Merge ACPI SoC drivers changes, ACPI backlight driver changes and APEI
changes for 5.18-rc1:
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
* acpi-soc:
ACPI: LPSS: Provide an SSP type to the driver
ACPI: LPSS: Constify properties member in struct lpss_device_desc
ACPI: platform: Constify properties parameter in acpi_create_platform_device()
* acpi-video:
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
* acpi-apei:
ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
ACPI/APEI: Limit printable size of BERT table data
ACPI: APEI: fix return value of __setup handlers
ACPI: APEI: rename ghes_init() with an "acpi_" prefix
ACPI: APEI: explicit init of HEST and GHES in apci_init()
If the platform firmware indicates that it does not support CPPC by
clearing the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits in the
platform _OSC capabilities mask, avoid attempting to evaluate _CPC
which may fail in that case.
Because the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits are only
added to the supported platform capabilities mask on x86, when
X86_FEATURE_HWP is supported, allow _CPC to be evaluated regardless
in the other cases.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0i=ecAksq0TV+iLVObm-=fUfdqPABzzkgm9K6KxO1ZCcg@mail.gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Revert commit 159d8c274f ("ACPI: Pass the same capabilities to the
_OSC regardless of the query flag") which caused legitimate usage
scenarios (when the platform firmware does not want the OS to control
certain platform features controlled by the system bus scope _OSC) to
break and was misguided by some misleading language in the _OSC
definition in the ACPI specification (in particular, Section 6.2.11.1.3
"Sequence of _OSC Calls" that contradicts other perts of the _OSC
definition).
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0iStA0JmO0H3z+VgQsVuQONVjKPpw0F5HKfiq=Gb6B5yw@mail.gmail.com
Reported-by: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices
Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to
issue diagnostic dump and reset via an SDEI event or an interrupt.
This patch implements SDEI path.
[0] https://developer.arm.com/documentation/den0093/latest/
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ghes_init() sticks out in acpi_init() because it is the only functions
without an "acpi_" prefix.
Rename ghes_init with an "acpi_" prefix, then all looks fine.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
From commit e147133a42 ("ACPI / APEI: Make hest.c manage the estatus
memory pool") was merged, ghes_init() relies on acpi_hest_init() to manage
the estatus memory pool. On the other hand, ghes_init() relies on
sdei_init() to detect the SDEI version and (un)register events. The
dependencies are as follows:
ghes_init() => acpi_hest_init() => acpi_bus_init() => acpi_init()
ghes_init() => sdei_init()
HEST is not PCI-specific and initcall ordering is implicit and not
well-defined within a level.
Based on above, remove acpi_hest_init() from acpi_pci_root_init() and
convert ghes_init() and sdei_init() from initcalls to explicit calls in the
following order:
acpi_hest_init()
ghes_init()
sdei_init()
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to avoid exposing acpi_bus_type to modules, introduce an
acpi_bus_for_each_dev() helper for iterating over all ACPI device
objects and make typec_link_ports() use it instead of the raw
bus_for_each_dev() along with acpi_bus_type.
Having done that, drop the acpi_bus_type export.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Here is the big set of USB and Thunderbolt driver changes for 5.17-rc1.
Nothing major in here, just lots of little updates and cleanups. These
include:
- some USB header fixes picked from Ingo's header-splitup work
- more USB4/Thunderbolt hardware support added
- USB gadget driver updates and additions
- USB typec additions (includes some acpi changes, which were
acked by the ACPI maintainer)
- core USB fixes as found by syzbot that were too late for
5.16-final
- USB dwc3 driver updates
- USB dwc2 driver updates
- platform_get_irq() conversions of some USB drivers
- other minor USB driver updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd66Tg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynH2wCfetT95966ZMICGDmdwZpEBBYCO1wAn2v9Pwd2
CeXrMLdaOr9WkV2P6mE5
=K4Jh
-----END PGP SIGNATURE-----
Merge tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.17-rc1.
Nothing major in here, just lots of little updates and cleanups. These
include:
- some USB header fixes picked from Ingo's header-splitup work
- more USB4/Thunderbolt hardware support added
- USB gadget driver updates and additions
- USB typec additions (includes some acpi changes, which were acked
by the ACPI maintainer)
- core USB fixes as found by syzbot that were too late for 5.16-final
- USB dwc3 driver updates
- USB dwc2 driver updates
- platform_get_irq() conversions of some USB drivers
- other minor USB driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits)
docs: ABI: fixed formatting in configfs-usb-gadget-uac2
usb: gadget: u_audio: Subdevice 0 for capture ctls
usb: gadget: u_audio: fix calculations for small bInterval
usb: dwc2: gadget: initialize max_speed from params
usb: dwc2: do not gate off the hardware if it does not support clock gating
usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h>
USB: common: debug: add needed kernel.h include
headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c
headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h
headers/prep: usb: gadget: Fix namespace collision
USB: core: Fix bug in resuming hub's handling of wakeup requests
USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core
usb: gadget: clear related members when goto fail
usb: gadget: don't release an existing dev->buf
usb: dwc2: Simplify a bitmap declaration
usb: Remove usb_for_each_port()
usb: typec: port-mapper: Convert to the component framework
usb: Link the ports to the connectors they are attached to
...
Merge x86-specific ACPI updates, PMIC driver ACPI updates and a DPTF
driver update for 5.17-rc1:
- Rework the handling of device enumeration quirks in the x86-specific
code and add new quirks for known-broken platforms (Hans de Goede).
- Fix the handling of defective LPAT in the ACPI xpower PMIC driver
and clean up some definitions of PMIC data structures (Hans de
Goede).
- Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).
* acpi-x86:
ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs
ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper
mmc: sdhci-acpi: Use the new soc_intel_is_byt() helper
mmc: sdhci-acpi: Remove special handling for GPD win/pocket devices
ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list
ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win
ACPI / x86: Allow specifying acpi_device_override_status() quirks by path
ACPI: Change acpi_device_always_present() into acpi_device_override_status()
ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table
* acpi-pmic:
ACPI: PMIC: xpower: Fix _TMP ACPI errors
ACPI: PMIC: allow drivers to provide a custom lpat_raw_to_temp() function
ACPI: PMIC: constify all struct intel_pmic_opregion_data declarations
* acpi-dptf:
ACPI: DPTF: Update device ID in a comment
PCC OpRegion provides a mechanism to communicate with the platform
directly from the AML. PCCT provides the list of PCC channel available
in the platform, a subset or all of them can be used in PCC Opregion.
This patch registers the PCC OpRegion handler before ACPI tables are
loaded. This relies on the special context data passed to identify and
set up the PCC channel before the OpRegion handler is executed for the
first time.
Typical PCC Opregion declaration looks like this:
OperationRegion (PFRM, PCC, 2, 0x74)
Field (PFRM, ByteAcc, NoLock, Preserve)
{
SIGN, 32,
FLGS, 32,
LEN, 32,
CMD, 32,
DATA, 800
}
It contains four named double words followed by 100 bytes of buffer
names DATA.
ASL can fill out the buffer something like:
/* Create global or local buffer */
Name (BUFF, Buffer (0x0C){})
/* Create double word fields over the buffer */
CreateDWordField (BUFF, 0x0, WD0)
CreateDWordField (BUFF, 0x04, WD1)
CreateDWordField (BUFF, 0x08, WD2)
/* Fill the named fields */
WD0 = 0x50434300
SIGN = BUFF
WD0 = 1
FLGS = BUFF
WD0 = 0x10
LEN = BUFF
/* Fill the payload in the DATA buffer */
WD0 = 0
WD1 = 0x08
WD2 = 0
DATA = BUFF
/* Write to CMD field to trigger handler */
WD0 = 0x4404
CMD = BUFF
This buffer is received by acpi_pcc_opregion_space_handler. This
handler will fetch the complete buffer via internal_pcc_buffer.
The setup handler will receive the special PCC context data which will
contain the PCC channel index which used to set up the channel. The
buffer pointer and length is saved in region context which is then used
in the handler.
(kernel test robot: Build failure with CONFIG_ACPI_DEBUGGER)
Link: https://lore.kernel.org/r/202201041539.feAV0l27-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
So we can use bus_for_each_dev() and others from modules.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223081620.45479-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, acpi_bus_get_status() calls acpi_device_always_present() to
allow platform quirks to override the _STA return to report that a
device is present (status = ACPI_STA_DEFAULT) independent of the _STA
return.
In some cases it might also be useful to have the opposite functionality
and have a platform quirk which marks a device as not present (status = 0)
to work around ACPI table bugs.
Change acpi_device_always_present() into a more generic
acpi_device_override_status() function to allow this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a name collision between acpi_device_notify() defined in
bus.c and another static function defined in glue.c.
Since the latter is going to be exported from that file, rename the
former to acpi_notify_device() and rename acpi_device_notify_fixed()
to follow the same naming pattern.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- Fix up the recently added Platform Runtime Mechanism (PRM)
support by correnting a couple of implementation mistakes in it
and adding a Kconfig help text to describe it (Aubrey Li,
Rafael Wysocki).
- Add backlight quirk for Dell Vostro 3350 (Hans de Goede).
- Avoid spurious wakeups from suspend-to-idle on non-Intel platforms
by restricting special EC GPE handling to the Intel ones (Mario
Limonciello).
- Modify the AMBA bus support in ACPI to avoid adding using
resource names in /proc/iomem (Liguang Zhang).
-----BEGIN PGP SIGNATURE-----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=PXKo
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These include fixes of the recently introduced support for the
Platform Runtime Mechanism (PRM) feature, a new backlight quirk, a
suspend-to-idle wakeup fix for non-Intel platforms and a fix for the
AMBA bus resource list in /proc/iomem.
Specifics:
- Fix up the recently added Platform Runtime Mechanism (PRM) support
by correnting a couple of implementation mistakes in it and adding
a Kconfig help text to describe it (Aubrey Li, Rafael Wysocki).
- Add backlight quirk for Dell Vostro 3350 (Hans de Goede).
- Avoid spurious wakeups from suspend-to-idle on non-Intel platforms
by restricting special EC GPE handling to the Intel ones (Mario
Limonciello).
- Modify the AMBA bus support in ACPI to avoid adding using resource
names in /proc/iomem (Liguang Zhang)"
* tag 'acpi-5.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Do not singal PRM support if not enabled
ACPI: Correct \_SB._OSC bit definition for PRM
ACPI: Kconfig: Provide help text for the ACPI_PRMT option
ACPI: PM: Only mark EC GPE for wakeup on Intel systems
ACPI: video: Add quirk for the Dell Vostro 3350
ACPI: AMBA: Fix resource name in /proc/iomem
* acpi-misc:
ACPI: AMBA: Fix resource name in /proc/iomem
* acpi-video:
ACPI: video: Add quirk for the Dell Vostro 3350
* acpi-prm:
ACPI: Do not singal PRM support if not enabled
ACPI: Correct \_SB._OSC bit definition for PRM
ACPI: Kconfig: Provide help text for the ACPI_PRMT option
Including:
- SMMU Updates from Will Deacon:
- SMMUv3: Support stalling faults for platform devices
- SMMUv3: Decrease defaults sizes for the event and PRI queues
- SMMUv2: Support for a new '->probe_finalize' hook, needed by Nvidia
- SMMUv2: Even more Qualcomm compatible strings
- SMMUv2: Avoid Adreno TTBR1 quirk for DB820C platform
- Intel VT-d updates from Lu Baolu:
- Convert Intel IOMMU to use sva_lib helpers in iommu core
- ftrace and debugfs supports for page fault handling
- Support asynchronous nested capabilities
- Various misc cleanups
- Support for new VIOT ACPI table to make the VirtIO IOMMU:
available on x86
- Add the amd_iommu=force_enable command line option to
enable the IOMMU on platforms where they are known to cause
problems
- Support for version 2 of the Rockchip IOMMU
- Various smaller fixes, cleanups and refactorings
-----BEGIN PGP SIGNATURE-----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=IxNB
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- SMMU Updates from Will Deacon:
- SMMUv3:
- Support stalling faults for platform devices
- Decrease defaults sizes for the event and PRI queues
- SMMUv2:
- Support for a new '->probe_finalize' hook, needed by Nvidia
- Even more Qualcomm compatible strings
- Avoid Adreno TTBR1 quirk for DB820C platform
- Intel VT-d updates from Lu Baolu:
- Convert Intel IOMMU to use sva_lib helpers in iommu core
- ftrace and debugfs supports for page fault handling
- Support asynchronous nested capabilities
- Various misc cleanups
- Support for new VIOT ACPI table to make the VirtIO IOMMU
available on x86
- Add the amd_iommu=force_enable command line option to enable
the IOMMU on platforms where they are known to cause problems
- Support for version 2 of the Rockchip IOMMU
- Various smaller fixes, cleanups and refactorings
* tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu/virtio: Enable x86 support
iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops()
ACPI: Add driver for the VIOT table
ACPI: Move IOMMU setup code out of IORT
ACPI: arm64: Move DMA setup operations out of IORT
iommu/vt-d: Fix dereference of pointer info before it is null checked
iommu: Update "iommu.strict" documentation
iommu/arm-smmu: Check smmu->impl pointer before dereferencing
iommu/arm-smmu-v3: Remove unnecessary oom message
iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
iommu/vt-d: Fix linker error on 32-bit
iommu/vt-d: No need to typecast
iommu/vt-d: Define counter explicitly as unsigned int
iommu/vt-d: Remove unnecessary braces
iommu/vt-d: Removed unused iommu_count in dmar domain
iommu/vt-d: Use bitfields for DMAR capabilities
iommu/vt-d: Use DEVICE_ATTR_RO macro
iommu/vt-d: Fix out-bounds-warning in intel/svm.c
iommu/vt-d: Add PRQ handling latency sampling
...
If the OS confirms PRM (Platform Runtime Mechanism) support through
the \_SB._OSC PRM bit, the BIOS may start relying on the presence of
PRM support in the OS, so prevent the PRM bit from being set in the
\_SB._OSC capabilities bitmask when PRM support is not built in so
as to avoid confusing the BIOS in that case.
Fixes: 60faa8f1ac ("ACPI: Add \_SB._OSC bit for PRM")
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
[ rjw: Rewrite subject and changelog, replace #ifdef with if (IS_ENABLED()) ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-ec:
ACPI: EC: trust DSDT GPE for certain HP laptop
ACPI: EC: Make more Asus laptops use ECDT _GPE
* acpi-apei:
ACPI: APEI: fix synchronous external aborts in user-mode
ACPI: APEI: Don't warn if ACPI is disabled
* acpi-soc:
ACPI: LPSS: Use kstrtol() instead of simple_strtol()
* acpi-misc:
ACPI: NVS: fix doc warnings in nvs.c
ACPI: NUMA: fix typo in a comment
ACPI: OSL: Use DEFINE_RES_IO_NAMED() to simplify code
ACPI: bus: Call kobject_put() in acpi_init() error path
ACPI: bus: Remove unneeded assignment
ACPI: configfs: Replace ACPI_INFO() with pr_debug()
ACPI: ipmi: Remove address space handler in error path
ACPI: event: Remove redundant initialization of local variable
ACPI: sbshc: Fix fall-through warning for Clang
* acpi-prm:
ACPI: PRM: make symbol 'prm_module_list' static
ACPI: Add \_SB._OSC bit for PRM
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype
* acpi-sysfs:
ACPI: sysfs: Remove tailing return statement in void function
ACPI: sysfs: Use __ATTR_RO() and __ATTR_RW() macros
ACPI: sysfs: Sort headers alphabetically
ACPI: sysfs: Refactor param_get_trace_state() to drop dead code
ACPI: sysfs: Unify pattern of memory allocations
ACPI: sysfs: Allow bitmap list to be supplied to acpi_mask_gpe
ACPI: sysfs: Make sparse happy about address space in use
ACPI: sysfs: fix doc warnings in device_sysfs.c
ACPI: sysfs: Drop four redundant return statements
ACPI: sysfs: Fix a buffer overrun problem with description_show()
* acpi-x86:
x86/acpi: Switch to pr_xxx log functions
The ACPI Virtual I/O Translation Table describes topology of
para-virtual platforms, similarly to vendor tables DMAR, IVRS and IORT.
For now it describes the relation between virtio-iommu and the endpoints
it manages.
Three steps are needed to configure DMA of endpoints:
(1) acpi_viot_init(): parse the VIOT table, find or create the fwnode
associated to each vIOMMU device. This needs to happen after
acpi_scan_init(), because it relies on the struct device and their
fwnode to be available.
(2) When probing the vIOMMU device, the driver registers its IOMMU ops
within the IOMMU subsystem. This step doesn't require any
intervention from the VIOT driver.
(3) viot_iommu_configure(): before binding the endpoint to a driver,
find the associated IOMMU ops. Register them, along with the
endpoint ID, into the device's iommu_fwspec.
If step (3) happens before step (2), it is deferred until the IOMMU is
initialized, then retried.
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210618152059.1194210-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Notice that the table field of struct acpi_table_events_work is never
read and its event field is always equal to ACPI_TABLE_EVENT_LOAD, so
both of them are redundant.
Accordingly, drop struct acpi_table_events_work and use struct
work_struct directly instead of it, simplify acpi_scan_table_handler()
and rename it to acpi_scan_table_notify().
Moreover, make acpi_bus_table_handler() check the event code against
ACPI_TABLE_EVENT_LOAD before calling acpi_scan_table_notify(), so it
is not necessary to do that check in the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
context->ret.pointer already gets set to NULL at the beginning of
acpi_run_osc() and it only gets assigned a new value in the success
path near the end of acpi_run_osc(), so the clearing of
context->ret.pointer (when status != AE_OK) at the end of
acpi_run_osc() is redundant since it will always already be NULL when
status != AE_OK.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Platform Runtime Mechanism (PRM) is a firmware interface that exposes
a set of binary executables that can either be called from the AML
interpreter or device drivers by bypassing the AML interpreter.
This change implements the AML interpreter path.
According to the specification [1], PRM services are listed in an
ACPI table called the PRMT. This patch parses module and handler
information listed in the PRMT and registers the PlatformRtMechanism
OpRegion handler before ACPI tables are loaded.
Each service is defined by a 16-byte GUID and called from writing a
26-byte ASL buffer containing the identifier to a FieldUnit object
defined inside a PlatformRtMechanism OperationRegion.
OperationRegion (PRMR, PlatformRtMechanism, 0, 26)
Field (PRMR, BufferAcc, NoLock, Preserve)
{
PRMF, 208 // Write to this field to invoke the OperationRegion Handler
}
The 26-byte ASL buffer is defined as the following:
Byte Offset Byte Length Description
=============================================================
0 1 PRM OperationRegion handler status
1 8 PRM service status
9 1 PRM command
10 16 PRM handler GUID
The ASL caller fills out a 26-byte buffer containing the PRM command
and the PRM handler GUID like so:
/* Local0 is the PRM data buffer */
Local0 = buffer (26){}
/* Create byte fields over the buffer */
CreateByteField (Local0, 0x9, CMD)
CreateField (Local0, 0x50, 0x80, GUID)
/* Fill in the command and data fields of the data buffer */
CMD = 0 // run command
GUID = ToUUID("xxxx-xx-xxx-xxxx")
/*
* Invoke PRM service with an ID that matches GUID and save the
* result.
*/
Local0 = (\_SB.PRMT.PRMF = Local0)
Byte offset 0 - 8 are written by the handler as a status passed back to AML
and used by ASL like so:
/* Create byte fields over the buffer */
CreateByteField (Local0, 0x0, PSTA)
CreateQWordField (Local0, 0x1, USTA)
In this ASL code, PSTA contains a status from the OperationRegion and
USTA contains a status from the PRM service.
The 26-byte buffer is recieved by acpi_platformrt_space_handler. This
handler will look at the command value and the handler guid and take
the approperiate actions.
Command value Action
=====================================================================
0 Run the PRM service indicated by the PRM handler
GUID (bytes 10-26)
1 Prevent PRM runtime updates from happening to the
service's parent module
2 Allow PRM updates from happening to the service's parent module
This patch enables command value 0.
Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1]
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 719e1f561a ("ACPI: Execute platform _OSC also with query bit
clear") makes acpi_bus_osc_negotiate_platform_control() not only query
the platforms capabilities but it also commits the result back to the
firmware to report which capabilities are supported by the OS back to
the firmware
On certain systems the BIOS loads SSDT tables dynamically based on the
capabilities the OS claims to support. However, on these systems the
_OSC actually clears some of the bits (under certain conditions) so what
happens is that now when we call the _OSC twice the second time we pass
the cleared values and that results errors like below to appear on the
system log:
ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210105/psargs-330)
ACPI Error: Aborting method \_PR.PR01._CPC due to previous error (AE_NOT_FOUND) (20210105/psparse-529)
In addition the ACPI 6.4 spec says following [1]:
If the OS declares support of a feature in the Support Field in one
call to _OSC, then it must preserve the set state of that bit
(declaring support for that feature) in all subsequent calls.
Based on the above we can fix the issue by passing the same set of
capabilities to the platform wide _OSC in both calls regardless of the
query flag.
While there drop the context.ret.length checks which were wrong to begin
with (as the length is number of bytes not elements). This is already
checked in acpi_run_osc() that also returns an error in that case.
Includes fixes by Hans de Goede.
[1] https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#sequence-of-osc-calls
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213023
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1963717
Fixes: 719e1f561a ("ACPI: Execute platform _OSC also with query bit clear")
Cc: 5.12+ <stable@vger.kernel.org> # 5.12+
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Although the system will not be in a good condition or it will not
boot if acpi_bus_init() fails, it is still necessary to put the
kobject in the error path before returning to avoid leaking memory.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When acpi_kobj is NULL already, assigning NULL to it is redundant,
so don't do that.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In commit ee98460b2f ("ACPI: bus: Clean up printing messages"),
direct printk() invocations was replaced with the matching pr_*()
calls, but the left two printk() calls was merged at the same time
with the above cleaup commit, so we missed them for cleanup, let's
replace them now and we can remove the use of PREFIX later.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update ACPICA code in the kernel to upstream revision 20201113
with changes as follows:
* Remove the MTMR (Mid-Timer) table (Al Stone).
* Remove the VRTC table (Al Stone).
* Add type casts for string functions (Bob Moore).
* Update all copyrights to 2021 (Bob Moore).
* Fix exception code class checks (Maximilian Luz).
* Clean up exception code class checks (Maximilian Luz).
* Fix -Wfallthrough (Nick Desaulniers).
- Add support for setting and reading global profile of the platform
along with documentation (Mark Pearson, Hans de Goede, Jiaxun Yang).
- Fix fwnode properties matching and clean up the code handling
device properties and its documentation (Rafael Wysocki, Andy
Shevchenko).
- Clean up ACPI-based device enumeration code (Rafael Wysocki).
- Clean up the CPPC support library code (Ionela Voinescu).
- Clean up the APEI support code (Yang Li, Yazen Ghannam).
- Update GPIO-related properties documentation (Flavio Suligoi).
- Consolidate and clean up the printing of messages in several
places (Rafael Wysocki).
- Fix error code path in configfs handling code (Qinglang Miao).
- Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray).
- Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in
multiple places (Bjorn Helgaas).
-----BEGIN PGP SIGNATURE-----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=WpL7
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20210105, fix and clean up the handling of device properties, add
support for setting global profile of the platform, clean up device
enumeration, the CPPC library, the APEI support and more, update the
documentation, consolidate the printing of messages in several places
and make assorted janitorial changes.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20201113 with
changes as follows:
* Remove the MTMR (Mid-Timer) table (Al Stone).
* Remove the VRTC table (Al Stone).
* Add type casts for string functions (Bob Moore).
* Update all copyrights to 2021 (Bob Moore).
* Fix exception code class checks (Maximilian Luz).
* Clean up exception code class checks (Maximilian Luz).
* Fix -Wfallthrough (Nick Desaulniers).
- Add support for setting and reading global profile of the platform
along with documentation (Mark Pearson, Hans de Goede, Jiaxun
Yang).
- Fix fwnode properties matching and clean up the code handling
device properties and its documentation (Rafael Wysocki, Andy
Shevchenko).
- Clean up ACPI-based device enumeration code (Rafael Wysocki).
- Clean up the CPPC support library code (Ionela Voinescu).
- Clean up the APEI support code (Yang Li, Yazen Ghannam).
- Update GPIO-related properties documentation (Flavio Suligoi).
- Consolidate and clean up the printing of messages in several places
(Rafael Wysocki).
- Fix error code path in configfs handling code (Qinglang Miao).
- Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray).
- Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in
multiple places (Bjorn Helgaas)"
* tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
ACPI: property: Satisfy kernel doc validator (part 2)
ACPI: property: Satisfy kernel doc validator (part 1)
ACPI: property: Make acpi_node_prop_read() static
ACPI: property: Remove dead code
ACPI: property: Fix fwnode string properties matching
ACPI: OSL: Clean up printing messages
ACPI: OSL: Rework acpi_check_resource_conflict()
ACPI: APEI: ERST: remove unneeded semicolon
ACPI: thermal: Clean up printing messages
ACPI: video: Clean up printing messages
ACPI: button: Clean up printing messages
ACPI: battery: Clean up printing messages
ACPI: AC: Clean up printing messages
ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
ACPI: utils: Clean up printing messages
ACPI: scan: Clean up printing messages
ACPI: bus: Clean up printing messages
ACPI: PM: Clean up printing messages
ACPI: power: Clean up printing messages
ACPI: APEI: Add is_generic_error() to identify GHES sources
...
Replace all of the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in bus.c with pr_debug() and pr_info(), respectively, drop the
_COMPONENT and ACPI_MODULE_NAME() definitions that are not used any
more and replace direct printk() invocations with the matching
pr_*() calls (with a couple of exceptions where the log level is
decreased).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI 6.4 introduced a new _OSC capability that is used negotiate native
connection manager support. Connection manager is the entity that is
responsible for tunneling over the USB4 fabric. If the platform rejects
the native access then firmware based connection manager is used.
The new _OSC also includes a set of bits that can be used to disable
certain tunnel types such as PCIe for security reasons for instance.
This implements the new USB4 _OSC so that we try to negotiate native
USB4 support if the Thunderbolt/USB4 (CONFIG_USB4) driver is enabled.
Drivers can determine what was negotiated by checking two new variables
exposed in this patch.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The platform _OSC can change the hardware state when query bit is not
set. According to ACPI spec it is recommended that the OS runs _OSC with
query bit set until the platform does not mask any of the capabilities.
Then it should run it with query bit clear in order to actually commit
the changes. Linux has not been doing this for the reasons that there
has not been anything to commit, until now.
The ACPI 6.4 introduced _OSC for USB4 to allow the OS to negotiate
native control over USB4 tunneling. The platform might implement this so
that it only activates the software connection manager path when the OS
calls the _OSC with the query bit clear. Otherwise it may default to the
firmware connection manager, for instance.
For this reason modify the _OSC support so that we first execute it with
query bit set, then use the returned value as base of the features we
want to control and run the _OSC again with query bit clear. This also
follows what Windows is doing.
Also rename the function to better match what it does.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Here is the big set of USB, PHY, and Thunderbolt driver updates for
5.10-rc1.
Lots of tiny different things for these subsystems are in here,
including:
- phy driver updates
- thunderbolt / USB 4 updates and additions
- USB gadget driver updates
- xhci fixes and updates
- typec driver additions and updates
- api conversions to various drivers for core kernel api changes
- new USB control message functions to make it harder to get
wrong, as found by syzbot (took 2 tries to get it right)
- lots of tiny USB driver fixes and updates all over the place
All of these have been in linux-next for a while, with the exception of
the last "obviously correct" patch that updated a FALLTHROUGH comment
that got merged last weekend.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4hAAg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfRACcCp48StLg4V7XcZ41eQYES/DVwxkAnjnZs+La
Y7F+o2p8DiuLLQamdEyB
=lHr1
-----END PGP SIGNATURE-----
Merge tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY/Thunderbolt driver updates from Greg KH:
"Here is the big set of USB, PHY, and Thunderbolt driver updates for
5.10-rc1.
Lots of tiny different things for these subsystems are in here,
including:
- phy driver updates
- thunderbolt / USB 4 updates and additions
- USB gadget driver updates
- xhci fixes and updates
- typec driver additions and updates
- api conversions to various drivers for core kernel api changes
- new USB control message functions to make it harder to get wrong,
as found by syzbot (took 2 tries to get it right)
- lots of tiny USB driver fixes and updates all over the place
All of these have been in linux-next for a while, with the exception
of the last "obviously correct" patch that updated a FALLTHROUGH
comment that got merged last weekend"
* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
usb: musb: gadget: Use fallthrough pseudo-keyword
usb: typec: Add QCOM PMIC typec detection driver
USB: serial: option: add Cellient MPL200 card
usb: typec: tcpci_maxim: Add support for Sink FRS
usb: typec: tcpci: Implement callbacks for FRS
usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
usb: typec: tcpci_maxim: Chip level TCPC driver
usb: typec: tcpci: Add set_vbus tcpci callback
usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
USB: serial: ftdi_sio: use cur_altsetting for consistency
USB: serial: option: Add Telit FT980-KS composition
USB: core: remove polling for /sys/kernel/debug/usb/devices
usb: typec: add support for STUSB160x Type-C controller family
usb: typec: add typec_find_pwr_opmode
usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
...
Until we tell ACPI that we support generic initiators, it will have
to operate in fall back domain mode and all _PXM entries should
be on existing non GI domains.
This patch sets the relevant OSC bit to make that happen.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This function will be needed by the Thunderbolt driver when it parses
ACPI description for linking tunneled ports to the Thunderbolt
controller device.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
kmemleak reported backtrace:
[<bbee0454>] kmem_cache_alloc_trace+0x128/0x260
[<6677f215>] i2c_acpi_install_space_handler+0x4b/0xe0
[<1180f4fc>] i2c_register_adapter+0x186/0x400
[<6083baf7>] i2c_add_adapter+0x4e/0x70
[<a3ddf966>] intel_gmbus_setup+0x1a2/0x2c0 [i915]
[<84cb69ae>] i915_driver_probe+0x8d8/0x13a0 [i915]
[<81911d4b>] i915_pci_probe+0x48/0x160 [i915]
[<4b159af1>] pci_device_probe+0xdc/0x160
[<b3c64704>] really_probe+0x1ee/0x450
[<bc029f5a>] driver_probe_device+0x142/0x1b0
[<d8829d20>] device_driver_attach+0x49/0x50
[<de71f045>] __driver_attach+0xc9/0x150
[<df33ac83>] bus_for_each_dev+0x56/0xa0
[<80089bba>] driver_attach+0x19/0x20
[<cc73f583>] bus_add_driver+0x177/0x220
[<7b29d8c7>] driver_register+0x56/0xf0
In i2c_acpi_remove_space_handler(), a leak occurs whenever the
"data" parameter is initialized to 0 before being passed to
acpi_bus_get_private_data().
This is because the NULL pointer check in acpi_bus_get_private_data()
(condition->if(!*data)) returns EINVAL and, in consequence, memory is
never freed in i2c_acpi_remove_space_handler().
Fix the NULL pointer check in acpi_bus_get_private_data() to follow
the analogous check in acpi_get_data_full().
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
[ rjw: Subject & changelog ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rather than setting debug output flags during early init, its makes
more sense to simply re-define ACPI_DEBUG_DEFAULT specifically for
Linux.
ACPICA commit 60903715711f4b00ca1831779a8a23279a66497d
Link: https://github.com/acpica/acpica/commit/60903715
Fixes: ce5cbf5349 ("ACPI: Set debug output flags independent of ACPICA")
Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the PRP0001 case, the compatible string may have additional data
affiliated with the device. When we call device_get_match_data() on
such device, we will get nothing since currently
acpi_device_get_match_data() doesn't respect PRP0001.
To fix the above, try acpi_of_match_device() if there is no ACPI
table in the driver.
Anyway, note that the device is expected to get its own proper
ACPI ID.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There was a divergence between Linux and ACPICA on the definition of
ACPI_DEBUG_DEFAULT. This divergence was solved by taking ACPICA's
definition in 4c1379d7bb. After resolving the divergence, it was
clear that Linux users wanted to use their old set of debug flags.
This change fixes the divergence by setting these debug flags during
acpi_early_init() rather than during global variable initialization
in acpixf.h (owned by ACPICA).
Fixes: 4c1379d7bb ("ACPICA: Debug output: Add option to display method/object evaluation")
Reported-by: Michael J Ruhl <michael.j.ruhl@intel.com>
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some systems have had functional issues since commit 5a8361f7ec
(ACPICA: Integrate package handling with module-level code) that,
among other things, changed the initial values of the
acpi_gbl_group_module_level_code and acpi_gbl_parse_table_as_term_list
global flags in ACPICA which implicitly caused acpi_ec_ecdt_probe() to
be called before acpi_load_tables() on the vast majority of platforms.
Namely, before commit 5a8361f7ec, acpi_load_tables() was called from
acpi_early_init() if acpi_gbl_parse_table_as_term_list was FALSE and
acpi_gbl_group_module_level_code was TRUE, which almost always was
the case as FALSE and TRUE were their initial values, respectively.
The acpi_gbl_parse_table_as_term_list value would be changed to TRUE
for a couple of platforms in acpi_quirks_dmi_table[], but it remained
FALSE in the vast majority of cases.
After commit 5a8361f7ec, the initial values of the two flags have
been reversed, so in effect acpi_load_tables() has not been called
from acpi_early_init() any more. That, in turn, affects
acpi_ec_ecdt_probe() which is invoked before acpi_load_tables() now
and it is not possible to evaluate the _REG method for the EC address
space handler installed by it. That effectively causes the EC address
space to be inaccessible to AML on platforms with an ECDT matching the
EC device definition in the DSDT and functional problems ensue in
there.
Because the default behavior before commit 5a8361f7ec was to call
acpi_ec_ecdt_probe() after acpi_load_tables(), it should be safe to
do that again. Moreover, the EC address space handler installed by
acpi_ec_ecdt_probe() is only needed for AML to be able to access the
EC address space and the only AML that can run during acpi_load_tables()
is module-level code which only is allowed to access address spaces
with default handlers (memory, I/O and PCI config space).
For this reason, move the acpi_ec_ecdt_probe() invocation back to
acpi_bus_init(), from where it was taken away by commit d737f333b2
(ACPI: probe ECDT before loading AML tables regardless of module-level
code flag), and put it after the invocation of acpi_load_tables() to
restore the original code ordering from before commit 5a8361f7ec.
Fixes: 5a8361f7ec ("ACPICA: Integrate package handling with module-level code")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199981
Reported-by: step-ali <sunmooon15@gmail.com>
Reported-by: Charles Stanhope <charles.stanhope@gmail.com>
Tested-by: Charles Stanhope <charles.stanhope@gmail.com>
Reported-by: Paulo Nascimento <paulo.ulusu@googlemail.com>
Reported-by: David Purton <dcpurton@marshwiggle.net>
Reported-by: Adam Harvey <adam@adamharvey.name>
Reported-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Jean-Marc Lenoir <archlinux@jihemel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of relying on the "platform_notify" callback hook,
introducing separate notification function
acpi_platform_notify() and calling that directly from
drivers core when device entries are added and removed.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It was discovered that AML tables were loaded before or after the
ECDT depending on acpi_gbl_execute_tables_as_methods. According to
the ACPI spec, the ECDT should be loaded before the namespace is
populated by loading AML tables (DSDT and SSDT). Since the ECDT
should be loaded early in the boot process, this change moves the
ECDT probing to acpi_early_init.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Calling dmi_check_system() early only works on X86. Other
architectures initialize the DMI subsystem later so it's not
ready yet when ACPI itself gets initialized.
In the best case it results in a useless call to a function which
will do nothing. But depending on the dmi implementation, it could
also result in warnings. Best is to not call the function when it
can't work and isn't needed.
Additionally, if anyone ever needs to add non-x86 quirks, it would
surprisingly not work, so document the limitation to avoid confusion.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: cce4f632db (ACPI: fix early DSDT dmi check warnings on ia64)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki
Ilkka Koskinen
Shuai Xue
Linus Torvalds
Sudeep Holla
Heikki Krogerus
Hans de Goede
Uwe Kleine-König
Aubrey Li
Joerg Roedel
Jean-Philippe Brucker
Erik Kaneda
Mika Westerberg
Hanjun Guo
Mario Limonciello
Jonathan Cameron
Vamshi K Sthambamkadi
Thomas Gleixner
Erik Schmauss
Andy Shevchenko
Jean Delvare