Pull networking updates from David Miller:
"Highlights:
1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.
2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.
3) Make flow classifier more lockless, from Vlad Buslov.
4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.
5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.
6) Partial GSO offload support in XFRM, from Boris Pismenny.
7) Add fast link down support to ethtool, from Heiner Kallweit.
8) Use siphash for IP ID generator, from Eric Dumazet.
9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.
10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.
11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.
12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.
13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.
14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.
15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.
16) Remove SKB list implementation assumptions in SCTP, your's truly.
17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.
18) Add memory accounting on TX and RX path of SCTP, from Xin Long.
19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.
20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.
21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.
22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.
23) Allow DSA tag drivers to be modular, from Andrew Lunn.
24) Remove legacy DSA probing support, also from Andrew Lunn.
25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.
26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.
27) More indirect call optimizations, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...
- Consolidate memory initialization Kconfigs (Kees)
- Implement support for Clang's stack variable auto-init (Alexander)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=i0Gi
-----END PGP SIGNATURE-----
Merge tag 'meminit-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull compiler-based variable initialization updates from Kees Cook:
"This is effectively part of my gcc-plugins tree, but as this adds some
Clang support, it felt weird to still call it "gcc-plugins". :)
This consolidates Kconfig for the existing stack variable
initialization (via structleak and stackleak gcc plugins) and adds
Alexander Potapenko's support for Clang's new similar functionality.
Summary:
- Consolidate memory initialization Kconfigs (Kees)
- Implement support for Clang's stack variable auto-init (Alexander)"
* tag 'meminit-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
security: Implement Clang's stack initialization
security: Move stackleak config to Kconfig.hardening
security: Create "kernel hardening" config area
Pull livepatching updates from Jiri Kosina:
- livepatching kselftests improvements from Joe Lawrence and Miroslav
Benes
- making use of gcc's -flive-patching option when available, from
Miroslav Benes
- kobject handling cleanups, from Petr Mladek
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Remove duplicated code for early initialization
livepatch: Remove custom kobject state handling
livepatch: Convert error about unsupported reliable stacktrace into a warning
selftests/livepatch: Add functions.sh to TEST_PROGS_EXTENDED
kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled
selftests/livepatch: use TEST_PROGS for test scripts
Problem:
When a kernel module is compiled as a separate module, some important
information about the kernel module is available via .modinfo section of
the module. In contrast, when the kernel module is compiled into the
kernel, that information is not available.
Information about built-in modules is necessary in the following cases:
1. When it is necessary to find out what additional parameters can be
passed to the kernel at boot time.
2. When you need to know which module names and their aliases are in
the kernel. This is very useful for creating an initrd image.
Proposal:
The proposed patch does not remove .modinfo section with module
information from the vmlinux at the build time and saves it into a
separate file after kernel linking. So, the kernel does not increase in
size and no additional information remains in it. Information is stored
in the same format as in the separate modules (null-terminated string
array). Because the .modinfo section is already exported with a separate
modules, we are not creating a new API.
It can be easily read in the userspace:
$ tr '\0' '\n' < modules.builtin.modinfo
ext4.softdep=pre: crc32c
ext4.license=GPL
ext4.description=Fourth Extended Filesystem
ext4.author=Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others
ext4.alias=fs-ext4
ext4.alias=ext3
ext4.alias=fs-ext3
ext4.alias=ext2
ext4.alias=fs-ext2
md_mod.alias=block-major-9-*
md_mod.alias=md
md_mod.description=MD RAID framework
md_mod.license=GPL
md_mod.parmtype=create_on_open:bool
md_mod.parmtype=start_dirty_degraded:int
...
Co-Developed-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Handle samples/ like the other top-level directories to simplify
the Makefile.
Include include/config/auto.conf earlier to evaluate
drivers-$(CONFIG_SAMPLES).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We already did this for clang, but now gcc has that warning too. Yes,
yes, the address may be unaligned. And that's kind of the point.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_INIT_STACK_ALL turns on stack initialization based on
-ftrivial-auto-var-init in Clang builds, which has greater coverage
than CONFIG_GCC_PLUGINS_STRUCTLEAK_BYREF_ALL.
-ftrivial-auto-var-init Clang option provides trivial initializers for
uninitialized local variables, variable fields and padding.
It has three possible values:
pattern - uninitialized locals are filled with a fixed pattern
(mostly 0xAA on 64-bit platforms, see https://reviews.llvm.org/D54604
for more details, but 0x000000AA for 32-bit pointers) likely to cause
crashes when uninitialized value is used;
zero (it's still debated whether this flag makes it to the official
Clang release) - uninitialized locals are filled with zeroes;
uninitialized (default) - uninitialized locals are left intact.
This patch uses only the "pattern" mode when CONFIG_INIT_STACK_ALL is
enabled.
Developers have the possibility to opt-out of this feature on a
per-variable basis by using __attribute__((uninitialized)), but such
use should be well justified in comments.
Co-developed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-04-12
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Improve BPF verifier scalability for large programs through two
optimizations: i) remove verifier states that are not useful in pruning,
ii) stop walking parentage chain once first LIVE_READ is seen. Combined
gives approx 20x speedup. Increase limits for accepting large programs
under root, and add various stress tests, from Alexei.
2) Implement global data support in BPF. This enables static global variables
for .data, .rodata and .bss sections to be properly handled which allows
for more natural program development. This also opens up the possibility
to optimize program workflow by compiling ELFs only once and later only
rewriting section data before reload, from Daniel and with test cases and
libbpf refactoring from Joe.
3) Add config option to generate BTF type info for vmlinux as part of the
kernel build process. DWARF debug info is converted via pahole to BTF.
Latter relies on libbpf and makes use of BTF deduplication algorithm which
results in 100x savings compared to DWARF data. Resulting .BTF section is
typically about 2MB in size, from Andrii.
4) Add BPF verifier support for stack access with variable offset from
helpers and add various test cases along with it, from Andrey.
5) Extend bpf_skb_adjust_room() growth BPF helper to mark inner MAC header
so that L2 encapsulation can be used for tc tunnels, from Alan.
6) Add support for input __sk_buff context in BPF_PROG_TEST_RUN so that
users can define a subset of allowed __sk_buff fields that get fed into
the test program, from Stanislav.
7) Add bpf fs multi-dimensional array tests for BTF test suite and fix up
various UBSAN warnings in bpftool, from Yonghong.
8) Generate a pkg-config file for libbpf, from Luca.
9) Dump program's BTF id in bpftool, from Prashant.
10) libbpf fix to use smaller BPF log buffer size for AF_XDP's XDP
program, from Magnus.
11) kallsyms related fixes for the case when symbols are not present in
BPF selftests and samples, from Daniel
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After cross-compiling the kernel, "make mrproper" should be executed
with the proper ARCH= option. Otherwise, stale objects will remain
under arch/$(SRCARCH)/.
One bad scenario is like this:
$ make ARCH=arm defconfig all # cross-compile the kernel for arm
$ make mrproper # mrproper for host-arch (i.e. x86)
$ make ARCH=arm O=build_dir defconfig all
If you miss ARCH= for mrproper and cross-compile the kernel with O=
and ARCH= options, Kbuild will happily start to build, but may fail
due to stale objects in the srctree.
If $(srctree)/arch/$(SRCARCH)/include/generated/ exists, let's stop
the out-of-tree build. To detect this, mrproper should clean only
arch/$(SRCARCH)/include/generated/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This is unneeded since commit 43fee2b238 ("kbuild: do not redirect
the first prerequisite for filechk").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
GCC 9 introduces a new option, -flive-patching. It disables certain
optimizations which could make a compilation unsafe for later live
patching of the running kernel.
The option is used only if CONFIG_LIVEPATCH is enabled and $(CC)
supports it.
Performance impact of the option was measured on three different
Intel machines - two bigger NUMA boxes and one smaller UMA box. Kernel
intensive (IO, scheduling, networking) benchmarks were selected, plus a
set of HPC workloads from NAS Parallel Benchmark. The tests were done on
upstream kernel 5.0-rc8 with openSUSE Leap 15.0 userspace.
The majority of the tests is unaffected. The only significant exception
is the scheduler section which suffers 1-3% degradation.
Evaluated-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
This patch adds new config option to trigger generation of BTF type
information from DWARF debuginfo for vmlinux and kernel modules through
pahole, which in turn relies on libbpf for btf_dedup() algorithm.
The intent is to record compact type information of all types used
inside kernel, including all the structs/unions/typedefs/etc. This
enables BPF's compile-once-run-everywhere ([0]) approach, in which
tracing programs that are inspecting kernel's internal data (e.g.,
struct task_struct) can be compiled on a system running some kernel
version, but would be possible to run on other kernel versions (and
configurations) without recompilation, even if the layout of structs
changed and/or some of the fields were added, removed, or renamed.
This is only possible if BPF loader can get kernel type info to adjust
all the offsets correctly. This patch is a first time in this direction,
making sure that BTF type info is part of Linux kernel image in
non-loadable ELF section.
BTF deduplication ([1]) algorithm typically provides 100x savings
compared to DWARF data, so resulting .BTF section is not big as is
typically about 2MB in size.
[0] http://vger.kernel.org/lpc-bpf2018.html#session-2
[1] https://facebookmicrosites.github.io/bpf/blog/2018/11/14/btf-enhancement.html
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
KBUILD_SRC was conventionally used for some different purposes:
[1] To remember the source tree path
[2] As a flag to check if sub-make is already done
[3] As a flag to check if Kbuild runs out of tree
For [1], we do not need to remember it because the top Makefile
can compute it by $(realpath $(dir $(lastword $(MAKEFILE_LIST))))
[2] has been replaced with self-commenting 'sub_make_done'.
For [3], we can distinguish in-tree/out-of-tree by comparing
$(srctree) and '.'
This commit converts [3] to prepare for the KBUILD_SRC removal.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kbuild always runs in the top of the output directory.
If Make starts in the source directory with O=, it relocates the
working directory to the location specified by O=.
Also, users can start build from the output directory by using the
Makefile generated by scripts/mkmakefile.
With a little more effort, Kbuild will be able to start from any
directory path.
This commit allows to specify the source directory by using
the -f option.
For example, you can do:
$ cd path/to/output/dir
$ make -f path/to/source/dir/Makefile
Or, for the equivalent behavior, you can do:
$ make O=path/to/output/dir -f path/to/source/dir/Makefile
KBUILD_SRC is now deprecated.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kbingham@kernel.org>
Manipulating $(MAKECMDGOALS) for sub-make seems odd to me.
[1] 'make O=foo sub-make' is turned into 'make O=foo', which builds
the default targets. It would make sense to terminate the build with:
*** No rule to make target 'sub-make'. Stop.
[2] 'make O=foo defconfig _all' is turned into 'make O=foo defconfig',
which changes the behavior.
Let's pass $(MAKECMDGOALS) as is.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If you do "make Makefile" with GNU Make 3.x, the following warning
is displayed:
$ make Makefile
Makefile:165: warning: overriding recipe for target 'Makefile'
Makefile:51: warning: ignoring old recipe for target 'Makefile'
make[1]: Nothing to be done for 'Makefile'.
make: Nothing to be done for 'Makefile'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When you run a "make *config" target, the retpoline compiler flags
are evaluated for nothing because the code is located above the
'ifeq ($(config-targets),1)'.
Move it a bit below to avoid unneeded computation in the Kconfig stage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull core fixes from Thomas Gleixner:
"A small set of core updates:
- Make the watchdog respect the selected CPU mask again. That was
broken by the rework of the watchdog thread management and caused
inconsistent state and NMI watchdog being unstoppable.
- Ensure that the objtool build can find the libelf location.
- Remove dead kcore stub code"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
watchdog: Respect watchdog cpumask on CPU hotplug
objtool: Query pkg-config for libelf location
proc/kcore: Remove unused kclist_add_remap()
- Remove harmful -Oz option of Clang
- Get back the original behavior (no recursion for in-tree build)
for GNU Make 4.x
- Some minor fixes for coccinelle patches
- Do not overwrite .gitignore in the output directory in case
it is version-controlled
- Fix missed record-mcount bug for dynamic ftrace
- Fix endianness bug in modversions for relative CRC
- Cater to '^H' key code in Kconfig ncurses programs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6tE2
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove harmful -Oz option of Clang
- Get back the original behavior (no recursion for in-tree build) for
GNU Make 4.x
- Some minor fixes for coccinelle patches
- Do not overwrite .gitignore in the output directory in case it is
version-controlled
- Fix missed record-mcount bug for dynamic ftrace
- Fix endianness bug in modversions for relative CRC
- Cater to '^H' key code in Kconfig ncurses programs
* tag 'kbuild-fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig/[mn]conf: handle backspace (^H) key
kbuild: modversions: Fix relative CRC byte order interpretation
scripts: coccinelle: Fix description of badty.cocci
kbuild: strip whitespace in cmd_record_mcount findstring
kbuild: do not overwrite .gitignore in output directory
kbuild: skip parsing pre sub-make code for recursion
coccinelle: put_device: reduce false positives
kbuild: skip sub-make for in-tree build with GNU Make 4.x
Revert "kbuild: use -Oz instead of -Os when using clang"
Commit 3a51ff3442 ("kbuild: gitignore output directory") seemed to
bother people who version-control output directories.
Andre Przywara says:
"Unfortunately this breaks my setup, because I keep a totally separate
git repository in my build directories to track (various versions of)
.config. So .gitignore there is carefully crafted to ignore most build
artefacts, but not .config, for instance."
Link: https://lkml.org/lkml/2019/3/22/1819
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
When Make recurses to the top Makefile with sub-make-done unset,
the code block surrounded by 'ifneq ($(sub-make-done),1) ... endif'
is parsed multiple times. This happens for in-tree building of
include/config/auto.conf, *-pkg, etc. with GNU Make 4.x.
This is a slight regression by commit 688931a5ad ("kbuild: skip
sub-make for in-tree build with GNU Make 4.x") in terms of performance
since that code block contains one $(shell ...) invocation.
Fix it by exporting the variable irrespective of sub-make being run.
I renamed it because GNU Make cannot properly export variables
containing hyphens. This is probably a bug of GNU Make, and the issue
in Kbuild had already been reported by commit 2bfbe7881e ("kbuild:
Do not use hyphen in exported variable name").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 2b50f7ab63 ("kbuild: add workaround for Debian make-kpkg")
annoyed people who want to wrap the top Makefile with GNUmakefile
to customize it for their use.
On second thought, we do not need to run the sub-make for in-tree
build with Make 4.x because the 'MAKEFLAGS += -rR' issue only happens
on GNU Make 3.x.
With this commit, people will get back their workflow, and the Debian
make-kpkg will still work.
Fixes: 2b50f7ab63 ("kbuild: add workaround for Debian make-kpkg")
Reported-by: Andreas Schwab <schwab@suse.de>
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Andreas Schwab <schwab@suse.de>
Tested-by: David Howells <dhowells@redhat.com>
The clang option -Oz enables *aggressive* optimization for size,
which doesn't necessarily result in smaller images, but can have
negative impact on performance. Switch back to the less aggressive
-Os.
This reverts commit 6748cb3c29.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes
the common Kbuild.asm file. Factor out the duplicated include directives
to scripts/Makefile.asm-generic so that no architecture would opt out
of the mandatory-y mechanism.
um is not forced to include mandatory-y since it is a very exceptional
case which does not support UAPI.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
During a simple no-op (nothing changed) build I saw 39 invocations of
the C compiler with the argument "-print-file-name=include". We don't
need to call the C compiler 39 times for this--one time will suffice.
Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid
this since there doesn't appear to be any reason it should be
recursively expanded.
On my build this shaved ~400 ms off my "no-op" build.
Note that the recursive expansion seems to date back to the (really
old) commit e8f5bdb02c ("[PATCH] Makefile include path ordering").
It's a little unclear to me if the point of that patch was to switch
the variable to be recursively expanded (which it did) or to avoid
directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because
someone else (out of tree?) was setting it. I presume later since if
the only goal was to switch to recursive expansion the patch would
have just removed the ":".
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 3812b8c5c5 ("kbuild: make -r/-R effective in top
Makefile for old Make versions"), make-kpkg is not working.
make-kpkg directly includes the top Makefile of Linux kernel, and
appends some debian_* targets.
/usr/share/kernel-package/ruleset/kernel_version.mk:
# Include the kernel makefile
override dot-config := 1
include Makefile
dot-config := 1
I did not know the kernel Makefile was used in that way, and it is
hard to guarantee the behavior when the kernel Makefile is included
by another Makefile from a different project.
It looks like Debian Stretch stopped providing make-kpkg. Maybe it is
obsolete and being replaced with 'make deb-pkg' etc. but still widely
used.
This commit adds a workaround; if the top Makefile is included by
another Makefile, skip sub-make in order to make the main part visible.
'MAKEFLAGS += -rR' does not become effective for GNU Make < 4.0, but
Debian/Ubuntu is already using newer versions.
The effect of this commit:
Debian 8 (Jessie) : Fixed
Debian 9 (Stretch) : make-kpkg (kernel-package) is not provided
Ubuntu 14.04 LTS : NOT Fixed
Ubuntu 16.04 LTS : Fixed
Ubuntu 18.04 LTS : Fixed
This commit cannot fix Ubuntu 14.04 because it installs GNU Make 3.81,
but its support will end in Apr 2019, which is before the Linux v5.1
release.
I added warning so that nobody would try to include the top Makefile.
Fixes: 3812b8c5c5 ("kbuild: make -r/-R effective in top Makefile for old Make versions")
Reported-by: Liz Zhang <lizzha@microsoft.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Lili Deng <v-lide@microsoft.com>
Cc: Manoj Srivastava <srivasta@debian.org>
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module build
- allow to add optional flags to dpkg-buildpackage when building deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y9YG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module
build
- allow to add optional flags to dpkg-buildpackage when building
deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: remove scripts/basic/% build target
kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
kbuild: clean up scripts/gcc-version.sh
kbuild: remove cc-version macro
kbuild: update comment block of scripts/clang-version.sh
kbuild: remove commented-out INITRD_COMPRESS
kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
kbuild: move ".config not found!" message from Kconfig to Makefile
kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
kbuild: simplify single target rules
kbuild: remove empty rules for makefiles
kbuild: make -r/-R effective in top Makefile for old Make versions
kbuild: move tools_silent to a more relevant place
kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
kbuild: refactor cc-cross-prefix implementation
kbuild: hardcode genksyms path and remove GENKSYMS variable
scripts/gdb: refactor rules for symlink creation
kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
scripts/gdb: do not descend into scripts/gdb from scripts
...
Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+euQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynyTgCfbV8CLums843sBnT8NnWrTMTdTCcAn1K4re0m
ep8g+6oRLxJy414hogxQ
=bLs2
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
driver core: platform: remove misleading err_alloc label
platform: set of_node in platform_device_register_full()
firmware: hardcode the debug message for -ENOENT
driver core: Add missing description of new struct device_link field
driver core: Fix PM-runtime for links added during consumer probe
drivers/component: kerneldoc polish
async: Add cmdline option to specify drivers to be async probed
driver core: Fix possible supplier PM-usage counter imbalance
PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
driver: platform: Support parsing GpioInt 0 in platform_get_irq()
selftests: firmware: fix verify_reqs() return value
Revert "selftests: firmware: remove use of non-standard diff -Z option"
Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
device: Fix comment for driver_data in struct device
kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
sysfs: remove unused include of kernfs-internal.h
driver core: Postpone DMA tear-down until after devres release
driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
PM-runtime: Take suppliers into account in __pm_runtime_set_status()
device.h: Add __cold to dev_<level> logging functions
...
This build rule was introduced by commit cd05e6bdc6 ("[PATCH]
kbuild: fix split-include dependency") to handle the dependency of
scripts/basic/split-include.
Now, fixdep is the only tool in scripts/basic/, and this rule is
no longer used.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The flag '-Werror-implicit-function-declaration', present in GCC 2.95,
stopped to be documented in GCC 4.3, replaced by the more generic
'-Werror=...' form.
So, use the equivalent '-Werror=implicit-function-declaration' instead.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This code has been commented out since commit b7000adef1
("Don't set the INITRD_COMPRESS environment variable automatically").
Clean it up now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
CONFIG_DEBUG_INFO_SPLIT and CONFIG_DEBUG_INFO_DWARF4 enable extra
dwarf options if supported. You never know if they are really enabled
since Makefile may silently turn them off.
The actual behavior will match to the kernel configuration by
testing those compiler flags in the Kconfig stage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If you run "make" in a pristine source tree, currently Kbuild will
start to build Kconfig to let it show the error message.
It would be more straightforward to check it in Makefile and let
it fail immediately.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If include/config/auto.conf.cmd is lost for some reasons, it is not
self-healing, so the top Makefile misses to run syncconfig.
Move include/config/auto.conf.cmd to the target side.
I used a pattern rule instead of a normal rule here although it is
a bit gross.
If the rule were written with a normal rule like this,
include/config/auto.conf \
include/config/auto.conf.cmd \
include/config/tristate.conf: $(KCONFIG_CONFIG)
$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
... syncconfig would be executed per target.
Using a pattern rule makes sure that syncconfig is executed just once
because Make assumes the recipe will create all of the targets.
Here is a quote from the GNU Make manual [1]:
"Pattern rules may have more than one target. Unlike normal rules,
this does not act as many different rules with the same prerequisites
and recipe. If a pattern rule has multiple targets, make knows that
the rule's recipe is responsible for making all of the targets. The
recipe is executed only once to make all the targets. When searching
for a pattern rule to match a target, the target patterns of a rule
other than the one that matches the target in need of a rule are
incidental: make worries only about giving a recipe and prerequisites
to the file presently in question. However, when this file's recipe is
run, the other targets are marked as having been updated themselves."
[1]: https://www.gnu.org/software/make/manual/html_node/Pattern-Intro.html
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The dependency will be checked anyway after Kbuild descends into a
sub-directory. Skip object/source dependency checks in top Makefile.
VPATH can be simpler since the top Makefile no longer checks the
presence of the source file, which is located in in the external
module directory.
One good thing is, it can compile an object from a generated source
file.
$ make crypto/rsapubkey.asn1.o
...
ASN.1 crypto/rsapubkey.asn1.c
CC crypto/rsapubkey.asn1.o
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The previous commit made 'MAKEFLAGS += -rR' effective in the top
Makefile regardless of O= option, GNU Make versions.
The top Makefile does not need to cancel implicit rules for makefiles.
There is still one place where an empty rule is useful. Since -rR is
effective only after sub-make, GNU Make would try implicit rules to
update the top Makefile. Although it is not a big overhead, cancel it
just in case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Adding -rR to MAKEFLAGS is important because we do not want to
be bothered by built-in implicit rules or variables.
One problem that used to exist in older GNU Make versions is
MAKEFLAGS += -rR
... does not become effective in the current Makefile. When you are
building with O= option, it becomes effective in the top Makefile
since it recurses via 'sub-make' target. Otherwise, the top Makefile
tries implicit rules. That is why we explicitly add empty rules for
Makefiles, but we often miss to do that.
In fact, adding -d option to older GNU Make versions shows it is
trying a bunch of implicit pattern rules.
Considering target file `scripts/Makefile.kcov'.
Looking for an implicit rule for `scripts/Makefile.kcov'.
Trying pattern rule with stem `Makefile.kcov'.
Trying implicit prerequisite `scripts/Makefile.kcov.o'.
Trying pattern rule with stem `Makefile.kcov'.
Trying implicit prerequisite `scripts/Makefile.kcov.c'.
Trying pattern rule with stem `Makefile.kcov'.
Trying implicit prerequisite `scripts/Makefile.kcov.cc'.
Trying pattern rule with stem `Makefile.kcov'.
Trying implicit prerequisite `scripts/Makefile.kcov.C'.
...
This issue was fixed by GNU Make commit 58dae243526b ("[Savannah #20501]
Handle adding -r/-R to MAKEFLAGS in the makefile"). So, it is no longer
a problem if you use GNU Make 4.0 or later. However, older versions are
still widely used.
So, I decided to patch the kernel Makefile to invoke sub-make regardless
of O= option. This will allow further cleanups.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since -Wmaybe-uninitialized was introduced by GCC 4.7, we have patched
various false positives:
- commit e74fc973b6 ("Turn off -Wmaybe-uninitialized when building
with -Os") turned off this option for -Os.
- commit 815eb71e71 ("Kbuild: disable 'maybe-uninitialized' warning
for CONFIG_PROFILE_ALL_BRANCHES") turned off this option for
CONFIG_PROFILE_ALL_BRANCHES
- commit a76bcf557e ("Kbuild: enable -Wmaybe-uninitialized warning
for "make W=1"") turned off this option for GCC < 4.9
Arnd provided more explanation in https://lkml.org/lkml/2017/3/14/903
I think this looks better by shifting the logic from Makefile to Kconfig.
Link: https://github.com/ClangBuiltLinux/linux/issues/350
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
The genksyms source was integrated into the kernel tree in 2003.
I do not expect anybody still using the external /sbin/genksyms.
Kbuild does not need to provide the ability to override GENKSYMS.
Let's remove the GENKSYMS variable, and use the hardcoded path.
Since it occurred in the pre-git era, I attached the commit message
in case somebody is interested in the historical background.
| Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
| Date: Wed Feb 19 04:17:28 2003 -0600
|
| kbuild: [PATCH] put genksyms in scripts dir
|
| This puts genksyms into scripts/genksyms/.
|
| genksyms used to be maintained externally, though the only possible user
| was the kernel build. Moving it into the kernel sources makes it easier to
| keep it uptodate, like for example updating it to generate linker scripts
| directly instead of postprocessing the generated header file fragments
| with sed, as we do currently.
|
| Also, genksyms does not handle __typeof__, which needs to be fixed since
| some of the exported symbol in the kernel are defined using __typeof__.
|
| (Rusty Russell/me)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is weird to create gdb stuff as a side-effect of vmlinux.
Move it to a more relevant place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Currently, Kbuild descends from scripts/Makefile to scripts/gdb/Makefile
just for creating symbolic links, but it does not need to do it so early.
Merge the two descending paths to simplify the code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
scripts/gdb/linux/constants.py is never used in the kernel build
process. There is no good reason to create it so early.
Get it out of the 'prepare' stage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Commit 06300b21f4 ("kbuild: support building individual files for
external modules") introduced the '/' target. It works only for
external modules to build all .o files, but skip the modpost stage.
However, 'make /' looks a bit weird to me. 'make ./' is more sensible
if you want to build all objects under the current directory, and it
works as expected.
Let's change '/' into a phony target that is an alias of './', but
I may feel like deprecating it in the future.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is fine to set KBUILD_MODULES=1 when CONFIG_MODULES is disabled.
It is actually how "make allnoconfig all" works.
On the other hand, KBUILD_MODULES=1 is unneeded for the %.ko pattern.
It is just a matter of whether modules.order is generated or not.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This causes an issue when trying to build with `make LD=ld.lld` if
ld.lld and the rest of your cross tools aren't in the same directory
(ex. /usr/local/bin) (as is the case for Android's build system), as the
GCC_TOOLCHAIN_DIR then gets set based on `which $(LD)` which will point
where LLVM tools are, not GCC/binutils tools are located.
Instead, select the GCC_TOOLCHAIN_DIR based on another tool provided by
binutils for which LLVM does not provide a substitute for, such as
elfedit.
Fixes: 785f11aa59 ("kbuild: Add better clang cross build support")
Link: https://github.com/ClangBuiltLinux/linux/issues/341
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When compiling into output directory using O=, many files
created under KBUILD_OUTPUT that git considers
as new ones; git clients, ex. "git gui" lists it, and it clutters
file list making it difficult to see what was really changed
Generate .gitignore in output directory that ignores all
its content
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is no build order among the following:
prepare3
outputmakefile
asm-generic
$(version_h)
$(autoksyms_h)
include/generated/utsrelease.h
It is meaningless to insert the prepare2 target between the first
three and the last three.
The comment says, "prepare2 creates a makefile if using a separate
output directory." Let me explain it more precisely. The prepare
targets cannot be executed without the .config file. Because the
configuration targets depend on the outputmakefile target, the
generated makefile is already there before the parepare2 is run.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The top Makefile does not need to export KBUILD_VMLINUX_INIT and
KBUILD_VMLINUX_MAIN separately.
Put every built-in.a into KBUILD_VMLINUX_OBJS. The order of
$(head-y), $(init-y), $(core-y), ... is still retained.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, the 'firmware' directory only contains a single Makefile
to embed extra firmware into the kernel.
Move it to the more relevant place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c3ff2a5193 ("powerpc/32: add stack protector support")
caused kernel panic on PowerPC when an external module is used with
CONFIG_STACKPROTECTOR because the 'prepare' target was not executed
for the external module build.
Commit e07db28eea ("kbuild: fix single target build for external
module") turned it into a build error because the 'prepare' target is
now executed but the 'prepare0' target is missing for the external
module build.
External module on arm/arm64 with CONFIG_STACKPROTECTOR_PER_TASK is
also broken in the same way.
Move 'PHONY += prepare0' to the common place. GNU Make is fine with
missing rule for phony targets. I also removed the comment which is
wrong irrespective of this commit.
I minimize the change so it can be easily backported to 4.20.x
To fix v4.20, please backport e07db28eea ("kbuild: fix single target
build for external module"), and then this commit.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201891
Fixes: e07db28eea ("kbuild: fix single target build for external module")
Fixes: c3ff2a5193 ("powerpc/32: add stack protector support")
Fixes: 189af46571 ("ARM: smp: add support for per-task stack canaries")
Fixes: 0a1213fa74 ("arm64: enable per-task stack canaries")
Cc: linux-stable <stable@vger.kernel.org> # v4.20
Reported-by: Samuel Holland <samuel@sholland.org>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
You do not have to use define ... endef for filechk_* rules.
For simple cases, the use of assignment looks cleaner, IMHO.
I updated the usage for scripts/Kbuild.include in case somebody
misunderstands the 'define ... endif' is the requirement.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
filechk_* rules often consist of multiple 'echo' lines. They must be
surrounded with { } or ( ) to work correctly. Otherwise, only the
string from the last 'echo' would be written into the target.
Let's take care of that in the 'filechk' in scripts/Kbuild.include
to clean up filechk_* rules.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".
The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:
#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
# define HAVE_JUMP_LABEL
#endif
We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.
Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Pull Devicetree updates from Rob Herring:
"The biggest highlight here is the start of using json-schema for DT
bindings. Being able to validate bindings has been discussed for years
with little progress.
- Initial support for DT bindings using json-schema language. This is
the start of converting DT bindings from free-form text to a
structured format.
- Reworking of initrd address initialization. This moves to using the
phys address instead of virt addr in the DT parsing code. This
rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary
rebuilding of lots of files.
- Fix stale phandle entries in phandle cache
- DT overlay validation improvements. This exposed several memory
leak bugs which have been fixed.
- Use node name and device_type helper functions in DT code
- Last remaining conversions to using %pOFn printk specifier instead
of device_node.name directly
- Create new common RTC binding doc and move all trivial RTC devices
out of trivial-devices.txt.
- New bindings for Freescale MAG3110 magnetometer, Cadence Sierra
PHY, and Xen shared memory
- Update dtc to upstream version v1.4.7-57-gf267e674d145"
* tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits)
of: __of_detach_node() - remove node from phandle cache
of: of_node_get()/of_node_put() nodes held in phandle cache
gpio-omap.txt: add reg and interrupts properties
dt-bindings: mrvl,intc: fix a trivial typo
dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
dt-bindings: Convert trivial-devices.txt to json-schema
dt-bindings: arm: mrvl: amend Browstone compatible string
dt-bindings: arm: Convert Tegra board/soc bindings to json-schema
dt-bindings: arm: Convert ZTE board/soc bindings to json-schema
dt-bindings: arm: Add missing Xilinx boards
dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema
dt-bindings: arm: Convert VIA board/soc bindings to json-schema
dt-bindings: arm: Convert ST STi board/soc bindings to json-schema
dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema
dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema
dt-bindings: arm: Convert QCom board/soc bindings to json-schema
dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema
dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema
dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema
dt-bindings: arm: Convert Altera board/soc bindings to json-schema
...
Pull x86 fixes from Ingo Molnar:
"The biggest part is a series of reverts for the macro based GCC
inlining workarounds. It caused regressions in distro build and other
kernel tooling environments, and the GCC project was very receptive to
fixing the underlying inliner weaknesses - so as time ran out we
decided to do a reasonably straightforward revert of the patches. The
plan is to rely on the 'asm inline' GCC 9 feature, which might be
backported to GCC 8 and could thus become reasonably widely available
on modern distros.
Other than those reverts, there's misc fixes from all around the
place.
I wish our final x86 pull request for v4.20 was smaller..."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs"
Revert "x86/objtool: Use asm macros to work around GCC inlining bugs"
Revert "x86/refcount: Work around GCC inlining bug"
Revert "x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs"
Revert "x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs"
Revert "x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops"
Revert "x86/extable: Macrofy inline assembly code to work around GCC inlining bugs"
Revert "x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs"
Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"
x86/mtrr: Don't copy uninitialized gentry fields back to userspace
x86/fsgsbase/64: Fix the base write helper functions
x86/mm/cpa: Fix cpa_flush_array() TLB invalidation
x86/vdso: Pass --eh-frame-hdr to the linker
x86/mm: Fix decoy address handling vs 32-bit builds
x86/intel_rdt: Ensure a CPU remains online for the region's pseudo-locking sequence
x86/dump_pagetables: Fix LDT remap address marker
x86/mm: Fix guard hole handling
For the same reason as commit 25896d073d ("x86/build: Fix compiler
support check for CONFIG_RETPOLINE"), you cannot put this $(error ...)
into the parse stage of the top Makefile.
Perhaps I'd propose a more sophisticated solution later, but this is
the best I can do for now.
Link: https://lkml.org/lkml/2017/12/25/211
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reported-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reported-by: Qian Cai <cai@lca.pw>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Qian Cai <cai@lca.pw>
This flag is documented in the GCC 4.6 manual, and recognized by
Clang as well. Let's rip off the cc-option switch.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
-Wstrict-prototypes is added to KBUILD_CFLAGS first, then overridden
by -Werror=strict-prototypes later.
Let's add -Werror=strict-prototypes unconditionally because it is
supported by GCC 4.6, and also by Clang.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This flag is documented in the GCC 4.6 manual, and recognized by
Clang as well. Let's rip off the cc-option switch.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
- Use conventional $(MAKE) $(asm-generic)=<dir> style
for directory descending
- Remove unneeded FORCE since "all" is a phony target
- Remove unneeded "_dummy :=" assignment
- Skip $(shell mkdir ...) when headers exist in the directory
- Misc cleanups
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
This adds the build infrastructure for checking DT binding schema
documents and validating dts files using the binding schema.
Check DT binding schema documents:
make dt_binding_check
Build dts files and check using DT binding schema:
make dtbs_check
Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to
use for validation. This makes it easier to find and fix errors
generated by a specific schema.
Currently, the validation targets are separate from a normal build to
avoid a hard dependency on the external DT schema project and because
there are lots of warnings generated.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-doc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
When CONFIG_HEADERS_CHECK is enabled, the headers_check is executed
as a serialized task in the vmlinux recipe.
Make it independent of vmlinux so that parallel building can process
the headers_check and other build targets simultaneously.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, fixdep writes dependencies to .*.tmp, which is renamed to
.*.cmd after everything succeeds. This is a very safe way to avoid
corrupted .*.cmd files. The if_changed_dep has carried this safety
mechanism since it was added in 2002.
If fixdep fails for some reasons or a user terminates the build while
fixdep is running, the incomplete output from the fixdep could be
troublesome.
This is my insight about some bad scenarios:
[1] If the compiler succeeds to generate *.o file, but fixdep fails
to write necessary dependencies to .*.cmd file, Make will miss
to rebuild the object when headers or CONFIG options are changed.
In this case, fixdep should not generate .*.cmd file at all so
that 'arg-check' will surely trigger the rebuild of the object.
[2] A partially constructed .*.cmd file may not be a syntactically
correct makefile. The next time Make runs, it would include it,
then fail to parse it. Once this happens, 'make clean' is be the
only way to fix it.
In fact, [1] is no longer a problem since commit 9c2af1c737 ("kbuild:
add .DELETE_ON_ERROR special target"). Make deletes a target file on
any failure in its recipe. Because fixdep is a part of the recipe of
*.o target, if it fails, the *.o is deleted anyway. However, I am a
bit worried about the slight possibility of [2].
So, here is a solution. Let fixdep directly write to a .*.cmd file,
but allow makefiles to include it only when its corresponding target
exists.
This effectively reverts commit 2982c95357 ("kbuild: remove redundant
$(wildcard ...) for cmd_files calculation"), and commit 00d78ab2ba
("kbuild: remove dead code in cmd_files calculation in top Makefile")
because now we must check the presence of targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now that 'archprepare' depends on 'scripts', Kbuild can descend into
scripts/gcc-plugins in a more standard way.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Before start descending, Kbuild needs to run 'prepare' and 'scripts',
which has been orthogonal to each other.
Going forward, let's consider 'scripts' is a part of the preparation.
This will allow more cleanups.
Move 'scripts' to the prerequisite of 'archprepare', where UML starts
compiling target *.c files.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I am eagar to build under the scripts/ directory only with $(HOSTCC),
but scripts/mod/ highly depends on the $(CC) and target arch headers.
That it why the 'scripts' target must depend on 'asm-generic',
'gcc-plugins', and $(autoksyms_h).
Move it to the 'prepare0' stage. I know this is a cheesy workaround,
but better than the current situation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Building a single target in an external module fails due to missing
.tmp_versions directory.
For example,
$ make -C /lib/modules/$(uname -r)/build M=$PWD foo.o
will fail in the following way:
CC [M] /home/masahiro/foo/foo.o
/bin/sh: 1: cannot create /home/masahiro/foo/.tmp_versions/foo.mod: Directory nonexistent
This is because $(cmd_crmodverdir) is executed only before building
/, %/, %.ko single targets of external modules. Create .tmp_versions
in the 'prepare' target.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
SUBDIRS has been kept as a backward compatibility since
commit ("[PATCH] kbuild: external module support") in 2002.
We do not need multiple ways to do the same thing, so I will remove
SUBDIRS after the Linux 5.3 release. I cleaned up in-tree code, and
updated the document so that nobody would try to use it.
Meanwhile, display the following warning if SUBDIRS is used.
Makefile:189: ================= WARNING ================
Makefile:190: 'SUBDIRS' will be removed after Linux 5.3
Makefile:191: Please use 'M=' or 'KBUILD_EXTMOD' instead
Makefile:192: ==========================================
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> # for scx200_docflash.c
Acked-by: Guenter Roeck <linux@roeck-us.net> # for scx200_wdt.c
The powerpc makefile will use these in it's boot wrapper.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Collect basic Clang options such as --target, --prefix, --gcc-toolchain,
-no-integrated-as into a single variable CLANG_FLAGS so that it can be
easily reused in other parts of Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Greg Hackmann <ghackmann@google.com>
We are still a way off the Clang's integrated assembler support for
the kernel. Hence, -no-integrated-as is mandatory to build the kernel
with Clang. If you had an ancient version of Clang that does not
recognize this option, you would not be able to compile the kernel
anyway.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
There is one more user of $(cc-name) in the top Makefile. It is supposed
to detect Clang before invoking Kconfig, so it should still be there
in the $(shell ...) form. All the other users of $(cc-name) have been
replaced with $(CONFIG_CC_IS_CLANG). Hence, scripts/Kbuild.include does
not need to define cc-name any more.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Evaluating cc-name invokes the compiler every time even when you are
not compiling anything, like 'make help'. This is not efficient.
The compiler type has been already detected in the Kconfig stage.
Use CONFIG_CC_IS_CLANG, instead.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Paul Burton <paul.burton@mips.com> (MIPS)
Acked-by: Joel Stanley <joel@jms.id.au>
- Remove unused fallback for BUILD_BUG_ON (which technically contains a VLA)
- Lift -Wvla to the top-level Makefile
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=Vnw8
-----END PGP SIGNATURE-----
Merge tag 'vla-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull VLA removal from Kees Cook:
"Globally warn on VLA use.
This turns on "-Wvla" globally now that the last few trees with their
VLA removals have landed (crypto, block, net, and powerpc).
Arnd mentioned that there may be a couple more VLAs hiding in
hard-to-find randconfigs, but nothing big has shaken out in the last
month or so in linux-next.
We should be basically VLA-free now! Wheee. :)
Summary:
- Remove unused fallback for BUILD_BUG_ON (which technically contains
a VLA)
- Lift -Wvla to the top-level Makefile"
* tag 'vla-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Makefile: Globally enable VLA warning
compiler.h: give up __compiletime_assert_fallback()
- optimize kallsyms slightly
- remove check for old CFLAGS usage
- add some compiler flags unconditionally instead of evaluating
$(call cc-option,...)
- fix variable shadowing in host tools
- refactor scripts/mkmakefile
- refactor various makefiles
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jM4E
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- optimize kallsyms slightly
- remove check for old CFLAGS usage
- add some compiler flags unconditionally instead of evaluating
$(call cc-option,...)
- fix variable shadowing in host tools
- refactor scripts/mkmakefile
- refactor various makefiles
* tag 'kbuild-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Create macro to avoid variable shadowing
ASN.1: Remove unnecessary shadowed local variable
kbuild: use 'else ifeq' for checksrc to improve readability
kbuild: remove unneeded link_multi_deps
kbuild: add -Wno-unused-but-set-variable flag unconditionally
kbuild: add -Wdeclaration-after-statement flag unconditionally
kbuild: add -Wno-pointer-sign flag unconditionally
modpost: remove leftover symbol prefix handling for module device table
kbuild: simplify command line creation in scripts/mkmakefile
kbuild: do not pass $(objtree) to scripts/mkmakefile
kbuild: remove user ID check in scripts/mkmakefile
kbuild: remove VERSION and PATCHLEVEL from $(objtree)/Makefile
kbuild: add --include-dir flag only for out-of-tree build
kbuild: remove dead code in cmd_files calculation in top Makefile
kbuild: hide most of targets when running config or mixed targets
kbuild: remove old check for CFLAGS use
kbuild: prefix Makefile.dtbinst path with $(srctree) unconditionally
kallsyms: remove left-over Blackfin code
kallsyms: reduce size a little on 64-bit
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral bindings
out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers
-----BEGIN PGP SIGNATURE-----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=335v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
"A bit bigger than normal as I've been busy this cycle.
There's a few things with dependencies and a few things subsystem
maintainers didn't pick up, so I'm taking them thru my tree.
The fixes from Johan didn't get into linux-next, but they've been
waiting for some time now and they are what's left of what subsystem
maintainers didn't pick up.
Summary:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral
bindings out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers"
* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
ARM: dt: relicense two DT binding IRQ headers
power: supply: twl4030-charger: fix OF sibling-node lookup
NFC: nfcmrvl_uart: fix OF child-node lookup
net: stmmac: dwmac-sun8i: fix OF child-node lookup
net: bcmgenet: fix OF child-node lookup
drm/msm: fix OF child-node lookup
drm/mediatek: fix OF sibling-node lookup
of: Add missing exports of node name compare functions
dt-bindings: Add OLPC vendor prefix
dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
dt-bindings: thermal: samsung: Add SPDX license identifier
dt-bindings: clock: samsung: Add SPDX license identifiers
dt-bindings: timer: ostm: Add R7S9210 support
dt-bindings: phy: rcar-gen2: Add r8a7744 support
dt-bindings: can: rcar_can: Add r8a7744 support
dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
dt-bindings: thermal: rcar: Add device tree support for r8a7744
Documentation: dt: Add binding for /secure-chosen/stdout-path
dt-bindings: arm: zte: Move sysctrl bindings to their own doc
...
Pull locking and misc x86 updates from Ingo Molnar:
"Lots of changes in this cycle - in part because locking/core attracted
a number of related x86 low level work which was easier to handle in a
single tree:
- Linux Kernel Memory Consistency Model updates (Alan Stern, Paul E.
McKenney, Andrea Parri)
- lockdep scalability improvements and micro-optimizations (Waiman
Long)
- rwsem improvements (Waiman Long)
- spinlock micro-optimization (Matthew Wilcox)
- qspinlocks: Provide a liveness guarantee (more fairness) on x86.
(Peter Zijlstra)
- Add support for relative references in jump tables on arm64, x86
and s390 to optimize jump labels (Ard Biesheuvel, Heiko Carstens)
- Be a lot less permissive on weird (kernel address) uaccess faults
on x86: BUG() when uaccess helpers fault on kernel addresses (Jann
Horn)
- macrofy x86 asm statements to un-confuse the GCC inliner. (Nadav
Amit)
- ... and a handful of other smaller changes as well"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
locking/lockdep: Make global debug_locks* variables read-mostly
locking/lockdep: Fix debug_locks off performance problem
locking/pvqspinlock: Extend node size when pvqspinlock is configured
locking/qspinlock_stat: Count instances of nested lock slowpaths
locking/qspinlock, x86: Provide liveness guarantee
x86/asm: 'Simplify' GEN_*_RMWcc() macros
locking/qspinlock: Rework some comments
locking/qspinlock: Re-order code
locking/lockdep: Remove duplicated 'lock_class_ops' percpu array
x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y
futex: Replace spin_is_locked() with lockdep
locking/lockdep: Make class->ops a percpu counter and move it under CONFIG_DEBUG_LOCKDEP=y
x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs
x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs
x86/extable: Macrofy inline assembly code to work around GCC inlining bugs
x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops
x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs
x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs
x86/refcount: Work around GCC inlining bug
x86/objtool: Use asm macros to work around GCC inlining bugs
...
We have raised the compiler requirement from time to time.
With commit cafa0010cd ("Raise the minimum required gcc version
to 4.6"), the minimum for GCC is 4.6 now.
This flag was added by GCC 4.6, and it is recognized by ICC as well.
It is true that Clang does not support this flag but this commit is
just touching the else part of the "ifeq ($(cc-name),clang)" check.
Hence, Clang build is not affected.
Let's rip off the cc-disable-warning switch, and see if somebody
complains about it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
We have raised the compiler requirement from time to time.
With commit cafa0010cd ("Raise the minimum required gcc version
to 4.6"), the minimum for GCC is 4.6 now.
This flag has been here since the pre-git era. It is documented in
the GCC 4.6 manual, and it is recognized by Clang and ICC as well.
Let's rip off the cc-option switch, and see if somebody complains
about it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
We have raised the compiler requirement from time to time.
With commit cafa0010cd ("Raise the minimum required gcc version
to 4.6"), the minimum for GCC is 4.6 now.
The -Wno-pointer-sign has been here since the pre-git era. It is
documented in the GCC 4.6 manual, and it is recognized by Clang
and ICC as well.
Let's rip off the cc-disable-warning switch, and see if somebody
complains about it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
- Fix warnings from recordmcount.pl when building with Clang
- Allow Clang to use GNU toolchains correctly
- Disable CONFIG_SAMPLES for UML to avoid build error
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bOon
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Masahiro writes:
"Kbuild fixes for v4.19 (2nd)
- Fix warnings from recordmcount.pl when building with Clang
- Allow Clang to use GNU toolchains correctly
- Disable CONFIG_SAMPLES for UML to avoid build error"
* tag 'kbuild-fixes-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
samples: disable CONFIG_SAMPLES for UML
kbuild: allow to use GCC toolchain not in Clang search path
ftrace: Build with CPPFLAGS to get -Qunused-arguments
Since $(objtree) is always '.', it is not useful to pass it to
scripts/mkmakefile. I assume nobody wants to run this script directly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The --include-dir flag is used to include check-in Makefiles from
$(objtree) without $(srctree)/ prefix. Obviously, this is unneeded
for in-tree build. Add the flag just before changing the working
directory.
This becomes effective after invoking sub-make. Add a little bit
comments about it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Using macros in inline assembly allows us to work around bugs
in GCC's inlining decisions.
Compile macros.S and use it to assemble all C files.
Currently only x86 will use it.
Background:
The inlining pass of GCC doesn't include an assembler, so it's not aware
of basic properties of the generated code, such as its size in bytes,
or that there are such things as discontiuous blocks of code and data
due to the newfangled linker feature called 'sections' ...
Instead GCC uses a lazy and fragile heuristic: it does a linear count of
certain syntactic and whitespace elements in inlined assembly block source
code, such as a count of new-lines and semicolons (!), as a poor substitute
for "code size and complexity".
Unsurprisingly this heuristic falls over and breaks its neck whith certain
common types of kernel code that use inline assembly, such as the frequent
practice of putting useful information into alternative sections.
As a result of this fresh, 20+ years old GCC bug, GCC's inlining decisions
are effectively disabled for inlined functions that make use of such asm()
blocks, because GCC thinks those sections of code are "large" - when in
reality they are often result in just a very low number of machine
instructions.
This absolute lack of inlining provess when GCC comes across such asm()
blocks both increases generated kernel code size and causes performance
overhead, which is particularly noticeable on paravirt kernels, which make
frequent use of these inlining facilities in attempt to stay out of the
way when running on baremetal hardware.
Instead of fixing the compiler we use a workaround: we set an assembly macro
and call it from the inlined assembly block. As a result GCC considers the
inline assembly block as a single instruction. (Which it often isn't but I digress.)
This uglifies and bloats the source code - for example just the refcount
related changes have this impact:
Makefile | 9 +++++++--
arch/x86/Makefile | 7 +++++++
arch/x86/kernel/macros.S | 7 +++++++
scripts/Kbuild.include | 4 +++-
scripts/mod/Makefile | 2 ++
5 files changed, 26 insertions(+), 3 deletions(-)
Yay readability and maintainability, it's not like assembly code is hard to read
and maintain ...
We also hope that GCC will eventually get fixed, but we are not holding
our breath for that. Yet we are optimistic, it might still happen, any decade now.
[ mingo: Wrote new changelog describing the background. ]
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/20181003213100.189959-3-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is nothing arch specific about building dtb files other than their
location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
The dependencies and supported targets are all slightly different.
Also, a cross-compiler for each arch is needed, but really the host
compiler preprocessor is perfectly fine for building dtbs. Move the
build rules to a common location and remove the arch specific ones. This
is done in a single step to avoid warnings about overriding rules.
The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
These pull in several dependencies some of which need a target compiler
(specifically devicetable-offsets.h) and aren't needed to build dtbs.
All that is really needed is dtc, so adjust the dependencies to only be
dtc.
This change enables support 'dtbs_install' on some arches which were
missing the target.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-mips@linux-mips.org
Cc: nios2-dev@lists.rocketboards.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Rob Herring <robh@kernel.org>
When using a GCC cross toolchain which is not in a compiled in
Clang search path, Clang reverts to the system assembler and
linker. This leads to assembler or linker errors, depending on
which tool is first used for a given architecture.
It seems that Clang is not searching $PATH for a matching
assembler or linker.
Make sure that Clang picks up the correct assembler or linker by
passing the cross compilers bin directory as search path.
This allows to use Clang provided by distributions with GCC
toolchains not in /usr/bin.
Link: https://github.com/ClangBuiltLinux/linux/issues/78
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-and-tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This Kselftest fixes update for 4.9-rc5 consists of:
-- fixes to build failures
-- fixes to add missing config files to increase test coverage
-- fixes to cgroup test and a new cgroup test for memory.oom.group
-----BEGIN PGP SIGNATURE-----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=79Fh
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pulled kselftest fixes from Shuah:
"This Kselftest fixes update for 4.9-rc5 consists of:
-- fixes to build failures
-- fixes to add missing config files to increase test coverage
-- fixes to cgroup test and a new cgroup test for memory.oom.group"
Nobody sets 'targets' in the top-level Makefile or arch/*/Makefile,
hence $(targets) is empty.
$(wildcard .*.cmd) will do for including the .vmlinux.cmd file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When mixed/config targets are being processed, the top Makefile
does not need to parse the rest of targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As a Kernel developer, I make heavy use of "make targz-pkg" in order
to locally compile and remotely install my development Kernels. The
nice feature I rely on is that after a normal "make", "make targz-pkg"
only generates the tarball without having to recompile everything.
That was true until commit f28bc3c32c ("tracing: Handle
CC_FLAGS_FTRACE more accurately"). After it, running "make targz-pkg"
after "make" will recompile the whole Kernel tree, making my
development workflow much slower.
The Kernel is choosing to recompile everything because it claims the
command line has changed. A diff of the .cmd files show a repeated
-mfentry in one of the files. That is because "make targz-pkg" calls
"make modules_install" and the environment is already populated with
the exported variables, CC_FLAGS_FTRACE being one of them. Then,
-mfentry gets duplicated because it is not protected behind an ifndef
block, like -pg.
To complicate the problem a little bit more, architectures can define
their own version CC_FLAGS_FTRACE, so our code not only has to
consider recursive Makefiles, but also architecture overrides.
So in this patch we move CC_FLAGS_FTRACE up and unconditionally
define it to -pg. Then we let the architecture Makefiles possibly
override it, and finally append the extra options later. This ensures
the variable is always fully redefined at each invocation so recursive
Makefiles don't keep appending, and hopefully it maintains the
intended behavior on how architectures can override the defaults..
Thanks Steven Rostedt and Vasily Gorbik for the help on this
regression.
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: linux-kbuild@vger.kernel.org
Fixes: commit f28bc3c32c ("tracing: Handle CC_FLAGS_FTRACE more accurately")
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the kernel headers aren't installed we can't build all the tests.
Add a new make target rule 'khdr' in the file lib.mk to generate the
kernel headers and that gets include for every test-dir Makefile that
includes lib.mk If the testdir in turn have its own sub-dirs the
top_srcdir needs to be set to the linux-rootdir to be able to generate
the kernel headers.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Pull x86 fixes from Thomas Gleixner:
- Correct the L1TF fallout on 32bit and the off by one in the 'too much
RAM for protection' calculation.
- Add a helpful kernel message for the 'too much RAM' case
- Unbreak the VDSO in case that the compiler desides to use indirect
jumps/calls and emits retpolines which cannot be resolved because the
kernel uses its own thunks, which does not work for the VDSO. Make it
use the builtin thunks.
- Re-export start_thread() which was unexported when the 32/64bit
implementation was unified. start_thread() is required by modular
binfmt handlers.
- Trivial cleanups
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/l1tf: Suggest what to do on systems with too much RAM
x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM
x86/kvm/vmx: Remove duplicate l1d flush definitions
x86/speculation/l1tf: Fix overflow in l1tf_pfn_limit() on 32bit
x86/process: Re-export start_thread()
x86/mce: Add notifier_block forward declaration
x86/vdso: Fix vDSO build if a retpoline is emitted
Commit a0f97e06a4 ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.
Commit 222d394d30 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.
Commit 06c5040cdb ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.
For some reason, LDFLAGS was not renamed.
Using a well-known variable like LDFLAGS may result in accidental
override of the variable.
Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.
I did not touch Makefiles under tools/ since the tools build system
is a different world.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
This config option should be enabled only when both the compiler and
the linker support necessary flags. Add proper dependencies to Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As commit ebaad7d364 ("kbuild: rpm: prompt to use "rpm-pkg" if "rpm"
target is used") noticed, the "rpm" target is now removed.
I assume people have already migrated to "rpm-pkg".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of
a lot of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockde and the latency tracers
just get called directly (without using the trace events).
But because the original change cleaned up the code very nicely
we kept that, as well as the trace events for preempt and irqs
disabling, but they are limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not
allow them to be called in NMI context. Waiting till Paul makes
an NMI safe SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested
before the merge window opened.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
=vgEr
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of a lot
of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockdep and the latency tracers just
get called directly (without using the trace events). But because the
original change cleaned up the code very nicely we kept that, as well
as the trace events for preempt and irqs disabling, but they are
limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not allow
them to be called in NMI context. Waiting till Paul makes an NMI safe
SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested before
the merge window opened.
* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix SPDX format headers to use C++ style comments
tracing: Add SPDX License format tags to tracing files
tracing: Add SPDX License format to bpf_trace.c
blktrace: Add SPDX License format header
s390/ftrace: Add -mfentry and -mnop-mcount support
tracing: Add -mcount-nop option support
tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
tracing: Handle CC_FLAGS_FTRACE more accurately
Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
Uprobes: Simplify uprobe_register() body
tracepoints: Free early tracepoints after RCU is initialized
uprobes: Use synchronize_rcu() not synchronize_sched()
tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
ftrace: Remove unused pointer ftrace_swapper_pid
tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing/irqsoff: Handle preempt_count for different configs
tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing: irqsoff: Account for additional preempt_disable
trace: Use rcu_dereference_raw for hooks from trace-event subsystem
tracing/kprobes: Fix within_notrace_func() to check only notrace functions
...
Currently, if the vDSO ends up containing an indirect branch or
call, GCC will emit the "external thunk" style of retpoline, and it
will fail to link.
Fix it by building the vDSO with inline retpoline thunks.
I haven't seen any reports of this triggering on an unpatched
kernel.
Fixes: commit 76b043848f ("x86/retpoline: Add initial retpoline support")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Matt Rickard <matt@softrans.com.au>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jason Vas Dias <jason.vas.dias@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/c76538cd3afbe19c6246c2d1715bc6a60bd63985.1534448381.git.luto@kernel.org
-mcount-nop gcc option generates the calls to the profiling functions
as nops which allows to avoid patching mcount jump with NOP instructions
initially.
-mcount-nop gcc option will be activated if platform selects
HAVE_NOP_MCOUNT and gcc actually supports it.
In addition to that CC_USING_NOP_MCOUNT is defined and could be used by
architectures to adapt ftrace patching behavior.
Link: http://lkml.kernel.org/r/patch-3.thread-aa7b8d.git-e02ed2dc082b.your-ad-here.call-01533557518-ext-9465@work.hours
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently if CONFIG_FTRACE_MCOUNT_RECORD is enabled -mrecord-mcount
compiler flag support is tested for every Makefile.
Top 4 cc-option usages:
511 -mrecord-mcount
11 -fno-stack-protector
9 -Wno-override-init
2 -fsched-pressure
To address that move cc-option from scripts/Makefile.build to top Makefile
and export CC_USING_RECORD_MCOUNT to be used in original place.
While doing that also add -mrecord-mcount to CC_FLAGS_FTRACE (if gcc
actually supports it).
Link: http://lkml.kernel.org/r/patch-2.thread-aa7b8d.git-de935bace15a.your-ad-here.call-01533557518-ext-9465@work.hours
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
CC_FLAGS_FTRACE is exported and later used to remove ftrace relevant
build flags from files which should be built without ftrace support.
For that reason add -mfentry to CC_FLAGS_FTRACE as well. That fixes
a problem with vdso32 build on s390, where -mfentry could not be used
together with -m31 flag.
At the same time flags like -pg and -mfentry are not relevant for asm
files, so avoid adding them to KBUILD_AFLAGS.
Introduce CC_FLAGS_USING instead of CC_USING_FENTRY to collect
-DCC_USING_FENTRY (and future alike) which are relevant for both
KBUILD_CFLAGS and KBUILD_AFLAGS.
Link: http://lkml.kernel.org/r/patch-1.thread-aa7b8d.git-42971afe87de.your-ad-here.call-01533557518-ext-9465@work.hours
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- show clearer error messages where pkg-config is needed, but not
installed
- rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics
- create all necessary directories by Kconfig tool itself instead
of Makefile
- update the .config unconditionally when syncconfig is invoked
- use 'include' directive instead of '-include' where
include/config/{auto,tristate}.conf is mandatory
- do not try to update the .config when running install targets
- add .DELETE_ON_ERROR to delete partially updated files
- misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/Dow
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- show clearer error messages where pkg-config is needed, but not
installed
- rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics
- create all necessary directories by Kconfig tool itself instead of
Makefile
- update the .config unconditionally when syncconfig is invoked
- use 'include' directive instead of '-include' where
include/config/{auto,tristate}.conf is mandatory
- do not try to update the .config when running install targets
- add .DELETE_ON_ERROR to delete partially updated files
- misc cleanups and fixes
* tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove P_ENV property type
kconfig: remove unused sym_get_env_prop() function
kconfig: fix the rule of mainmenu_stmt symbol
init/Kconfig: Use short unix-style option instead of --longname
Kbuild: Makefile.modbuiltin: include auto.conf and tristate.conf mandatory
kbuild: remove auto.conf from prerequisite of phony targets
kbuild: do not update config for 'make kernelrelease'
kbuild: do not update config when running install targets
kbuild: add .DELETE_ON_ERROR special target
kbuild: use 'include' directive to load auto.conf from top Makefile
kconfig: allow all config targets to write auto.conf if missing
kconfig: make syncconfig update .config regardless of sym_change_count
kconfig: create directories needed for syncconfig by itself
kconfig: remove unneeded directory generation from local*config
kconfig: split out useful helpers in confdata.c
kconfig: rename file_write_dep and move it to confdata.c
kconfig: fix typos in description of "choice" in kconfig-language.txt
kconfig: handle format string before calling conf_message_callback()
kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE
kconfig: check for pkg-config on make {menu,n,g,x}config
- verify depmod is installed before modules_install
- support build salt in case build ids must be unique between builds
- allow users to specify additional host compiler flags via HOST*FLAGS,
and rename internal variables to KBUILD_HOST*FLAGS
- update buildtar script to drop vax support, add arm64 support
- update builddeb script for better debarch support
- document the pit-fall of if_changed usage
- fix parallel build of UML with O= option
- make 'samples' target depend on headers_install to fix build errors
- remove deprecated host-progs variable
- add a new coccinelle script for refcount_t vs atomic_t check
- improve double-test coccinelle script
- misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VjfG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- verify depmod is installed before modules_install
- support build salt in case build ids must be unique between builds
- allow users to specify additional host compiler flags via HOST*FLAGS,
and rename internal variables to KBUILD_HOST*FLAGS
- update buildtar script to drop vax support, add arm64 support
- update builddeb script for better debarch support
- document the pit-fall of if_changed usage
- fix parallel build of UML with O= option
- make 'samples' target depend on headers_install to fix build errors
- remove deprecated host-progs variable
- add a new coccinelle script for refcount_t vs atomic_t check
- improve double-test coccinelle script
- misc cleanups and fixes
* tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
coccicheck: return proper error code on fail
Coccinelle: doubletest: reduce side effect false positives
kbuild: remove deprecated host-progs variable
kbuild: make samples really depend on headers_install
um: clean up archheaders recipe
kbuild: add %asm-generic to no-dot-config-targets
um: fix parallel building with O= option
scripts: Add Python 3 support to tracing/draw_functrace.py
builddeb: Add automatic support for sh{3,4}{,eb} architectures
builddeb: Add automatic support for riscv* architectures
builddeb: Add automatic support for m68k architecture
builddeb: Add automatic support for or1k architecture
builddeb: Add automatic support for sparc64 architecture
builddeb: Add automatic support for mips{,64}r6{,el} architectures
builddeb: Add automatic support for mips64el architecture
builddeb: Add automatic support for ppc64 and powerpcspe architectures
builddeb: Introduce functions to simplify kconfig tests in set_debarch
builddeb: Drop check for 32-bit s390
builddeb: Change architecture detection fallback to use dpkg-architecture
builddeb: Skip architecture detection when KBUILD_DEBARCH is set
...
Kernel headers must be installed into $(objtree)/usr/include to avoid
the build failure of samples.
Commit ddea05fa14 ("kbuild: make samples depend on headers_install")
addressed this, but "samples/" is only used for the single target build.
"make samples/" properly installs kernel headers, but it does not work
for general building because a phony target "sample" (no trailing slash)
is used.
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: David Howells <dhowells@redhat.com>
asm-generic and uapi-asm-generic do not depend on the kernel
configuration. In fact, uapi-asm-generic is the prerequisite of
headers_{install,check}, hence it should not require the .config file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Richard Weinberger <richard@nod.at>
Currently, filechk unconditionally opens the first prerequisite and
redirects it as the stdin of a filechk_* rule. Hence, every target
using $(call filechk,...) must list something as the first prerequisite
even if it is unneeded.
'< $<' is actually unneeded in most cases. Each rule can explicitly
adds it if necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The top-level Makefile adds include/config/auto.conf as
prerequisites of 'scripts', 'prepare1', etc.
They were needed to terminate the build when include/config/auto.conf
is missing.
Now that the inclusion of include/config/auto.conf is mandatory
in the top-level Makefile if dot-config is 1 (Note 'include' directive
is used instead of '-include').
Make terminates the build by itself if it fails to create or update
include/config/auto.conf so we are sure that include/config/auto.conf
exists in the very first stage of make.
I am still keeping include/config/auto.conf as the prerequisite of
%/modules.builtin because modules.builtin is a real file. According
to commit a6c366324c ("kbuild: Do not unnecessarily regenerate
modules.builtin"), it is intentional to compare time-stamps between
%/modules.builtin and include/config/auto.conf . I moved tristate.conf
here because it is only included from scripts/Makefile.modbuiltin.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
'make kernelrelease' depends on CONFIG_LOCALVERSION(_AUTO), but
for the same reason as install targets, we do not want to update
the configuration just for printing the kernelrelease string.
This is likely to happen when you compiled the kernel with
CROSS_COMPILE, but forget to pass it to 'make kernelrelease'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
"make syncconfig" is automatically invoked when any of the following
happens:
- .config is updated
- any of Kconfig files is updated
- any of environment variables referenced in Kconfig is changed
Then, it updates configuration files such as include/config/auto.conf
include/generated/autoconf.h, etc.
Even install targets (install, modules_install, etc.) are no exception.
However, they should never ever modify the source tree. Install
targets are often run with root privileges. Once those configuration
files are owned by root, "make mrproper" would end up with permission
error.
Install targets should just copy things blindly. They should not care
whether the configuration is up-to-date or not. This makes more sense
because we are interested in the configuration that was used in the
previous kernel building.
This issue has existed since before, but rarely happened. I expect
more chance where people are hit by this; with the new Kconfig syntax
extension, the .config now contains the compiler information. If you
cross-compile the kernel with CROSS_COMPILE, but forget to pass it
for "make install", you meet "any of environment variables referenced
in Kconfig is changed" because $(CC) is referenced in Kconfig.
Another scenario is the compiler upgrade before the installation.
Install targets need the configuration. "make modules_install" refer
to CONFIG_MODULES etc. "make dtbs_install" also needs CONFIG_ARCH_*
to decide which dtb files to install. However, the auto-update of
the configuration files should be avoided. We already do this for
external modules.
Now, Make targets are categorized into 3 groups:
[1] Do not need the kernel configuration at all
help, coccicheck, headers_install etc.
[2] Need the latest kernel configuration
If new config options are added, Kconfig will show prompt to
ask user's selection.
Build targets such as vmlinux, in-kernel modules are the cases.
[3] Need the kernel configuration, but do not want to update it
Install targets except headers_install, and external modules
are the cases.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When you build targets that require the kernel configuration, dot-config
is set to 1, then the top-level Makefile includes auto.conf. However,
Make considers its inclusion is optional because the '-include' directive
is used here.
If a necessary configuration file is missing for the external module
building, the following error message is displayed:
ERROR: Kernel configuration is invalid.
include/generated/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.
However, Make still continues building; /bin/false let the creation of
'include/config/auto.config' fail, but Make can ignore the error since
it is included by the '-include' directive.
I guess the reason of using '-include' directive was to suppress
the warning when you build the kernel from a pristine source tree:
Makefile:605: include/config/auto.conf: No such file or directory
The previous commit made sure include/config/auto.conf exists after
the 'make *config' stage. Now, we can use the 'include' directive
without showing the warning.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now that we have the rename in place, reuse the HOST*FLAGS options as
something that can be set from the command line and included with the
rest of the flags.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS
to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not
have any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line CXXFLAGS, re-name HOSTCXXFLAGS
to KBUILD_HOSTCXXFLAGS as the internal use only flags. This should not
have any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- update Kbuild and Kconfig documents
- sanitize -I compiler option handling
- update extract-vmlinux script to recognize LZ4 and ZSTD
- fix tools Makefiles
- update tags.sh to handle __ro_after_init
- suppress warnings in case getconf does not recognize LFS_* parameters
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aXcg
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- update Kbuild and Kconfig documents
- sanitize -I compiler option handling
- update extract-vmlinux script to recognize LZ4 and ZSTD
- fix tools Makefiles
- update tags.sh to handle __ro_after_init
- suppress warnings in case getconf does not recognize LFS_* parameters
* tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: suppress warnings from 'getconf LFS_*'
scripts/tags.sh: add __ro_after_init
tools: build: Use HOSTLDFLAGS with fixdep
tools: build: Fixup host c flags
tools build: fix # escaping in .cmd files for future Make
scripts: teach extract-vmlinux about LZ4 and ZSTD
kbuild: remove duplicated comments about PHONY
kbuild: .PHONY is not a variable, but PHONY is
kbuild: do not drop -I without parameter
kbuild: document the KBUILD_KCONFIG env. variable
kconfig: update user kconfig tools doc.
kbuild: delete INSTALL_FW_PATH from kbuild documentation
kbuild: update ARCH alias info for sparc
kbuild: update ARCH alias info for sh
Suppress warnings for systems that do not recognize LFS_*.
getconf: no such configuration parameter `LFS_CFLAGS'
getconf: no such configuration parameter `LFS_LDFLAGS'
getconf: no such configuration parameter `LFS_LIBS'
Fixes: d7f14c66c2 ("kbuild: Enable Large File Support for hostprogs")
Reported-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Pull networking fixes from David Miller:
1) Verify netlink attributes properly in nf_queue, from Eric Dumazet.
2) Need to bump memory lock rlimit for test_sockmap bpf test, from
Yonghong Song.
3) Fix VLAN handling in lan78xx driver, from Dave Stevenson.
4) Fix uninitialized read in nf_log, from Jann Horn.
5) Fix raw command length parsing in mlx5, from Alex Vesker.
6) Cleanup loopback RDS connections upon netns deletion, from Sowmini
Varadhan.
7) Fix regressions in FIB rule matching during create, from Jason A.
Donenfeld and Roopa Prabhu.
8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren.
9) More bpfilter build fixes/adjustments from Masahiro Yamada.
10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper
Dangaard Brouer.
11) fib_tests.sh file permissions were broken, from Shuah Khan.
12) Make sure BH/preemption is disabled in data path of mac80211, from
Denis Kenzior.
13) Don't ignore nla_parse_nested() return values in nl80211, from
Johannes berg.
14) Properly account sock objects ot kmemcg, from Shakeel Butt.
15) Adjustments to setting bpf program permissions to read-only, from
Daniel Borkmann.
16) TCP Fast Open key endianness was broken, it always took on the host
endiannness. Whoops. Explicitly make it little endian. From Yuching
Cheng.
17) Fix prefix route setting for link local addresses in ipv6, from
David Ahern.
18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva.
19) Various bpf sockmap fixes, from John Fastabend.
20) Use after free for GRO with ESP, from Sabrina Dubroca.
21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from
Eric Biggers.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
qede: Adverstise software timestamp caps when PHC is not available.
qed: Fix use of incorrect size in memcpy call.
qed: Fix setting of incorrect eswitch mode.
qed: Limit msix vectors in kdump kernel to the minimum required count.
ipvlan: call dev_change_flags when ipvlan mode is reset
ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
net: fix use-after-free in GRO with ESP
tcp: prevent bogus FRTO undos with non-SACK flows
bpf: sockhash, add release routine
bpf: sockhash fix omitted bucket lock in sock_close
bpf: sockmap, fix smap_list_map_remove when psock is in many maps
bpf: sockmap, fix crash when ipv6 sock is added
net: fib_rules: bring back rule_exists to match rule during add
hv_netvsc: split sub-channel setup into async and sync
net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN
atm: zatm: Fix potential Spectre v1
s390/qeth: consistently re-enable device features
s390/qeth: don't clobber buffer on async TX completion
s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]
s390/qeth: fix race when setting MAC address
...
With the brand-new syntax extension of Kconfig, we can directly
check the compiler capability in the configuration phase.
If the cc-can-link.sh fails, the BPFILTER_UMH is automatically
hidden by the dependency.
I also deleted 'default n', which is no-op.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.
That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.
HOWEVER.
It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_CC_STACKPROTECTOR_AUTO=y
and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.
The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one. This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).
This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As Documentation/kbuild/kconfig-language.txt notes, 'select' should be
be used with care - it forces a lower limit of another symbol, ignoring
the dependency. Currently, KCOV can select GCC_PLUGINS even if arch
does not select HAVE_GCC_PLUGINS. This could cause the unmet direct
dependency.
Now that Kconfig can test compiler capability, let's handle this in a
more sophisticated way.
There are two ways to enable KCOV; use the compiler that natively
supports -fsanitize-coverage=trace-pc, or build the SANCOV plugin if
the compiler has ability to build GCC plugins. Hence, the correct
dependency for KCOV is:
depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS
You do not need to build the SANCOV plugin if the compiler already
supports -fsanitize-coverage=trace-pc. Hence, the select should be:
select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC
With this, GCC_PLUGIN_SANCOV is selected only when necessary, so
scripts/Makefile.gcc-plugins can be cleaner.
I also cleaned up Kconfig and scripts/Makefile.kcov as well.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Move the test for -fstack-protector(-strong) option to Kconfig.
If the compiler does not support the option, the corresponding menu
is automatically hidden. If STRONG is not supported, it will fall
back to REGULAR. If REGULAR is not supported, it will be disabled.
This means, AUTO is implicitly handled by the dependency solver of
Kconfig, hence removed.
I also turned the 'choice' into only two boolean symbols. The use of
'choice' is not a good idea here, because all of all{yes,mod,no}config
would choose the first visible value, while we want allnoconfig to
disable as many features as possible.
X86 has additional shell scripts in case the compiler supports those
options, but generates broken code. I added CC_HAS_SANE_STACKPROTECTOR
to test this. I had to add -m32 to gcc-x86_32-has-stack-protector.sh
to make it work correctly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Commit 21c54b7747 ("kconfig: show compiler version text in the top
comment") was intended to detect the compiler upgrade, but Geert
reported a breakage on the m68k build.
The compiler upgrade is detected by the change of the environment
variable, CC_VERSION_TEXT, which contains the first line of the output
from $(CC) --version. Currently, this works well when CROSS_COMPILE
is given via the environment variable or the Make command line.
However, some architectures such as m68k can specify CROSS_COMPILE
from arch/$(SRCARCH)/Makefile as well. In this case, "make ARCH=m68k"
ends up with endless syncconfig loop.
$ make ARCH=m68k defconfig
*** Default configuration is based on 'multi_defconfig'
#
# configuration written to .config
#
$ make ARCH=m68k
scripts/kconfig/conf --syncconfig Kconfig
scripts/kconfig/conf --syncconfig Kconfig
scripts/kconfig/conf --syncconfig Kconfig
scripts/kconfig/conf --syncconfig Kconfig
Things are happening like this:
Because arch/$(SRCARCH)/Makefile is included after CC_VERSION_TEXT
is set, it contains the host compiler version in the defconfig phase.
To create or update auto.conf, the following line is triggered:
include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
This recurses the top Makefile after arch/$(SRCARCH)/Makefile is
included. CROSS_COMPILE is set to a m68k toolchain prefix and
exported to the recursed Make. Then, syncconfig is invoked with
the target compiler version in CC_VERSION_TEXT.
The Make will restart because auto.conf and auto.conf.cmd have been
updated. At this point, CROSS_COMPILE is reset, so CC_VERSION_TEXT
is set to the host compiler version again. Then, syncconfig is
triggered due to the change of CC_VERSION_TEXT. This loop continues
eternally.
To fix this problem, $(CC_VERSION_TEXT) must be evaluated only after
arch/$(SRCARCH)/Makefile. Setting it earlier is OK as long as it is
defined by using the '=' operator instead of ':='.
For the defconfig phase, $(CC_VERSION_TEXT) is evaluated when Kbuild
descends into scripts/kconfig/, so it contains the target compiler
version correctly.
include/config/auto.conf.cmd references $(CC_VERSION_TEXT) as well,
so it must be included after arch/$(SRCARCH)/Makefile.
Fixes: 21c54b7747 ("kconfig: show compiler version text in the top comment")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
Kconfig now supports new functionality to perform textual substitution.
It has been a while since Linus suggested to move compiler option tests
from makefiles to Kconfig. Finally, here it is. The implementation has
been generalized into a Make-like macro language. Some built-in functions
such as 'shell' are provided. Variables and user-defined functions are
also supported so that 'cc-option', 'ld-option', etc. are implemented as
macros.
Summary:
- refactor package checks for building {m,n,q,g}conf
- remove unused/unmaintained localization support
- remove Kbuild cache
- drop CONFIG_CROSS_COMPILE support
- replace 'option env=' with direct variable expansion
- add built-in functions such as 'shell'
- support variables and user-defined functions
- add helper macros as as 'cc-option'
- add unit tests and a document of the new macro language
- add 'testconfig' to help
- fix warnings from GCC 8.1
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=o37+
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
"Kconfig now supports new functionality to perform textual
substitution. It has been a while since Linus suggested to move
compiler option tests from makefiles to Kconfig. Finally, here it is.
The implementation has been generalized into a Make-like macro
language.
Some built-in functions such as 'shell' are provided. Variables and
user-defined functions are also supported so that 'cc-option',
'ld-option', etc. are implemented as macros.
Summary:
- refactor package checks for building {m,n,q,g}conf
- remove unused/unmaintained localization support
- remove Kbuild cache
- drop CONFIG_CROSS_COMPILE support
- replace 'option env=' with direct variable expansion
- add built-in functions such as 'shell'
- support variables and user-defined functions
- add helper macros as as 'cc-option'
- add unit tests and a document of the new macro language
- add 'testconfig' to help
- fix warnings from GCC 8.1"
* tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kconfig: Avoid format overflow warning from GCC 8.1
kbuild: Move last word of nconfig help to the previous line
kconfig: Add testconfig into make help output
kconfig: add basic helper macros to scripts/Kconfig.include
kconfig: show compiler version text in the top comment
kconfig: test: add Kconfig macro language tests
Documentation: kconfig: document a new Kconfig macro language
kconfig: error out if a recursive variable references itself
kconfig: add 'filename' and 'lineno' built-in variables
kconfig: add 'info', 'warning-if', and 'error-if' built-in functions
kconfig: expand lefthand side of assignment statement
kconfig: support append assignment operator
kconfig: support simply expanded variable
kconfig: support user-defined function and recursively expanded variable
kconfig: begin PARAM state only when seeing a command keyword
kconfig: replace $(UNAME_RELEASE) with function call
kconfig: add 'shell' built-in function
kconfig: add built-in function support
kconfig: make default prompt of mainmenu less specific
kconfig: remove sym_expand_string_value()
...
- improve fixdep to coalesce consecutive slashes in dep-files
- fix some issues of the maintainer string generation in deb-pkg script
- remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
several tools and linker scripts
- clean-up modpost
- allow to enable the dead code/data elimination for PowerPC in EXPERT mode
- improve two coccinelle scripts for better performance
- pass endianness and machine size flags to sparse for all architecture
- misc fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2LYT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- improve fixdep to coalesce consecutive slashes in dep-files
- fix some issues of the maintainer string generation in deb-pkg script
- remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
several tools and linker scripts
- clean-up modpost
- allow to enable the dead code/data elimination for PowerPC in EXPERT
mode
- improve two coccinelle scripts for better performance
- pass endianness and machine size flags to sparse for all architecture
- misc fixes
* tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: add machine size to CHECKFLAGS
kbuild: add endianness flag to CHEKCFLAGS
kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice
scripts: Fixed printf format mismatch
scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation
coccinelle: deref_null: improve performance
coccinelle: mini_lock: improve performance
powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected
kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled
kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build
kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION
modpost: constify *modname function argument where possible
modpost: remove redundant is_vmlinux() test
modpost: use strstarts() helper more widely
modpost: pass struct elf_info pointer to get_modinfo()
checkpatch: remove VMLINUX_SYMBOL() check
vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL()
kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
export.h: remove code for prefixing symbols with underscore
depmod.sh: remove symbol prefix support
...
check that CC can build executables and use that compiler instead of HOSTCC
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
By default, sparse assumes a 64bit machine when compiled on x86-64
and 32bit when compiled on anything else.
This can of course create all sort of problems for the other archs, like
issuing false warnings ('shift too big (32) for type unsigned long'), or
worse, failing to emit legitimate warnings.
Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT,
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the now unneeded -m32/-m64 in arch specific Makefiles.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The kernel depends on macros like __BYTE_ORDER__,
__BIG_ENDIAN__ or __LITTLE_ENDIAN__.
OTOH, sparse doesn't know about the endianness of the kernel and
by default uses the same as the machine on which sparse was built.
Ensure that sparse can predefine the macros corresponding to
how the kernel was configured by adding -m{big,little}-endian
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the equivalent done in arch specific Makefiles.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, $(CHECK) receives NOSTDINC_FLAGS twice:
* first directly in the main Makefile via CHECKFLAGS,
* then indirectly in scripts/Makefile.build via c_flags.
Since once is enough, leave the occurence via c_flags and
remove the one via CHECKFLAGS.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The kernel configuration phase is now tightly coupled with the compiler
in use. It will be nice to show the compiler information in Kconfig.
The compiler information will be displayed like this:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- config
scripts/kconfig/conf --oldaskconfig Kconfig
*
* Linux/arm64 4.16.0-rc1 Kernel Configuration
*
*
* Compiler: aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011
*
*
* General setup
*
Compile also drivers which will not load (COMPILE_TEST) [N/y/?]
If you use GUI methods such as menuconfig, it will be displayed in the
top menu.
This is simply implemented by using the 'comment' statement. So, it
will be saved into the .config file as well.
This commit has a very important meaning. If the compiler is upgraded,
Kconfig must be re-run since different compilers have different sets
of supported options.
All referenced environments are written to include/config/auto.conf.cmd
so that any environment change triggers syncconfig, and prompt the user
to input new values if needed.
With this commit, something like follows will be added to
include/config/auto.conf.cmd
ifneq "$(CC_VERSION_TEXT)" "aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011"
include/config/auto.conf: FORCE
endif
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Now that 'shell' function is supported, this can be self-contained in
Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax. It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.
Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
- conf_expand_value()
This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
- sym_expand_string_value()
This is used to expand strings in 'source' and 'mainmenu'
All of them are fixed values independent of user configuration. So,
they can be changed into the direct expansion instead of symbols.
This change makes the code much cleaner. The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.
sym_init() hard-coding 'UNAME_RELEASE' is also gone. 'UNAME_RELEASE'
should be replaced with an environment variable.
ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.
The new syntax is addicted by Make. The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F. Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.
At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.
The variables are expanded in the lexer so we can simplify the token
handling on the parser side.
For example, the following code works.
[Example code]
config MY_TOOLCHAIN_LIST
string
default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"
[Result]
$ make -s alldefconfig && tail -n 1 .config
CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Kbuild provides a couple of ways to specify CROSS_COMPILE:
[1] Command line
[2] Environment
[3] arch/*/Makefile (only some architectures)
[4] CONFIG_CROSS_COMPILE
[4] is problematic for the compiler capability tests in Kconfig.
CONFIG_CROSS_COMPILE allows users to change the compiler prefix from
'make menuconfig', etc. It means, the compiler options would have
to be all re-calculated everytime CONFIG_CROSS_COMPILE is changed.
To avoid complexity and performance issues, I'd like to evaluate
the shell commands statically, i.e. only parsing Kconfig files.
I guess the majority is [1] or [2]. Currently, there are only
5 defconfig files that specify CONFIG_CROSS_COMPILE.
arch/arm/configs/lpc18xx_defconfig
arch/hexagon/configs/comet_defconfig
arch/nds32/configs/defconfig
arch/openrisc/configs/or1ksim_defconfig
arch/openrisc/configs/simple_smp_defconfig
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
The kbuild cache was introduced to remember the result of shell
commands, some of which are expensive to compute, such as
$(call cc-option,...).
However, this turned out not so clever as I had first expected.
Actually, it is problematic. For example, "$(CC) -print-file-name"
is cached. If the compiler is updated, the stale search path causes
build error, which is difficult to figure out. Another problem
scenario is cache files could be touched while install targets are
running under the root permission. We can patch them if desired,
but the build infrastructure is getting uglier and uglier.
Now, we are going to move compiler flag tests to the configuration
phase. If this is completed, the result of compiler tests will be
naturally cached in the .config file. We will not have performance
issues of incremental building since this testing only happens at
Kconfig time.
To start this work with a cleaner code base, remove the kbuild
cache first.
Revert the following commits:
Commit 9a234a2e38 ("kbuild: create directory for make cache only when necessary")
Commit e17c400ae1 ("kbuild: shrink .cache.mk when it exceeds 1000 lines")
Commit 4e56207130 ("kbuild: Cache a few more calls to the compiler")
Commit 3298b690b2 ("kbuild: Add a cache for generated variables")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
- enable -fno-tree-loop-im only when supported
- add -fno-PIE option before the asm-goto test
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r3P/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- enable '-fno-tree-loop-im' only when supported
- add '-fno-PIE' option before the asm-goto test
* tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Makefile: disable PIE before testing asm goto
kbuild: gcov: enable -fno-tree-loop-im if supported
Modules do not tend to cope with -ffunction-sections, even though they
do not link with -gc-sections. It may be possible for unused symbols to
be trimmed from modules, but in general that would take much more work
in architecture module linker scripts.
For now, enable these only for kernel build.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Linus Torvalds
Alexey Gladkov
Masahiro Yamada
David S. Miller
Kees Cook
Miroslav Benes
Andrii Nakryiko
Rolf Eike Beer
Matthias Kaehlcke
Douglas Anderson
Luc Van Oostenryck
Nick Desaulniers
Vladimir Kondratiev
Greg Kroah-Hartman
Ingo Molnar
Rob Herring
Joel Stanley
Nadav Amit
Stefan Agner
Paulo Zanoni
Anders Roxell
Stephen Rothwell
Andy Lutomirski
Vasily Gorbik
Laura Abbott
Ulf Magnusson
Alexei Starovoitov
Nicholas Piggin