Граф коммитов

11 Коммитов

Автор SHA1 Сообщение Дата
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Stefano Panella 3af373021f uwb: remove beacon cache entry after calling uwb_notify()
Removing the beacon cache entry from a uwb_dev can cause an oops if the
bce is released before the call to uwb_notify().

Signed-off-by: Stefano Panella <stefano.panella@csr.com>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-12-23 12:31:09 +00:00
David Vrabel bce83697c5 uwb: use dev_dbg() for debug messages
Instead of the home-grown d_fnstart(), d_fnend() and d_printf() macros,
use dev_dbg() or remove the message entirely.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-12-22 18:22:50 +00:00
David Vrabel 0996e63824 uwb: remove unused beacon group join/leave events
The UWB_NOTIF_BG_JOIN/UWB_NOTIF_BG_LEAVE events have been
superceeded by the channel_changed callback in struct uwb_pal.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-11-19 14:47:16 +00:00
David Vrabel 6fae35f9ce uwb: add basic radio manager
The UWB radio manager coordinates the use of the radio between the
PALs that may be using it.  PALs request use of the radio with
uwb_radio_start() and the radio manager will start beaconing if its
not already doing so.  When the last PAL has called uwb_radio_stop()
beaconing will be stopped.

In the future, the radio manager will have a more sophisticated channel
selection algorithm, probably following the Channel Selection Policy
from the WiMedia Alliance when it is finalized.  For now, channel 9
(BG1, TFC1) is selected.

The user may override the channel selected by the radio manager and may
force the radio to stop beaconing.

The WUSB Host Controller PAL makes use of this and there are two new
debug PAL commands that can be used for testing.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-11-19 14:46:33 +00:00
Stefano Panella fec1a5932f uwb: per-radio controller event thread and beacon cache
Use an event thread per-radio controller so processing events from one
radio controller doesn't delay another.

A radio controller shouldn't have information on devices seen by a
different radio controller (they may be on different channels) so make the
beacon cache per-radio controller.

Signed-off-by: Stefano Panella <stefano.panella@csr.com>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-11-04 15:55:26 +00:00
David Vrabel 1cde7f68ce uwb: order IEs by element ID
ECMA-368 requires that IEs in a beacon must be sorted by element ID.  Most
hardware uses the ordering in the Set IE URC command so get the ordering
right on the host.

Also refactor the IE management code:
  - use uwb_ie_next() instead of uwb_ie_for_each().
  - remove unnecessary functions.
  - API is now only uwb_rc_ie_add() and uwb_rc_ie_rm().

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-28 12:09:17 +00:00
Frank Leipold c15895ef30 uwb: wrong sizeof argument in mac address compare
In the __uwb_beca_find_bymac function the sizeof returns
the length of a pointer and not the data it is referring
to. Hence only the first 4 bytes were compared, not the
entire 6 bytes MAC address. Now the sizeof takes struct
uwb_mac_addr as argument.

Signed-off-by: Frank Leipold <frank.leipold@eads.net>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-20 14:37:53 +01:00
David Vrabel 8092d7c978 uwb: don't use printk_ratelimit() so often
Avoid using printk_ratelimit() in many places because:
  - many were error messages reporting broken hardware (it's useful to
    get all of these).
  - the message itself wasn't useful so the message has been removed.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-16 13:56:53 +01:00
David Vrabel 45c16cd928 uwb: use time_after() when purging stale beacons
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-15 14:41:56 +01:00
Inaky Perez-Gonzalez 22d203ecef uwb: add the UWB stack (MLME)
Most of the MAC Layer Management Entity (MLME) support: address, beacon, IE
and scan management.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:24 +01:00