some preparatory work for destaging the userspace ABI, which
is almost ready and is targetted for v4.19-rc1.
-----BEGIN PGP SIGNATURE-----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=IKwO
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.18-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.18-rc1
This set enables IOMMU support in the gr2d and gr3d drivers and adds
support for the zpos property on older Tegra generations. It also
enables scaling filters and incorporates some rework to eliminate a
private wrapper around struct drm_framebuffer.
The remainder is mostly a random assortment of fixes and cleanups, as
well as some preparatory work for destaging the userspace ABI, which
is almost ready and is targetted for v4.19-rc1.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Sat 19 May 2018 08:31:00 AEST
# gpg: using RSA key DD23ACD77F3EB3A1
# gpg: Can't check signature: public key not found
Link: https://patchwork.freedesktop.org/patch/msgid/20180518224523.30982-1-thierry.reding@gmail.com
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge speculative store buffer bypass fixes from Thomas Gleixner:
- rework of the SPEC_CTRL MSR management to accomodate the new fancy
SSBD (Speculative Store Bypass Disable) bit handling.
- the CPU bug and sysfs infrastructure for the exciting new Speculative
Store Bypass 'feature'.
- support for disabling SSB via LS_CFG MSR on AMD CPUs including
Hyperthread synchronization on ZEN.
- PRCTL support for dynamic runtime control of SSB
- SECCOMP integration to automatically disable SSB for sandboxed
processes with a filter flag for opt-out.
- KVM integration to allow guests fiddling with SSBD including the new
software MSR VIRT_SPEC_CTRL to handle the LS_CFG based oddities on
AMD.
- BPF protection against SSB
.. this is just the core and x86 side, other architecture support will
come separately.
* 'speck-v20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
bpf: Prevent memory disambiguation attack
x86/bugs: Rename SSBD_NO to SSB_NO
KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBD
x86/speculation, KVM: Implement support for VIRT_SPEC_CTRL/LS_CFG
x86/bugs: Rework spec_ctrl base and mask logic
x86/bugs: Remove x86_spec_ctrl_set()
x86/bugs: Expose x86_spec_ctrl_base directly
x86/bugs: Unify x86_spec_ctrl_{set_guest,restore_host}
x86/speculation: Rework speculative_store_bypass_update()
x86/speculation: Add virtualized speculative store bypass disable support
x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRL
x86/speculation: Handle HT correctly on AMD
x86/cpufeatures: Add FEATURE_ZEN
x86/cpufeatures: Disentangle SSBD enumeration
x86/cpufeatures: Disentangle MSR_SPEC_CTRL enumeration from IBRS
x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP
KVM: SVM: Move spec control call after restore of GS
x86/cpu: Make alternative_msr_write work for 32-bit code
x86/bugs: Fix the parameters alignment and missing void
x86/bugs: Make cpu_show_common() static
...
fscrypt currently only supports AES encryption. However, many low-end
mobile devices have older CPUs that don't have AES instructions, e.g.
the ARMv8 Cryptography Extensions. Currently, user data on such devices
is not encrypted at rest because AES is too slow, even when the NEON
bit-sliced implementation of AES is used. Unfortunately, it is
infeasible to encrypt these devices at all when AES is the only option.
Therefore, this patch updates fscrypt to support the Speck block cipher,
which was recently added to the crypto API. The C implementation of
Speck is not especially fast, but Speck can be implemented very
efficiently with general-purpose vector instructions, e.g. ARM NEON.
For example, on an ARMv7 processor, we measured the NEON-accelerated
Speck128/256-XTS at 69 MB/s for both encryption and decryption, while
AES-256-XTS with the NEON bit-sliced implementation was only 22 MB/s
encryption and 19 MB/s decryption.
There are multiple variants of Speck. This patch only adds support for
Speck128/256, which is the variant with a 128-bit block size and 256-bit
key size -- the same as AES-256. This is believed to be the most secure
variant of Speck, and it's only about 6% slower than Speck128/128.
Speck64/128 would be at least 20% faster because it has 20% rounds, and
it can be even faster on CPUs that can't efficiently do the 64-bit
operations needed for Speck128. However, Speck64's 64-bit block size is
not preferred security-wise. ARM NEON also supports the needed 64-bit
operations even on 32-bit CPUs, resulting in Speck128 being fast enough
for our targeted use cases so far.
The chosen modes of operation are XTS for contents and CTS-CBC for
filenames. These are the same modes of operation that fscrypt defaults
to for AES. Note that as with the other fscrypt modes, Speck will not
be used unless userspace chooses to use it. Nor are any of the existing
modes (which are all AES-based) being removed, of course.
We intentionally don't make CONFIG_FS_ENCRYPTION select
CONFIG_CRYPTO_SPECK, so people will have to enable Speck support
themselves if they need it. This is because we shouldn't bloat the
FS_ENCRYPTION dependencies with every new cipher, especially ones that
aren't recommended for most users. Moreover, CRYPTO_SPECK is just the
generic implementation, which won't be fast enough for many users; in
practice, they'll need to enable CRYPTO_SPECK_NEON to get acceptable
performance.
More details about our choice of Speck can be found in our patches that
added Speck to the crypto API, and the follow-on discussion threads.
We're planning a publication that explains the choice in more detail.
But briefly, we can't use ChaCha20 as we previously proposed, since it
would be insecure to use a stream cipher in this context, with potential
IV reuse during writes on f2fs and/or on wear-leveling flash storage.
We also evaluated many other lightweight and/or ARX-based block ciphers
such as Chaskey-LTS, RC5, LEA, CHAM, Threefish, RC6, NOEKEON, SPARX, and
XTEA. However, all had disadvantages vs. Speck, such as insufficient
performance with NEON, much less published cryptanalysis, or an
insufficient security level. Various design choices in Speck make it
perform better with NEON than competing ciphers while still having a
security margin similar to AES, and in the case of Speck128 also the
same available security levels. Unfortunately, Speck does have some
political baggage attached -- it's an NSA designed cipher, and was
rejected from an ISO standard (though for context, as far as I know none
of the above-mentioned alternatives are ISO standards either).
Nevertheless, we believe it is a good solution to the problem from a
technical perspective.
Certain algorithms constructed from ChaCha or the ChaCha permutation,
such as MEM (Masked Even-Mansour) or HPolyC, may also meet our
performance requirements. However, these are new constructions that
need more time to receive the cryptographic review and acceptance needed
to be confident in their security. HPolyC hasn't been published yet,
and we are concerned that MEM makes stronger assumptions about the
underlying permutation than the ChaCha stream cipher does. In contrast,
the XTS mode of operation is relatively well accepted, and Speck has
over 70 cryptanalysis papers. Of course, these ChaCha-based algorithms
can still be added later if they become ready.
The best known attack on Speck128/256 is a differential cryptanalysis
attack on 25 of 34 rounds with 2^253 time complexity and 2^125 chosen
plaintexts, i.e. only marginally faster than brute force. There is no
known attack on the full 34 rounds.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Devlink ports can have specific flavour according to the purpose of use.
This patch extend attrs_set so the driver can say which flavour port
has. Initial flavours are:
physical, cpu, dsa
User can query this to see right away what is the purpose of each port.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change existing setter for split port information into more generic
attrs setter. Alongside with that, allow to set port number and subport
number for split ports.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the userspace ABI with kerneldoc to provide some information on
how to use it.
v3:
- reword description of arrays and array lengths
v2:
- keep GEM object creation flags for ABI compatibility
- fix typo in struct drm_tegra_syncpt_incr kerneldoc
- fix typos in struct drm_tegra_submit kerneldoc
- reworded some descriptions as suggested
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently sk_msg programs only have access to the raw data. However,
it is often useful when building policies to have the policies specific
to the socket endpoint. This allows using the socket tuple as input
into filters, etc.
This patch adds ctx access to the sock fields.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
A separate data structure exists for the DRM_TEGRA_CLOSE_CHANNEL IOCTL,
but it is currently unused. The IOCTL was using the data structure for
the DRM_TEGRA_OPEN_CHANNEL IOCTL.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sites may wish to provide additional metadata alongside files in order
to make more fine-grained security decisions[1]. The security of this is
enhanced if this metadata is protected, something that EVM makes
possible. However, the kernel cannot know about the set of extended
attributes that local admins may wish to protect, and hardcoding this
policy in the kernel makes it difficult to change over time and less
convenient for distributions to enable.
This patch adds a new /sys/kernel/security/integrity/evm/evm_xattrs node,
which can be read to obtain the current set of EVM-protected extended
attributes or written to in order to add new entries. Extending this list
will not change the validity of any existing signatures provided that the
file in question does not have any of the additional extended attributes -
missing xattrs are skipped when calculating the EVM hash.
[1] For instance, a package manager could install information about the
package uploader in an additional extended attribute. Local LSM policy
could then be associated with that extended attribute in order to
restrict the privileges available to packages from less trusted
uploaders.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This counter tracks number of ACK packets that the host has not sent,
thanks to ACK compression.
Sample output :
$ nstat -n;sleep 1;nstat|egrep "IpInReceives|IpOutRequests|TcpInSegs|TcpOutSegs|TcpExtTCPAckCompressed"
IpInReceives 123250 0.0
IpOutRequests 3684 0.0
TcpInSegs 123251 0.0
TcpOutSegs 3684 0.0
TcpExtTCPAckCompressed 119252 0.0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up SPDX-License-Identifier and removing licensing leftovers.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
wiphy names were recently limited to 128 bytes by commit a7cfebcb75
("cfg80211: limit wiphy names to 128 bytes"). As it turns out though,
this isn't sufficient because dev_vprintk_emit() needs the syslog header
string "SUBSYSTEM=ieee80211\0DEVICE=+ieee80211:$devname" to fit into 128
bytes. This triggered the "device/subsystem name too long" WARN when
the device name was >= 90 bytes. As before, this was reproduced by
syzbot by sending an HWSIM_CMD_NEW_RADIO command to the MAC80211_HWSIM
generic netlink family.
Fix it by further limiting wiphy names to 64 bytes.
Reported-by: syzbot+e64565577af34b3768dc@syzkaller.appspotmail.com
Fixes: a7cfebcb75 ("cfg80211: limit wiphy names to 128 bytes")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-----BEGIN PGP SIGNATURE-----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=4NJV
-----END PGP SIGNATURE-----
Merge drm-fixes-for-v4.17-rc6-urgent into drm-next
Need to backmerge some nouveau fixes to reduce
the nouveau -next conflicts a lot.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch creates new attributes to accept a map as argument and
then perform the lookup with the generated hash accordingly.
Both current hash functions are supported: Jenkins and Symmetric Hash.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stephen Rothwell says:
today's linux-next build (x86_64 allmodconfig) produced this warning:
./usr/include/linux/netfilter/nf_osf.h:25: found __[us]{8,16,32,64} type without #include <linux/types.h>
Fix that up and also move kernel-private struct out of uapi (it was not
exposed in any released kernel version).
tested via allmodconfig build + make headers_check.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: bfb15f2a95 ("netfilter: extract Passive OS fingerprint infrastructure from xt_osf")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch reports the device's capbilities to offload
encapsulated MPLS tunnel protocols to user-space:
- Capability to offload MPLS over GRE.
- Capability to offload MPLS over UDP.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add ib_uverbs_flow_spec_mpls to define a rule to match the MPLS
protocol.
The spec includes the generic specs header, type, size and reserved
fields while the filter itself is defined as ib_uverbs_flow_mpls_filter
and includes a single 32bit field named 'label' which consists of:
Bits 0:19 - The MPLS label.
Bits 20:22 - Traffic class field.
Bit 23 - Bottom of stack bit.
Bits 24:31 - Time to live (TTL) field.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add ib_uverbs_flow_spec_gre to define a rule to match the GRE
encapsulation protocol.
The spec includes the generic specs header, type, size and reserved
fields while the filter itself is defined as ib_uverbs_flow_gre_filter
and includes:
1. Checksum present bit, key present bit and version bits in a single
16bit field.
2. Protocol type field - Indicates the ether protocol type of the
encapsulated payload.
3. Key field - present if key bit is set and contains an application
specific key value.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-05-17
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Provide a new BPF helper for doing a FIB and neighbor lookup
in the kernel tables from an XDP or tc BPF program. The helper
provides a fast-path for forwarding packets. The API supports
IPv4, IPv6 and MPLS protocols, but currently IPv4 and IPv6 are
implemented in this initial work, from David (Ahern).
2) Just a tiny diff but huge feature enabled for nfp driver by
extending the BPF offload beyond a pure host processing offload.
Offloaded XDP programs are allowed to set the RX queue index and
thus opening the door for defining a fully programmable RSS/n-tuple
filter replacement. Once BPF decided on a queue already, the device
data-path will skip the conventional RSS processing completely,
from Jakub.
3) The original sockmap implementation was array based similar to
devmap. However unlike devmap where an ifindex has a 1:1 mapping
into the map there are use cases with sockets that need to be
referenced using longer keys. Hence, sockhash map is added reusing
as much of the sockmap code as possible, from John.
4) Introduce BTF ID. The ID is allocatd through an IDR similar as
with BPF maps and progs. It also makes BTF accessible to user
space via BPF_BTF_GET_FD_BY_ID and adds exposure of the BTF data
through BPF_OBJ_GET_INFO_BY_FD, from Martin.
5) Enable BPF stackmap with build_id also in NMI context. Due to the
up_read() of current->mm->mmap_sem build_id cannot be parsed.
This work defers the up_read() via a per-cpu irq_work so that
at least limited support can be enabled, from Song.
6) Various BPF JIT follow-up cleanups and fixups after the LD_ABS/LD_IND
JIT conversion as well as implementation of an optimized 32/64 bit
immediate load in the arm64 JIT that allows to reduce the number of
emitted instructions; in case of tested real-world programs they
were shrinking by three percent, from Daniel.
7) Add ifindex parameter to the libbpf loader in order to enable
BPF offload support. Right now only iproute2 can load offloaded
BPF and this will also enable libbpf for direct integration into
other applications, from David (Beckett).
8) Convert the plain text documentation under Documentation/bpf/ into
RST format since this is the appropriate standard the kernel is
moving to for all documentation. Also add an overview README.rst,
from Jesper.
9) Add __printf verification attribute to the bpf_verifier_vlog()
helper. Though it uses va_list we can still allow gcc to check
the format string, from Mathieu.
10) Fix a bash reference in the BPF selftest's Makefile. The '|& ...'
is a bash 4.0+ feature which is not guaranteed to be available
when calling out to shell, therefore use a more portable variant,
from Joe.
11) Fix a 64 bit division in xdp_umem_reg() by using div_u64()
instead of relying on the gcc built-in, from Björn.
12) Fix a sock hashmap kmalloc warning reported by syzbot when an
overly large key size is used in hashmap then causing overflows
in htab->elem_size. Reject bogus attr->key_size early in the
sock_hash_alloc(), from Yonghong.
13) Ensure in BPF selftests when urandom_read is being linked that
--build-id is always enabled so that test_stacktrace_build_id[_nmi]
won't be failing, from Alexei.
14) Add bitsperlong.h as well as errno.h uapi headers into the tools
header infrastructure which point to one of the arch specific
uapi headers. This was needed in order to fix a build error on
some systems for the BPF selftests, from Sirio.
15) Allow for short options to be used in the xdp_monitor BPF sample
code. And also a bpf.h tools uapi header sync in order to fix a
selftest build failure. Both from Prashant.
16) More formally clarify the meaning of ID in the direct packet access
section of the BPF documentation, from Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This retains 256 chars as the maximum size through the interface, which
is the btrfs limit and AFAIK exceeds any other filesystem's maximum
label size.
This just copies the ioctl for now and leaves it in place for btrfs
for the time being. A later patch will allow btrfs to use the new
common ioctl definition, but it may be sent after this is merged.
(Note, Reviewed-by's were originally given for the combined vfs+btrfs
patch, some license taken here.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Main changes for 4.18. I'd like to do a separate pull for vega20 later
this week or next. Highlights:
- Reserve pre-OS scanout buffer during init for seemless transition from
console to driver
- VEGAM support
- Improved GPU scheduler documentation
- Initial gfxoff support for raven
- SR-IOV fixes
- Default to non-AGP on PowerPC for radeon
- Fine grained clock voltage control for vega10
- Power profiles for vega10
- Further clean up of powerplay/driver interface
- Underlay fixes
- Display link bw updates
- Gamma fixes
- Scatter/Gather display support on CZ/ST
- Misc bug fixes and clean ups
[airlied: fixup v3d vs scheduler API change]
Link: https://patchwork.freedesktop.org/patch/msgid/20180515185450.1113-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
During this merge window, we added support for addition RDMA netlink
operations. Unfortunately, we added the items in the middle of our uapi
enum. Fix that before final release.
Fixes: da5c850782 ("RDMA/nldev: add driver-specific resource
tracking")
Signed-off-by: Doug Ledford <dledford@redhat.com>
This change prepares for a workaround in amdkfd for a GFX9 HW bug. It
requires the control stack memory of compute queues, which is allocated
from the second page of MQD gart BOs, to have mtype NC, rather than
the default UC.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RLC save/restore list cntl/gpm_mem/srm_mem ucodes are used for CGPG and gfxoff
function.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a new IB flag that enables this new behavior.
Full invalidation is unnecessary for RELEASE_MEM and doesn't make sense
when draw calls from two adjacent gfx IBs run in parallel. This will be
the new default for Mesa.
v2: bump the version
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if domain is illegal, we should return error.
v2:
remove duplicated domain checking.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 6f51d28bfe8e1a676de5cd877639245bed3cc818.
Makes fallback handling to complicated. This is just a feature for the
GEM interface and shouldn't leak into the core BO create function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sockmap is currently backed by an array and enforces keys to be
four bytes. This works well for many use cases and was originally
modeled after devmap which also uses four bytes keys. However,
this has become limiting in larger use cases where a hash would
be more appropriate. For example users may want to use the 5-tuple
of the socket as the lookup key.
To support this add hash support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
UAPI Changes:
- Fix render node number regression from control node removal.
Driver Changes:
- Small header fix for virgl, used by qemu.
- Use vm_fault_t in qxl.
-----BEGIN PGP SIGNATURE-----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=LG6G
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-05-15' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.18:
UAPI Changes:
- Fix render node number regression from control node removal.
Driver Changes:
- Small header fix for virgl, used by qemu.
- Use vm_fault_t in qxl.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Tue 15 May 2018 06:16:03 PM AEST
# gpg: using RSA key FE558C72A67013C3
# gpg: Can't check signature: public key not found
Link: https://patchwork.freedesktop.org/patch/msgid/e63306b9-67a0-74ab-8883-08b3d9db72d2@mblankhorst.nl
This adds support for the MIXER UNIT in UAC3. All the information
is obtained from the (HIGH CAPABILITY) Cluster's header. We don't
read the rest of the logical cluster to obtain the channel config
as that wont make any difference in the current mixer behaviour.
The name of the mixer unit is not yet requested as there is not
support for the UAC3 Class Specific String requests.
Tested in an UAC3 device working as a HEADSET with a basic mixer
unit (same as the one in the BADD spec) with no controls.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Tested-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, when the rule is not to be exclusively executed by the
hardware, extack is not passed along and offloading failures don't
get logged. The idea was that hardware failures are okay because the
rule will get executed in software then and this way it doesn't confuse
unware users.
But this is not helpful in case one needs to understand why a certain
rule failed to get offloaded. Considering it may have been a temporary
failure, like resources exceeded or so, reproducing it later and knowing
that it is triggering the same reason may be challenging.
The ultimate goal is to improve Open vSwitch debuggability when using
flower offloading.
This patch adds a new flag to enable verbose logging. With the flag set,
extack will be passed to the driver, which will be able to log the
error. As the operation itself probably won't fail (not because of this,
at least), current iproute will already log it as a Warning.
The flag is generic, so it can be reused later. No need to restrict it
just for HW offloading. The command line will follow the syntax that
tc-ebpf already uses, tc ... [ verbose ] ... , and extend its meaning.
For example:
# ./tc qdisc add dev p7p1 ingress
# ./tc filter add dev p7p1 parent ffff: protocol ip prio 1 \
flower verbose \
src_mac ed:13:db:00:00:00 dst_mac 01:80:c2:00:00:d0 \
src_ip 56.0.0.0 dst_ip 55.0.0.0 action drop
Warning: TC offload is disabled on net device.
# echo $?
0
# ./tc filter add dev p7p1 parent ffff: protocol ip prio 1 \
flower \
src_mac ff:13:db:00:00:00 dst_mac 01:80:c2:00:00:d0 \
src_ip 56.0.0.0 dst_ip 55.0.0.0 action drop
# echo $?
0
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a macro, "AUDIT_SID_UNSET", to replace each instance of
initialization and comparison to an audit session ID.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The sequence of actions done by device drivers to append their device
specific hardware/firmware logs to /proc/vmcore are as follows:
1. During probe (before hardware is initialized), device drivers
register to the vmcore module (via vmcore_add_device_dump()), with
callback function, along with buffer size and log name needed for
firmware/hardware log collection.
2. vmcore module allocates the buffer with requested size. It adds
an Elf note and invokes the device driver's registered callback
function.
3. Device driver collects all hardware/firmware logs into the buffer
and returns control back to vmcore module.
Ensure that the device dump buffer size is always aligned to page size
so that it can be mmaped.
Also, rename alloc_elfnotes_buf() to vmcore_alloc_buf() to make it more
generic and reserve NT_VMCOREDD note type to indicate vmcore device
dump.
Suggested-by: Eric Biederman <ebiederm@xmission.com>.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A commit 08f9f4485f ('ALSA: core api: define offsets for TLV items')
introduced a series of macro for offset of db-scale type of TLV, however
there are some types of TLV to add similar macros.
This commit complements macros for offset of db-minmax and db-linear types
of TLV data.
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
My recent Xen patch series introduces a new HYPERVISOR_memory_op to
support direct priv-mapping of certain guest resources (such as ioreq
pages, used by emulators) by a tools domain, rather than having to access
such resources via the guest P2M.
This patch adds the necessary infrastructure to the privcmd driver and
Xen MMU code to support direct resource mapping.
NOTE: The adjustment in the MMU code is partially cosmetic. Xen will now
allow a PV tools domain to map guest pages either by GFN or MFN, thus
the term 'mfn' has been swapped for 'pfn' in the lower layers of the
remap code.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Although the kernel doesn't use this, qemu imports these headers
and it's best to keep them consistent.
This define is also something userspace may want to use.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180503021021.10694-1-airlied@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:
1) Fix handling of simultaneous open TCP connection in conntrack,
from Jozsef Kadlecsik.
2) Insufficient sanitify check of xtables extension names, from
Florian Westphal.
3) Skip unnecessary synchronize_rcu() call when transaction log
is already empty, from Florian Westphal.
4) Incorrect destination mac validation in ebt_stp, from Stephen
Hemminger.
5) xtables module reference counter leak in nft_compat, from
Florian Westphal.
6) Incorrect connection reference counting logic in IPVS
one-packet scheduler, from Julian Anastasov.
7) Wrong stats for 32-bits CPU in IPVS, also from Julian.
8) Calm down sparse error in netfilter core, also from Florian.
9) Use nla_strlcpy to fix compilation warning in nfnetlink_acct
and nfnetlink_cthelper, again from Florian.
10) Missing module alias in icmp and icmp6 xtables extensions,
from Florian Westphal.
11) Base chain statistics in nf_tables may be unset/null, from Florian.
12) Fix handling of large matchinfo size in nft_compat, this includes
one preparation for before this fix. From Florian.
13) Fix bogus EBUSY error when deleting chains due to incorrect reference
counting from the preparation phase of the two-phase commit protocol.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, there are no pre-defined accessors for the elements
in topology TLV data. In the absence of such offsets, the
tlv data will have to be decoded using hardwired offset
numbers 0-N depending on the type of TLV. This patch defines
accessor offsets for the type, length, min and mute/step items
in TLV data for DB_SCALE type tlv's. These will be used by drivers to
decode the TLV data while loading topology thereby improving
code readability. The type and len offsets are common for all TLV
types. The min and step/mute offsets are specific to DB_SCALE tlv type.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The bpf syscall and selftests conflicts were trivial
overlapping changes.
The r8169 change involved moving the added mdelay from 'net' into a
different function.
A TLS close bug fix overlapped with the splitting of the TLS state
into separate TX and RX parts. I just expanded the tests in the bug
fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf
== X".
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Verify lengths of keys provided by the user is AF_KEY, from Kevin
Easton.
2) Add device ID for BCM89610 PHY. Thanks to Bhadram Varka.
3) Add Spectre guards to some ATM code, courtesy of Gustavo A. R.
Silva.
4) Fix infinite loop in NSH protocol code. To Eric Dumazet we are most
grateful for this fix.
5) Line up /proc/net/netlink headers properly. This fix from YU Bo, we
do appreciate.
6) Use after free in TLS code. Once again we are blessed by the
honorable Eric Dumazet with this fix.
7) Fix regression in TLS code causing stalls on partial TLS records.
This fix is bestowed upon us by Andrew Tomt.
8) Deal with too small MTUs properly in LLC code, another great gift
from Eric Dumazet.
9) Handle cached route flushing properly wrt. MTU locking in ipv4, to
Hangbin Liu we give thanks for this.
10) Fix regression in SO_BINDTODEVIC handling wrt. UDP socket demux.
Paolo Abeni, he gave us this.
11) Range check coalescing parameters in mlx4 driver, thank you Moshe
Shemesh.
12) Some ipv6 ICMP error handling fixes in rxrpc, from our good brother
David Howells.
13) Fix kexec on mlx5 by freeing IRQs in shutdown path. Daniel Juergens,
you're the best!
14) Don't send bonding RLB updates to invalid MAC addresses. Debabrata
Benerjee saved us!
15) Uh oh, we were leaking in udp_sendmsg and ping_v4_sendmsg. The ship
is now water tight, thanks to Andrey Ignatov.
16) IPSEC memory leak in ixgbe from Colin Ian King, man we've got holes
everywhere!
17) Fix error path in tcf_proto_create, Jiri Pirko what would we do
without you!
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits)
net sched actions: fix refcnt leak in skbmod
net: sched: fix error path in tcf_proto_create() when modules are not configured
net sched actions: fix invalid pointer dereferencing if skbedit flags missing
ixgbe: fix memory leak on ipsec allocation
ixgbevf: fix ixgbevf_xmit_frame()'s return type
ixgbe: return error on unsupported SFP module when resetting
ice: Set rq_last_status when cleaning rq
ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg
mlxsw: core: Fix an error handling path in 'mlxsw_core_bus_device_register()'
bonding: send learning packets for vlans on slave
bonding: do not allow rlb updates to invalid mac
net/mlx5e: Err if asked to offload TC match on frag being first
net/mlx5: E-Switch, Include VF RDMA stats in vport statistics
net/mlx5: Free IRQs in shutdown path
rxrpc: Trace UDP transmission failure
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages
rxrpc: Fix the min security level for kernel calls
rxrpc: Fix error reception on AF_INET6 sockets
rxrpc: Fix missing start of call timeout
qed: fix spelling mistake: "taskelt" -> "tasklet"
...
HDMI 2.0/CEA-861-F introduces two new aspect ratios:
- 64:27
- 256:135
This patch:
- Adds new DRM flags for to represent these new aspect ratios.
- Adds new cases to handle these aspect ratios while converting
from user->kernel mode or vise versa.
This patch was once reviewed and merged, and later reverted due
to lack of DRM client protection, while adding aspect ratio bits
in user modes. This is a re-spin of the series, with DRM client
cap protection.
The previous series can be found here:
https://pw-emeril.freedesktop.org/series/10850/
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org> (V2)
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> (V2)
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
V3: rebase
V4: rebase
V5: corrected the macro name for an aspect ratio, in a switch case.
V6: rebase
V7: rebase
V8: rebase
V9: rebase
V10: rebase
V11: rebase
V12: rebase
V13: rebase
V14: rebase
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-11-git-send-email-ankit.k.nautiyal@intel.com
To enable aspect-ratio support in DRM, blindly exposing the aspect
ratio information along with mode, can break things in existing
non-atomic user-spaces which have no intention or support to use this
aspect ratio information.
To avoid this, a new drm client cap is required to enable a non-atomic
user-space to advertise if it supports modes with aspect-ratio. Based
on this cap value, the kernel will take a call on exposing the aspect
ratio info in modes or not.
This patch adds the client cap for aspect-ratio.
Since no atomic-userspaces blow up on receiving aspect-ratio
information, the client cap for aspect-ratio is always enabled
for atomic clients.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
V3: rebase
V4: As suggested by Marteen Lankhorst modified the commit message
explaining the need to use the DRM cap for aspect-ratio. Also,
tweaked the comment lines in the code for better understanding and
clarity, as recommended by Shashank Sharma.
V5: rebase
V6: rebase
V7: rebase
V8: rebase
V9: rebase
V10: rebase
V11: rebase
V12: As suggested by Daniel Vetter and Ville Syrjala,
always enable aspect-ratio client cap for atomic userspaces,
if no atomic userspace breaks on aspect-ratio bits.
V13: rebase
V14: rebase
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-7-git-send-email-ankit.k.nautiyal@intel.com
Provide a helper for doing a FIB and neighbor lookup in the kernel
tables from an XDP program. The helper provides a fastpath for forwarding
packets. If the packet is a local delivery or for any reason is not a
simple lookup and forward, the packet continues up the stack.
If it is to be forwarded, the forwarding can be done directly if the
neighbor is already known. If the neighbor does not exist, the first
few packets go up the stack for neighbor resolution. Once resolved, the
xdp program provides the fast path.
On successful lookup the nexthop dmac, current device smac and egress
device index are returned.
The API supports IPv4, IPv6 and MPLS protocols, but only IPv4 and IPv6
are implemented in this patch. The API includes layer 4 parameters if
the XDP program chooses to do deep packet inspection to allow compare
against ACLs implemented as FIB rules.
Header rewrite is left to the XDP program.
The lookup takes 2 flags:
- BPF_FIB_LOOKUP_DIRECT to do a lookup that bypasses FIB rules and goes
straight to the table associated with the device (expert setting for
those looking to maximize throughput)
- BPF_FIB_LOOKUP_OUTPUT to do a lookup from the egress perspective.
Default is an ingress lookup.
Initial performance numbers collected by Jesper, forwarded packets/sec:
Full stack XDP FIB lookup XDP Direct lookup
IPv4 1,947,969 7,074,156 7,415,333
IPv6 1,728,000 6,165,504 7,262,720
These number are single CPU core forwarding on a Broadwell
E5-1650 v4 @ 3.60GHz.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* WMM element validation
* SAE timeout
* add-BA timeout
* docbook parsing
* a few memory leaks in error paths
-----BEGIN PGP SIGNATURE-----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=mJ4m
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2018-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
We only have a few fixes this time:
* WMM element validation
* SAE timeout
* add-BA timeout
* docbook parsing
* a few memory leaks in error paths
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds Exynos IPP v2 subsystem and userspace API.
New userspace API is focused ONLY on memory-to-memory image processing.
The two remainging operation modes of obsolete IPP v1 API (framebuffer
writeback and local-path output with image processing) can be implemented
using standard DRM features: writeback connectors and additional DRM planes
with scaling features.
V2 IPP userspace API is based on stateless approach, which much better fits
to memory-to-memory image processing model. It also provides support for
all image formats, which are both already defined in DRM API and supported
by the existing IPP hardware modules.
The API consists of the following ioctls:
- DRM_IOCTL_EXYNOS_IPP_GET_RESOURCES: to enumerate all available image
processing modules,
- DRM_IOCTL_EXYNOS_IPP_GET_CAPS: to query capabilities and supported image
formats of given IPP module,
- DRM_IOCTL_EXYNOS_IPP_GET_LIMITS: to query hardware limitiations for
selected image format of given IPP module,
- DRM_IOCTL_EXYNOS_IPP_COMMIT: to perform operation described by the
provided structures (source and destination buffers, operation rectangle,
transformation, etc).
The proposed userspace API is extensible. In the future more advanced image
processing operations can be defined to support for example blending.
Userspace API is fully functional also on DRM render nodes, so it is not
limited to the root/privileged client.
Internal driver API also has been completely rewritten. New IPP core
performs all possible input validation, checks and object life-time
control. The drivers can focus only on writing configuration to hardware
registers. Stateless nature of DRM_IOCTL_EXYNOS_IPP_COMMIT ioctl simplifies
the driver API. Minimal driver needs to provide a single callback for
starting processing and an array with supported image formats.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Merge conflict so merged manually.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
C libraries with 64-bit time_t use an incompatible format for
struct omap3isp_stat_data. This changes the kernel code to
support either version, by moving over the normal handling
to the 64-bit variant, and adding compatiblity code to handle
the old binary format with the existing ioctl command code.
Fortunately, the command code includes the size of the structure,
so the difference gets handled automatically. In the process of
eliminating the references to 'struct timeval' from the kernel,
I also change the way the timestamp is generated internally,
basically by open-coding the v4l2_get_timestamp() call.
[Sakari Ailus: Alphabetical order of headers, clean up compat code]
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Several items of conflict have arisen between the RDMA stack's for-rc
branch and upcoming for-next work:
9fd4350ba8 ("IB/rxe: avoid double kfree_skb") directly conflicts with
2e47350789 ("IB/rxe: optimize the function duplicate_request")
Patches already submitted by Intel for the hfi1 driver will fail to
apply cleanly without this merge
Other people on the mailing list have notified that their upcoming
patches also fail to apply cleanly without this merge
Signed-off-by: Doug Ledford <dledford@redhat.com>
During BPF_OBJ_GET_INFO_BY_FD on a btf_fd, the current bpf_attr's
info.info is directly filled with the BTF binary data. It is
not extensible. In this case, we want to add BTF ID.
This patch adds "struct bpf_btf_info" which has the BTF ID as
one of its member. The BTF binary data itself is exposed through
the "btf" and "btf_size" members.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch gives an ID to each loaded BTF. The ID is allocated by
the idr like the existing prog-id and map-id.
The bpf_put(map->btf) is moved to __bpf_map_put() so that the
userspace can stop seeing the BTF ID ASAP when the last BTF
refcnt is gone.
It also makes BTF accessible from userspace through the
1. new BPF_BTF_GET_FD_BY_ID command. It is limited to CAP_SYS_ADMIN
which is inline with the BPF_BTF_LOAD cmd and the existing
BPF_[MAP|PROG]_GET_FD_BY_ID cmd.
2. new btf_id (and btf_key_id + btf_value_id) in "struct bpf_map_info"
Once the BTF ID handler is accessible from userspace, freeing a BTF
object has to go through a rcu period. The BPF_BTF_GET_FD_BY_ID cmd
can then be done under a rcu_read_lock() instead of taking
spin_lock.
[Note: A similar rcu usage can be done to the existing
bpf_prog_get_fd_by_id() in a follow up patch]
When processing the BPF_BTF_GET_FD_BY_ID cmd,
refcount_inc_not_zero() is needed because the BTF object
could be already in the rcu dead row . btf_get() is
removed since its usage is currently limited to btf.c
alone. refcount_inc() is used directly instead.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds support for exporting the mac80211 TXQ stats via nl80211 by
way of a nested TXQ stats attribute, as well as for configuring the
quantum and limits that were previously only changeable through debugfs.
This commit adds just the nl80211 API, a subsequent commit adds support to
mac80211 itself.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Minor conflict, a CHECK was placed into an if() statement
in net-next, whilst a newline was added to that CHECK
call in 'net'. Thanks to Daniel for the merge resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
Average ack rssi will be given to userspace via NL80211 interface
if firmware is capable. Userspace tool ‘iw’ can process this
information and give the output as one of the fields in
‘iw dev wlanX station dump’.
Example output :
localhost ~ #iw dev wlan-5000mhz station dump Station
34:f3:9a:aa:3b:29 (on wlan-5000mhz)
inactive time: 5370 ms
rx bytes: 85321
rx packets: 576
tx bytes: 14225
tx packets: 71
tx retries: 0
tx failed: 2
beacon loss: 0
rx drop misc: 0
signal: -54 dBm
signal avg: -53 dBm
tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
rx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
avg ack signal: -56 dBm
authorized: yes
authenticated: yes
associated: yes
preamble: short
WMM/WME: yes
MFP: no
TDLS peer: no
DTIM period: 2
beacon interval:100
short preamble: yes
short slot time:yes
connected time: 203 seconds
Main use case is to measure the signal strength of a connected station
to AP. Data packet transmit rates and bandwidth used by station can vary
a lot even if the station is at fixed location, especially if the rates
used are multi stream(2stream, 3stream) rates with different bandwidth(20/40/80 Mhz).
These multi stream rates are sensitive and station can use different transmit power
for each of the rate and bandwidth combinations. RSSI measured from these RX packets
on AP will be not stable and can vary a lot with in a short time.
Whereas 802.11 ack frames from station are sent relatively at a constant
rate (6/12/24 Mbps) with constant bandwidth(20 Mhz).
So average rssi of the ack packets is good and more accurate.
Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This will serve userspace entity to maintain its regulatory limitation.
More specifcally APs can use this data to calculate the WMM IE when
building: beacons, probe responses, assoc responses etc...
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for your net-next
tree, more relevant updates in this batch are:
1) Add Maglev support to IPVS. Moreover, store lastest server weight in
IPVS since this is needed by maglev, patches from from Inju Song.
2) Preparation works to add iptables flowtable support, patches
from Felix Fietkau.
3) Hand over flows back to conntrack slow path in case of TCP RST/FIN
packet is seen via new teardown state, also from Felix.
4) Add support for extended netlink error reporting for nf_tables.
5) Support for larger timeouts that 23 days in nf_tables, patch from
Florian Westphal.
6) Always set an upper limit to dynamic sets, also from Florian.
7) Allow number generator to make map lookups, from Laura Garcia.
8) Use hash_32() instead of opencode hashing in IPVS, from Vicent Bernat.
9) Extend ip6tables SRH match to support previous, next and last SID,
from Ahmed Abdelsalam.
10) Move Passive OS fingerprint nf_osf.c, from Fernando Fernandez.
11) Expose nf_conntrack_max through ctnetlink, from Florent Fourcot.
12) Several housekeeping patches for xt_NFLOG, x_tables and ebtables,
from Taehee Yoo.
13) Unify meta bridge with core nft_meta, then make nft_meta built-in.
Make rt and exthdr built-in too, again from Florian.
14) Missing initialization of tbl->entries in IPVS, from Cong Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
IPCTNL_MSG_CT_GET_STATS netlink command allow to monitor current number
of conntrack entries. However, if one wants to compare it with the
maximum (and detect exhaustion), the only solution is currently to read
sysctl value.
This patch add nf_conntrack_max value in netlink message, and simplify
monitoring for application built on netlink API.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add nf_osf_ttl() and nf_osf_match() into nf_osf.c to prepare for
nf_tables support.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
These macros allow conveniently declaring arrays which use NFT_{RT,CT}_*
values as indexes.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
IPv6 Segment Routing Header (SRH) contains a list of SIDs to be crossed
by SR encapsulated packet. Each SID is encoded as an IPv6 prefix.
When a Firewall receives an SR encapsulated packet, it should be able
to identify which node previously processed the packet (previous SID),
which node is going to process the packet next (next SID), and which
node is the last to process the packet (last SID) which represent the
final destination of the packet in case of inline SR mode.
An example use-case of using these features could be SID list that
includes two firewalls. When the second firewall receives a packet,
it can check whether the packet has been processed by the first firewall
or not. Based on that check, it decides to apply all rules, apply just
subset of the rules, or totally skip all rules and forward the packet to
the next SID.
This patch extends SRH match to support matching previous SID, next SID,
and last SID.
Signed-off-by: Ahmed Abdelsalam <amsalam20@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch includes a new attribute in the numgen structure to allow
the lookup of an element based on the number generator as a key.
For this purpose, different ops have been included to extend the
current numgen inc functions.
Currently, only supported for numgen incremental operations, but
it will be supported for random in a follow-up patch.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
- Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off)
- SPDX license tag cleanups (new tag Linux-OpenIB)
- RoCE GID fixes related to default GIDs
- Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch),
mlx4, mlx5, and hfi1 (medium batch)
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJa7JXPAAoJELgmozMOVy/dc0AP/0i7EajAmgl1ihka6BYVj2pa
DV8iSrVMDPulh9AVnAtwLJSbdwmgN/HeVzLzcutHyMYk6tAf8RCs6TsyoB36XiOL
oUh5+V2GyNnyh9veWPwyGTgZKCpPJc3uQFV6502lZVDYwArMfGatumApBgQVKiJ+
YdPEXEQZPNIs6YZB1WXkNYV/ra9u0aBByQvUrxwVZ2AND+srJYO82tqZit2wBtjK
UXrhmZbWXGWMFg8K3/lpfUkQhkG3Arj+tMKkCfqsVzC7wUPhlTKBHR9NmvdLIiy9
5Vhv7Xp78udcxZKtUeTFsbhaMqqK7x7sKHnpKAs7hOZNZ/Eg47BrMwMrZVLOFuDF
nBLUL1H+nJ1mASZoMWH5xzOpVew+e9X0cot09pVDBIvsOIh97wCG7hgptQ2Z5xig
fcDiMmg6tuakMsaiD0dzC9JI5HR6Z7+6oR1tBkQFDxQ+XkkcoFabdmkJaIRRwOj7
CUhXRgcm0UgVd03Jdta6CtYXsjSODirWg4AvSSMt9lUFpjYf9WZP00/YojcBbBEH
UlVrPbsKGyncgrm3FUP6kXmScESfdTljTPDLiY9cO9+bhhPGo1OHf005EfAp178B
jGp6hbKlt+rNs9cdXrPSPhjds+QF8HyfSlwyYVWKw8VWlh/5DG8uyGYjF05hYO0q
xhjIS6/EZjcTAh5e4LzR
=PI8v
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"This is our first pull request of the rc cycle. It's not that it's
been overly quiet, we were just waiting on a few things before sending
this off.
For instance, the 6 patch series from Intel for the hfi1 driver had
actually been pulled in on Tuesday for a Wednesday pull request, only
to have Jason notice something I missed, so we held off for some
testing, and then on Thursday had to respin the series because the
very first patch needed a minor fix (unnecessary cast is all).
There is a sizable hns patch series in here, as well as a reasonably
largish hfi1 patch series, then all of the lines of uapi updates are
just the change to the new official Linux-OpenIB SPDX tag (a bunch of
our files had what amounts to a BSD-2-Clause + MIT Warranty statement
as their license as a result of the initial code submission years ago,
and the SPDX folks decided it was unique enough to warrant a unique
tag), then the typical mlx4 and mlx5 updates, and finally some cxgb4
and core/cache/cma updates to round out the bunch.
None of it was overly large by itself, but in the 2 1/2 weeks we've
been collecting patches, it has added up :-/.
As best I can tell, it's been through 0day (I got a notice about my
last for-next push, but not for my for-rc push, but Jason seems to
think that failure messages are prioritized and success messages not
so much). It's also been through linux-next. And yes, we did notice in
the context portion of the CMA query gid fix patch that there is a
dubious BUG_ON() in the code, and have plans to audit our BUG_ON usage
and remove it anywhere we can.
Summary:
- Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off)
- SPDX license tag cleanups (new tag Linux-OpenIB)
- RoCE GID fixes related to default GIDs
- Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch),
mlx4, mlx5, and hfi1 (medium batch)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (52 commits)
RDMA/cma: Do not query GID during QP state transition to RTR
IB/mlx4: Fix integer overflow when calculating optimal MTT size
IB/hfi1: Fix memory leak in exception path in get_irq_affinity()
IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure
IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used
IB/hfi1: Fix loss of BECN with AHG
IB/hfi1 Use correct type for num_user_context
IB/hfi1: Fix handling of FECN marked multicast packet
IB/core: Make ib_mad_client_id atomic
iw_cxgb4: Atomically flush per QP HW CQEs
IB/uverbs: Fix kernel crash during MR deregistration flow
IB/uverbs: Prevent reregistration of DM_MR to regular MR
RDMA/mlx4: Add missed RSS hash inner header flag
RDMA/hns: Fix a couple misspellings
RDMA/hns: Submit bad wr
RDMA/hns: Update assignment method for owner field of send wqe
RDMA/hns: Adjust the order of cleanup hem table
RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set
RDMA/hns: Remove some unnecessary attr_mask judgement
RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set
...
If a seccomp user is not interested in Speculative Store Bypass mitigation
by default, it can set the new SECCOMP_FILTER_FLAG_SPEC_ALLOW flag when
adding filters.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
For certain use cases it is desired to enforce mitigations so they cannot
be undone afterwards. That's important for loader stubs which want to
prevent a child from disabling the mitigation again. Will also be used for
seccomp(). The extra state preserving of the prctl state for SSB is a
preparatory step for EBPF dymanic speculation control.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This adds a small BPF helper similar to bpf_skb_load_bytes() that
is able to load relative to mac/net header offset from the skb's
linear data. Compared to bpf_skb_load_bytes(), it takes a fifth
argument namely start_header, which is either BPF_HDR_START_MAC
or BPF_HDR_START_NET. This allows for a more flexible alternative
compared to LD_ABS/LD_IND with negative offset. It's enabled for
tc BPF programs as well as sock filter program types where it's
mainly useful in reuseport programs to ease access to lower header
data.
Reference: https://lists.iovisor.org/pipermail/iovisor-dev/2017-March/000698.html
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This driver will be used to support Mesa on the Broadcom 7268 and 7278
platforms.
V3D 3.3 introduces an MMU, which means we no longer need CMA or vc4's
complicated CL/shader validation scheme. This massively changes the
GEM behavior, so I've forked off to a new driver.
v2: Mark SUBMIT_CL as needing DRM_AUTH. coccinelle fixes from kbuild
test robot. Drop personal git link from MAINTAINERS. Don't
double-map dma-buf imported BOs. Add kerneldoc about needing MMU
eviction. Drop prime vmap/unmap stubs. Delay mmap offset setup
to mmap time. Use drm_dev_init instead of _alloc. Use
ktime_get() for wait_bo timeouts. Drop drm_can_sleep() usage,
since we don't modeset. Switch page tables back to WC (debug
change to coherent had slipped in). Switch
drm_gem_object_unreference_unlocked() to
drm_gem_object_put_unlocked(). Simplify overflow mem handling by
not sharing overflow mem between jobs.
v3: no changes
v4: align submit_cl to 64 bits (review by airlied), check zero flags in
other ioctls.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v4)
Acked-by: Dave Airlie <airlied@linux.ie> (v3, requested submit_cl change)
Link: https://patchwork.freedesktop.org/patch/msgid/20180430181058.30181-3-eric@anholt.net
In this commit, a new getsockopt is added: XDP_STATISTICS. This is
used to obtain stats from the sockets.
v2: getsockopt now returns size of stats structure.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Another setsockopt (XDP_TX_QUEUE) is added to let the process allocate
a queue, where the user process can pass frames to be transmitted by
the kernel.
The mmapping of the queue is done using the XDP_PGOFF_TX_QUEUE offset.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Here, we add another setsockopt for registered user memory (umem)
called XDP_UMEM_COMPLETION_QUEUE. Using this socket option, the
process can ask the kernel to allocate a queue (ring buffer) and also
mmap it (XDP_UMEM_PGOFF_COMPLETION_QUEUE) into the process.
The queue is used to explicitly pass ownership of umem frames from the
kernel to user process. This will be used by the TX path to tell user
space that a certain frame has been transmitted and user space can use
it for something else, if it wishes.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The xskmap is yet another BPF map, very much inspired by
dev/cpu/sockmap, and is a holder of AF_XDP sockets. A user application
adds AF_XDP sockets into the map, and by using the bpf_redirect_map
helper, an XDP program can redirect XDP frames to an AF_XDP socket.
Note that a socket that is bound to certain ifindex/queue index will
*only* accept XDP frames from that netdev/queue index. If an XDP
program tries to redirect from a netdev/queue index other than what
the socket is bound to, the frame will not be received on the socket.
A socket can reside in multiple maps.
v3: Fixed race and simplified code.
v2: Removed one indirection in map lookup.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Here, the bind syscall is added. Binding an AF_XDP socket, means
associating the socket to an umem, a netdev and a queue index. This
can be done in two ways.
The first way, creating a "socket from scratch". Create the umem using
the XDP_UMEM_REG setsockopt and an associated fill queue with
XDP_UMEM_FILL_QUEUE. Create the Rx queue using the XDP_RX_QUEUE
setsockopt. Call bind passing ifindex and queue index ("channel" in
ethtool speak).
The second way to bind a socket, is simply skipping the
umem/netdev/queue index, and passing another already setup AF_XDP
socket. The new socket will then have the same umem/netdev/queue index
as the parent so it will share the same umem. You must also set the
flags field in the socket address to XDP_SHARED_UMEM.
v2: Use PTR_ERR instead of passing error variable explicitly.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Another setsockopt (XDP_RX_QUEUE) is added to let the process allocate
a queue, where the kernel can pass completed Rx frames from the kernel
to user process.
The mmapping of the queue is done using the XDP_PGOFF_RX_QUEUE offset.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Here, we add another setsockopt for registered user memory (umem)
called XDP_UMEM_FILL_QUEUE. Using this socket option, the process can
ask the kernel to allocate a queue (ring buffer) and also mmap it
(XDP_UMEM_PGOFF_FILL_QUEUE) into the process.
The queue is used to explicitly pass ownership of umem frames from the
user process to the kernel. These frames will in a later patch be
filled in with Rx packet data by the kernel.
v2: Fixed potential crash in xsk_mmap.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In this commit the base structure of the AF_XDP address family is set
up. Further, we introduce the abilty register a window of user memory
to the kernel via the XDP_UMEM_REG setsockopt syscall. The memory
window is viewed by an AF_XDP socket as a set of equally large
frames. After a user memory registration all frames are "owned" by the
user application, and not the kernel.
v2: More robust checks on umem creation and unaccount on error.
Call set_page_dirty_lock on cleanup.
Simplified xdp_umem_reg.
Co-authored-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
I had originally asked Stefan Schake to drop the pad field from the
syncobj changes that just landed, because I couldn't come up with a
reason to align to 64 bits.
Talking with Dave Airlie about the new v3d driver's submit ioctl, we
came up with a reason: sizeof() on 64-bit platforms may align to 64
bits, in which case the userspace will be submitting the aligned size
and the final 32 bits won't be zero-padded by the kernel. If
userspace doesn't zero-fill, then a future ABI change adding a 32-bit
field at the end could potentially cause the kernel to read undefined
data from old userspace (our userspace happens to use structure
initialization that zero-fills, but as a general rule we try not to
rely on that in the kernel).
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430235927.28712-1-eric@anholt.net
Reviewed-by: Stefan Schake <stschake@gmail.com>
Each driver can register a "fill entry" function with the restrack core.
This function will be called when filling out a resource, allowing the
driver to add driver-specific details. The details consist of a
nltable of nested attributes, that are in the form of <key, [print-type],
value> tuples. Both key and value attributes are mandatory. The key
nlattr must be a string, and the value nlattr can be one of the driver
attributes that are generic, but typed, allowing the attributes to be
validated. Currently the driver nlattr types include string, s32,
u32, s64, and u64. The print-type nlattr allows a driver to specify
an alternative display format for user tools displaying the attribute.
For example, a u32 attribute will default to "%u", but a print-type
attribute can be included for it to be displayed in hex. This allows
the user tool to print the number in the format desired by the driver
driver.
More attrs can be defined as they become needed by drivers.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a specific RDMA_NLDEV_ATTR_PAD attribute to be used for 64b
attribute padding. To preserve the ABI, make this attribute equal to
RDMA_NLDEV_ATTR_UNSPEC, which has a value of 0, because that has been
used up until now as the pad attribute.
Change all the previous use of 0 as the pad with this
new enum.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add two new prctls to control aspects of speculation related vulnerabilites
and their mitigations to provide finer grained control over performance
impacting mitigations.
PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature
which is selected with arg2 of prctl(2). The return value uses bit 0-2 with
the following meaning:
Bit Define Description
0 PR_SPEC_PRCTL Mitigation can be controlled per task by
PR_SET_SPECULATION_CTRL
1 PR_SPEC_ENABLE The speculation feature is enabled, mitigation is
disabled
2 PR_SPEC_DISABLE The speculation feature is disabled, mitigation is
enabled
If all bits are 0 the CPU is not affected by the speculation misfeature.
If PR_SPEC_PRCTL is set, then the per task control of the mitigation is
available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
misfeature will fail.
PR_SET_SPECULATION_CTRL allows to control the speculation misfeature, which
is selected by arg2 of prctl(2) per task. arg3 is used to hand in the
control value, i.e. either PR_SPEC_ENABLE or PR_SPEC_DISABLE.
The common return values are:
EINVAL prctl is not implemented by the architecture or the unused prctl()
arguments are not 0
ENODEV arg2 is selecting a not supported speculation misfeature
PR_SET_SPECULATION_CTRL has these additional return values:
ERANGE arg3 is incorrect, i.e. it's not either PR_SPEC_ENABLE or PR_SPEC_DISABLE
ENXIO prctl control of the selected speculation misfeature is disabled
The first supported controlable speculation misfeature is
PR_SPEC_STORE_BYPASS. Add the define so this can be shared between
architectures.
Based on an initial patch from Tim Chen and mostly rewritten.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This is the io_getevents equivalent of ppoll/pselect and allows to
properly mix signals and aio completions (especially with IOCB_CMD_POLL)
and atomically executes the following sequence:
sigset_t origmask;
pthread_sigmask(SIG_SETMASK, &sigmask, &origmask);
ret = io_getevents(ctx, min_nr, nr, events, timeout);
pthread_sigmask(SIG_SETMASK, &origmask, NULL);
Note that unlike many other signal related calls we do not pass a sigmask
size, as that would get us to 7 arguments, which aren't easily supported
by the syscall infrastructure. It seems a lot less painful to just add a
new syscall variant in the unlikely case we're going to increase the
sigset size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Applications with many concurrent connections, high variance
in receive queue length and tight memory bounds cannot
allocate worst-case buffer size to drain sockets. Knowing
the size of receive queue length, applications can optimize
how they allocate buffers to read from the socket.
The number of bytes pending on the socket is directly
available through ioctl(FIONREAD/SIOCINQ) and can be
approximated using getsockopt(MEMINFO) (rmem_alloc includes
skb overheads in addition to application data). But, both of
these options add an extra syscall per recvmsg. Moreover,
ioctl(FIONREAD/SIOCINQ) takes the socket lock.
Add the TCP_INQ socket option to TCP. When this socket
option is set, recvmsg() relays the number of bytes available
on the socket for reading to the application via the
TCP_CM_INQ control message.
Calculate the number of bytes after releasing the socket lock
to include the processed backlog, if any. To avoid an extra
branch in the hot path of recvmsg() for this new control
message, move all cmsg processing inside an existing branch for
processing receive timestamps. Since the socket lock is not held
when calculating the size of receive queue, TCP_INQ is a hint.
For example, it can overestimate the queue size by one byte,
if FIN is received.
With this method, applications can start reading from the socket
using a small buffer, and then use larger buffers based on the
remaining data when needed.
V3 change-log:
As suggested by David Miller, added loads with barrier
to check whether we have multiple threads calling recvmsg
in parallel. When that happens we lock the socket to
calculate inq.
V4 change-log:
Removed inline from a static function.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The intention is to get notified of process failures as soon
as possible, before a possible core dumping (which could be very long)
(e.g. in some process-manager). Coredump and exit process events
are perfect for such use cases (see 2b5faa4c55 "connector: Added
coredumping event to the process connector").
The problem is that for now the process-manager cannot know the parent
of a dying process using connectors. This could be useful if the
process-manager should monitor for failures only children of certain
parents, so we could filter the coredump and exit events by parent
process and/or thread ID.
Add parent pid and tgid to coredump and exit process connectors event
data.
Signed-off-by: Stefan Strogin <sstrogin@cisco.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow specifying a syncobj on render job submission where we store the
fence for the job. This gives userland flexible access to the fence.
v2: Use 0 as invalid syncobj to drop flag (Eric)
Don't reintroduce the padding (Eric)
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-3-git-send-email-stschake@gmail.com
Allow userland to specify a syncobj that is waited on before a render job
starts processing.
v2: Use 0 as invalid syncobj to drop flag (Eric)
Drop extra newline (Eric)
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-2-git-send-email-stschake@gmail.com
This resolves the merge issue with drivers/usb/core/hcd.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix formatting (indent) for bpf_get_stack() helper documentation, so
that the doc is rendered correctly with the Python script.
Fixes: c195651e56 ("bpf: add bpf_get_stack helper")
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Some edits brought to the last iteration of BPF helper functions
documentation introduced an error with RST formatting. As a result, most
of one paragraph is rendered in bold text when only the name of a helper
should be. Fix it, and fix formatting of another function name in the
same paragraph.
Fixes: c6b5fb8690 ("bpf: add documentation for eBPF helpers (42-50)")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When adding tcp mmap() implementation, I forgot that socket lock
had to be taken before current->mm->mmap_sem. syzbot eventually caught
the bug.
Since we can not lock the socket in tcp mmap() handler we have to
split the operation in two phases.
1) mmap() on a tcp socket simply reserves VMA space, and nothing else.
This operation does not involve any TCP locking.
2) getsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...) implements
the transfert of pages from skbs to one VMA.
This operation only uses down_read(¤t->mm->mmap_sem) after
holding TCP lock, thus solving the lockdep issue.
This new implementation was suggested by Andy Lutomirski with great details.
Benefits are :
- Better scalability, in case multiple threads reuse VMAS
(without mmap()/munmap() calls) since mmap_sem wont be write locked.
- Better error recovery.
The previous mmap() model had to provide the expected size of the
mapping. If for some reason one part could not be mapped (partial MSS),
the whole operation had to be aborted.
With the tcp_zerocopy_receive struct, kernel can report how
many bytes were successfuly mapped, and how many bytes should
be read to skip the problematic sequence.
- No more memory allocation to hold an array of page pointers.
16 MB mappings needed 32 KB for this array, potentially using vmalloc() :/
- skbs are freed while mmap_sem has been released
Following patch makes the change in tcp_mmap tool to demonstrate
one possible use of mmap() and setsockopt(... TCP_ZEROCOPY_RECEIVE ...)
Note that memcg might require additional changes.
Fixes: 93ab6cc691 ("tcp: implement mmap() for zero copy receive")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Cc: linux-mm@kvack.org
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull timer fixes from Thomas Gleixner:
"Two fixes from the timer departement:
- Fix a long standing issue in the NOHZ tick code which causes RB
tree corruption, delayed timers and other malfunctions. The cause
for this is code which modifies the expiry time of an enqueued
hrtimer.
- Revert the CLOCK_MONOTONIC/CLOCK_BOOTTIME unification due to
regression reports. Seems userspace _is_ relying on the documented
behaviour despite our hope that it wont"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME
tick/sched: Do not mess with an enqueued hrtimer
Helpers may operate on two types of ctx structures: user visible ones
(e.g. `struct bpf_sock_ops`) when used in user programs, and kernel ones
(e.g. `struct bpf_sock_ops_kern`) in kernel implementation.
UAPI documentation must refer to only user visible structures.
The patch replaces references to `_kern` structures in BPF helpers
description by corresponding user visible structures.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, stackmap and bpf_get_stackid helper are provided
for bpf program to get the stack trace. This approach has
a limitation though. If two stack traces have the same hash,
only one will get stored in the stackmap table,
so some stack traces are missing from user perspective.
This patch implements a new helper, bpf_get_stack, will
send stack traces directly to bpf program. The bpf program
is able to see all stack traces, and then can do in-kernel
processing or send stack traces to user space through
shared map or bpf_perf_event_output.
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ARM:
- PSCI selection API, a leftover from 4.16 (for stable)
- Kick vcpu on active interrupt affinity change
- Plug a VMID allocation race on oversubscribed systems
- Silence debug messages
- Update Christoffer's email address (linaro -> arm)
x86:
- Expose userspace-relevant bits of a newly added feature
- Fix TLB flushing on VMX with VPID, but without EPT
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJa44lQAAoJEED/6hsPKofo1dIH/3n9AZSWvavgL2V3j6agT8Yy
hxF4nHCFEJd5aqDNwbG9QEzivKw88r3o3mdB2XAQESB2MlCYR1jkTONm7yvVJTs/
/P9gj+DEQbCj2AgT//u3BGsAsZDKFhB9JwfmV2Mp4zDIqWFa6oCOGeq/iPVAGDcN
vUpuYeIicuH9SRoxH7de3z+BEXW0O+gCABXQtvA93FKTMz35yFTgmbDVCnvaV0zL
3B+3/4/jdbTRICW8EX6Li43+gEBUMtnVNkdqxLPTuCtDG8iuPUGfgF02gH99/9gj
hliV3Q4VUZKkSABW5AqKPe4+9rbsHCh9eL0LpHFGI9y+6LeUIOXAX4CtohR8gWE=
=W9Vz
-----END PGP SIGNATURE-----
rMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- PSCI selection API, a leftover from 4.16 (for stable)
- Kick vcpu on active interrupt affinity change
- Plug a VMID allocation race on oversubscribed systems
- Silence debug messages
- Update Christoffer's email address (linaro -> arm)
x86:
- Expose userspace-relevant bits of a newly added feature
- Fix TLB flushing on VMX with VPID, but without EPT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/headers/UAPI: Move DISABLE_EXITS KVM capability bits to the UAPI
kvm: apic: Flush TLB after APIC mode/address change if VPIDs are in use
arm/arm64: KVM: Add PSCI version selection API
KVM: arm/arm64: vgic: Kick new VCPU on interrupt migration
arm64: KVM: Demote SVE and LORegion warnings to debug only
MAINTAINERS: Update e-mail address for Christoffer Dall
KVM: arm/arm64: Close VMID generation race
The Link Control 2 register is missing macros for Target Link Speeds. Add
those in.
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
[bhelgaas: use "GT" instead of "GB"]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move DISABLE_EXITS KVM capability bits to the UAPI just like the rest of
capabilities.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Here are 2 staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that you
pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuMyew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymXxACffYtMbj0Vg5pD0yAPqRzJ2iVMVE0AnRkp4BYQ
kXgAjDeSyrdKPUwQ7Hl2
=UNuF
-----END PGP SIGNATURE-----
Merge tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that
you pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wilc1000: fix NULL pointer exception in host_int_parse_assoc_resp_info()
staging: irda: remove remaining remants of irda code removal
After the introduction of a 128-bit node identity it may be difficult
for a user to correlate between this identity and the generated node
hash address.
We now try to make this easier by introducing a new ioctl() call for
fetching a node identity by using the hash value as key. This will
be particularly useful when we extend some of the commands in the
'tipc' tool, but we also expect regular user applications to need
this feature.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-04-27
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add extensive BPF helper description into include/uapi/linux/bpf.h
and a new script bpf_helpers_doc.py which allows for generating a
man page out of it. Thus, every helper in BPF now comes with proper
function signature, detailed description and return code explanation,
from Quentin.
2) Migrate the BPF collect metadata tunnel tests from BPF samples over
to the BPF selftests and further extend them with v6 vxlan, geneve
and ipip tests, simplify the ipip tests, improve documentation and
convert to bpf_ntoh*() / bpf_hton*() api, from William.
3) Currently, helpers that expect ARG_PTR_TO_MAP_{KEY,VALUE} can only
access stack and packet memory. Extend this to allow such helpers
to also use map values, which enabled use cases where value from
a first lookup can be directly used as a key for a second lookup,
from Paul.
4) Add a new helper bpf_skb_get_xfrm_state() for tc BPF programs in
order to retrieve XFRM state information containing SPI, peer
address and reqid values, from Eyal.
5) Various optimizations in nfp driver's BPF JIT in order to turn ADD
and SUB instructions with negative immediate into the opposite
operation with a positive immediate such that nfp can better fit
small immediates into instructions. Savings in instruction count
up to 4% have been observed, from Jakub.
6) Add the BPF prog's gpl_compatible flag to struct bpf_prog_info
and add support for dumping this through bpftool, from Jiri.
7) Move the BPF sockmap samples over into BPF selftests instead since
sockmap was rather a series of tests than sample anyway and this way
this can be run from automated bots, from John.
8) Follow-up fix for bpf_adjust_tail() helper in order to make it work
with generic XDP, from Nikita.
9) Some follow-up cleanups to BTF, namely, removing unused defines from
BTF uapi header and renaming 'name' struct btf_* members into name_off
to make it more clear they are offsets into string section, from Martin.
10) Remove test_sock_addr from TEST_GEN_PROGS in BPF selftests since
not run directly but invoked from test_sock_addr.sh, from Yonghong.
11) Remove redundant ret assignment in sample BPF loader, from Wang.
12) Add couple of missing files to BPF selftest's gitignore, from Anders.
There are two trivial merge conflicts while pulling:
1) Remove samples/sockmap/Makefile since all sockmap tests have been
moved to selftests.
2) Add both hunks from tools/testing/selftests/bpf/.gitignore to the
file since git should ignore all of them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
I don't know why signalfd has never grown support for SIGSYS but grow it now.
This corrects an oversight and removes a need for a default in the
switch statement. Allowing gcc to warn when future members are added
to the enum siginfo_layout, and signalfd does not handle them.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Dominique Martinet reported a TCP hang problem when simultaneous open was used.
The problem is that the tcp_conntracks state table is not smart enough
to handle the case. The state table could be fixed by introducing a new state,
but that would require more lines of code compared to this patch, due to the
required backward compatibility with ctnetlink.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Reported-by: Dominique Martinet <asmadeus@codewreck.org>
Tested-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions:
Helper from Nikita:
- bpf_xdp_adjust_tail()
Helper from Eyal:
- bpf_skb_get_xfrm_state()
v4:
- New patch (helpers did not exist yet for previous versions).
Cc: Nikita V. Shirokov <tehnerd@tehnerd.com>
Cc: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions, all
written by John:
- bpf_redirect_map()
- bpf_sk_redirect_map()
- bpf_sock_map_update()
- bpf_msg_redirect_map()
- bpf_msg_apply_bytes()
- bpf_msg_cork_bytes()
- bpf_msg_pull_data()
v4:
- bpf_redirect_map(): Fix typos: "XDP_ABORT" changed to "XDP_ABORTED",
"his" to "this". Also add a paragraph on performance improvement over
bpf_redirect() helper.
v3:
- bpf_sk_redirect_map(): Improve description of BPF_F_INGRESS flag.
- bpf_msg_redirect_map(): Improve description of BPF_F_INGRESS flag.
- bpf_redirect_map(): Fix note on CPU redirection, not fully implemented
for generic XDP but supported on native XDP.
- bpf_msg_pull_data(): Clarify comment about invalidated verifier
checks.
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions:
Helpers from Lawrence:
- bpf_setsockopt()
- bpf_getsockopt()
- bpf_sock_ops_cb_flags_set()
Helpers from Yonghong:
- bpf_perf_event_read_value()
- bpf_perf_prog_read_value()
Helper from Josef:
- bpf_override_return()
Helper from Andrey:
- bpf_bind()
v4:
- bpf_perf_event_read_value(): State that this helper should be
preferred over bpf_perf_event_read().
v3:
- bpf_perf_event_read_value(): Fix time of selection for perf event type
in description. Remove occurences of "cores" to avoid confusion with
"CPU".
- bpf_bind(): Remove last paragraph of description, which was off topic.
Cc: Lawrence Brakmo <brakmo@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
[for bpf_perf_event_read_value(), bpf_perf_prog_read_value()]
Acked-by: Andrey Ignatov <rdna@fb.com>
[for bpf_bind()]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions:
Helper from Kaixu:
- bpf_perf_event_read()
Helpers from Martin:
- bpf_skb_under_cgroup()
- bpf_xdp_adjust_head()
Helpers from Sargun:
- bpf_probe_write_user()
- bpf_current_task_under_cgroup()
Helper from Thomas:
- bpf_skb_change_head()
Helper from Gianluca:
- bpf_probe_read_str()
Helpers from Chenbo:
- bpf_get_socket_cookie()
- bpf_get_socket_uid()
v4:
- bpf_perf_event_read(): State that bpf_perf_event_read_value() should
be preferred over this helper.
- bpf_skb_change_head(): Clarify comment about invalidated verifier
checks.
- bpf_xdp_adjust_head(): Clarify comment about invalidated verifier
checks.
- bpf_probe_write_user(): Add that dst must be a valid user space
address.
- bpf_get_socket_cookie(): Improve description by making clearer that
the cockie belongs to the socket, and state that it remains stable for
the life of the socket.
v3:
- bpf_perf_event_read(): Fix time of selection for perf event type in
description. Remove occurences of "cores" to avoid confusion with
"CPU".
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Gianluca Borello <g.borello@gmail.com>
Cc: Chenbo Feng <fengc@google.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
[for bpf_skb_under_cgroup(), bpf_xdp_adjust_head()]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions, all
written by Daniel:
- bpf_get_hash_recalc()
- bpf_skb_change_tail()
- bpf_skb_pull_data()
- bpf_csum_update()
- bpf_set_hash_invalid()
- bpf_get_numa_node_id()
- bpf_set_hash()
- bpf_skb_adjust_room()
- bpf_xdp_adjust_meta()
v4:
- bpf_skb_change_tail(): Clarify comment about invalidated verifier
checks.
- bpf_skb_pull_data(): Clarify the motivation for using this helper or
bpf_skb_load_bytes(), on non-linear buffers. Fix RST formatting for
*skb*. Clarify comment about invalidated verifier checks.
- bpf_csum_update(): Fix description of checksum (entire packet, not IP
checksum). Fix a typo: "header" instead of "helper".
- bpf_set_hash_invalid(): Mention bpf_get_hash_recalc().
- bpf_get_numa_node_id(): State that the helper is not restricted to
programs attached to sockets.
- bpf_skb_adjust_room(): Clarify comment about invalidated verifier
checks.
- bpf_xdp_adjust_meta(): Clarify comment about invalidated verifier
checks.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions, all
written by Daniel:
- bpf_get_prandom_u32()
- bpf_get_smp_processor_id()
- bpf_get_cgroup_classid()
- bpf_get_route_realm()
- bpf_skb_load_bytes()
- bpf_csum_diff()
- bpf_skb_get_tunnel_opt()
- bpf_skb_set_tunnel_opt()
- bpf_skb_change_proto()
- bpf_skb_change_type()
v4:
- bpf_get_prandom_u32(): Warn that the prng is not cryptographically
secure.
- bpf_get_smp_processor_id(): Fix a typo (case).
- bpf_get_cgroup_classid(): Clarify description. Add notes on the helper
being limited to cgroup v1, and to egress path.
- bpf_get_route_realm(): Add comparison with bpf_get_cgroup_classid().
Add a note about usage with TC and advantage of clsact. Fix a typo in
return value ("sdb" instead of "skb").
- bpf_skb_load_bytes(): Make explicit loading large data loads it to the
eBPF stack.
- bpf_csum_diff(): Add a note on seed that can be cascaded. Link to
bpf_l3|l4_csum_replace().
- bpf_skb_get_tunnel_opt(): Add a note about usage with "collect
metadata" mode, and example of this with Geneve.
- bpf_skb_set_tunnel_opt(): Add a link to bpf_skb_get_tunnel_opt()
description.
- bpf_skb_change_proto(): Mention that the main use case is NAT64.
Clarify comment about invalidated verifier checks.
v3:
- bpf_get_prandom_u32(): Fix helper name :(. Add description, including
a note on the internal random state.
- bpf_get_smp_processor_id(): Add description, including a note on the
processor id remaining stable during program run.
- bpf_get_cgroup_classid(): State that CONFIG_CGROUP_NET_CLASSID is
required to use the helper. Add a reference to related documentation.
State that placing a task in net_cls controller disables cgroup-bpf.
- bpf_get_route_realm(): State that CONFIG_CGROUP_NET_CLASSID is
required to use this helper.
- bpf_skb_load_bytes(): Fix comment on current use cases for the helper.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions, all
written by Alexei:
- bpf_get_current_pid_tgid()
- bpf_get_current_uid_gid()
- bpf_get_current_comm()
- bpf_skb_vlan_push()
- bpf_skb_vlan_pop()
- bpf_skb_get_tunnel_key()
- bpf_skb_set_tunnel_key()
- bpf_redirect()
- bpf_perf_event_output()
- bpf_get_stackid()
- bpf_get_current_task()
v4:
- bpf_redirect(): Fix typo: "XDP_ABORT" changed to "XDP_ABORTED". Add
note on bpf_redirect_map() providing better performance. Replace "Save
for" with "Except for".
- bpf_skb_vlan_push(): Clarify comment about invalidated verifier
checks.
- bpf_skb_vlan_pop(): Clarify comment about invalidated verifier
checks.
- bpf_skb_get_tunnel_key(): Add notes on tunnel_id, "collect metadata"
mode, and example tunneling protocols with which it can be used.
- bpf_skb_set_tunnel_key(): Add a reference to the description of
bpf_skb_get_tunnel_key().
- bpf_perf_event_output(): Specify that, and for what purpose, the
helper can be used with programs attached to TC and XDP.
v3:
- bpf_skb_get_tunnel_key(): Change and improve description and example.
- bpf_redirect(): Improve description of BPF_F_INGRESS flag.
- bpf_perf_event_output(): Fix first sentence of description. Delete
wrong statement on context being evaluated as a struct pt_reg. Remove
the long yet incomplete example.
- bpf_get_stackid(): Add a note about PERF_MAX_STACK_DEPTH being
configurable.
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions, all
written by Alexei:
- bpf_map_lookup_elem()
- bpf_map_update_elem()
- bpf_map_delete_elem()
- bpf_probe_read()
- bpf_ktime_get_ns()
- bpf_trace_printk()
- bpf_skb_store_bytes()
- bpf_l3_csum_replace()
- bpf_l4_csum_replace()
- bpf_tail_call()
- bpf_clone_redirect()
v4:
- bpf_map_lookup_elem(): Add "const" qualifier for key.
- bpf_map_update_elem(): Add "const" qualifier for key and value.
- bpf_map_lookup_elem(): Add "const" qualifier for key.
- bpf_skb_store_bytes(): Clarify comment about invalidated verifier
checks.
- bpf_l3_csum_replace(): Mention L3 instead of just IP, and add a note
about bpf_csum_diff().
- bpf_l4_csum_replace(): Mention L4 instead of just TCP/UDP, and add a
note about bpf_csum_diff().
- bpf_tail_call(): Bring minor edits to description.
- bpf_clone_redirect(): Add a note about the relation with
bpf_redirect(). Also clarify comment about invalidated verifier
checks.
v3:
- bpf_map_lookup_elem(): Fix description of restrictions for flags
related to the existence of the entry.
- bpf_trace_printk(): State that trace_pipe can be configured. Fix
return value in case an unknown format specifier is met. Add a note on
kernel log notice when the helper is used. Edit example.
- bpf_tail_call(): Improve comment on stack inheritance.
- bpf_clone_redirect(): Improve description of BPF_F_INGRESS flag.
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Remove previous "overview" of eBPF helpers from user bpf.h header.
Replace it by a comment explaining how to process the new documentation
(to come in following patches) with a Python script to produce RST, then
man page documentation.
Also add the aforementioned Python script under scripts/. It is used to
process include/uapi/linux/bpf.h and to extract helper descriptions, to
turn it into a RST document that can further be processed with rst2man
to produce a man page. The script takes one "--filename <path/to/file>"
option. If the script is launched from scripts/ in the kernel root
directory, it should be able to find the location of the header to
parse, and "--filename <path/to/file>" is then optional. If it cannot
find the file, then the option becomes mandatory. RST-formatted
documentation is printed to standard output.
Typical workflow for producing the final man page would be:
$ ./scripts/bpf_helpers_doc.py \
--filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst
$ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7
$ man /tmp/bpf-helpers.7
Note that the tool kernel-doc cannot be used to document eBPF helpers,
whose signatures are not available directly in the header files
(pre-processor directives are used to produce them at the beginning of
the compilation process).
v4:
- Also remove overviews for newly added bpf_xdp_adjust_tail() and
bpf_skb_get_xfrm_state().
- Remove vague statement about what helpers are restricted to GPL
programs in "LICENSE" section for man page footer.
- Replace license boilerplate with SPDX tag for Python script.
v3:
- Change license for man page.
- Remove "for safety reasons" from man page header text.
- Change "packets metadata" to "packets" in man page header text.
- Move and fix comment on helpers introducing no overhead.
- Remove "NOTES" section from man page footer.
- Add "LICENSE" section to man page footer.
- Edit description of file include/uapi/linux/bpf.h in man page footer.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adding gpl_compatible flag to struct bpf_prog_info
so it can be dumped via bpf_prog_get_info_by_fd and
displayed via bpftool progs dump.
Alexei noticed 4-byte hole in struct bpf_prog_info,
so we put the u32 flags field in there, and we can
keep adding bit fields in there without breaking
user space.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Support generic segmentation offload for udp datagrams. Callers can
concatenate and send at once the payload of multiple datagrams with
the same destination.
To set segment size, the caller sets socket option UDP_SEGMENT to the
length of each discrete payload. This value must be smaller than or
equal to the relevant MTU.
A follow-up patch adds cmsg UDP_SEGMENT to specify segment size on a
per send call basis.
Total byte length may then exceed MTU. If not an exact multiple of
segment size, the last segment will be shorter.
The implementation adds a gso_size field to the udp socket, ip(v6)
cmsg cookie and inet_cork structure to be able to set the value at
setsockopt or cmsg time and to work with both lockless and corked
paths.
Initial benchmark numbers show UDP GSO about as expensive as TCP GSO.
tcp tso
3197 MB/s 54232 msg/s 54232 calls/s
6,457,754,262 cycles
tcp gso
1765 MB/s 29939 msg/s 29939 calls/s
11,203,021,806 cycles
tcp without tso/gso *
739 MB/s 12548 msg/s 12548 calls/s
11,205,483,630 cycles
udp
876 MB/s 14873 msg/s 624666 calls/s
11,205,777,429 cycles
udp gso
2139 MB/s 36282 msg/s 36282 calls/s
11,204,374,561 cycles
[*] after reverting commit 0a6b2a1dc2
("tcp: switch to GSO being always on")
Measured total system cycles ('-a') for one core while pinning both
the network receive path and benchmark process to that core:
perf stat -a -C 12 -e cycles \
./udpgso_bench_tx -C 12 -4 -D "$DST" -l 4
Note the reduction in calls/s with GSO. Bytes per syscall drops
increases from 1470 to 61818.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert commits
92af4dcb4e ("tracing: Unify the "boot" and "mono" tracing clocks")
127bfa5f43 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior")
7250a4047a ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior")
d6c7270e91 ("timekeeping: Remove boot time specific code")
f2d6fdbfd2 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior")
d6ed449afd ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock")
72199320d4 ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock")
As stated in the pull request for the unification of CLOCK_MONOTONIC and
CLOCK_BOOTTIME, it was clear that we might have to revert the change.
As reported by several folks systemd and other applications rely on the
documented behaviour of CLOCK_MONOTONIC on Linux and break with the above
changes. After resume daemons time out and other timeout related issues are
observed. Rafael compiled this list:
* systemd kills daemons on resume, after >WatchdogSec seconds
of suspending (Genki Sky). [Verified that that's because systemd uses
CLOCK_MONOTONIC and expects it to not include the suspend time.]
* systemd-journald misbehaves after resume:
systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal
corrupted or uncleanly shut down, renaming and replacing.
(Mike Galbraith).
* NetworkManager reports "networking disabled" and networking is broken
after resume 50% of the time (Pavel). [May be because of systemd.]
* MATE desktop dims the display and starts the screensaver right after
system resume (Pavel).
* Full system hang during resume (me). [May be due to systemd or NM or both.]
That happens on debian and open suse systems.
It's sad, that these problems were neither catched in -next nor by those
folks who expressed interest in this change.
Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reported-by: Genki Sky <sky@genki.is>,
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Both powerpc and alpha have cases where they wronly set si_code to 0
in combination with SIGTRAP and don't mean SI_USER.
About half the time this is because the architecture can not report
accurately what kind of trap exception triggered the trap exception.
The other half the time it looks like no one has bothered to
figure out an appropriate si_code.
For the cases where the architecture does not have enough information
or is too lazy to figure out exactly what kind of trap exception
it is define TRAP_UNK.
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-alpha@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This commit introduces a helper which allows fetching xfrm state
parameters by eBPF programs attached to TC.
Prototype:
bpf_skb_get_xfrm_state(skb, index, xfrm_state, size, flags)
skb: pointer to skb
index: the index in the skb xfrm_state secpath array
xfrm_state: pointer to 'struct bpf_xfrm_state'
size: size of 'struct bpf_xfrm_state'
flags: reserved for future extensions
The helper returns 0 on success. Non zero if no xfrm state at the index
is found - or non exists at all.
struct bpf_xfrm_state currently includes the SPI, peer IPv4/IPv6
address and the reqid; it can be further extended by adding elements to
its end - indicating the populated fields by the 'size' argument -
keeping backwards compatibility.
Typical usage:
struct bpf_xfrm_state x = {};
bpf_skb_get_xfrm_state(skb, 0, &x, sizeof(x), 0);
...
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jason Wang points out that it's very hard for users to build an array of
stat names. The naive thing is to use VIRTIO_BALLOON_S_NR but that
breaks if we add more stats - as done e.g. recently by commit 6c64fe7f2
("virtio_balloon: export hugetlb page allocation counts").
Let's add an array of reasonably readable names.
Fixes: 6c64fe7f2 ("virtio_balloon: export hugetlb page allocation counts")
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jonathan Helman <jonathan.helman@oracle.com>
ebt_get_target similar to {ip/ip6/arp}t_get_target.
and ebt_get_target_c similar to {ip/ip6/arp}t_get_target_c.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is a patch proposal to support shifted ranges in portmaps. (i.e. tcp/udp
incoming port 5000-5100 on WAN redirected to LAN 192.168.1.5:2000-2100)
Currently DNAT only works for single port or identical port ranges. (i.e.
ports 5000-5100 on WAN interface redirected to a LAN host while original
destination port is not altered) When different port ranges are configured,
either 'random' mode should be used, or else all incoming connections are
mapped onto the first port in the redirect range. (in described example
WAN:5000-5100 will all be mapped to 192.168.1.5:2000)
This patch introduces a new mode indicated by flag NF_NAT_RANGE_PROTO_OFFSET
which uses a base port value to calculate an offset with the destination port
present in the incoming stream. That offset is then applied as index within the
redirect port range (index modulo rangewidth to handle range overflow).
In described example the base port would be 5000. An incoming stream with
destination port 5004 would result in an offset value 4 which means that the
NAT'ed stream will be using destination port 2004.
Other possibilities include deterministic mapping of larger or multiple ranges
to a smaller range : WAN:5000-5999 -> LAN:5000-5099 (maps WAN port 5*xx to port
51xx)
This patch does not change any current behavior. It just adds new NAT proto
range functionality which must be selected via the specific flag when intended
to use.
A patch for iptables (libipt_DNAT.c + libip6t_DNAT.c) will also be proposed
which makes this functionality immediately available.
Signed-off-by: Thierry Du Tre <thierry@dtsystems.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Vitaly Kuznetsov
Christoph Hellwig
Linus Torvalds
Yi-Hung Wei
David S. Miller
Nikolay Aleksandrov
Eric Biggers
Yonghong Song
Huy Nguyen
Giulio Benetti
Mathieu Xhonneux
Sandipan Das
Roopa Prabhu
Alexei Starovoitov
Martin KaFai Lau
Vidyullatha Kanchanapally
Arend Van Spriel
Johannes Berg
Björn Töpel
Dave Airlie
Greg Kroah-Hartman
Jiri Pirko
Thomas Gleixner
Thierry Reding
John Fastabend
Matthew Garrett
Eric Dumazet
Laura Garcia Liebana
Florian Westphal
Ariel Levkovich
Eric Sandeen
Doug Ledford
Yong Zhao
Huang Rui
Marek Olšák
Chunming Zhou
Christian König
Jorge Sanjuan
Marcelo Ricardo Leitner
Richard Guy Briggs
Rahul Lakkireddy
Takashi Sakamoto
Paul Durrant
Ranjani Sridharan
Maarten Lankhorst
Shashank Sharma
Ankit Nautiyal
David Ahern
Mauro Carvalho Chehab
Marek Szyprowski
Arnd Bergmann
Toke Høiland-Jørgensen
Balaji Pothunoori
Haim Dreyfuss
Florent Fourcot
Fernando Fernandez Mancera
Phil Sutter
Ahmed Abdelsalam
Kees Cook
Daniel Borkmann
Eric Anholt
Magnus Karlsson
Steve Wise
Soheil Hassas Yeganeh
Stefan Strogin
Stefan Schake
Quentin Monnet
Andrey Ignatov
Frederick Lawler
KarimAllah Ahmed
Jon Maloy
Eric W. Biederman
Jozsef Kadlecsik
Jiri Olsa
Willem de Bruijn
Eyal Birger
Michael S. Tsirkin
Taehee Yoo
Thierry Du Tre