Граф коммитов

28 Коммитов

Автор SHA1 Сообщение Дата
Oskar Schirmer c3dc5bec05 flat: fix data sections alignment
The flat loader uses an architecture's flat_stack_align() to align the
stack but assumes word-alignment is enough for the data sections.

However, on the Xtensa S6000 we have registers up to 128bit width
which can be used from userspace and therefor need userspace stack and
data-section alignment of at least this size.

This patch drops flat_stack_align() and uses the same alignment that
is required for slab caches, ARCH_SLAB_MINALIGN, or wordsize if it's
not defined by the architecture.

It also fixes m32r which was obviously kaput, aligning an
uninitialized stack entry instead of the stack pointer.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oskar Schirmer <os@emlix.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Johannes Weiner <jw@emlix.com>
Acked-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
David Howells 0f3e442a40 FLAT: Don't attempt to expand the userspace stack to fill the space allocated
Stop the FLAT binfmt from attempting to expand the userspace stack and brk
segments to fill the space actually allocated for it.  The space allocated may
be rounded up by mmap(), and may be wasted.

However, finding out how much space we actually obtained uses the contentious
kobjsize() function which we'd like to get rid of as it doesn't necessarily
work for all slab allocators.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Mike Frysinger <vapier.adi@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
2009-01-08 12:04:47 +00:00
David Howells a6f76f23d2 CRED: Make execve() take advantage of copy-on-write credentials
Make execve() take advantage of copy-on-write credentials, allowing it to set
up the credentials in advance, and then commit the whole lot after the point
of no return.

This patch and the preceding patches have been tested with the LTP SELinux
testsuite.

This patch makes several logical sets of alteration:

 (1) execve().

     The credential bits from struct linux_binprm are, for the most part,
     replaced with a single credentials pointer (bprm->cred).  This means that
     all the creds can be calculated in advance and then applied at the point
     of no return with no possibility of failure.

     I would like to replace bprm->cap_effective with:

	cap_isclear(bprm->cap_effective)

     but this seems impossible due to special behaviour for processes of pid 1
     (they always retain their parent's capability masks where normally they'd
     be changed - see cap_bprm_set_creds()).

     The following sequence of events now happens:

     (a) At the start of do_execve, the current task's cred_exec_mutex is
     	 locked to prevent PTRACE_ATTACH from obsoleting the calculation of
     	 creds that we make.

     (a) prepare_exec_creds() is then called to make a copy of the current
     	 task's credentials and prepare it.  This copy is then assigned to
     	 bprm->cred.

  	 This renders security_bprm_alloc() and security_bprm_free()
     	 unnecessary, and so they've been removed.

     (b) The determination of unsafe execution is now performed immediately
     	 after (a) rather than later on in the code.  The result is stored in
     	 bprm->unsafe for future reference.

     (c) prepare_binprm() is called, possibly multiple times.

     	 (i) This applies the result of set[ug]id binaries to the new creds
     	     attached to bprm->cred.  Personality bit clearance is recorded,
     	     but now deferred on the basis that the exec procedure may yet
     	     fail.

         (ii) This then calls the new security_bprm_set_creds().  This should
	     calculate the new LSM and capability credentials into *bprm->cred.

	     This folds together security_bprm_set() and parts of
	     security_bprm_apply_creds() (these two have been removed).
	     Anything that might fail must be done at this point.

         (iii) bprm->cred_prepared is set to 1.

	     bprm->cred_prepared is 0 on the first pass of the security
	     calculations, and 1 on all subsequent passes.  This allows SELinux
	     in (ii) to base its calculations only on the initial script and
	     not on the interpreter.

     (d) flush_old_exec() is called to commit the task to execution.  This
     	 performs the following steps with regard to credentials:

	 (i) Clear pdeath_signal and set dumpable on certain circumstances that
	     may not be covered by commit_creds().

         (ii) Clear any bits in current->personality that were deferred from
             (c.i).

     (e) install_exec_creds() [compute_creds() as was] is called to install the
     	 new credentials.  This performs the following steps with regard to
     	 credentials:

         (i) Calls security_bprm_committing_creds() to apply any security
             requirements, such as flushing unauthorised files in SELinux, that
             must be done before the credentials are changed.

	     This is made up of bits of security_bprm_apply_creds() and
	     security_bprm_post_apply_creds(), both of which have been removed.
	     This function is not allowed to fail; anything that might fail
	     must have been done in (c.ii).

         (ii) Calls commit_creds() to apply the new credentials in a single
             assignment (more or less).  Possibly pdeath_signal and dumpable
             should be part of struct creds.

	 (iii) Unlocks the task's cred_replace_mutex, thus allowing
	     PTRACE_ATTACH to take place.

         (iv) Clears The bprm->cred pointer as the credentials it was holding
             are now immutable.

         (v) Calls security_bprm_committed_creds() to apply any security
             alterations that must be done after the creds have been changed.
             SELinux uses this to flush signals and signal handlers.

     (f) If an error occurs before (d.i), bprm_free() will call abort_creds()
     	 to destroy the proposed new credentials and will then unlock
     	 cred_replace_mutex.  No changes to the credentials will have been
     	 made.

 (2) LSM interface.

     A number of functions have been changed, added or removed:

     (*) security_bprm_alloc(), ->bprm_alloc_security()
     (*) security_bprm_free(), ->bprm_free_security()

     	 Removed in favour of preparing new credentials and modifying those.

     (*) security_bprm_apply_creds(), ->bprm_apply_creds()
     (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds()

     	 Removed; split between security_bprm_set_creds(),
     	 security_bprm_committing_creds() and security_bprm_committed_creds().

     (*) security_bprm_set(), ->bprm_set_security()

     	 Removed; folded into security_bprm_set_creds().

     (*) security_bprm_set_creds(), ->bprm_set_creds()

     	 New.  The new credentials in bprm->creds should be checked and set up
     	 as appropriate.  bprm->cred_prepared is 0 on the first call, 1 on the
     	 second and subsequent calls.

     (*) security_bprm_committing_creds(), ->bprm_committing_creds()
     (*) security_bprm_committed_creds(), ->bprm_committed_creds()

     	 New.  Apply the security effects of the new credentials.  This
     	 includes closing unauthorised files in SELinux.  This function may not
     	 fail.  When the former is called, the creds haven't yet been applied
     	 to the process; when the latter is called, they have.

 	 The former may access bprm->cred, the latter may not.

 (3) SELinux.

     SELinux has a number of changes, in addition to those to support the LSM
     interface changes mentioned above:

     (a) The bprm_security_struct struct has been removed in favour of using
     	 the credentials-under-construction approach.

     (c) flush_unauthorized_files() now takes a cred pointer and passes it on
     	 to inode_has_perm(), file_has_perm() and dentry_open().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:24 +11:00
Volodymyr G. Lukiianyk f4cfb18d79 uclinux: fix gzip header parsing in binfmt_flat.c
There are off-by-one errors in decompress_exec() when calculating the length of
optional "original file name" and "comment" fields: the "ret" index is not
incremented when terminating '\0' character is reached. The check of the buffer
overflow (after an "extra-field" length was taken into account) is also fixed.

I've encountered this off-by-one error when tried to reuse
gzip-header-parsing part of the decompress_exec() function.  There was an
"original file name" field in the payload (with miscalculated length) and
zlib_inflate() returned Z_DATA_ERROR.  But after the fix similar to this
one all worked fine.

Signed-off-by: Volodymyr G Lukiianyk <volodymyrgl@gmail.com>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:29 -07:00
Takashi YOSHII 74c27c43eb binfmt_flat: Stub in a FLAT_PLAT_INIT().
This provides a FLAT_PLAT_INIT() arch hook for platforms that need to set
up specific register state prior to calling in to the process, as per
ELF_PLAT_INIT().

Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11 20:17:55 +09:00
Roland McGrath 6341c393fc tracehook: exec
This moves all the ptrace hooks related to exec into tracehook.h inlines.

This also lifts the calls for tracing out of the binfmt load_binary hooks
into search_binary_handler() after it calls into the binfmt module.  This
change has no effect, since all the binfmt modules' load_binary functions
did the call at the end on success, and now search_binary_handler() does
it immediately after return if successful.  We consolidate the repeated
code, and binfmt modules no longer need to import ptrace_notify().

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:08 -07:00
Pekka Enberg d100d148aa nommu: fix ksize() abuse
The nommu binfmt code uses ksize() for pointers returned from do_mmap()
which is wrong.  This converts the call-sites to use the nommu specific
kobjsize() function which works as expected.

Cc: Christoph Lameter <clameter@sgi.com>
Cc: Matt Mackall <mpm@selenic.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06 11:29:13 -07:00
Matt Helsley 925d1c401f procfs task exe symlink
The kernel implements readlink of /proc/pid/exe by getting the file from
the first executable VMA.  Then the path to the file is reconstructed and
reported as the result.

Because of the VMA walk the code is slightly different on nommu systems.
This patch avoids separate /proc/pid/exe code on nommu systems.  Instead of
walking the VMAs to find the first executable file-backed VMA we store a
reference to the exec'd file in the mm_struct.

That reference would prevent the filesystem holding the executable file
from being unmounted even after unmapping the VMAs.  So we track the number
of VM_EXECUTABLE VMAs and drop the new reference when the last one is
unmapped.  This avoids pinning the mounted filesystem.

[akpm@linux-foundation.org: improve comments]
[yamamoto@valinux.co.jp: fix dup_mmap]
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: David Howells <dhowells@redhat.com>
Cc:"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:17 -07:00
Adrian Bunk 3202e1811f make BINFMT_FLAT a bool
I have not yet seen anyone saying he has a reasonable use case for using
BINFMT_FLAT modular on his embedded device.

Considering that fs/binfmt_flat.c even lacks a MODULE_LICENSE() I really doubt
there is any, and this patch therefore makes BINFMT_FLAT a bool.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Bryan Wu <cooloney.lkml@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:01 -07:00
Mike Frysinger e2a366dc5c FLAT binaries: drop BINFMT_FLAT bad header magic warning
The warning issued by fs/binfmt_flat.c when the format handler is given a
non-FLAT and non-script executable is annoying to say the least when working
with FDPIC ELF objects.  If you build a kernel that supports both FLAT and
FDPIC ELFs on no-mmu, every time you execute an FDPIC ELF, the kernel spits
out this message.  While I understand a lot of newcomers to the no-mmu world
screw up generation of FLAT binaries, this warning is not usable for systems
that support more than just FLAT.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Bernd Schmidt <bernds_cb1@t-online.de>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 20:58:05 -08:00
David Howells 1eb1141123 aout: remove unnecessary inclusions of {asm, linux}/a.out.h
Remove now unnecessary inclusions of {asm,linux}/a.out.h.

[akpm@linux-foundation.org: fix alpha build]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:30 -08:00
Andrew Morton 0e647c04f6 binfmt_flat: warning fixes
Fix this lot:

fs/binfmt_flat.c: In function `decompress_exec':
fs/binfmt_flat.c:293: warning: label `out' defined but not used
fs/binfmt_flat.c: In function `load_flat_file':
fs/binfmt_flat.c:462: warning: unsigned int format, long int arg (arg 3)
fs/binfmt_flat.c:462: warning: unsigned int format, long int arg (arg 4)
fs/binfmt_flat.c:518: warning: comparison of distinct pointer types lacks a cast
fs/binfmt_flat.c:549: warning: passing arg 1 of `ksize' makes pointer from integer without a cast
fs/binfmt_flat.c:601: warning: passing arg 1 of `ksize' makes pointer from integer without a cast
fs/binfmt_flat.c: In function `load_flat_binary':
fs/binfmt_flat.c:116: warning: 'dummy' might be used uninitialized in this function

Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:54 -07:00
Neil Horman 7dc0b22e3c core_pattern: ignore RLIMIT_CORE if core_pattern is a pipe
For some time /proc/sys/kernel/core_pattern has been able to set its output
destination as a pipe, allowing a user space helper to receive and
intellegently process a core.  This infrastructure however has some
shortcommings which can be enhanced.  Specifically:

1) The coredump code in the kernel should ignore RLIMIT_CORE limitation
   when core_pattern is a pipe, since file system resources are not being
   consumed in this case, unless the user application wishes to save the core,
   at which point the app is restricted by usual file system limits and
   restrictions.

2) The core_pattern code should be able to parse and pass options to the
   user space helper as an argv array.  The real core limit of the uid of the
   crashing proces should also be passable to the user space helper (since it
   is overridden to zero when called).

3) Some miscellaneous bugs need to be cleaned up (specifically the
   recognition of a recursive core dump, should the user mode helper itself
   crash.  Also, the core dump code in the kernel should not wait for the user
   mode helper to exit, since the same context is responsible for writing to
   the pipe, and a read of the pipe by the user mode helper will result in a
   deadlock.

This patch:

Remove the check of RLIMIT_CORE if core_pattern is a pipe.  In the event that
core_pattern is a pipe, the entire core will be fed to the user mode helper.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Cc: <martin.pitt@ubuntu.com>
Cc: <wwoods@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:50 -07:00
Andrew Morton 576bb9ced2 binfmt_flat: checkpatch fixing minimum support for the blackfin relocations
Cc: Bernd Schmidt <bernd.schmidt@analog.com>
Cc: David McCullough <davidm@snapgear.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: Miles Bader <miles.bader@necel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-03 23:43:57 +08:00
Bernd Schmidt f9720205d1 Binfmt_flat: Add minimum support for the Blackfin relocations
Add minimum support for the Blackfin relocations, since we don't have
enough space in each reloc.  The idea is to store a value with one
relocation so that subsequent ones can access it.

Actually, this patch is required for Blackfin.  Currently if BINFMT_FLAT is
enabled, git-tree kernel will fail to compile.

Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: David McCullough <davidm@snapgear.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: Miles Bader <miles.bader@necel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-10-03 23:41:43 +08:00
Greg Ungerer c287ef1ff9 nommu: report correct errno in message
Report the correct errno for out of memory debug output in binfmt_flat.c

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08 17:23:32 -07:00
Greg Ungerer 72613e5f44 [PATCH] uclinux: correctly remap bin_fmtflat exe allocated mem regions
remap() the region we get from mmap() to mark the fact that we are
using all of the available slack space. Any slack space is used
to form a simple brk region, and potentially more stack space than
requested at load time.

Any searches of the vma chain may well fail looking for
stack (and especially arg) addresses if the remaping is not done.
The simplest example is /proc/<pid>/cmdline, since the args
are pretty much always at the top of the data/bss/stack region.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 10:45:33 -08:00
Josef "Jeff" Sipek 0f7fc9e4d0 [PATCH] VFS: change struct file to use struct path
This patch changes struct file to use struct path instead of having
independent pointers to struct dentry and struct vfsmount, and converts all
users of f_{dentry,vfsmnt} in fs/ to use f_path.{dentry,mnt}.

Additionally, it adds two #define's to make the transition easier for users of
the f_dentry and f_vfsmnt.

Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:41 -08:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Malcolm Parsons fcc18e83e1 [PATCH] uclinux: use PER_LINUX_32BIT in binfmt_flat
binfmt_flat.c calls set_personality with PER_LINUX as the personality.
On the arm architecture this results in the program running in 26bit
usermode.  PER_LINUX_32BIT should be used instead.  This doesn't affect
other architectures that use binfmt_flat.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 21:04:24 -07:00
Andrew Morton df88912a21 [PATCH] binfmt_flat: don't check for EMFILE
Bernd Schmidt points out that binfmt_flat is now leaving the exec file open
while the application runs.  This offsets all the application's fd numbers.
We should have closed the file within exec(), not at exit()-time.

But there doesn't seem to be a lot of point in doing all this just to avoid
going over RLIMIT_NOFILE by one fd for a few microseconds.  So take the EMFILE
checking out again.  This will cause binfmt_flat to again fail LTP's
exec-should-return-EMFILE-when-fdtable-is-full test.  That test appears to be
wrong anyway - Open Group specs say nothing about exec() returning EMFILE.

Cc: Bernd Schmidt <bernd.schmidt@analog.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:17 -07:00
Luke Yang 1ad3dcc09c [PATCH] flat binary loader doesn't check fd table full
In binfmt_flat.c, the flat binary loader should check file descriptor table
and install the fd on the file.

Convert the function to single-exit and fix this bug.

Signed-off-by: "Luke Yang" <luke.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:23:01 -08:00
Greg Ungerer 845884d332 [PATCH] uclinux: delay binfmt_flat trace
Modify the initial trace output (which is based on flags in the binary
header) so that it is not done until after the magic number check.  This
may well not be a flat format binary, so the flags could be invalid.
(Prime example, running a script).

Changes prompted by patches from Stuart Hughs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 09:31:27 -08:00
akpm@osdl.org df2e71fb91 [PATCH] dump_thread() cleanup
)

From: Adrian Bunk <bunk@stusta.de>

- create one common dump_thread() prototype in kernel.h

- dump_thread() is only used in fs/binfmt_aout.c and can therefore be
  removed on all architectures where CONFIG_BINFMT_AOUT is not
  available

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:25 -08:00
Hugh Dickins 404351e67a [PATCH] mm: mm_init set_mm_counters
How is anon_rss initialized?  In dup_mmap, and by mm_alloc's memset; but
that's not so good if an mm_counter_t is a special type.  And how is rss
initialized?  By set_mm_counter, all over the place.  Come on, we just need to
initialize them both at once by set_mm_counter in mm_init (which follows the
memcpy when forking).

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:38 -07:00
Greg Ungerer 213b24c93b [PATCH] uclinux: use MAP_PRIVATE when mmaping code regions in flat binary loader
Use MAP_PRIVATE when calling mmap to get memory for the code region.
The flat loader was using MAP_SHARED, but underlying changes to the
MMUless mmap means this is now wrong.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:31 -07:00
Yoshinori Sato 8f5bb0438b [PATCH] binfmt_flat mmap flag fix
Make sure that binfmt_flat passes the correct flags into do_mmap().  nommu's
validate_mmap_request() will simple return -EINVAL if we try and pass it a
flags value of zero.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-06 14:57:51 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00