Граф коммитов

3500 Коммитов

Автор SHA1 Сообщение Дата
Darrick J. Wong 2e53840362 ext4: don't allow any modifications to an immutable file
Don't allow any modifications to a file that's marked immutable, which
means that we have to flush all the writable pages to make the readonly
and we have to check the setattr/setflags parameters more closely.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2019-06-09 21:41:41 -04:00
Jan Kara b9c1c26739 ext4: gracefully handle ext4_break_layouts() failure during truncate
ext4_break_layouts() may fail e.g. due to a signal being delivered.
Thus we need to handle its failure gracefully and not by taking the
filesystem down. Currently ext4_break_layouts() failure is rare but it
may become more common once RDMA uses layout leases for handling
long-term page pins for DAX mappings.

To handle the failure we need to move ext4_break_layouts() earlier
during setattr handling before we do hard to undo changes such as
modifying inode size. To be able to do that we also have to move some
other checks which are better done without holding i_mmap_sem earlier.

Reported-and-tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-05-30 11:56:23 -04:00
Eric Biggers 6e4b73bcd1 ext4: encrypt only up to last block in ext4_bio_write_page()
As an optimization, don't encrypt blocks fully beyond i_size, since
those definitely won't need to be written out.  Also add a comment.

This is in preparation for allowing encryption on ext4 filesystems with
blocksize != PAGE_SIZE.

This is based on work by Chandan Rajendra.

Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28 10:27:53 -07:00
Chandan Rajendra ec39a36867 ext4: decrypt only the needed block in __ext4_block_zero_page_range()
In __ext4_block_zero_page_range(), only decrypt the block that actually
needs to be decrypted, rather than assuming blocksize == PAGE_SIZE and
decrypting the whole page.

This is in preparation for allowing encryption on ext4 filesystems with
blocksize != PAGE_SIZE.

Signed-off-by: Chandan Rajendra <chandan@linux.ibm.com>
(EB: rebase onto previous changes, improve the commit message, and use
 bh_offset())
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28 10:27:53 -07:00
Chandan Rajendra 0b578f358a ext4: decrypt only the needed blocks in ext4_block_write_begin()
In ext4_block_write_begin(), only decrypt the blocks that actually need
to be decrypted (up to two blocks which intersect the boundaries of the
region that will be written to), rather than assuming blocksize ==
PAGE_SIZE and decrypting the whole page.

This is in preparation for allowing encryption on ext4 filesystems with
blocksize != PAGE_SIZE.

Signed-off-by: Chandan Rajendra <chandan@linux.ibm.com>
(EB: rebase onto previous changes, improve the commit message,
 and move the check for encrypted inode)
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28 10:27:53 -07:00
Chandan Rajendra 7e0785fce1 ext4: clear BH_Uptodate flag on decryption error
If decryption fails, ext4_block_write_begin() can return with the page's
buffer_head marked with the BH_Uptodate flag.  This commit clears the
BH_Uptodate flag in such cases.

Signed-off-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28 10:27:53 -07:00
Eric Biggers aa8bc1ac6e fscrypt: support decrypting multiple filesystem blocks per page
Rename fscrypt_decrypt_page() to fscrypt_decrypt_pagecache_blocks() and
redefine its behavior to decrypt all filesystem blocks in the given
region of the given page, rather than assuming that the region consists
of just one filesystem block.  Also remove the 'inode' and 'lblk_num'
parameters, since they can be retrieved from the page as it's already
assumed to be a pagecache page.

This is in preparation for allowing encryption on ext4 filesystems with
blocksize != PAGE_SIZE.

This is based on work by Chandan Rajendra.

Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28 10:27:53 -07:00
Eric Biggers 53bc1d854c fscrypt: support encrypting multiple filesystem blocks per page
Rename fscrypt_encrypt_page() to fscrypt_encrypt_pagecache_blocks() and
redefine its behavior to encrypt all filesystem blocks from the given
region of the given page, rather than assuming that the region consists
of just one filesystem block.  Also remove the 'inode' and 'lblk_num'
parameters, since they can be retrieved from the page as it's already
assumed to be a pagecache page.

This is in preparation for allowing encryption on ext4 filesystems with
blocksize != PAGE_SIZE.

This is based on work by Chandan Rajendra.

Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28 10:27:53 -07:00
Eric Biggers d2d0727b16 fscrypt: simplify bounce page handling
Currently, bounce page handling for writes to encrypted files is
unnecessarily complicated.  A fscrypt_ctx is allocated along with each
bounce page, page_private(bounce_page) points to this fscrypt_ctx, and
fscrypt_ctx::w::control_page points to the original pagecache page.

However, because writes don't use the fscrypt_ctx for anything else,
there's no reason why page_private(bounce_page) can't just point to the
original pagecache page directly.

Therefore, this patch makes this change.  In the process, it also cleans
up the API exposed to filesystems that allows testing whether a page is
a bounce page, getting the pagecache page from a bounce page, and
freeing a bounce page.

Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28 10:27:52 -07:00
Linus Torvalds 35efb51eee Bug fixes (including a regression fix) for ext4.
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlzppnIACgkQ8vlZVpUN
 gaOWcwf/YmIeCi7HHuOJG5STYhMZjbAoK7eCNSjmP0HBIpyZSBaSZg1/ZEmtTVA6
 SyGWxYD2xymphkEcRQ20pF8h2CYurHsjYl9RH+Im2iaCzdeFKvgfYxSSsqsaZixM
 ejQK22W6mVULd1RqFGNPeo+5v7Fxn6fK0zw2k5JrLjFnIRq/XIA7qMdjblPOcfi+
 QT/K9a2DZ5vHBGDKjEiVA+a0HX6bxdGTiiT4LW+uiHUJUESBWNQJqOHJqno9VdFh
 J97/3XJHMGPAbjD4AiINAL0x8IZ2FXx1H+QgVDnrxy8lVrYaMVvWMEokMQ7HvkFr
 SmYddgBPUHO+kk4u34nznZNuesvOqQ==
 =dFk1
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Bug fixes (including a regression fix) for ext4"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix dcache lookup of !casefolded directories
  ext4: do not delete unlinked inode from orphan list on failed truncate
  ext4: wait for outstanding dio during truncate in nojournal mode
  ext4: don't perform block validity checks on the journal inode
2019-05-25 15:03:12 -07:00
Gabriel Krisman Bertazi 66883da1ee ext4: fix dcache lookup of !casefolded directories
Found by visual inspection, this wasn't caught by my xfstest, since it's
effect is ignoring positive dentries in the cache the fallback just goes
to the disk.  it was introduced in the last iteration of the
case-insensitive patch.

d_compare should return 0 when the entries match, so make sure we are
correctly comparing the entire string if the encoding feature is set and
we are on a case-INsensitive directory.

Fixes: b886ee3e77 ("ext4: Support case-insensitive file name lookups")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-05-24 23:48:23 -04:00
Jan Kara ee0ed02ca9 ext4: do not delete unlinked inode from orphan list on failed truncate
It is possible that unlinked inode enters ext4_setattr() (e.g. if
somebody calls ftruncate(2) on unlinked but still open file). In such
case we should not delete the inode from the orphan list if truncate
fails. Note that this is mostly a theoretical concern as filesystem is
corrupted if we reach this path anyway but let's be consistent in our
orphan handling.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2019-05-23 23:35:28 -04:00
Jan Kara 82a25b027c ext4: wait for outstanding dio during truncate in nojournal mode
We didn't wait for outstanding direct IO during truncate in nojournal
mode (as we skip orphan handling in that case). This can lead to fs
corruption or stale data exposure if truncate ends up freeing blocks
and these get reallocated before direct IO finishes. Fix the condition
determining whether the wait is necessary.

CC: stable@vger.kernel.org
Fixes: 1c9114f9c0 ("ext4: serialize unlocked dio reads with truncate")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-05-23 23:07:08 -04:00
Theodore Ts'o 0a944e8a6c ext4: don't perform block validity checks on the journal inode
Since the journal inode is already checked when we added it to the
block validity's system zone, if we check it again, we'll just trigger
a failure.

This was causing failures like this:

[   53.897001] EXT4-fs error (device sda): ext4_find_extent:909: inode
#8: comm jbd2/sda-8: pblk 121667583 bad header/extent: invalid extent entries - magic f30a, entries 8, max 340(340), depth 0(0)
[   53.931430] jbd2_journal_bmap: journal block not found at offset 49 on sda-8
[   53.938480] Aborting journal on device sda-8.

... but only if the system was under enough memory pressure that
logical->physical mapping for the journal inode gets pushed out of the
extent cache.  (This is why it wasn't noticed earlier.)

Fixes: 345c0dbf3a ("ext4: protect journal inode's blocks using block_validity")
Reported-by: Dan Rue <dan.rue@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
2019-05-22 10:27:01 -04:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Linus Torvalds c4d36b63b2 Some bug fixes, and an update to the URL's for the final version of
Unicode 12.1.0.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlzg2qIACgkQ8vlZVpUN
 gaPYfgf+IadtbeBYbKcHQzw8OZ9UxyGv7+Havs523XzhdceiflpOCe3lpSFYuX6w
 0CtRIWEOqFzQLRHUlX/sRywYLvrvg3irDuYJGTzny9MfPEI+tVCkYi877PPAOOR3
 4xay7dF63mcCpmhRxgw1fLx5I/hYpzrDnw5dGe7jjgU6SrR5FpE2GmEmbfBW087W
 zAuRDkuTv03J791Kgpq4TAMNla9F2/oedq/2B0v43+TnKfYe1SEIDm3VusUvSfoI
 ++8CfRrRJ3D7vCmtFSuieFFb91HtHMqdv0gaad2cY1DfvJLVm7gP1uPL7QahA5Dq
 VfhvFfqshqN9Jizr6BqP5GPOj2J9cw==
 =QK+R
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Some bug fixes, and an update to the URL's for the final version of
  Unicode 12.1.0"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: avoid panic during forced reboot due to aborted journal
  ext4: fix block validity checks for journal inodes using indirect blocks
  unicode: update to Unicode 12.1.0 final
  unicode: add missing check for an error return from utf8lookup()
  ext4: fix miscellaneous sparse warnings
  ext4: unsigned int compared against zero
  ext4: fix use-after-free in dx_release()
  ext4: fix data corruption caused by overlapping unaligned and aligned IO
  jbd2: fix potential double free
  ext4: zero out the unused memory region in the extent tree block
2019-05-19 11:43:16 -07:00
Jan Kara 2c1d0e3631 ext4: avoid panic during forced reboot due to aborted journal
Handling of aborted journal is a special code path different from
standard ext4_error() one and it can call panic() as well. Commit
1dc1097ff6 ("ext4: avoid panic during forced reboot") forgot to update
this path so fix that omission.

Fixes: 1dc1097ff6 ("ext4: avoid panic during forced reboot")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 5.1
2019-05-17 17:37:18 -04:00
Theodore Ts'o 170417c8c7 ext4: fix block validity checks for journal inodes using indirect blocks
Commit 345c0dbf3a ("ext4: protect journal inode's blocks using
block_validity") failed to add an exception for the journal inode in
ext4_check_blockref(), which is the function used by ext4_get_branch()
for indirect blocks.  This caused attempts to read from the ext3-style
journals to fail with:

[  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode #8: block 30343695: comm jbd2/sdb7-8: invalid block

Fix this by adding the missing exception check.

Fixes: 345c0dbf3a ("ext4: protect journal inode's blocks using block_validity")
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-05-15 00:51:19 -04:00
Theodore Ts'o 0ba33facfc ext4: fix miscellaneous sparse warnings
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-05-12 04:49:47 -04:00
Colin Ian King fbbbbd2f28 ext4: unsigned int compared against zero
There are two cases where u32 variables n and err are being checked
for less than zero error values, the checks is always false because
the variables are not signed. Fix this by making the variables ints.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 345c0dbf3a ("ext4: protect journal inode's blocks using block_validity")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-05-10 22:06:38 -04:00
Sahitya Tummala 08fc98a4d6 ext4: fix use-after-free in dx_release()
The buffer_head (frames[0].bh) and it's corresping page can be
potentially free'd once brelse() is done inside the for loop
but before the for loop exits in dx_release(). It can be free'd
in another context, when the page cache is flushed via
drop_caches_sysctl_handler(). This results into below data abort
when accessing info->indirect_levels in dx_release().

Unable to handle kernel paging request at virtual address ffffffc17ac3e01e
Call trace:
 dx_release+0x70/0x90
 ext4_htree_fill_tree+0x2d4/0x300
 ext4_readdir+0x244/0x6f8
 iterate_dir+0xbc/0x160
 SyS_getdents64+0x94/0x174

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org
2019-05-10 22:00:33 -04:00
Lukas Czerner 57a0da28ce ext4: fix data corruption caused by overlapping unaligned and aligned IO
Unaligned AIO must be serialized because the zeroing of partial blocks
of unaligned AIO can result in data corruption in case it's overlapping
another in flight IO.

Currently we wait for all unwritten extents before we submit unaligned
AIO which protects data in case of unaligned AIO is following overlapping
IO. However if a unaligned AIO is followed by overlapping aligned AIO we
can still end up corrupting data.

To fix this, we must make sure that the unaligned AIO is the only IO in
flight by waiting for unwritten extents conversion not just before the
IO submission, but right after it as well.

This problem can be reproduced by xfstest generic/538

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2019-05-10 21:45:33 -04:00
Sriram Rajagopalan 592acbf168 ext4: zero out the unused memory region in the extent tree block
This commit zeroes out the unused memory region in the buffer_head
corresponding to the extent metablock after writing the extent header
and the corresponding extent node entries.

This is done to prevent random uninitialized data from getting into
the filesystem when the extent block is synced.

This fixes CVE-2019-11833.

Signed-off-by: Sriram Rajagopalan <sriramr@arista.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2019-05-10 19:28:06 -04:00
Linus Torvalds a9fbcd6728 Clean up fscrypt's dcache revalidation support, and other
miscellaneous cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlzSEfQACgkQ8vlZVpUN
 gaNKrQf+O4JCCc8jqhpvUcNr8+DJNhWYpvRo7yDXoWbAyA6eZHV2fTRX5Vw6T8bW
 iQAj9ofkRnakOq6JvnaUyW8eAuRcqellF7HnwFwTxGOpZ1x3UPAV/roKutAhe8sT
 9dA0VxjugBAISbL2AMQKRPYNuzV07D9As6wZRlPuliFVLLnuPG5SseHRhdn3tm1n
 Jwyipu8P6BjomFtfHT25amISaWRx/uGpjTa1fmjwUxIC8EI6V9K6hKNCAUPsk/3g
 m8zEBpBKSmPK66sFPGxddPNGYAyyFluUboQxB7DuSCF7J3cULO8TxRZbsW/5jaio
 ZR8utWezuXnrI80vG/VtCMhqG3398Q==
 =0Bak
 -----END PGP SIGNATURE-----

Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt

Pull fscrypt updates from Ted Ts'o:
 "Clean up fscrypt's dcache revalidation support, and other
  miscellaneous cleanups"

* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: cache decrypted symlink target in ->i_link
  vfs: use READ_ONCE() to access ->i_link
  fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext
  fscrypt: only set dentry_operations on ciphertext dentries
  fs, fscrypt: clear DCACHE_ENCRYPTED_NAME when unaliasing directory
  fscrypt: fix race allowing rename() and link() of ciphertext dentries
  fscrypt: clean up and improve dentry revalidation
  fscrypt: use READ_ONCE() to access ->i_crypt_info
  fscrypt: remove WARN_ON_ONCE() when decryption fails
  fscrypt: drop inode argument from fscrypt_get_ctx()
2019-05-07 21:28:04 -07:00
Linus Torvalds 5abe37954e Add as a feature case-insensitive directories (the casefold feature)
using Unicode 12.1.  Also, the usual largish number of cleanups and bug
 fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlzSDXYACgkQ8vlZVpUN
 gaPQ3Qf/Sh0NqHbmbdW1J52oh4GqUKUhUezEac40yZcZBU4p3PFPZ5Ji83kAQV5r
 JgHx5YW4AYHs59UkRVq/er7wKEFJxAE8weUq90WYLE1Z/EjojDE8JHSsK00obKNN
 rJOm5qX/gy5C7PVUSWkSuAZQPMSGrmH5U5ie0nrI7bFWnr7T5CQkWarspUq53JBG
 RP910mPTT/otE7iTgUzjDeAMKfaSdtRhcJn/uTQ+2YZ1BJsHBHJHDnfQtd3CttHs
 ncTUaqPnhWqOKJV2Y9TDyAWYeSbn30cF0dpBM38N4u6YwaUwrBp/kPI0tes97SgY
 lZM4VEAW6iF+18uLSyv7D0Mpba9qQg==
 =9R7U
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Add as a feature case-insensitive directories (the casefold feature)
  using Unicode 12.1.

  Also, the usual largish number of cleanups and bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
  ext4: export /sys/fs/ext4/feature/casefold if Unicode support is present
  ext4: fix ext4_show_options for file systems w/o journal
  unicode: refactor the rule for regenerating utf8data.h
  docs: ext4.rst: document case-insensitive directories
  ext4: Support case-insensitive file name lookups
  ext4: include charset encoding information in the superblock
  MAINTAINERS: add Unicode subsystem entry
  unicode: update unicode database unicode version 12.1.0
  unicode: introduce test module for normalized utf8 implementation
  unicode: implement higher level API for string handling
  unicode: reduce the size of utf8data[]
  unicode: introduce code for UTF-8 normalization
  unicode: introduce UTF-8 character database
  ext4: actually request zeroing of inode table after grow
  ext4: cond_resched in work-heavy group loops
  ext4: fix use-after-free race with debug_want_extra_isize
  ext4: avoid drop reference to iloc.bh twice
  ext4: ignore e_value_offs for xattrs with value-in-ea-inode
  ext4: protect journal inode's blocks using block_validity
  ext4: use BUG() instead of BUG_ON(1)
  ...
2019-05-07 21:12:44 -07:00
Linus Torvalds 67a2422239 for-5.2/block-20190507
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlzR0AAQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpo0MD/47D1kBK9rGzkAwIz1Jkh1Qy/ITVaDJzmHJ
 UP5uncQsgKFLKMR1LbRcrWtmk2MwFDNULGbteHFeCYE1ypCrTgpWSp5+SJluKd1Q
 hma9krLSAXO9QiSaZ4jafshXFIZxz6IjakOW8c9LrT80Ze47yh7AxiLwDafcp/Jj
 x6NW790qB7ENDtfarDkZk14NCS8HGLRHO5B21LB+hT0Kfbh0XZaLzJdj7Mck1wPA
 VT8hL9mPuA++AjF7Ra4kUjwSakgmajTa3nS2fpkwTYdztQfas7x5Jiv7FWxrrelb
 qbabkNkWKepcHAPEiZR7o53TyfCucGeSK/jG+dsJ9KhNp26kl1ci3frl5T6PfVMP
 SPPDjsKIHs+dqFrU9y5rSGhLJqewTs96hHthnLGxyF67+5sRb5+YIy+dcqgiyc/b
 TUVyjCD6r0cO2q4v9VhwnhOyeBUA9Rwbu8nl7JV5Q45uG7qI4BC39l1jfubMNDPO
 GLNGUUzb6ER7z6lYINjRSF2Jhejsx8SR9P7jhpb1Q7k/VvDDxO1T4FpwvqWFz9+s
 Gn+s6//+cA6LL+42eZkQjvwF2CUNE7TaVT8zdb+s5HP1RQkZToqUnsQCGeRTrFni
 RqWXfW9o9+awYRp431417oMdX/LvLGq9+ZtifRk9DqDcowXevTaf0W2RpplWSuiX
 RcCuPeLAVg==
 =Ot0g
 -----END PGP SIGNATURE-----

Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "Nothing major in this series, just fixes and improvements all over the
  map. This contains:

   - Series of fixes for sed-opal (David, Jonas)

   - Fixes and performance tweaks for BFQ (via Paolo)

   - Set of fixes for bcache (via Coly)

   - Set of fixes for md (via Song)

   - Enabling multi-page for passthrough requests (Ming)

   - Queue release fix series (Ming)

   - Device notification improvements (Martin)

   - Propagate underlying device rotational status in loop (Holger)

   - Removal of mtip32xx trim support, which has been disabled for years
     (Christoph)

   - Improvement and cleanup of nvme command handling (Christoph)

   - Add block SPDX tags (Christoph)

   - Cleanup/hardening of bio/bvec iteration (Christoph)

   - A few NVMe pull requests (Christoph)

   - Removal of CONFIG_LBDAF (Christoph)

   - Various little fixes here and there"

* tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits)
  block: fix mismerge in bvec_advance
  block: don't drain in-progress dispatch in blk_cleanup_queue()
  blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release
  blk-mq: always free hctx after request queue is freed
  blk-mq: split blk_mq_alloc_and_init_hctx into two parts
  blk-mq: free hw queue's resource in hctx's release handler
  blk-mq: move cancel of requeue_work into blk_mq_release
  blk-mq: grab .q_usage_counter when queuing request from plug code path
  block: fix function name in comment
  nvmet: protect discovery change log event list iteration
  nvme: mark nvme_core_init and nvme_core_exit static
  nvme: move command size checks to the core
  nvme-fabrics: check more command sizes
  nvme-pci: check more command sizes
  nvme-pci: remove an unneeded variable initialization
  nvme-pci: unquiesce admin queue on shutdown
  nvme-pci: shutdown on timeout during deletion
  nvme-pci: fix psdt field for single segment sgls
  nvme-multipath: don't print ANA group state by default
  nvme-multipath: split bios with the ns_head bio_set before submitting
  ...
2019-05-07 18:14:36 -07:00
Linus Torvalds 168e153d5e Merge branch 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs inode freeing updates from Al Viro:
 "Introduction of separate method for RCU-delayed part of
  ->destroy_inode() (if any).

  Pretty much as posted, except that destroy_inode() stashes
  ->free_inode into the victim (anon-unioned with ->i_fops) before
  scheduling i_callback() and the last two patches (sockfs conversion
  and folding struct socket_wq into struct socket) are excluded - that
  pair should go through netdev once davem reopens his tree"

* 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits)
  orangefs: make use of ->free_inode()
  shmem: make use of ->free_inode()
  hugetlb: make use of ->free_inode()
  overlayfs: make use of ->free_inode()
  jfs: switch to ->free_inode()
  fuse: switch to ->free_inode()
  ext4: make use of ->free_inode()
  ecryptfs: make use of ->free_inode()
  ceph: use ->free_inode()
  btrfs: use ->free_inode()
  afs: switch to use of ->free_inode()
  dax: make use of ->free_inode()
  ntfs: switch to ->free_inode()
  securityfs: switch to ->free_inode()
  apparmor: switch to ->free_inode()
  rpcpipe: switch to ->free_inode()
  bpf: switch to ->free_inode()
  mqueue: switch to ->free_inode()
  ufs: switch to ->free_inode()
  coda: switch to ->free_inode()
  ...
2019-05-07 10:57:05 -07:00
Linus Torvalds 81ff5d2cba Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "API:
   - Add support for AEAD in simd
   - Add fuzz testing to testmgr
   - Add panic_on_fail module parameter to testmgr
   - Use per-CPU struct instead multiple variables in scompress
   - Change verify API for akcipher

  Algorithms:
   - Convert x86 AEAD algorithms over to simd
   - Forbid 2-key 3DES in FIPS mode
   - Add EC-RDSA (GOST 34.10) algorithm

  Drivers:
   - Set output IV with ctr-aes in crypto4xx
   - Set output IV in rockchip
   - Fix potential length overflow with hashing in sun4i-ss
   - Fix computation error with ctr in vmx
   - Add SM4 protected keys support in ccree
   - Remove long-broken mxc-scc driver
   - Add rfc4106(gcm(aes)) cipher support in cavium/nitrox"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits)
  crypto: ccree - use a proper le32 type for le32 val
  crypto: ccree - remove set but not used variable 'du_size'
  crypto: ccree - Make cc_sec_disable static
  crypto: ccree - fix spelling mistake "protedcted" -> "protected"
  crypto: caam/qi2 - generate hash keys in-place
  crypto: caam/qi2 - fix DMA mapping of stack memory
  crypto: caam/qi2 - fix zero-length buffer DMA mapping
  crypto: stm32/cryp - update to return iv_out
  crypto: stm32/cryp - remove request mutex protection
  crypto: stm32/cryp - add weak key check for DES
  crypto: atmel - remove set but not used variable 'alg_name'
  crypto: picoxcell - Use dev_get_drvdata()
  crypto: crypto4xx - get rid of redundant using_sd variable
  crypto: crypto4xx - use sync skcipher for fallback
  crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues
  crypto: crypto4xx - fix ctr-aes missing output IV
  crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA
  crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o
  crypto: ccree - handle tee fips error during power management resume
  crypto: ccree - add function to handle cryptocell tee fips error
  ...
2019-05-06 20:15:06 -07:00
Theodore Ts'o db90f41916 ext4: export /sys/fs/ext4/feature/casefold if Unicode support is present
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-05-06 14:03:52 -04:00
Al Viro 94053139d4 ext4: make use of ->free_inode()
the rest of this ->destroy_inode() instance could probably be folded
into ext4_evict_inode()

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-01 22:43:26 -04:00
Debabrata Banerjee 50b29d8f03 ext4: fix ext4_show_options for file systems w/o journal
Instead of removing EXT4_MOUNT_JOURNAL_CHECKSUM from s_def_mount_opt as
I assume was intended, all other options were blown away leading to
_ext4_show_options() output being incorrect.

Fixes: 1e381f60da ("ext4: do not allow journal_opts for fs w/o journal")
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
2019-04-30 23:08:15 -04:00
Christoph Hellwig 2b070cfe58 block: remove the i argument to bio_for_each_segment_all
We only have two callers that need the integer loop iterator, and they
can easily maintain it themselves.

Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30 09:26:13 -06:00
Gabriel Krisman Bertazi b886ee3e77 ext4: Support case-insensitive file name lookups
This patch implements the actual support for case-insensitive file name
lookups in ext4, based on the feature bit and the encoding stored in the
superblock.

A filesystem that has the casefold feature set is able to configure
directories with the +F (EXT4_CASEFOLD_FL) attribute, enabling lookups
to succeed in that directory in a case-insensitive fashion, i.e: match
a directory entry even if the name used by userspace is not a byte per
byte match with the disk name, but is an equivalent case-insensitive
version of the Unicode string.  This operation is called a
case-insensitive file name lookup.

The feature is configured as an inode attribute applied to directories
and inherited by its children.  This attribute can only be enabled on
empty directories for filesystems that support the encoding feature,
thus preventing collision of file names that only differ by case.

* dcache handling:

For a +F directory, Ext4 only stores the first equivalent name dentry
used in the dcache. This is done to prevent unintentional duplication of
dentries in the dcache, while also allowing the VFS code to quickly find
the right entry in the cache despite which equivalent string was used in
a previous lookup, without having to resort to ->lookup().

d_hash() of casefolded directories is implemented as the hash of the
casefolded string, such that we always have a well-known bucket for all
the equivalencies of the same string. d_compare() uses the
utf8_strncasecmp() infrastructure, which handles the comparison of
equivalent, same case, names as well.

For now, negative lookups are not inserted in the dcache, since they
would need to be invalidated anyway, because we can't trust missing file
dentries.  This is bad for performance but requires some leveraging of
the vfs layer to fix.  We can live without that for now, and so does
everyone else.

* on-disk data:

Despite using a specific version of the name as the internal
representation within the dcache, the name stored and fetched from the
disk is a byte-per-byte match with what the user requested, making this
implementation 'name-preserving'. i.e. no actual information is lost
when writing to storage.

DX is supported by modifying the hashes used in +F directories to make
them case/encoding-aware.  The new disk hashes are calculated as the
hash of the full casefolded string, instead of the string directly.
This allows us to efficiently search for file names in the htree without
requiring the user to provide an exact name.

* Dealing with invalid sequences:

By default, when a invalid UTF-8 sequence is identified, ext4 will treat
it as an opaque byte sequence, ignoring the encoding and reverting to
the old behavior for that unique file.  This means that case-insensitive
file name lookup will not work only for that file.  An optional bit can
be set in the superblock telling the filesystem code and userspace tools
to enforce the encoding.  When that optional bit is set, any attempt to
create a file name using an invalid UTF-8 sequence will fail and return
an error to userspace.

* Normalization algorithm:

The UTF-8 algorithms used to compare strings in ext4 is implemented
lives in fs/unicode, and is based on a previous version developed by
SGI.  It implements the Canonical decomposition (NFD) algorithm
described by the Unicode specification 12.1, or higher, combined with
the elimination of ignorable code points (NFDi) and full
case-folding (CF) as documented in fs/unicode/utf8_norm.c.

NFD seems to be the best normalization method for EXT4 because:

  - It has a lower cost than NFC/NFKC (which requires
    decomposing to NFD as an intermediary step)
  - It doesn't eliminate important semantic meaning like
    compatibility decompositions.

Although:

  - This implementation is not completely linguistic accurate, because
  different languages have conflicting rules, which would require the
  specialization of the filesystem to a given locale, which brings all
  sorts of problems for removable media and for users who use more than
  one language.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-25 14:12:08 -04:00
Gabriel Krisman Bertazi c83ad55eaa ext4: include charset encoding information in the superblock
Support for encoding is considered an incompatible feature, since it has
potential to create collisions of file names in existing filesystems.
If the feature flag is not enabled, the entire filesystem will operate
on opaque byte sequences, respecting the original behavior.

The s_encoding field stores a magic number indicating the encoding
format and version used globally by file and directory names in the
filesystem.  The s_encoding_flags defines policies for using the charset
encoding, like how to handle invalid sequences.  The magic number is
mapped to the exact charset table, but the mapping is specific to ext4.
Since we don't have any commitment to support old encodings, the only
encoding I am supporting right now is utf8-12.1.0.

The current implementation prevents the user from enabling encoding and
per-directory encryption on the same filesystem at the same time.  The
incompatibility between these features lies in how we do efficient
directory searches when we cannot be sure the encryption of the user
provided fname will match the actual hash stored in the disk without
decrypting every directory entry, because of normalization cases.  My
quickest solution is to simply block the concurrent use of these
features for now, and enable it later, once we have a better solution.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-25 14:05:42 -04:00
Kirill Tkhai 310a997fd7 ext4: actually request zeroing of inode table after grow
It is never possible, that number of block groups decreases,
since only online grow is supported.

But after a growing occured, we have to zero inode tables
for just created new block groups.

Fixes: 19c5246d25 ("ext4: add new online resize interface")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
2019-04-25 13:06:18 -04:00
Khazhismel Kumykov 4b99faa23c ext4: cond_resched in work-heavy group loops
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2019-04-25 12:58:01 -04:00
Barret Rhoden 7bc04c5c2c ext4: fix use-after-free race with debug_want_extra_isize
When remounting with debug_want_extra_isize, we were not performing the
same checks that we do during a normal mount.  That allowed us to set a
value for s_want_extra_isize that reached outside the s_inode_size.

Fixes: e2b911c535 ("ext4: clean up feature test macros with predicate functions")
Reported-by: syzbot+f584efa0ac7213c226b7@syzkaller.appspotmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2019-04-25 11:55:50 -04:00
Pan Bian 8c380ab4b7 ext4: avoid drop reference to iloc.bh twice
The reference to iloc.bh has been dropped in ext4_mark_iloc_dirty.
However, the reference is dropped again if error occurs during
ext4_handle_dirty_metadata, which may result in use-after-free bugs.

Fixes: fb265c9cb49e("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
2019-04-25 11:44:15 -04:00
Eric Biggers 877b5691f2 crypto: shash - remove shash_desc::flags
The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.

With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP.  These would all need to be fixed if any shash algorithm
actually started sleeping.  For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API.  However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.

Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk.  It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.

Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-25 15:38:12 +08:00
Eric Biggers 2c58d548f5 fscrypt: cache decrypted symlink target in ->i_link
Path lookups that traverse encrypted symlink(s) are very slow because
each encrypted symlink needs to be decrypted each time it's followed.
This also involves dropping out of rcu-walk mode.

Make encrypted symlinks faster by caching the decrypted symlink target
in ->i_link.  The first call to fscrypt_get_symlink() sets it.  Then,
the existing VFS path lookup code uses the non-NULL ->i_link to take the
fast path where ->get_link() isn't called, and lookups in rcu-walk mode
remain in rcu-walk mode.

Also set ->i_link immediately when a new encrypted symlink is created.

To safely free the symlink target after an RCU grace period has elapsed,
introduce a new function fscrypt_free_inode(), and make the relevant
filesystems call it just before actually freeing the inode.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-17 12:43:29 -04:00
Eric Biggers b01531db6c fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext
->lookup() in an encrypted directory begins as follows:

1. fscrypt_prepare_lookup():
    a. Try to load the directory's encryption key.
    b. If the key is unavailable, mark the dentry as a ciphertext name
       via d_flags.
2. fscrypt_setup_filename():
    a. Try to load the directory's encryption key.
    b. If the key is available, encrypt the name (treated as a plaintext
       name) to get the on-disk name.  Otherwise decode the name
       (treated as a ciphertext name) to get the on-disk name.

But if the key is concurrently added, it may be found at (2a) but not at
(1a).  In this case, the dentry will be wrongly marked as a ciphertext
name even though it was actually treated as plaintext.

This will cause the dentry to be wrongly invalidated on the next lookup,
potentially causing problems.  For example, if the racy ->lookup() was
part of sys_mount(), then the new mount will be detached when anything
tries to access it.  This is despite the mountpoint having a plaintext
path, which should remain valid now that the key was added.

Of course, this is only possible if there's a userspace race.  Still,
the additional kernel-side race is confusing and unexpected.

Close the kernel-side race by changing fscrypt_prepare_lookup() to also
set the on-disk filename (step 2b), consistent with the d_flags update.

Fixes: 28b4c26396 ("ext4 crypto: revalidate dentry after adding or removing the key")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-17 10:07:51 -04:00
Eric Biggers cd0265fcd2 fscrypt: drop inode argument from fscrypt_get_ctx()
The only reason the inode is being passed to fscrypt_get_ctx() is to
verify that the encryption key is available.  However, all callers
already ensure this because if we get as far as trying to do I/O to an
encrypted file without the key, there's already a bug.

Therefore, remove this unnecessary argument.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-16 18:37:25 -04:00
Theodore Ts'o e5d01196c0 ext4: ignore e_value_offs for xattrs with value-in-ea-inode
In other places in fs/ext4/xattr.c, if e_value_inum is non-zero, the
code ignores the value in e_value_offs.  The e_value_offs *should* be
zero, but we shouldn't depend upon it, since it might not be true in a
corrupted/fuzzed file system.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202897
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202877
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2019-04-10 00:37:36 -04:00
Theodore Ts'o 345c0dbf3a ext4: protect journal inode's blocks using block_validity
Add the blocks which belong to the journal inode to block_validity's
system zone so attempts to deallocate or overwrite the journal due a
corrupted file system where the journal blocks are also claimed by
another inode.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202879
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2019-04-09 23:37:08 -04:00
Arnd Bergmann 1e83bc8156 ext4: use BUG() instead of BUG_ON(1)
BUG_ON(1) leads to bogus warnings from clang when
CONFIG_PROFILE_ANNOTATED_BRANCHES is set:

 fs/ext4/inode.c:544:4: error: variable 'retval' is used uninitialized whenever 'if' condition is false
      [-Werror,-Wsometimes-uninitialized]
                        BUG_ON(1);
                        ^~~~~~~~~
 include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON'
                                   ^~~~~~~~~~~~~~~~~~~
 include/linux/compiler.h:48:23: note: expanded from macro 'unlikely'
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 fs/ext4/inode.c:591:6: note: uninitialized use occurs here
        if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) {
            ^~~~~~
 fs/ext4/inode.c:544:4: note: remove the 'if' if its condition is always true
                        BUG_ON(1);
                        ^
 include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON'
                               ^
 fs/ext4/inode.c:502:12: note: initialize the variable 'retval' to silence this warning

Change it to BUG() so clang can see that this code path can never
continue.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2019-04-07 12:24:43 -04:00
Liu Xiang d454a27384 ext4: fix prefetchw of NULL page
In ext4_mpage_readpages(), if the parameter pages is not NULL, another
parameter page is NULL. At the first time prefetchw(&page->flags)
works on NULL. From second time, prefetchw(&page->flags) always works on
the last consumed page. This might do little improvment for handling
current page. So prefetchw() should be called while the page pointer
has just been updated.

Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-07 11:54:27 -04:00
Eric Biggers fe53cbc5a3 ext4: remove incorrect comment for NEXT_ORPHAN()
The comment above NEXT_ORPHAN() was meant for ext4_encrypted_inode(),
which was moved by commit a7550b30ab ("ext4 crypto: migrate into vfs's
crypto engine") but the comment was accidentally left in place.  Since
ext4_encrypted_inode() has now been removed, just remove the comment.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2019-04-06 18:53:05 -04:00
Jan Kara 31562b954b ext4: make sanity check in mballoc more strict
The sanity check in mb_find_extent() only checked that returned extent
does not extend past blocksize * 8, however it should not extend past
EXT4_CLUSTERS_PER_GROUP(sb). This can happen when clusters_per_group <
blocksize * 8 and the tail of the bitmap is not properly filled by 1s
which happened e.g. when ancient kernels have grown the filesystem.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2019-04-06 18:33:06 -04:00
Christoph Hellwig 72deb455b5 block: remove CONFIG_LBDAF
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit
architectures.  These types are required to support block device and/or
file sizes larger than 2 TiB, and have generally defaulted to on for
a long time.  Enabling the option only increases the i386 tinyconfig
size by 145 bytes, and many data structures already always use
64-bit values for their in-core and on-disk data structures anyway,
so there should not be a large change in dynamic memory usage either.

Dropping this option removes a somewhat weird non-default config that
has cause various bugs or compiler warnings when actually used.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06 10:48:35 -06:00
Linus Torvalds 17403fa277 Miscellaneous ext4 bug fixes for 5.1.
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlyX1hcACgkQ8vlZVpUN
 gaOkAAf8Cx3fIkMhBQ6iZABkE8om8LCw0cd1eBi06ode9mV/GQK3mSWrfTmaPzPn
 3OysYuBUmKSB4Bbzq8pty6yujlUOhTVFIL+wL3GCbRfYhS2a4u9hCJ5jyVsXCo+M
 IPIxGlgnDiYEppj3Ok3r6HgijSzLRw1jIgSCLW5N22aYikpTETWekFDNMoAHraYF
 ew6VRATCMhqa5CTWjEl+v9dnQ13jPzcWSW8BiHQCHBMV98NFciszPlnBHH45PUzF
 90ktCxYySopfpaegECAsRp5TgvfK32ZnxlbcRgTjaj5P7u+KkGOPp7DGLiyS3Ih7
 fK/MFaWytT7/IVOGlC07rpmYq7T2ww==
 =9gOf
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes for 5.1"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: prohibit fstrim in norecovery mode
  ext4: cleanup bh release code in ext4_ind_remove_space()
  ext4: brelse all indirect buffer in ext4_ind_remove_space()
  ext4: report real fs size after failed resize
  ext4: add missing brelse() in add_new_gdb_meta_bg()
  ext4: remove useless ext4_pin_inode()
  ext4: avoid panic during forced reboot
  ext4: fix data corruption caused by unaligned direct AIO
  ext4: fix NULL pointer dereference while journal is aborted
2019-03-24 13:41:37 -07:00
Darrick J. Wong 18915b5873 ext4: prohibit fstrim in norecovery mode
The ext4 fstrim implementation uses the block bitmaps to find free space
that can be discarded.  If we haven't replayed the journal, the bitmaps
will be stale and we absolutely *cannot* use stale metadata to zap the
underlying storage.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-23 12:10:29 -04:00
zhangyi (F) 5e86bdda41 ext4: cleanup bh release code in ext4_ind_remove_space()
Currently, we are releasing the indirect buffer where we are done with
it in ext4_ind_remove_space(), so we can see the brelse() and
BUFFER_TRACE() everywhere.  It seems fragile and hard to read, and we
may probably forget to release the buffer some day.  This patch cleans
up the code by putting of the code which releases the buffers to the
end of the function.

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2019-03-23 11:56:01 -04:00
zhangyi (F) 674a2b2723 ext4: brelse all indirect buffer in ext4_ind_remove_space()
All indirect buffers get by ext4_find_shared() should be released no
mater the branch should be freed or not. But now, we forget to release
the lower depth indirect buffers when removing space from the same
higher depth indirect block. It will lead to buffer leak and futher
more, it may lead to quota information corruption when using old quota,
consider the following case.

 - Create and mount an empty ext4 filesystem without extent and quota
   features,
 - quotacheck and enable the user & group quota,
 - Create some files and write some data to them, and then punch hole
   to some files of them, it may trigger the buffer leak problem
   mentioned above.
 - Disable quota and run quotacheck again, it will create two new
   aquota files and write the checked quota information to them, which
   probably may reuse the freed indirect block(the buffer and page
   cache was not freed) as data block.
 - Enable quota again, it will invoke
   vfs_load_quota_inode()->invalidate_bdev() to try to clean unused
   buffers and pagecache. Unfortunately, because of the buffer of quota
   data block is still referenced, quota code cannot read the up to date
   quota info from the device and lead to quota information corruption.

This problem can be reproduced by xfstests generic/231 on ext3 file
system or ext4 file system without extent and quota features.

This patch fix this problem by releasing the missing indirect buffers,
in ext4_ind_remove_space().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
2019-03-23 11:43:05 -04:00
Lukas Czerner 6c7328400e ext4: report real fs size after failed resize
Currently when the file system resize using ext4_resize_fs() fails it
will report into log that "resized filesystem to <requested block
count>".  However this may not be true in the case of failure.  Use the
current block count as returned by ext4_blocks_count() to report the
block count.

Additionally, report a warning that "error occurred during file system
resize"

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-15 00:22:28 -04:00
Lukas Czerner d64264d621 ext4: add missing brelse() in add_new_gdb_meta_bg()
Currently in add_new_gdb_meta_bg() there is a missing brelse of gdb_bh
in case ext4_journal_get_write_access() fails.
Additionally kvfree() is missing in the same error path. Fix it by
moving the ext4_journal_get_write_access() before the ext4 sb update as
Ted suggested and release n_group_desc and gdb_bh in case it fails.

Fixes: 61a9c11e5e ("ext4: add missing brelse() add_new_gdb_meta_bg()'s error path")
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-15 00:15:32 -04:00
Jason Yan 7cf7714077 ext4: remove useless ext4_pin_inode()
This function is never used from the beginning (and is commented out);
let's remove it.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-14 23:51:13 -04:00
Jan Kara 1dc1097ff6 ext4: avoid panic during forced reboot
When admin calls "reboot -f" - i.e., does a hard system reboot by
directly calling reboot(2) - ext4 filesystem mounted with errors=panic
can panic the system. This happens because the underlying device gets
disabled without unmounting the filesystem and thus some syscall running
in parallel to reboot(2) can result in the filesystem getting IO errors.

This is somewhat surprising to the users so try improve the behavior by
switching to errors=remount-ro behavior when the system is running
reboot(2).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-14 23:46:05 -04:00
Lukas Czerner 372a03e018 ext4: fix data corruption caused by unaligned direct AIO
Ext4 needs to serialize unaligned direct AIO because the zeroing of
partial blocks of two competing unaligned AIOs can result in data
corruption.

However it decides not to serialize if the potentially unaligned aio is
past i_size with the rationale that no pending writes are possible past
i_size. Unfortunately if the i_size is not block aligned and the second
unaligned write lands past i_size, but still into the same block, it has
the potential of corrupting the previous unaligned write to the same
block.

This is (very simplified) reproducer from Frank

    // 41472 = (10 * 4096) + 512
    // 37376 = 41472 - 4096

    ftruncate(fd, 41472);
    io_prep_pwrite(iocbs[0], fd, buf[0], 4096, 37376);
    io_prep_pwrite(iocbs[1], fd, buf[1], 4096, 41472);

    io_submit(io_ctx, 1, &iocbs[1]);
    io_submit(io_ctx, 1, &iocbs[2]);

    io_getevents(io_ctx, 2, 2, events, NULL);

Without this patch the 512B range from 40960 up to the start of the
second unaligned write (41472) is going to be zeroed overwriting the data
written by the first write. This is a data corruption.

00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
*
00009200  30 30 30 30 30 30 30 30  30 30 30 30 30 30 30 30
*
0000a000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
*
0000a200  31 31 31 31 31 31 31 31  31 31 31 31 31 31 31 31

With this patch the data corruption is avoided because we will recognize
the unaligned_aio and wait for the unwritten extent conversion.

00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
*
00009200  30 30 30 30 30 30 30 30  30 30 30 30 30 30 30 30
*
0000a200  31 31 31 31 31 31 31 31  31 31 31 31 31 31 31 31
*
0000b200

Reported-by: Frank Sorenson <fsorenso@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: e9e3bcecf4 ("ext4: serialize unaligned asynchronous DIO")
Cc: stable@vger.kernel.org
2019-03-14 23:20:25 -04:00
Jiufei Xue fa30dde38a ext4: fix NULL pointer dereference while journal is aborted
We see the following NULL pointer dereference while running xfstests
generic/475:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 8000000c84bad067 P4D 8000000c84bad067 PUD c84e62067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 7 PID: 9886 Comm: fsstress Kdump: loaded Not tainted 5.0.0-rc8 #10
RIP: 0010:ext4_do_update_inode+0x4ec/0x760
...
Call Trace:
? jbd2_journal_get_write_access+0x42/0x50
? __ext4_journal_get_write_access+0x2c/0x70
? ext4_truncate+0x186/0x3f0
ext4_mark_iloc_dirty+0x61/0x80
ext4_mark_inode_dirty+0x62/0x1b0
ext4_truncate+0x186/0x3f0
? unmap_mapping_pages+0x56/0x100
ext4_setattr+0x817/0x8b0
notify_change+0x1df/0x430
do_truncate+0x5e/0x90
? generic_permission+0x12b/0x1a0

This is triggered because the NULL pointer handle->h_transaction was
dereferenced in function ext4_update_inode_fsync_trans().
I found that the h_transaction was set to NULL in jbd2__journal_restart
but failed to attached to a new transaction while the journal is aborted.

Fix this by checking the handle before updating the inode.

Fixes: b436b9bef8 ("ext4: Wait for proper transaction commit on fsync")
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: stable@kernel.org
2019-03-14 23:19:22 -04:00
Linus Torvalds a5adcfcad5 A large number of bug fixes and cleanups. One new feature to allow
users to more easily find the jbd2 journal thread for a particular
 ext4 file system.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlx8utQACgkQ8vlZVpUN
 gaOMOQf+Olp6hTbCuPJNill7npEejkPu9VhNvLPp3dLPBfsyqG9IOZmUaKKtr3LS
 ZYYzMMoIlbHDsWM70O92zDS3s1ThKRFoDdcw4YKXkn1Awlqc4LRZ/NnzyIIdA3mK
 rhOvcr6ttWk2B2S67nGceTH08SX5zACMtMiQijP58+GCp4Xe+PdqPRRjYYJSOZMv
 xCS43LoWY0tkeBTQuk9WYTi6G/E1X/aiq06pYiQzP69PotN6/cFSdNgP1r+7dYiS
 V4IXPqEqFt8NvUZb1bJchT3+2zM3Xi/+n//7yLkpY7OhX6p1p24oB7abMstp3ssU
 BlF8KP4elQcI892QX2Hf+0r4tBu+0w==
 =2yLu
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "A large number of bug fixes and cleanups.

  One new feature to allow users to more easily find the jbd2 journal
  thread for a particular ext4 file system"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
  jbd2: jbd2_get_transaction does not need to return a value
  jbd2: fix invalid descriptor block checksum
  ext4: fix bigalloc cluster freeing when hole punching under load
  ext4: add sysfs attr /sys/fs/ext4/<disk>/journal_task
  ext4: Change debugging support help prefix from EXT4 to Ext4
  ext4: fix compile error when using BUFFER_TRACE
  jbd2: fix compile warning when using JBUFFER_TRACE
  ext4: fix some error pointer dereferences
  ext4: annotate more implicit fall throughs
  ext4: annotate implicit fall throughs
  ext4: don't update s_rev_level if not required
  jbd2: fold jbd2_superblock_csum_{verify,set} into their callers
  jbd2: fix race when writing superblock
  ext4: fix crash during online resizing
  ext4: disallow files with EXT4_JOURNAL_DATA_FL from EXT4_IOC_SWAP_BOOT
  ext4: add mask of ext4 flags to swap
  ext4: update quota information while swapping boot loader inode
  ext4: cleanup pagecache before swap i_data
  ext4: fix check of inode in swap_inode_boot_loader
  ext4: unlock unused_pages timely when doing writeback
  ...
2019-03-12 15:03:21 -07:00
Linus Torvalds d1cae94871 fscrypt updates for v5.1
First: Ted, Jaegeuk, and I have decided to add me as a co-maintainer for
 fscrypt, and we're now using a shared git tree.  So we've updated
 MAINTAINERS accordingly, and I'm doing the pull request this time.
 
 The actual changes for v5.1 are:
 
 - Remove the fs-specific kconfig options like CONFIG_EXT4_ENCRYPTION and
   make fscrypt support for all fscrypt-capable filesystems be controlled
   by CONFIG_FS_ENCRYPTION, similar to how CONFIG_QUOTA works.
 
 - Improve error code for rename() and link() into encrypted directories.
 
 - Various cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXH2YDRQcZWJpZ2dlcnNA
 Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK+SAAQCWYOTwYko8uE8Ze8i2fiUm0vr91NOg
 zj5DGmK7Izxy/gEAsNDOVA7zWrDg/f5600/7aLpDQQTGHA38YVsgiyd7DgY=
 =S3tT
 -----END PGP SIGNATURE-----

Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt

Pull fscrypt updates from Eric Biggers:
 "First: Ted, Jaegeuk, and I have decided to add me as a co-maintainer
  for fscrypt, and we're now using a shared git tree. So we've updated
  MAINTAINERS accordingly, and I'm doing the pull request this time.

  The actual changes for v5.1 are:

   - Remove the fs-specific kconfig options like CONFIG_EXT4_ENCRYPTION
     and make fscrypt support for all fscrypt-capable filesystems be
     controlled by CONFIG_FS_ENCRYPTION, similar to how CONFIG_QUOTA
     works.

   - Improve error code for rename() and link() into encrypted
     directories.

   - Various cleanups"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  MAINTAINERS: add Eric Biggers as an fscrypt maintainer
  fscrypt: return -EXDEV for incompatible rename or link into encrypted dir
  fscrypt: remove filesystem specific build config option
  f2fs: use IS_ENCRYPTED() to check encryption status
  ext4: use IS_ENCRYPTED() to check encryption status
  fscrypt: remove CRYPTO_CTR dependency
2019-03-09 10:54:24 -08:00
Linus Torvalds 80201fe175 for-5.1/block-20190302
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlx63XIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpp2vEACfrrQsap7R+Av28mmXpmXi2FPa3g5Tev1t
 yYjK2qHvhlMZjPTYw3hCmbYdDDczlF7PEgSE2x2DjdcsYapb8Fy1lZ2X16c7ztBR
 HD/t9b5AVSQsczZzKgv3RqsNtTnjzS5V0A8XH8FAP2QRgiwDMwSN6G0FP0JBLbE/
 ZgxQrH1Iy1F33Wz4hI3Z7dEghKPZrH1IlegkZCEu47q9SlWS76qUetSy2GEtchOl
 3Lgu54mQZyVdI5/QZf9DyMDLF6dIz3tYU2qhuo01AHjGRCC72v86p8sIiXcUr94Q
 8pbegJhJ/g8KBol9Qhv3+pWG/QUAZwi/ZwasTkK+MJ4klRXfOrznxPubW1z6t9Vn
 QRo39Po5SqqP0QWAscDxCFjESIQlWlKa+LZurJL7DJDCUGrSgzTpnVwFqKwc5zTP
 HJa5MT2tEeL2TfUYRYCfh0ZV0elINdHA1y1klDBh38drh4EWr2gW8xdseGYXqRjh
 fLgEpoF7VQ8kTvxKN+E4jZXkcZmoLmefp0ZyAbblS6IawpPVC7kXM9Fdn2OU8f2c
 fjVjvSiqxfeN6dnpfeLDRbbN9894HwgP/LPropJOQ7KmjCorQq5zMDkAvoh3tElq
 qwluRqdBJpWT/F05KweY+XVW8OawIycmUWqt6JrVNoIDAK31auHQv47kR0VA4OvE
 DRVVhYpocw==
 =VBaU
 -----END PGP SIGNATURE-----

Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block

Pull block layer updates from Jens Axboe:
 "Not a huge amount of changes in this round, the biggest one is that we
  finally have Mings multi-page bvec support merged. Apart from that,
  this pull request contains:

   - Small series that avoids quiescing the queue for sysfs changes that
     match what we currently have (Aleksei)

   - Series of bcache fixes (via Coly)

   - Series of lightnvm fixes (via Mathias)

   - NVMe pull request from Christoph. Nothing major, just SPDX/license
     cleanups, RR mp policy (Hannes), and little fixes (Bart,
     Chaitanya).

   - BFQ series (Paolo)

   - Save blk-mq cpu -> hw queue mapping, removing a pointer indirection
     for the fast path (Jianchao)

   - fops->iopoll() added for async IO polling, this is a feature that
     the upcoming io_uring interface will use (Christoph, me)

   - Partition scan loop fixes (Dongli)

   - mtip32xx conversion from managed resource API (Christoph)

   - cdrom registration race fix (Guenter)

   - MD pull from Song, two minor fixes.

   - Various documentation fixes (Marcos)

   - Multi-page bvec feature. This brings a lot of nice improvements
     with it, like more efficient splitting, larger IOs can be supported
     without growing the bvec table size, and so on. (Ming)

   - Various little fixes to core and drivers"

* tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits)
  block: fix updating bio's front segment size
  block: Replace function name in string with __func__
  nbd: propagate genlmsg_reply return code
  floppy: remove set but not used variable 'q'
  null_blk: fix checking for REQ_FUA
  block: fix NULL pointer dereference in register_disk
  fs: fix guard_bio_eod to check for real EOD errors
  blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
  block: optimize bvec iteration in bvec_iter_advance
  block: introduce mp_bvec_for_each_page() for iterating over page
  block: optimize blk_bio_segment_split for single-page bvec
  block: optimize __blk_segment_map_sg() for single-page bvec
  block: introduce bvec_nth_page()
  iomap: wire up the iopoll method
  block: add bio_set_polled() helper
  block: wire up block device iopoll method
  fs: add an iopoll method to struct file_operations
  loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
  loop: do not print warn message if partition scan is successful
  block: bounce: make sure that bvec table is updated
  ...
2019-03-08 14:12:17 -08:00
Eric Whitney 7bd75230b4 ext4: fix bigalloc cluster freeing when hole punching under load
Ext4 may not free clusters correctly when punching holes in bigalloc
file systems under high load conditions.  If it's not possible to
extend and restart the journal in ext4_ext_rm_leaf() when preparing to
remove blocks from a punched region, a retry of the entire punch
operation is triggered in ext4_ext_remove_space().  This causes a
partial cluster to be set to the first cluster in the extent found to
the right of the punched region.  However, if the punch operation
prior to the retry had made enough progress to delete one or more
extents and a partial cluster candidate for freeing had already been
recorded, the retry would overwrite the partial cluster.  The loss of
this information makes it impossible to correctly free the original
partial cluster in all cases.

This bug can cause generic/476 to fail when run as part of
xfstests-bld's bigalloc and bigalloc_1k test cases.  The failure is
reported when e2fsck detects bad iblocks counts greater than expected
in units of whole clusters and also detects a number of negative block
bitmap differences equal to the iblocks discrepancy in cluster units.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-02-28 23:34:11 -05:00
Konstantin Khlebnikov bc1d69d615 ext4: add sysfs attr /sys/fs/ext4/<disk>/journal_task
This is useful for moving journal thread into cgroup or
for tracing it with ftrace/perf/blktrace.

For now the only way is `pgrep jbd2/$DISK` but this is not reliable:
name may be longer than "comm" limit and any task could mock it.

Attribute shows pid in current pid-namespace or 0 if task is unreachable.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-02-21 11:49:27 -05:00
Geert Uytterhoeven 231fe82b56 ext4: Change debugging support help prefix from EXT4 to Ext4
All other configuration options for the ext* family of file systems use
"Ext%u" instead of "EXT%u".

Fixes: 6ba495e925 ("ext4: Add configurable run-time mballoc debugging")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-02-21 11:37:28 -05:00
zhangyi (F) ddccb6dbe7 ext4: fix compile error when using BUFFER_TRACE
Fix compile error below when using BUFFER_TRACE.

fs/ext4/inode.c: In function ‘ext4_expand_extra_isize’:
fs/ext4/inode.c:5979:19: error: request for member ‘bh’ in something not a structure or union
  BUFFER_TRACE(iloc.bh, "get_write_access");

Fixes: c03b45b853 ("ext4, project: expand inode extra size if possible")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2019-02-21 11:29:10 -05:00
Dan Carpenter 7159a986b4 ext4: fix some error pointer dereferences
We can't pass error pointers to brelse().

Fixes: fb265c9cb4 ("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2019-02-21 11:17:34 -05:00
Mathieu Malaterre 793bc5181b ext4: annotate more implicit fall throughs
There is a plan to build the kernel with -Wimplicit-fallthrough and
these places in the code produced warnings (W=1). Fix them up.

This commit remove the following warnings:

  fs/ext4/indirect.c:1182:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
  fs/ext4/indirect.c:1188:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
  fs/ext4/indirect.c:1432:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
  fs/ext4/indirect.c:1440:6: warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2019-02-21 10:51:27 -05:00
Mathieu Malaterre 034f891a84 ext4: annotate implicit fall throughs
There is a plan to build the kernel with -Wimplicit-fallthrough and
these places in the code produced warnings (W=1). Fix them up.

This commit remove the following warnings:

  fs/ext4/hash.c:233:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
  fs/ext4/hash.c:246:15: warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2019-02-21 10:49:53 -05:00
Ming Lei 6dc4f100c1 block: allow bio_for_each_segment_all() to iterate over multi-page bvec
This patch introduces one extra iterator variable to bio_for_each_segment_all(),
then we can allow bio_for_each_segment_all() to iterate over multi-page bvec.

Given it is just one mechannical & simple change on all bio_for_each_segment_all()
users, this patch does tree-wide change in one single patch, so that we can
avoid to use a temporary helper for this conversion.

Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15 08:40:11 -07:00
Andreas Dilger c9e716eb9b ext4: don't update s_rev_level if not required
Don't update the superblock s_rev_level during mount if it isn't
actually necessary, only if superblock features are being set by
the kernel.  This was originally added for ext3 since it always
set the INCOMPAT_RECOVER and HAS_JOURNAL features during mount,
but this is not needed since no journal mode was added to ext4.

That will allow Geert to mount his 20-year-old ext2 rev 0.0 m68k
filesystem, as a testament of the backward compatibility of ext4.

Fixes: 0390131ba8 ("ext4: Allow ext4 to run without a journal")
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-02-14 17:52:18 -05:00
Jan Kara f96c3ac8df ext4: fix crash during online resizing
When computing maximum size of filesystem possible with given number of
group descriptor blocks, we forget to include s_first_data_block into
the number of blocks. Thus for filesystems with non-zero
s_first_data_block it can happen that computed maximum filesystem size
is actually lower than current filesystem size which confuses the code
and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on
flex_gd->count == 0. The problem can be reproduced like:

truncate -s 100g /tmp/image
mkfs.ext4 -b 1024 -E resize=262144 /tmp/image 32768
mount -t ext4 -o loop /tmp/image /mnt
resize2fs /dev/loop0 262145
resize2fs /dev/loop0 300000

Fix the problem by properly including s_first_data_block into the
computed number of filesystem blocks.

Fixes: 1c6bd7173d "ext4: convert file system to meta_bg if needed..."
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2019-02-11 13:30:32 -05:00
Theodore Ts'o 6e589291f4 ext4: disallow files with EXT4_JOURNAL_DATA_FL from EXT4_IOC_SWAP_BOOT
A malicious/clueless root user can use EXT4_IOC_SWAP_BOOT to force a
corner casew which can lead to the file system getting corrupted.
There's no usefulness to allowing this, so just prohibit this case.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-02-11 01:07:10 -05:00
yangerkun abdc644e8c ext4: add mask of ext4 flags to swap
The reason is that while swapping two inode, we swap the flags too.
Some flags such as EXT4_JOURNAL_DATA_FL can really confuse the things
since we're not resetting the address operations structure.  The
simplest way to keep things sane is to restrict the flags that can be
swapped.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2019-02-11 00:35:06 -05:00
yangerkun aa507b5faf ext4: update quota information while swapping boot loader inode
While do swap between two inode, they swap i_data without update
quota information. Also, swap_inode_boot_loader can do "revert"
somtimes, so update the quota while all operations has been finished.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2019-02-11 00:14:02 -05:00
yangerkun a46c68a318 ext4: cleanup pagecache before swap i_data
While do swap, we should make sure there has no new dirty page since we
should swap i_data between two inode:
1.We should lock i_mmap_sem with write to avoid new pagecache from mmap
read/write;
2.Change filemap_flush to filemap_write_and_wait and move them to the
space protected by inode lock to avoid new pagecache from buffer read/write.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2019-02-11 00:05:24 -05:00
yangerkun 67a11611e1 ext4: fix check of inode in swap_inode_boot_loader
Before really do swap between inode and boot inode, something need to
check to avoid invalid or not permitted operation, like does this inode
has inline data. But the condition check should be protected by inode
lock to avoid change while swapping. Also some other condition will not
change between swapping, but there has no problem to do this under inode
lock.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2019-02-11 00:02:05 -05:00
Xiaoguang Wang a297b2fcee ext4: unlock unused_pages timely when doing writeback
In mpage_add_bh_to_extent(), when accumulated extents length is greater
than MAX_WRITEPAGES_EXTENT_LEN or buffer head's b_stat is not equal, we
will not continue to search unmapped area for this page, but note this
page is locked, and will only be unlocked in mpage_release_unused_pages()
after ext4_io_submit, if io also is throttled by blk-throttle or similar
io qos, we will hold this page locked for a while, it's unnecessary.

I think the best fix is to refactor mpage_add_bh_to_extent() to let it
return some hints whether to unlock this page, but given that we will
improve dioread_nolock later, we can let it done later, so currently
the simple fix would just call mpage_release_unused_pages() before
ext4_io_submit().

Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-02-10 23:53:21 -05:00
zhangyi (F) 16e08b14a4 ext4: cleanup clean_bdev_aliases() calls
Now, we have already handle all cases of forgetting buffer in
jbd2_journal_forget(), the buffer should not be mapped to blockdevice
when reallocating it. So this patch remove all clean_bdev_aliases() and
clean_bdev_bh_alias() calls which were invoked by ext4 explicitly.

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2019-02-10 23:32:07 -05:00
Nikolay Borisov 82dd124c40 ext4: replace opencoded i_writecount usage with inode_is_open_for_write()
There is a function which clearly conveys the objective of checking
i_writecount. Additionally the usage in ext4_mb_initialize_context was
wrong, since a node would have wrongfully been reported as writable if
i_writecount had a negative value (MMAP_DENY_WRITE).

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2019-02-10 23:04:16 -05:00
Theodore Ts'o 8fdd60f2ae Revert "ext4: use ext4_write_inode() when fsyncing w/o a journal"
This reverts commit ad211f3e94.

As Jan Kara pointed out, this change was unsafe since it means we lose
the call to sync_mapping_buffers() in the nojournal case.  The
original point of the commit was avoid taking the inode mutex (since
it causes a lockdep warning in generic/113); but we need the mutex in
order to call sync_mapping_buffers().

The real fix to this problem was discussed here:

https://lore.kernel.org/lkml/20181025150540.259281-4-bvanassche@acm.org

The proposed patch was to fix a syzbot complaint, but the problem can
also demonstrated via "kvm-xfstests -c nojournal generic/113".
Multiple solutions were discused in the e-mail thread, but none have
landed in the kernel as of this writing.  Anyway, commit
ad211f3e94 is absolutely the wrong way to suppress the lockdep, so
revert it.

Fixes: ad211f3e94 ("ext4: use ext4_write_inode() when fsyncing w/o a journal")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported: Jan Kara <jack@suse.cz>
2019-01-31 23:41:11 -05:00
Chandan Rajendra 643fa9612b fscrypt: remove filesystem specific build config option
In order to have a common code base for fscrypt "post read" processing
for all filesystems which support encryption, this commit removes
filesystem specific build config option (e.g. CONFIG_EXT4_FS_ENCRYPTION)
and replaces it with a build option (i.e. CONFIG_FS_ENCRYPTION) whose
value affects all the filesystems making use of fscrypt.

Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-01-23 23:56:43 -05:00
Chandan Rajendra 592ddec757 ext4: use IS_ENCRYPTED() to check encryption status
This commit removes the ext4 specific ext4_encrypted_inode() and makes
use of the generic IS_ENCRYPTED() macro to check for the encryption
status of an inode.

Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-01-23 23:56:43 -05:00
Linus Torvalds 215240462a Fix a number of ext4 bugs.
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlwyAi0ACgkQ8vlZVpUN
 gaMtEgf9GyIJ5UnbR3J5+tpOAjx2GFJmTgpinWcfqVBrWwQDTigxiLm5sRIz5ToY
 hoWvCIxWm9LgrdS0unYOUNzRyzSZisNAtceowbPErlV5NPS9zcftVt4pRYZ6hIZK
 L3wKQ/PdVxIaekP9SXvFx5tfnHSB6CTGOJu1YMlF8ERm4tXUXHIwHzwUwrYqPYN0
 5i0uWxbx7qMlEzTf/9sEMYrmdHjsrPlXe0kIP0sMyd7hJl28l0QTNQ2s126fRNLK
 wkVMduacGuFGLwqbh7O1QrayWtcni7PKgTW9MfTsjLbg/EWx77auZBTSLfEO+ZKq
 2gxxCbM0sID5sgVaw6ku8QJkfiU2fw==
 =aQSK
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 bug fixes from Ted Ts'o:
 "Fix a number of ext4 bugs"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix special inode number checks in __ext4_iget()
  ext4: track writeback errors using the generic tracking infrastructure
  ext4: use ext4_write_inode() when fsyncing w/o a journal
  ext4: avoid kernel warning when writing the superblock to a dead device
  ext4: fix a potential fiemap/page fault deadlock w/ inline_data
  ext4: make sure enough credits are reserved for dioread_nolock writes
2019-01-06 12:19:23 -08:00
Nikolay Borisov f86196ea87 fs: don't open code lru_to_page()
Multiple filesystems open code lru_to_page().  Rectify this by moving
the macro from mm_inline (which is specific to lru stuff) to the more
generic mm.h header and start using the macro where appropriate.

No functional changes.

Link: http://lkml.kernel.org/r/20181129104810.23361-1-nborisov@suse.com
Link: https://lkml.kernel.org/r/20181129075301.29087-1-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Pankaj gupta <pagupta@redhat.com>
Acked-by: "Yan, Zheng" <zyan@redhat.com>		[ceph]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 13:13:48 -08:00
Theodore Ts'o 191ce17876 ext4: fix special inode number checks in __ext4_iget()
The check for special (reserved) inode number checks in __ext4_iget()
was broken by commit 8a363970d1dc: ("ext4: avoid declaring fs
inconsistent due to invalid file handles").  This was caused by a
botched reversal of the sense of the flag now known as
EXT4_IGET_SPECIAL (when it was previously named EXT4_IGET_NORMAL).
Fix the logic appropriately.

Fixes: 8a363970d1 ("ext4: avoid declaring fs inconsistent...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
2018-12-31 22:34:31 -05:00
Theodore Ts'o 95cb671387 ext4: track writeback errors using the generic tracking infrastructure
We already using mapping_set_error() in fs/ext4/page_io.c, so all we
need to do is to use file_check_and_advance_wb_err() when handling
fsync() requests in ext4_sync_file().

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2018-12-31 00:11:07 -05:00
Theodore Ts'o ad211f3e94 ext4: use ext4_write_inode() when fsyncing w/o a journal
In no-journal mode, we previously used __generic_file_fsync() in
no-journal mode.  This triggers a lockdep warning, and in addition,
it's not safe to depend on the inode writeback mechanism in the case
ext4.  We can solve both problems by calling ext4_write_inode()
directly.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2018-12-31 00:10:48 -05:00
Theodore Ts'o e86807862e ext4: avoid kernel warning when writing the superblock to a dead device
The xfstests generic/475 test switches the underlying device with
dm-error while running a stress test.  This results in a large number
of file system errors, and since we can't lock the buffer head when
marking the superblock dirty in the ext4_grp_locked_error() case, it's
possible the superblock to be !buffer_uptodate() without
buffer_write_io_error() being true.

We need to set buffer_uptodate() before we call mark_buffer_dirty() or
this will trigger a WARN_ON.  It's safe to do this since the
superblock must have been properly read into memory or the mount would
have been successful.  So if buffer_uptodate() is not set, we can
safely assume that this happened due to a failed attempt to write the
superblock.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2018-12-30 23:20:39 -05:00
Linus Torvalds 0e9da3fbf7 for-4.21/block-20181221
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlwb7R8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjiID/97oDjMhNT7rwpuMbHw855h62j1hEN/m+N3
 FI0uxivYoYZLD+eJRnMcBwHlKjrCX8iJQAcv9ffI3ThtFW7dnZT3atUacaZVR/Dt
 IrxdymdBP3qsmuaId5NYBug7rJ+AiqFJKjEvCcSPu5X397J4I3SEbzhfvYLJ/aZX
 16o0HJlVVIrcbmq1IP4HwiIIOaKXvPaw04L4z4fpeynRSWG7EAi8NLSnhlR4Rxbb
 BTiMkCTsjRCFdyO6da4fvNQKWmPGPa3bJkYy3qR99cvJCeIbQjRyCloQlWNJRRgi
 3eJpCHVxqFmN0/+DNTJVQEEr4H8o0AVucrLVct1Jc4pessenkpoUniP8vELqwlng
 Z2VHLkhTfCEmvFlk82grrYdNvGATRsrbswt/PlP4T7rBfr1IpDk8kXDWF59EL2dy
 ly35Sk3wJGHBl8qa+vEPXOAnaWdqJXuVGpwB4ifOIatOls8mOxwfZjiRc7x05/fC
 1O4rR2IfLwRqwoYHs0AJ+h6ohOSn1mkGezl2Tch1VSFcJUOHmuYvraTaUi6hblpA
 SslaAoEhO39hRBL0HsvsMeqVWM9uzqvFkLDCfNPdiA81H1258CIbo4vF8z6czCIS
 eeXnTJxVhPVbZgb3a1a93SPwM6KIDZFoIijyd+NqjpU94thlnhYD0QEcKJIKH7os
 2p4aHs6ktw==
 =TRdW
 -----END PGP SIGNATURE-----

Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "This is the main pull request for block/storage for 4.21.

  Larger than usual, it was a busy round with lots of goodies queued up.
  Most notable is the removal of the old IO stack, which has been a long
  time coming. No new features for a while, everything coming in this
  week has all been fixes for things that were previously merged.

  This contains:

   - Use atomic counters instead of semaphores for mtip32xx (Arnd)

   - Cleanup of the mtip32xx request setup (Christoph)

   - Fix for circular locking dependency in loop (Jan, Tetsuo)

   - bcache (Coly, Guoju, Shenghui)
      * Optimizations for writeback caching
      * Various fixes and improvements

   - nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith)
      * host and target support for NVMe over TCP
      * Error log page support
      * Support for separate read/write/poll queues
      * Much improved polling
      * discard OOM fallback
      * Tracepoint improvements

   - lightnvm (Hans, Hua, Igor, Matias, Javier)
      * Igor added packed metadata to pblk. Now drives without metadata
        per LBA can be used as well.
      * Fix from Geert on uninitialized value on chunk metadata reads.
      * Fixes from Hans and Javier to pblk recovery and write path.
      * Fix from Hua Su to fix a race condition in the pblk recovery
        code.
      * Scan optimization added to pblk recovery from Zhoujie.
      * Small geometry cleanup from me.

   - Conversion of the last few drivers that used the legacy path to
     blk-mq (me)

   - Removal of legacy IO path in SCSI (me, Christoph)

   - Removal of legacy IO stack and schedulers (me)

   - Support for much better polling, now without interrupts at all.
     blk-mq adds support for multiple queue maps, which enables us to
     have a map per type. This in turn enables nvme to have separate
     completion queues for polling, which can then be interrupt-less.
     Also means we're ready for async polled IO, which is hopefully
     coming in the next release.

   - Killing of (now) unused block exports (Christoph)

   - Unification of the blk-rq-qos and blk-wbt wait handling (Josef)

   - Support for zoned testing with null_blk (Masato)

   - sx8 conversion to per-host tag sets (Christoph)

   - IO priority improvements (Damien)

   - mq-deadline zoned fix (Damien)

   - Ref count blkcg series (Dennis)

   - Lots of blk-mq improvements and speedups (me)

   - sbitmap scalability improvements (me)

   - Make core inflight IO accounting per-cpu (Mikulas)

   - Export timeout setting in sysfs (Weiping)

   - Cleanup the direct issue path (Jianchao)

   - Export blk-wbt internals in block debugfs for easier debugging
     (Ming)

   - Lots of other fixes and improvements"

* tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits)
  kyber: use sbitmap add_wait_queue/list_del wait helpers
  sbitmap: add helpers for add/del wait queue handling
  block: save irq state in blkg_lookup_create()
  dm: don't reuse bio for flushes
  nvme-pci: trace SQ status on completions
  nvme-rdma: implement polling queue map
  nvme-fabrics: allow user to pass in nr_poll_queues
  nvme-fabrics: allow nvmf_connect_io_queue to poll
  nvme-core: optionally poll sync commands
  block: make request_to_qc_t public
  nvme-tcp: fix spelling mistake "attepmpt" -> "attempt"
  nvme-tcp: fix endianess annotations
  nvmet-tcp: fix endianess annotations
  nvme-pci: refactor nvme_poll_irqdisable to make sparse happy
  nvme-pci: only set nr_maps to 2 if poll queues are supported
  nvmet: use a macro for default error location
  nvmet: fix comparison of a u16 with -1
  blk-mq: enable IO poll if .nr_queues of type poll > 0
  blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()
  blk-mq: skip zero-queue maps in blk_mq_map_swqueue
  ...
2018-12-28 13:19:59 -08:00
Theodore Ts'o 2b08b1f12c ext4: fix a potential fiemap/page fault deadlock w/ inline_data
The ext4_inline_data_fiemap() function calls fiemap_fill_next_extent()
while still holding the xattr semaphore.  This is not necessary and it
triggers a circular lockdep warning.  This is because
fiemap_fill_next_extent() could trigger a page fault when it writes
into page which triggers a page fault.  If that page is mmaped from
the inline file in question, this could very well result in a
deadlock.

This problem can be reproduced using generic/519 with a file system
configuration which has the inline_data feature enabled.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2018-12-25 00:56:33 -05:00
Theodore Ts'o 812c0cab2c ext4: make sure enough credits are reserved for dioread_nolock writes
There are enough credits reserved for most dioread_nolock writes;
however, if the extent tree is sufficiently deep, and/or quota is
enabled, the code was not allowing for all eventualities when
reserving journal credits for the unwritten extent conversion.

This problem can be seen using xfstests ext4/034:

   WARNING: CPU: 1 PID: 257 at fs/ext4/ext4_jbd2.c:271 __ext4_handle_dirty_metadata+0x10c/0x180
   Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work
   RIP: 0010:__ext4_handle_dirty_metadata+0x10c/0x180
   	...
   EXT4-fs: ext4_free_blocks:4938: aborting transaction: error 28 in __ext4_handle_dirty_metadata
   EXT4: jbd2_journal_dirty_metadata failed: handle type 11 started at line 4921, credits 4/0, errcode -28
   EXT4-fs error (device dm-1) in ext4_free_blocks:4950: error 28

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2018-12-24 20:27:08 -05:00
Theodore Ts'o 18f2c4fceb ext4: check for shutdown and r/o file system in ext4_write_inode()
If the file system has been shut down or is read-only, then
ext4_write_inode() needs to bail out early.

Also use jbd2_complete_transaction() instead of ext4_force_commit() so
we only force a commit if it is needed.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2018-12-19 14:36:58 -05:00
Theodore Ts'o fde872682e ext4: force inode writes when nfsd calls commit_metadata()
Some time back, nfsd switched from calling vfs_fsync() to using a new
commit_metadata() hook in export_operations().  If the file system did
not provide a commit_metadata() hook, it fell back to using
sync_inode_metadata().  Unfortunately doesn't work on all file
systems.  In particular, it doesn't work on ext4 due to how the inode
gets journalled --- the VFS writeback code will not always call
ext4_write_inode().

So we need to provide our own ext4_nfs_commit_metdata() method which
calls ext4_write_inode() directly.

Google-Bug-Id: 121195940
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2018-12-19 14:07:58 -05:00
Theodore Ts'o 8a363970d1 ext4: avoid declaring fs inconsistent due to invalid file handles
If we receive a file handle, either from NFS or open_by_handle_at(2),
and it points at an inode which has not been initialized, and the file
system has metadata checksums enabled, we shouldn't try to get the
inode, discover the checksum is invalid, and then declare the file
system as being inconsistent.

This can be reproduced by creating a test file system via "mke2fs -t
ext4 -O metadata_csum /tmp/foo.img 8M", mounting it, cd'ing into that
directory, and then running the following program.

#define _GNU_SOURCE
#include <fcntl.h>

struct handle {
	struct file_handle fh;
	unsigned char fid[MAX_HANDLE_SZ];
};

int main(int argc, char **argv)
{
	struct handle h = {{8, 1 }, { 12, }};

	open_by_handle_at(AT_FDCWD, &h.fh, O_RDONLY);
	return 0;
}

Google-Bug-Id: 120690101
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2018-12-19 12:29:13 -05:00
Theodore Ts'o a805622a75 ext4: include terminating u32 in size of xattr entries when expanding inodes
In ext4_expand_extra_isize_ea(), we calculate the total size of the
xattr header, plus the xattr entries so we know how much of the
beginning part of the xattrs to move when expanding the inode extra
size.  We need to include the terminating u32 at the end of the xattr
entries, or else if there is uninitialized, non-zero bytes after the
xattr entries and before the xattr values, the list of xattr entries
won't be properly terminated.

Reported-by: Steve Graham <stgraham2000@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2018-12-19 12:28:13 -05:00
Chengguang Xu 0a1e8258a4 ext4: compare old and new mode before setting update_mode flag
If new mode is the same as old mode we don't have to reset
inode mode in the rest of the code, so compare old and new
mode before setting update_mode flag.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-12-10 00:22:38 -05:00
Dennis Zhou fd42df305f blkcg: associate writeback bios with a blkg
One of the goals of this series is to remove a separate reference to
the css of the bio. This can and should be accessed via bio_blkcg(). In
this patch, wbc_init_bio() now requires a bio to have a device
associated with it.

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07 22:26:37 -07:00
ruippan (潘睿) e647e29196 ext4: fix EXT4_IOC_GROUP_ADD ioctl
Commit e2b911c535 ("ext4: clean up feature test macros with
predicate functions") broke the EXT4_IOC_GROUP_ADD ioctl.  This was
not noticed since only very old versions of resize2fs (before
e2fsprogs 1.42) use this ioctl.  However, using a new kernel with an
enterprise Linux userspace will cause attempts to use online resize to
fail with "No reserved GDT blocks".

Fixes: e2b911c535 ("ext4: clean up feature test macros with predicate...")
Cc: stable@kernel.org # v4.4
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: ruippan (潘睿) <ruippan@tencent.com>
2018-12-04 01:04:12 -05:00
Eric Sandeen 361d24d406 ext4: hard fail dax mount on unsupported devices
As dax inches closer to production use, an administrator should not
be surprised by silently disabling the feature they asked for.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-12-04 00:46:39 -05:00