In hid_magicmouse, if the user has set scroll_speed to a value between
55 and 63 and scrolls seven times in quick succession, the
step_hr variable in the magicmouse_emit_touch function becomes 0.
That causes a division by zero further down in the function when
it does `step_x_hr /= step_hr`.
To reproduce, create `/etc/modprobe.d/hid_magicmouse.conf` with the
following content:
```
options hid_magicmouse scroll_acceleration=1 scroll_speed=55
```
Then reboot, connect a Magic Mouse and scroll seven times quickly.
The system will freeze for a minute, and after that `dmesg` will
confirm that a division by zero occurred.
Enforce a minimum of 1 for the variable so the high resolution
step count can never reach 0 even at maximum scroll acceleration.
Fixes: d4b9f10a0e ("HID: magicmouse: enable high-resolution scroll")
Signed-off-by: Claudia Pellegrino <linux@cpellegrino.de>
Tested-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Changed 0 to NULL to fix following sparse warnings:
drivers/hid/hid-thrustmaster.c:208:43: warning: Using plain integer as NULL pointer
drivers/hid/hid-thrustmaster.c:241:17: warning: Using plain integer as NULL pointer
drivers/hid/hid-thrustmaster.c:275:37: warning: Using plain integer as NULL pointer
Signed-off-by: Vihas Mak <makvihas@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Battery status is reported for the HP Envy X360 Convertible 15-eu0xxx
even if it does not have a battery. Prevent it from always reporting the
battery as low.
Signed-off-by: Trevor Davenport <trevor.davenport@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When a scancode is manually remapped that previously was not handled as
key, then the old usage type was incorrectly reused.
This caused issues on a "04b3:301b IBM Corp. SK-8815 Keyboard" which has
marked some of its keys with an invalid HID usage. These invalid usage
keys are being ignored since support for USB programmable buttons was
added.
The scancodes are however remapped explicitly by the systemd hwdb to the
keycodes that are printed on the physical buttons. During this mapping
step the existing usage is retrieved which will be found with a default
type of 0 (EV_SYN) instead of EV_KEY.
The events with the correct code but EV_SYN type are not forwarded to
userspace.
This also leads to a kernel oops when trying to print the report descriptor
via debugfs. hid_resolv_event() tries to resolve a EV_SYN event with an
EV_KEY code which leads to an out-of-bounds access in the EV_SYN names
array.
Fixes: bcfa8d1457 ("HID: input: Add support for Programmable Buttons")
Fixes: f5854fad39 ("Input: hid-input - allow mapping unknown usages")
Reported-by: Brent Roman <brent@mbari.org>
Tested-by: Brent Roman <brent@mbari.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix parsing of HID_CP_CONSUMER_CONTROL fields which are not in
the HID_CP_PROGRAMMABLEBUTTONS collection.
Fixes: bcfa8d1457 ("HID: input: Add support for Programmable Buttons")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2018096
Cc: Thomas Weißschuh <linux@weissschuh.net>
Suggested-by: Benjamin Tissoires <btissoir@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-By: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 2ea5999d07.
As Dmitry Torokhov pointed out, the previous code (KEY_DISPLAY_OFF) is
actually correct. The real issue is that current desktop environments
don't deal it properly. Mapping it to another event does not solve the
issue.
So I'm reverting that change, keeping key 0x35 mapped to KEY_DISPLAY_OFF
Signed-off-by: Vinícius Angiolucci Reis <angiolucci@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A late addititon to the intel-ish-hid framework caused a build failure
with clang, and introduced an ABI to the module loader that stops working
if any driver ever needs to bind to more than one UUID:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:1067:4: error: initializer element is not a compile-time constant
Change the ishtp_device_id to have correct documentation and a driver_data
field like all the other ones, and change the drivers to use the ID table
as the primary identification in a way that works with all compilers
and avoids duplciating the identifiers.
Fixes: f155dfeaa4 ("platform/x86: isthp_eclite: only load for matching devices")
Fixes: facfe0a4fd ("platform/chrome: chros_ec_ishtp: only load for matching devices")
Fixes: 0d0cccc0fd ("HID: intel-ish-hid: hid-client: only load for matching devices")
Fixes: 44e2a58cb8 ("HID: intel-ish-hid: fw-loader: only load for matching devices")
Fixes: cb1a2c6847 ("HID: intel-ish-hid: use constants for modaliases")
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[jkosina@suse.cz: fix ecl_ishtp_cl_driver.id initialization]
[jkosina@suse.cz: fix conflict with already fixed kerneldoc]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The kdocs were copied from another device_id struct and not adapted.
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The HID descriptor of many of Wacom's touch input devices include a
"Confidence" usage that signals if a particular touch collection contains
useful data. The driver does not look at this flag, however, which causes
even invalid contacts to be reported to userspace. A lucky combination of
kernel event filtering and device behavior (specifically: contact ID 0 ==
invalid, contact ID >0 == valid; and order all data so that all valid
contacts are reported before any invalid contacts) spare most devices from
any visibly-bad behavior.
The DTH-2452 is one example of an unlucky device that misbehaves. It uses
ID 0 for both the first valid contact and all invalid contacts. Because
we report both the valid and invalid contacts, the kernel reports that
contact 0 first goes down (valid) and then goes up (invalid) in every
report. This causes ~100 clicks per second simply by touching the screen.
This patch inroduces new `confidence` flag in our `hid_data` structure.
The value is initially set to `true` at the start of a report and can be
set to `false` if an invalid touch usage is seen.
Link: https://github.com/linuxwacom/input-wacom/issues/270
Fixes: f8b6a74719 ("HID: wacom: generic: Support multiple tools per report")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These two error paths need to drop the lock before returning.
Fixes: c5e6267695 ("HID: nintendo: add player led support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This allows to selectively autoload drivers for ISH devices.
Currently all ISH drivers are loaded for all systems having any ISH
device.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- support for Nintendo Switch Pro Controllers and Joy-Cons (Daniel J.
Ogorchock)
- support for new revision of the NitroKey U2F device firmware (Andrej
Shadura)
- LED handling improvements for Sony Playstation5 controllers (Roderick
Colenbrander)
- support for Apple 2021 Magic Keyboard (Alex Henrie)
- other assorted code cleanups and new device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (41 commits)
HID: nintendo: fix -Werror build
HID: playstation: require multicolor LED functionality
HID: u2fzero: properly handle timeouts in usb_submit_urb
HID: u2fzero: clarify error check and length calculations
HID: u2fzero: Support NitroKey U2F revision of the device
HID: wacom: Make use of the helper function devm_add_action_or_reset()
HID: wacom: Shrink critical section in `wacom_add_shared_data`
HID: nintendo: prevent needless queueing of the rumble worker
HID: nintendo: ratelimit subcommands and rumble
HID: nintendo: improve rumble performance and stability
HID: nintendo: add IMU support
HID: nintendo: add support for reading user calibration
HID: nintendo: add support for charging grip
HID: nintendo: set controller uniq to MAC
HID: nintendo: reduce device removal subcommand errors
HID: nintendo: patch hw version for userspace HID mappings
HID: nintendo: send subcommands after receiving input report
HID: nintendo: improve subcommand reliability
HID: nintendo: add rumble support
HID: nintendo: add home led support
...
Core changes:
- Add infrastructure for per-parent interrupt data to support
the Apple pin controller.
New drivers:
- New combined pin control and GPIO driver for the Apple SoC.
This is used in all modern Apple silicon such as the M1
laptops but also in at least recent iPhone variants.
- New subdriver for the Qualcomm SM6350
- New subdriver for the Qualcomm QCM2290
- New subdriver for the Qualcomm PM6350
- New subdriver for the Uniphier NX1
- New subdriver for the Samsung ExynosAutoV9
- New subdriver for the Mediatek MT7986
- New subdriver for the nVidia Tegra194
Improvements:
- Improve power management in the Mediatek driver.
- Improvements to the Renesas internal consistency checker.
- Convert the Rockchip pin control device tree bindings to YAML.
- Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO
driver to use hierarchical interrupts.
- Convert the Qualcomm PMIC MPP device tree bindings to YAML.
-----BEGIN PGP SIGNATURE-----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=4Ms6
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The most interesting aspect is that we now have initial support for
the Apple pin controller as used in the M1 laptops and the iPhones
which is a step forward for using Linux efficiently on this Apple
silicon.
Core changes:
- Add infrastructure for per-parent interrupt data to support the
Apple pin controller.
New drivers:
- New combined pin control and GPIO driver for the Apple SoC. This is
used in all modern Apple silicon such as the M1 laptops but also in
at least recent iPhone variants.
- New subdriver for the Qualcomm SM6350
- New subdriver for the Qualcomm QCM2290
- New subdriver for the Qualcomm PM6350
- New subdriver for the Uniphier NX1
- New subdriver for the Samsung ExynosAutoV9
- New subdriver for the Mediatek MT7986
- New subdriver for the nVidia Tegra194
Improvements:
- Improve power management in the Mediatek driver.
- Improvements to the Renesas internal consistency checker.
- Convert the Rockchip pin control device tree bindings to YAML.
- Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO driver to
use hierarchical interrupts.
- Convert the Qualcomm PMIC MPP device tree bindings to YAML"
* tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (55 commits)
pinctrl: add pinctrl/GPIO driver for Apple SoCs
dt-bindings: pinctrl: Add apple,npins property to apple,pinctrl
dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrl
gpio: Allow per-parent interrupt data
pinctrl: tegra: Fix warnings and error
pinctrl: intel: Kconfig: Add configuration menu to Intel pin control
pinctrl: tegra: Use correct offset for pin group
pinctrl: core: fix possible memory leak in pinctrl_enable()
pinctrl: bcm2835: Allow building driver as a module
pinctrl: equilibrium: Fix function addition in multiple groups
pinctrl: tegra: Add pinmux support for Tegra194
pinctrl: tegra: include lpdr pin properties
pinctrl: mediatek: add support for MT7986 SoC
dt-bindings: pinctrl: update bindings for MT7986 SoC
pinctrl: microchip sgpio: use reset driver
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding
dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells
pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chip
pinctrl: qcom: spmi-mpp: hardcode IRQ counts
pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chip
...
- Remove unused properties
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYYU5qwAKCRDKSWXLKUoM
IUiHAKCQuBMTBAz65pTwi/zfCVQ5fVgGIwCfdw6bO/WIS3XLdjR6X3o+raT/K4A=
=9Ix3
-----END PGP SIGNATURE-----
Merge tag 'microblaze-v5.16' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze update from Michal Simek:
"Remove unused devicetree properties. Sean is pushing one pwm driver
and these ancient properties are going against agreed DT binding"
* tag 'microblaze-v5.16' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: timer: Remove unused properties
- Enable STRICT_KERNEL_RWX for Freescale 85xx platforms.
- Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it to be disabled.
- Add support for out-of-line static calls on 32-bit.
- Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled.
- Fix boot hangs on e5500 due to stale value in ESR passed to do_page_fault().
- Fix several bugs on pseries in handling of device tree cache information for hotplugged
CPUs, and/or during partition migration.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin, Andrew Donnellan,
Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le Goater, Christophe Leroy, Daniel
Axtens, Daniel Henrique Barboza, Denis Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo
A. R. Silva, Hari Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent
Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Naveen N.
Rao, Nicholas Piggin, Nick Desaulniers, Niklas Schnelle, Oliver O'Halloran, Rob Herring,
Russell Currey, Srikar Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant
Hegde, Wan Jiabing, Xiaoming Ni,
-----BEGIN PGP SIGNATURE-----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=f7HE
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable STRICT_KERNEL_RWX for Freescale 85xx platforms.
- Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it
to be disabled.
- Add support for out-of-line static calls on 32-bit.
- Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled.
- Fix boot hangs on e5500 due to stale value in ESR passed to
do_page_fault().
- Fix several bugs on pseries in handling of device tree cache
information for hotplugged CPUs, and/or during partition migration.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin,
Andrew Donnellan, Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le
Goater, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Denis
Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo A. R. Silva, Hari
Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent
Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Niklas
Schnelle, Oliver O'Halloran, Rob Herring, Russell Currey, Srikar
Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant
Hegde, Wan Jiabing, and Xiaoming Ni,
* tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (73 commits)
powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST
powerpc/32e: Ignore ESR in instruction storage interrupt handler
powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload
powerpc: Don't provide __kernel_map_pages() without ARCH_SUPPORTS_DEBUG_PAGEALLOC
MAINTAINERS: Update powerpc KVM entry
powerpc/xmon: fix task state output
powerpc/44x/fsp2: add missing of_node_put
powerpc/dcr: Use cmplwi instead of 3-argument cmpli
KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handling
powerpc/security: Use a mutex for interrupt exit code patching
powerpc/83xx/mpc8349emitx: Make mcu_gpiochip_remove() return void
powerpc/fsl_booke: Fix setting of exec flag when setting TLBCAMs
powerpc/book3e: Fix set_memory_x() and set_memory_nx()
powerpc/nohash: Fix __ptep_set_access_flags() and ptep_set_wrprotect()
powerpc/bpf: Fix write protecting JIT code
selftests/powerpc: Use date instead of EPOCHSECONDS in mitigation-patching.sh
powerpc/64s/interrupt: Fix check_return_regs_valid() false positive
powerpc/boot: Set LC_ALL=C in wrapper script
powerpc/64s: Default to 64K pages for 64 bit book3s
Revert "powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC"
...
- removed support for Netlogic SOCs
- fixes and cleanup
-----BEGIN PGP SIGNATURE-----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=mvn0
-----END PGP SIGNATURE-----
Merge tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added printing of CPU options for /proc/cpuinfo
- removed support for Netlogic SOCs
- fixes and cleanup
* tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Cobalt: Explain GT64111 early PCI fixup
mips: fix HUGETLB function without THP enabled
mips: cm: Convert to bitfield API to fix out-of-bounds access
MIPS: Remove NETLOGIC support
MIPS: kernel: proc: add CPU option reporting
MIPS: kernel: proc: use seq_puts instead of seq_printf
MIPS: kernel: proc: fix trivial style errors
MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVEL
MIPS: octeon: Remove unused functions
MIPS: Loongson64: Add of_node_put() before break
bcm47xx: Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert()
bcm47xx: Get rid of redundant 'else'
MIPS: sni: Fix the build
MIPS: Avoid macro redefinitions
MIPS: loongson64: Fix no screen display during boot-up
MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT
Miscellaneous small fixes and improvements all over
the place. Nothing stands out in particular.
-----BEGIN PGP SIGNATURE-----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=MnnT
-----END PGP SIGNATURE-----
Merge tag 'for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Miscellaneous small fixes and improvements all over the place.
Nothing stands out in particular"
* tag 'for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: bq25890: Fix initial setting of the F_CONV_RATE field
power: supply: bq25890: Fix race causing oops at boot
power: supply: bq27xxx: Fix kernel crash on IRQ handler register error
power: bq25890: add return values to error messages
power: supply: axp288-charger: Simplify axp288_get_charger_health()
power: supply: axp288-charger: Remove unnecessary is_present and is_online helpers
power: supply: axp288-charger: Add depends on IOSF_MBIO to Kconfig
power: supply: ab8500_bmdata: Use standard phandle
dt-bindings: power: supply: ab8500: Standard monitored-battery
power: supply: axp288_charger: Fix missing mutex_init()
power: supply: max17042_battery: Prevent int underflow in set_soc_threshold
power: supply: max17042_battery: Clear status bits in interrupt handler
MAINTAINERS: power: supply: max17040: add entry with reviewers
MAINTAINERS: power: supply: max17042: add entry with reviewers
power: supply: max17040: fix null-ptr-deref in max17040_probe()
power: supply: rt5033_battery: Change voltage values to µV
power: supply: axp288-charger: Optimize register reading method
dt-bindings: power: Bindings for Samsung batteries
power: supply: cpcap-battery: use device_get_match_data() to simplify code
power: supply: max17042_battery: fix typo in MAX17042_IAvg_empty
...
One build error fix and two optimizations:
- Fix build error by moving the CPU field back into thread_info struct
(Ard Biesheuvel)
- Do not enable IRQs unconditionally at start of interrupt handler if
they were disabled before (Sven Schnelle)
- Keep interrupts enabled during cmpxchg and futex operations (Dave Anglin)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYYQQmwAKCRD3ErUQojoP
X/0yAP9407DGmvW507Lt+WIw9DaC4KNK/PS9qhGEm1VZltOGrgEAm51CwzxMoEsi
877jmPOKjUKOVXEkFnWy9GikhMlBNAI=
=pekB
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc architecture fixes and updates from Helge Deller:
"One build error fix and two optimizations:
- Fix build error by moving the CPU field back into thread_info
struct (Ard Biesheuvel)
- Do not enable IRQs unconditionally at start of interrupt handler if
they were disabled before (Sven Schnelle)
- Keep interrupts enabled during cmpxchg and futex operations (Dave
Anglin)"
* tag 'for-5.16/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: move CPU field back into thread_info
parisc: Don't disable interrupts in cmpxchg and futex operations
parisc: don't enable irqs unconditionally in handle_interruption()
Including:
- Intel IOMMU Updates fro Lu Baolu:
- Dump DMAR translation structure when DMA fault occurs
- An optimization in the page table manipulation code
- Use second level for GPA->HPA translation
- Various cleanups
- Arm SMMU Updates from Will
- Minor optimisations to SMMUv3 command creation and submission
- Numerous new compatible string for Qualcomm SMMUv2 implementations
- Fixes for the SWIOTLB based implemenation of dma-iommu code for
untrusted devices
- Add support for r8a779a0 to the Renesas IOMMU driver and DT matching
code for r8a77980
- A couple of cleanups and fixes for the Apple DART IOMMU driver
- Make use of generic report_iommu_fault() interface in the AMD IOMMU
driver
- Various smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=waUR
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel IOMMU Updates fro Lu Baolu:
- Dump DMAR translation structure when DMA fault occurs
- An optimization in the page table manipulation code
- Use second level for GPA->HPA translation
- Various cleanups
- Arm SMMU Updates from Will
- Minor optimisations to SMMUv3 command creation and submission
- Numerous new compatible string for Qualcomm SMMUv2 implementations
- Fixes for the SWIOTLB based implemenation of dma-iommu code for
untrusted devices
- Add support for r8a779a0 to the Renesas IOMMU driver and DT matching
code for r8a77980
- A couple of cleanups and fixes for the Apple DART IOMMU driver
- Make use of generic report_iommu_fault() interface in the AMD IOMMU
driver
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (35 commits)
iommu/dma: Fix incorrect error return on iommu deferred attach
iommu/dart: Initialize DART_STREAMS_ENABLE
iommu/dma: Use kvcalloc() instead of kvzalloc()
iommu/tegra-smmu: Use devm_bitmap_zalloc when applicable
iommu/dart: Use kmemdup instead of kzalloc and memcpy
iommu/vt-d: Avoid duplicate removing in __domain_mapping()
iommu/vt-d: Convert the return type of first_pte_in_page to bool
iommu/vt-d: Clean up unused PASID updating functions
iommu/vt-d: Delete dev_has_feat callback
iommu/vt-d: Use second level for GPA->HPA translation
iommu/vt-d: Check FL and SL capability sanity in scalable mode
iommu/vt-d: Remove duplicate identity domain flag
iommu/vt-d: Dump DMAR translation structure when DMA fault occurs
iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option
iommu/arm-smmu-qcom: Request direct mapping for modem device
iommu: arm-smmu-qcom: Add compatible for QCM2290
dt-bindings: arm-smmu: Add compatible for QCM2290 SoC
iommu/arm-smmu-qcom: Add SM6350 SMMU compatible
dt-bindings: arm-smmu: Add compatible for SM6350 SoC
iommu/arm-smmu-v3: Properly handle the return value of arm_smmu_cmdq_build_cmd()
...
Here is the big set of tty and serial driver updates for 5.16-rc1.
Nothing major in here at all, just lots of tiny serial and tty driver
updates for various reported things, and some good cleanups. These
include:
- more good tty api cleanups from Jiri
- stm32 serial driver updates
- softlockup fix for non-preempt systems under high serial load
- rpmsg serial driver update
- 8250 drivers updates and fixes
- n_gsm line discipline fixes and updates as people are finally
starting to use it.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPczQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykWbwCfaIScbUoCUx+h/uP93nKKD8B3KgYAoMvFuhhD
D/fTLggs12x5NsvLBgtZ
=rq0R
-----END PGP SIGNATURE-----
Merge tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.16-rc1.
Nothing major in here at all, just lots of tiny serial and tty driver
updates for various reported things, and some good cleanups. These
include:
- more good tty api cleanups from Jiri
- stm32 serial driver updates
- softlockup fix for non-preempt systems under high serial load
- rpmsg serial driver update
- 8250 drivers updates and fixes
- n_gsm line discipline fixes and updates as people are finally
starting to use it.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits)
tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description
serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE
tty: rpmsg: Define tty name via constant string literal
tty: rpmsg: Add pr_fmt() to prefix messages
tty: rpmsg: Use dev_err_probe() in ->probe()
tty: rpmsg: Unify variable used to keep an error code
tty: rpmsg: Assign returned id to a local variable
serial: stm32: push DMA RX data before suspending
serial: stm32: terminate / restart DMA transfer at suspend / resume
serial: stm32: rework RX dma initialization and release
serial: 8250_pci: Remove empty stub pci_quatech_exit()
serial: 8250_pci: Replace custom pci_match_id() implementation
serial: xilinx_uartps: Fix race condition causing stuck TX
serial: sunzilog: Mark sunzilog_putchar() __maybe_unused
Revert "tty: hvc: pass DMA capable memory to put_chars()"
Revert "virtio-console: remove unnecessary kmemdup()"
serial: 8250_pci: Replace dev_*() by pci_*() macros
serial: 8250_pci: Get rid of redundant 'else' keyword
serial: 8250_pci: Refactor the loop in pci_ite887x_init()
tty: add rpmsg driver
...
Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files
and scripts from Mauro. We are almost at the place where we
can properly check that the running kernel's sysfs abi is
documented fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPbjQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ync9gCfXKMUI1GAnCfJWAwTdTcd18q5akoAoMw32/AH
0yh5TjAWFyFd7xz5d7qs
=itsC
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files and
scripts from Mauro. We are almost at the place where we can
properly check that the running kernel's sysfs abi is documented
fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes"
* tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits)
device property: Drop redundant NULL checks
x86/build: Tuck away built-in firmware under FW_LOADER
vmlinux.lds.h: wrap built-in firmware support under FW_LOADER
firmware_loader: move struct builtin_fw to the only place used
x86/microcode: Use the firmware_loader built-in API
firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE()
firmware_loader: formalize built-in firmware API
component: do not leave master devres group open after bind
dyndbg: refine verbosity 1-4 summary-detail
gpiolib: acpi: Replace custom code with device_match_acpi_handle()
i2c: acpi: Replace custom function with device_match_acpi_handle()
driver core: Provide device_match_acpi_handle() helper
dyndbg: fix spurious vNpr_info change
dyndbg: no vpr-info on empty queries
dyndbg: vpr-info on remove-module complete, not starting
device property: Add missed header in fwnode.h
Documentation: dyndbg: Improve cli param examples
dyndbg: Remove support for ddebug_query param
dyndbg: make dyndbg a known cli param
dyndbg: show module in vpr-info in dd-exec-queries
...
Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage,
reviewed and acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by
the hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in
arm64 for allmodconfig, but that change is on its way through
the drm tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPX2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUUgCbB4EKysgLuXYdjUalZDx+vvZO4k0AniS14O4k
F+2dVSZ5WX6wumUzCaA6
=bXQM
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
Here is the big set of staging driver updates and cleanups for 5.16-rc1.
Overall we ended up removing a lot of code this time, a bit over 20,000
lines are now gone thanks to a lot of cleanup work by many developers.
Nothing huge in here functionality wise, just loads of cleanups:
- r8188eu driver major cleanups and removal of unused and dead
code
- wlan-ng minor cleanups
- fbtft driver cleanups
- most driver cleanups
- rtl8* drivers cleanups
- rts5208 driver cleanups
- vt6655 driver cleanups
- vc04_services drivers cleanups
- wfx cleanups on the way to almost getting this merged out of
staging (it's close!)
- tiny mips changes needed for the mt7621 drivers, they have
been acked by the respective subsystem maintainers to go
through this tree.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPZQQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yml9wCeJl83anYno0xh+UP6CsEkbe64VJEAoIEKyry/
tlUowcatxGfz3aYA1wTc
=FyAK
-----END PGP SIGNATURE-----
Merge tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates and cleanups for
5.16-rc1.
Overall we ended up removing a lot of code this time, a bit over
20,000 lines are now gone thanks to a lot of cleanup work by many
developers.
Nothing huge in here functionality wise, just loads of cleanups:
- r8188eu driver major cleanups and removal of unused and dead code
- wlan-ng minor cleanups
- fbtft driver cleanups
- most driver cleanups
- rtl8* drivers cleanups
- rts5208 driver cleanups
- vt6655 driver cleanups
- vc04_services drivers cleanups
- wfx cleanups on the way to almost getting this merged out of
staging (it's close!)
- tiny mips changes needed for the mt7621 drivers, they have been
acked by the respective subsystem maintainers to go through this
tree.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (622 commits)
staging: r8188eu: hal: remove goto statement and local variable
staging: rtl8723bs: hal remove the assignment to itself
staging: rtl8723bs: fix unmet dependency on CRYPTO for CRYPTO_LIB_ARC4
staging: vchiq_core: get rid of typedef
staging: fieldbus: anybus: reframe comment to avoid warning
staging: r8188eu: fix missing unlock in rtw_resume()
staging: r8188eu: core: remove the goto from rtw_IOL_accquire_xmit_frame
staging: r8188eu: core: remove goto statement
staging: vt6655: Rename `dwAL7230InitTable` array
staging: vt6655: Rename `dwAL2230PowerTable` array
staging: vt6655: Rename `dwAL7230InitTableAMode` array
staging: vt6655: Rename `dwAL7230ChannelTable2` array
staging: vt6655: Rename `dwAL7230ChannelTable1` array
staging: vt6655: Rename `dwAL7230ChannelTable0` array
staging: vt6655: Rename `dwAL2230ChannelTable1` array
staging: vt6655: Rename `dwAL2230ChannelTable0` array
staging: r8712u: fix control-message timeout
staging: rtl8192u: fix control-message timeouts
staging: mt7621-dts: add missing SPDX license to files
staging: vchiq_core: fix quoted strings split across lines
...
Here is the big set of USB and Thunderbolt driver updates for 5.16-rc1.
Nothing major in here, just lots of little cleanups and additions for
new hardware, all of which have been in linux-next for a while with no
reported problems.
Included in here are:
- tiny Thunderbolt driver updates
- USB typec driver updates
- USB serial driver updates
- USB gadget driver updates
- dwc2 and dwc3 controller driver updates
- tiny USB host driver updates
- minor USB driver fixes and updates
- USB dts updates for various platforms
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPaPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylH3wCghhRCsLl5axOKdbkJO2ZUApR71DwAn2Vjwo2Y
Jgo6v3bVWWhL43YwCkf6
=UNgI
-----END PGP SIGNATURE-----
Merge tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
5.16-rc1.
Nothing major in here, just lots of little cleanups and additions for
new hardware, all of which have been in linux-next for a while with no
reported problems.
Included in here are:
- tiny Thunderbolt driver updates
- USB typec driver updates
- USB serial driver updates
- USB gadget driver updates
- dwc2 and dwc3 controller driver updates
- tiny USB host driver updates
- minor USB driver fixes and updates
- USB dts updates for various platforms"
* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: gadget: Mark USB_FSL_QE broken on 64-bit
usb: gadget: f_mass_storage: Disable eps during disconnect
usb: gadget: udc: core: Revise comments for USB ep enable/disable
USB: serial: keyspan: fix memleak on probe errors
USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send()
USB: serial: ch314: use usb_control_msg_recv()
USB: iowarrior: fix control-message timeouts
Documentation: USB: fix example bulk-message timeout
usb: dwc2: stm32mp15: set otg_rev
usb: dwc2: add otg_rev and otg_caps information for gadget driver
dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml
dt-bindings: usb: dwc2: Add reference to usb-drd.yaml
usb: gadget: uvc: implement dwPresentationTime and scrSourceClock
usb: gadget: uvc: use on returned header len in video_encode_isoc_sg
usb:gadget: f_uac1: fixed sync playback
Docs: usb: remove :c:func: for usb_register and usb_deregister
Docs: usb: update struct usb_driver
usb: gadget: configfs: change config attributes file operation
usb: gadget: configfs: add cfg_to_gadget_info() helper
usb: dwc3: Align DWC3_EP_* flag macros
...
In commit 2214c0e772 ("parisc: Move thread_info into task struct")
PA-RISC gained support for THREAD_INFO_IN_TASK while changes were
already underway to keep the CPU field in thread_info rather than move
it into task_struct when THREAD_INFO_IN_TASK is enabled. The result is a
broken build for all PA-RISC configs that enable SMP.
So let's partially revert that commit, and get rid of the ugly hack to
get at the offset of task_struct::cpu without having to include
linux/sched.h, and put the CPU field back where it was before.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: bcf9033e54 ("sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
I no longer think interrupts can be disabled in the futex and cmpxchg
operations because of COW breaks. This not ideal but I suspect it's the
best we can do.
For the cmpxchg operations in syscall.S, we rely on the code to not
schedule off the gateway page. For the futex, I added code to disable
preemption.
So far, I haven't seen the warnings with the attached change but the
change is only lightly tested.
Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
If the previous context had interrupts disabled, we should better
keep them disabled. This was noticed in the unwinding code where
a copy_from_kernel_nofault() triggered a page fault, and after
the fixup by the page fault handler interrupts where suddenly
enabled.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
terms of lines it's mainly Qualcomm and Mediatek code, supporting
various SoCs and their multitude of clk controllers.
New Drivers:
- GCC and RPMcc support for Qualcomm QCM2290 SoCs
- GCC support for Qualcomm MSM8994/MSM8992 SoCs
- LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
- Support for Mediatek MT8195 SoCs
- Initial clock driver for the Exynos850 SoC
- Add i.MX8ULP clock driver and related bindings
Updates:
- Clock power management for new SAMA7G5 SoC
- Updates to the master clock driver and sam9x60-pll to be able to use
cpufreq-dt driver and avoid overclocking of CPU and MCK0 domains while
changing the frequency via DVFS
- Use ARRAY_SIZE in qcom clk drivers
- Remove some impractical fallback parent names in qcom clk drivers
- Make Mediatek clk drivers tristate
- Refactoring of the CPU clock code and conversion of Samsung Exynos5433
CPU clock driver to the platform driver
- A few conversions to devm_platform_ioremap_resource()
- Updates of the Samsung Kconfig help text
- Update video path realted clocks for Amlogic meson8
- Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L
- Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U
- Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N
- Remove unused helpers from i.MX specific clock header
- Rework all i.MX clk based helpers to use clk_hw based ones
- Rework i.MX gate/mux/divider wrappers
- Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
- Update i.MX pllv4 and composite clocks to support i.MX8ULP
- Disable i.MX7ULP composite clock during initialization
- Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
- Disable the i.MX pfd when set pfdv2 clock rate
- Add support for i.MX8ULP in pfdv2
- Add the pcc reset controller support on i.MX8ULP
- Fix the build break when clk-imx8ulp is built as module
- Move csi_sel mux to correct base register in i.MX6UL clock drivr
- Fix csi clk gate register in i.MX6UL clock driver
- Fix build bug making CLK_IMX8ULP select MXC_CLK
- Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U
- Add Ethernet clocks on Renesas RZ/G2L
- Move Rockchip to use module_platform_probe
- Enable usage of Coresight related clocks on Rockchip rk3399
-----BEGIN PGP SIGNATURE-----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=Is+O
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The usual collection of clk driver updates and new driver additions.
In terms of lines it's mainly Qualcomm and Mediatek code, supporting
various SoCs and their multitude of clk controllers.
New Drivers:
- GCC and RPMcc support for Qualcomm QCM2290 SoCs
- GCC support for Qualcomm MSM8994/MSM8992 SoCs
- LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
- Support for Mediatek MT8195 SoCs
- Initial clock driver for the Exynos850 SoC
- Add i.MX8ULP clock driver and related bindings
Updates:
- Clock power management for new SAMA7G5 SoC
- Updates to the master clock driver and sam9x60-pll to be able to
use cpufreq-dt driver and avoid overclocking of CPU and MCK0
domains while changing the frequency via DVFS
- Use ARRAY_SIZE in qcom clk drivers
- Remove some impractical fallback parent names in qcom clk drivers
- Make Mediatek clk drivers tristate
- Refactoring of the CPU clock code and conversion of Samsung
Exynos5433 CPU clock driver to the platform driver
- A few conversions to devm_platform_ioremap_resource()
- Updates of the Samsung Kconfig help text
- Update video path realted clocks for Amlogic meson8
- Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L
- Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U
- Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N
- Remove unused helpers from i.MX specific clock header
- Rework all i.MX clk based helpers to use clk_hw based ones
- Rework i.MX gate/mux/divider wrappers
- Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
- Update i.MX pllv4 and composite clocks to support i.MX8ULP
- Disable i.MX7ULP composite clock during initialization
- Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
- Disable the i.MX pfd when set pfdv2 clock rate
- Add support for i.MX8ULP in pfdv2
- Add the pcc reset controller support on i.MX8ULP
- Fix the build break when clk-imx8ulp is built as module
- Move csi_sel mux to correct base register in i.MX6UL clock drivr
- Fix csi clk gate register in i.MX6UL clock driver
- Fix build bug making CLK_IMX8ULP select MXC_CLK
- Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U
- Add Ethernet clocks on Renesas RZ/G2L
- Move Rockchip to use module_platform_probe
- Enable usage of Coresight related clocks on Rockchip rk3399"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (170 commits)
clk: use clk_core_get_rate_recalc() in clk_rate_get()
clk: at91: sama7g5: set low limit for mck0 at 32KHz
clk: at91: sama7g5: remove prescaler part of master clock
clk: at91: clk-master: add notifier for divider
clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
clk: at91: clk-master: fix prescaler logic
clk: at91: clk-master: mask mckr against layout->mask
clk: at91: clk-master: check if div or pres is zero
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
clk: at91: pmc: add sama7g5 to the list of available pmcs
clk: at91: clk-master: improve readability by using local variables
clk: at91: clk-master: add register definition for sama7g5's master clock
clk: at91: sama7g5: add securam's peripheral clock
clk: at91: pmc: execute suspend/resume only for backup mode
clk: at91: re-factor clocks suspend/resume
clk: ux500: Add driver for the reset portions of PRCC
dt-bindings: clock: u8500: Rewrite in YAML and extend
clk: composite: Use rate_ops.determine_rate when also a mux is available
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
...
These are all the driver updates for SoC specific drivers. There
are a couple of subsystems with individual maintainers picking up
their patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this
tree this time. There are only minor changes, but they depend
on other tegra driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process.
This depends on a small sound driver change that is included
here as well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains
a mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for
the "Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed
BMCs, something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better suspend/resume
support
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
allwinner, broadcom, and omap.
-----BEGIN PGP SIGNATURE-----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=tUuj
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
This is a rather large update for the ARM devicetree files, after a few
quieter releases, with 775 total commits and 47 branches pulled into
this one. There are 5 new SoC types plus some minor variations, and
a total of 60 new machines, so I'm limiting the summary to the main
noteworthy items:
- Apple M1 gain support for PCI and pinctrl, getting a bit
closer to a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as
well as SM7225, 11 new smartphones, and three additional
Chromebooks, and improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version
of their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a
number of improvements for the recently added SAMA7 family.
The LAN966 SoC that was added in the platform code does not
have dts files yet. Two board files are added for the older
at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600
as BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new
development boards using RK3328/RK3399/RK3566, and one
Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the
new MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based
ebook readers, and three additional development boards, which
is notably less than their usual additions, but they also gain
improvements to their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with
a reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many
updates for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi
boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for
more hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub
home automation controllers, along with changes to other
machines
- Rob Herring continues his work on fixing dtc warnings all over
the tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc
-----BEGIN PGP SIGNATURE-----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=jp4P
-----END PGP SIGNATURE-----
Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
The SoC updates this time are mainly removing obsolete code from the
OMAP2 platform, another step in the eternal cleanup of that platform.
There are two new SoCs getting added: STMicroelectronics stm32mp13 and
Microchip lan966. Both fit into existing platforms and require minimal
changes here.
A couple of MAINTAINER file updates relate to those changes, and
update some file paths.
-----BEGIN PGP SIGNATURE-----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=Vkfc
-----END PGP SIGNATURE-----
Merge tag 'soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The SoC updates this time are mainly removing obsolete code from the
OMAP2 platform, another step in the eternal cleanup of that platform.
There are two new SoCs getting added: STMicroelectronics stm32mp13 and
Microchip lan966. Both fit into existing platforms and require minimal
changes here.
A couple of MAINTAINER file updates relate to those changes, and
update some file paths"
* tag 'soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
MAINTAINERS: Update BCM7XXX entry with additional patterns
MAINTAINERS: add pinctrl-apple-gpio to ARM/APPLE MACHINE
MAINTAINERS: Add pasemi i2c to ARM/APPLE MACHINE
ARM: SPEAr: Update MAINTAINERS entries
ARM: OMAP2+: Drop unused CM defines for am3
ARM: OMAP2+: Drop unused CM and SCRM defines for omap4
ARM: OMAP2+: Drop unused CM and SCRM defines for omap5
ARM: OMAP2+: Drop unused CM defines for dra7
ARM: OMAP2+: Drop unused PRM defines for am3
ARM: OMAP2+: Drop unused PRM defines for am4
ARM: OMAP2+: Drop unused PRM defines for omap4
ARM: OMAP2+: Drop unused PRM defines for omap5
ARM: OMAP2+: Drop unused PRM defines for dra7
ARM: OMAP2+: Fix comment typo
ARM: OMAP2+: Fix typo in some comments
ARM: at91: add basic support for new SoC family lan966
dt-bindings: arm: at91: Document lan966 pcb8291 and pcb8290 boards
ARM: at91: Documentation: add lan966 family
ARM: at91: Documentation: add sama7g5 family
MAINTAINERS: add an entry for NXP S32G boards
...
Hardening work by Jason
vdpa driver for Alibaba ENI
Performance tweaks for virtio blk
virtio rng rework using an internal buffer
mac/mtu programming for mlx5 vdpa
Misc fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmF/su8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpo+sIAJjBTvbET+d0KuIMt8YBGsU+NWgHaJxW06hm
GHZzinueZYWaS20MPMYMPfcHUgigWj0kk7F0gMljG5rtDFzR85JkOi7+e5V6RVJW
8SQc7JjA1Krde6EiPJdlv3mVkLz/5VbrGUgjAW9di/O04Xc/jAc9kmJ41wTYr0mL
E5IsUi9QBmgHtKQ+2ofb9QEWuebJclGK+NVd3Kp08BtAQOrdn5UrIzY30/sjkZwE
ul2ll6v/k7T3dCQbHD/wMgfFycPvoZVfxaVj+FWQnwdWkqZwzMRmpKPRes4KJfww
Lfx1qox10mJzH7XJCs7xmOM8f7HgNNWi0gD5FxNlfkiz1AwHYOk=
=DTXY
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost and virtio fixes and features:
- Hardening work by Jason
- vdpa driver for Alibaba ENI
- Performance tweaks for virtio blk
- virtio rng rework using an internal buffer
- mac/mtu programming for mlx5 vdpa
- Misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (45 commits)
vdpa/mlx5: Forward only packets with allowed MAC address
vdpa/mlx5: Support configuration of MAC
vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bit
vdpa_sim_net: Enable user to set mac address and mtu
vdpa: Enable user to set mac and mtu of vdpa device
vdpa: Use kernel coding style for structure comments
vdpa: Introduce query of device config layout
vdpa: Introduce and use vdpa device get, set config helpers
virtio-scsi: don't let virtio core to validate used buffer length
virtio-blk: don't let virtio core to validate used length
virtio-net: don't let virtio core to validate used length
virtio_ring: validate used buffer length
virtio_blk: correct types for status handling
virtio_blk: allow 0 as num_request_queues
i2c: virtio: Add support for zero-length requests
virtio-blk: fixup coccinelle warnings
virtio_ring: fix typos in vring_desc_extra
virtio-pci: harden INTX interrupts
virtio_pci: harden MSI-X interrupts
virtio_config: introduce a new .enable_cbs method
...
- Cleanup vfio iommu_group creation (Christoph Hellwig)
- Add individual device reset for vfio/fsl-mc (Diana Craciun)
- IGD OpRegion 2.0+ support (Colin Xu)
- Use modern cdev lifecycle for vfio_group (Jason Gunthorpe)
- Use new mdev API in vfio_ccw (Jason Gunthorpe)
-----BEGIN PGP SIGNATURE-----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=AsTx
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.16-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Cleanup vfio iommu_group creation (Christoph Hellwig)
- Add individual device reset for vfio/fsl-mc (Diana Craciun)
- IGD OpRegion 2.0+ support (Colin Xu)
- Use modern cdev lifecycle for vfio_group (Jason Gunthorpe)
- Use new mdev API in vfio_ccw (Jason Gunthorpe)
* tag 'vfio-v5.16-rc1' of git://github.com/awilliam/linux-vfio: (27 commits)
vfio/ccw: Convert to use vfio_register_emulated_iommu_dev()
vfio/ccw: Pass vfio_ccw_private not mdev_device to various functions
vfio/ccw: Use functions for alloc/free of the vfio_ccw_private
vfio/ccw: Remove unneeded GFP_DMA
vfio: Use cdev_device_add() instead of device_create()
vfio: Use a refcount_t instead of a kref in the vfio_group
vfio: Don't leak a group reference if the group already exists
vfio: Do not open code the group list search in vfio_create_group()
vfio: Delete vfio_get/put_group from vfio_iommu_group_notifier()
vfio/pci: Add OpRegion 2.0+ Extended VBT support.
vfio/iommu_type1: remove IS_IOMMU_CAP_DOMAIN_IN_CONTAINER
vfio/iommu_type1: remove the "external" domain
vfio/iommu_type1: initialize pgsize_bitmap in ->open
vfio/spapr_tce: reject mediated devices
vfio: clean up the check for mediated device in vfio_iommu_type1
vfio: remove the unused mdev iommu hook
vfio: move the vfio_iommu_driver_ops interface out of <linux/vfio.h>
vfio: remove unused method from vfio_iommu_driver_ops
vfio: simplify iommu group allocation for mediated devices
vfio: remove the iommudata hack for noiommu groups
...
Claudia Pellegrino
Vihas Mak
Trevor Davenport
Thomas Weißschuh
Hans de Goede
Michael Zaidman
Vinícius Angiolucci Reis
Arnd Bergmann
Jason Gerecke
Dan Carpenter
Linus Torvalds
Jiri Kosina
Ard Biesheuvel
Dave Anglin
Sven Schnelle